SmartPods True Wireless Headset

Specifications

Product Instructions

1. Operation Steps

Bilateral Use: Open the top cover of the charging box and press the multi-function key of the charging box to turn on.

Take out the headphones. The headphones will automatically turn on. The headphone indicator lights will flash alternately red and blue in the main ear, and blue in the secondary ear once every 5 seconds.

Headphone Pairing with Mobile Phone: The red and blue alternating flashing in the headphone's main ear indicates that it needs to be paired with Bluetooth. Open your mobile phone's settings, navigate to Bluetooth, search for the Bluetooth name "AP01", and click to connect.

2. Steps for Switching On and Off

Earphone: Long press the multi-function key for 3 seconds to turn on (blue light flash). Long press the multi-function key for 4 seconds to turn off (red light). The earphones will automatically turn off when placed into the charging bin. They will also turn off automatically after 3 minutes if disconnected from a device.

Charging Bin: Press the multi-function key to turn on (green light is always on). Press the multi-function key again to turn off (green light is off).

3. Charging Indication

When the charging bin is being charged, the red light is always on. The indicator lights go out when the bin is full.

When the charging bin charges the headphones, the green light in the charging bin is always on, and the red light in the headphones is always on.

After the headphones are fully charged, the charging bin and headphone indicator lights will turn off.

Product Schematic Diagram

The product consists of two wireless earbuds and a charging case.

Earbud Details:

• Touch Area: Located on the top surface for controls like play/pause, next/previous song, answer/hang up calls, and activating Siri.
• Microphone (Mic): An opening for voice input.
• Charging Contacts: Located at the bottom to connect with the charging case.

Charging Case Details:

• The case houses and charges the earbuds.
• It features a charging port at the bottom, typically USB-C, for recharging the case itself.
• The Link Tech logo is visible on the exterior of the case.

Visual representation of earbud and charging case components.

Product Operation Instructions

Earphone Matching

To manually match the earphones if they become unpaired:

1. Hold the multi-function key on both earbuds simultaneously for 3 seconds until the red and blue lights flicker alternately. Release the keys.
2. Double-click the multi-function key on either earbud. The machine should match successfully.
3. Indicator: After successful matching, double-clicking the multi-function key on one side will show red and blue lights alternately, while the other side will show a blue light once for 5 seconds.

Precautions

1. The earphones should be stored in a dry and ventilated environment to avoid oil, water, moisture, and dust affecting product performance.
2. Avoid using stimulus, organic solvents, or items containing these ingredients to clean the earphones.
3. Use the earphones correctly as per the specifications. Pay attention to environmental influences on the earphones. For a smooth connection, it is recommended that the distance between the earphones and the phone is within 10 meters.
4. If the earphones fail to connect or have a poor connection, please do not attempt to repair the earphones or accessories yourself, as this will void the warranty.
5. When charging the earphones, please use the standard USB cable or a specified charging cable provided by Link Tech.
6. To ensure normal use, please ensure the earphones have sufficient power.