Instruction Manual for BOYA models including: 2025022709531214, 1F0300300581, BOYALINK Multi Compatible 2.4GHz Dual Channel Wireless Microphone System, BOYALINK, Multi Compatible 2.4GHz Dual Channel Wireless Microphone System, 2.4GHz Dual Channel Wireless Microphone System, Dual Channel Wireless Microphone System, Wireless Microphone System, Microphone System, System
BOYA
3. Press and hold the power buttons to turn the transmitter and receiver on. 4. The transmitter and receiver will be automatically paired as soon as it is
Feb 27, 2025 · The BOYALINK is an ultra-compact and portable 2.4GHz wireless microphone system, compatible with cameras, smartphones, tablets, computers ...
File Info : application/pdf, 20 Pages, 1.49MB
DocumentDocumentMulti-Compatible 2.4GHz Dual-Channel Wireless Microphone System BOYALINK Instruction Manual Statement Please read this manual carefully before using and strictly operate and store it in accordance with the instructions. Please save the manual for your future reference. If you need further assistance than the user manual, please consult your retailer for help or email us: sales@boya-mic.com General Introduction The BOYALINK is an ultra-compact and portable 2.4GHz wireless microphone system, compatible with cameras, smartphones, tablets, computers and more. It features automatic pairing and selectable noise cancellation, delivering broadcast-quality sound with remarkable ease of use. The BOYALINK is ideal for content creation, live streaming, vlogging, mobile journalism and much more. There are 3 different adapters included in the kit: 3.5mm TRS, USB-C, and iOS Lightning. The receiver has a USB-C charging port that supports charging and powering the device while using it with a USB-C/ iOS Lightning adapter. The included charging case allows you to charge the transmitter and receiver anywhere, making the BOYALINK kit easy to carry on. Cautions 1. Non-professional teardown is strictly prohibited. 2. Please keep it away from heat sources such as radiators or spotlights. 3. Do not remove the battery without professionals' help. 4. Please clean the device with only a soft, dry cloth. 5. When using and storing, please keep away from the dust and moisture. 6. For the best pick-up pattern, do not hold your hand against the microphone capsule cover. Features · Also available in 48kHz HD audio when noise cancellation enabled · Wide-range 20-20,000Hz frequency response - deliver exceptional high-quality sound · In-built rechargeable lithium-ion battery · 3.5mm TRS analog output, USB-C and iOS Lightning digital output universal compatibility with cameras, smartphones and computers · Rotating clasp-type fur windshield, not easy to fall off · The receiver's clasp allows the adapter to be easily removed. · Sound can be played directly through your phone's speaker without unplugging the receiver. 01 Product Structure Transmitter 1 5 2 3 4 In-built Microphone Capsule Status Indicator Status Unpaired Paired successfully Mute Noise cancellation enabled Maximum/ Minimum gain Low battery Charging Fully charged Indicator Blinking blue slowly Static blue Blinking red slowly Static green Blinking blue(green) 3 times quickly Blinking red quickly Static red Red light off 6 7 Power Button · Press and hold to power on or off. · Press to mute or unmute the microphone. +/- Button · Press the "+" or "-" button to adjust mic gain in 6 levels. · Press both the "+" and "-" buttons at the same time to enable/disable noise cancellation. · The setting is retained even after the power is turned off. Belt Clip Charging Contacts USB-C Charging Port For charging the transmitter. (It's okay to use the transmitter while charging.) 02 Receiver 1 2 4 5 3 6 7 Status Indicator Status Unpaired Paired successfully Low battery Charging Fully charged Indicator Blinking blue slowly Static blue Blinking red quickly Static red Red light off Power Button Press and hold to power on or off. Press twice to enable or disable the phone's speaker. HINT: Once your phone's speaker is enabled, sound can be played directly without unplugging the receiver. Mono/ Stereo Toggle The output mode can be set to either mono or stereo. When in mono mode, the audio from the capsule, or capsules will be mixed to both the left and right sides. When in stereo 4 8 4 9 4 10 mode, the two capsules' audio output will be separated to the left and right sides. Contacts Clasp Charging Contacts USB-C Charging Port For charging the receiver. An external device can be powered and charged through this port while the receiver with a USB-C or iOS Lightning adapter is plugged into it. MFi Certified Lightning Adapter It can be connected to an iOS Lightning device. USB-C Adapter It can be connected to Android Smartphones, Tablets, Computers and other USB-C devices. 3.5mm TRS Adapter It can be connected to cameras, recorders, mixers or other devices with a 3.5mm TRS jack. 03 Charging Case 1 2 3 45 6 7 8 Slot for Transmitter(s) Slot for Adapters Slot for Fur Windshield Slot for Receiver Charging Contacts USB-C Charging Port OPEN Button Charging Indicator Status Low battery Charging Fully charged Battery Level Indicator 10% 25% 25%-50% 50%-75% 75%-100% 100% 04 Operation Guide 1. Attach the fur windshield to the transmitter(s) when using it outdoors or in a windy environment. 2. Push the selected adapter into the receiver. Connect the receiver to your audio devices, such as a camera, smartphone, tablet, computer, etc. 05 3. Press and hold the power buttons to turn the transmitter(s) and receiver on. 6. It is recommended to record a sample and play it back to check if the audio level is acceptable before recording. 7. In order to improve the recording effect in a noisy environment, it is recommended that press the "+" and "-" buttons on the transmitter(s) at the same time to enable noise cancellation. 4. The transmitter(s) and receiver will be automatically paired as soon as it is switched on. The indicators of both are static blue. 5. Toggle to select either mono or stereo output mode. 8. Press the power button twice to enable your phone's speaker to play the sound directly without unplugging the receiver. 9. After recording, put the transmitter(s) and receiver back into the case for charging. 06 Troubleshooting If you encounter problems when using the unit, please refer to the following checklist before contacting technical support. If the problem cannot be solved, please contact the dealer's after-sales service department. If there is no sound from the unit or no sound when connected to an external device Make sure the adapter on the receiver is well connected to your device. Or remove the adapter and wipe the charging contacts with a clean cloth. Make sure the mic gain is not turned to minimum. Make sure the unit is not muted. If the sound of the unit is too low or too loud or even distorted Adjust mic gain to the suitable level for recording in the current environment to improve the recording effect. Current noise or other abnormal noise appears during monitoring Make sure there is no interference near the unit. If the noise still exists after changing the unit's position, please contact our customer service. The operating range of the unit is limited and the sound is frequently intermittent Make sure there is no interference between the transmitter and receiver. If the intermittent sound still occurs frequently, please contact our customer service. Howling noise occurs when using the receiver with an adapter Make sure your phone's speaker is disabled in the receiver's menu. Failed to charge the transmitter(s) or receiver via the charging case Make sure the charging contacts of both are in full contact. Wipe the charging contacts with a clean cloth and try again. If you want to check whether the magnetic force is aging or whether the charging contacts of the two are not in sufficient contact, press the transmitter/receiver placed in the charging box to check whether it is in a charging state. If the transmitter(s) or the receiver is still failed to be charged, please contact our customer service. 07 Specifications Transmitter & Receiver Transmission Type Modulation Polar Pattern Antenna Operating Range (Without Obstacle) RF Output Power Distortion Frequency Response Sampling Rate Bit Rate Signal-to-Noise Ratio Sensitivity Audio Input Audio Output Battery Voltage/ Capacity Power Requirements In-built Battery Life Weight Dimensions Operating Temperature Storage Temperature 2.4GHz digital frequency Digital modulation Omnidirectional Ceramic antenna Up to 100m (This value is tested in the open areas without any interferences according to FCC standard.) < 10mW < 0.01% 20Hz-20kHz 48kHz 16bit >85dB -42dB TX: In-built microphone capsule RX: 3.5mm TRS analog output, USB-C and iOS Lightning digital output TX: 3.7V/95mAh RX: 3.7V/120mAh In-built lithium-ion battery/Charging contacts/ USB-C charging port TX: Approx. 10 hours RX: Approx. 6 hours TX: 12g; RX: 15g (with an adapter) TX: 59x16.2x13 mm RX: 59x18.2x133 mm 0°C to +50°C -10°C to +50°C 08 Charging Case Battery Capacity Charging Time Charging Connector Times for Charging Microphone Weight Dimensions Operating Temperature Storage Temperature 1000mAh Approx. 1.5 hours USB-C 2 times (2*TX+1*RX) 99g 112x73x33 mm 0°C to +50°C -10°C to +50°C In the Box BOYALINK 2× BOYALINK Transmitter 1 × BOYALINK Receiver 1 × USB-A to USB-C Cable 1 × MFi Certified Lightning Adapter 1 × 3.5mm TRS Adapter 1 × USB-C Adapter 2× Fur Windshield 1 × Charging Case 1 × Carrying Pouch BOYALINK A1 1 × BOYALINK Transmitter 1 × BOYALINK Receiver 1 × USB-A to USB-C Cable 1 × MFi Certified Lightning Adapter 1 × 3.5mm TRS Adapter 1 × USB-C Adapter 1 × Fur Windshield 1 × Carrying Pouch BOYALINK A2 2× BOYALINK Transmitter 1 × BOYALINK Receiver 1 × USB-A to USB-C Cable 1 × MFi Certified Lightning Adapter 1 × 3.5mm TRS Adapter 1 × USB-C Adapter 2× Fur Windshield 1 × Carrying Pouch 09 10 1 5 2 3 4 6 7 11 1 2 4 5 3 6 7 4 8 4 9 4 10 12 1 2 3 45 6 7 8 13 14 15 16 17 18 www.boya-mic.com V07 SHENZHEN JIAYZ PHOTO INDUSTRIAL., LTD. The BOYA logo is a trademark which is registered and owned by Shenzhen Jiayz Photo Industrial., Ltd. TEL: 400 6131096 Email: sales@boya-mic.com www.boya-mic.com / www.jiayz.com