D26 User Manual

Product Overview

1. Product Operation

1-1 Physical button operation

Short press:

1. Enter function menu from home page
2. Return to previous level/home page
3. Wake up the screen when it is off

Long press: Switch on/off

1-2 Touch operation

1. Click touch: Go to the next menu/confirmation.
2. Long press touch: Long press in the main screen to change the dial.

Caution:

• If you experience discomfort or skin irritation while wearing your smartwatch, then we recommend that you try cleaning your device. Sometimes it is residue or foreign matter that builds up substances around your device that may damage your skin.
• It is also possible that you are not wearing your watch correctly. We recommend ensuring that you clean and adjust your watch regularly to make it more comfortable to wear.
• If your skin becomes irritated while wearing your watch, avoid wearing it and wait two to three days to see if your symptoms subside.
• If symptoms persist or worsen, consult your doctor.
• If you have eczema, allergies or asthma, consult your doctor.

2. Charging and activating the watch

• When using the bracelet for the first time, it needs to be charged to activate it.
• Use the included magnetic charging cable to attach it to the watch charging contacts, and the USB-A connector on the other end of the charger is connected to a USB charging adapter.
• To ensure the safety of your family and property, this product is not equipped with a power adapter. When charging, you can use a computer USB port or choose a power adapter with an output of not more than 5V 1A. Please purchase the power adapter through regular channels, do not use poor quality, counterfeit power adapters, which may cause bursting or fire, which may cause damage to the bracelet or cause other accidents.
• When the bracelet is switched off, it will turn on automatically when you start charging.
• When the bracelet is extremely low in power, you need to wait for about 2 minutes before the charging animation is displayed or there is a response.
• Do not use mobile power to charge it.
• Do not charge it in a humid environment.
• Please use a clean flannel to clean the magnetic charging hole on the back of the watch.

3. Wearing Instructions

• Do not wear it too tightly for everyday wear.
• Please wear the watch on your wrist about one finger's width from your wrist bone and adjust the strap to a comfortable size.
• If the watch is worn too loosely, the data collected by the heart rate/blood oxygen sensor may be affected.

Main Functions Of The Bracelet

1. Touchscreen Operation

• -Swipe up: view information
• -Swipe down: control panel
• -Swipe left/right (cycle): switch function menu
• -Quickly change dial: Long press the main interface for 3 seconds, then you can slide left or right to choose the dial of the bracelet.
• After entering the function menu, you can operate according to the prompts, and press the button to return to the main interface.
• Right slide on other pages to go back to the previous page.

2. Health and Sports

• Sports: You can enter the sports item selection interface through the main menu "Training" of the wristband. The wristband provides 25 sports items.
• Step Count / Distance / Calorie: You can view steps, distance, calories and other data through the main menu "Status" of the wristband, or on the first interface that appears when you swipe right on the main interface of the wristband. You can also synchronize data to the GloryFit App to view sports data.
• Heart Rate: You can enter the heart rate test through the main menu "Heart Rate" of the wristband, or on the second interface that appears when you swipe right on the main interface of the wristband, and the test will be automatically started after you enter it. You can set Automatic Test by choosing "App-> Device-> Heart Rate Settings". After data are synchronized to the App, continuous test reports will be generated.
• Blood Pressure: You can enter the blood pressure test through the main menu "Blood Pressure" of the wristband, or on the fourth interface that appears when you swipe right on the main interface of the wristband, and the test will be automatically started after you enter it. Keep your mind calm and your arms flat on the table during the test. Note: This blood pressure test value is for reference only and should not be used as a basis for medical judgment.
• Blood Oxygen: You can enter the blood oxygen test through the main menu "Blood Oxygen" of the wristband, or on the third interface that appears when you swipe right on the main interface of the wristband, and the test will be automatically started after you enter it. You can set Automatic Test by choosing "App-> Device-> Blood Oxygen Settings". After data are synchronized to the App, continuous test reports will be generated.
• Sleep: The wristband automatically checks sleep status, which can be monitored as long as the wristband is worn during sleep. You can view it through the main menu "Sleep" or App.
• Weather: You can check the weather through the main menu "Weather" of the wristband. The weather can be updated if the wristband is connected to the mobile phone.

Other Functions

• Music Control: You can enter the music control interface through the main menu "Music" of the wristband, to control the Pause of playback, Previous and Next music. Keep the wristband connected to the mobile phone during control.
• Breath Training: You can enter the breath training mode through the main menu and set the duration and speed of breath.
• Female Health: The female menstrual cycle reminder can be set by choosing "App-> Profile->Physiological Cycle". After the setup, the "Female" item will appear in the main menu of the wristband. Note: Only when the personal information is set to "Female" will the "Menstrual Cycle" be displayed on the App and wristband.
• Message: You can view the message content through the main menu "Message" of the bracelet OR swipe up in the main interface of the bracelet. When viewing messages, if there are multiple messages, you can tap on a single message and then view the details OR delete the content; if the single content is too long, you can single tap to flip the page to view. This function only supports viewing, does not support editing and replying.
• More: Enter through the main menu "More". You can use the Stopwatch, Timer and Find Mobile Phone functions.
• Call Reminder: It is set by choosing "App -> Device -> Phone". There is a reminder only when the wristband is connected to the mobile phone.
• Alarm Clock: The alarm clock is set in the App. You can set three sets of alarms by choosing “App->Alarm".
• Remote Camera: You can control the mobile phone camera to take photos remotely by choosing "App->Device-> More Settings-> Shake to take picture".

APP download, login, pairing and setup

1. APP download

Search GloryFit in App Store, Google Play or download and install by scanning the QR code below; Mobile phone system requirements: iOS 9.0 or above, Android 6.0 or above.

Note: Please feel free to download and install this app, this app will strictly protect user information and will not be used for any other purpose! This app does not charge any fees!

2. Login

1. Enter your email
2. Click to get the verification code
3. Verification code received after you enter email (Please receive the email with subject as [GloryFit])
4. Click for login

Note: You can also log in GloryFit App directly and synchronously by Apple ID, Facebook or WeChat account.

Note: To open the GloryFit app, please agree to the User Agreement and Privacy Policy, which are integral to this app.

STATE: Please fill in your personal information truthfully as prompted (Or after logging in, click on 'My' > click on your avatar > complete your personal information), as this will affect the accuracy of all data monitoring during the use of the fitness tracker.

3. Enter personal information

Please fill in your personal information truthfully as prompted (Or after logging in, click on 'My' > click on your avatar > complete your personal information), as this will affect the accuracy of all data monitoring during the use of the fitness tracker.

4. Set Up

Note: Please keep your mobile phone's Bluetooth on during use to ensure that the device and your mobile phone's Bluetooth remain connected.

4-1 Relationship between permissions and devices

• Background Activity Permissions: affects the background use of certain functions and the stability of Bluetooth connection, such as: incoming calls, SMS, app message reminder, weather push and so on.
• Location information: Ensure that the device can properly connect to your mobile phone's Bluetooth connection.
• Camera privileges: Ensure that functions such as changing personal information avatars, changing dials, etc. work properly.
• Phone permissions, dialling permissions, address book permissions, call log permissions: Receive alerts for incoming calls and reject calls with one click.

4-2 Set up---Android:

1.Setting path for Background Activity Permissions

Path 1: Log in to your account > Select your phone model > Tap "Go to Set" in the bottom left corner

Path 2: Go to 'Phone Manager'/'phone's 'Settings'>APPs & services>Launch manager

Path 3: Log in to your account >Go to 'My'>Permission settings>Background Activity Permissions>Go to set

Then Scroll down to find GloryFit APP > Set it to off - Go to the Manage manually interface > Set all the options in the picture to on (Auto-launch, Secondary launch, Run in background)

Note: Add GloryFit to its whitelist in Security Centre or Phone Settings; If you have installed related app hibernation tools in your phone, such as Green Guardian, Self-Start Manager and other apps, you need to remove GloryFit from the list of these hibernation apps.

2. Setting paths for other usage permissions

Path 1: Log in to your account >Go to 'My'>Permission settings> Turn on all permissions/functional permissions you need to use

Path 2: Phone's 'Settings'>APPs & services>Apps/Permission manager-Apps>Find and Click GloryFit APP>Turn on all permissions/functional permissions you need to use

4-3 Set up---Apple IOS:

1. Based on the requirements of Apple IOS system for APP and the characteristics of its own system, the watch APP under Apple IOS system can't set the background running privileges.
2. IPHONE's bluetooth system settings have a allow message push, this must be opened.
3. After the APP turns to run in the background, it will hibernate by default in the IOS system, then the weather push, music control and so on are not available at this time, and the weather push will show a "?" etc.

5. Adding Devices and Pairing

Open and login GloryFit APP>Device>Select Device D26 Pairing/ Scan Device QR Code Pairing (Keep your mobile phone and device close to each other when connecting.)

Remarks: In the binding process, in the case of popup window to request for Bluetooth pairing, etc, please click and agree.

When the mobile phone is connected to more than one bluetooth device, sometimes there will be a delay in bluetooth connection or can't be connected back automatically, this time you need to turn off and then turn on the bluetooth control of the mobile phone, the bluetooth will start from the last connected device of the mobile phone to connect back one by one;

• If it still doesn't connect back successfully, please try to unbundle it and let the watch pair with the mobile phone again to reconnect;
• If the device is not found during the process of adding the device, or the device can not be connected during the process of using the device, please reset the device in the operation interface of the watch ("Settings - Reset"), and then add the device again.
• If you still can't find the bracelet, please exit and open the APP again.

APP Interface

1.Watch Face

1-1 Changing dials from online dials

APP - Device - Dial Settings - Dial Centre

1-2 Custom Dial

APP--Device--Dial Settings--Custom Dial--Tap the dial pattern on the upper left corner--Select the picture--Take a picture, album--Crop the picture--Select the font colour--Sync the dials

Note: Only one of the online dials and custom dials can be used, they will overwrite each other on the watch side.

2. Heart rate monitoring settings

2-1 In APP--Device--Enable heart rate automatic monitoring, it will record every 10 minutes.

2-2 In APP homepage - click heart rate record, you can have a detailed data view.

3. Blood Oxygen settings

In APP--Device--Enable blood oxygen automatic detection, the time period and duration can be customised.

In non-high sea wave, low oxygen and other special environments, it is generally not recommended to turn on the automatic monitoring of blood oxygen, which will increase the power consumption and reduce the standby time; instead, a single measurement is performed on the watch side;

Blood oxygen value 95-99% is normal, 90%-95% is hypoxia, 90% is hypoxia;

4. Incoming Call Settings

After setting permission in APP - Device - Incoming Call Alert, there will be an alert on the bracelet side when a call is accessed.

5. SMS alerts

After setting permission in APP - Device - SMS Alerts, there will be an alert on the bracelet side when a text message is received.

6. APP Reminder

Tick the name of the APP that needs to receive notifications in APP - Device - APP Reminder.

7. Sedentary Reminder

Choose whether to enable this function in APP--Device--Sedentary Reminder, you can set the time period, the reminder interval length, and the no-disturbance period of lunch break.

After enabling the function, there will be a reminder on the end of the bracelet.

This function can only be set in APP to enable or disable, there is no such function option in the bracelet terminal.

8. Smart Alarm

Choose whether to enable this function in APP--Device--Smart Alarm, you can add 3 alarms.

After enabling this function, there will be a reminder on the end of the bracelet.

This function can only be enabled or deactivated in APP, there is no option for this function in the bracelet.

9. Wrist Lift Screen

Choose whether to enable this function in APP--Device--Wrist Lift Screen, this function can be set in the end of the bracelet.

10. Do Not Disturb Mode

Choose whether to enable this function in APP--Device--Do Not Disturb Mode, which can be set on the end of the bracelet.

The function can set the time period individually, which is suitable for nap, meeting and other scenes.

11. More Settings-Shake to take photo

Choose whether to enable this function in APP - Device - More Settings - Shake to take photo, you can control the shutter of the camera by shaking the bracelet.

12. More Settings - Find Device / Find Mobile Phone

In APP--Device--More Settings--Find Device, there will be a reminder on the end of the bracelet;

Choose whether to enable this function in APP - Device - More Settings - Find Mobile Phone, after enabling it, you can add the function of finding mobile phone on the bracelet.

13. Time System

You can select 12-hour / 24-hour time system in APP - Device - More Settings - Time System.

14. Device Language

In APP - Device - More Settings - Device Voice, you can select the applicable language individually or let the watch language follow the mobile phone system language.

Default: Follow system

15. Firmware Update

If checking for an updatable software version, users can upgrade online (OTA) by themselves.

16. Clear data

This function will synchronously delete all data on the APP side and the bracelet side, please use with caution!!!!

17. Unit Setting

In APP--My--Unit Settings, you can set the temperature, length, weight and other units of different systems.

18. Training schedule, goal setting, weekly data

In APP--My--you can set the training schedule and goal setting, and there will be a reminder on the watch side; if you are a person who likes sports, you can make a good training plan for yourself here;

In APP--My--Weekly report data you can check the data of steps, calories, mileage, sleep, heart rate, blood pressure and so on for a week;

19. Physiological cycle

You can set the time of menstruation in APP--My--Physiological Cycle, and you can view the corresponding calendar after clicking Start;

At the same time, only if the personal information is female, there will be "female" function option in the bracelet;

20. Third Party Programme

In APP--Device--More Settings--Find Device, there will be a reminder on the end of the bracelet;

Choose whether to enable this function in APP - Device - More Settings - Find Mobile Phone, after enabling it, you can add the function of finding mobile phone on the bracelet.

21. Frequently Asked Questions, Feedback

If you have any other questions, you can check the FAQ, if you still can't get a solution, you can inform the developer of the problem through the feedback; you can also contact our customer service staff through the customer service phone OR email.

FAQ

1. App can't search the device?

• *Please try to press the device button first, if the screen is not lit, you can connect the device to the charger for charging to make sure there is power.
• *If the device is connected by another mobile phone, turn off or unbind the Bluetooth of that mobile phone first, and then use the current mobile phone to search and bind.
• *If it is an iPhone mobile phone, try to ignore the device in the system Bluetooth devices, setup path: System Settings → Bluetooth → Click the right icon ⓘ → Ignore this device.
• *If the device is powered and still cannot be searched after the mobile phone is close, try to restart the mobile phone Bluetooth.
• *If you are an Android mobile phone and cannot search for the device, please check whether the information location (GPS location service) of your mobile phone is off; if it is off, please go to the system setting interface to turn on the location, and then search for the device again.

Note: If after the above operation, it fails to solve. It is recommended to try to restart the mobile phone.

2. Device connects and disconnects repeatedly?

• * Whether there is a cover between the device and the mobile phone. The human body or metal jewellery worn, etc. will interfere with the Bluetooth connection stability.
• *Please check whether the device power is sufficient.
• *If it is an iPhone, try to ignore the device in the system Bluetooth device, setup path: System Settings → Bluetooth → Click the right icon → Ignore this device.
• *If it is an iPhone, check if the phone is bound to too many Bluetooth devices, please ignore several devices in the system Bluetooth settings.

Note: If it fails to be solved after the above operations. It is recommended to try to restart the Bluetooth or mobile phone.

3. Android can't run in the background for a long time, no reminders for messages?

• *Due to the limitations of Android system, when this app is running in the background, the incoming call, message reminder and GPS movement function may not work properly, you need to turn on the power consumption protection and self-starting system permissions.
• *Power consumption protection setting: Due to Android 6.0 updated power management method, when the user does not interact with the app, the system will decide whether the app is inactive or not, and determine whether the app needs to be cleaned up to extend the battery life, if you want to use the app for a long time and not to be cleaned up, you need to set the power consumption protection on the user's own initiative.

4. App messages can not be pushed to remind (the device supports the message push function)?

• * Make sure that in the notification reminder interface of the app, the apps that need to be reminded are ticked to turn on the function.
• *Check whether the Do Not Disturb mode of the device is on. (Some devices have this function)
• *Find the right to use the notification of the App that needs to be reminded in the system settings of the mobile phone to allow the notification.
• *Make sure there is an app message box popping up in the notification bar of your phone when there is a message.
• *The phone call and message push function requires the phone to keep Bluetooth on all the time, please do not turn off the phone's Bluetooth.
• *If this happens to iPhone, please check whether the Bluetooth of the phone has been paired with the device (in the system Bluetooth devices, see the corresponding device name followed by an exclamation mark).
• *Android mobile phone, please check whether the app has been added to the whitelist; need to open the background permissions.

5. No reminder for SMS?

• *Confirm contacts/address book permission is enabled
• *Confirm that the SMS permission is turned on

6. Do I need to keep my mobile phone's Bluetooth on when I wear the device?

• *Pedometer, sleep monitoring, heart rate detection, blood oxygen detection, blood pressure detection, sleep, stopwatch, timer, alarm clock, sedentary reminder and other functions do not need to open Bluetooth all the time.
• You only need to wear the device when you workout, open the App when you finish the workout, the device and mobile phone will be connected automatically, and you can check the data after the synchronisation is finished.
• * Incoming call reminder, App notification reminder, find mobile phone, find device and other functions, because the mobile phone needs to be connected to the device all the time, so you need to turn on the Bluetooth of the mobile phone all the time.

7. How to synchronise data?

• *When Bluetooth is turned on and you open the App, it will automatically connect to the device for data synchronisation, or you can pull down the data list in the main interface of the App for manual synchronisation.
• *If the sync prompts a connection failure, you can try the following methods: first of all, you can pull down the main interface for manual synchronisation, if it is invalid, please close the App background processes, and then re-enter the App.
• If it is not effective, please close the background process of the App and re-enter the App. *If you still can't sync, please close and open the Bluetooth of the mobile phone or restart the mobile phone.

8. Why is the weather data on my device not displayed or not updated?

• *Some devices support the weather function, some do not.
• *The device itself will not update the weather data automatically, you need to connect the device to the app, the app will automatically synchronise the weather data to the device. If your device supports the weather function but cannot sync the weather, please try as follows:
• *Allow App location and networking permissions.
• *You can manually pull down the sync data on the App homepage and wait for the data sync to complete, then the weather data can be synced to your device. (You can click on the weather interface to check whether the weather data is acquired)

9. What should I do if my device fails to upgrade?

• *Please keep your device battery level above 50% when upgrading your device. If the battery level of your device is lower than 50%, you can't upgrade your device.
• *After the device upgrade fails, the app will automatically try to connect. If the automatic connection fails, you can manually pull down the sync data on the main page, which will re-trigger the device connection.
• * Some devices fail to upgrade will have a two-minute waiting time (during which the device does not respond) before the connection is reactivated.

10. Device can not be charged?

• *First of all, please make sure the USB port (PC or other power supply device) can be powered normally.
• *Check if the USB port is plugged in backwards.
• *Charging contact whether there is dirty rust and corrosion, etc., USB interface and charging head of the full contact in order to charge successfully.
• *When the device has very low power, you need to wait for about 2 minutes before the charging animation is displayed or there is a response.

11. Why is there no data for blood oxygen monitoring?

• *If you have not turned on the automatic test, you need to tap into the icon for manual measurement, keep a static sitting posture, put your hand flat on the desktop, breathe smoothly, the initial value will appear in 10-15 seconds, and the final measurement will appear in 40-45 seconds of continuous measurement, accompanied by the end of the vibration reminder;
• *You can set up automatic test by selecting "App-> Device-> Blood Oxygen Settings" (App-> Device-> Blood Oxygen Settings), and record the measurement value and form the curve, but turning on the continuous monitoring of blood oxygen will reduce the power usage hours;

If you still have problems, please contact us for after-sales service. Reference values: 95-99% normal, 90-95% hypoxic, 90% hypoxic blood oxygen values

12. Does it support recording data of sporadic naps such as naps?

• *Not supported for the time being.
• *Sleep monitoring is based on the user's heart rate, movement and other indicators to determine whether to start to enter the sleep state, and the duration of more than 3 hours before it starts to record and make analysis data;
• *Sleep data is not monitored during daytime. The default sleep monitoring period is from 18:00 pm to 18:00 pm the next day, but the sleep start monitoring period is from 18:00 pm to the morning. (That is to say, even if you fall asleep in the early hours of the morning from 18:00 pm onwards, you can be detected, but if you fall asleep in the morning before 9:00 am/daytime before 18:00 pm (night shift), it will not be monitored and recorded).

13. Why are there features that I don't see on the tracker side?

These functions are only supported to set, enable or disable in the APP port, there is no option for these functions in the tracker, but it doesn't affect you to use these functions. Includes sedentary reminder, smart alarm, shake to take a picture, find device / find phone, time system and more!

Use and Maintenance

1.The measurement results of this product are for industry testing purposes only and are not intended for any medical use or basis. Please follow the doctor's advice, do not use the measurement results for self-diagnosis and treatment.

2.This product is waterproof to IP68, suitable for swimming pools, showers (cold water) and shallow pools, not for deep diving and prolonged immersion in water. In addition, this product cannot be put into a hot water environment, as the steam will affect the watch.

3.Keep the product clean:

• Please use a clean flannel to clean the magnetic charging hole on the back of the watch.
• Do not use household cleaners when cleaning the product, please use soap-free cleaners.
• For stubborn stains, it is recommended to scrub with alcohol.

4.Safety Instructions:

• Please do not use mobile power to charge, and do not charge in a humid environment.
• Do not subject the product and its accessories to extreme temperatures, as this may result in danger of product malfunction, fire or explosion.
• Protect the product from strong impacts or bumps that may damage the product and its accessories, which may result in product malfunction, fire or explosion.
• Do not disassemble or modify the product and its accessories by yourself.
• When the product malfunctions, please contact us for after-sales service.