mailto:info@forcegauge.net
Force Measurement | IMADA specializes in force measurement
User Manual for IMADA models including: FSA Series Force-Displacement Measurement Unit, FSA Series, Force-Displacement Measurement Unit, Measurement Unit
24 déc. 2021 — Only for use on PC. ... Instruction Manual, Inspection Certificate, Warranty Certificate, ... P90-200N. Hemispherical polyurethane Jig. Easy griping for.
IMADA CO., LTD. Force-displacement measuring system FSA series 2 / 7 2021/12/24 [Available data by FSA series] Hysteresis and returning zero For example, in click sensation test of tactile switch, hysteresis and returning zero is obvious from the graph
Fsa Connect Drivers › Url: https://www.forcegauge.net/wp-content/uploads/fsa e
File Info : application/pdf, 7 Pages, 548.21KB
DocumentDocumentIMADA CO., LTD. Force-displacement measuring system FSA series Force-Displacement Measurement Unit FSA series A measurement unit to draw force-displacement curves Ideal for sensation test or material characteristic evaluation High sampling rate and high data reproducibility The FSA series is a unit for forcedisplacement measurement including force gauge, test stand, cable and software. This unit is easy-handling owing to its compact size (desktop-type), enabling you to simply measure mechanical properties such as tension, compression and peeling force. Also, its high responsivity (2000Hz) offers precise measurement results with a smooth graph of force-displacement. Graphing is easily done by connecting FSA series and PC via attached USB cable. The graphing software equips useful functions for evaluation or analysis such as overlaying graphs for comparing, displaying statistical data, and leaving comments in a graph. It handles a wide range of measurement by using various optional attachments. Since the force gauge is removable, the range of measurement is expanded, and maintenance gets easier. Features Precise Measurement - High sampling rate (2000Hz) accurately follows force changes and draws smooth graph of force- displacement curves in real time. Outputs reports simply - Equips functions to overlay up to 5 graphs and leave comments in the graph. - Easily outputs the graphs and statical data to WORD, EXCEL, PDF, etc. A wide range of measurements - It handles a wide range of measurements by combining various optional attachments [Measuring examples of FSA series] Comprresion and tension tests of various materials/Simple evaluations of spring characteristics/Elasticity test of various materials/Insertion pressure evaluation of parts/Evaluation of switch characteristics/Peeling test of adhesive tape/Cushioning materials repulsion tests 1 / 7 2021/12/24 IMADA CO., LTD. Force-displacement measuring system FSA series [Available data by FSA series] Force value when the specified displacement is compressed/pulled (Displacement when compressed/pulled with the specified force value) 4.81(N 20.00(mm) This unit is suitable for characteristic evaluation of such as cushioning-materials or press-fitted parts by compression test since it allows drawing a force-displacement graph and evaluating transition of the force value to the compressed displacement. Also, as you see in the picture above, it enables you to easily search for the force value at a specific displacement value on the graph and leave a comment. Displacement value when a sample is broken by compressing/pulling 67.4(N 66.606(mm) Displacement when broken. The force rapidly rises against the displacement. The force slowly rises against the displacement. This unit graphs the process and enables you to visually check the force transition until the sample is broken. Also, it helps you to easily find the force/displacement value and peak value when the sample is broken, and leave a comment. Hysteresis and returning zero [ON] Point [OFF] Point For example, in click sensation test of tactile switch, hysteresis and returning zero is obvious from the graph of a reciprocating motion. It is simple to evaluate the graph by setting threshold value, searching for returning peak values and inserting an arbitrary border line. Moreover, the point of switch ON/OFF can be automatically defined and displayed by using Mark On function. Note: Custom-made cable is required for Mark-On function. 2 / 7 2021/12/24 IMADA CO., LTD. Force-displacement measuring system FSA series [FSA series components] Accessories and description 1.Force Gauge Measuring part of force measurement which Indicates force and displacement values. It can be removed from a test stand and used as a handheld instrument. This unit handles a wide force range by replacing force gauges. (Model: ZTA series) 3 4 1 2.Test Stand (*1) Drive unit part of measurement. It moves a force gauge by button operation to perform compression/tension measurement. A linear scale is installed, which allows displacement measurement by connecting with force gauge. (Model: Refer to P6 [Specifications/Individual System Details] for the details) 3. Cable (*2) Connects the force gauge and the test stand for control. (Model: CB-718) 2 4. Software (*3) Connect the force gauge and a PC by USB cable (included), drawing force-displacement graphs. Only for use on PC. (Model: Force Recorder Professional) Included Attachments (*4) Standard attachments are included for basic compression and pull tests. (Examples of included attachments) *1 FSA-MSL is not motorized due to manual type. *2 FSA-MSL does not include the cable due to manual type. *3 Monitor (PC) is not included. *4 The included attachments are different depending on the range of force gauge. Refer to the specification sheet of standard attachment for the details. 3 / 7 2021/12/24 IMADA CO., LTD. Force-displacement measuring system FSA series [FSA Series Models] Vertical Type (Standard) FSA-0.5K2-__N Models FSA-1K2-__N FSA-2.5K2-__N FSA-5K2-__N - Standard model with high-cost performance - Lineup in capacity from 500 to 5000N - Digital setting of speed, repetition number and compression (tension) time, etc. Vertical Type (Precise/Multiple functions) Models FSA-0.5KE-__N FSA-1KE-__N - Advanced model suitable for precise measurement with high rigidity - Lineup in capacity from 500N and 1000N - Available for wide range of speed setting - Equipped with many functions to enhance convenience such as digital setting of compression (tension) distance, contact detection, and more FSA-0.5K2-__N FSA-2.5K2-__N FSA-5K2-__N Horizontal Type Models FSA-0.5HK2-__N FSA-2.5HK2-__N - Horizontal model with high-cost performance - Lineup with Max. force value of 500 to 5000N - Digital setting of speed, repetition number and compression (tension) time, etc. FSA-0.5KE-__N FSA-1KE-__N Portable Model FSA-MSL-__N - Small manual model with knob adjustment - Max. force 50N - Suitable for measurement at narrow spaces FSA-0.5HK2-__N FSA-2.5HK2-__N FSA-MSL-__N [Selecting Model] FSA-0.5K2-__N-__ Add the required optional code from P6 [Specifications/Individual System Details]. E.g. -L, -CN, -V45 Select the force range from P6 [Specifications/Individual System Details]. E.g. 5N, 200N and 5000N Select from above [FSA Series Models] E.g. FSA-1KE and FSA-MSL 4 / 7 2021/12/24 IMADA CO., LTD. Force-displacement measuring system FSA series [Specifications (General)] FSA series Measurement Force N, kgf, lbf Unit Displacement* mm, inch Resolution Force Displacement 4 digits (e.g. Resolution of 5N force gauge is 0.001N) 0.001mm (on software Force Recorder Professional) 0.01mm (on force gauge display) Accuracy Force Displacement +/- 0.2%F.S. +/-1 digit +/- 0.1mm +/- 1digit( with no load)(*1) Sampling cycle 2000 data/sec Display update cycle 16 data/sec Customized display (header and footer), Peak hold (tension and compression), Internal 1000 points data memory, Comparator (judgment of OK or NG), Various function of force gauge Reversible display, Sign inversion, Zero clear timer, +NG alarm, Off timer (auto power off), Dumping, Time display, 1st/2nd peak, Displacement detection at force peak value, Displacement zero reset at selected force, setting lock Output function USB,Serial(RS232C),Analog(Approx. +/- 2V), Comparator, Over load,Sub comparator, USB flash drive (*2) Motorized Stand Function Stroke limit, Overload Prevention, Force control*3Emergency Stop Motorized Test Stand Power AC100V-240V Free input (*3) Operating Environment Temperature:0 - 40°C Humidity:20 -80%RH Instruction Manual, Inspection Certificate, Warranty Certificate, Accessories Power cable, Spare hues, USB cable, Driver CD-ROM(including software for data log "Force Logger"), Graphing software "Force Recorder Professional." *1 When maximum force is applied, the stand may be deformed vertically as below. FSA-0.5 to 5K2: less than 0.5mm, FSA-0.5/1KE: less than 0.25mm, FSA-0.5/2.5HK2 : less than 0.5mm *2 USB flash drive is not included. *3 The value of Force control is specified with the absolute value. *4 Power supply units are required individually for Motorized Test Stand and the Force gauge. [Software specifications (General)] Operating environment OS: Windows 7/8/8.1/10 CPU: Pentium4 (1GH more) or more is recommended Hardware Memory: 2GB more recommended Hard Disk: 10GB (data storage area) or more Platform NET Framework or more Execution environment Microsoft Internet Explorer 6.0 or later Windows Installer 3.1 or later Connecting Port USB1.1 and USB2.0 * connector * We do not guarantee the operation with USB 3.0. 5 / 7 2021/12/24 IMADA CO., LTD. Force-displacement measuring system FSA series FSA Series Spec/Model FSA-0.5K2 FSA-1K2 FSA-2.5K2 FSA-5K2 FSA-0.5KE FSA-1KE Force Range 1000N 1000N 2500N 2N,5N,20N,50N 100N,200N,500N 1000N 2500N 5000N 1000N Test Stand Capacity 500N 1000N 2500N 5000N 500N 1000N FSA0.5HK2 500N FSA2.5HK2 FSA-MSL 1000N 2500N 2500N 50N Stroke (*1) 230mm 290mm 290mm 295mm 265mm 290mm 230mm 265mm 80mm Max. sample height (*2) Speed 235mm 300mm 320mm 10 to 300 mm/min 380mm 0.5 to 300 mm/min 295mm 320mm 0.5 to 600 mm/min 245mm 340mm 10 to 300 mm/min 44mm Stroke limit setting Manual Digital/Manual Manual 3 types measuring modes (JOG/Manual/Cycle), Counter/Timer, Functions of test stand (*3) Force Control, Overload Prevention, Emergency Stop Contact Detection Break Detection Copy Menu Lock Easy Setup Included MX2-500N test stand -FA MX21000N -FA MX22500N -FA MX25000N -FA EMX-500N EMX1000N MH2-500N -FA MH22500N -FA MSL-50N Option of extended stroke (*4) -L (+200mm) -2L (+400mm) -L -L -EXT -L -L (+300mm) (+300mm) (+200mm) (+300mm) (+300mm) (*5) -V45 -V75 -V75 -V45 -V75 (1.5 to 45) (2.5 to 75) (2.5 to 75) (1.5 to 45) (2.5 to 75) -V90 -V150 -V150 -V90 -V150 Option of different speed (3 to 90) -V450 (15 to 450) -V600 (5 to 150) -V750 (25 to 750) -V1000 (5 to 150) (3 to 90) -V450 (15 to 450) -V600 (5 to 150) (20 to 600) (35 to (20 to 600) -V900 1000) -V900 (30 to 900) (30 to 900) Option of output (*6) -CN Equipped -CN *1 Stroke means movable capacity. Stroke range varies depending on the force gauge and the attachments combined. Long Stroke option is available. Refer to [option of extended stroke] of the above table for details. *2 [Max. sample height] means the distance between table and the tip of the measuring shaft of the force gauge (1000N or less) when the head is at the top without any attachments. The values of FSA-2.5K2/FSA-5K2 are when over 2500N models of ZTA series are attached. The value of FSA-0.5HK2 is the distance between the tip of the fixed axle of the table and the tip of the measuring shaft of force gauge (1000N or less). The value of FSA-2.5HK2 is when high capacity model of force gauge (2500N or more) is attached. *3 Refer to the individual specification for the details of the motorized test stands. *4 When change the speed and stroke, the capacity may decrease. Contact us for the details. *5 For FSA-5K2, it raises and extends the post of the stand. The Max. Sample height is extended but the stroke does not change. Not suitable for measurement of small sample. *6 [Option of output] means the function allows to interface with external devices such as interlocking shield. 6 / 7 2021/12/24 IMADA CO., LTD. Force-displacement measuring system FSA series Related Products (attachments) Compression Test Accessory UR series Pantograph Grip PGC series Film Grip FC series Hemispherical Easy griping for Suitable for gripping polyurethane Jig deformable samples thin film forms 90-degree peel test Fixture P90-200N Recommended for adhesive tape, tests * Multiple choices of accessories and jigs are available for various measurement needs. Custom-made jigs can be made to order based on your measurement requirements. * Refer to the specification of each attachment for more detail. [Cautions] - Information in this document is subject to change without prior notice. - This document is product descriptions and handling precautions, and do not guarantee various characteristics or safety. - This product is designed for force measurement purpose only. - Do not copy and use this content without authorization. - Some sample cannot be measured depending on their materials or shapes. - Please do not add load over capacity of a force gauge to prevent sensor break-down. - Displacement reading error can occur due to deflection of a sensor or test stand when load is added. - Optional attachment and PC are Not included in this unit - Software could not work in some operating environment . IMADA CO., LTD. 99 Jinnoshinden-cho aza Kanowari Toyohashi Aichi 441-8077, JAPAN Tel: +81-(0)532-33-3288 Fax: +81-(0)532-33-3866 E-mail: info@forcegauge.net Website: http://www.forcegauge.net/en/ Visit our website for more information on a wide range of product specifications, measurement applications and videos. 7 / 7 2021/12/24