Kenwood PKT-300 ProTalk XLS UHF Radio - HiTech Wireless Store - Business Two Way Radio
16 juil. 2024 — COMPACT, LIGHTWEIGHT DESIGN & OPERATING EASE. Compact enough to carry anywhere with ease, the PKT-300 has a distinctively ergonomic form that's easy to hold ...
Business Two-Way Radio PKT-300 UHF FM TRANSCEIVER Enhanced Features in a Compact Radio Introducing the PKT-300 portable radio, which comes with enhanced features that are perfect for those who need a lightweight, small, and powerful device. This radio is designed to be easy to use and can enhance work quality, efficiency, and worker well-being. It has a rugged, compact design, making it an ideal choice for fast-paced, customer service-focused retail, hospitality, warehousing, and entertainment venues. The integrated swivel belt clip makes it easy for employees to wear the radio and take advantage of one-touch, instant-on communications. With a robust 2 watts of transmit power, the PKT-300 provides loud and clear KENWOOD quality audio, even in high noise environments. The bright LCD display is easy to read in low light situations. The option to change frequencies or upgrade to 16 channels further extends the versatility of the PKT-300. General Features COMPACT, LIGHTWEIGHT DESIGN & OPERATING EASE Compact enough to carry anywhere with ease, the PKT-300 has a distinctively ergonomic form that's easy to hold and operate. It weighs 4.87oz (138 g) with the rechargeable Li-ion battery and control buttons, which are simple to use with PTT, MON, MENU, CALL, UP and DOWN operations. 2 WATTS OF TRANSMIT POWER Designed to be easy-to-use, the portable has a full 2 Watts of power for clear voice quality in noisy environments, yet it's extremely lightweight (4.87 oz). PROGRAMMABLE CHANNELS Users can modify each of the 6 or 16 preset channels to any of the 99 pre-stored frequencies. 4-DIGIT 7-SEGMENT LCD WITH BACKLIGHTING The large 4-digit 7-segment display makes it easy to check on both channel and signaling information. There is also a 3-level icon in the LCD to indicate how much battery power is left. POWERFUL BATTERY The 2200 mAh lithium-ion battery lasts through multiple shifts without recharging. Ready to use, right out of the box. VERSATILITY Customize your radio beyond the basic menu with programming software that allows full configuration of buttons and options. This enhances usability, compatibility, and reduces operator errors by restricting access. Other Features Actual Size · MIL-STD 810 C, D, E, F, G and H (refer to the chart on back page) · Built-in VOX · Built-in Privacy Talk · Key Lock/Super Lock · Compander · Battery Saver · 10-Call Alert Tone · Busy Channel Lockout · Wireless cloning and easy modifications Included Accessories The PKT-300 comes with a battery, charger, AC adapter and swiveling belt clip holster. The two-pin connector works with popular accessories for additional versatility. * All Accessories / Options: 1 Year Accessories All accessories may not be available in all markets. Contact an authorized KENWOOD dealer for details and complete list of all accessories. KNB-81L Li-ion Battery Pack (3.6V/2,200mAh) (Same as supplied) KMC-21A Lightweight Compact Speaker Microphone KSC-50K Single Unit Charger (Same as supplied) KMC-45D MIL-SPEC, IP54/55 Speaker Microphone KHS-22A Behind-the-Head Headset with Flexible Boom Mic and In-lin PTT Single Ear Receiver KHS-26 Clip Mic w/ Earphone KSC-44MLKS AC Adapter (For KSC-50CR multi-unit use, up to 6 units) KHS-8BL 2-wire Palm Microphone w/ Earphone KHS-27A D-Ring Ear Hanger w/PTT & Mic KSC-506K One Piece 6-Unit Charger KHS-9BL 3-wire Palm Microphone w/ Earphone KHS-31C C-Ring Ear Hanger w/PTT & Mic KEP-2 2.5mm earphone kit for KMC-45 Speaker Mic KBH-21 Belt Clip (Long 1.91 in / 50mm] KBH-23K Swivel Belt Clip Holster KPG-208DK Programming Software KPG-22U USB to 2-pin Programming Cable Specifications General Frequency Range Number of Channels Channel Spacing Antenna Impedance Battery Life (5-5-90 duty cycle) with KNB-81L (3.6V/2200mAh) Operating Temperature Range* Frequency Stability CH Frequency Spread Dimensions Radio with KNB-81L Weight Radio with KNB-81L FCC ID PKT-300 450-470 MHz Preset 99 Frequencies 6 25 / 12.5 kHz 50 Approx. 14 hours (Battery saver off) Approx. 18 hours (Battery saver on) -22°F ~ +140°F (-30°C ~ +60°C) ±2.5ppm 20 MHz (W x H x D) Projections Not Included 1.97 x 3.86 x 1.06 in (50 x 98 x 27 mm) 4.87 oz (138 g) K44523500 *Operating temperature specification for a Li-ion battery is 14°F to +140°F (-10°C to +60°C) Specifications shown are typical and subject to change without notice, due to advancements in technology Details and timing of firmware and software updates are subject to change without notice. Analog measurements made per TIA603. Specifications are measured according to applicable standards. Receiver Sensitivity (12 dB SINAD) Wide / Narrow Selectivity Wide / Narrow Intermodulation Distortion Wide / Narrow Spurious Responce Audio Output Power Transmitter RF Power Output High / Low Spurious Responce FM Hum & Noise Wide / Narrow Audio Distortion Modulation Wide / Narrow PKT-300 0.25 / 0.28 µV 60 / 50 dB 55 /50 dB 55 dB 100 mW /8 (External Speaker) PKT-300 2.0 / 0.5 W (ERP) 55 dB 40 / 34 dB Less than 5% 16K0F3E / 11K0F3E ProTalk® is a registered trademark of JVCKENWOOD Corporation. All other trademarks are the property of their respective holders. MIL-STD & IP MIL Standard MIL 810C Methods/Procedures Low Pressure High Temperature Low Temperature Temperature Shock Solar Radiation Humidity Vibration Shock 500.1/Procedure I 501.1/Procedure I, II 502.1/Procedure I 503.1/Procedure I 505.1/Procedure I 507.1/Procedure I, II 514.2/Procedure VIII, X 516.2/Procedure I, II, V International Protection Standard Dust & Water Protection IP52 MIL 810D Methods/Procedures 500.2/Procedure I, II 501.2/Procedure I, II 502.2/Procedure I, II 503.2/Procedure I 505.2/Procedure I 507.2/Procedure II, III 514.3/Procedure I 516.3/Procedure I, IV MIL 810E Methods/Procedures 500.3/Procedure I, II 501.3/Procedure I, II 502.3/Procedure I, II 503.3/Procedure I 505.3/Procedure I 507.3/Procedure II, III 514.4/Procedure I 516.4/Procedure I, IV MIL 810F Methods/Procedures 500.4/Procedure I, II 501.4/Procedure I, II 502.4/Procedure I, II 503.4/Procedure I, II 505.4/Procedure I 507.4 514.5/Procedure I 516.5/Procedure I, IV MIL 810G Methods/Procedures 500.5/Procedure I, II 501.5/Procedure I, II 502.5/Procedure I, II 503.5/Procedure I 505.5/Procedure I 507.5/Prcedure II 514.6/Procedure I 516.6/Procedure I, IV MIL 810H Methods/Procedures 500.6/Procedure I, II 501.7/Procedure I, II 502.7/Procedure I, II 503.7/Procedure I 505.7/Procedure I 507.6/Prcedure II 514.8/Procedure I 516.8/Procedure I, IV JVCKENWOOD USA Corporation Safety & Security Sector Headquarters 1440 Corporate Drive | Irving, TX 75038 Order Administration/Distribution 4001 Worsham Ave. | Long Beach, CA 90808 www.kenwood.com/usa JVCKENWOOD Canada Inc. Canadian Headquarters and Distribution 6685 Millcreek Drive, Unit 8, Mississauga, ON L5N 5M5 www.kenwood.com/ca ADS#06824 Printed in U.S.A.Adobe InDesign 19.4 (Macintosh) Adobe PDF Library 17.0