User Guide for XPG models including: HURRICANE MAG 120, Mag 120 Argb PWM Magnetic Fan, Mag 120, Argb PWM Magnetic Fan, PWM Magnetic Fan, Magnetic Fan, Fan
29 nov 2024 — Quick Start Guide. HURRICANE MAG 120. ARGB PWM MAGNETIC FAN. Fan x4. 6-32# Screw x12. M3 Screw x12. Short Screw x16. Fan-to Fan. Extension Cable. X1. Controller.
Quick Start Guide HURRICANE MAG 120
ARGB PWM MAGNETIC FAN
Package Content
Fan
6-32# Screw
x4
x12
Overview
M3 Screw x12
Short Screw x16
Fan-to Fan Extension Cable
X1
Controller with Power
Cable x1
25mm
120mm
Magnetic Connector (Male)
Controller with Power Cable
3-Pin ARGB Connector 4-Pin PWM Connector Reset Header
Fan-to-Fan Extension Cable
7-Pin Connector (Male)
120mm
Magnetic Connector (Female)
Controller
7-Pin Connector (Female)
7-Pin Connector (Female)
Quick Start Guide HURRICANE MAG 120
ARGB PWM MAGNETIC FAN
Specification
Dimensions Bearing Type LED Profiles Connector Lighting Connector Fan Direction Mode Speed (RPM) Maximum Air Flow Maximum Static Pressure Maximum Noise Level Fan Rated Voltage LED Rated Voltage Operating Voltage Fan Starting Voltage Fan Rated Current LED Rated Current Fan Protection MTTF Power Dissipation
120 x 120 x 25mm
Rifle Bearing
Addressable RGB LED
4-Pin PWM
5V 3-pin ARGB
Standard (Counterclockwise) Reverse (Clockwise)
2000 RPM
2000 RPM
54.82 ± 10% CFM
49.27 ± 10% CFM
2.74mm-H2O
3.29mm-H2O
23.36 dBA
31.36 dBA
DC 12V
DC 5V
DC 7V~12V ± 5%
DC 7V
0.2A (Max)
0.86A (Max)
Auto-Restart
160,000 Hours / 40°C
1.56-2.4W
Quick Start Guide HURRICANE MAG 120
ARGB PWM MAGNETIC FAN
Fan Installation
Magnetic fans
1. Connect the first fan in the chain to the fan controller. Align the fan's pin with the connector on the controller, then firmly push the controller up to secure the connection.
2. Link the magnetic connectors of the fans together. Make sure the connectors are oriented correctly.
Quick Start Guide HURRICANE MAG 120
ARGB PWM MAGNETIC FAN
Cable Connection
1. Connect the 3-Pin ARGB connector to the motherboard's ARGB header.
2. Connect the 4-Pin PWM connector to the motherboard.
3. Connect the case's Reset Switch to the fan's Reset Header for easy controller switch (after connection, you can click the reset button to change fan direction).
RESET SW
Controller
Connect the controller to your fans. Change the fan direction by pressing the switch. Wait a few seconds for the LED indicator to change to the next color.
Interlocking Error Prevention Design 3. With an additional Fan-to-Fan extension cable, you can easily adjust your fan connection to suit any
scenarios you want.
Switch LED Indicator Description
Blue
Standard (Counterclockwise)
Red
Stop
Green
Reverse (Clockwise)
Restricted substance and its chemical symbols
Pb Hg Cd Cr (Vl) PBB
PBDE
SJ/T
: GB/T
: GB/T
( : EU RoHS)
Learn More
Adobe PDF library 17.00 Adobe Illustrator(R) 24.0