Baby Trend Sit N' Stand Double 2.0 DLX Instruction Manual

Important Safety Instructions

⚠️ Please follow all of these instructions to ensure the safety of your child. Keep these instructions for future reference.

⚠️ Failure to follow these instructions could result in serious injury or death. Avoid serious injury from falling or sliding out, always use the safety harness and ensure that the children are properly positioned according to these instructions.

⚠️ Never leave children unattended.

Stroller accommodates 2 children maximum. Do not exceed.

Maximum weight for the front seat: 40 lb (18.1 kg).

Maximum weight for the platform and jump/rear seat: 50 lb (22.68 kg).

The rear stand on platform and jump/rear seat is designed for a child who is at least 2 1/2 years old and not over 40 inches (102 cm) tall.

Children totaling more than 90 pounds (40.82 kg) will cause excessive wear and stress on the stroller and may cause a hazardous unstable condition.

Purses, shopping bags, parcels, diaper bags, or accessory items may change the balance of the stroller and cause a hazardous, unstable condition.

Maximum weight for the storage basket: 5 lbs (2.26 kg).

Maximum weight for the parent tray and child tray: 3 lbs (1.36 kg).

Seat Belt storage pocket: Maximum weight is 1 lb (0.45 kg).

Excessive weight may cause a hazardous unstable condition.

Ensure the stroller is completely opened and locked in place before allowing a child near it.

⚠️ NEVER use the stroller on stairways or escalators.

⚠️ NEVER allow your stroller to be used as a toy.

To clean, use only mild household soap or detergent and warm water on a sponge or clean cloth.

Regularly check your stroller for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.

Discontinue use of stroller if it malfunctions or becomes damaged. Contact customer service for repair or replacement parts.

❗ IMPORTANT! To ensure safe operation, follow these instructions carefully. Keep for future reference.

❗ IMPORTANT! Before assembly and each use, inspect the product for damaged hardware, loose joints, missing parts, or sharp edges. NEVER use if any parts are missing or broken.

❗ IMPORTANT! Adult assembly is required. Keep children away during unpacking and assembly.

Parts List

Before assembling, verify you have all parts for this model:

• Stroller Frame
• Rear Axle Assembly
• Rear Wheels (x2)
• Front Wheels (x2)
• Child Tray (x2)
• Mobile Phone Positioning Parent Tray
• Front Canopy
• Rear Canopy
• Infant Car Seat (sold separately)
• Base (for Infant Car Seat)
• Rear Axle parts: (2) caps and spare parts
• Rear Axle spare parts: (2) caps, (2) pins, (4) washers

*Infant Car Seat Sold Separately. **Wheel styles may vary.

Assembly Instructions

1. Frame Set Up

Pull out and rotate the latch away from the stroller peg. Use one hand to hold the handle and tilt the stroller forward. Push the stroller open firmly with the other hand. Firmly pull upward on the stroller handle to completely open the frame. Note: The frame must fully click into position.

2. Front Wheels

Insert each front wheel into the housing on both sides of the stroller frame. Line up the peg with the housing and firmly push into place. Ensure the black cap faces outwards.

3. Rear Axle

Remove the pin and one washer from both ends of the rear axle. Install the rear wheel with the auxiliary teeth inserting first. Pass the cross bar through the rear wheel and insert the second washer. Place the pin horizontally into the hole of the axle bar and then rotate into a vertical position. Align the tabs on the cap with the holes on the wheels. Push the cap into the wheel to close the axle assembly. Press firmly with your palm to press the cap in completely. Repeat for the other side. Place the rear legs over the axle with wheels and apply pressure on both sides. Ensure both sides lock into place. Pull on the front and rear wheels to ensure all are securely attached. Never use the stroller if wheels do not lock into place. For assistance, contact customer service.

4. Child Tray

⚠️ The child's tray is not a restraint device; always secure your child with the seat belt. Do not lift the stroller by the child's tray. Use care when the child is in the stroller and securing the front tray. Do not place hot liquids or more than 3 lbs (1.36 kg) in the child tray, as this could cause serious burns or unstable conditions.

To attach the child tray: Push the tray downward and onto each side of the front armrests until both sides snap into place. Check that the tray is secured by slightly pulling it upwards.

To access the child seat: Pull one release lever on the underside of the child tray and lift upward. Either side can rotate up to access the seat.

To remove the child tray: Pull both release levers located on the underside of each side of the tray and lift upward. Repeat these steps for the rear child tray.

5. Mobile Phone Positioning Parent Tray

⚠️ Do not place hot liquids or more than 3 lbs (1.36 kg) in the parent tray. Serious burns or unstable conditions can result.

⚠️ Be careful when folding the stroller to prevent damage. Ensure all accessories, mobile phones, diaper bags, or purses are removed before folding. Failure to remove items may result in damage to the stroller or the items. Baby Trend is not liable for any damage.

To attach the parent tray: Insert the hole on the parent tray into the pin on the handle. Align the opposite side of the tray and press down until you hear a "click". Pull up on the tray to verify proper installation. Be careful not to pinch your fingers when installing.

Mobile phone positioner: Align the mobile phone with the clip and insert it through the grips. Push the phone all the way down into the positioner. Note: The positioner may not accommodate all mobile phones or devices. Do not use as a secure holder when the stroller is not in use, or if your phone is loose or too large.

To remove the parent tray: Pull outward on one end of the tray while lifting upward.

6. Front Canopy

To attach the canopy: Align both sides of the canopy clips onto the plastic tabs. Slide clips forward to lock into place. Ensure the canopy is completely snapped into position.

To open the canopy: Push the front bar forward while holding the back of the canopy. The canopy moves forward or backward and includes a visor for shade.

To close the canopy: Pull the front of the canopy back towards the stroller handle.

To remove the canopy: Slide both canopy clips backward to remove.

7. Rear Canopy

If received unattached: Line up the male fittings of the lower connection with the female fittings on the handle frame and push inward. To attach: Pinch the straps and insert into the tray slots. Hook all three canopy straps to the corresponding tray tab. Ensure all fabric panels are attached to their corresponding tab. Secure the canopy sides with the bands. Fasten each hook and strap onto the stroller frame. Repeat for the other side.

To remove the rear canopy: Repeat the steps above to undo the canopy. Then press both snap buttons of the rear canopy to remove.

8. Basket Access

Securing the Basket Straps: If straps are not assembled, locate the (4) types of straps. Locate the cording on the front edge of the basket and loop it over and hook it onto the tab under the frame. Loop the two basket straps together over the stroller frame. Ensure the strap is inserted through the rear footrest. On the rear basket, ensure the strap is inserted through the slot. Repeat for the other side.

Check Straps: Ensure all straps with snap closures are attached correctly.

Basket Access / Flip-Up Leg Rest: Lift the leg rest to access the storage basket from the front side. Lift the leg rest from the edge, and always close the storage basket front access when not in use.

9. Rear Brakes

⚠️ Always set brakes when the stroller is not being pushed to prevent it from rolling away. NEVER leave the stroller unattended on a hill or incline.

To engage rear brakes, apply downward pressure to the brake levers located on the rear axle. The stroller may require slight forward or rearward movement to engage the brake. Check that the stroller will not move once brakes are applied. To release, gently lift up on the brake levers.

10. Secure the Child

⚠️ Avoid serious injury from falling or sliding out. Always use the safety harness.

[Strangulation Hazard] Child can strangle in loose safety harness. Never leave child in seat when safety harness is loose or undone.

The 5-point harness shoulder straps have multiple positions. Select the position that places the shoulder strap level with, or below the top of the child's shoulder.

To secure the child, place the safety harness around the child's waist and over the shoulders. Place the crotch strap between the child's legs. Insert the male end of each shoulder/waist belt into the crotch buckle. Tighten all buckles for a proper fit.

To make adjustments on the front seat: Push the button on the center clasp to release all harness straps. To re-thread: Unhook the shoulder straps. Use the slit in the back of the front seat. Select the position that places the shoulder strap level with, or below the top of the child's shoulder.

To make adjustments on the rear seat with seat pad: To re-thread: Unhook the shoulder straps. Use the hook and loop in the back of the rear seat. Select the position that places the shoulder strap level with, or below the top of the child's shoulder. If needed: Adjust the crotch buckle to face the front of the stroller when using the rear seat. Use the strap and anchor under the seat to RESET the crotch buckle.

11. To Recline Seats

⚠️ The upright position should be used only for a child at least 6 months old.

To recline the seat, press the clip ends together to release and pull down. To place the seat into an upright position, press the clip ends together while holding the end of the strap. Push the clip upwards to secure into the desired position. Repeat for the rear seat. Adjust the safety strap as needed.

12. Infant Car Seat

⚠️ Avoid serious injury from falling or sliding out; always use the Infant Car Seat harness.

Infant car seat(s) sold separately (visit babytrend.com for compatibility chart).

ATTENTION: CS01 EZ-Lift, CS02 EZ-Lift PLUS, and CS03 EZ-Lift PRO Dual Infant Car Seats must attach to the stroller's front and rear seat connectors. IMPORTANT: For use of two car seats or any dual seating combination, both seats must have weight in them. Always seat 2 children at the same time.

A Single Infant Car Seat must attach to the front seat connectors only. This feature requires child tray and seat back adjustment to the most reclined position. Canopy adjustments must be done accordingly. Refer to step 11 for seat position adjustments.

⚠️ DO NOT use a single car seat in the rear seat position. DO NOT use the rear seat without fabric installation.

Car Seat Connections: Recline both seats as shown on step 11. Align the car seat connection to the stroller connectors. Both car seats must be rear facing.

Carefully rest the car seats lower rear against the angle point of the tray. Latch the connection into the stroller frame. Press down firmly for the click. ALWAYS ensure the car seat is properly connected and locked onto the stroller before each use by lifting up on the car seat handle.

IMPORTANT: REAR SEAT: Always use short clips to secure the infant car seat to the stroller. Thread between canopy and stroller frame to attach. Reverse to remove and store in the side pocket.

Removing the car seat: Set handle to the carry position. Squeeze the release handle located at the top-rear of the car seat and lift away from the stroller. Applies to both front and rear.

13. Jump Seat

⚠️ The rear platform and jump seat are designed to accommodate a child who is at least 2 1/2 years old, has good balance and coordination, and is not over 40 inches tall.

Rear Seat/Jump Seat: To use the jump seat, remove the rear child tray, rear canopy, and rear seat.

To remove the rear child tray: Refer to Fig. 4d.

To remove the rear canopy: Reverse step 6.

To remove the rear seat: Detach the recline strap from the frame by folding and sliding the strap through the "D-ring" located on the end of the strap. Remove any remaining straps attached to the stroller frame. Place stroller on its side. Remove attachments underneath the rear seat.

To reattach the rear seat: Reverse the steps above.

⚠️ Do not use the jump seat at this point. The harness strap must be adjusted.

14. Using the Rear Jump Seat

⚠️ The rear platform and jump seat are designed to accommodate a child who is at least 2 1/2 years old, has good balance and coordination, and is not over 40 inches tall.

NOTE: The rear seat should be removed. The crotch buckle must face the stroller rear during use of the jump seat. Use the strap and anchor under the seat to RESET the crotch buckle.

Have the child sit on the jump seat facing backwards. Secure the child with the jump seat 3-point harness. Put the seat belt around the child's waist and buckle to the crotch strap. Adjust the seat belt to be snug around the child's waist.

TO RELEASE: Push the button on the center clasp, and all harness straps will release.

15. Using the Platform

⚠️ The rear platform and jump seat are designed to accommodate a child who is at least 2 1/2 years old, has good balance and coordination, and is not over 40 inches tall.

First, engage the rear brakes. Place the child in a rear-facing standing position. Ensure the child holds the frame with both hands at all times.

Position the child on the platform on the back of the stroller. Ensure the child is facing forward and hands are holding the frame. Secure the stand feature safety belt behind the child and engage the buckle. Ensure the child's feet are fully on the platform at all times.

16. To Fold Stroller

⚠️ Be prudent when folding and unfolding the stroller to prevent finger entrapment.

[Caution] Do not allow children near the stroller while folding and unfolding.

⚠️ Be careful when folding and unfolding to prevent damage. Remove all accessories, mobile phones, diaper bags, or purses before folding. Failure to remove items may result in damage to the stroller or items. Baby Trend is not liable for any damage.

Always push the canopy forward away from the handle before folding the stroller. To fold the stroller, pull the stroller back to position the front wheel as seen, and engage the brakes. Slide the thumb latch to the left. Squeeze the pull trigger while pushing forward on the handle.

Once the stroller begins to fold, push upward on the handle. Continue pushing the handle upward and use the fold assist strap to close the stroller.

Rotate the latch to lock the stroller. Ensure the stroller peg engages with the latch. Refer to Step 1 for unfolding sequence. All wheels can remain assembled during folding and unfolding.

Maintenance

Front Wheel - Maintenance

If replacing the front wheel, press the pin located behind the wheel hub. Pull the wheel out from the hub.

Rear Wheel - Maintenance

If replacing the rear wheel: Press the release pin and pull the wheel out.

Seat Pad Cleaning

To clean the seat pad, use only mild household soap or detergent and warm water on a sponge or clean cloth.

Other Checks

Regularly check your stroller for loose screws, worn parts, torn material, or stitching. Replace or repair parts as needed.

Warranty Information

DO NOT RETURN YOUR PRODUCT TO THE STORE. PLEASE CONTACT BABY TREND® FOR REPLACEMENT PARTS, SERVICE AND REPAIR.

The Baby Trend® warranty covers workmanship defects within 1 year of purchase. Any product subjected to misuse, abuse, abnormal use, excessive wear and tear, improper assembly, negligence, environmental exposure, alteration, or accident, or with an altered/removed serial number invalidates all claims. Any damage to property during installation is the sole responsibility of the end user.

Customer Service Department can be contacted at 1 (800) 328-7363 Monday through Friday between 8:00 a.m. and 4:30 p.m. (PST). Return Authorizations are required prior to returning product(s) to Baby Trend®. Please visit http://babytrend.com/pages/limited-warranty for complete warranty details.

Baby Trend, Inc. 13048 Valley Blvd. Fontana CA 92335

Phone: 1-800-328-7363 (8:00 a.m. ~ 4:30 p.m. PST)

Website: www.babytrend.com