Home | DrayTek
Index of /Vigor2915/Document/CE
User Guide for DrayTek models including: Vigor2915 Series Dual WAN Security Router, Vigor2915 Series, Dual WAN Security Router, WAN Security Router, Security Router, Router
1 1. Package Content Take a look at the package content. If there is anything missed or damaged, please contact DrayTek or dealer immediately. Vigor router Quick Start Guide
File Info : application/pdf, 17 Pages, 646.49KB
DocumentDocumentVigor2915 Series Dual-WAN Security Router Quick Start Guide (For RF Model) Version:1. 3 Firmware Version: V4. 4. 2. 1 (For future update, please visit DrayTek web site) Date: December 25, 2023 i Intellectual Property Rights (IPR) Information Copyrights Trademarks © All right s reserved. This publicat ion cont ains inf ormat ion t hat is prot ect ed by copyright . No part may be reproduced, t ransmit t ed, t ranscribed, st ored in a ret rieval syst em, or t ranslat ed int o any language wit hout writ t en permission f rom t he copyright holders. The f ollowing t rademarks are used in t his document : Microsof t is a regist ered t rademark of Microsof t Corp. Windows 8, 10, 11 and Explorer are t rademarks of Microsof t Corp. Apple and Mac OS are regist ered t rademarks of Apple Inc. Ot her product s may be t rademarks or regist ered t rademarks of t heir respect ive manuf act urers. Safety Instructions and Approval Safety Instructions Warranty Read t he inst allat ion guide t horoughly bef ore you set up t he rout er. The rout er is a complicat ed elect ronic unit t hat may be repaired only be aut horized and qualif ied personnel. Do not t ry t o open or repair t he rout er yourself . Do not place t he rout er in a damp or humid place, e. g. a bat hroom. Do not st ack t he rout ers. The rout er should be used in a shelt ered area, wit hin a t emperat ure range of 0 t o +40 Celsius. Do not expose t he rout er t o direct sunlight or ot her heat sources. The housing and elect ronic component s may be damaged by direct sunlight or heat sources. Do not deploy t he cable f or LAN connect ion out door t o prevent elect ronic shock hazards. Do not power of f t he rout er when saving conf igurat ions or f irmware upgrades. It may damage t he dat a in a f lash. Please disconnect t he Int ernet connect ion on t he rout er before powering it of f when a TR-069/ ACS server manages t he rout er. Keep t he package out of reach of children. When you want t o dispose of t he rout er, please f ollow local regulat ions on conservat ion of t he environment . We warrant t o t he original end user (purchaser) t hat t he rout er will be f ree f rom any def ect s in workmanship or mat erials f or a period of t wo (2) years f rom t he dat e of purchase f rom t he dealer. Please keep your purchase receipt in a saf e place as it serves as proof of dat e of purchase. During t he warrant y period, and upon proof of purchase, should t he product have indicat ions of f ailure due t o f ault y workmanship and/ or mat erials, we will, at our discret ion, repair or replace t he def ect ive product s or component s, wit hout charge f or eit her part s or labor, t o what ever ext ent we deem necessary t ore-st ore t he product t o proper operat ing condit ion. Any replacement will consist of a new or re-manuf act ured f unct ionally equivalent product of equal value, and will be of f ered solely at our discret ion. This warrant y will not apply if t he product is modif ied, misused, t ampered wit h, damaged by an act of God, or subj ect ed t o abnormal working condit ions. The warrant y does not cover t he bundled or licensed sof t ware of ot her vendors. Def ect s which do not signif icant ly af f ect t he usabilit y of t he product will not be covered by t he warrant y. We reserve t he right t o revise t he manual and online document at ion and t o make changes f rom t ime t o t ime in t he cont ent s hereof wit hout obligat ion t o not if y any person of such revision or changes. iii Declaration of Conformity Hereby, DrayTek Corporat ion declares t hat t he equipment t ype Vigor2915 is in compliance wit h Radio Equipment Direct ive 2014/ 53/ EU, Low Volt age Direct ive 2014/ 35/ EU and RoHS 2011/ 65/ EU. . The f ull t ext of t he EU declarat ion of conf ormit y is available at t he f ollowing int ernet address: ht t ps: / / f w. drayt ek. com. t w/ Vigor2915/ Document / CE/ Manuf act urer: DrayTek Corp. Addr ess: No. 26, Fushing Rd. , Hukou, Hsinchu Indust rial Park, Hsinchu 303, Taiwan Product : Vigor2915 Series Frequency Inf ormat ion f or Europe area: 2. 4GHz WLAN 5GHz WLAN 2400MHz - 2483MHz, max. TX power: 19. 98dBm *1 5150MHz - 5350MHz, max. TX power: 22 dBm *2 Requirement s in AT/ BE/ BG/ CZ/ DK/ EE/ FR/ DE/ IS/ IE/ IT/ EL/ ES/ CY/ LV/ LI/ LT/ LU/ HU/ MT/ NL/ NO/ PL/ PT/ RO/ SI/ SK/ TR/ FI/ SE/ CH/ HR/ UK(NI). 5150MHz~5350MHz is f or indoor use only. (*1: f or 2. 4GHz WLAN model; *2: f or 5GHz WLAN model) This product is designed f or 2. 4GHz / 5GHz WLAN net work t hroughout t he EC region. Regulatory Information Federal Communicat ion Commission Int erf erence St at ement This equipment has been t est ed and f ound t o comply wit h t he limit s f or a Class B digit al device, pursuant t o Part 15 of t he FCC Rules. These limit s are designed t o provide reasonable prot ect ion against harmf ul int erf erence in a resident ial inst allat ion. This equipment generat es, uses and can radiat e radio f requency energy and, if not inst alled and used in accordance wit h t he inst ruct ions, may cause harmf ul int erf erence t o radio communicat ions. However, t here is no guarant ee t hat int erf erence will not occur in a part icular inst allat ion. If t his equipment does cause harmf ul int erf erence t o radio or t elevision recept ion, which can be det ermined by t urning t he equipment of f and on, t he user is encouraged t o t ry t o correct t he int erf erence by one of t he f ollowing measures: Reorient or relocat e t he receiving ant enna. Increase t he separat ion bet ween t he equipment and receiver. Connect t he equipment int o an out let on a circuit dif f erent f rom t hat t o which t he receiver is connect ed. Consult t he dealer or an experienced radio/ TV t echnician f or help. This device complies wit h Part 15 of t he FCC Rules. Operat ion is subj ect t o t he f ollowing t wo condit ions: (1) This device may not cause harmf ul int erf erence, and (2) This device may accept any int erf erence received, including int erf erence t hat may cause undesired operat ion. iv USA Local Represent at ive Company name Ad d r ess ZIP Code Cont act Person ABP Int ernat ional Inc. 13988 Diplomat Drive Suit e 180 Dallas TX 75234 75234 E-mail it admin@abpt ech. com Mr. Henry N Cast illo Tel . (972)831-1600 140 Caut ion: Any changes or modif icat ions not expressly approved by t he part y responsible f or compliance could void t he user's aut horit y t o operat e t his equipment . The ant enna/ t ransmit t er should be kept at least 20 cm away f rom human body. Operat ions in t he 5. 15-5. 25GHz band are rest rict ed t o indoor usage only. External Power Supply ErP Information *The ext ernal power supply used f or each product will be model dependent . 1 2 3 4 5 6 7 8 A Manuf act urer CWT CWT CWT CWT CWT APD APD APD B Addr ess No. 222, Sec. 2, Nankan Rd. , Luj hu Tow nshi p , Taoyuan Count y 338, Tai w an No. 222, Sec. 2, Nankan Rd. , Luj hu Tow nshi p , Taoyuan Count y 338, Tai w an No. 222, Sec. 2, Nankan Rd. , Luj hu Tow nshi p , Taoyuan Count y 338, Tai w an No. 222, Sec. 2, Nankan Rd. , Luj hu Tow nshi p , Taoyuan Count y 338, Tai w an No. 222, Sec. 2, Nankan Rd. , Luj hu Tow nshi p , Taoyuan Count y 338, Tai w an No. 5, Lane 83, Lung-Sou St . , Taoyuan Cit y 330, Tai w an No. 5, Lane 83, Lung-Sou St . , Taoyuan Cit y 330, Tai w an No. 5, Lane 83, Lung-Sou St . , Taoyuan Cit y 330, Tai w an C 2ABB012F 2ABB018F 2ABL024F 2ABL030F 2ABN036F WA-12M1 WB-18D12 WA-24Q12 UK UK UK UK UK 2FG FG FG Model ident ifier 2ABB012F 2ABB018F 2ABL024F 2ABL030F 2ABN036F WA-12M1 WB-18D12 WA-24Q12 EU EU EU EU EU 2FK FK FK D Input volt age 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V 100~240V E Input AC f r equenc 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz 50/ 60Hz y Out put volt age 12. 0V 12. 0V 12. 0V 12. 0V 12. 0V 12. 0V 12. 0V 12. 0V DC F Out put current 1. 0A 1. 5A 2. 0A 2. 5A 3. 0A 1. 0A 1. 5A 2. 0A G Out put power 12. 0W 18. 0W 24. 0W 30. 0W 36. 0W 12. 0W 18. 0W 24. 0W H Aver age act ive 84. 9% 86. 2% 87. 6% 87. 8% 89. 8% 83. 7% 85. 4% 88. 6% ef f i ci ency I Ef f iciency at low 73. 6% 78. 0% 81. 3% 83. 3% 83. 7% 74. 5% 80. 5% 86. 4% load 10% J No- l oad power consumpt 0. 07W 0. 07W 0. 07W 0. 07W 0. 07W 0. 07W 0. 10W 0. 07W ion 9 APD No. 5, Lane 83, Lung-Sou St . , Taoyuan Cit y 330, Tai w an WA-36A12 FG WA-36A12 FK 100~240V 50/ 60Hz 12. 0V 3. 0A 36. 0W 88. 2% 85. 4% 0. 10W 10 MOSO Sangt ai Indust rial Par k, Guanw ai Xi aobai m ang Songbai Road, Nanshan Dist rict , 518108 Shenzhen , Guangdon g, Chi na MSV2000R12 0024Q0-GB MSV2000R12 0024Q0-DE 100~240V 50/ 60Hz 12. 0V 2. 0A 24. 0W 87. 8% 85. 4% 0. 10W 11 MOSO Sangt ai Indust rial Par k, Guanw ai Xi aobai m ang Songbai Road, Nanshan Dist rict , 518108 Shenzhen , Guangdon g, Chi na MSSV2500WR 120030E0-GB MSSV2500WR 120030E0-DE 100~240V 50/ 60Hz 12. 0V 2. 5A 30. 0W 89. 5% 84. 7% 0. 08W 12 MOSO Sangt ai Indust rial Par k, Guanw ai Xi aobai m ang Songbai Road, Nanshan Dist rict , 518108 Shenzhen , Guangdon g, Chi na V30-V300 0R12 0-036T0- GB V30-V300 0R12 0-036T0-D E 100~240V 50/ 60Hz 12. 0V 3. 0A 36. 0W 89. 3% 87. 7% 0. 10W *The ext ernal power supply used f or each product will be model dependent . For more updat e, please visit www. drayt ek. com. v Table of Contents 1. Package Content .................................................................................................. 1 2. Panel Explanation................................................................................................. 2 2.1 Vigor2915ac ............................................................................................................................... 2 3. Hardware Installation ........................................................................................... 4 3.1 Network Connection ................................................................................................................... 4 3.2 Wall-Mounted Installation ........................................................................................................... 5 4. Software Configuration ........................................................................................ 6 5. Customer Service ............................................................................................... 12 vi 1. Package Content Take a look at t he package cont ent . If t here is anyt hing missed or damaged, please cont act DrayTek or dealer immediat ely. Vigor rout er Quick St art Guide RJ-45 Cat -5 Et hernet Cable Ant enna x 2 The t ype of t he power adapt er depends on t he count ry t hat t he rout er will be inst alled. * The maximum power consumpt ion is 12 Wat t s. UK-t ype Power Adapt er EU-t ype Power Adapt er USA/ Taiwan-t ype Power Adapt er AU/ NZ-t ype Power Adapt er 1 2. Panel Explanation 2.1 Vigor2915ac LED ACT Int ernet W2/ P4 P3~P1 W1 USB WISPr 2. 4G/ 5G Status Bl i nki ng Of f On Of f Bl i nki ng On Of f Bl i nki ng On Of f Bl i nki ng On Of f Bl i nki ng On Bl i nki ng On Of f Bl i nki ng On Bl i nki ng Explanation The rout er is powered on and running normally. The rout er is powered of f . Int ernet connect ion is ready. Int ernet connect ion is not ready. The dat a is t ransmit t ing. The WAN/ LAN port is connect ed. The WAN/ LAN port is disconnect ed. The dat a is t ransmit t ing. The LAN port is connect ed. The LAN port is disconnect ed. The dat a is t ransmit t ing. The WAN port is connect ed. The WAN port is disconnect ed. The dat a is t ransmit t ing. USB device is connect ed and ready f or use. The dat a is t ransmit t ing. Wi-Fi WAN connect ed. Wi-Fi WAN disconnect ed. The dat a is t ransmit t ing. Wireless access point wit h bandwidt h of 2. 4GHz/ 5GHz is r eady. It will blink slowl y while wireless t raf f ic goes t hrough. ACT and WLAN LEDs blink quickl y and simult aneously when WPS is working, and will ret urn t o normal condit ion af t er t wo minut es. (You need t o set up WPS wit hin 2 minut es. ) 2 Interface PWR ON/ OFF USB W1 P1~P3 W2/ P4 Wireless LAN ON/ OFF/ WPS Fact ory Reset Description Connect or f or a power cord. Power Swit ch. Connect or f or a USB device (f or 3G/ 4G USB Modem or print er or Environment al Thermomet er). Connect er f or local net work devices or modem f or accessing Int ernet . Connect ers f or local net work devices. The f unct ion of t his connect or is adj ust able and cont rolled by web user int erf ace. It can perf orm t he j ob as a WAN port (f or accessing Int ernet ) or as a LAN port (f or local net work devices). Press "Wirel ess LAN ON/ OFF/ WPS" but t on once t o wait f or cl ient device making net work connect ion t hrough WPS. Press "Wireless LAN ON/ OFF/ WPS" but t on t wice t o enable (WLAN LED on) or disable (WLAN LED of f ) wireless connect ion. Rest ore t he def ault set t ings. Usage: Turn on t he rout er (ACT LED is blinking). Press t he hole and keep f or more t han 5 seconds. When you see t he ACT LED begins t o blink rapidl y t han usual , release t he but t on. Then t he rout er will rest art wit h t he f act ory def ault conf igurat ion. 3 3. Hardw are Installation This sect ion will guide you t o inst all t he rout er t hrough hardware connect ion and conf igure t he rout er' s set t ings t hrough web browser. Bef ore st art ing t o conf igure t he rout er, you have t o connect your devices correct ly. 3.1 Netw ork Connection 1. Connect t he cable Modem/ DSL Modem/ Media Convert er t o any WAN port of rout er wit h Et hernet cable (RJ-45). 2. Connect one end of an Et hernet cable (RJ-45) t o one of t he LAN port s (P1~P3) of t he rout er and t he ot her end of t he cabl e (RJ-45) int o t he Et hernet port on your comput er. 3. Connect one end of t he power cord t o t he rout er' s power port on t he rear panel, and t he ot her side int o a wall out let . 4. Power on t he device by pressing down t he power swit ch on t he rear panel. 5. The syst em st art s t o init iat e. Af t er complet ing t he syst em t est , t he ACT LED will light up and st art blinking. (For t he det ailed inf ormat ion of LED st at us, please ref er t o sect ion 2. Panel Explanat ion) 4 3 .2 Wa ll-M ount e d I nst a lla t ion Vigor rout er has keyhole t ype mount ing slot s on t he underside. 1. A t emplat e is provided on t he Vigor rout er packaging box t o enable you t o space t he screws correct ly on t he wall. 2. Place t he t emplat e on t he wall and drill t he holes according t o t he recommended inst ruct ion. 3. Fit screws int o t he wall using t he appropriat e t ype of wall plug. Not e The recommended drill diamet er shall be 6. 5mm (1/ 4" ). 4. When you f inished about procedure, t he rout er has been mount ed on t he wall f irmly. 5 4. Softw are Configuration To access Int ernet , pl ease f inish basic conf igurat ion af t er complet ing t he hardware inst allat ion. The Quick Start Wizard is designed f or you t o easily set up your rout er f or Int ernet access. You can direct ly access t he Quick Start Wizard via Web Conf igurat or. 1. Make sure your PC connect s t o t he rout er correct ly. Not e You may eit her simpl y set up your comput er t o get IP dynamically f rom t he rout er or set up t he IP address of t he comput er t o be t he same subnet as the default IP address of Vigor router 192. 168. 1. 1. For t he det ailed inf ormat ion, please ref er t o t he lat er sect ion - Trouble Shoot ing of t he guide. 2. Open a web browser on your PC and t ype http:/ / 192. 168. 1. 1. A pop-up window will open t o ask f or username and password. Please t ype " admin/ admin" as t he Username/ Password and click Login. Not e If you f ail t o access t o t he web conf igurat ion, pl ease go t o " Trouble Shoot ing" f or det ect ing and solving your problem. 6 3. Now, t he Main Screen will pop up. Click Wizards>>Quick Start Wizard. Not e The home page will change slight ly in accordance wit h t he rout er you have. 4. Ent er t he l ogin password on t he f ield of New Password and ret ype it on t he f ield of Confirm Password. Then click Next t o cont inue. 7 5. On t he next page as shown below, please select t he WAN int erf ace t hat you use. Then click Next f or next st ep. WAN1 (Et hernet ) and WAN2 (Et hernet ) will bring up dif f erent conf igurat ion page. Here we t ake WAN1 (Et hernet ) as an example. Af t er choosing WAN1, please specif y physical t ype. Then, click Next. On t he next page as shown below, please sel ect t he appropriat e Int ernet access t ype according t o t he inf ormat ion f rom your ISP. For example, you should select PPPoE mode if t he ISP provides you PPPoE int erf ace. PPPoE 1. Choose WAN1 as t he WAN Int erf ace and click t he Next but t on. The f ollowing page will be open f or you t o specif y Int ernet Access Type. 8 2. Click PPPoE as t he Int ernet Access Type. Then click Next t o cont inue. 3. Please manually ent er t he Username/ Password provided by your ISP. Click Next f or viewing summary of such connect ion. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, t he syst em st at us of t his prot ocol will be shown. 5. Now, you can enj oy surf ing on t he Int ernet . 9 DHCP 1. Choose WAN1 as WAN Int erf ace and click t he Next but t on. The f ollowing page will be open f or you t o specif y Int ernet Access Type. 2. Click DHCP as t he Int ernet Access t ype. Simply click Next t o cont inue. 10 3. Af t er f inished t he set t ings above, click Next f or viewing summary of such connect ion. 4. Click Finish. A page of Quick Start Wizard Setup OK!!! will appear. Then, t he syst em st at us of t his prot ocol will be shown. 5. Now, you can enj oy surf ing on t he Int ernet . 11 5. Customer Service If t he rout er cannot work correct ly af t er t rying many ef f ort s, pl ease cont act your dealer/ DrayTek f or f urt her help right away. For any quest ions, pl ease f eel f ree t o send e-mail t o support @drayt ek. com. Be a Registered Owner Web regist rat ion is pref erred. You can regist er your Vigor rout er via ht t ps: / / myvigor. drayt ek. com. Firmware & Tools Updates Due t o t he cont inuous evolut ion of DrayTek t echnology, all rout ers will be regularly upgraded. Please consult t he DrayTek web sit e f or more inf ormat ion on newest f irmware, t ools and document s. ht t ps: / / www. drayt ek. com 12