SONGMICS Plastic Cube Storage
Model: LPC905
Parts List
- A: Plastic Panels (30 x 30 cm) x 16
- B: Plastic Panels (40 x 30 cm) x 40
- C: Plastic Panels (30 x 30 cm) x 16
- D: Connectors x 52
- E: Wire Door Panel x 4
- F: Mallet x 1
- G: Anti-tip Kit (Screws) x 2
Assembly Instructions
Step 1: Panel Orientation
Distinguish the front and back of the plastic plates. Ensure the side marked with the SONGMICS logo faces outward when assembling connectors.
Step 2: Initial Frame Assembly
Insert the corners of the panels (B) into the slots of the connectors (D). Ensure all panel wires are fully inserted into the connectors.
Step 3: Building Layers
Continue assembling panels (B) and connectors (D) to form the base layers of the storage unit.
Step 4: Adding Vertical Structure
Attach panels (A) vertically using connectors (D) to build the cube structure layer by layer.
Step 5: Expanding the Unit
Continue adding panels (B) and connectors (D) to expand the unit horizontally and vertically as per the diagram.
Step 6: Installing Door Panels
Insert the wire of the door panel (E) into the inner slot of the connectors (D). Ensure the wire is fully inserted.
Step 7: Assembling Doors per Layer
Assemble the door panels (C) after each layer is finished. Do not wait until the entire unit is assembled.
Step 8: Securing Connectors
After each layer is fully assembled, firmly press each connector and tap with the mallet (F) to ensure they are installed tightly.
Step 9: Adding More Layers
Assemble the remaining layers according to the previous steps.
Step 10: Final Securing
Once the entire product is assembled, use the mallet (F) to repeatedly hit the connectors to increase the stability of the unit.
Step 11: Wall Mounting
Use the included anti-tip kit (G) to attach the unit to the wall to prevent personal injury from accidental tipping.
Warnings
- Children are not allowed to assemble the product. Keep small parts out of reach of children.
- Children are forbidden to climb or play on the product to avoid serious injury.
- The product must be attached to the wall with the included anti-tip kit.
- Read instructions carefully and use the product accordingly.
- If any parts are defective or missing, cease assembly immediately and contact SONGMICS.
- Unauthorized changes or modifications may affect safety.
