GIMA Safety Belts

Product Description

The safety belt is primarily composed of polyester straps and a buckle. The materials used are typically polypropen or polyester.

Intended Use

The safety belt is used to secure a patient and prevent them from sliding or falling from a stretcher. It is intended for use with stretchers and is not supplied sterile.

Storage

Store in a cool, dry, and non-corrosive environment.

Cleaning and Maintenance

Keep clean as routine. Wipe with 75% alcohol solution.

Transport

The safety belt can be transported using standard transportation methods.

Durability and Shelf Life

Shelf life is 8 years. The duration of use is less than 4 hours.

Usage Instructions

Models B2, B4, B8, B9:

To secure: Thread the straps through the handle on the backboard and around the patient and stretcher. Connect the male connector to the female connector until a click is heard, then tighten securely.

To release: Press the side of the buckle and pull the two parts apart.

Model B10:

To secure: Place the belt's two hooks onto the stretcher's pins and around the patient and stretcher. Connect the male connector to the female connector until a click is heard, then tighten the belt securely.

To release: Press the side of the buckle and pull the two parts apart.

Model B11:

To secure: Thread the straps through the handle on the backboard and around the patient and stretcher. Connect the ends by pushing the metal tongue into the buckle until a click is heard, then tighten the buckle securely.

To release: Press the button located centrally on the top of the buckle and pull out the metal tongue from the buckle opening.

Model B12:

To secure: Thread the straps through the handle on the backboard and around the patient and stretcher. The shoulder straps should be around the patient's shoulders and the head side of the stretcher.

To secure: Thread the straps through the handle on the backboard and around the patient and stretcher. Connect the ends by pushing the metal tongue into the buckle until a click is heard, then tighten the buckle securely.

To release: Press the button located centrally on the top of the buckle and pull out the metal tongue from the buckle opening.

Precautions and Warnings

1. Always keep clean (including disinfection).
2. Any serious incidents occurring in connection with the device should be reported to the manufacturer and the competent authority in the Member State where the user and/or patient is located.

Symbol Index

• LOT: Lot number
• UDI: Unique device identifier
• REF: Product code
• MD: Medical Device
• CE: Conformity with European regulations
• NON STERILE: Not sterile
• i: Consult instructions for use
• !: Caution: read instructions carefully

Manufacturer Information

JIANGSU RIXIN MEDICAL EQUIPMENT CO.,LTD. No.427 Yangjin Road, Jinfeng, Zhangjiagang, Jiangsu Province, CHINA

SUNGO Europe B.V., Fascinatio Boulevard 522, Unit 1.7, 2909VA Capelle aan den Ijssel, The Netherlands

Gima S.p.A. Via Marconi, 1 - 20060 Gessate (MI) Italy