Briksmax BX705 Diagon Alley Wizarding Shops 76444 Lighting Kit Instructions

Product Overview

This manual guides users through the installation of the Briksmax BX705 lighting kit, designed to enhance the LEGO Diagon Alley Wizarding Shops 76444 set. The kit includes various LED components to illuminate the model.

Before You Begin

Ensure you have the LEGO Diagon Alley Wizarding Shops 76444 set assembled before starting the lighting kit installation. It is recommended to have a clean, well-lit workspace.

Component List

The following components are included in the Briksmax BX705 lighting kit:

• LED lights (various colors and sizes)
• Expansion boards
• Connecting cables
• Battery box (or USB power cable, depending on the version)
• Adhesive squares/strips
• User manual

Note: Batteries are not included.

Installation Guide

Follow these steps carefully to install the lighting kit. Refer to the diagrams in the original PDF for precise placement of components.

Step 1: Prepare the LEGO Set

Disassemble specific sections of the LEGO set as indicated in the original instructions to access areas where cables need to be routed.

Step 2: Install LED Lights

Carefully insert the small LED lights into designated connection points within the LEGO bricks. Use tweezers for precision if necessary. Ensure the LED's polarity is correct.

Step 3: Route Cables

Connect the LEDs to the expansion boards using the provided cables. Route the cables discreetly through the gaps and openings in the LEGO structure. Use adhesive squares to secure cables where needed, ensuring they do not obstruct the assembly of the LEGO set.

Step 4: Connect Expansion Boards

Connect the expansion boards to each other and to the main power source (battery box or USB cable) according to the wiring diagram. Ensure all connections are secure.

Step 5: Power Up and Test

Insert batteries into the battery box or connect the USB cable to a power source. Test the lights to ensure all LEDs are functioning correctly. If any lights do not work, check the connections and polarity.

Step 6: Final Assembly

Reassemble any parts of the LEGO set that were temporarily removed. Ensure all cables are neatly tucked away and do not interfere with the final appearance or stability of the model.

Troubleshooting

If lights do not work:

• Check battery orientation and power source.
• Verify all cable connections are firm and correctly seated.
• Ensure LEDs are installed with the correct polarity.
• Confirm expansion boards are connected in the correct sequence.

Care and Maintenance

Keep the lighting kit dry and away from extreme temperatures. Clean with a dry cloth if necessary.