4-IN-1 WIRELESS CHARGER

Product Introduction

Thank you for purchasing our product 4-IN-1 Wireless Charger. It uses a high-end fast wireless charging chip and features a luxurious and compact design. It is compatible with any mobile phone that meets the Qi standard. It is perfectly compatible with iPhone 12 and above. Other mobile phones with wireless charging function need to be used with a magnetic phone case, effectively saving more time and improving your charging experience.

Product Outline

The main unit of the 4-in-1 Wireless Charger is depicted. It features a primary charging area for mobile phones, a separate area for watch charging, and a dedicated spot for TWS (True Wireless Stereo) earbuds. Indicator lights and a touch-controlled night lantern are also visible. The device includes heat dissipation holes for efficient operation and a Type-C port for power input. A folding button is present, and the base is equipped with four non-slip mats to ensure stability.

• Mobile phone magnetic wireless charging area
• Watch wireless charging area
• TWS wireless charging area
• Charging indicator and night light touch light
• Night lantern
• Folding button
• Type-C port
• Heat dissipation hole
• Non-slip mat * 4

Applicable Devices

Note: All devices must be Qi standard.

1. Devices with built-in quick charge/normal charge wireless receiver.
2. Devices with outer-face wireless charging receiver.
3. Devices with wireless charging receiver in its protection case.

Instructions

1. The wireless charger connects to the AC power supply via the power adapter. Upon powering on, the indicator light shows a solid white, indicating standby mode.
2. When a mobile phone or TWS earbuds are charging, their respective indicator lights blink blue. After full charging, the indicator light turns solid. The watch charging indicator light behavior is different and does not change upon full charge. Frequent flashing of red and blue indicators signifies foreign object detection. Note: If the watch battery is very low, charging may be slower. It is recommended to charge when the watch battery is around 10%. Patience may be required for initial charging if the battery is depleted.
3. The touch switch for the night light is located between the mobile phone and earbud indicators. A single click turns the light on or off. A long press will gradually brighten or dim the light.

Specifications

Standard Accessories

• 1* 4-IN-1 Wireless Charger
• 1* User Manual
• 1* USB Cable

FCC STATEMENT

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.

Warning: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the separation between the equipment and receiver.
• Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for help.

FCC Radiation Exposure Statement

This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20cm between the radiator & your body.

Compliance Marks

[CE mark] [FCC logo] [Recycling symbol] RoHS MADE IN CHINA