Introduction
This user manual provides essential information for assembling and operating the GOTRAX KS3PRO Kids Scooter. It is crucial to read all information in this manual before riding.
Note to all riders under 12 years of age: It is very important to obtain parental permission before riding this scooter.
⚠️ Don't Ride Until You Read This:
- Always wear an ASTM F963 approved helmet and protective gear. ⛑️
- Always be aware of local road laws and follow them. ?
- Do not ride the scooter under the influence of drugs or alcohol. ?
- Always respect pedestrians. ?
- Do not ride under wet conditions. The scooter may slide, causing injury. Wet conditions can damage the scooter and void the warranty. ?️
⚠️ Warning Message
- Abuse: Physical damage due to negligent care and extreme riding is not covered.
- Risk: Whenever the KS3PRO scooter is ridden, there is a risk of severe injury or even death from loss of control, collisions, and falls. Use caution and ride at your own risk.
- Modification: Do not modify the product from the manufacturer's original design.
- Load Rating: Never exceed the 110 lb (50 kg) maximum load rating.
- Before riding: Users are advised to check the limits of use according to road safety regulations.
- Safety Gear: Wear a helmet, knee pads, elbow guards, and wrist guards for optimum safety.
- Footwear: Do not use this scooter without shoes.
- Pedestrians: Respect pedestrians in all circumstances.
- Riding Environment: Always ride on smooth surfaces and away from motorized vehicles. Do not ride at night in an unlit area.
- Tiller: Do not rotate the tiller on the scooter, as this will damage the scooter.
- Environment: Never ride in water, sand, gravel, dirt, or other debris to avoid injury or damage to the scooter and its components.
- Surface Awareness: Be aware that the scooter's behavior can change if it comes into contact with a different surface.
- Speed: Avoid high speeds in descents, as this can be dangerous.
- Pre-ride Check: Before each use, check the adjustment of the steering system and the status of the different components.
- Brake: Brake by pressing the brake with the rear foot. When braking heavily, the brake may heat up; do not touch it until it has cooled down.
- Pinching: Do not place fingers at the mechanical joints to avoid pinching.
- Assembly: An adult must assist a child in assembling the scooter.
- Parts: Replace broken or damaged parts directly to ensure proper scooter function and safety. Check that the steering system is correctly adjusted and that all connection elements are tight and not broken.
- Age Limit: Children under 3 years old must not use this scooter. Adult supervision is recommended for the use of this scooter by a young child.
? Unpack
The GOTRAX KS3PRO Kids Scooter package includes the following components:
- Scooter Body: 1 unit (main frame with deck, seat, and rear wheel)
- Handlebar: 1 unit
- Front Wheels: 2 units
- Wrenches: 3 units
- Screws: 2 units
- User Manual: 1 unit
? Get To Know Your Scooter
The main scooter body is largely pre-assembled. Familiarize yourself with the key parts:
- Handlebar: For steering and holding.
- Height Adjustment: Mechanism to change handlebar height.
- Seat: Adjustable seating option.
- Brake: Rear foot brake for slowing down and stopping.
- Deck: The platform where the rider stands.
- Folding Knot: Mechanism for folding and unfolding the scooter.
- Front Wheels: Two wheels at the front for stability.
- Rear Wheel: Single wheel at the back.
? Assembling the Scooter
- Stem Assembly: Pull the folding knot towards the handlebar and lift the stem upward until it locks into place.
- Seat Positioning: Open the seat buckle, turn the seat to be parallel with the deck, and then lock the buckle. Ensure a moving gap is left for the folding knot.
- Seat Unfolding: Press the button located under the seat to unfold the seat cushion downward.
- Handlebar Stem Insertion: Open the stem buckle, then pull out the stem from the inside.
- Handlebar Attachment: Assemble the handlebar onto the stem and tighten the screw securely with a wrench.
- Front Wheel Installation: Insert the nut and one front wheel into the frame. Tighten the screw with a wrench.
- Second Front Wheel: Repeat step 6 to assemble the other front wheel.
? Unfolding the Scooter
- Pull the folding knot towards the handlebar.
- Raise the handlebar to its upright position.
- Unfold the seat to fix it securely to the stem.
Note: Before sitting down, ensure that the seat is fixed securely to the stem.
? Adjusting the Seat
- Open the seat buckle.
- Rotate the seat to the top of the deck.
- Move the seat up and down to adjust the desired height.
- Lock the seat buckle.
- To unfold the seat: Press the button under the seat and unfold the seat downward.
- To fold the seat: Push the seat up.
Note: When adjusting the seat, avoid touching the metal peg on the stem.
? Remove the Seat
- Open the seat buckle.
- Further open the seat buckle to disengage the hook from the metal peg.
- Remove the seat from the scooter.
? Adjusting the Height
- Open the stem buckle.
- Press the metal peg to adjust the handlebar height up or down.
- Once the metal peg is fixed in the desired slot, lock the stem buckle.
Note for safe use: (1) The metal peg must be inserted into one of the slots, (2) the stem buckle must be locked before use, and (3) the seat must be fixed on the stem before sitting down.
? Steering & Braking
Steering
To steer the scooter, riders need to change their center of gravity. The scooter will turn right when the rider leans their body to the right, and it will turn left when the rider leans their body to the left.
Braking
To slow down or stop the scooter immediately, place one foot on the rear fender.
? Folding the Scooter
- Fold the seat. Refer to the "Adjusting the Seat" section for folding instructions.
- Pull the folding knot towards the handlebar.
- Move the handlebar down towards the deck until it locks into the folded position.
Before You Begin
Recommended Riding Practices
Parental supervision is required. The scooter should only be used in a controlled environment free of potential traffic hazards, not on public streets. Avoid areas with motor vehicles. Keep both hands on the handlebars at all times. Only one child should ride the scooter at a time. Never use near steps, slopes, driveways, hills, roadways, alleys, or swimming pool areas.
Do not ride the scooter in wet weather. Scooters are designed for use on flat, clean, dry, and smooth paved areas, free from loose debris like rocks, sticks, or gravel. Wet, slick, uneven, or rough surfaces can impair traction and contribute to accidents. Avoid riding in mud, ice, puddles, or water. Avoid excessive speeds, especially downhill. Do not ride at night or when visibility is impaired.
Safety Equipment
Always ensure the child wears proper protective equipment, including a certified safety helmet. A helmet may be legally required by local law; users should check with local law enforcement. Riders should always wear fully enclosed shoes with flat soles.
Failure to use common sense and heed the above warnings further increases the risk of serious injury. Use at your own risk and with appropriate and serious attention to safe operation. Use caution.
Warning: Always inspect scooter prior to riding. Proper inspection and maintenance of the scooter can reduce the risk of injury. Always inspect the scooter before riding and regularly maintain it.
? Maintenance & Repair
Regular cleaning and maintenance will extend the life of the scooter.
Maintenance
Even though the GOTRAX KS3PRO is a durable scooter, it requires maintenance to ensure continued performance and riding pleasure.
Cleaning Your Scooter
To keep the scooter in good shape, clean it as often as possible. Never use alcohol or strong cleaning agents, as they may damage delicate materials. Warm water and a damp cloth are sufficient. Avoid applying water directly to the grip tape and never submerge the scooter in water.
Storage
When not in use, store the scooter in a dry and cool location. Avoid storing it outdoors, as sun exposure can damage its appearance and reduce its lifespan.
? Warranty
For problems or detailed information, contact the customer service team:
- US Team After-Sales Email: support@gotrax.com
- CA Team After-Sales Email: canada@gotrax.com
