FUBBLA LED Work Lamp
by IKEA
Important Safety Information
⚠️ Damaged Cable: If the external flexible cable or cord of this luminaire is damaged, it must be replaced exclusively by the manufacturer, their service agent, or a similarly qualified person to avoid a hazard. If you are uncertain, please contact IKEA.
? Energy Efficiency: This product contains a light source of energy efficiency class F.
Assembly Instructions
Follow these steps to assemble your FUBBLA LED work lamp.
Tools Required:
- Screwdriver ?
Parts Included:
The following parts are included with your lamp:
- Lamp Base Unit (1x)
- Assembly Screw (1x)
Assembly Steps:
Step 1: Prepare the Base
Feed the power cord through the opening in the lamp base unit. Ensure the cord is not twisted.
Step 2: Attach the Lamp Arm
Insert the lamp arm into the designated slot on the base unit. Align the screw hole.
Step 3: Secure the Arm
From the underside of the base, insert the assembly screw through the base and into the lamp arm. Use a screwdriver to tighten the screw securely.
Step 4: Attach the Lampshade
Carefully align the lampshade with the lamp head. Secure it in place by inserting and tightening the provided screws.
Bulb Replacement
⚠️ Important: When changing the bulb, use only a GUZ 5.3 LED bulb.
