Defender Series Pro XT Installation Instructions
1
Separate and remove lid from back half.
Diagram shows the phone case being separated into two parts: the back half and the front lid.
2
Place device into back half of case.
Diagram shows a smartphone being placed into the back half of the phone case.
3
Tuck each corner of lid frame into back and press along edges. If necessary, gently pull back rubber seal to slip lid frame all the way underneath.
Diagram shows the lid frame being pressed onto the back half, with arrows indicating to tuck each corner along the edges. A detail shows gently pulling back a rubber seal to help the lid frame slide underneath.
