Introduction to the Lennox ML196UHEK Gas Furnace
This document provides essential installation instructions for the Lennox ML196UHEK Merit Series Gas Furnace. Designed for both upflow and horizontal air discharge applications, this guide ensures proper setup and safe operation of your HVAC system.
The ML196UHEK furnace is a reliable heating solution for residential and commercial spaces. It is crucial to follow these guidelines meticulously to guarantee optimal performance and longevity of the unit.
Key aspects covered include detailed installation procedures, safety warnings, required clearances, combustion and ventilation air requirements, and specific instructions for various installation configurations. Adherence to these instructions is vital for preventing potential hazards such as property damage, personal injury, or loss of life.
For detailed technical specifications and model-specific information, please refer to the comprehensive content outlined within this manual.
Important Safety Information
WARNING: Improper installation, adjustment, alteration, service, or maintenance can cause property damage, personal injury, or loss of life. Installation and service must be performed by a licensed professional HVAC installer, service agency, or the gas supplier.
CAUTION: Contact with sharp sheet metal edges can result in personal injury. Handle the equipment with care and wear protective clothing.
DANGER: Ensure adequate combustion air to prevent potential hazards like carbon monoxide poisoning.
Installation Overview
The ML196UHEK furnace is designed for flexibility, allowing installation in upflow or horizontal positions. This manual details the necessary steps for:
- Proper unit placement and leveling.
- Connecting gas supply, electrical, and venting systems.
- Ensuring adequate combustion and ventilation air.
- Meeting all required installation clearances.
- Handling specific configurations like direct vent and non-direct vent installations.
Consult local building codes and regulations to ensure compliance with all applicable standards.
Key Features and Considerations
- The furnace is CSA International certified to ANSI Z21.47 and CSA 2.3 standards.
- It is equipped for natural gas applications, with a conversion kit available for propane/LP gas.
- Specific guidelines are provided for installations in confined and unconfined spaces.
- The manual includes diagrams illustrating various installation scenarios and clearances.
AHRI
