(주)아이투프럼 ITOFROM | 지능형스마트팩토리솔루션 ShotLine
User Manual for ITOFROM models including: I2F-NHS24, I2F-NHS24 Smart Mold Sensor, Smart Mold Sensor, Mold Sensor, Sensor
ITOFROM I2F-NHS24 2BC8U-I2F-NHS24 2BC8UI2FNHS24 i2f nhs24
File Info : application/pdf, 6 Pages, 491.53KB
DocumentDocumentIOT & SMART FACTORY TECHNOLOGY
BIGDATA TECHNOLOGY
DATA ANALYSIS TECHNOLOGY
Smart Mold Sensor User Manual
Date. 2024. 04. 22
.
Smart Mold Sensor user Manual Name of Each Part of Smart Mold Sensor
Name of Each Part of Smart Mold Sensor
Smart Mold Sensor Name
1 Product QR Code 2 Product Serial Number
3 LCD Window
6 Magnetic Bracket
4 Battery Outage Indication LED 5 Power/Setting Button
Smart Mold Sensor LCD Name
1 2 34 5 6 7
1
No.
Description
No.
Description
No.
Description
1
Circular Communication
4
Communication Status
7 Accumulated shots and Settings
Alarm
2
Communication
Battery Remaining
5
Status
·
·
Mold attachment
3 Shot Counter Status 6 and detachment
·
·
information
Smart Mold Sensor user Manual Smart Mold Sensor Communication test Method
Smart Mold Sensor Communication test Method
Smart Mold Sensor Communication test Method
If you press and release the setup button for more than 3 seconds, the LCD window displays ConnEt, and after a short while, displays the following.
The wireless composite sensor LCD window displays r-xx (number, communication sensitivity) -xx (number, number of data) and is considered to be in normal communication with the data collection device.
Communication Test Successful
If it is not in the data collector radius or fails, it appears as nEt-Err and disappears after a while.
2
Communication Test failed
Smart Mold Sensor user Manual Smart Mold Sensor Specification
Smart Mold Sensor Specification
SOTATION Power Supply Frequency of use
EXPLANATION Replaceable internal battery, 3.6V Wireless 2.4GHz
3
Data Terminal(Collection) User Manual Data Terminal (Collection Device) Instruction
FCC Instruction
FCC Compliance Statement This device complies with part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.
FCC Interference Statement This equipment has been tested and found to comply with the limits for a Class A digital device, pursuant to part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference when the equipment is operated in a commercial environment. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instruction manual, may cause harmful interference to radio communications. Operation of this equipment in a residential area is likely to cause harmful interference in which case the user will be required to correct the interference at his own expense.
FCC Caution Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
FCC Radiation Exposure Statement This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. This equipment should be installed and operated with minimum distance 20 cm between the radiator and your body. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
5
IOT & SMART FACTORY TECHNOLOGY
BIGDATA TECHNOLOGY
DATA ANALYSIS TECHNOLOGY
Thank You!
5F DS Building 8, Dogok-ro 7-gil Gangnam-gu, Seoul, 06255, Korea T. +82-2-508-6570 F. +82-2-508-6571 W. www.itofrom.com M. sales@itofrom.com