VEVOR Automatic Chicken Coop Door Opener

Product Overview

The VEVOR Automatic Chicken Coop Door Opener is designed to provide a convenient and modern solution for homesteading. Utilizing advanced technology in a compact design, it supports homesteading goals by making daily tasks easier. The product is made to support homesteading goals and to help make homesteading easier. VEVOR is committed to providing tools with competitive prices. Expressions like "Save Half" or "Half Price" represent an estimate of potential savings compared to major brands and do not guarantee savings across all product categories.

Contact Information: For product questions or technical support, please visit www.vevor.com/support.

This document contains the original instructions. Please read all manual instructions carefully before operating. VEVOR reserves the right to interpret its user manual. The appearance of the product is subject to the item received. VEVOR may not provide further notice for technology or software updates.

Important Safeguards

⚠️? Read all safety warnings, instructions, illustrations, and specifications provided with this electrical appliance. Failure to follow all instructions may result in electric shock, fire, and/or serious injury.

Warnings & Cautions

• ⚠️ To reduce risk of electric shock, do not disassemble this product.
• ⚡️ Use the AC/DC Power Adapter and cable provided with the unit. Using other cables can result in shock, fire, or damage to the unit.
• ⚠️ If the supply cord (AC/DC Power Adapter) is damaged, it must be replaced by the manufacturer, its service agent, or similarly qualified persons to avoid a hazard.
• ✔️ Ensure the unit is connected to the power source properly.
• ❌ Do not use the unit if the power cord is damaged or if the plug socket contact is loose. Only use the AC/DC Power Adapter with a 100-240V AC power source.
• ⚡️ Run the power supply to a protected area or build power supply housing to protect the power plug from weather. (It is recommended to run the cord through a hole in the chicken coop and plug it in on the interior.)
• ? This appliance can be used by children aged 8 years and above, and by persons with reduced physical, sensory, or mental capabilities, or lack of experience and knowledge, if they have been given supervision or instruction concerning the safe use of the appliance and understand the hazards involved. Children shall not play with the appliance. Cleaning and user maintenance shall not be performed by children without supervision.

FCC Information

CAUTION: Changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment!

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:

1. This product may cause harmful interference.
2. This product must accept any interference received, including interference that may cause undesired operation.

WARNING: Changes or modifications to this product not expressly approved by the party responsible for compliance could void the user's authority to operate the product.

Note: This product has been tested and found to comply with the limits for a Class B digital device pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation.

This product generates, uses, and can radiate radio frequency energy, and if not installed and used in accordance with the instructions, may cause harmful interference to radiocommunications. However, there is no guarantee that interference will not occur in a particular installation. If this product does cause harmful interference to radio or television reception, which can be determined by turning the product off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

• Reorient or relocate the receiving antenna.
• Increase the distance between the product and receiver.
• Connect the product to an outlet on a circuit different from that to which the receiver is connected.
• Consult the dealer or an experienced radio/TV technician for assistance.

Product Introduction

Diagram Description: A front view of the VEVOR Automatic Chicken Coop Door. It's a rectangular unit with a sliding door mechanism on the right side. The top section contains the control panel and an infrared sensor.

Components:

• 1. Chicken Coop Door: The main sliding panel.
• 2. Control Panel: Located at the top of the unit, houses the display and buttons.
• 3. Infrared sensor: Detects animals and ambient light.
• 4. DC/Solar Female Plug: Port for power input.
• 5. AC/DC Power Adapter: Includes cord and DC male plug for powering the unit.
• 6. Wireless Remote Control: Used for manual operation (Batteries A27/12V sold separately).
• 7. Self-tapping screws and screwdriver: For mounting the door frame.
• 8. Internal Battery Pack: Provides backup power supply.

Installation Introduction

Diagram Description: Shows the installation of the Chicken Coop Door Frame onto a chicken coop wall. Callouts indicate: 1. Chicken Coop Door Frame, 2. Screw Installation Location (mounting points), 3. Chicken Coop Structure/Wall (with a hole for frame installation), and 4. Hole for power supply to run through. Dimensions are shown: 8.3 inches in width and 10.24 inches in height for the door opening.

Installation Steps:

1. Verify or create an opening in the chicken door structure/wall suitable for the chicken coop door frame. The required opening width is 8.3 inches and height is 10.24 inches.
2. Attach the chicken coop door frame to the chicken coop structure/wall using the self-tapping screws. DO NOT OVERTIGHTEN, AS THIS CAN COMPRESS THE DOOR AND PREVENT IT FROM OPENING. Ensure the frame is flat against the structure with no gaps or warps after screws are installed. A power tool is recommended for installing screws.
3. Connect the DC Male Plug of the AC/DC Power Adapter to one of the DC Female Plugs on the chicken coop door.
4. Connect the AC/DC Power Adapter to a power source. The Digital Display will illuminate, confirming the unit is on. Ensure the power source is protected from weather by plugging it into the interior of the coop or by using a simple power supply box.
5. For instructions on using the light sensor or timer, refer to pages 10-11.
6. If the door is not opening or closing fully, try loosening the mounting screws. The door can become pinched if installed too tightly.
7. If the door is not closing after programming, try turning the power off and then on again, and attempt to close it.
8. If there is exterior trim or other elements that might cause uneven installation, use 2x4s or flat pieces of wood to ensure the frame is flush.
9. Use two 1" wooden spacers and install them above the door, aligned with the width of the holes in the rain shield.
10. Install the rain shield onto the two wooden spacers so the door can move up and behind it.

General Installation Continued (Infrared Sensor)

• The infrared sensor is built into the door.
• A red light ? on the sensor indicates when something is blocking the infrared ray. The door will not close while this light is illuminated.
• The animal sensing probe is shown in the diagram. When the door descends, the probe senses an animal (indicated by action+temperature and a blue light ?). The door will then return to its raised position. After 1 minute, it will continue to descend. After a power outage, restarting the probe requires about 15 seconds of preheating (until the blue light goes out) for normal operation.

Control Panel Introduction

Diagram Description: A detailed view of the Control Panel and its functions. The Digital Display shows time and operational status. Buttons are labeled: ⚙️ (SET), ▲ (UP), ▼ (DOWN), ▶️ [Test], ? [Learn]. Indicator lights are described: Light 1 (Green for open, Red for close), Light 2 (Infrared sensor status), Light 3 (Light sensor status).

Programming the Wireless Remote Control(s)

1. Verify that the remote control battery(s) are installed correctly and are fully charged. Replace batteries if required.
2. To pair a remote control to the chicken coop door, push and hold the LEARN button ? on the control panel for 2 seconds. Then, press any button on the remote control twice. The green LED will flash twice, indicating successful pairing. Repeat this step to pair a second remote control.
3. To un-pair all remote controls, push and hold the LEARN button ? until the green LED flashes twice, indicating cancellation is complete.

Note: If power is removed from the chicken coop door for a short period and then reapplied, the remote control(s) will remain paired.

Remote Control Parameters:

• Frequency: 433MHz
• Bull-in chip: EV1527
• Materials: ABS+aluminum alloy
• Size: 5.5" x 1.38cm
• Launch range: up to 40 meters

2.0 - Open/Close Chicken Coop Door With Remote Control

• Push the Up Arrow button ▲ to open the door.
• Push the Down Arrow button ▼ to close the door.
• Push the Square button ⏹️ to stop any movement of the door.

3.0 - Open/Close Chicken Coop Door Without Remote Control

Sequentially pushing the Test button ▶️ [Test] on the control panel will open or close the door.

• Push the Test button ▶️ [Test] on the control panel. The door will open.
• Push the Test button ▶️ [Test] on the control panel again. The door will stop moving.
• Push the Test button ▶️ [Test] on the control panel a third time. The door will close.

4.0 - Programming the Chicken Coop Door

1. Screen Wake Up

• Button wake-up: Press the SET ⚙️ or TEST ▶️ [Test] button once to turn on the screen for about 1 second.
• Remote control wake-up: Press and hold any key on the remote control for about 5 seconds to light up the screen.

2. Setting Manual Door Opening or Closing

Diagram Description: Image of the control panel display showing the manual open/close interface.

• Connect the power supply; the display screen will show the current status.
• Push the TEST ▶️ [Test] button once to open the door.
• Press the TEST ▶️ [Test] button once to pause.
• Press the TEST ▶️ [Test] button again to close the door.

3. Setting the Local Time (24 Hour Time Format)

Diagram Description: Image of the control panel display showing the time setting interface.

• Push the SET ⚙️ button on the control panel to display the time setting.
• The Hours time unit will flash. Adjust the Hours by pushing the UP ▲ or DOWN ▼ button.
• Push the SET ⚙️ button to switch to the Minutes time unit. The Minutes time unit will flash.
• Adjust the Minutes by pushing the UP ▲ or DOWN ▼ button.
• Push the SET ⚙️ button to confirm the time setting and proceed to the next setting. Sequentially pushing the SET ⚙️ button will cycle through different settings to be programmed.

Advanced Features & Programming

4. Set Timing and Light Sensing Mixed Mode

Diagram Description: Images of the control panel display showing different mode indicators.

• Push the SET ⚙️ button for one second on the control panel to display the mode.
• T-T: Indicates time to open the door - time to close the door.
• Push the UP ▲ button for one second on the control panel to display the next mode.
• T-L: Indicates time to open the door - light to close the door.
• Push the UP ▲ button for one second on the control panel to display the next mode.
• L-T: Indicates light to open the door - time to close the door.
• Push the UP ▲ button for one second on the control panel to display the next mode.
• L-L: Indicates light to open the door - light to close the door.

5. Turning option on so that the Door opens or closes automatically with the Local Time Setting and Timer

Diagram Description: Image of the control panel display showing the OPEN-T mode.

• Verify/Push the SET ⚙️ button on the control panel to display OPEN-T.
• The Hours time unit will flash. Adjust the Hours by pushing the UP ▲ or DOWN ▼ button.
• Push the SET ⚙️ button to switch to the Minutes time unit. The Minutes time unit will flash.
• Adjust the Minutes by pushing the UP ▲ or DOWN ▼ button.

6. Turning option on so that the Door opens or closes automatically with the Ambient Light Brightness Setting

Diagram Description: Image of the control panel display showing the OPEN-L mode.

• Verify/Push the SET ⚙️ button on the control panel to display OPEN-L.
• The Lumen value unit will flash. Adjust the Lumen value unit by pushing the UP ▲ or DOWN ▼ button.
• Adjust the Lumen value unit by pushing the UP ▲ or DOWN ▼ button.

Remember, For Open:

• 23 = The most light for the door to open.
• 0 = The least light for the door to open.

Remember, For Close:

• 23 = The least light for door to close.
• 0 = The most light for the door to close.

It is recommended to set the sensitivity around 15. If the sensitivity value is too strong, the chicken coop door may open and close with minimal light changes.

7. Close option on so that the Door opens or closes automatically with the Local Time Setting and Timer

Diagram Description: Image of the control panel display showing the CLOSE-T mode.

• Verify/Push the SET ⚙️ button on the control panel to display CLOSE-T.
• The Hours time unit will flash. Adjust the Hours by pushing the UP ▲ or DOWN ▼ button.
• Push the SET ⚙️ button to switch to the Minutes time unit. The Minutes time unit will flash.
• Adjust the Minutes by pushing the UP ▲ or DOWN ▼ button.

8. Close option on so that the Door opens or closes automatically with the Ambient Light Brightness Setting

Diagram Description: Image of the control panel display showing the CLOSE-L mode.

• Verify/Push the SET ⚙️ button on the control panel to display CLOSE-L.
• The Lumen value unit will flash. Adjust the Lumen value unit by pushing the UP ▲ or DOWN ▼ button.
• Adjust the Lumen value unit by pushing the UP ▲ or DOWN ▼ button.

It is recommended to set the sensitivity around 15. If the sensitivity value is too strong, the chicken coop door may open and close with minimal light changes.

Power Options and Charging

The chicken coop door is equipped with an automatic charging function.

1. How to Use the Battery:

• Rechargeable Battery: Uses No.5 1.2V nickel hydrogen rechargeable batteries. The 4PCS control board has a voltage stabilizing function and automatically stops when the battery is fully charged.
• Standard Battery: Uses 4PCS AA 1.5V No.5 batteries.

2. Solar Charging Panel Charging:

Output: 9V 10W solar charging panel (as shown in the figure).

Diagram Description: Illustrates the connection of the rechargeable battery and the solar charging panel to the main unit.

Note: If the solar power supply is used, AA batteries cannot be used. 1.2V Ni-MH/Ni-Cr batteries are required.

Diagram Description: Shows the solar charging setup, including a solar panel, a solar charge controller, a battery, and the connection to the chicken coop door.

CAUTION: DO NOT TOUCH LEAD WIRES TOGETHER!

What you need for Solar Setup:

• 10W-25W Solar Panel
• 9V 10Amp Solar Charge Controller
• 9V 10AmpHour Battery

Solar Setup Instructions:

1. Install the Solar Panel in a direction that optimizes for sunlight.
2. Connect the solar panel to the solar charge controller.
3. Connect the battery to the solar charge controller.
4. Connect the automatic chicken coop door to the solar charge controller.
5. Protect the solar charge controller and battery by enclosing them to shield them from rain/weather.

Images: Examples of Solar Charge Controller and 25W Solar Panel are shown.

Maintenance & Troubleshooting

Remote Control(s) Not Working

• Check that the remote control battery(s) are installed in the correct direction and are fully charged. Replace batteries if required.
• Ensure the remote is programmed to the Chicken Coop Door correctly.
• Check that the Chicken Coop Door is powered on.

Chicken Coop Door Does Not Power On

• Ensure there is power going to the unit.
• Check the electrical connections powering the unit to ensure they are not dirty or damaged.

Chicken Coop Door Does Not Open and/or Close Automatically with the Local Time or Brightness Settings

• Check to see if the settings used are programmed correctly and the features are not turned off.

Timer Isn't Working Properly

Follow these instructions to diagnose whether your timer is faulty or the door settings were not set correctly:

1. Unplug the door from power.
2. Plug the door back in.
3. Do not change any other settings.
4. Reset the opening or closing time.
5. Wait until the door goes to specify the opening time (e.g., 0805) to confirm if the door opens.
6. If following these steps resolves the issue, program the door to your local time and your desired open/close times. Ensure to unplug the door again prior to doing so for a hard reset.

Can a Solar Panel or Backup Battery be used with the unit?

Yes, it can be connected/installed with the supplied DC Male Plug.

Does the Chicken Coop Door have to be installed on the inside or outside of the chicken coop?

It depends on how you plan to use it. If it is installed on the inside of a closed-off coop, the light sensitivity settings may not operate properly.

What to do if the Door Jams when opening or closing?

Ensure the door frame is installed flat against the wall and that there are no foreign debris in the path of travel of the door. Also, ensure the installation screws are not installed too tightly!

What to do if the Door does NOT open/close all of the way?

If the door is NOT closing, try to reset your power supply.

Correct Disposal

?️ This product is subject to the provision of European Directive 2012/19/EC. The symbol showing a wheelie bin crossed through indicates that the product requires separate refuse collection in the European Union. This applies to the product and all accessories marked with this symbol. Products marked as such may not be discarded with normal domestic waste, but must be taken to a collection point for recycling electrical and electronic devices.

Made In China