Remote Control User Manual
YK216-9C
Product Description
The YK216-9C is a remote control for transmitting RF signals with a frequency of 433.92MHz and OOK modulation. It features a display window with an 8-segment digital tube, capable of showing channels 0 through 8. Different channels can be switched by pressing buttons, allowing for different actions when the receiver receives different code values.
The remote control has a physical dimension of 110mm/4.331in in height and 37mm/1.456in in width. It includes a 'SET' button for channel setting and digital tube display, and two directional buttons for channel adjustment. The directional buttons are also used as code keys.
Function Description
1. Channel setting
- Press the 'SET' button; the digital tube will flash for setup mode.
- In setup mode, press the '>' button to increase the channel value. When the channel value reaches 8, pressing it again will reset it to 0.
- In setup mode, press the '<' button to decrease the channel value. When the channel value reaches 0, pressing it again will reset it to 8.
- Press the 'SET' button again to exit setup mode; the digital tube will stop flashing.
2. Transmit code
In non-setup mode, press any key among the directional buttons ('<', '>'). The remote will start transmitting the signal, indicated by the red indicator in the lower right corner flashing rapidly. Releasing the key will stop transmitting, and the digital tube will turn off.
Product parameter
| Parameter | Value |
|---|---|
| Working voltage | DC12V |
| Working temperature | -20°C - +60°C |
| Encoding mode | Imitation learning code |
| Working frequency | 433.92MHz |
| Working current | ≤16mA |
| Number of channels | 9 |
YK2169 Remote Control User Manual
Product Description
This remote control is designed to control RF433 devices with 1527 encoding. Before use, it needs to be paired with the buttons on your curtain switch. The three buttons on the remote control correspond to the functions of the required device (open, pause, close). This system highly recommends using this special remote for controlling MoesGo curtain switches or switch modules. It is advised not to use this remote for other irrelevant devices.
The remote control has a physical dimension of 109mm/4.291in in height and 36mm/1.417in in width. It features a digital channel display window and three buttons: one for channel up/code test, one for code transmission (codeschlüssel), and one for channel down/code test.
Product parameter
| Parameter | Value |
|---|---|
| Working voltage | 12V |
| Working frequency | 433MHz |
| Encoding mode | Imitation learning code |
| Working current | ≤18mA |
More information
For your complete satisfaction, feel free to share your great shopping experience. If you have any other needs, please do not hesitate to contact MoesGo first to meet your demand. Support: service@moeshouse.com
