KINETIC DOORBELL MT5701
This document provides information and instructions for the Media-Tech KINETIC DOORBELL MT5701 wireless kinetic doorbell.
Product Features
| Feature | Receiver | Transmitter |
|---|---|---|
| Power Supply | AC 110-260V 50/60Hz | |
| Power consumption | Up to 140mA | |
| Working temperature | -20÷55°C | -20÷65°C |
| Waterproof | IP44 standard | |
| Volume | 4 levels (mute included) | |
| Ringtones | 45 polyphonic | |
| Pressure | 3-4N | |
| Transmitter life | > 200,000 times | |
| Working frequency | 433.92MHz ± 0.5MHz | |
| Operating range | Up to 100m in open area |
Installation and Setup
Receiver Installation
- Insert the receiver into an AC outlet socket.
- Press the "music choice" button to select a ringtone.
- Press the "volume" button to set the volume level.
Transmitter Mounting
The transmitter (doorbell button) can be mounted using the provided double-sided tape.
Pairing Procedure
- Place the doorbell button close to the receiver.
- When the receiver is plugged into an AC outlet, press and hold the "volume" button for 5 seconds.
- Simultaneously press the doorbell button five times.
- If pairing is successful, the receiver will emit a sound.
Troubleshooting
Problem: Receiver signal loss
Q: Receiver suddenly cannot get signal from the transmitter.
A: Re-plug the receiver into the outlet. If the issue persists, perform the pairing procedure as described above.
Problem: Short operating range
Q: Short operating range.
A: Before installing the doorbell button, check the working distance in the intended environment. Obstacles such as walls and metal doors can affect the operating range.
Diagram Descriptions
The document includes overview diagrams showing the receiver plugged into a wall socket and the separate transmitter button. Another diagram illustrates the process of attaching the doorbell button to a surface.
Environmental Protection
This product is subject to the European Directive 2002/96/EU concerning Waste Electrical and Electronic Equipment (WEEE). Consumers are legally obligated to return electrical and electronic devices at the end of their service life to designated public collection points or to the point of sale. This ensures that old devices are recycled and reused, contributing to environmental protection. For technical support, please visit www.media-tech.eu.
