Simonrack Shelving Unit Safety and Usage Instructions
General Safety and Usage
Load Limits
Never exceed the specified maximum load per shelf and for the entire rack.
Ensure the load is evenly distributed over the entire shelf to avoid point loads.
Assembly and Installation
Follow the assembly instructions carefully and ensure all screws and fasteners are tight.
Shelving units must be firmly anchored to the wall to achieve maximum load capacity.
Maintenance and Safe Operation
Perform regular inspections to ensure there are no structural damages or loose parts.
Use proper lifting equipment and techniques to place and remove heavy loads to prevent injury or damage.
Do not climb on the shelves or use them as ladders.
Use only on flat surfaces.
Ensure the area around the shelves is free of obstacles to ensure safe working.
Read the entire manufacturer's instruction manual carefully and follow all listed safety precautions. Before use, read all manufacturer information. Warning instructions cover some risks but not all. Keep manuals for reference.
Child Safety and Packaging Warnings
Child Safety
Products should never be used by children or by persons with reduced physical, sensory or mental abilities or lack of experience and knowledge, unless the manufacturer's manual explicitly allows.
Children should never play unsupervised.
Cleaning and maintenance must not be performed by children.
Packaging Warning
⚠️ Risk of suffocation. Packaging materials are not toys. Keep packaging out of reach of children and people with reduced abilities.
Manufacturer Information
Simonrack
Address: C/ Polígono, C, 50461, Alfamén, (Zaragoza) ESPAÑA
Email: info@simonrack.com