Creative D200 Bluetooth Speaker

1. Product Overview

The Creative D200 is a Bluetooth-compatible stereo speaker.

• 1. CONNECT Button
• 2. Volume Down / Up
• 3. Power ON/OFF
• 4. AUX IN
• 5. DC IN

2. Enjoy audio from Bluetooth devices

1. Power on the speaker. The LED status indicator will show green, indicating no device is connected.
2. Press and hold the CONNECT button for 3 seconds while the speaker is ON. The LED will blink rapidly, indicating pairing mode.
3. On your device, turn on the Bluetooth feature and search for "Creative D200".
4. Pair and connect to the Creative D200. If prompted for a passcode, enter "0000".
5. Pairing is successful, and the speaker is ready to stream music. The blue LED will stay lit.

Note: These are generic steps. Consult your device's manual for specific instructions.

3. Switching between paired devices

To switch between your current connected device and a previously connected device:

• Action: Press the "CONNECT" button for 1 second.
• Indicators: D200 LED blinks and stays lit in blue.
• Status: Ready to stream music.

Note: Ensure the next paired device's Bluetooth feature is ON and ready to accept connections. You can also reconnect by initiating a connection from your Bluetooth device when the speaker is not connected to any device.

4. Reset to factory setting

To return to factory settings and clear paired device memory:

1. Ensure the speaker is OFF.
2. Press and hold the Power Button for 8 seconds until the D200 LED blinks rapidly.
3. The D200 LED will blink blue, indicating pairing mode and readiness to accept connections from other devices.

5. Playback with other audio devices via AUX IN

Connect other audio devices using the AUX IN port. (Optional, sold separately)

6. FAQ (Frequently Asked Questions)

• No Bluetooth link: Delete "Creative D200" from your device's paired memory and re-pair. Ensure devices are within 1 meter of each other and not connected to other devices.
• Bluetooth connected, but no music: Manually set Creative D200 as the audio output on your computer or device. Consult your manufacturer's documentation.

For more information, visit support.creative.com.

Safety Instructions

• Disconnect the mains plug when the device is unused for several days or for complete disconnection from power.
• Bluetooth signals may interfere with other electronic and medical devices.
• Switch off the device where prohibited (e.g., medical facilities, aircraft).
• Keep the device at least 20 cm from pacemakers and other medical devices.

Technical Specifications

• Bluetooth Version: Bluetooth 2.1 + EDR
• Frequency: 2.4 GHz
• Supported Bluetooth profiles: A2DP, AVRCP
• Operating Range: Up to 10 meters (open space)

Note: Specifications apply to Creative D200 operating with the supplied 14V DC 1.9A power adapter. Compatibility with PCs and mobile devices is subject to their Bluetooth capabilities and supported profiles.

Regulatory Information

This product complies with FCC Part 15 rules for Class B digital devices. It also complies with Canadian ICES-003. Modifications not expressly approved may void the user's authority to operate the device. The device should be installed and operated with a minimum distance of 20cm between the radiator and your body.

California Proposition 65: Handling this product may expose you to chemicals known to the State of California to cause cancer, birth defects, or other reproductive harm. Wash hands after handling.