Lenovo X3 Pro Bone conduction - Bluetooth oortjes met bone conduction | bol
tinkplus-X3 pro
2022-01-04-tinkplus-X3 pro 73x93mm 80g
thinkplus Bone conduction Headphone X3 pro
1. x 1
thinkplus Bone conduction Headphone X3 Pro
3. x 1
2. x 1
01
4. x 1
V5.3 10m 135mAh 5V 100mA 2 7 0.5W,8,86+/-3dB ISM band (2.402-2.480GHZ)
1 2 3 4 5
1. 33
3S
3S
2. tinkplus-X3 pro
tinkplus-X3 pro
: :
USB
5V .
5V
USB
/ SIRI /
3S
1S
USB
SJ/T11364 O: GB/T26572 X: GB26572 "X",
SJ/T11364 *:,, ,
,
12 ( "" 30 ( 13
1 2 3 4 5 6 7 8 9 10
11., ,
:frank@szeysan.cn :400-812-0102
"
""
"
()
2022()
tinkplus-X3 pro
thinkplus Bone conduction Headphone X3 pro
X5
USER MANUAL
Please read this manual carefully before using the headphones.
LIST OF ITEMS
1. Earphone x 1
thinkplus Bone conduction Headphone X3 Pro
USER MANUAL Please read this manual carefully before
using the headphones.
3. Instruction manual x 1
2. Charging cable x 1
01
4. Certificate of quality x 1
Product specification
BT version
: V5.3
Transmission distance: 10M
Battery capacity Rated input
: 135mAh : 5V 100mA
Charging time
: about 2 hours
Playing time
: about 7 hours
Horn specification : 0.5W,8 ,86+/-3dB Working frequency band : ISM band (2.402-2.480GHZ)
PRODUCT INTRODUCTION
(1) Except for the operation methods specifically marked in the manual, please do not try to disassemble or replace any parts in the headphone.
(2) If any liquid accidentally enters the product, disconnect and separate the product immediately.
(3) To avoid electric shock, please make sure that there is no water on your hands when installing or uninstalling the headphone.
(4) Do not place the headphone near a heat source or directly expose them to a fire source.
(5) Do not place the headphone in an environment with strong electrom agnetic force, otherwise they will malfunction.
PRODUCT OPERATION INSTRUCTIONS 1.Switching on and off
Press and hold the function key for 3 seconds, the red and blue lights flash on; press and hold the function key for 3 seconds, the shutdown light goes off.
Long press 3S to power on
Long press 3S to turn off the phone
2.BT connection
After the headset is turned on, open your phone, find the settings in your phone and turn on BT (as shown in the picture).BT search shows Lenovo tinkplus-X3 pro, click to connect successfully, the indicator blue light flashes slowly, the blue light goes off after normal playback.
Setting
BT
BT
My Equipment Lenovo tinkplus-X3 pro
Pairing status light alert: blue light slow flashing pairing in Matching successful light prompt: blue light off has been connected
PRODUCT DIAGRAM
On/Off key Plus key Minus key Battery Indicator light Bone conduction oscillator Microphone USB charging port
INDICATOR LIGHT DESCRIPTION
Alternating red and blue Blue slow flash Blue light breathing Red light is always on Blue light is always on
Pairing Status Connection succeeded Enter low latency game mode
Being charged Battery full
CHARGING INDICATION
Normal connection, the phone will show the headset power, such as low battery alarm, that is, the need to charge, pleaseuse the labeled 5V charger connected to the charging cable can be charged.
5V Charging head
FUNCTION OPERATION
Micro USB
Turn on and off: Click on the keys 3S
Game Mode:
Triple strike keys
Next song: Previous song:
Double click Double click
keys keys
Increase the volume:Click on the keys
Reduce the volume: Click on the keys
Activate SIRI:
Long press keys 1S
Answer and hang up:Click on the keys
CAUTIONS
Please plug the USB silicone plug during use to avoid the entry of rain and sweat. If there is sweat and other adhering to the silicone plug, please wipe clean in time before opening the silicone plug for charging.
NAME AND CONTENT OF HAZARDOUS PRODUCTS SUBSTANCES IN
Name and content of hazardous substances in products
Part Name
Harmful materials Pb Hg Cd Cr(VI) PBB
PBDE
Printed circuit assembly
Small structural parts such as shell
This form is compiled in accordance with SJ/T 11364. Indicates that the content of the hazardous
substance in all homogeneous materials of the part is in Below the limit requirements specified in GB/T 26572.
Indicates that the content of the hazardous substance in at least one of the homogeneous materials of the part exceeds the limit requirements specified in
GB/T 26572.
The parts marked with "X" on the form cannot be replaced by hazardous substances due to restrictions on the global technological development level.
Printed circuit board components*: including printed circuit boards and their parts, electronic components, etc., Depending on the product model, the product you purchased may not contain all the above components
Electronic and electrical products sold in the People's Republic of China must mark this Logo, the number in the logo represents the product under normal use environmental protection use period.
WARRANTY STATEMENT
Disclaimer This user manual does not have any form of guarantee, position expression or other implication. The mentioned products, specifications and information are for reference only, and the content will also be updated on the webpage at any time, without additional line notification.
Warranty statement: The product attached to this document is guaranteed as follows: If the product is twelve (12) months from the date of purchase ("Warranty Period"), under normal conditions of use due to quality defects damaged, can be repaired free; if the manufacturer confirms that it cannot be repaired, free replacement; repaired or replaced product, Continue to enjoy the warranty during the remaining warranty period (the shortest not less than 30 days). Purchase date by sale The ticket date shall prevail; if the purchase date cannot be determined, the warranty period shall be 13 Months calculation. If you apply for a warranty, please call the product service hotline first and execute it in the manner instructed by us. When applying for warranty, you need to provide an accurate, complete and clearly filled out valid sales invoice.
The above guarantee does not apply to the following situations: 1. The validity period of the three packs is exceeded; 2. Alteration of the warranty card and product code does not match the product body; 3. Causes caused by misuse, abuse or improper transportation, use, maintenance or storageimpaired or damaged; 4. Failure or damage caused by force majeure (such as earthquake, war, fire, etc.) or accident bad; 5. The zipper and buckle are damaged due to excessive force;
WARRANTY STATEMENT
6. Disconnection or tearing caused by excessive load; 7. Any damage caused by sharp objects; 8. Products with signs of burning or flooding; 9. Damage caused by unauthorized disassembly; 10. Aging, discoloration, abrasion, rupture and other losses occurred during normal use of the product. 11. If the original identification label of the product is changed or damaged, this guarantee will become invalid. The completeness and appearance of the product and accompanying materials are not within the scope of the guarantee. You should Check on the spot and raise objections to any discrepancies.
The above guarantees are all guarantees we make regarding
the products, and are only applicable in mainland China.
Nothing in this document affects consumer rights that cannot
be excluded or restricted under the law profit.
After-sales service Emal: frank@szeysan.cn
Service supervision hotline: 400-812-0102
"
"a"
"and other Lenovo logos are Lenovo Group
The trademark of the affiliated company. (This material)
mentioned other trademarks, company names, products or
services
The name may be a trademark of a Lenovo Group company
or another company.
Copyright 2022 Lenovo (Beijing) Co., Ltd. All rights reserved.
Adobe PDF library 15.00 Adobe Illustrator(R) 24.0