Owner’s Manual AVH-X490BS AVH-X390BS DVD RDS AV RECEIVER English < QRD3482-A > Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card. English
Pioneer Avh X391bhs Manual
AVH-X490BS AVH-X390BS
DVD RDS AV RECEIVER
Important (Serial number) The serial number is located on the bottom of this unit. For your own security and convenience, be sure to record this number on the enclosed warranty card.
Owner's Manual
English
Contents
Thank you for buying this Pioneer product. Please read through these instructions so you will know how to operate your model properly. After you have finished reading the instruc-
Displaying the "Bluetooth" screen....................12 Registering your Bluetooth devices.................12 Connecting a registered Bluetooth device
manually....................................................12 Switching visibility...........................................13
Compressed files..............21
Starting procedure (for Disc)...........................23 Starting procedure (for USB)...........................23 Operations common to all file types................23
Using category scan.......................................34 Using TuneMixTM..............................................34 About SmartFavorites.....................................34 Using iTunes Tagging......................................34 Activating the Traffic & Weather Now...............34
tions, keep this document in a safe place for
Entering the PIN code for Bluetooth wireless
Audio file operations.......................................23 Displaying the "SiriusXM settings" screen.......34
future reference.
connection.................................................13 Still image file operations................................24 Using SportsFlashTM list...................................34
Important The screens shown in the examples may
Displaying the device information....................13 Clearing the Bluetooth memory......................13 Updating Bluetooth software...........................13 Displaying the Bluetooth software version.......13 Switching the connected Bluetooth device......13
iPod...................................24
Connecting your iPod......................................25 Starting procedure..........................................25 Selecting song or video sources from the
Using Featured Favorites Band.......................35 Restoring the "SiriusXM Settings" to the
default........................................................35
AUX source.......................36
differ from actual screens, which may be changed without notice for performance and
Hands-free phoning..........14
playlist screen............................................25 Using this product's iPod function from your
Starting procedure..........................................36 Setting the video signal...................................36
function improvements.
Displaying the Phone menu screen.................14
iPod............................................................26
Making a phone call........................................14 Selecting a song from the list related to the
AV input.............................36
Precaution...........................4
Information to User...........................................4 Important safety information.............................5 Parking brake interlock......................................5 When using a display connected to V OUT.......5 To avoid battery exhaustion...............................5 Rear view camera.............................................5 Handling the USB connector.............................6 Failure to operate..............................................6
Receiving a phone call....................................15 Minimizing the dial confirmation screen..........15 Changing the phone settings..........................15 Using the voice recognition function (for
iPhone)......................................................15 Setting phone book auto synchronization.......15 Notes for hands-free phoning..........................15
Setup for iPod / iPhone or
smartphone.......................16
song currently playing (link search)............26
AppRadioOne...................26
Using AppRadioOne.......................................26 Using the audio mix function...........................27
Pandora®...........................27
Pandora operations.........................................28 Starting procedure..........................................28 Selecting a Pandora station from the list.........28
Starting procedure..........................................36 Setting the video signal...................................36
MIXTRAX...........................37
MIXTRAX operation........................................37 MIXTRAX EZ operation..................................37 Displaying the "MIXTRAX Settings" screen.....37 Setting the flash pattern..................................38
System settings................38
Visit our website................................................6 The basic flow of iPod / iPhone or smartphone Adding a station..............................................28 Displaying the "System" setting screen...........38
Protecting the LCD panel and screen...............6
setup..........................................................16 Storing the preset stations..............................29 Setting Bluetooth audio source activation.......38
Notes on internal memory.................................6 About this manual.............................................6 Use and care of the remote control...................6
Basic operation...................7
Setting the device connection method............16 iPod compatibility............................................16 AndroidTM device compatibility.........................16 Information on the connections and functions
for each device...........................................17
Spotify®..............................29
Using Spotify with your Pioneer car audio/ video..........................................................30
Starting procedure..........................................30
Setting Spotify source activation.....................38 Setting the ever scroll......................................38 Setting the beep tone......................................38 Setting the auto audio mix function.................38 Setting AppRadioOne Sound..........................38
Checking part names and functions..................7 Remote control.................................................7 Notes on using the LCD panel..........................8
Radio.................................18
Starting procedure..........................................18
Selecting a track or station from the list...........31
Bluetooth audio player.....31
Setting the rear view camera...........................38 Setting the demo mode...................................39 Selecting the system language.......................39
Adjusting the LCD panel angle..........................8 Inserting/ejecting/connecting media.................8 On first-time startup..........................................8 How to use the screens...................................10 Supported AV source......................................11 Displaying the AV operation screen.................11
Storing the strongest broadcast frequencies................................................18
Tuning into strong frequencies........................18
Disc....................................19
Starting procedure..........................................20
Starting procedure..........................................31 Selecting files from the file name list...............32
SiriusXM® Satellite
Radio.................................32
Setting the keyboard language with the application for iPhone................................39
Adjusting the response positions of the touch panel (touch panel calibration)...................39
Setting the dimmer..........................................40 Adjusting the picture.......................................40
Selecting a source..........................................11 Selecting files from the file name list...............20 SiriusXM tuner operations...............................33 Displaying the firmware version......................40
Changing the display order of sources............11 Switching the media file type...........................20 Starting procedure..........................................33 Displaying the open source licenses...............40
Using the touch panel.....................................11 Searching for the part you want to play...........20 Selecting a channel from a list of all
Updating firmware...........................................41
Registration and
Operating the DVD menu................................20
channels....................................................33
Switching the subtitle/audio language.............20 Selecting a channel from the category list.......33
Audio adjustments...........41
2
connection of Bluetooth® device................................12
Operating the DVD menu using touch panel keys...........................................................20
Switching the displayed list.............................33 Setting TuneStartTM..........................................33 Using TuneScanTM............................................33
Displaying the "Audio" setting screen..............41 Using fader/balance adjustment......................41 Switching sound muting/attenuation...............41
Contents
Adjusting source levels...................................41 Restoring this product to the default
Notice regarding DVD-Video viewing..............64
Using the auto level control.............................41
settings......................................................49 Notice regarding MP3 file usage.....................64
Adjusting loudness..........................................41
Setting the subwoofer output..........................42
Using the LCD screen correctly.......................65
Connection........................50 Specifications.................................................65
Adjusting the cutoff frequency value...............42 Switching the rear speaker output...................42 Using BASS Boost..........................................42 Selecting the listening position........................42 Adjusting the speaker output levels finely........42 Adjusting the time alignment...........................42 Switching the time alignment preset................43 Using the equalizer.........................................43 Adjusting the equalizer curve automatically
(Auto EQ)...................................................43 Saving the sound settings...............................44 Loading the sound settings.............................44
Precautions.....................................................50 Precautions before connecting the system......50 Before installing this product...........................50 To prevent damage.........................................50 Notice for the blue/white lead..........................51 This product....................................................51 Power cord......................................................51 Speaker leads.................................................51 Power amp (sold separately)...........................52 iPhone and smartphone..................................52 iPhone with Lightning connector.....................52 iPhone with 30-pin connector..........................53
Theme menu.....................45
Android device................................................53 Camera...........................................................53
Selecting the background display....................45 External video component and the display......54
Setting the illumination color...........................45
Selecting the theme color................................45
Installation........................54
Selecting the clock image...............................45 Precautions before installation........................54
Setting up the video
Before installing..............................................54 Installation notes.............................................54
player.................................46 Installation using the screw holes on the side of
Setting the top-priority languages...................46 Setting the angle icon display..........................46 Setting the aspect ratio...................................46 Setting parental lock.......................................46 Displaying your DivX VOD registration
this product................................................55 Installing the microphone................................55 Mounting on the sun visor...............................55 Installation on the steering column..................55 Adjusting the microphone angle......................56
code...........................................................47
Displaying your DivX VOD deregistration
Appendix...........................56
code...........................................................47 Troubleshooting..............................................56
Automatic playback of DVDs...........................47 Error messages..............................................57
Setting the video signal for the rear view
Handling and care of discs..............................59
camera.......................................................47 Playable discs.................................................60
Detailed information for playable media..........60
Favorite menu...................48 Bluetooth........................................................63
Creating a shortcut.........................................48 Selecting a shortcut........................................48 Removing a shortcut.......................................48
Common operations.........48
Setting the time and date................................48 Storing song information to an iPod (iTunes
Tagging).....................................................48 Setting the "Sound Retriever" function.............49 Changing the wide screen mode.....................49
SiriusXM® satellite radio..................................63 WMA...............................................................63 FLAC...............................................................63 DivX................................................................63 AAC................................................................63 AndroidTM.........................................................63 Detailed information regarding connected iPod
devices.......................................................63 Using app-based connected content...............64 Pandora®.........................................................64 Spotify®...........................................................64
Other functions.................49 Notice regarding video viewing.......................64
3
Precaution
Information to User
MODEL NO. : AVH-X490BS, AVH-X390BS Contains FCC ID : AJDK071
This device complies with Part 15 of FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of this device.
The Bluetooth antenna cannot be removed (or replaced) by user.
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment and meets the FCC radio frequency (RF) Exposure Guidelines. This equipment has very low levels of RF energy that are deemed to comply without testing of specific absorption ratio (SAR).
4
This transmitter must not be co-located or operated in conjunction with any other antenna or transmitter.
Alteration or modifications carried out without appropriate authorization may invalidate the user's right to operate the equipment.
NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: Reorient or relocate the receiving antenna. Increase the separation between the equipment and receiver. Connect the equipment into an outlet on a circuit different from that to which the receiver is connected. Consult the dealer or an experienced radio/TV technician for help.
CAUTION: USE OF CONTROL OR ADJUSTMENT OR PERFORMANCE OF PROCEDURES OTHER THAN THOSE SPECIFIED HEREIN MAY RESULT IN HAZARDOUS RADIATION EXPOSURE. CAUTION: THE USE OF OPTICAL INSTRUMENTS WITH THIS PRODUCT WILL INCREASE EYE HAZARD.
CAUTION This product is a Class 1 laser product classified under the Safety of laser products, IEC 60825-1:2007, and contains a class 1M laser module. To ensure continued safety, do not remove any covers or attempt to gain access to the inside of the product. Refer all servicing to qualified personnel.
CAUTION--CLASS 1M VISIBLE AND INVISIBLE LASER RADIATION WHEN OPEN, DO NOT VIEW DIRECTLY WITH OPTICAL INSTRUMENTS.
The Safety of Your Ears is in Your Hands
Get the most out of your equipment by playing it at a safe level-- a level that lets the sound come through clearly without annoying blaring or distortion and, most importantly, without affecting your sensitive hearing. Sound can be deceiving. Over time, your hearing "comfort level" adapts to higher volumes of sound, so what sounds "normal" can actually be loud and harmful to your hearing. Guard against this by setting your equipment at a safe level BEFORE your hearing adapts.
ESTABLISH A SAFE LEVEL:
Set your volume control at a low setting. Slowly increase the sound until you can hear it comfortably
and clearly, without distortion. Once you have established a comfortable sound level, set
the dial and leave it there.
BE SURE TO OBSERVE THE FOLLOWING GUIDELINES:
Do not turn up the volume so high that you can't hear what's around you.
Use caution or temporarily discontinue use in potentially hazardous situations.
Precaution
Do not use headphones while operating a motorized vehicle; the use of headphones may create a traffic hazard and is illegal in many areas.
Important safety information
WARNING Do not ingest the battery, Chemical Burn Hazard (The remote control supplied with) This product contains a coin/ button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just 2 hours and can lead to death. Keep new and used batteries away from children. If the battery compartment does not close securely, stop using the product and keep it away from children. If you think batteries might have been swallowed or placed inside any part of the body, seek immediate medical attention.
WARNING
Do not attempt to install or service this product by yourself. Installation or servicing of this product by persons without training and experience in electronic equipment and automotive accessories may be dangerous and could expose you to the risk of electric shock, injury or other hazards.
Do not allow this product to come into contact with liquids. Electrical shock could result. Also, damage to the product, smoke, and overheating could result from contact with liquids.
If liquid or foreign matter should get inside this product, park your vehicle in a safe place, turn the ignition switch off (ACC OFF) immediately and consult your dealer or the nearest authorized Pioneer Service Station. Do not use this product in this condition because doing so may result in a fire, electric shock, or other failure.
If you notice smoke, a strange noise or odor from this product, or any other abnormal signs on the LCD screen, turn off the power immediately and consult your dealer or the nearest authorized Pioneer Service Station. Using this product in this condition may result in permanent damage to the system.
Do not disassemble or modify this product, as there are high-voltage components inside which may cause an electric shock. Be sure to consult your dealer or the nearest authorized Pioneer Service Station for internal inspection, adjustments or repairs.
Before using this product, be sure to read and fully understand the following safety information:
Do not operate this product, any applications, or the rear view camera option (if purchased) if doing so will divert your attention in any way from the safe operation of your vehicle. Always observe safe driving rules and follow all existing traffic regulations. If you experience difficulty in operating this product or reading the display, park your vehicle in a safe location and apply the parking brake before making the necessary adjustments.
Never set the volume of this product so high that you cannot hear outside traffic and emergency vehicles.
To promote safety, certain functions are disabled unless the vehicle is stopped and/or the parking brake is applied.
Keep this manual handy as a reference for operating procedures and safety information.
Do not install this product where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems or safety features, including air bags or hazard lamp buttons or (iii) impair the driver's ability to safely operate the vehicle.
Please remember to fasten your seat belt at all times while operating your vehicle. If you are ever in an accident, your injuries can be considerably more severe if your seat belt is not properly buckled.
Never use headphones while driving.
CAUTION
This product is evaluated in moderate and tropical climate condition under the Audio, video and similar electronic apparatus - Safety requirements, IEC 60065.
Parking brake interlock
Certain functions (such as viewing of video image and certain touch panel key operations) offered by this product could be dangerous (possibly resulting in serious injury or death) and/ or unlawful if used while driving. To prevent such functions from being used while the vehicle is in motion, there is an interlock system that senses when the parking brake is set and when the vehicle is moving. If you attempt to use the functions described above while driving, they will become disabled until you stop the vehicle in a safe place, and (1) apply the parking brake, (2) release the parking brake, and then (3) apply the parking brake again. Please keep the brake pedal pushed down before releasing the parking brake.
To ensure safe driving
WARNING
LIGHT GREEN LEAD AT POWER CONNECTOR IS DESIGNED TO DETECT PARKED STATUS
AND MUST BE CONNECTED TO THE POWER SUPPLY SIDE OF THE PARKING BRAKE SWITCH. IMPROPER CONNECTION OR USE OF THIS LEAD MAY VIOLATE APPLICABLE LAW AND MAY RESULT IN SERIOUS INJURY OR DAMAGE. Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or death. To avoid the risk of damage and injury and the potential violation of applicable laws, this product is not for use with a video image that is visible to the driver. In some countries the viewing of video image on a display inside a vehicle even by persons other than the driver may be illegal. Where such regulations apply, they must be obeyed.
If you attempt to watch video image while driving, the warning "Viewing of front seat video source while driving is strictly prohibited." will appear on the screen. To watch video image on this display, stop the vehicle in a safe place and apply the parking brake. Please keep the brake pedal pushed down before releasing the parking brake.
When using a display connected to V OUT
The video output terminal (V OUT) is for connection of a display to enable passengers in the rear seats to watch video images.
WARNING NEVER install the rear display in a location that enables the driver to watch video images while driving.
To avoid battery exhaustion
Be sure to run the vehicle engine while using this product. Using this product without running the engine can drain the battery.
WARNING Do not install this product in a vehicle that does not have an ACC wire or circuitry available.
Rear view camera
With an optional rear view camera, you are able to use this
product as an aid to keep an eye on trailers, or backing into a
tight parking spot.
5
Precaution
WARNING SCREEN IMAGE MAY APPEAR REVERSED. USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE
REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE. CAUTION The rear view mode is to use this product as an aid to keep an eye on the trailers, or while backing up. Do not use this function for entertainment purposes.
Handling the USB connector
CAUTION To prevent data loss and damage to the storage device,
never remove it from this product while data is being transferred. Pioneer cannot guarantee compatibility with all USB mass storage devices and assumes no responsibility for any loss of data on media players, iPhone, smartphone, or other devices while using this product.
6
1 Register your product. 2 Receive updates on the latest products and technologies. 3 Download owner's manuals, order product catalogs,
research new products, and much more. 4 Receive notices of software upgrades and software updates.
Protecting the LCD panel and screen
Do not expose the LCD screen to direct sunlight when this product is not used. This may result in LCD screen malfunction due to the resulting high temperatures.
When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of spots, colored stripes, etc.
To protect the LCD screen from damage, be sure to touch the touch panel keys only with your finger and do so gently.
Notes on internal memory
Before removing the vehicle battery
Some of the settings and recorded contents will not be reset.
Data subject to erasure
The information is erased by disconnecting the yellow lead from the battery (or removing the battery itself). Some of the settings and recorded contents will not be reset.
Resetting the microprocessor
CAUTION Pressing the RESET button resets settings and recorded contents to the factory settings.
Do not perform this operation when a device is connected to this product.
Some of the settings and recorded contents will not be reset.
The microprocessor must be reset under the following conditions: Prior to using this product for the first time after installation. If this product fails to operate properly. If there appears to be problems with the operation of the
system. If your vehicle position is shown on the map with a signifi-
cant positioning error.
1 Turn the ignition switch OFF. 2 Press the RESET button with a pen tip or other
pointed implement. Refer to Checking part names and functions on page 7 Settings and recorded contents are reset to the factory settings.
About this manual
This manual uses diagrams of actual screens to describe operations. However, the screens on some units may not match those shown in this manual depending on the model used.
Meanings of Symbols Used in This Manual
X0000BT
This indicates model name that are supported the described operations.
This indicates to touch an appropriate soft key on the touch screen.
HOLD
This indicates to touch and hold an appropriate soft key on the touch screen.
This indicates that there is a reference or supplementary for the key or screen.
Use and care of the remote control
Installing the battery
Slide the tray on the back of the remote control out and insert the battery with the plus (+) and minus () poles aligned properly. When using for the first time, pull out the film protruding
from the tray.
Precaution
Basic operation
WARNING
Do not ingest the battery, Chemical Burn Hazard. This product, including the supplied remote control,
contains a coin/button cell battery. If the coin/button cell battery is swallowed, it can cause severe internal burns in just two hours and can lead to death. Keep new or used batteries out of the reach of children. If the battery is swallowed or placed inside any part of the body, consult a doctor immediately. If the battery compartment does not close securely, stop using the product and keep it away from children. Batteries (battery pack or batteries installed) must not be exposed to excessive heat such as sunshine, fire or the like.
CAUTION
Remove the battery if the remote control is not used for a month or longer.
There is a danger of explosion if the battery is incorrectly replaced. Replace only with the same or equivalent type.
Do not handle the battery with metallic tools. Do not store the battery with metallic objects. If the battery leaks, wipe the remote control completely
clean and install a new battery.
When disposing of used batteries, please comply with governmental regulations or environmental public institutions' rules that apply in your country/area.
Checking part names and functions
X490BS
1 2 3 4 5 6 78 9
Using the remote control
Point the remote control in the direction of the front panel to operate. The remote control may not function properly in direct
sunlight.
Important
Do not store the remote control in high temperatures or direct sunlight.
Do not let the remote control fall onto the floor, where it may become jammed under the brake or gas pedal.
X390BS
7 8
2 5 4 3 6
9
1
1 LCD screen
2 Volume (+/) button
3 DISP button
On the AV operation screen, press to turn the display off. On the Application screen or navigation mode, press to display the side control bar. Press and hold to turn the display off. p When the display is turned off, touch the
screen to revert to the original screen.
4
button Press to display the top menu screen.
Press and hold to activate the voice recogni-
tion function.
Refer to Using the voice recognition func-
tion (for iPhone) on page 15
5 MODE button
Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode.
6 TRK ( /) button
Press to return to the previous track (chapter) or go to the next track (chapter). Press and hold to perform fast reverse or fast forward. Press to answer or end a call.
7
button
8 RESET button
Refer to Resetting the microprocessor on page 6
9 Discloading slot
Refer to Inserting and ejecting a disc on page 8
Remote control
1 23
8
a
7
4 5
9
b
6
c
7
Basic operation
1 Volume (+/)
2 MODE
Press to switch between the Application screen and the AV operation screen. Press and hold to switch to the camera view mode.
3 SRC
Press to cycle through all the available sources. Press and hold to turn the source off.
4 TOP MENU
Returns to the top menu during DVD playback.
5 MENU Displays the DVD menu during DVD playback.
6 Thumb pad
Selects a menu on the DVD menu.
7 MUTE
8 AUDIO Changes the audio language, subtitle lanSUBTITLE guage or viewing angle during DVD playback. ANGLE
9 BAND/ ESC
Selects the tuner band when tuner is selected as a source. Cancels the control mode of functions. Switches between media file types when playing the data of Disc, USB.
10 RETURN Returns to the specified point and begins playback from there.
11
Pauses or resumes playback.
or For audio: Press and hold to perform fast reverse or fast forward. For video: Press to perform fast reverse or fast forward.
or Press to return to the previous track (chapter) or go to the next track (chapter). Press to answer or end a call.
Stops playback. If you resume playback, playback will start from the point where you stopped. Touch the key again to stop playback completely.
12 FOLDER/P. Selects the next or previous disc or folder.
CH
Recalls radio station frequencies assigned to
preset channel keys.
8
Notes on using the LCD panel
WARNING
Do not use with the LCD panel left open. It may result in injury in the event of an accident.
CAUTION
Keep hands and fingers clear of this product when opening, closing, or adjusting the LCD panel. Be especially cautious of children's hands and fingers.
Do not open or close the LCD panel by force. It may cause a malfunction.
Do not operate this product until the LCD panel has completely opened or closed. The LCD panel may stop at that angle for safety.
Do not place a glass or can on the open LCD panel.
Adjusting the LCD panel angle
X490BS
1 Press the button.
2 Touch or LCD panel.
to adjust the angle of the
3 Touch . Returns to the previous screen.
Inserting/ejecting/connecting media
CAUTION
Do not insert anything other than a disc into the disc-loading slot.
Ejecting a disc
X490BS 1 Press the button. 2 Touch to open the LCD panel. 3 Remove the disc, and press the button.
Inserting a disc
X390BS 1 Insert a disc into the disc-loading slot.
Ejecting a disc
X390BS 1 Press button to eject a disc.
Plugging and unplugging a USB storage device
p This product may not achieve optimum performance with some USB storage devices.
p Connection via a USB hub is not possible. p A USB cable is required for connection. 1 Pull out the plug from the USB port of the USB
cable. 2 Plug a USB storage device into the USB cable.
1
2
Inserting and ejecting a disc
Inserting a disc
X490BS 1 Press the button. 2 Touch to open the LCD panel. 3 Insert a disc into the disc-loading slot.
1 USB cable 2 USB storage device
Check that no data is being accessed before pulling out the USB storage device.
On first-time startup
1 Start the engine to boot up the system. The "Select Program Language" screen appears.
Basic operation
p From the second time on, the screen shown will differ depending on the previous conditions.
2 Touch the language. 3 Touch . The "Speaker Mode Settings" screen appears. 4 Touch the speaker modes. Standard Mode
4-speaker system with front and rear speakers, or a 6-speaker system with front and rear speakers and subwoofers. Network Mode 3-way system with a high range speaker, middle range speaker and subwoofer (low range speaker) for reproduction of high, middle and low frequencies (bands). WARNING Do not use the unit in standard mode when a speaker system for 3-way network mode is connected to this unit. This may cause damage to the speakers. 5 Touch [OK]. The "Smartphone Setup" screen appears. 6 Touch the item. Refer to Information on the connections and functions for each device on page 17 7 Touch . The top menu screen appears. p Once the speaker mode is set, the setting cannot be changed unless this product is restored to the default settings. Restore the default settings to change the speaker mode setting. Refer to Restoring the default settings on page 49
Switching the speaker mode
To change the speaker mode, you need to restore this product to the default settings. 1 Restore the default setting. Refer to Restoring the default settings on page 49
9
Basic operation
How to use the screens
Application menu screen *4
Time and date setting screen
Abcdefg
Abcdefg
Abcdefg
Abcdefg
Abcdefg
6/10 21 48
Depending on the connection method, the "smartphone setup" screen is displayed.
Application operation screen *4 Source Select
Abcdefg
Abcdefg
Abcdefg
Abcdefg
6/10 21 48
You can control the iPhone or smartphone applications directly on this product.
10
6 2016 21
48
Month/Date Time Format
d/m/y m/d/y y/m/d 12hour 24hour
Top menu screen
*1
*2
21 6/10 48
iPod
Recent application icons
Favorite source icons *3
AV source selection screen *5
21 6/10 48
Disc
Pandora
AUX
iPod
SiriusXM Spotify
AV
Bluetooth Camera
Audio
View
Source OFF PowerOFF
HD Radio
Setting menu screen
System
AV operation screen
iPod Abcdefghi
Abcdefghi
ABC
Pops
6/10 21 48
99999/99999
9999'99"
-9999'99"
Phone menu screen
Phone Book
3 abcdefghi...
ABC
abcdefghi
A
B
abcdefghi
C
abcdefghi
D
E
abcdefghi
F
G abcdefghi
10
Basic operation
*1
The top menu screen of this manual is the screen when using the AppRadioOne. The items displayed
on the screen may vary depending on the connecting
device or mode. When you connect an iPhone via
Bluetooth wireless technology or a smartphone via
USB cable, "Smartphone Setup" screen appears by
touching [APPS].
*2 By pressing the button on any screen you can
display the Top menu screen.
*3
When you connect the external navigation system to this unit, the navigation mode key is displayed at the
left bottom of the display.
*4
By pressing the MODE button you can switch between the Application screen and the AV operation
screen.
*5
If you select "Power OFF", you can turn off almost all functions. The "Power OFF" mode is released in the
following cases:
An incoming call is received.
A rear view camera image is input when the
vehicle reverses.
A button on this product is pressed.
The ignition switch is turned off (ACC OFF), then
turned on (ACC ON).
Supported AV source
You can play or use the following sources with this product. Radio CD ROM (compressed audio files) DVD-Video USB The following sources can be played back or used by connecting an auxiliary device. iPod Spotify® Pandora® Bluetooth audio SiriusXM® Satellite Radio AV input (AV) AUX
Displaying the AV operation screen
1 Press .
2 Touch the AV operation key. The AV operation screen appears.
1
iPod Abcdefghi
Abcdefghi
6/10 21 48
ABC
Pops
99999/99999
9999'99"
-9999'99"
1 Displays the source list.
Selecting a source
Source on the AV source selection screen
1 Display the "AV source selection" screen.
2 Touch the source icon. p When you select "Source OFF", the AV source is turned off.
Source on the source list
1 Display the source list. Refer to Displaying the AV operation screen on page 11 2 Touch the source key. p When you select "Source OFF", the AV source is turned off.
Changing the display order of sources
Changing the display order of source icons
1 Display the "AV source selection" screen.
2 Touch and hold a source icon, and drag the icon to the desired position.
Changing the display order of source keys
1 Display the source list. Refer to Displaying the AV operation screen on page 11 2 Touch . 3 Drag the source key to the desired position.
Using the touch panel
You can operate this product by touching the keys on the screen directly with your fingers. p To protect the LCD screen from damage, be sure to touch the
screen only with your finger gently.
Common touch panel keys
: Returns to the previous screen. : Closes the screen.
11
Basic operation
Operating list screens
1
Songs
Music Video
Playlist abcdefghi Artist abcdefghi Alburm abcdefghi Songs abcdefghi Podcast abcdefghi
2 3
1 Touching an item on the list allows you to narrow down the options and proceed to the next operation.
2 Appears when all characters are not displayed on the display area. If you touch the key, the rest are scrolled for display.
3 Appears when items cannot be displayed on a single page. Drag the slider bar or the list to view any hidden items.
Operating the time bar
1
9999'99"
-9999'99"
1 You can change the playback point by dragging the key. p Playback time corresponding to the position of the key is displayed while dragging the key.
Switching the operation panel
1 Touch . The hidden function keys appears. p This key does not appear for some AV sources.
12
Registration and connection of Bluetooth® device
Displaying the "Bluetooth"
screen
1 Press .
2 Touch , and then . The "Bluetooth" screen appears.
Registering your Bluetooth
devices
p If three devices are already paired, "Memory Full" is displayed. Delete a paired device first.
Refer to Deleting a registered device on page 12
1 Activate the Bluetooth wireless technology on your devices.
2 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
3 Touch [Connection].
4 Touch . The system searches for Bluetooth devices waiting for a connection and displays them in the list if a device is found.
5 Touch the Bluetooth device name. After the device is successfully registered, a Bluetooth connection is established by the system. Once the connection is established, the device name is displayed on the list. p If your device supports SSP (Secure Simple Pairing), a six-
digit number appears on the display of this product. Touch [Yes] to pair the device. p The Bluetooth connection can be also made by detecting this product from the Bluetooth device. Before registration, make sure that "Visibility" in the "Bluetooth" menu is set to "On". For details on a Bluetooth device operations, refer to the operating instructions supplied with the Bluetooth device. Refer to Switching visibility on page 13 p Two cellular phones can be connected to this product at the same time. Refer to Switching the connected Bluetooth device on page
13 p If you try to connect an unconnected cellular phone while
two cellular phones are already connected, the first one of the two connected cellular phones will be disconnected and the unconnected cellular phone will be connected instead.
Setting Bluetooth device auto connection
This function connects the last connected Bluetooth device to this product automatically as soon as the two devices are less than a few meters apart. The default setting is "On". p If two Bluetooth devices were connected the last time, the
two devices are connected to this product automatically in the order that they are registered in the device list.
1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
2 Touch [Auto Connect] to switch "On" or "Off".
Deleting a registered device
CAUTION Never turn this product off while the paired Bluetooth device is being deleted.
1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
2 Touch [Connection].
3 Touch .
Connecting a registered Bluetooth device manually
Connect the Bluetooth device manually in the following cases: Two or more Bluetooth devices are registered, and you want
to manually select the device to be used. You want to reconnect a disconnected Bluetooth device. Connection cannot be established automatically for some
reason.
1 Activate the Bluetooth wireless technology on your devices.
2 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
3 Touch [Connection].
4 Touch the name of the device. p To disconnect the device, touch the name of the connected
device in the list.
Registration and connection of Bluetooth® device
Switching visibility
This function sets whether or not to make this product visible to the other device. The default setting is "On". 1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12 2 Touch [Visibility] to switch "On" or "Off".
Entering the PIN code for Bluetooth wireless connection
To connect your Bluetooth device to this product, you need to enter a PIN code. You can change the PIN code with this function. p The default PIN code is "0000". 1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12 2 Touch [PIN Code Input]. 3 Touch [0] to [9] to input the pin code (up to
8 -digits). 4 Touch .
Displaying the device information
1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12 2 Touch [Device Information]. The device name and address of the Bluetooth device on this product are displayed.
Clearing the Bluetooth memory
p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. CAUTION
Never turn this product off while the Bluetooth memory is being cleared.
1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12 2 Touch [Bluetooth Memory Clear].
3 Touch [Clear]. The confirmation screen appears.
Updating Bluetooth software
This function is used to update this product with the latest Bluetooth software. For details on Bluetooth software and updating, refer to our website. p The source is turned off and the Bluetooth connection is
disconnected before the process starts. p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake. p You need to store the version update file to the USB storage
device in advance.
CAUTION Never turn this product off and never disconnect the phone while the software is being updated.
1 Connect the USB storage device stored the version update file to this unit.
Refer to Plugging and unplugging a USB storage device on page 8
2 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
3 Touch [BT Software Update].
4 Touch [Start]. Follow the on-screen instructions to finish updating the Bluetooth software.
Displaying the Bluetooth software version
If this product fails to operate properly, you may need to consult your dealer for repair. In such cases, perform the following procedure to check the software version on this unit.
1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
2 Touch [Bluetooth Version Information]. The version of this product's Bluetooth module appears.
Switching the connected
Bluetooth device
After registering and connecting the Bluetooth devices to this product, you can switch among the devices using the switch devices key in the phone function and some audio sources. p You can register up to three Bluetooth devices on this
product. Refer to Registering your Bluetooth devices on page 12 p You can connect one of the registered devices to this product. In cases where the registered device is equipped with a phone function, a total of two devices can be connected at the same time when using the phone function. If two of the three registered devices are already connected, you can connect the remaining third device to use the audio function only from the switch devices key on the audio source screen. p The icon for the cellular phone currently being used is displayed on the "Phone menu" screen. If you connect two cellular phones to this product at the same time, you can switch between the cellular phones using the switch devices key. The contents of the phone menu are memorized for each connected cellular phone. Refer to Hands-free phoning on page 14 p The switch devices key will appear for some audio sources. The audio source may automatically switch to another source depending on the selected device.
13
Hands-free phoning
Synchronizes the contacts on this product's phone book with the contacts on your phone manually.
Phone Book
3 abcdefghi...
ABC
*1 abcdefghi
A
*2
B
abcdefghi
C
*3
D
abcdefghi
E *4
abcdefghi
F
*5
G
abcdefghi
*6
Switches the search language to English or system language.
*5
Switches to the voice recognition function (for iPhone).
Refer to Using the voice recognition function (for
iPhone) on page 15
*6
If you connect two cellular phones to this product at the same time, you can switch between the cellular
phones using the switch devices key. The following
items are displayed on the key.
Name of the current cellular phone
List number of the current cellular phone
Battery status of the current cellular phone
Reception status of the current cellular phone
Refer to Switching the connected Bluetooth device
on page 13
CAUTION
For your safety, avoid talking on the phone as much as possible while driving.
To use this function you need to connect your cellular phone to this product via Bluetooth in advance. Refer to Registration and connection of Bluetooth® device on
page 12
Calling a number in the phone book
p The contacts on your phone will be automatically transferred to this product.
p "Visibility" of the "Bluetooth" screen should be on. Refer to Switching visibility on page 13
p If two cellular phones are automatically connected to this product with the Bluetooth device auto connect function, the phone book of the second phone is displayed.
1 Display the "Phone menu" screen. Refer to Displaying the Phone menu screen on page 14
2 Touch .
3 Touch the desired name on the list.
4 Touch the phone number. The dial screen appears and dialing starts.
5 Touch to end the call.
Dialing from the history
1 Display the "Phone menu" screen. Refer to Displaying the Phone menu screen on page 14
*1
Switches to the preset dial screen. Refer to Using the preset dial lists on page 14
*2
Switches to the phone book list. Refer to Calling a number in the phone book on
page 14
*3
Switches to the missed, received and dialed call lists. Refer to Dialing from the history on page 14
*4
Switches the mode to enter the phone number directly.
Refer to Direct dialing on page 14
Displaying the Phone menu screen
1 Press . 2 Touch . The Phone menu screen appears.
Making a phone call
You can make a phone call in many different ways.
2 Touch .
3 Touch the item to switch the history list. The following items are available: : Received call list : Dialed call list : Missed call list
4 Touch the desired entry on the list to make a call.
The dial screen appears and dialing starts.
5 Touch to end the call.
Direct dialing
Using the preset dial lists
1 Display the "Phone menu" screen.
Registering a phone number
Refer to Displaying the Phone menu screen on page 14
You can easily store up to six phone numbers per device as
2 Touch .
presets.
3 Touch the number keys to enter the phone number.
4 Touch to make a call.
1 Display the "Phone menu" screen. Refer to Displaying the Phone menu screen on page 14
2 Touch or . On the "Phone Book" screen, touch the desired name to display
5 Touch to end the call.
the contact's phone number.
14
p You may hear a noise when you hang up the phone.
Hands-free phoning
3 Touch .
Dialing from the preset dial list
1 Display the "Phone menu" screen. Refer to Displaying the Phone menu screen on page 14 2 Touch . 3 Touch the desired item. The dial screen appears and dialing starts.
Receiving a phone call
p When two phones are connected at the same time, if an incoming call is received on the second phone while you are talking on the first phone, the dial confirmation screen for the second phone will be displayed.
1 Touch to answer the call. If you touch while getting a call waiting, you
can switch to the talking person. Touch to reject the call. 2 Touch to end the call.
Minimizing the dial confirmation screen
p The dial confirmation screen cannot be minimized on the AV operation screen.
p AV sources cannot be selected even if the dial confirmation screen is minimized while talking on the phone or receiving an incoming call.
1 Touch . Touch to display the dial confirmation screen
again.
Changing the phone settings
Setting auto answering
You can select whether or not to answer a call automatically. The default setting is "Off". p Even if an incoming call is received on the other connected
phone while you are talking on the phone, the incoming call will not be answered automatically.
1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
2 Touch [Auto Answer] to switch "On" or "Off".
Switching the ring tone
You can select whether or not to use this product's ring tone. The default setting is "On".
1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
2 Touch [Ring Tone] to switch "On" or "Off".
Inverting names in the phone book
You can use this function to change the order of the first and last names in the phone book.
1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
2 Touch [Invert Name].
Setting the private mode
During a conversation, you can switch to private mode (talk directly on your cellular phone).
1 Touch or to turn private mode on or off.
p If two cellular phones are connected to this product and the first phone is set to private mode, you can receive incoming calls on the second phone while maintaining the call in progress on the first phone.
p When two cellular phones are connected to this product and private mode of the first phone is turned off, if an incoming call on the second phone is answered while a call is in progress on the first phone or while dialing or receiving a call on the first phone, the call, dialing, or receiving on the first phone is ended.
Adjusting the other party's listening volume
This product can be adjusted to the other party's listening volume.
1 Touch
to switch between the three vol-
ume levels.
Using the voice recognition function (for iPhone)
By connecting your iPhone to this product, you can use the voice recognition function (Siri Eyes Free Mode) on this product. p When an iPhone running iOS 6.1 or higher is used, Siri Eyes
Free Mode is available with this product. p In this chapter, iPhone and iPod touch will be referred to as
"iPhone".
1 Display the "Phone menu" screen. Refer to Displaying the Phone menu screen on page 14
2 Touch . The voice recognition function launches and the voice control screen appears. p You can also launch the voice recognition function by press-
ing and holding . p If two cellular phones are automatically connected to this
product with the Bluetooth device auto connect function, the voice recognition function (Siri Eyes Free Mode) will be set on the second phone. p If you want to use the voice recognition function (Siri Eyes Free Mode) on another connected iPhone, touch 1 2 3 to switch to the other iPhone. The iPhone that you switch to will be set as the current device.
Setting phone book auto synchronization
You can select whether or not to synchronize the the phone book with the contacts on your phone automatically when you connect the phone to this product. The default setting is "Off".
1 Display the "Bluetooth" screen. Refer to Displaying the "Bluetooth" screen on page 12
2 Touch [Phone Book Auto Synchronize] to switch "On" or "Off".
Notes for hands-free phoning
General notes Connection to all cellular phones featuring Bluetooth wire-
less technology is not guaranteed. The line-of-sight distance between this product and your
cellular phone must be 10 meters or less when sending and receiving voice and data via Bluetooth technology.
15
Hands-free phoning
With some cellular phones, the ring sound may not be output from the speakers.
If private mode is selected on the cellular phone, hands-free phoning may be disabled.
Registration and connection Cellular phone operations vary depending on the type of cel-
lular phone. Refer to the instruction manual that came with your cellular phone for detailed instructions. When phone book transfer does not work, disconnect your phone and then perform pairing again from your phone to this product.
Making and receiving calls You may hear a noise in the following situations:
-- When you answer the phone using the button on the phone.
-- When the person on the other end of the line hangs up the phone.
If the person on the other end of the line cannot hear the conversation due to an echo, decrease the volume level for hands-free phoning.
With some cellular phones, even after you press the accept button on the cellular phone when a call comes in, handsfree phoning may not be performed.
The registered name will appear if the phone number is already registered in the phone book. When one phone number is registered under different names, only the phone number will be displayed.
The received call and the dialed number histories You cannot make a call to the entry of an unknown user (no
phone number) in the received call history. If calls are made by operating your cellular phone, no history
data will be recorded in this product.
Phone book transfers If there are more than 1 000 phone book entries on your cel-
lular phone, not all entries may download completely. Depending on the phone, this product may not display the
phone book correctly. If the phone book in the phone contains image data, the
phone book may not be transferred correctly. Depending on the cellular phone, phone book transfer may
not be available.
Setup for iPod / iPhone or smartphone
When using an iPod / iPhone or a smartphone with this product, configure the settings of this product according to the device to be connected. This section describes the settings required for each device.
The basic flow of iPod / iPhone or smartphone setup
1 Select the method for connecting your device. Refer to Setting the device connection method on page 16 2 Connect your device to this product. Refer to Connection on page 50 3 If necessary, connect your device to this product via Bluetooth connection. Refer to Registration and connection of Bluetooth® device on page 12
Setting the device connection method
To use the application for iPhone or smartphone on this product, select the method for connecting your device. Settings are required according to the connected device. 1 Display the "System" setting screen.
2 Touch [Input/Output settings]. 3 Touch [Smartphone Setup]. 4 Touch the following settings. Device: Select the device to be connected. Connection / Application: Select the connection method. Refer to Information on the connections and functions for
each device on page 17 The setting will change after the following processes are automatically executed. -- The source is turned off. -- AppRadioOne is exited. -- The smartphone connection (USB and Bluetooth) is
disconnected.
iPod compatibility
This product supports only the following iPod models and iPod software versions. Others may not work correctly. iPhone 4, 4s, 5, 5c, 5s, 6, 6 Plus: iOS 7.0 or later. iPhone 3GS: iOS 6.0.1 iPod touch (4th, 5th generation): iOS 6.0.1 iPod touch (3rd generation): iOS 5.1.1 iPod touch (2nd generation): iOS 4.2.1 iPod classic 160GB (2009): Ver. 2.0.4 iPod classic 160GB (2008): Ver. 2.0.1 iPod classic 80GB: Ver. 1.1.2 iPod nano (7th generation) iPod nano (6th generation): Ver. 1.2 iPod nano (5th generation): Ver. 1.0.2 iPod nano (4th generation): Ver. 1.0.4 iPod nano (3rd generation): Ver. 1.1.3 p You can connect and control an iPod compatible with this
product by using separately sold connector cables. p Operation methods may vary depending on the iPod model
and the software version. p Depending on the software version of the iPod, it may not be
compatible with this product. For details about iPod compatibility with this product, refer to the information on our website. This manual applies to the following iPod models. iPod with 30-pin connector iPhone 3GS, 4, 4s iPod touch 2nd, 3rd, 4th generation iPod classic 80GB, 160GB iPod nano 3rd, 4th, 5th, 6th generation iPod with Lightning connector iPhone 6, 6 Plus iPhone 5, 5c, 5s iPod touch 5th generation iPod nano 7th generation
AndroidTM device compatibility
p Operation methods may vary depending on the Android device and the software version of the Android OS.
p Depending on the version of the Android OS, it may not be compatible with this product.
p Compatibility with all Android devices is not guaranteed. For details about Android device compatibility with this product, refer to the information on our website.
16
Setup for iPod / iPhone or smartphone
Information on the connections and functions for each device
The settings and cables required for connecting each device, and the available sources are as follows.
iPod / iPhone with a 30-pin connector Device connection method
Smartphone Setup
Bluetooth connection Available sources
Device Connection
iPod (audio) iPod (video) Pandora Spotify
When connecting via Bluetooth
iPhone / iPod Wireless via BT Bluetooth connection is required. --
When connecting via CD-IU201V (sold separately) iPhone / iPod USB --
When connecting via CD-IU51 (sold separately) iPhone / iPod USB -- --
iPod / iPhone with a Lightning connector
Device connection method
Smartphone Setup
Device
Connection
Bluetooth connection
Available sources
iPod (audio)
iPod (video)
Pandora
Spotify
AppRadioOne
When connecting via Bluetooth iPhone / iPod Wireless via BT Bluetooth connection is required. -- --
When connecting via CD-IU52 (sold separately) iPhone / iPod USB -- --
Android device Device connection method Smartphone Setup
Bluetooth connection Available sources
Device Application
Pandora Spotify AppRadioOne
When connecting via Bluetooth Others USB/MTP Bluetooth connection is required. --
When connecting via CD-MU200 (sold separately) Others AppRadioOne -- -- --
When "Application" of "Smartphone Setup" is set to "AppRadioOne".
17
Radio
Displays the preset channel list. Select an item on the list ("1" to "6") to switch to the preset channel.
Selects the FM1, FM2, FM3 or AM band.
Radio 1
6/10 21 48
2
FM1 AM
3
Abcdefghi
4
Abcdefghi Abcdefghi
5
6
000.00 MHz
Performs manual tuning.
HOLD Performs seek tuning or non stop seek tuning.
Releasing the key in a few seconds, skips to the nearest station from the current frequency. Keeping holding the key for a long seconds, performs non stop seek tuning.
Recalls the preset channel stored to a key from memory.
HOLD Stores the current broadcast frequency to a key.
Stores song information to an iPod. Refer to Storing song information to an iPod
(iTunes Tagging) on page 48
p By pressing
or
, you can also switch the preset
channels.
p By pressing and hold
or
and release, you can
also perform seek tuning.
18
p By keeping touching and holding or , you can perform non stop seek tuning. Touch again to cancel.
Starting procedure
1 Display the "AV source selection" screen.
2 Touch [Radio]. The "Radio" screen appears.
Storing the strongest broadcast frequencies
The BSM (best stations memory) function automatically stores the six strongest broadcast frequencies under the preset tuning keys "1" to "6". p Storing broadcast frequencies with BSM may replace those
you have already saved. p Previously stored broadcast frequencies may remain stored
if the number of frequencies stored has not reached the limit. 1 Touch . 2 Touch to begin a search. While the message is displayed, the six strongest broadcast frequencies will be stored under the preset tuning keys in order of their signal strength. If you touch [Cancel], the storage process is canceled.
Tuning into strong frequencies
p This setting is available only when "Radio" is selected as the source.
Local seek tuning allows you to only tune into those radio stations with sufficiently strong signals. 1 Display the "System" setting screen.
3 Touch [Radio settings].
4 Touch [Local].
5 Touch the item. Off (default):
Turns the seek tuning setting off. Level1 to Level4:
Sets the level of sensitivity for FM to Level1 to Level4 (for AM Level1 or Level2). p The FM "Level4" (AM "Level2") setting allows reception of only stations with the strongest signals.
2 Touch [AV Source Settings].
Disc
Track number indicator
Audio source screen 1
CD
6/10 21 48
Track 99
*1
9999'99" Pause -9999'99"
*2 Skips files forward or backward.
Switches between playback and pause.
Plays files in random order. This function is available for music CD.
: Does not play tracks in random order.
: Plays all tracks in random order.
Audio source screen 2
CD
6/10 21 48
Track 99
Hides the touch panel keys. To display again the keys, touch anywhere on the screen.
Performs frame-by-frame playback.
HOLD Performs slow-motion playback.
Each time you touch
it changes
the speed in four steps in the following
order: 1/16 1/8 1/4 1/2
Video source screen 1
DVD
6/10 21 48
*3
Stop 99 99
Full
*4
*5
01
OFF
9999'99"
Pause
-9999'99"
Performs fast reverse or fast forward. Touch again to change play back the speed.
Stops playback.
Video source screen 2
DVD
6/10 21 48
Stop 99 99
L+R
01
9999'99"
Pause
-9999'99"
Sets a repeat play range. : Repeats all files.
: Repeats the current chapter.
: Repeats the current title.
Changes the viewing angle (Multi-angle). This function is available for DVDs featuring multi-angle recordings. Selects the audio output from [L+R], [Left], [Right], [Mix]. This function is available for Video-CDs and DVDs recorded with LPCM audio.
Sets a repeat play range. : Repeats the current disc. : Repeats the current track.
19
Disc
Video source screen 2
DVD
6/10 21 48
Stop 99 99
L+R
01
9999'99"
Pause
-9999'99"
*6
Resumes playback (Bookmark). This function is available for DVD-Video. You can memorize one point as a Bookmark for a disc (up to five discs). To clear the bookmark on the disc, touch and hold this key.
Returns and begins playback from the specified point. This function is available for DVD-Video and Video-CDs featuring PBC (playback control).
*5
Switches the subtitle/audio language. Refer to Switching the subtitle/audio language on
page 20
*6
Displays the DVD menu keypad. Refer to Operating the DVD menu using touch
panel keys on page 20
p By pressing
or , you can also skip files/chapters
forward or backward.
p By pressing and holding
or , you can also perform
fast reverse or fast forward.
p If a Video-CD with PBC On is being played,
appears.
p You can set the screen size for the video image.
Refer to Common operations on page 48
Starting procedure
You can play a normal music CD, Video-CD or DVD-Video using the built-in drive of this product.
CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
1 Insert the disc. The source changes and then playback will start. Refer to Inserting and ejecting a disc on page 8 p If the disc is already set, select [Disc] as the playing source.
Selecting files from the file
Switches the media file type to CD (audio data (CD-DA)).
Searching for the part you want to play
p For DVD-Videos, you can select [Title], [Chapter] or [10Key]. p For Video-CDs, you can select [Track] or [10Key] (PBC only). 1 Touch . 2 Touch the item to select the search function. 3 Touch [0] to [9] to input the desired number. p To cancel an input number, touch [C]. 4 Touch to start playback from the number
you registered.
Operating the DVD menu
You can operate the DVD menu by touching the menu item on the screen directly. p This function may not work properly with some DVD disc
content. In that case, use touch panel keys to operate the DVD menu. 1 Touch or . 2 Touch the desired menu item.
Switching the subtitle/audio language
*1
Selects a track from the list. Refer to Selecting files from the file name list on
page 20
*2
Switches the media file type. Refer to Switching the media file type on page
name list
1 Touch . 2 Touch a track on the list to play back.
1 Touch or to change the language. : Changes the subtitle language. : Changes the audio language. p You can also switch the subtitle/audio languages using the
"DVD/DivX Setup" menu. Refer to Setting the top-priority languages on page 46
20
*3
Searches for the part you want to play. Refer to Searching for the part you want to play on
page 20
Switching the media file type
When playing a digital media containing a mixture of various media file types you can switch between media file types to play.
Operating the DVD menu using touch panel keys
*4
Displays the DVD menu. Refer to Operating the DVD menu on page 20
1 Touch . 2 Touch the item.
If items on the DVD menu appear, the touch panel keys may overlay them. If so, select an item using those touch panel keys.
Music: Switches the media file type to music (compressed audio).
Video:
1 Touch . 2 Touch , , or to select the desired
Switches the media file type to video.
menu item.
20
CD-DA:
Disc
3 Touch . p The way to display the menu differs depending on the disc. If you touch , you can operate the DVD menu
directly.
Compressed files
Audio source screen 1 (Example: USB)
USB Abcdefghi
21 48
6/10
*1 *2
Abcdefghi
*3
ABC
R&B
9999'99"
-9999'99"
*4
Skips files forward
or backward.
Switches between playback and pause.
Switches the current music information display.
Plays files in random order. : Does not play files in random order.
: Plays all files within the repeat range in random order.
Audio source screen 2 (Example: USB)
USB Abcdefghi
Abcdefghi
6/10 21 48
ABC
R&B
DB
Sets a repeat play range.
or
: Repeats all files.
: Repeats the current folder.
: Repeats the current file.
Selects the previous folder or the next folder.
Constructs the database for using the Music Browse mode.
This function is available only for USB.
21
Compressed files
Hides the touch panel keys. To display again the keys, touch anywhere on the screen.
Video source screen (Example: Disc)
ROM
6/10 21 48
*3
Stop
Abcdefghi
Abcdefghi
*5
Full
01
OFF
9999'99"
Pause
-9999'99"
Sets a repeat play range.
or
: Repeats all files.
: Repeats the current folder.
: Repeats the current file.
Performs frame-by-frame playback. HOLD Performs slow-motion playback.
Stops playback.
Video source screen (Example: Disc)
ROM
6/10 21 48
Stop Abcdefghi
Full
Abcdefghi
01
OFF
9999'99"
Pause -9999'99"
*4 Performs fast reverse or fast forward. Touch again to change the playback speed.
Switches between playback and pause.
Hides the touch panel keys. To display again the keys, touch anywhere on the screen.
Rotates the displayed picture 90° clockwise.
Selects the previous or next folder.
Still image screen
USB
6/10 21 48
*3
Abcdefghi
Trimming
Abcdefghi
*6
Sets a repeat play range. : Repeats all files. : Repeats the current folder.
Plays files in random order. : Does not play files in random order. : Plays all files in the current repeat play range in random order.
22
Compressed files
Still image screen
USB
6/10 21 48
Abcdefghi
Trimming
Abcdefghi
*4 Skips files forward or backward.
Switches between playback and pause.
*1
Displays the MIXTRAX screen. Refer to MIXTRAX on page 37
*2
Displays the link search screen. This function is available for the USB storage device
only.
Refer to Selecting a song from the list related to
the song currently playing (link search) on page
24
*3
Selects a file from the list. Refer to Selecting files from the file name list on
page 23
p When you play compressed audio files stored in
a USB storage device, you can search for a file
using Music Browse.
Refer to Selecting a file using Music Browse mode
on page 23
*4
Switches the media file type. Refer to Switching the media file type on page
23
*5
Switches the subtitle/audio language. This function is available only for compressed video
files stored on a disc.
Refer to Switching the subtitle/audio language on
page 20
*6
Saves the current image as the wallpaper. Refer to Saving the image as the wallpaper on
page 24
You can play compressed audio, compressed video or still image
files stored in a disc or a USB storage device.
Refer to Media compatibility chart on page 61
p By pressing
or , you can also skip files forward or
backward.
p By pressing and holding
or , you can perform fast
reverse or fast forward.
p By pressing and holding
or
on the still image file,
you can search through 10 JPEG files at a time. If the file
currently being played is the first or last file in the folder, the
search is not performed.
p JPEG images are not displayed in the rear display.
p You can set the screen size for the video and JPEG images.
Refer to Common operations on page 48
CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Starting procedure (for Disc)
1 Insert the disc. The source changes and then playback will start. Refer to Inserting and ejecting a disc on page 8 p If the disc is already set, select [Disc] as the playing source.
Starting procedure (for USB)
1 Display the "AV source selection" screen.
2 Plug the USB storage device. Refer to Plugging and unplugging a USB storage device on
page 8
3 Touch [USB].
p Play back is performed in order of folder numbers. Folders are skipped if they contain no playable files.
Operations common to all file types
Selecting files from the file name list
You can find files or folders to play back using the file name or folder name list.
1 Touch .
2 Touch a file on the list to play back. p Touching a folder on the list shows its contents. You can play
a file on the list by touching it.
Switching the media file type
When playing a digital media containing a mixture of various media file types you can switch between media file types to play.
1 Touch .
2 Touch the item. Music:
Switches the media file type to music (compressed audio). Video:
Switches the media file type to video. CD-DA:
Switches the media file type to CD (audio data (CD-DA)). Photo:
Switches the media file type to still image (JPEG data).
Audio file operations
Selecting a file using Music Browse mode
You can select files to play back using the category list if the files contain tag information. p This function is available for the USB storage device only.
1 Touch DB to create a database. Music Browse mode will be available after the database has been created.
2 Touch .
3 Touch the desired category to display the file
list.
23
Compressed files
4 Touch the item. Refine the item until the desired song title or file name is displayed on the list.
5 Touch the desired song title or file name to play back.
p If the selection made with Music Browse has been canceled, you can switch to Music Browse mode again by touching the [Tag] tab on the file/folder list screen and touching the desired track.
Selecting a song from the list related to the song currently playing (link search)
p If you touch the artwork, the list of songs in the album is displayed.
p This function is available for the USB storage device only.
1 Switch to Music Browse mode. Refer to Selecting a file using Music Browse mode on page
23
2 Touch song information to open the list of songs.
3 Touch the song to play back.
Still image file operations
p If you save the new image, the current wallpaper is overwritten.
Setting the slideshow interval
JPEG files can be viewed as a slideshow on this product. In this setting, the interval between each image can be set. The default setting is "10sec". p This setting is available during playback of the JPEG files. 1 Display the "Video Setup" screen.
2 Touch [Time Per Photo Slide]. 3 Touch the item. The following items are available: 5sec, 10sec, 15sec, Manual.
Saving the image as the wallpaper
You can save the currently displayed image in the memory of this product and set it as the wallpaper for the AV screen or the top menu screen.
1 Display an image on the screen. Refer to Starting procedure (for USB) on page 23 Refer to Operations common to all file types on page 23
2 Touch on the image.
3 Touch the following items. As AVScreen:
Saves the image as the wallpaper for the AV screen. As HomeScreen:
Saves the image as the wallpaper for the top menu screen. As Both:
Saves the image as the wallpaper for both the AV screen and top menu screen.
4 Touch "Yes" to overwrite the image. 24
iPod
Audio source screen 1
*1
iPod 21 48
6/10
Abcdefghi
*2
*3
Abcdefghi
*4
ABC
Pops
99999/99999
9999'99"
-9999'99"
Skips files forward or backward.
Switches between playback and pause.
iPod
Changes the audiobook speed. 1 : Normal playback 2 : Fast playback 1/2 : Slow-motion playback
Plays files in random order. : Plays randomly songs or videos within the selected list.
: Plays album randomly.
Audio source screen 2
iPod 21 48
6/10
Abcdefghi
*5
Abcdefghi
ABC
Pops
x1
99999/99999
Sets a repeat play range. : Repeats all in the selected list. : Repeats the current song or video.
Video source screen
iPod Abcdefghi
6/10 21 48
*3
*4 99999/99999
Full
9999'99"
-9999'99"
Performs fast reverse or fast forward.
*1
Displays the "MIXTRAX" screen. Refer to MIXTRAX on page 37
*2
Displays the link search screen. Refer to Selecting a song from the list related to
the song currently playing (link search) on page
26
*3
Selects a song or video from the list. Refer to Selecting song or video sources from the
playlist screen on page 25
*4
Switches the control mode to "App Mode". Refer to Using this product's iPod function from
your iPod on page 26
*5
Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.
Refer to Switching the connected Bluetooth device
on page 13
p By pressing the
or
button, you can also skip files
forward or backward.
p By pressing and hold the
or
button, you can also
perform fast reverse or fast forward.
p You can set the screen size for the video image.
Refer to Common operations on page 48
Connecting your iPod
When connecting an iPod to this product, select the method for connecting your device. Settings are required according to the connected device.
Refer to Setup for iPod / iPhone or smartphone on page 16 p The available sources vary depending on the selected
method for connecting your device. Refer to Information on the connections and functions for
each device on page 17
CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Starting procedure
1 Connect your iPod. Refer to Connecting your iPod on page 25 The source changes and then playback will start. p When connecting an iPhone or iPod touch, quit all applica-
tions before connecting the device.
2 Display the "AV source selection" screen.
3 Touch [iPod].
Selecting song or video sources from the playlist screen
You can search for the song or video you want to play from the playlist screen.
1 Touch .
2 Touch or to switch the music or video category list.
3 Touch the category. If you use English as the system language, the alphabet search function is available. Touch the initial search bar to use this function.
4 Touch the title of the list. If you can not find the desired song or video, try to search again according to the above steps.
5 Start playback of the selected list.
p Depending on the generation or version of the iPod, some
functions may not be available.
p You can play playlists created with the MusicSphere applica-
tion. The application is available on our website.
25
iPod
AppRadioOne
Using this product's iPod function from your iPod
You can control this product's iPod function from the iPod on "App Mode". The application screen of the iPod can be displayed on this product, and the music files and video files are played back with this product. p This function is not available when using iPod function with
an iPhone 6 Plus, iPhone 6, iPhone 5s, iPhone 5c, iPhone 5, or iPod touch (5th generation). p While this function is in use, the iPod will not turn off even if the ignition key is turned off. Operate the iPod to turn off the power. 1 Touch . 2 Operate the connected iPod to select a video or song and play. p Some functions are still accessible from this product even if the control mode is set to "App Mode". However, the operation will depend on your applications. p Touch to switch the control mode.
Selecting a song from the list related to the song currently playing (link search)
p If you touch the artwork, the list of songs in the album is displayed.
1 Touch song information to open the list of songs.
2 Touch the song to play back.
26
Displays the launcher application screen.
Displays the previous screen.
AppRadioOne
Abcdefg
Abcdefg
Abcdefg
Abcdefg
Abcdefg
6/10 21 48
Displays the current source.
Displays the menu screen.
p Press the DISP button to hide the App control side bar. Press
the DISP button again to display it again.
p
and are not available depending on the type of
device.
WARNING
Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
Using AppRadioOne
You can control applications for an iPhone or a smartphone directly from the screen (AppRadioOne). In AppRadioOne, you can operate applications with finger gestures such as tapping, dragging, scrolling or flicking on the screen of this product. p The compatible finger gestures vary depending on the
application for an iPhone or a smartphone.
p Even though an application is not compatible with AppRadioOne, depending on the application an image may be displayed. But you can not operate the application.
To use AppRadioOne, install the AppRadio app on the iPhone or smartphone in advance.
p Be sure to read Using app-based connected content before you perform this operation.
Refer to Using app-based connected content on page 64
Pioneer is not liable for any issues that may arise from incorrect or flawed app-based content.
The content and functionality of the supported applications are the responsibility of the App providers.
In AppRadioOne, functionality through the product is limited while driving, with available functions determined by the App providers.
Availability of AppRadioOne functionality is determined by the App provider, and not determined by Pioneer.
AppRadioOne allows access to applications other than those listed (subject to limitations while driving), but the extent to which content can be used is determined by the App providers.
Starting procedure
When connecting an iPhone or smartphone to this product, you must select the method for connecting your device. Settings are required according to the connected device. Refer to Setup for iPod / iPhone or smartphone on page 16
For iPhone users
1 Connect your iPhone. Refer to iPhone with Lightning connector on page 52
2 Press .
3 Touch [APPS]. When the application is ready to launch, messages appear on the screen of this product.
4 Use your iPhone to launch the application. The AppRadio app is launched.
5 Touch [OK]. The AppRadioOne screen (Application menu screen) appears.
AppRadioOne
For smartphone (Android) users
1 Unlock your smartphone and connect it to this product via USB.
Refer to Android device on page 53
2 Press .
3 Touch [APPS]. The AppRadio app is launched, and the AppRadioOne screen (Application menu screen) appears.
Common operation of all device
p If you connect your device while an AppRadioOnecompatible application is already running, the application operation screen will appear on this product.
p Touch the desired application icon after the AppRadio app is launched.
p The desired application is launched, and the application operation screen appears.
p Press to go back to the Top menu screen.
Using the keyboard
When you tap the text input area of an application for iPhone, a keyboard will be displayed on the screen. You can input the desired text directly from this product.
CAUTION For your safety, the keyboard functionality is only available when the vehicle is stopped and the parking brake is engaged.
p This function is only available in AppRadioOne on the iPhone.
1 Start up the AppRadioOne. Refer to Starting procedure on page 26
2 Touch the text input area on the application operation screen.
A keyboard for entering text appears. p The language of the keyboard can be changed. Refer to Setting the keyboard language with the application for
iPhone on page 39
Using the audio mix function
You can output audio mixing AV source and an application for iPhone or smartphone when the AppRadioOne is used. p Depending on the application or the AV source, this function
may not be available.
1 Start up the AppRadioOne.
2 Press the Volume (+/) button. The audio mix menu will be displayed on the screen.
APP HRDadRioadio
Vol. 15 Vol. 12
1
2
1 Touch to mute. Touch again to unmute so that the sound is not mixed.
2 Adjusts the audio volume. Each touch of [+] or [] increases or decreases the volume level. p The AV operation screen and the Application screen can be switched by pressing .
Pandora®
Gives a "Thumbs Down" to the playing track and skips to the next track.
Playback screen 1
Pandora 1
Pandora 6/10 21 48
2 Abcdefghi
3
Abcdefghi
*1
4
Abcde ABC
5
Pause
1/2
6
9999'99"-9999'99"
Gives a "Thumbs Up" to the playing track.
Skips tracks forward.
Switches between playback and pause.
27
Pandora®
Displays the preset station list. Select an item on the list ("1" to "6") to switch to the preset station.
Playback screen 2
Pandora 1
Pandora 6/10 21 48
2 Abcdefghi
3
Abcdefghi
4
Abcde ABC
5
2/2
6
*2
Adds information for the track currently playing to bookmarks.
*3
Recalls the preset station stored to a key from memory.
*1
Selects a Pandora station from the list. Refer to Selecting a Pandora station from the list
on page 28
*2
Creates a new station. Refer to Adding a station on page 28
*3
Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.
Refer to Switching the connected Bluetooth device
on page 13
p By pressing the
button, you can skip songs forward.
p
and are not available when using a shared station.
p In this chapter, iPhone and iPod touch will be referred to as
"iPhone".
28
WARNING Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
Pandora operations
You can enjoy Pandora by connecting an iPhone or a smartphone that has the Pandora application installed.
Important Requirements to access Pandora using Pioneer car audio/
video Refer to Setup for iPod / iPhone or smartphone on page
16 Please update the firmware of the Pandora application to
the latest version before use. Download it from the iTunes App Store or Google Play.
Starting procedure
When connecting an iPhone or smartphone to this product, select the method for connecting your device. Settings are required according to the connected device. Refer to Setup for iPod / iPhone or smartphone on page 16 p You can use the Pandora service by connecting an iPhone
via USB or Bluetooth. p If you use a smartphone, connect via Bluetooth. Refer to iPhone with 30-pin connector on page 53 Refer to iPhone with Lightning connector on page 52 Refer to Registering your Bluetooth devices on page 12
1 Unlock and connect your device.
2 Display the "AV source selection" screen.
To use the Pandora service, you need to connect to the Internet via 3G, EDGE, LTE (4G) or Wi-Fi network. If the data plan for your iPhone does not provide for unlimited data usage, additional charges from your carrier may apply.
Limitations:
Depending on the availability of the Internet, you may not be able to receive the Pandora service.
The Pandora service is subject to change without notice. The service could be affected by any of the following: firmware version of the iPhone, firmware version of the Pandora application, changes to the Pandora music service.
Certain functions of the Pandora service are not available when accessing the service through Pioneer car audio/ video products. They include, but are not limited to the following: creating new stations, deleting stations, sending information about current stations, buying tracks from iTunes, viewing additional text information, logging in to Pandora, adjusting Cell Network Audio Quality.
Pandora internet radio is a music service not affiliated with Pioneer.
3 Touch [Pandora].
Selecting a Pandora station from the list
1 Touch .
The following items are available:
: switches to the station list.
: switches to the genre list.
: plays only one track based on particular musical char-
acteristics from several shuffled stations.
A-Z: sorts the items in the list alphabetically.
Date: sorts the items in the list in the order of the dates.
: deletes the station.
p Shared stations are indicated by .
Adding a station
1 Touch .
2 Touch [Track] (from track) or [Artist] (from artist).
Pandora®
A new station is created.
Storing the preset stations
You can store six stations to the preset keys "1" to "6". 1 Touch . 2 Touch and hold an item on the preset station
list for a few seconds. The current station is stored under a preset key.
Spotify®
Playback screen 1 (Track)
Spotify Abcdefghi
21 48 Spotify 6/10
Abcdefghi
*1
ABC
PLAYING FROM PLAYLIST
9999
9999'99"
-9999'99"
Skips tracks forward or backward.
Saves or deletes the current song information to or from "Your Music".
Switches between playback and pause.
Plays tracks in random order.
Playback screen 2 (Track)
Spotify Abcdefghi
21 48 Spotify 6/10
Abcdefghi
ABC
PLAYING FROM PLAYLIST
9999
9999
*2
Sets a repeat play range.
Switches to radio mode.
29
Spotify®
Playback screen 1 (Radio mode)
Spotify Abcdefghi
21 48 Spotify 6/10
Abcdefghi
*1
ABC
RADIO BASED ON
9999'99"
-9999'99"
Skips tracks forward.
Saves or deletes the current song information to or from "Your Music". Switches between playback and pause.
30
Gives a "Thumbs Down" to the playing track and skips to the next track.
Playback screen 2 (Radio mode)
Spotify Abcdefghi
21 48 Spotify 6/10
Abcdefghi
ABC
RADIO BASED ON
*2
Gives a "Thumbs Up" to the playing track.
Using Spotify with your Pioneer
car audio/video
To enjoy Spotify as you drive, first download the Spotify app to your iPhone or smartphone. You can download it from the iTunes App Store or Google Play. A Premium account gives you more features, like offline listening. If you have Spotify already, please update the app so you have the latest version. Then connect your phone to your car. Now you can take your music on the road.
Important Confirm the requirements to access Spotify using Pioneer
car audio/video. Refer to Setup for iPod / iPhone or smartphone on page
16 To use Spotify, you need to connect to the Internet via 3G,
EDGE, LTE (4G) or a Wi-Fi network. If the data plan for your iPhone or smartphone does not provide for unlimited data usage, additional charges from your carrier may apply.
Starts new radio mode.
*1
Selects a track or station from the list. Refer to Selecting a track or station from the list on
page 31
*2
Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.
Refer to Switching the connected Bluetooth device
on page 13
p By pressing the
or
button, you can also skip
songs forward or backward.
WARNING
Certain uses of an iPhone or a smartphone may not be legal while driving in your jurisdiction, so you must be aware of and obey any such restrictions. If in doubt as to a particular function, only perform it while the car is parked. No feature should be used unless it is safe to do so under the driving conditions you are experiencing.
Limitations: Depending on the availability of the Internet, you may not
be able to receive the Spotify service. The Spotify service is subject to change without notice.
The service could be affected by any of the following: firmware version of the iPhone or smartphone, firmware version of the Spotify application, changes to the Spotify music service. Certain functions of the Spotify service are not available when accessing the service through Pioneer car audio/ video products. Spotify is a music service not affiliated with Pioneer.
Starting procedure
When connecting an iPhone or smartphone to this product, select the method for connecting your device. Settings are required according to the connected device. Refer to Setup for iPod / iPhone or smartphone on page 16
Spotify®
p You can use the Spotify service by connecting an iPhone via USB or Bluetooth.
p When using a smartphone, connect via Bluetooth. Refer to iPhone with 30-pin connector on page 53 Refer to iPhone with Lightning connector on page 52 Refer to Registering your Bluetooth devices on page 12 1 Unlock and connect your device. 2 Display the "System" setting screen.
3 Touch [AV Source Settings]. 4 Confirm that "Spotify" is turned on. 5 Display the "AV source selection" screen.
6 Touch [Spotify] on the AV source selection screen.
Selecting a track or station from the list
1 Touch . The following items are available: Your Music: Selects a track or station from the list of saved
song information. Browse: Selects a track from the category list. Radio: Selects a station from the station list.
Bluetooth audio player
Playback screen 1
Bluetooth Abcdefghi
6/10 21 48
*1
Abcdefghi
ABC
House
9999
9999'99"
-9999'99"
Skips files forward or backward. Track number indicator
Plays files in random order.
Playback screen 2
Bluetooth Abcdefghi
6/10 21 48
Abcdefghi
ABC
House
9999
Sets a repeat play range.
*2
Switches between playback and pause.
*1
Selects a file from the list. Refer to Selecting files from the file name list on
page 32
*2
Switches among the Bluetooth devices when the devices are connected to this product via Bluetooth.
Refer to Switching the connected Bluetooth device
on page 13
p Depending on the Bluetooth audio player connected to this
product, the available operations with this product may be
limited to the following two levels:
-- A2DP (Advanced Audio Distribution Profile): Only playing
back songs on your audio player is possible.
-- A2DP and AVRCP (Audio/Video Remote Control Profile):
Playing back, pausing, selecting songs, etc., are possible.
p By pressing the
or
button, you can also skip files
forward or backward.
p By pressing and hold the
or
button, you can also
perform fast reverse or fast forward.
p Depending on the Bluetooth device connected to this prod-
uct, the available operations with this product may be limited
or differ from the descriptions in this manual.
p While you are listening to songs on your Bluetooth device,
please refrain from operating the phone function as much as
possible. If you try operating, the signal may cause noise for
song playback.
p When you are talking on the Bluetooth device connected to
this product via Bluetooth, it may pause playback.
Starting procedure
p Before using the Bluetooth audio player, register and connect the device to this product. Refer to Registering your Bluetooth devices on page 12
1 Pull out the connecting cable for using AppRadioOne.
p You cannot use Bluetooth device when the connecting cable for using AppRadioOne is connected.
2 Display the "System" setting screen.
3 Touch [AV Source Settings]. 4 Confirm that "Bluetooth Audio" is turned on. 5 Display the "AV source selection" screen.
31
Bluetooth audio player
6 Touch [Bluetooth Audio] on the AV source selection screen.
Selecting files from the file name list
p This function is available only when the AVRCP version of the Bluetooth device is 1.4 or higher.
1 Touch . 2 Touch a file or a folder on the list to play back.
32
SiriusXM® Satellite Radio
Switches between live broadcast mode and ReplayTM mode.
Current channel display
*1
(live broadcast mode)
Sirius XM 1
2
SXM1
6/10 21 48
3
Abcdefghi
*3 4
Abcdefghi Abcdefghi
*4 5 6
CH000
Performs manual
*2
tuning.
Selects a channel directly.
Switches TuneMixTM to on or off. You can use TuneMixTM from each of the music channels stored as presets on the current band.
Recalls the preset channel stored to a key from memory.
HOLD Stores the current broadcast frequency to a key.
Time bar display (ReplayTM mode)
Selects a band.
Sirius XM 1
2
SXM1
6/10 21 48
3
Abcdefghi
4
Abcdefghi Abcdefghi
5
6
9999'99" Pause -9999'99"
Displays the preset channels. Select an item on the list ("1" to "6") to switch to the preset channel.
Switches between playback and pause.
*1
Selects a channel from the list. Refer to Selecting a channel from a list of all chan-
nels on page 33
Refer to Selecting a channel from the category list
on page 33
*2
Activates the Traffic & Weather Now. Refer to Activating the Traffic & Weather Now on
page 34
*3
Stores song information to an iPod. Refer to Storing song information to an iPod
(iTunes Tagging) on page 48
*4
Performs the TuneScan. Refer to Using TuneScanTM on page 33
p By pressing the
or
button, you can also move the
preset channels up or down on the current channel screen,
SiriusXM® Satellite Radio
and skip files forward or backward on the play time indicator
screen.
p By pressing and holding the
or
button, you can
also move channels up or down on the current channel
screen, and perform fast reverse or fast forward on the play
time indicator screen.
p On the Featured Favorites Band, the current broadcast
frequency cannot be stored to a key.
Refer to Using Featured Favorites Band on page 35
p If fewer than two music channels are stored as presets, you
cannot use the TuneMix function.
p "RADIO ID" is displayed when Channel 0 is selected.
SiriusXM tuner operations
Only SiriusXM® brings you more of what you love to listen to, all in one place. Get over 140 channels, including commercial-free music plus the best sports, news, talk, comedy and entertainment. Welcome to the world of satellite radio. A SiriusXM Connect Vehicle Tuner and Subscription are required. To take full advantage of all the SiriusXM capabilities, such as TuneMixTM, SportsFlashTM and Traffic & Weather Now, please use the SXV300 tuner (sold separately). Other tuners are compatible but may limit the features.
Subscribing to the SiriusXM Satellite Radio service
1 Select SiriusXM as the source. You should be able to tune in to Channel 1. If you cannot get Channel 1, ensure that your SiriusXM Connect Vehicle Tuner is installed correctly.
2 Switch to Channel 0 and check the Radio ID. The SiriusXM Radio ID can be found by tuning in to Channel 0. Note that the SiriusXM Radio ID does not include the letters I, O, S or F. You will need this number to activate your subscription.
The activation process usually takes 10 to 15 minutes but may take longer. Do not turn off this product while the activation message is displayed.
Starting procedure
1 Display the "AV source selection" screen.
2 Touch [SiriusXM].
Selecting a channel from a list of all channels
p It may take time to display the channel list depending on the SiriusXM reception condition.
1 Touch . 2 Select the list of all channels. 3 Touch the desired channel.
Selecting a channel from the category list
p The types of categories available depend on the types of channels available.
p It may take time to display the channel list depending on the SiriusXM reception condition.
1 Touch . 2 Touch the category name. 3 Touch the desired channel.
Switching the displayed list
You can switch between list types when a list is displayed. 1 Touch . 2 Touch . The displayed list switches in the following order. Channel Name--Artist Name--Song Title--Content Info
Setting TuneStartTM
Automatically start songs from the beginning when you tune to one of your preset channels in the current preset band when Tune Start is turned on. The default setting is "On".
1 Display the "System" setting screen.
2 Touch [AV Source Settings]. 3 Touch [SiriusXM settings]. 4 Touch [Tune Start] to switch "On" or "Off".
Using TuneScanTM
When you activate the TuneScanTM feature, you will hear a few seconds of the songs, which have not been listened to, from each of the music channels stored as presets on the current band. p When fewer than two music channels are stored as presets,
you cannot perform scan tuning. p TuneScan may take a few minutes to become available after
the unit is turned on or the preset band is changed.
1 Touch .
Sirius XM 1
2
SXM1
6/10 21 48
3
Abcdefghi
4
Abcdefghi Abcdefghi
5
6
Scan
123
1 Continues playing the current scanning song or channel. 2 Skips forward or backward.
Touching skips to the previous song during TuneScan or to the previous channel during category scan. Touching skips to the next song during TuneScan or to the next channel during category scan. 3 Cancels scan play and returns to the previous channel.
33
SiriusXM® Satellite Radio
Using category scan
You can scan each channel in the selected category. 1 Touch . 2 Touch the desired category. 3 Touch .
Using TuneMixTM
When you activate the TuneMix feature, you can select the songs and mix them, from the multiple music channels stored as presets on the current band. When fewer than two music channels are stored as presets,
you cannot perform TuneMix. The Locked Channel cannot be used for the TuneMix until
you clear the password.
1 Touch [TuneMix]. The songs are played from the multiple music channels, and you do not need to switch the channels manually.
Sirius XM 1
2
SXM1
6/10 21 48
3
Abcdefghi
4
Abcdefghi Abcdefghi
5
6
9999'99" Pause -9999'99"
1
1 Skips songs forward or backward.
About SmartFavorites
All preset channels will buffer the content to be used for Replay, TuneStart, TuneScan and TuneMix features.
Using iTunes Tagging
You can store song information to the iPod when this product receives song information. Refer to Storing song information to an iPod (iTunes Tagging)
on page 48 34
Activating the Traffic & Weather Now
Access the latest Traffic & Weather report for your favorite market, whenever you want to hear it.
1 Touch . grayed out: Traffic & Weather broadcast for your market is
not yet available. with green dot: latest report available but not listened to yet. white: latest report available to hear again.
2 Touch the desired city. The latest traffic and weather information is played back.
To cancel the Traffic & Weather Now, touch . p To listen to the information again, touch on the current
channel display. p If you have already selected the city, you can listen to the
information only by touching . p The selected city can be changed. Refer to Selecting the city for Traffic & Weather Now on page
34
Displaying the "SiriusXM settings" screen
1 Press . Refer to Checking part names and functions on page 7
2 Touch , and then [AV Source Settings].
3 Touch [SiriusXM settings].
Selecting the city for Traffic & Weather Now
1 Display the "SiriusXM settings" screen. Refer to Displaying the "SiriusXM settings" screen on page
34
2 Touch [City List].
3 Touch the desired city.
Setting parental lock
The Parental Control feature allows you to limit access to any SiriusXM channels, including those with mature content. When enabled, the Parental Control feature requires you to enter a passcode to tune to the locked channels.
The default passcode is "0000".
Setting the passcode
1 Display the "SiriusXM settings" screen. Refer to Displaying the "SiriusXM settings" screen on page
34
2 Touch [Parental Control].
3 Enter the passcode.
4 Touch [Edit Code].
5 Enter the passcode you want to set, and then touch [Enter]. To delete the entered numbers one by one, touch [C]. The "Locked Channel" screen appears.
Locking the channel
1 Display the "SiriusXM settings" screen. Refer to Displaying the "SiriusXM settings" screen on page
34
2 Touch [Parental Control].
3 Enter the current passcode.
4 Touch the channel. appears and the channel is locked. When you touch the locked channel, the channel is unlocked. When you touch [Clear All], all locked channels are unlocked.
Using SportsFlashTM list
SportsFlash will notify you when a big play happens during a game with one of your favorite sports teams. Choose to tune in and hear the play unfold like it was live. Continue listening to the game, or you can return to your previous channel. The default setting is "On".
1 Display the "SiriusXM settings" screen. Refer to Displaying the "SiriusXM settings" screen on page
34
2 Touch [SportsFlash] to switch "On" or "Off".
SiriusXM® Satellite Radio
Listening to the channel
When a big play happens during a game with one of your favorite sports teams, SportsFlash detects it and displays the pop-up screen.
1 Touch [Play].
Refer to Displaying the "SiriusXM settings" screen on page 34
2 Touch [Featured Favorites] to switch "On" or "Off".
p If the Featured Favorite Band needs to update, the Featured Band Update message will appear.
p The source is turned off and the Bluetooth connection is disconnected before the process starts.
Setting of Favorite Teams
How to access
To display "SportsFlash List" at all times, "SportsFlash" needs to be set to "On".
1 Display the "SiriusXM settings" screen. Refer to Displaying the "SiriusXM settings" screen on page
34
2 Touch [SportsFlash List].
3 Touch [Edit List].
When there is a Featured Favorite, access it with the band key.
1 Touch the band key. SXM1--SXM2--SXM3--FF When there are multiple Featured Favorites, access them from the category list. It is displayed at the bottom of the category list. Refer to Selecting a channel from the category list on page
33
4 Select a league.
5 Select a team.
You can touch an item again to deselect it. If you want to remove all the teams you have set,
touch the [Clear All].
Setting Featured Band Update Message
To display "Featured Band Update Message" at all times, "Featured Favorites" needs to be set to "On". The default setting is "On".
Setting of priorities
If you set many Favorite Teams, up to 5 Favorite teams can be received at once. Set the priorities if more than six teams are set as Favorite Teams.
1 Display the "SiriusXM settings" screen. Refer to Displaying the "SiriusXM settings" screen on page
34
2 Touch [Featured Band Update Message] to switch "On" or "Off".
1 Touch [Prioritize] on the team selection screen. p When there are fewer than six teams, [Prioritize] is not
available.
Restoring the "SiriusXM Settings" to the default
2 Select the high priority five teams from the selected Favorite Teams.
You can restore the SiriusXM settings to the default. p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake.
Using Featured Favorites Band
CAUTION
Featured Favorites are groups of channels that are created by the SiriusXM Programming department allowing you to discover new channels. Featured Favorite channels are dynamic and can change often, allowing you to discover new channels. The default setting is "On".
Do not turn off the engine while restoring the settings.
1 Display the "SiriusXM settings" screen. Refer to Displaying the "SiriusXM settings" screen on page
34
2 Touch [SiriusXM Reset].
1 Display the "SiriusXM settings" screen.
3 Touch [Restore].
The settings are restored to the default.
35
AUX source
AV input
AUX
6/10 21 48
Full
Switches between the video input and the sound input.
p A Mini-jack AV cable (CD-RM10) (sold separately) is required for connection. Refer to External video component and the display on page 54 CAUTION
For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Starting procedure
You can display the video image output by the device connected to video input. 1 Display the "System" setting screen.
Setting the video signal
When you connect this product to an AUX equipment, select the suitable video signal setting. The default setting is "Auto". p You can operate this function only for the video signal input
into the AUX input. 1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting]. 3 Touch [AUX]. 4 Touch the item. The following items are available: Auto, PAL, NTSC, PAL-M, PAL-N, SECAM.
You can display the video image output by the device connected to this product. Refer to External video component and the display on page
54 CAUTION For safety reasons, video images cannot be viewed while your vehicle is in motion. To view video images, stop in a safe place and apply the parking brake.
Starting procedure
You can display the video image output by the device connected to video input. 1 Display the "System" setting screen.
2 Touch [Input/Output settings]. 3 Touch [AV Input].
X490BS Set the setting to "Source".
X390BS Set the setting to "On". 4 Display the "AV source selection" screen.
2 Touch [Input/Output settings]. 3 Confirm that "AUX Input" is turned on. 4 Display the "AV source selection" screen.
5 Touch [AUX]. The image is displayed on the screen. 36
5 Touch [AV]. The image is displayed on the screen.
Setting the video signal
When you connect this product to an AV equipment, select the suitable video signal setting. The default setting is "Auto". p You can operate this function only for the video signal input
into the AV input.
1 Display the "Video Setup" screen.
AV input
2 Touch [Video Signal Setting]. 3 Touch [AV]. 4 Touch the item. The following items are available: Auto, PAL, NTSC, PAL-M, PAL-N, SECAM.
MIXTRAX
Activates the MIXTRAX mode.
(Example: iPod)
iPod Abcdefghi
21 48
6/10
Abcdefghi
Displaying the "MIXTRAX Settings" screen
1 Press . 2 Touch , and then [AV Source Settings]. 3 Touch [MIXTRAX Settings]. The "MIXTRAX Settings" screen appears.
ABC
Pops
9999'99"
-9999'99"
99999/99999
Selects a track.
Switches between playback and pause.
p By pressing the
or
button, you can also skip files
forward or backward.
p By pressing and hold the
or
button, you can also
perform fast reverse or fast forward.
MIXTRAX operation
MIXTRAX is original technology for creating non-stop mixes of selections from your audio library, complete with DJ effects that make them sound.
Setting the playback portion
You can specify the playback portion. The default setting is "60s".
1 Display the "MIXTRAX Settings" screen. Refer to Displaying the "MIXTRAX Settings" screen on page
37
2 Touch [Short Playback Mode].
3 Touch the item. The following items are available: Off, 60s, 90s, 120s, 150s, 180s, Random.
Setting the display effect
You can set the effect display for MIXTRAX. The default setting is "On".
1 Display the "MIXTRAX Settings" screen. Refer to Displaying the "MIXTRAX Settings" screen on page
37
2 Touch [Display Effect] to switch "On" or "Off".
MIXTRAX EZ operation
You can use this unit to play iPod/USB audio files. MIXTRAX EZ is used to add a variety of sound effects between songs for arranging the pauses between songs. It allows you to enjoy listening to music non-stop. This function is only available when a file on a USB storage
device or a song on an iPod is being played. This function is not available when the control mode is set to
App Mode. Depending on the file/song, sound effects may not be
available. Depending on the file/song, non-stop playback may not be
available.
Setting the cut-in effect
You can set the effect tone that sounds when you skip tracks forward or backward. The default setting is "On".
1 Display the "MIXTRAX Settings" screen. Refer to Displaying the "MIXTRAX Settings" screen on page
37
2 Touch [Cut-In Effect] to switch "On" or "Off".
Setting the MIXTRAX effect
You can set and play back the MIXTRAX effect that you want. The default setting is "Standard".
1 Display the "MIXTRAX Settings" screen.
37
MIXTRAX
System settings
Refer to Displaying the "MIXTRAX Settings" screen on page 37
2 Touch [Effect Setting]. 3 Touch the item. The following items are available: Standard, Simple, Custom p When you select "Custom", check the effect that you want.
Setting the flash pattern
The flashing color changes with the changes in the sound and bass levels. 1 Display the "MIXTRAX Settings" screen. Refer to Displaying the "MIXTRAX Settings" screen on page
37 2 Touch [Flash Pattern]. 3 Touch the item. Sound1 (default) to Sound6:
The flash pattern changes according to the sound level. Select a desired mode. L-Pass1 to L-Pass6: The flash pattern changes according to the bass level. Select a desired mode. Random1: The flash pattern changes randomly according to the sound level mode and low pass mode. Random2: The flash pattern changes randomly according to the sound level mode. Random3: The flash pattern changes randomly according to the low pass mode. Off: The flash pattern does not flash.
38
Displaying the "System" setting screen
1 Press . 2 Touch , and then . The "System" setting screen appears.
Setting Bluetooth audio source activation
The default setting is "On". 1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38 2 Touch [AV Source Settings]. 3 Touch [Bluetooth Audio] to switch "On" or
"Off".
Setting Spotify source activation
The default setting is "On". 1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38 2 Touch [AV Source Settings]. 3 Touch [Spotify] to switch "On" or "Off".
Setting the ever scroll
When "Ever Scroll" is set to "On", the recorded text information scrolls continuously in the display while the vehicle is stopped. The default setting is "Off". 1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38 2 Touch [Ever Scroll] to switch "On" or "Off".
Setting the beep tone
The default setting is "On".
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Beep Tone] to switch "On" or "Off".
Setting the auto audio mix function
You can select whether or not to activate the auto audio mix function. If the auto audio mix function is activated, this product automatically switches between mixing or not mixing the AV source sound and the sound output from your iPhone or smartphone according to the mixing property, such as that of the mixed sound or solo sound of the foreground application on your iPhone or smartphone. The default setting is "On".
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Auto Mix] to switch "On" or "Off".
Setting AppRadioOne Sound
You can set where the sound for AppRadioOne is output when it is used with an Android device.
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Input/Output settings].
3 Touch [AppRadioOne Sound].
4 Touch the following settings. AVH (default):
The sound is output from the speakers of this unit. Smartphone:
The sound is output from the speakers of the Android device. p With an iPhone, the sound is always output from the speak-
ers of this unit.
Setting the rear view camera
A separately sold rear view camera (e.g. ND-BC8) is required for utilizing the rear view camera function. (For details, consult your dealer.)
System settings
Rear view camera This product features a function that automatically switches to the full-screen image of the rear view camera installed on your vehicle, when the shift lever is in the REVERSE (R) position. Camera View mode also allows you to check what is behind you while driving.
Camera for Camera View mode Camera View can be displayed at all times. Please note that with this setting, the camera image is not resized to fit, and that a portion of what is seen by the camera is not viewable. To display the camera image, touch [Camera View] on the "AV source selection" screen. Refer to Source on the AV source selection screen on page
11 p To set the rear view camera as the camera for Camera View
mode, set "Back Camera Input" to "On". Refer to Setting rear view camera activation on page 39 p When the camera view of both the rear view camera and 2nd
camera are available, the key to switch the display appears. Touch this key to switch the display between the rear view image and 2nd camera image.
CAUTION
Pioneer recommends the use of a camera which outputs mirror reversed images, otherwise the screen image may appear reversed.
p Immediately verify whether the display changes to a rear view camera image when the shift lever is moved to REVERSE (R) from another position.
p When the screen changes to full-screen rear view camera image during normal driving, switch to the opposite setting in "Camera Polarity".
p If you touch while the camera image is displayed, the displayed image will turn off temporarily.
Setting rear view camera activation
The default setting is "Off".
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Camera settings].
3 Touch [Back Camera Input] to switch "On" or "Off".
Setting the polarity of the rear view camera
p This function is available when "Back Camera Input" is "On".
Refer to Setting rear view camera activation on page 39
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Camera settings].
3 Touch [Camera Polarity]. Battery (default):
The polarity of the connected lead is positive. Ground:
The polarity of the connected lead is negative.
Setting the demo mode
The default setting is "On".
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Demo Mode] to switch "On" or "Off".
Selecting the system language
If the embedded language and the selected language setting are not the same, text information may not display properly.
Some characters may not be displayed properly.
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [System Language].
3 Touch the language. After the language is selected, the previous screen returns.
Setting the keyboard language with the application for iPhone
You can use the keyboard in AppRadioOne by setting the language of the keyboard for iPhone. p This function is only available in AppRadioOne on the
iPhone.
1 Display the "System" setting screen.
Refer to Displaying the "System" setting screen on page 38
2 Touch [Keyboard].
3 Touch the language. After the language is selected, the previous screen returns.
Adjusting the response positions of the touch panel (touch panel calibration)
If you feel that the touch panel keys on the screen deviate from the actual positions that respond to your touch, adjust the response positions of the touch panel screen. p This setting is available only when you stop your vehicle in a
safe place and apply the parking brake. p Do not use sharp pointed tools such as a ballpoint or
mechanical pen, which could damage the screen. p Do not turn off the engine while saving the adjusted position
data.
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Touch panel calibration].
3 Touch [Yes].
4 Touch two corners of the screen along the arrows, and then touch the centers of two + marks at the same time twice.
5 Press . The adjustment results are saved.
6 Press once again. Proceed to 16-point adjustment.
7 Gently touch the center of the "+" mark displayed on the screen.
The target indicates the order.
When you press , the previous adjustment position returns.
When you press and hold , the adjustment is canceled.
8 Press and hold . The adjustment results are saved.
39
System settings
Setting the dimmer
Setting the dimmer trigger
p This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Dimmer Settings].
3 Touch [Dimmer Trigger].
4 Touch the item. Auto (default):
Switches the dimmer to on or off automatically according to your vehicle's headlight turning on or off. Manual: Switches the dimmer to on or off manually. Time: Switches the dimmer to on or off at the time you adjusted.
Setting the dimmer duration in day or night
p You can use this function when "Dimmer Trigger" is set to "Manual".
p This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Dimmer Settings].
3 Touch [Day/Night] to switch the following items.
Day (default): Turns the dimmer manually to off.
Night: Turns the dimmer manually to on.
Setting the dimmer duration optional
You can adjust the time that the dimmer is turned on or off. p You can use this function when "Dimmer Trigger" is set to
"Time".
40
p This setting is available only when you stop your vehicle in a safe place and apply the parking brake.
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [Dimmer Settings].
3 Touch [Dimmer Duration]. The "Duration Setting" screen appears.
4 Drag the cursors to set the dimmer duration.
You can also set the dimmer duration touching or .
Each touch of or moves the cursor backward or forward in the 15 minute width. p The default setting is 18:00-6:00 (6:00 PM-6:00 AM). p When the cursors are placed on the same point, the dimmer available time is 0 hours. p When the cursor for off time setting is placed on the left end and the cursor for on time setting is placed on the right end, the dimmer available time is 0 hours. p When the cursor for on time setting is placed on the left end and the cursor for off time setting is placed on the right end, the dimmer available time is 24 hours. p The time display of the dimmer duration adjusting bar is depending on the clock display setting. Refer to Setting the time and date on page 48
Adjusting the picture
You can adjust the picture for each source and rear view camera.
CAUTION For safety reasons, you cannot use some of these functions while your vehicle is in motion. To enable these functions, you must stop in a safe place and apply the parking brake.
1 Display the screen you wish to adjust.
2 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
3 Touch [Picture Adjustment].
4 Touch the item to select the function to be adjusted.
Brightness: Adjusts the black intensity. (24 to +24)
Contrast: Adjusts the contrast. (24 to +24)
Color: Adjusts the color saturation. (24 to +24)
Hue: Adjusts the tone of color (which color is emphasized, red or green). (24 to +24)
Dimmer: Adjusts the brightness of the display. (+1 to +48)
Temperature: Adjusts the color temperature, resulting in a better white balance. (3 to +3)
p With some pictures, you cannot adjust Hue and Color.
When you touch [Rear View] or [2nd Camera], the mode changes to the selected camera mode. By touching [Source], [Navi] or [Apps], you can return to the selected mode.
5 Touch , , , to adjust. p The adjustments of "Brightness", "Contrast" and "Dimmer"
are stored separately when your vehicle's headlights are off (daytime) and on (nighttime). p "Brightness" and "Contrast" are switched automatically depending on whether the vehicle's headlights are on or off. p "Dimmer" can be changed the setting or the time to switch it to on or off. Refer to Setting the dimmer on page 40 p The picture adjustment may not be available with some rear view cameras. p The setting contents can be memorized separately.
Displaying the firmware
version
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [System Information].
3 Touch [Firmware Information]. The "Firmware Information" screen appears.
Displaying the open source
licenses
1 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
2 Touch [System Information].
System settings
Audio adjustments
3 Touch [License]. The open source licenses of the functions that this product is equipped with appear.
Updating firmware
CAUTION The USB storage device for updating must contain only the
correct update file. Never turn this product off, disconnect the USB storage
device while the firmware is being updated. You can only update the firmware when the vehicle is
stopped and the parking brake is engaged.
1 Download the firmware update files.
2 Connect a blank (formatted) USB storage device to your computer, and then locate the correct update file and copy it onto the USB storage device.
3 Connect the USB storage device to this product.
4 Turn the source off. Refer to Selecting a source on page 11
5 Display the "System" setting screen. Refer to Displaying the "System" setting screen on page
38
6 Touch [System Information].
7 Touch [Firmware Update].
8 Touch [Continue] to display the data transfer mode.
p Follow the on-screen instructions to finish updating the firmware.
p This product will reset automatically after the firmware update is completed if the update is successful.
p If an error message appears on the screen, touch the display and perform the above steps again.
Displaying the "Audio" setting screen
1 Press .
2 Touch , and then . The "Audio" setting screen appears.
Using fader/balance adjustment
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Fader/Balance]. p Only the balance can be adjusted when "Network Mode" is
selected as the speaker mode. Touch [Balance] and skip to step 4.
3 Touch or to adjust the front/rear speaker balance.
p Set "Front" and "Rear" to "0" when using a dual speaker system.
4 Touch or to adjust the left/right speaker balance.
You can also set the value by dragging the point on the displayed table.
Switching sound muting/ attenuation
You can automatically mute or attenuate the AV source volume and the iPhone application volume when the navigation outputs the guidance voice.
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Mute Level].
3 Touch the item. ATT (default):
The volume becomes 20 dB lower than the current volume. Mute:
The volume becomes 0. Off:
The volume does not change.
Adjusting source levels
SLA (source level adjustment) lets you adjust the volume level of each source to prevent radical changes in volume when switching between sources. p Settings are based on the FM tuner volume level, which
remains unchanged. p This function is not available when the FM tuner is selected
as the AV source.
1 Compare the FM tuner volume level with the level of the source.
2 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
3 Touch [Source Level Adjuster].
4 Touch or to adjust the source volume. p If you directly touch the area where the cursor can be moved,
the SLA setting will be changed to the value of the touched point. p "+4" to "4" is displayed as the source volume is increased or decreased. p The default setting is "0".
Using the auto level control
This function corrects automatically the audio level difference between the music files or the sources.
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Automatic Level Control].
3 Touch the item. Off (default):
Turns the auto level control setting off. Mode1:
Corrects a little the audio level difference between the music files or the sources (for the narrow dynamic range audio signal). Mode2: Corrects widely the audio level difference between the music files or the sources (for the wide dynamic range audio signal).
Adjusting loudness
This function compensates for deficiencies in the low-frequency and high-frequency ranges at low volume. The default setting is "Off".
41
Audio adjustments
p This function is not available while you make or receive a call using the hands-free function.
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Loudness].
3 Touch the item. The following items are available: Off, Low, Mid, High.
Setting the subwoofer output
This product is equipped with a subwoofer output mechanism, which can be turned on or off. The default setting is "On".
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Subwoofer] to switch "On" or "Off".
Adjusting the cutoff frequency value
You can adjust the cutoff frequency value of each speaker. The following speakers can be adjusted: Standard Mode: Front, Rear, Subwoofer. Network Mode: High, Mid, Subwoofer. p "Subwoofer Settings" is available only when "Subwoofer"
is "On". Refer to Setting the subwoofer output on page 42
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Crossover] or [Subwoofer Settings].
3 Touch or to switch the speaker.
4 Drag the graph line to set the cutoff position.
5 Drag the lowest point of the graph to set the
cutoff slope.
p The following items can also be set.
:
Switches the subwoofer phase between normal and reverse
position.
LPF/HPF:
Switches the LPF/HPF setting to "On" or "Off".
When it is turned off, the high-pass filter or low-pass filter of
each speaker can also be turned on by touching the graph
lines. 42
p This function is not available when adjusting the High speaker.
Switching the rear speaker output
p This function is available when "Standard Mode" is selected as the speaker mode.
The default setting is "Rear".
1 Turn the source off. Refer to Selecting a source on page 11 2 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41 3 Touch [Rear Speaker Output]. 4 Touch to switch "Rear" or "Subwoofer".
Using BASS Boost
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41 2 Touch [BASS Boost]. 3 Touch to select the bass boost level from 0 to
+6.
Selecting the listening position
You can select a listening position that you want to make as the center of sound effects. The default setting is "Off".
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41 2 Touch [Listening Position]. 3 Touch the desired position to change the lis-
tening position. The following items are available: Off, Front-L, Front-R, Front, All. p "All" is not available when "Network Mode" is selected as
the speaker mode.
Adjusting the speaker output
levels finely
Fine adjustments of the speaker output level can be made by listening to audio output. p This function is available when "Subwoofer" is set to "On". Refer to Setting the subwoofer output on page 42
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Speaker Level].
3 Touch or to select the listening position if necessary.
The following items are available: Off, Front-L, Front-R, Front, All. p The default setting is "Off". p "All" is not available when "Network Mode" is selected as
the speaker mode. p If you change the listening position setting, the output
levels of all the speakers will change in conjunction with the setting.
4 Touch or to adjust the speaker output level.
p "24" dB to "10" dB is displayed as the level to be corrected is increased or decreased.
The following speakers are available: Standard Mode: Front Left, Front Right, Rear Left, Rear Right, Subwoofer Network Mode: High Left, High Right, Mid Left, Mid Right, Subwoofer p To use this function, the vehicle's acoustics must be mea-
sured in advance.
Adjusting the time alignment
By adjusting the distance from each speaker to the listening position, time alignment is able to correct the time required for sound to reach the listening position.
1 Measure the distance between the head of the listener and each speaker unit.
2 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
3 Touch [Time Alignment].
4 Touch or to select the listening position if necessary.
The following items are available:
Audio adjustments
Off, Front-L, Front-R, Front, All. p The default setting is "Off". p "All" is not available when "Network Mode" is selected as
the speaker mode. p If you change the listening position setting, the output
levels of all the speakers will change in conjunction with the setting.
5 Touch or to input the distance between the selected speaker and the listening position.
p You can input the value between 0 and 140 inch. The following speakers are available: Standard Mode: Front Left, Front Right, Rear Left, Rear Right, Subwoofer Network Mode: High Left, High Right, Mid Left, Mid Right, Subwoofer p This function is available only when the listening position
setting is set to "Front-L" or "Front-R". p To use this function, the vehicle's acoustics must be mea-
sured in advance.
If you touch [TA On], the time alignment is turned off mandatorily.
Switching the time alignment
preset
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Time Alignment Preset].
3 Touch the item. Initial (default):
Sets to the initial setting value. ATA:
Reflects the result of "A-EQ&TA Measurement" to the setting value. Off: Resets all setting values to 0. Custom: Sets to the value adjusted at "Time Alignment". p When you adjust the time alignment, the preset item will switch automatically to "Custom". p "Custom" can be selected only when the listening position is set to "Front-L" or "Front-R".
Using the equalizer
Recalling equalizer curves
There are seven stored equalizer curves that you can easily recall at any time. Here is a list of the equalizer curves: S.Bass is a curve in which only low-pitched sound is boosted. Powerful is a curve in which low- and high-pitched sounds
are boosted. Natural is a curve in which low- and high-pitched sounds
are slightly boosted. Vocal is a curve in which the midrange, which is the human
vocal range, is boosted. Flat is a flat curve in which nothing is boosted. Custom1 is an adjusted equalizer curve that you create. If
you select this curve, the effect is applied to all AV sources. Custom2 is an adjusted equalizer curve that you create. If
you select this curve, the effect is applied to all AV sources. p The default setting is "Powerful".
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Graphic EQ].
3 Touch the equalizer.
Customizing the equalizer curves
You can adjust the currently selected equalizer curve setting as desired. Adjustments can be made with a 13-band graphic equalizer. p If you make adjustments when a curve "S.Bass", "Powerful",
"Natural", "Vocal", or "Flat" is selected, the equalizer curve settings will be changed to "Custom1" mandatorily. p If you make adjustments when the "Custom2" curve is selected for example, the "Custom2" curve will be updated. p "Custom1" and "Custom2" curves can be created common to all sources.
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Graphic EQ].
3 Select a curve that you want to use as the basis of customizing.
4 Touch the frequency for which you want to adjust the level.
p If you trail a finger across the bars of multiple equalizer bands, the equalizer curve settings will be set to the value of the touched point on each bar.
Setting the auto-adjusted equalizer
You can set the auto-adjusted equalizer to suit the vehicle's acoustics. To use this function, the vehicle's acoustics must be measured in advance. The default setting is "Off". Refer to Adjusting the equalizer curve automatically (Auto EQ)
on page 43 p To manually adjust the equalizer curve, set "Auto EQ&TA" to
"Off".
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch "[Auto EQ&TA] to switch "On" or "Off".
Adjusting the equalizer curve automatically (Auto EQ)
By measuring the vehicle's acoustics, the equalizer curve can be adjusted automatically to suit the vehicle interior.
WARNING A loud tone (noise) may be emitted from the speakers when measuring the vehicle's acoustics. Never perform Auto EQ measurement while driving.
CAUTION Thoroughly check the conditions before performing Auto
EQ, as the speakers may be damaged if this is performed under the following conditions: When the speakers are incorrectly connected. (For exam-
ple, when a rear speaker is connected as a subwoofer output.) When a speaker is connected to a power amp delivering output higher than the speaker's maximum input power capability. If a microphone for acoustical measurement (sold separately) is not placed in an appropriate location, the measurement tone may become loud and measurement may take a long time, resulting in battery drainage. Be sure to place the microphone in the specified location.
Before operating the Auto EQ function
Perform Auto EQ in as quiet a place as possible, with the vehicle engine and air conditioning switched off. Also, cut power to car phones or cellular phones in the vehicle, or
43
Audio adjustments
remove them in advance. Surrounding sounds may prevent correct measurement of the vehicle's acoustics. Be sure to use the microphone for acoustical measurement (sold separately). Using another microphone may prevent measurement, or result in incorrect measurement of the vehicle's acoustics. To perform Auto EQ, the front speakers must be connected. When this product is connected to a power amp with input level control, Auto EQ may be impossible if the power amp's input level is set below the standard level. When this product is connected to a power amp with an LPF (low pass filter), turn the LPF off before performing Auto EQ. Also, set the cut-off frequency for the built-in LPF of an active subwoofer to the highest frequency. The distance has been calculated by a computer to provide optimum delay to ensure accurate results. Do not change this value. -- The reflected sound within the vehicle is strong and delays
occur. -- The LPF on active subwoofers or external amps delay the
lower sounds. If an error occurs during measurement, check the following
before measuring the vehicle's acoustics. -- Front speakers (left/right) -- Rear speakers (left/right) -- Noise -- Microphone for acoustical measurement (sold separately) -- Low battery
Performing Auto EQ
p Auto EQ changes the audio settings as follows: -- The fader/balance settings return to the center position.
Refer to Using fader/balance adjustment on page 41 -- "Mute Level" is set to "Off".
Refer to Switching sound muting/attenuation on page 41 p Previous settings for Auto EQ will be overwritten.
CAUTION
Do not turn off the engine while the measurement is in progress.
1 Stop the vehicle in a quiet place, close all the doors, windows and sun roof, and then turn the engine off.
If the engine is left running, engine noise may prevent correct Auto EQ. p If driving restrictions are detected during measurement,
measurement is canceled.
2 Fix the microphone for acoustical measurement (sold separately) in the center of the headrest of the driver's seat, facing forward.
The Auto EQ may differ depending on where you place the microphone. If desired, place the microphone on the front passenger seat and perform Auto EQ.
3 Disconnect the iPhone or smartphone device.
4 Turn on the ignition switch (ACC ON). If the vehicle's air conditioner or heater is turned on, turn it off.
5 Switch the AV source to "Source OFF". Refer to Selecting a source on page 11
6 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
7 Touch [A-EQ&TA Measurement]. The "A-EQ&TA Measurement" screen appears.
8 Connect the microphone for acoustical measurement (sold separately) with this product.
Plug the microphone into the AUX input jack on this product. Use an extension cable (sold separately) if the cord of the Microphone (sold separately) is not long enough.
9 Touch [Front Left] or [Front Right] to select the current listening position.
10 Touch [Start]. A 10-second countdown starts. p The Bluetooth connection is disconnected before the pro-
cess starts.
11 Exit the vehicle and keep the doors closed until the countdown finishes.
When the countdown finishes, a measurement tone (noise) is emitted from the speakers and the Auto EQ measurement begins.
12 Wait until the measurement is completed. When Auto EQ is completed, a message is displayed. p The measurement time varies depending on the type of
vehicle.
To stop the measurement, touch [Stop].
13 Store the microphone carefully in the glove compartment or another safe place.
If the microphone is subjected to direct sunlight for an extended period, high temperatures may cause distortion, color change or malfunction.
Saving the sound settings
You can save to recall the following current sound settings: bass boost, slope, subwoofer phase, speaker level, Graphic EQ, HPF/LPF, listening position, crossover, time alignment.
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Save Settings].
3 Touch [OK]. All of the current sound settings are saved.
When you touch [Cancel], return to the "Audio" setting screen.
Loading the sound settings
1 Display the "Audio" setting screen. Refer to Displaying the "Audio" setting screen on page 41
2 Touch [Load Settings].
3 Touch the item. The following items are available: AEQ Setting,Sound Setting. p "AEQ Setting" is available only when you have already
performed Auto EQ measurement. Refer to Adjusting the equalizer curve automatically (Auto EQ)
on page 43 p "Sound Setting" is available only when you have already
saved the sound settings. Refer to Saving the sound settings on page 44
44
Theme menu
Selecting the background
display
The background display can be selected from 9 different preset displays for the AV operation screen and 6 different preset displays for the Top menu screen. Furthermore, you can change the background display to other images imported from an USB storage device.
1 Display the "Theme" screen.
2 Touch [Background].
3 Touch [Home] or [AV] to switch the screen displays.
The setting contents can be memorized separately for the AV operation screen and the Top menu screen.
4 Touch the item.
Preset displays: Selects the desired preset background
display.
(custom): Displays the background display image
imported from the USB storage device.
Refer to Saving the image as the wallpaper on page 24
(off): Hides the background display.
Setting the illumination color
The illumination color can be selected from 7 different colors. Furthermore, the illumination can be switched between these 7 colors in order.
Selecting the color from the preset colors
You can select an illumination color from the color list. 1 Display the "Theme" screen.
2 Touch [Illumination].
3 Touch the color you want.
Colored keys: Selects the desired preset color.
(custom): Displays the screen to customize the illumina-
tion color.
Refer to Creating a user-defined color on page 45
(rainbow): Shifts gradually between the five default
colors in sequence.
You can preview the Top menu screen or the AV operation screen by touching [Home] or [AV] respectively.
Creating a user-defined color
You can create a user-defined color. The created color is stored, and you can select the color when setting the illumination color the next time.
1 Display the "Theme" screen.
2 Touch [Illumination]. 3 Touch the following key.
Displays the screen to create a user-defined color and store it to memory.
4 Touch the following keys.
Adjusts the brightness and the level of red, green and blue to create a favorite color.
Selecting the theme color
A theme color can be selected from 5 different colors. 1 Display the "Theme" screen.
2 Touch [Theme]. 3 Touch the color you want. You can preview the Top menu screen or the AV
operation screen by touching [Home] or [AV] respectively.
Selecting the clock image
The clock on the AV operation screen and the Top menu screen can be selected from 3 different images. 1 Display the "Theme" screen.
2 Touch [Clock].
3 Touch the item.
Preset images: Selects the desired preset clock image.
(off): Hides the clock display.
You can also adjust the color tone by dragging the color bar.
5 Touch and hold [Memo] to store the customized color in the memory.
The customized color is stored in the memory. The set color will be recalled from the memory the next time you touch the same key.
45
Setting up the video player
Setting the top-priority languages
You can assign the top-priority language to the top-priority subtitle, audio and menu in initial playback. If the selected language is recorded on the disc, subtitles, audio and menu are displayed or output in that language. p This setting is available when the selected source is "Disc",
"CD", "Video CD" or "DVD".
Setting the language
You can set a language preference. When available, the subtitles, audio or menu will be provided in the selected language. 1 Display the "Video Setup" screen.
2 Touch [DVD/DivX Setup]. 3 Touch [Subtitle Language], [Audio Language]
or [Menu Language]. The pop-up menu appears. 4 Touch the desired language. When you select "Others", a language code input screen is shown. Input the four-digit code of the desired language then touch . p If the selected language is not available, the language speci-
fied on the disc is displayed. p You can also switch the language by touching the switch
languages key during playback. p The setting made here will not be affected even if the lan-
guage is switched during playback using the appropriate key.
Setting the angle icon display
The angle icon can be set so it appears on scenes where the angle can be switched. p This setting is available when the selected source is "Disc",
"CD", "Video CD" or "DVD". 1 Display the "Video Setup" screen.
46
2 Touch [DVD/DivX Setup].
3 Touch [Multi Angle] repeatedly until the desired setting appears.
On (default): Turns the multi-angle setting on. Off: Turns the multi-angle setting off.
Setting the aspect ratio
There are two kinds of displays. A wide screen display has a width-to-height ratio (TV aspect) of 16:9, while a regular display has a TV aspect of 4:3. If you use a regular rear display with a TV aspect of 4:3, you can set the aspect ratio suitable for your rear display. (We recommend use of this function only when you want to fit the aspect ratio to the rear display.) p When using a regular display, select either "Letter Box"
or "Pan Scan". Selecting "16:9" may result in an unnatural image. p If you select the TV aspect ratio, this product's display will change to the same setting. p This setting is available when the selected source is "Disc", "CD", "Video CD" or "DVD".
1 Display the "Video Setup" screen.
2 Touch [DVD/DivX Setup].
3 Touch [TV Aspect]. The pop-up menu appears.
4 Touch the item.
16:9 (default): Displays the wide screen image (16:9) as it is
(initial setting).
Letter Box: Makes the image in the shape of a letterbox with
black bands on the top and bottom of the screen.
Pan Scan: Cuts the image short on the right and left sides of
the screen.
p When playing discs that do not have a panscan system, the
disc is played back with "Letter Box" even if you select the
"Pan Scan" setting. Confirm whether the disc package bears
the
mark.
p The TV aspect ratio cannot be changed for some discs. For details, refer to the disc's instructions.
Setting parental lock
Some DVD-Video discs let you use parental lock to set restrictions so that children cannot watch violent or adult-oriented scenes. You can set the parental lock level in steps as desired. p When you set a parental lock level and then play a disc fea-
turing parental lock, code number input indications may be displayed. In this case, playback will begin when the correct code number is input. p This setting is available when the selected source is "Disc", "CD", "Video CD" or "DVD".
Setting the code number and level
When you first use this function, register your code number. If you do not register a code number, the parental lock will not operate. 1 Display the "Video Setup" screen.
2 Touch [DVD/DivX Setup]. 3 Touch [Parental]. The "Parental" screen appears. 4 Touch [0] to [9] to input a four-digit code
number. 5 Touch the following key.
Registers the code number, and you can now set the level.
6 Touch any number between [1] to [8] to select the desired level.
[8]: Enables playback of the entire disc (initial setting). [7] to [2]: Enables playback of discs for children and non-
adult oriented discs. [1]: Enables only playback of discs for children. 7 Touch the following key.
Sets the parental lock level.
Setting up the video player
p We recommend to keep a record of your code number in case you forget it.
p The parental lock level is recorded on the disc. You can confirm it by looking at the disc package, the included literature or the disc itself. You cannot use parental lock with discs that do not feature a recorded parental lock level.
p With some discs, parental lock operates to skip certain scenes only, after which normal playback resumes. For details, refer to the disc's instructions.
Displaying your DivX VOD reg-
istration code
If you want to play DivX® VOD (video on demand) content on this product, you must first register this product with your DivX VOD content provider. You do this by generating a DivX VOD registration code, which you submit to your provider. p Keep a record of the code as you will need it when you
register this product to the DivX VOD provider. p This setting is available when the selected source is "Disc",
"CD", "Video CD" or "DVD".
1 Display the "Video Setup" screen.
2 Touch [DVD/DivX Setup].
3 Touch [DivX® VOD]. The "DivX® VOD" screen appears.
4 Touch [Deregistration Code]. Your 8-digit deregistration code is displayed. p Make a note of the code as you will need it when you deregis-
ter from a DivX VOD provider.
Automatic playback of DVDs
When a DVD disc with a DVD menu is inserted, this product will cancel the menu automatically and start playback from the first chapter of the first title. p Some DVDs may not operate properly. If this function is not
fully operable, turn this function off and start playback. p This setting is available when the selected source is "Disc",
"CD", "Video CD" or "DVD".
1 Display the "Video Setup" screen.
2 Touch [Video Signal Setting].
3 Touch [Camera]. The pop-up menu appears.
4 Touch the item. Auto (default): Adjusts the video signal setting
automatically. PAL: Sets the video signal to PAL. NTSC: Sets the video signal to NTSC. PAL-M: Sets the video signal to PAL-M. PAL-N: Sets the video signal to PAL-N. SECAM: Sets the video signal to SECAM.
2 Touch [DVD/DivX Setup].
3 Touch [DivX® VOD]. The "DivX® VOD" screen appears. p If a registration code has already been activated, it cannot be
displayed.
4 Touch [Registration Code]. Your 10-digit registration code is displayed. p Make a note of the code as you will need it when you deregis-
ter from a DivX VOD provider.
2 Touch [DVD/DivX Setup]. 3 Touch [DVD Auto Play] repeatedly until the
desired setting appears. Off (default): Turns the DVD Auto Play setting off On: Turns the DVD Auto Play setting on
Setting the video signal for the
Displaying your DivX VOD
deregistration code
A registration code registered with a deregistration code can be deleted. p This setting is available when the selected source is "Disc",
"CD", "Video CD" or "DVD".
rear view camera
When you connect a rear view camera to this product, select the suitable video signal setting. p You can operate this function only for the video signal input
into the AV input.
1 Display the "Video Setup" screen.
1 Display the "Video Setup" screen.
47
Favorite menu
Common operations
Registering your favorite menu items in shortcuts allows you to quickly jump to the registered menu screen by a simple touch on the "Favorites" screen. p Up to 12 menu items can be registered in the favorite menu.
Creating a shortcut
1 Display the "Settings" screen.
1
Radio 1
6/10 21 48
2
FM1 AM
3
Abcdefghi
4
Abcdefghi Abcdefghi
5
2
6
000.0 MHz
2 Touch the star icon of the menu item. The star icon for the selected menu is filled in. To cancel the registration, touch the star icon in
the menu column again.
Selecting a shortcut
1 Display the "Favorites" screen.
CD
Abcdefghi
6/10 21 48
04
3
2 Touch the desired menu item.
Removing a shortcut
1 Display the "Favorites" screen.
2 Touch the favorite menu column. The selected menu item is removed from the "Favorites" screen. You can also remove a shortcut by touching the
star icon in the registered menu column.
48
AV
6/10 21 48
Full
4
1 Clock display Displays the time and date setting screen Refer to Setting the time and date on page 48
2 Song information Performs the iTunes Tagging Refer to Storing song information to an iPod (iTunes Tagging) on page 48
3 S.Rtrv key Switches the sound retriever setting Refer to Setting the "Sound Retriever" function on page 49
4 Screen display mode key
Changes the wide screen mode Refer to Changing the wide screen mode on page 49
Setting the time and date
1 Touch the current time on the screen.
2 Touch or to set the correct time and date.
You can operate the following items: Year, month, date, hour, minute. p You can change the time display format to "12hour" (default)
or "24hour". p You can change the order of date display format: Day-month-
year, Month-day-year, Year-month-date.
Storing song information to an iPod (iTunes Tagging)
You can store song information to the iPod when this product receives song information. The songs will appear in a playlist called "Tagged playlist" in iTunes the next time you synchronize your iPod. You can directly buy the songs via this product. p The iTunes Tagging function is available while digital broad-
casts are being received. p This function is available for the following iPod models:
iPhone 3G, 3GS, 4, 4s, 5, 5c, 5s, 6, 6 Plus iPod touch 1st, 2nd, 3rd, 4th, 5th generation iPod classic 1st, 2nd generation iPod nano 3rd, 4th, 5th, 6th generation p The version of iTunes must be 7.4 or higher.
1 Tune into the broadcast station. Radio
Refer to Radio on page 18 SiriusXM
Refer to SiriusXM® Satellite Radio on page 32
2 Touch the song information.
Radio
The song title or artist name
SiriusXM
The artist name, song title, category name or content text
The information on the song on air is stored in this product.
When the information is acquired,
turns off and is
displayed.
p The song information for up to 50 songs can be stored in this
product.
Common operations
Other functions
3 Connect your iPod. The song information is transferred to your iPod. p When your iPod is already connected, the song information
will be transferred directly to your iPod every time you touch the song information. p When the song information transfer is completed, the information stored in this product will be automatically deleted. p If you turn off this product or disconnect the iPod while transferring song information, the transfer may not successfully complete. p While this product is storing song information, transfer to an iPod is not possible.
Setting the "Sound Retriever"
function
The "Sound Retriever" function automatically enhances compressed audio and restores rich sound.
1 Touch
to switch the settings.
(Mode1) (default),
(Mode2): Activates the
"Sound Retriever" function.
(Off): Deactivates the "Sound Retriever" function.
p Mode2 has a stronger effect than Mode1.
Changing the wide screen
mode
You can set the screen size for the video and JPEG images. p The default setting is "Full", and for JPEG images is
"Normal". p JPEG can be set to either "Normal" or "Trimming" in wide
screen mode.
1 Touch the screen display mode key. p The appearance of this key changes according to the current
setting.
2 Touch the desired mode. Full:
A 4:3 picture is enlarged in the horizontal direction only, enabling you to enjoy an image without any omissions. Zoom: A 4:3 picture is enlarged in the same proportion both vertically and horizontally. Normal: A 4:3 picture is displayed normally, without changing its proportion. Trimming
An image is displayed across the entire screen with the horizontal-to-vertical ratio left as is. If the screen ratio differs from the image, the image may be displayed partly cut off either at the top/bottom or sides. p This setting is for JPEG images only. p You cannot operate this function while driving. p Different settings can be stored for each video source. p When a video is viewed in a wide screen mode that does not match its original aspect ratio, it may appear different. p The video image will appear coarser when viewed in "Zoom" mode.
Restoring this product to the default settings
You can restore settings or recorded content to the default settings. Various methods are used to clear user data. Method 1: Remove the vehicle battery Resets various settings registered to this product. p The settings configured on the "Theme" screen are not
reset. Method 2: Restore the default settings from the "System" menu Method 3: Press the RESET button Refer to Resetting the microprocessor on page 6
Restoring the default settings
p This setting is available only when you stop your vehicle in a safe place and apply the parking brake. CAUTION
Do not turn off the engine while restoring the settings. 1 Display the "System" setting screen.
2 Touch [Restore Settings]. A message confirming whether to initialize the settings appears. 3 Touch [Restore]. p The source is turned off and the Bluetooth connection is
disconnected before the process starts.
49
Connection
Precautions
Your new product and this manual
Do not operate this product, any applications, or the rear
view camera option (if purchased) if doing so will divert your
attention in any way from the safe operation of your vehicle.
Always observe safe driving rules and follow all existing
traffic regulations. If you experience difficulty in operating
this product or reading the display, park your vehicle in a
safe location and apply the parking brake before making the
necessary adjustments.
Do not install this product where it may
(i) obstruct the driver's vision,
(ii) impair the performance of any of the vehicle's operating
systems of safety features, including airbags, hazard lamp
buttons, or
(iii) impair the driver's ability to safely operate the vehicle.
In some cases, it may not be possible to install this product
because of the vehicle type or the shape of the vehicle
interior.
The graphical symbol
placed on the product means
direct current.
Important safeguards
WARNING
Pioneer does not recommend that you install this product yourself. This product is designed for professional installation only. We recommend that only authorized Pioneer service personnel, who have special training and experience in mobile electronics, set up and install this product. NEVER SERVICE THIS PRODUCT YOURSELF. Installing or servicing this product and its connecting cables may expose you to the risk of electric shock or other hazards, and can cause damage to this product that is not covered by warranty.
Precautions before connecting the system
WARNING
Do not take any steps to tamper with or disable the parking brake interlock system which is in place for your protection. Tampering with or disabling the parking brake interlock system could result in serious injury or 50 death.
CAUTION
Secure all wiring with cable clamps or electrical tape. Do not allow any bare wiring to remain exposed.
Do not directly connect the yellow lead of this product to the vehicle battery. If the lead is directly connected to the battery, engine vibration may eventually cause the insulation to fail at the point where the wire passes from the passenger compartment into the engine compartment. If the yellow lead's insulation tears as a result of contact with metal parts, shortcircuiting can occur, resulting in considerable danger.
It is extremely dangerous to allow cables to become wound around the steering column or shift lever. Be sure to install this product, its cables, and wiring away in such so that they will not obstruct or hinder driving.
Make sure that the cables and wires will not interfere with or become caught in any of the vehicle's moving parts, especially the steering wheel, shift lever, parking brake, sliding seat tracks, doors, or any of the vehicle's controls.
Do not route wires where they will be exposed to high temperatures. If the insulation heats up, wires may become damaged, resulting in a short circuit or malfunction and permanent damage to the product.
Do not shorten any leads. If you do, the protection circuit (fuse holder, fuse resistor or filter, etc.) may fail to work properly.
Never feed power to other electronic products by cutting the insulation of the power supply lead of this product and tapping into the lead. The current capacity of the lead will be exceeded, causing overheating.
Before installing this product
Use this unit with a 12-volt battery and negative grounding only. Failure to do so may result in a fire or malfunction.
To avoid shorts in the electrical system, be sure to disconnect the () battery cable before installation.
To prevent damage
WARNING
Use speakers over 50 W (maximum input power) and between 4 to 8 (impedance value). Do not use 1 to 3 speakers for this unit.
The black cable is ground. When installing this unit
or power amp (sold separately), make sure to connect the ground wire first. Ensure that the ground wire is properly connected to metal parts of the car's body. The ground wire of the power amp and the one of this unit or any other device must be connected to the car separately with different screws. If the screw for the ground wire loosens or falls out, it could result in fire generation of smoke or malfunction.
Ground wire
POWER AMP
Other devices
Metal parts of car's body
(Another electronic
device in the car)
When replacing the fuse, be sure to only use a fuse of the rating prescribed on this product.
This product cannot be installed in a vehicle without ACC (accessory) position on the ignition switch.
F ACC O
F
O
OF OF
N STAR N STAR
T
T
ACC position
No ACC position
To avoid short-circuiting, cover the disconnected lead with insulating tape. It is especially important to insulate all unused speaker leads, which if left uncovered may cause a short circuit.
For connecting a power amp or other devices to this product, refer to the manual for the product to be connected.
Connection
Notice for the blue/white lead
When the ignition switch is turned on (ACC ON), a control signal is output through the blue/white lead. Connect to an external power amp's system remote control terminal, the auto-antenna relay control terminal, or the antenna booster power control terminal (max. 300 mA 12 V DC). The control signal is output through the blue/white lead, even if the audio source is switched off.
This product
1
2
3
4
56
Power cord
1 2
3 4 5 6 7 8 9 a
b
d
9 Blue/white Connect to system control terminal of the power amp (max. 300 mA 12 V DC).
a Light green Used to detect the ON/OFF status of the parking brake. This lead must be connected to the power supply side of the parking brake switch.
b Power supply side c Parking brake switch d Ground side
Speaker leads
1
2
c
c ba 98 7
1 Pioneer navigation system Please contact your dealer to inquire about the connectable navigation unit.
2 RGB cable(supplied with Navigation system) 3 Microphone 3 m (9 ft. 10-1/8 in.) 4 This product 5 Wired remote input
Hard-wired remote control adapter can be connected (sold separately). 6 SiriusXM Connect Vehicle Tuner Please refer to the instruction manual for SiriusXM Connect Vehicle Tuner (sold separately). 7 Antenna jack 8 Power supply 9 Fuse (10 A) a Front output (STD)/High range output (NW) b Rear output (STD)/Middle range output (NW) c SubWoofer output (STD)/Low range output (NW)
1 To power supply 2 Power cord 3 Yellow
To terminal supplied with power regardless of ignition switch position. 4 Red To electric terminal controlled by ignition switch (12 V DC) ON/OFF. 5 Orange/white To lighting switch terminal. 6 Black (ground) To vehicle (metal) body. 7 Violet/white Of the two lead wires connected to the back lamp, connect the one in which the voltage changes when the gear shift is in the REVERSE (R) position. This connection enables the unit to sense whether the car is moving forwards or backwards. 8 Yellow/black If you use an equipment with Mute function, wire this lead to the Audio Mute lead on that equipment. If not, keep the Audio Mute lead free of any connections.
L 3
5
7
F/H
8
R 4
9 a
6
b
d
R/M
c
e
Perform these connections when using a subwoofer without the optional amplifier.
51
Connection
L 3
f
b
SW
c
R 4
d e
g
b
d
h
i
c
e
1 To power supply 2 Power cord 3 Left 4 Right 5 Front speaker (STD) or high range speaker (NW) 6 Rear speaker (STD) or middle range speaker (NW) 7 White 8 White/black 9 Gray a Gray/black b Green c Green/black d Violet e Violet/black f Subwoofer (4 ) g When using a subwoofer of 2 , be sure to connect the
subwoofer to the violet and violet/black leads of this unit. Do not connect anything to the green and green/black leads. h Not used. i Subwoofer (4 ) × 2 When a subwoofer is connected to this product instead of a rear speaker, change the rear output setting in the initial setting. The subwoofer output of this product is monaural. Refer to Switching the rear speaker output on page 42 With a two-speaker system, do not connect anything to the speaker leads that are not connected to speakers.
Power amp (sold separately)
Without internal amp
Important The speaker leads are not used when this connection is in use. 52
1
3
2 4
5
5
3
12 6
7
7
3
12
8
9
9
With internal amp
Important
Front speaker and Rear speaker signals (STD) or middle range speaker and high range speaker signals (NW) are output from the speaker leads when this connection is in use.
1
3
2 8
9
9
1 System remote control Connect to Blue/white cable.
2 Power amp (sold separately) 3 Connect with RCA cable (sold separately) 4 To Rear output (STD)
To middle range output (NW) 5 Rear speaker (STD)
Middle range speaker (NW) 6 To Front output (STD)
To high range output (NW) 7 Front speaker (STD)
High range speaker (NW) 8 To subwoofer output (STD)
To low range output (NW) 9 Subwoofer (STD)
Low range speaker (NW) Please select the appropriate speaker mode between standard mode (STD) and network mode (NW). Refer to On first-time startup on page 8
iPhone and smartphone
For details on how to connect an external device using a separately sold cable, refer to the manual for the cable.
For details concerning the connection, operations and compatibility of iPhone, refer to Setup for iPod / iPhone or smartphone on page 16.
For details concerning the connection and operations of Android device, refer to Setup for iPod / iPhone or smartphone on page 16.
iPhone with Lightning connector
Connecting via the USB port
4
1
2
3
1 USB port 2 USB cable 1.5 m (4 ft. 11 in.) 3 USB interface cable for iPod / iPhone (CD-IU52) (sold
separately) 4 iPhone with Lightning connector
Connection
iPhone with 30-pin connector
Connecting via the AUX input
5 1
2 4 3
1 USB port 2 AUX input 3 USB cable 1.5 m (4 ft. 11 in.) 4 USB interface cable for iPod / iPhone (CD-IU201V) (sold
separately) 5 iPhone with 30-pin connector
Connecting via the USB port
4 1
2
3
1 USB port 2 USB cable 1.5 m (4 ft. 11 in.) 3 USB interface cable for iPod / iPhone (CD-IU51) (sold
separately) 4 iPhone with 30-pin connector
Android device
Connecting via the USB port
4 1
2 1
3
5 4
2
3
1 USB port 2 USB cable (supplied with CD-MU200 (sold separately)) 3 USB - micro USB cable (Type USB A - micro USB B) (sup-
plied with CD-MU200 (sold separately)) 4 Android device
Camera
About rear view camera When you use the rear view camera, the rear view image is automatically switched from the video by moving the shift lever to REVERSE (R). Camera View mode also allows you to check what is behind you while driving.
WARNING USE INPUT ONLY FOR REVERSE OR MIRROR IMAGE REAR VIEW CAMERA. OTHER USE MAY RESULT IN INJURY OR DAMAGE.
CAUTION The screen image may appear reversed. With the rear view camera you can keep an eye on
trailers, or back into a tight parking spot. Do not use for entertainment purposes. Objects in rear view may appear closer or more distant than in reality. The image area of full-screen images displayed while backing or checking the rear of the vehicle may differ slightly.
7 6
8
1 Rear view camera (ND-BC8) (sold separately) 2 To video output 3 RCA cable (supplied with ND-BC8) 4 This product 5 Brown (R.C IN) 6 Power supply 7 Power cord 8 Violet/white (REVERSE-GEAR SIGNAL INPUT)
Refer to Power cord on page 51 Connect only the rear view camera to R.C IN. Do not connect any other equipment. Some appropriate settings are required to use other view cameras. Refer to Setting the rear view camera on page 38
53
Connection
External video component and the display
1
3
2
4
5
6
8
7
a
cd
b
9
3
ef
g
1 Rear display with RCA input jacks 2 To video input 3 RCA cables (sold separately) 4 This product 5 Yellow (V OUT) 6 Yellow (V IN) 7 Red, white (R IN, L IN) 8 AUX input 9 Mini-jack AV cable (CD-RM10) (sold separately) a Yellow b Red, white c To Yellow d To Red, white e To video output f To audio outputs g External video component (sold separately)
54
Installation
The appropriate setting is required to use the external video component. Refer to AV input on page 36
WARNING
NEVER install the rear display in a location that enables the driver to watch the video source while driving. This product's rear video output is for connection of a display to enable passengers in the rear seats to watch the video source.
Precautions before installation
CAUTION
Never install this product in places where, or in a manner that:
Could injure the driver or passengers if the vehicle stops suddenly.
May interfere with the driver's operation of the vehicle, such as on the floor in front of the driver's seat, or close to the steering wheel or shift lever.
To ensure proper installation, be sure to use the supplied parts in the manner specified. If any parts are not supplied with this product, use compatible parts in the manner specified after you have the parts' compatibility checked by your dealer. If parts other than supplied or compatible ones are used, they may damage internal parts of this product or they may work loose and the product may become detached.
Do not install this product where it may (i) obstruct the driver's vision, (ii) impair the performance of any of the vehicle's operating systems or safety features, including airbags, hazard lamp buttons or (iii) impair the driver's ability to safely operate the vehicle.
Never install this product in front of or next to the place in the dashboard, door, or pillar from which one of your vehicle's airbags would deploy. Please refer to your vehicle's owner's manual for reference to the deployment area of the frontal airbags.
Before installing
Consult with your nearest dealer if installation requires drilling holes or other modifications of the vehicle.
Before making a final installation of this product, temporarily connect the wiring to confirm that the connections are correct and the system works properly.
Installation notes
Do not install this product in places subject to high temperatures or humidity, such as:
Places close to a heater, vent or air conditioner. Places exposed to direct sunlight, such as on top of the
dashboard. Places that may be exposed to rain, such as close to the door
or on the vehicle's floor.
Installation
Install this product horizontally on a surface within 0 to
30 degrees tolerance (within 5 degrees to the left or right).
Improper installation of the unit with the surface tilted more
1
than these tolerances increases the potential for errors in
the vehicle's location display, and might otherwise cause reduced display performance.
2
30°
When installing, to ensure proper heat dispersal when using this unit, make sure you leave ample space behind the rear panel and wrap any loose cables so they are not blocking the vents.
Leave ample
space
5 cm
5 cm
Installation using the screw
holes on the side of this
product
1 Fastening this product to the factory radiomounting bracket.
Position this product so that its screw holes are aligned with the screw holes of the bracket, and tighten the screws at three locations on each side. Use either the truss head screws (5 mm × 8 mm) or flush surface screws (5 mm × 9 mm), depending on the shape of the bracket's screw holes.
1
2
4
3
1 Factory radio-mounting bracket 2 If the pawl interferes with installation, you may bend it down
out of the way. 3 Dashboard or console 4 Truss head screw or flush surface screw
Be sure to use the screws supplied with this product.
Installing the microphone
Install the microphone in a place where its direction and distance from the driver make it easiest to pick up the driver's voice.
Be sure to turn off (ACC OFF) the product before connecting the microphone.
Depending on the vehicle model, the microphone cable length may be too short when you mount the microphone on the sun visor. In such cases, install the microphone on the steering column.
Mounting on the sun visor
1 Fit the microphone lead into the groove.
1 Microphone lead 2 Groove 2 Attach the microphone clip to the sun visor.
1
2
1 Microphone clip 2 Clamps
Use separately sold clamps to secure the lead where necessary inside the vehicle. Install the microphone on the sun visor when it is in the up position. It cannot recognize the driver's voice if the sun visor is in the down position.
Installation on the steering column
1 Detach the microphone base from the microphone clip by sliding the microphone base while pressing the tab.
55
Installation
Appendix
1
2
1 Tab 2 Microphone base 2 Mount the microphone on the steering column.
1
2
1 Double-sided tape 2 Clamps
Use separately sold clamps to secure the lead where necessary inside the vehicle. 3 Keeping it away from the steering wheel.
Adjusting the microphone angle
Troubleshooting
If you have problems operating this product, refer to this section. The most common problems are listed below, along with likely causes and solutions. If a solution to your problem cannot be found here, contact your dealer or the nearest authorized Pioneer service facility.
Common problems
A black screen is displayed, and operation is not possible using the touch panel keys. "Power OFF" mode is on.
-- Press any button on this product to release the mode.
Problems with the AV screen
CD or DVD playback is not possible. The disc is inserted upside down.
-- Insert the disc with the label upward. The disc is dirty.
-- Clean the disc. The disc is cracked or otherwise damaged.
-- Insert a normal, round disc. The files on the disc are in an irregular file format.
-- Check the file format. The disc format cannot be played back.
-- Replace the disc. The loaded disc is a type this product cannot play.
-- Check what type of disc it is.
The screen is covered by a caution message and the video cannot be shown. The parking brake lead is not connected or applied.
-- Connect the parking brake lead correctly, and apply the parking brake.
The parking brake interlock is activated. -- Park your vehicle in a safe place and apply the parking brake.
No video output from the connected equipment. The "AV Input" or "AUX Input" setting is incorrect.
-- Correct the settings.
The audio or video skips. This product is not firmly secured.
-- Secure this product firmly.
No sounds are produced. The volume level will not rise. Cables are not connected correctly.
-- Connect the cables correctly. The system is performing still, slow motion, or frame-by-
frame playback with DVD-Video. -- There is no sound during still, slow motion, or frame-by-
frame playback with DVD-Video. The system is paused or performing, fast reverse or forward
during the disc playback. -- For the media other than music CD (CD-DA), there is no
sound on fast reverse or forward.
The icon is displayed, and operation is impossible. The operation is not compatible with the video configuration.
-- This operation is not possible. (For example, the DVD playing does not feature that angle, audio system, subtitle language, etc.)
Random playback in Music Browse mode is released in the USB storage device. Random playback in Music Browse mode is canceled after
the ignition switch is turned off (ACC off). -- Switch to Music Browse mode again and turn on random
playback.
The picture stops (pauses) and this product cannot be operated. The reading of data is impossible during disc playback.
-- Stop playback once, then restart.
The picture is stretched, with an incorrect aspect ratio. The aspect setting is incorrect for the display.
-- Select the appropriate setting for that image.
A parental lock message is displayed and DVD playback is not possible. The parental lock is on.
-- Turn the parental lock off or change the level.
The parental lock for DVD playback cannot be canceled. The code number is incorrect.
-- Input the correct code number.
Playback is not with the audio language and subtitle language settings selected in "DVD/DivX Setup". The DVD playing does not feature dialog or subtitles in the
language selected in "DVD/DivX Setup". -- Switching to a selected language is not possible if the
language selected in "DVD/DivX Setup" is not recorded on the disc.
56
Appendix
The picture is extremely unclear/distorted and dark during playback. The disc features a signal to prohibit copying. (Some discs
may have this.) -- Since this product is compatible with the copy guard
analog copy protect system, the picture may suffer from horizontal stripes or other imperfections when a disc with that kind of protection signal is viewed on some displays. This is not a malfunction.
iPod cannot be operated. The iPod is frozen.
-- Reconnect the iPod with the USB interface cable for iPod / iPhone.
-- Update the iPod software version. An error has occurred.
-- Reconnect the iPod with the USB interface cable for iPod / iPhone.
-- Park your vehicle in a safe place, and turn off the engine. Turn the ignition key back to off (ACC OFF). Then restart the engine, and turn the power to this product back on.
-- Update the iPod software version. Cables are not connected correctly.
-- Connect the cables correctly.
Sound from the iPod cannot be heard. The audio output direction may switch automatically when
the Bluetooth and USB connections are used at the same time. -- Use the iPod to change the audio output direction.
Problems with the phone screen
Dialing is impossible because the touch panel keys for dialing are inactive. Your phone is out of range for service.
-- Retry after re-entering the range for service. The connection between the cellular phone and this product
cannot be established now. -- Perform the connection process. Of the two cellular phones connected to this product at the same time, if the first phone is dialing, ringing or a call is in progress, dialing cannot be performed on the second phone. -- When the operation on the first of the two cellular phones
is completed, use the switch devices key to switch to the second phone and then dial.
Problems with the Application screen
A black screen is displayed. While operating an application, the application was ended
on the smartphone side. -- Press to display the Top menu screen. The smartphone OS may be awaiting screen operation. -- Stop the vehicle in a safe place and check the screen on
the smartphone.
The screen is displayed, but operation does not work at all. An error has occurred.
-- Park your vehicle in a safe place, and then turn off the ignition switch (ACC OFF). Subsequently, turn the ignition switch to on (ACC ON) again.
-- When an Android device is connected, disconnect the Bluetooth connection from this product and then reconnect it.
The smartphone was not charged. Charging stopped because the temperature of the smart-
phone rose due to prolonged use of the smartphone during charging. -- Disconnect the smartphone from the cable, and wait until
the smartphone cools down. More battery power was consumed than was gained from
charging. -- This problem may be resolved by stopping any unneces-
sary services on the smartphone.
Sound from AppRadioOne of the Android device cannot be heard from the speakers of this unit. Depending on the Android device, the sound from
AppRadioOne may not be output from the speakers of this unit. -- Switch to " Smartphone" in the "AppRadioOne Sound"
settings.(Refer to 38)
Error messages
When problems occur with this product, an error message appears on the display. Refer to the table below to identify the problem, then take the suggested corrective action. If the error persists, record the error message and contact your dealer or your nearest Pioneer service center.
Common
AMP Error This product fails to operate or the speaker connection is
incorrect; the protective circuit is activated. -- Check the speaker connection. If the message fails to
disappear even after the engine is switched off/on, contact your dealer or an authorized Pioneer Service Station for assistance.
Pandora
Error-19 Communication failed.
-- Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it.
Skip limit reached. Skip limit reached.
-- Do not exceed the skip limit. -- Pandora limits the total number of skips per hour.
Check Device You are not logged in to the Pandora application.
-- Please log in to the Pandora application.
Incompatible USB The connected USB storage device is not supported by this
product. -- Disconnect your device and replace it with a compatible
USB storage device.
Check USB The USB connector or USB cable has short-circuited.
-- Check that the USB connector or USB cable is not caught in something or damaged.
The connected USB storage device consumes more than maximum allowable current. -- Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.
Cannot play music due to licensing restrictions. The Pandora application is accessed/relocated from outside
the licensing region. -- Access Pandora from within the licensing region.
57
Appendix
Spotify
Skip limit reached. Skip limit reached.
-- Do not exceed the skip limit. -- Spotify limits the total number of skips per hour.
Check USB The USB connector or USB cable has short-circuited.
-- Check that the USB connector or USB cable is not caught in something or damaged.
The connected USB storage device consumes more than maximum allowable current. -- Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.
SiriusXM Satellite Radio
Check Antenna The antenna connection is incorrect.
-- Check the antenna connection. If the message fails to disappear even after the engine is switched off/on, contact your dealer or the nearest authorized Pioneer service center for assistance.
Check Tuner The SiriusXM Connect Vehicle Tuner connection is incorrect.
-- Check the tuner connection and battery voltage. If the message fails to disappear even after the engine is switched off/on, contact your dealer or the nearest authorized Pioneer service center for assistance.
No Signal The SiriusXM Connect Vehicle Tuner is having difficulty
receiving the SiriusXM satellite signal. -- Verify that your vehicle is outdoors with a clear view of the
southern sky. -- Verify that the SiriusXM magnetic mount antenna is
mounted on a metal surface on the outside of the vehicle. -- Move the SiriusXM antenna away from any obstructions.
No Content TuneScan is not available.
-- Perform the operation with another preset channel.
Channel Not Available The channel that you have requested is not a valid SiriusXM
channel. -- Check the SiriusXM channel lineup.
Subscription Updated Press Enter to Continue This product has detected a change in your SiriusXM sub-
scription status. -- Touch [Enter] to clear the message. 58
Channel Not Subscribed. Call SiriusXM to Subscribe. The channel that you have requested is not included in your
SiriusXM subscription package. -- Check the content of your SiriusXM subscription package.
Channel Locked Please Enter the Lock Code Locked by the radio Parental Control feature.
-- Release the channel lock.
Artist Unavailable The alert memo function is not available.
-- Perform the operation with another channel.
Song Unavailable The alert memo function is not available.
-- Perform the operation with another channel.
Team Unavailable The alert memo function is not available.
-- Perform the operation with another channel.
Alert Memory Full You can manage alert memory in the alert list The memory is full.
-- Clear the alert list.
Memory Full The memory has become full while playback was paused.
-- Resume playback.
Memory Nearly Full The memory has become nearly full while playback was
paused. -- Resume playback.
Tune Mix advisory There are no qualified TuneMix channels in this band.
-- Requires two or more qualified music channels to be stored as presets in the current band.
Disc
Error-02-XX/FF-FF The disc is dirty.
-- Clean the disc. The disc is scratched.
-- Replace the disc. The disc is loaded upside down.
-- Check that the disc is loaded correctly. There is an electrical or mechanical error.
-- Press the RESET button.
Different Region Disc The disc does not have the same region number as this
product. -- Replace the DVD with one bearing the correct region
number.
Unplayable Disc This type of disc cannot be played on this product.
-- Replace the disc with one that can be played on this product.
Unplayable File This type of file cannot be played on this product.
-- Select a file that can be played.
Skipped The inserted disc contains DRM protected files.
-- The protected files are skipped.
Protect All the files on the inserted disc are embedded with DRM.
-- Replace the disc.
TEMP The temperature of this product is outside the normal operat-
ing range. -- Wait until this product returns to a temperature within the
normal operating limits.
This DivX rental has expired. The inserted disc contains expired DivX VOD content.
-- Select a file that can be played.
Unable to write to flash memory. The playback history for VOD contents cannot be saved for
some reason. -- Retry. -- If the message appears frequently, consult your dealer.
Your device is not authorized to play this DivX protected video. This product's DivX registration code has not been autho-
rized by the DivX VOD contents provider. -- Register this product to the DivX VOD contents provider.
Video frame rate not supported DivX file's frame rate is more than 30 fps.
-- Select a file that can be played.
Audio Format not supported This type of file is not supported on this product.
-- Select a file that can be played.
USB storage device
Error-02-9X/-DX Communication failed.
-- Turn the ignition switch OFF and back ON. -- Disconnect the USB storage device. -- Change to a different source. Then, return to the USB
storage device.
Appendix
Unplayable File This type of file cannot be played on this product.
-- Select a file that can be played. Security for the connected USB storage device is enabled.
-- Follow the USB storage device instructions to disable security.
Skipped The connected USB storage device contains DRM protected
files. -- The protected files are skipped.
Protect All the files on the connected USB storage device are
embedded with DRM. -- Replace the USB storage device.
Incompatible USB The connected USB storage device is not supported by this
product. -- Disconnect your device and replace it with a compatible
USB storage device.
Check USB The USB connector or USB cable is short-circuited.
-- Check that the USB connector or USB cable is not caught in something or damaged.
The connected USB storage device consumes more than maximum allowable current. -- Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.
HUB Error The connected USB hub is not supported by this product.
-- Directly connect the USB storage device to this product.
No Response This product cannot recognize the connected USB storage
device. -- Disconnect the device and replace it with another USB
storage device.
USB was disconnected for device protection. Do not reinsert this USB memory into the unit. Please restart the unit. The USB connector or USB cable is short-circuited.
-- Check that the USB connector or USB cable is not caught in something or damaged.
The connected USB storage device consumes more than maximum allowable current. -- Disconnect the USB storage device and do not use it. Turn the ignition switch to OFF, then to ACC or ON and then connect a compliant USB storage device.
The USB interface cable for iPod / iPhone is short-circuited. -- Confirm that the USB interface cable for iPod / iPhone or USB cable is not caught in something or damaged.
Audio Format not supported This type of file is not supported on this product.
-- Select a file that can be played.
iPod
Error-02-6X/-9X/-DX iPod failure.
-- Disconnect the cable from the iPod. Once the iPod's main menu is displayed, reconnect the iPod and reset it.
Error-02-67 The iPod firmware version is old.
-- Update the iPod version.
iTunes tagging
Error-8D Built-in FLASH ROM encountered an error.
-- Turn the ignition switch to OFF and then to ON.
Tag store failed. Tag information cannot be stored in this product.
-- Try again.
Already stored. This tag information is already stored in memory.
-- Tag information can only be saved once for any given song. Tag information cannot be saved for the same song more than once.
Memory full. Connect iPod. The tag information is successfully stored. The flash memory
of this product has become full. -- The tag information on this product is transferred to the
iPod automatically when an iPod is connected.
Memory full. Tags not stored. Connect iPod. This product's flash memory used as the temporary storage
area is full. -- The tag information on this product is transferred to the
iPod automatically when an iPod is connected.
iPod full. Tags not transferred. Memory used for tag information on the iPod is full.
-- Sync the iPod with iTunes and clean up the tagged playlist.
Tag transfer failed. Reconnect your iPod. This product's tag information cannot transfer to the iPod.
-- Check the iPod and try again.
Bluetooth
Error-10 The power failed for the Bluetooth module of this product.
-- Turn the ignition switch to OFF and then to ON. If the error message is still displayed after performing the above action, please contact your dealer or an authorized Pioneer Service Station.
Handling and care of discs
Some basic precautions are necessary when handling your discs.
Built-in drive and care
Use only conventional, fully circular discs. Do not use shaped discs.
Do not use cracked, chipped, warped, or otherwise damaged discs as they may damage the built-in drive.
Use 12-cm discs. Do not use 8-cm discs or an adapter for 8-cm discs.
When using discs that can be printed on label surfaces, check the instructions and the warnings of the discs. Depending on the discs, inserting and ejecting may not be possible. Using such discs may result in damage to this equipment.
Do not attach labels, write on or apply chemicals to the surface of the discs.
Do not attach commercially available labels or other materials to the discs.
To clean a disc, wipe it with a soft cloth, moving outward from the center.
Condensation may temporarily impair the built-in drive's performance.
59
Appendix
Playback of discs may not be possible because of disc characteristics, disc format, recorded application, playback environment, storage conditions and so on.
Road shocks may interrupt disc playback. Read the precautions for discs before using them.
Ambient conditions for playing a disc
At extremely high temperatures, a temperature cutout protects this product by switching it off automatically.
Despite our careful design of the product, small scratches that do not affect actual operation may appear on the disc surface as a result of mechanical wear, ambient conditions for use or handling of the disc. This is not a sign of the malfunction of this product. Consider it to be normal wear and tear.
Playable discs
DVD-Video
is a trademark of DVD Format/Logo Licensing
Corporation.
It is not possible to play DVD-Audio discs. This DVD drive
may not be able to play all discs bearing the marks shown
above.
CD
AVCHD recorded discs
This unit is not compatible with discs recorded in AVCHD (Advanced Video Codec High Definition) format. Do not insert AVCHD discs. If inserted, the disc may not be ejected.
Playing DualDisc
DualDiscs are two-sided discs that have a recordable CD for audio on one side and a recordable DVD for video on the other.
Playback of the DVD side is possible with this product. However, since the CD side of DualDiscs is not physically compatible with the general CD standard, it may not be possible to play the CD side with this product.
Frequent loading and ejecting of a DualDisc may result in scratches to the disc.
Serious scratches can lead to playback problems on this product. In some cases, a DualDisc may become stuck in the disc-loading slot and will not eject. To prevent this, we recommend you refrain from using DualDisc with this product.
Please refer to the manufacturer for more detailed information about DualDiscs.
Dolby Digital
This product will down-mix Dolby Digital signals internally and the sound will be output in stereo. p Manufactured under license from Dolby Laboratories. Dolby,
Dolby Audio and the double-D symbol are trademarks of Dolby Laboratories.
Detailed information for play-
able media
Compatibility
Common notes about disc compatibility
Certain functions of this product may not be available for some discs.
Compatibility with all discs is not guaranteed. It is not possible to playback DVD-ROM/DVD-RAM discs. Playback of discs may become impossible with direct expo-
sure to sunlight, high temperatures, or depending on the storage conditions in the vehicle.
DVD-Video discs
DVD-Video discs that have incompatible region numbers cannot be played on this DVD drive. The region number of the player can be found on this product's chassis.
DVD-R/DVD-RW/DVD-R SL (Single Layer)/DVD-R DL (Dual Layer) discs
Unfinalized discs which have been recorded with the Video format (video mode) cannot be played back.
Discs which have been recorded with the Video Recording format (VR mode) cannot be played back.
DVD-R DL (Dual Layer) discs which have been recorded with Layer Jump recording cannot be played back.
For detailed information about recording mode, please contact the manufacturer of media, recorders, or writing software.
CD-R/CD-RW discs
Unfinalized discs cannot be played back. It may not be possible to playback CD-R/CD-RW discs
recorded on a music CD recorder or a computer because of disc characteristics, scratches or dirt on the disc, or dirt, scratches or condensation on the lens of the built-in drive. Playback of discs recorded on a computer may not be possible, depending on the recording device, writing software, their settings, and other environmental factors. Please record with the correct format. (For details, please contact manufacturer of media, recorders, or writing software.)
60
Appendix
Titles and other text information recorded on a CD-R/CD-RW disc may not be displayed by this product (in the case of audio data (CD-DA)).
Read the precautions with CD-R/CD-RW discs before using them.
Common notes about the USB storage device
Do not leave the USB storage device in any location with high temperatures.
Depending on the kind of the USB storage device you use, this product may not recognize the storage device or files may not be played back properly.
The text information of some audio and video files may not be correctly displayed.
File extensions must be used properly. There may be a slight delay when starting playback of files
on an USB storage device with complex folder hierarchies. Operations may vary depending on the kind of an USB stor-
age device. It may not be possible to play some music files from USB
because of file characteristics, file format, recorded application, playback environment, storage conditions, and so on.
USB storage device compatibility For details about USB storage device compatibility with this
product, refer to Specifications on page 65. Protocol: bulk You cannot connect a USB storage device to this product via
a USB hub. Partitioned USB storage device is not compatible with this
product. Firmly secure the USB storage device when driving. Do not
let the USB storage device fall onto the floor, where it may become jammed under the brake or gas pedal. There may be a slight delay when starting playback of audio files encoded with image data. Some USB storage devices connected to this product may generate noise on the radio. Do not connect anything other than the USB storage device. The sequence of audio files on USB storage device For USB storage device, the sequence is different from that of USB storage device.
Handling guidelines and supplemental information This product is not compatible with the Multi Media Card
(MMC). Copyright protected files cannot be played back.
Common notes about DivX files
Notes specific to DivX files Only DivX files downloaded from DivX partner sites are guar-
anteed for proper operation. Unauthorized DivX files may not operate properly. DRM rental files cannot be operated until playing back is started. This product corresponds to a DivX file display of up to 1 590 minutes 43 seconds. Search operations beyond this time limit are prohibited. DivX VOD file playback requires supplying the ID code of this product to the DivX VOD provider. Regarding the ID code, refer to Displaying your DivX VOD registration code on page 47. For details on the Divx video versions that can be played on
this product, refer to Specifications on page 65.
DivX subtitle files Srt format subtitle files with the extension ".srt" can be used. Only one subtitle file can be used for each DivX file. Multiple
subtitle files cannot be associated. Subtitle files that are named with the same character string
as the DivX file before the extension are associated with the DivX file. The character strings before the extension must be exactly the same. However, if there is only one DivX file and one subtitle file in a single folder, the files are associated even if the file names are not the same. The subtitle file must be stored in the same folder as the DivX file. Up to 255 subtitle files may be used. Any more subtitle files will not be recognized. Up to 64 characters can be used for the name of the subtitle file, including the extension. If more than 64 characters are used for the file name, the subtitle file may not be recognized. The character code for the subtitle file should comply with ISO-8859-1. Using characters other than ISO-8859-1 may cause the characters to be displayed incorrectly. The subtitles may not be displayed correctly if the displayed characters in the subtitle file include control code. For materials that use a high transfer rate, the subtitles and video may not be completely synchronized. If multiple subtitles are programed to display within a very short time frame, such as 0.1 seconds, the subtitles may not be displayed at the correct time.
Media compatibility chart
General
Maximum playback time of audio file stored in the disc: 60 h Maximum playback time of audio file stored on an USB storage device: 7.5 h (450 minutes)
CD-R/-RW File system: ISO9660 level 1.ISO9660 level 2.Romeo, Joliet.UDF 1.02/1.50/2.00/2.01/2.50 Maximum number of folders: 700 Maximum number of files: 999 Playable file types: MP3, WMA, AAC, DivX, MPEG1, MPEG2, MPEG4
DVD-R/-R SL/-R DL/ DVD-RW File system: ISO9660 level 1.ISO9660 level 2.Romeo, Joliet.UDF 1.02/1.50/2.00/2.01/2.50 Maximum number of folders: 700 Maximum number of files: 3 500 Playable file types: MP3, WMA, AAC, DivX, MPEG1, MPEG2, MPEG4
USB storage device File system: FAT16/FAT32 Maximum number of folders: 1 500 Maximum number of files: 15 000 Playable file types: MP3, WMA, AAC, WAV, FLAC, H.264, MPEG4, JPEG
MP3 compatibility
Ver. 2.x of ID3 tag is prioritized when both Ver. 1.x and Ver. 2.x exist. This product is not compatible with the following: MP3i (MP3 interactive), mp3 PRO, m3u playlist
CD-R/-RW File extension: .mp3 Bit rate: 8 kbps to 320 kbps (CBR), VBR Sampling frequency: 16 kHz to 48 kHz (32 kHz, 44.1 kHz,48 kHz for emphasis) ID3 tag: ID3 tag Ver. 1.0, 1.1, 2.2, 2.3
DVD-R/-R SL/-R DL/ DVD-RW File extension: .mp3 Bit rate: 8 kbps to 320 kbps (CBR), VBR Sampling frequency: 16 kHz to 48 kHz (32 kHz, 44.1 kHz,48 kHz for emphasis) ID3 tag: ID3 tag Ver. 1.0, 1.1, 2.2, 2.3
USB storage device
File extension: .mp3
Bit rate: 8 kbps to 320 kbps (CBR), VBR
61
Appendix
Sampling frequency: 8 kHz to 48 kHz ID3 tag: ID3 tag Ver. 1.0, 1.1, 2.2, 2.3, 2.4
WMA compatibility
This product is not compatible with the following: Windows MediaTM Audio 9 Professional, Lossless, Voice
CD-R/-RW File extension: .wma Bit rate: 5 kbps to 320 kbps (CBR), VBR Sampling frequency: 8 kHz to 48 kHz
DVD-R/-R SL/-R DL/ DVD-RW File extension: .wma Bit rate: 5 kbps to 320 kbps (CBR), VBR Sampling frequency: 8 kHz to 48 kHz
USB storage device File extension: .wma Bit rate: 5 kbps to 320 kbps (CBR), VBR Sampling frequency: 8 kHz to 48 kHz
WAV compatibility
The sampling frequency shown in the display may be rounded. WAV files on the CD-R/-RW, DVD-R/-RW/-R SL/-R DL cannot be played.
USB storage device File extension: .wav Format: Linear PCM (LPCM) Sampling frequency: 16 kHz to 48 kHz Quantization bits: 8 bits and 16 bits
AAC compatibility
This product plays back AAC files encoded by iTunes.
CD-R/-RW File extension: .m4a Bit rate: 8 kbps to 320 kbps (CBR) Sampling frequency: 8 kHz to 44.1 kHz
DVD-R/-R SL/-R DL/ DVD-RW File extension: .m4a Bit rate: 8 kbps to 320 kbps (CBR) Sampling frequency: 8 kHz to 44.1 kHz
USB storage device File extension: .m4a Bit rate: 8 kbps to 320 kbps (CBR) Sampling frequency: 8 kHz to 48 kHz
62
FLAC compatibility
USB storage device File extension: .flac Bit rate: 8 kbps, 16 kbps, 24 kbps Sampling frequency: 8 kHz to 48 kHz
DivX compatibility
This product is not compatible with the following: DivX Ultra format, DivX files without video data, DivX files encoded with LPCM (Linear PCM) audio codec Depending on the file information composition, such as the number of audio streams, there may be a slight delay in the start of playback on discs. If a file contains more than 4 GB, playback stops before the end. Some special operations may be prohibited because of the composition of DivX files. Files with high transfer rates may not be played back correctly. The standard transfer rate is 4 Mbps for CDs and 10.08 Mbps for DVDs. DivX files on the USB storage device cannot be played.
CD-R/-RW File extension: .avi/.divx Profile (DivX version): Home Theater Ver. 3.11/Ver. 4.x/Ver. 5.x/ Ver. 6.x Compatible audio codec: MP3, Dolby Digital Bit rate (MP3): 8 kbps to 320 kbps (CBR), VBR Sampling frequency (MP3): 16 kHz to 48 kHz (32 kHz, 44.1 kHz, 48 kHz for emphasis) Maximum image size: 720 pixels × 576 pixels Maximum file size: 4 GB
DVD-R/-R SL/-R DL/ DVD-RW File extension: .avi/.divx Profile (DivX version): Home Theater Ver. 3.11/Ver. 4.x/Ver. 5.x/ Ver. 6.x Compatible audio codec: MP3, Dolby Digital Bit rate (MP3): 8 kbps to 320 kbps (CBR), VBR Sampling frequency (MP3): 16 kHz to 48 kHz (32 kHz, 44.1 kHz, 48 kHz for emphasis) Maximum image size: 720 pixels × 576 pixels Maximum file size: 4 GB
Video files compatibility (USB)
Files may not be played back properly depending on the environment in which the file was created or on the contents of the file. This product is not compatible with packet write data transfer.
This product can recognize up to 32 characters, beginning with the first character, including extension for the file and folder name. Depending on the display area, this product may try to display them with a reduced font size. However, the maximum number of the characters that you can display varies according to the width of each character, and of the display area. Folder selection sequence or other operations may be altered, depending on the encoding or writing software. Regardless of the length of blank section between the songs of original recording, compressed audio discs play with a short pause between songs.
.avi Format: MPEG-4/H.264 Compatible video codec: MPEG-4 (Simple Profile)/H.264 (Base Line Profile) Compatible audio codec: Linear PCM (LPCM) MP3 Maximum resolution: 640 pixels x 360 pixels Maximum Frame rate: 30 fps Maximum file size: 2 GB Maximum playback time: 150 minutes
Files may not be able to be played back depending on the bit rate.
.mp4 Format: MPEG-4/H.264 Compatible video codec: MPEG-4 (Simple Profile)/H.264 (Base Line Profile) Compatible audio codec: AAC/Linear PCM (LPCM) MP3 Maximum resolution: 640 pixels x 360 pixels Maximum Frame rate: 30 fps Maximum file size: 2 GB Maximum playback time: 150 minutes
Files may not be able to be played back depending on the bit rate.
.3gp Format: MPEG-4/H.264 Compatible video codec: MPEG-4 (Simple Profile)/H.264 (Base Line Profile) Compatible audio codec: AAC/Linear PCM (LPCM) MP3 Maximum resolution: 640 pixels x 360 pixels Maximum Frame rate: 30 fps Maximum file size: 2 GB Maximum playback time: 150 minutes
Files may not be able to be played back depending on the bit rate.
.mkv Format: MPEG-4/H.264 Compatible video codec: MPEG-4 (Simple Profile)/H.264 (Base Line Profile)
Appendix
Compatible audio codec: AAC/Linear PCM (LPCM) MP3/AC-3 Maximum resolution: 640 pixels x 360 pixels Maximum Frame rate: 30 fps Maximum file size: 2 GB Maximum playback time: 150 minutes
Files may not be able to be played back depending on the bit rate. .mov Format: MPEG-4/H.264 Compatible video codec: MPEG-4 (Simple Profile)/H.264 (Base Line Profile) Compatible audio codec: AAC/Linear PCM (LPCM) MP3 Maximum resolution: 640 pixels x 360 pixels Maximum Frame rate: 30 fps Maximum file size: 2 GB Maximum playback time: 150 minutes Files may not be able to be played back depending on the bit rate.
Example of a hierarchy
This product assigns folder numbers. The user cannot assign folder numbers.
Bluetooth
The Bluetooth® word mark and logos are registered trademarks owned by the Bluetooth SIG, Inc. and any use of such marks by PIONEER CORPORATION is under license. Other trademarks and trade names are those of their respective owners.
SiriusXM® satellite radio
SERVICES; LOSS OF USE, DATA, OR PROFITS; OR BUSINESS INTERRUPTION) HOWEVER CAUSED AND ON ANY THEORY OF LIABILITY, WHETHER IN CONTRACT, STRICT LIABILITY, OR TORT (INCLUDING NEGLIGENCE OR OTHERWISE) ARISING IN ANY WAY OUT OF THE USE OF THIS SOFTWARE, EVEN IF ADVISED OF THE POSSIBILITY OF SUCH DAMAGE.
DivX
Sirius, XM and all related marks and logos are trademarks of SiriusXM Radio, Inc. All rights reserved.
WMA
Windows Media is either a registered trademark or trademark of Microsoft Corporation in the United States and/or other countries. This product includes technology owned by Microsoft Corporation and cannot be used or distributed without a license from Microsoft Licensing, Inc.
FLAC
Copyright © 2000-2009 Josh Coalson Copyright © 2011-2013 Xiph.Org Foundation Redistribution and use in source and binary forms, with or without modification, are permitted provided that the following conditions are met: -- Redistributions of source code must retain the above
copyright notice, this list of conditions and the following disclaimer. -- Redistributions in binary form must reproduce the above copyright notice, this list of conditions and the following disclaimer in the documentation and/or other materials provided with the distribution. -- Neither the name of the Xiph.org Foundation nor the names of its contributors may be used to endorse or promote products derived from this software without specific prior written permission. THIS SOFTWARE IS PROVIDED BY THE COPYRIGHT HOLDERS AND CONTRIBUTORS "AS IS" AND ANY EXPRESS OR IMPLIED WARRANTIES, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY AND FITNESS FOR A PARTICULAR PURPOSE ARE DISCLAIMED. IN NO EVENT SHALL THE FOUNDATION OR CONTRIBUTORS BE LIABLE FOR ANY DIRECT, INDIRECT, INCIDENTAL, SPECIAL, EXEMPLARY, OR CONSEQUENTIAL DAMAGES (INCLUDING, BUT NOT LIMITED TO, PROCUREMENT OF SUBSTITUTE GOODS OR
DivX Certified® devices have been tested for high-quality DivX® (.divx, .avi) video playback. When you see the DivX logo, you know you have the freedom to play your favorite DivX movies. DivX®, DivX Certified® and associated logos are trademarks of DivX, LLC and are used under license. This DivX Certified® device has passed rigorous testing to ensure it plays DivX® video. Find your registration code in the DivX VOD section of your device setup menu.
Refer to Displaying your DivX VOD registration code on page
47
AAC
AAC is short for Advanced Audio Coding and refers to an audio compression technology standard used with MPEG-2 and MPEG-4. Several applications can be used to encode AAC files, but file formats and extensions differ depending on the application which is used to encode. This unit plays back AAC files encoded by iTunes.
AndroidTM
Android is a trademark of Google Inc.
Detailed information regarding connected iPod devices
Pioneer accepts no responsibility for data lost from an
iPod, even if that data is lost while using this product.
Please back up your iPod data regularly.
Do not leave the iPod in direct sunlight for extended
amounts of time. Extended exposure to direct sunlight
can result in iPod malfunction due to the resulting high
63
Appendix
temperature. Do not leave the iPod in any location with high
temperatures. Firmly secure the iPod when driving. Do not let the iPod
fall onto the floor, where it may become jammed under the brake or gas pedal. For details, refer to the iPod manuals.
iPhone and iPod
"Made for iPod" and "Made for iPhone" mean that an electronic accessory has been designed to connect specifically to iPod or iPhone, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod or iPhone may affect wireless performance. iPhone, iPod, iPod classic, iPod nano, and iPod touch are trademarks of Apple Inc., registered in the U.S. and other countries.
Lightning
Lightning is a trademark of Apple Inc.
App Store
App Store is a service mark of Apple Inc.
iOS
iOS is a trademark on which Cisco holds the trademark right in the US and certain other countries.
iTunes
iTunes is a trademark of Apple Inc., registered in the U.S. and other countries.
Using app-based connected
content
IMPORTANT
Requirements to access app-based connected content services using this product: Latest version of the Pioneer compatible connected
content application(s) for the smartphone, available from the service provider, downloaded to your smartphone. A current account with the content service provider. Smartphone Data Plan. Note: if the Data Plan for your smartphone does not provide for unlimited data usage, additional charges from your carrier may apply for accessing app-based connected content via 3G, EDGE and/or LTE (4G) networks. Connection to the Internet via 3G, EDGE, LTE (4G) or Wi-Fi network. Optional Pioneer adapter cable connecting your iPhone to this product.
Limitations:
Access to app-based connected content will depend on the availability of cellular and/or Wi-Fi network coverage for the purpose of allowing your smartphone to connect to the Internet.
Service availability may be geographically limited to the region. Consult the connected content service provider for additional information.
Ability of this product to access connected content is subject to change without notice and could be affected by any of the following: compatibility issues with future firmware versions of smartphone; compatibility issues with future versions of the connected content application(s) for the smartphone; changes to or discontinuation of the connected Content application(s) or service by its provider.
Pandora®
Pandora, the Pandora logo, and the Pandora trade dress are trademarks or registered trademarks of Pandora Media, Inc. Used with permission. Pandora is only available in certain countries.
Spotify®
Notice regarding video viewing
Remember that use of this system for commercial or public viewing purposes may constitute an infringement on the author's rights as protected by the Copyright Law.
Notice regarding DVD-Video viewing
This item incorporates copy protection technology that is protected by U.S. patents and other intellectual property rights of Rovi Corporation. Reverse engineering and disassembly are prohibited.
Notice regarding MP3 file usage
Supply of this product only conveys a license for private, noncommercial use and does not convey a license nor imply any right to use this product in any commercial (i.e. revenue-generating) real time broadcasting (terrestrial, satellite, cable and/or any other media), broadcasting/streaming via internet, intranets and/or other networks or in other electronic content distribution systems, such as pay-audio or audio-on-demand applications. An independent license for such use is required.
64
Appendix
Using the LCD screen correctly
Handling the LCD screen
When the LCD screen is subjected to direct sunlight for a long period of time, it will become very hot, resulting in possible damage to the LCD screen. When not using this product, avoid exposing it to direct sunlight as much as possible.
The LCD screen should be used within the temperature ranges shown in Specifications on page 65.
Do not use the LCD screen at temperatures higher or lower than the operating temperature range, because the LCD screen may not operate normally and could be damaged.
The LCD screen is exposed in order to increase its visibility within the vehicle. Please do not press strongly on it as this may damage it.
Do not push the LCD screen with excessive force as this may scratch it.
Never touch the LCD screen with anything besides your finger when operating the touch panel functions. The LCD screen can scratch easily.
Liquid crystal display (LCD) screen
If the LCD screen is near the vent of an air conditioner, make sure that air from the air conditioner is not blowing on it. Heat from the heater may break the LCD screen, and cool air from the cooler may cause moisture to form inside this product, resulting in possible damage.
Small black dots or white dots (bright dots) may appear on the LCD screen. These are due to the characteristics of the LCD screen and do not indicate a malfunction.
The LCD screen will be difficult to see if it is exposed to direct sunlight.
When using a cellular phone, keep the antenna of the cellular phone away from the LCD screen to prevent disruption of the video in the form of disturbances such as spots or colored stripes.
Maintaining the LCD screen
When removing dust from or cleaning the LCD screen, first turn this product off and then wipe the screen with a soft dry cloth.
When wiping the LCD screen, take care not to scratch the surface. Do not use harsh or abrasive chemical cleaners.
LED (light-emitting diode) backlight
A light emitting diode is used inside the display to illuminate the LCD screen. At low temperatures, using the LED backlight may increase
image lag and degrade the image quality because of the characteristics of the LCD screen. Image quality will improve with an increase in temperature. The product lifetime of the LED backlight is more than 10 000 hours. However, it may decrease if used in high temperatures. If the LED backlight reaches the end of its product lifetime, the screen will become dimmer and the image will no longer be visible. In that case, please consult your dealer or the nearest authorized Pioneer Service Station.
Specifications
General
Rated power source........................................................... 14.4 V DC ( 10.8 V to 15.1 V allowable)
Grounding system........................................................Negative type Maximum current consumption ....................................... .... 10.0 A Dimensions (W × H × D): D Chassis ....................................... .... 178 mm × 100 mm × 165 mm
(7 in. × 3-7/8 in. × 6-1/2 in.) Nose .................................................... 171 mm × 97 mm × 18 mm
( 6-3/4 in. × 3-7/8 in. × 3/4 in.) (AVH-X490BS) Nose .......................................................171 mm × 97 mm × 3 mm ( 6-3/4 in. × 3-7/8 in. × 1/8 in.) (AVH-X390BS) Weight ........................................................................ 1.8 kg (4.0 lbs) (AVH-X490BS) Weight ........................................................................ 1.6 kg (3.5 lbs) (AVH-X390BS)
Display
Screen size/aspect ratio .............................. .....6.95 inch wide/16:9 (effective display area: 156.6 mm × 81.6 mm) (6-1/8 in. × 3-1/4 in.) (AVH-X490BS)
Screen size/aspect ratio ................................ .....6.2 inch wide/16:9 (effective display area: 137.52 mm × 77.232 mm) (5-3/8 in. × 3 in.) (AVH-X390BS)
Pixels ..................................................... .... 1 152 000 ( 2 400 × 480 ) Display method......................................... TFT Active matrix driving
Color system............ PAL/NTSC/PAL-M/PAL-N/SECAM compatible
Audio
Maximum power output ......................................·50 W × 4 ch/4 ·50 W × 2 ch/4 + 70 W × 1 ch/2 (for subwoofer) Continuous power output ...... 22 W × 4 (50 Hz to 15 kHz, 5 %THD,
4 LOAD, Both Channels Driven) Load impedance ............... 4 (4 to 8 [2 for 1 ch] allowable) Preout output level (max) .......................................................... 4.0 V Equalizer (13-Band Graphic Equalizer): Frequency......... 50 Hz/80 Hz/125 Hz/200 Hz/315 Hz/500 Hz/800 Hz
/1.25 kHz/2 kHz/3.15 kHz/5 kHz/8 kHz/12.5 kHz Gain ................................................................... ±12 dB (2 dB /step) <Standard Mode>
HPF: Frequency........... 50 Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz Slope ..............6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct, OFF Subwoofer/LPF: Frequency........... 50 Hz/63 Hz/80 Hz/100 Hz/125 Hz/160 Hz/200 Hz Slope ..............6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct, OFF Gain ...................................................+10 dB to 24 dB (1 dB /step) Phase....................................................................... Normal/Reverse Time alignment ...................................... 0 to 140 step (1 inch/step) Bass boost: Gain ........................................................................... +12 dB to 0 dB Speaker level .....................................+10 dB to 24 dB (1 dB/step) <Network Mode>
HPF (High): Frequency ....... ..... 1.25 kHz/1.6 kHz/2 kHz/2.5 kHz/3.15 kHz/4 kHz
/5 kHz/6.3 kHz/8 kHz/10 kHz/12.5 kHz Slope ...................... 6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct HPF (Mid): Frequency ....25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 Hz/100 Hz/125 Hz
/160 Hz/200 Hz/250 Hz Slope ..............6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct, OFF LPF (Mid): Frequency ....... ..... 1.25 kHz/1.6 kHz/2 kHz/2.5 kHz/3.15 kHz/4 kHz
/5 kHz/6.3 kHz/8 kHz/10 kHz/12.5 kHz Slope ..............6 dB/oct, 12 dB/oct, 18 dB/oct, 24 dB/oct, OFF Subwoofer: Frequency ....25 Hz/31.5 Hz/40 Hz/50 Hz/63 Hz/80 Hz/100 Hz/125 Hz
/160 Hz/200 Hz/250 Hz Slope ......12 dB/oct, 18 dB/oct, 24 dB/oct, 30 dB/oct, 36 dB/
oct, OFF Gain ...................................................+10 dB to 24 dB (1 dB /step) Phase....................................................................... Normal/Reverse Time alignment ...................................... 0 to 140 step (1 inch/step) Bass boost: Gain ........................................................................... +12 dB to 0 dB Speaker level .....................................+10 dB to 24 dB (1 dB/step)
65
Appendix
DVD drive
System..........DVD-Video, VCD, CD, MP3, WMA, AAC, DivX, MPEG player
Usable discs.....DVD-VIDEO, VIDEO-CD, CD, CD-R, CD-RW, DVD-R, DVD-RW, DVD-RDL
Region number ................................................................................1 Signal Format: Sampling frequency........................ 32 kHz/44.1 kHz/48 kHz/96 kHz Number of quantization bits.................... 16 bit/20 bit/24 bit; linear Frequency response ...... 5 Hz to 22 000 Hz (with DVD, at sampling
frequency 48 kHz) Signal-to-noise ratio ......91 dB (1 kHz) (IHF-A network) (RCA level) Output level: Video .............................................................. 1.0 Vp-p/75 (±0.2 V) Number of channels...........................................................2 (stereo) MP3 decoding format............................. MPEG-1 & 2 Audio Layer 3 WMA decoding format .........Ver.7, 7.1, 8, 9, 10, 11, 12 (2 ch audio)
(Windows Media Player) AAC decoding format ........... MPEG-4 AAC (iTunes encoded only):
.m4a (Ver. 10.6 and earlier) DivX decoding format .....Home Theater Ver. 3, 4, 5.2, 6 (Except ultra
and HD) : .avi, .divx MPEG video decoding format ...MPEG-1, MPEG-2, MPEG-4 (part2),
MS MPEG-4 (ver. 3)
USB
USB standard spec. .... USB 1.1, USB 2.0 full speed, USB 2.0 high speed
Max current supply ................................................................... 1.0 A USB Class ......... MSC (Mass Storage Class), MTP (Media Transfer
Protocol) File system ....................................................................FAT16, FAT32 MP3 decoding format............................. MPEG-1 & 2 Audio Layer 3 WMA decoding format.........Ver. 7, 7.1, 8, 9, 10, 11, 12 (2 ch audio)
(Windows Media Player) AAC decoding format.....MPEG-4 AAC (iTunes encoded only) (Ver.
10.6 and earlier) FLAC decoding format ........Ver. 1.3.0 (Free Lossless Audio Codec) WAV signal format (MSC Mode only)............................Linear PCM Sampling Frequency..........Linear PCM: 16 kHz, 22.05 kHz, 24 kHz,
32 kHz, 44.1 kHz, 48 kHz JPEG decoding format (MSC Mode only) ................ .jpeg, .jpg, .jpe Pixel Sampling..................................................................4:2:2, 4:2:0 Decode Size.........MAX: 8 192 (H) x 7 680 (W), MIN: 32 (H) x 32 (W) H.264 video decoding format ............................... Base Line Profile MPEG4 video decoding format .................................. Simple Profile
Bluetooth
Version .......................................................... Bluetooth 3.0 certified
66
Output power.............................................................. +4 dBm Max. (Power class 2)
Frequency band ...................................... 2 400 MHz to 2 483.5 MHz
FM tuner
Frequency range.......................................... 87.9 MHz to 107.9 MHz Usable sensitivity ..............12 dBf (1.1 µV/75 , mono, S/N: 30 dB) Signal-to-noise ratio ............... 72 dB (analog broadcasting) (IHF-A
network)
AM tuner
Frequency range................................530 kHz to 1 710 kHz (10 kHz) Usable sensitivity ................................................ 28 µV (S/N: 20 dB) Signal-to-noise ratio ............... 62 dB (analog broadcasting) (IHF-A
network)
CEA2006 Specifications
Power output ................... 14W RMS × 4 Channels (4 and 1 % THD+N)
S/N ratio ................................... .... 91dBA (reference: 1 W into 4 ) Specifications and design are subject to possible modifications without notice due to improvements.
Shop for other car stereos on our website.