LV Drive Series M100 /G100 /S100 / H100 /iS7/SP100 Scan the QR code marked on the product cover for further details on this product.
Jan 31, 2024 — Space efficiency is increased with a compact product design, side-by-side installation and standard installation of Din Rail.
LV Drive Series
M100 / G100 / S100 / H100+/ iS7 / SP100
Scan the QR code marked on the product cover for further details on this product.
Contents
04 LS Drive Comparison Table 06 Micro Drive M100 10 General Drive G100 16 Standard Drive S100 24 Fan & Pump Drive H100+ 30 High Performance Drive iS7 38 Bypass Package Solution SP100
Solution
02
LS Drive Solution
LS Drive at a Glance
LS Drive is characterized by its user-convenience interface, accurate and flexible control, and various functions. LS Drive Series with varied capacities and excellent functionality will be the optimal option for your company's competitiveness.
M100
Micro Drive
1Ø 115V : 0.25HP~1HP 1Ø 230V : 0.125HP~3HP
1/8HP 1/2HP 3HP 5HP 10HP 30HP 75HP 100HP 300HP 500HP 600HP 800HP
1Ø 115V 1Ø 230V
G100
General Drive
3Ø 230V: 0.5HP~10HP 3Ø 460V: 0.5HP~10HP
S100
Standard Drive
1Ø 230V 0.5HP~3.0HP 3Ø 230V 0.5HP~20HP 3Ø 460V 0.5HP~100HP IP66 NEMA4X 3Ø 230V 0.5HP~20HP IP66 NEMA4X 3Ø 460V 0.5HP~30HP
H100+
Fan & Pump Drive
3Ø 230V:1.0HP~125HP(ND) 3Ø 460V:1.0HP~800HP(ND) 3Ø 575V:7.5HP~125HP(ND)
iS7
High Performance Drive
3Ø 230V:1.0HP~100HP 3Ø 460V:1.0HP~600HP IP54 NEMA12 3Ø 230V 1.0HP~30HP IP54 NEMA12 3Ø 460V 1.0HP~30HP
NEW
NEW
SP100
Bypass Package Solution
3Ø 230V:7.5HP~40HP 3Ø 460V:7.5HP~75HP
3Ø 230V 3Ø 460V
1Ø 230V
3Ø 230V
IP66 NEMA4X 3Ø 230V IP66 NEMA4X 3Ø 460V
3Ø 460V
3Ø 230V 3Ø 575V
3Ø 460V
IP54 3Ø 230V IP54 3Ø 460V
3Ø 230V
3Ø 460V
3Ø 230V 3Ø 460V
03
LS Drive Comparison Table
Model name
Voltage & Capacity
Control Method Input Terminal Output Terminal
V/F Control Sensor-less Vector Sensored Vector Multifunction Terminal Analog Input (Current) Analog Input (Voltage) Relay Output Open Collector Output Analog Output
Enclosure Class
Keypad Remote Cable Brake Unit
EMC Filter
M100
1Ø 115V : 0.25~1HP 1Ø 230V : 0.125~3HP
Standard -
5 Inputs (P1~P5) -
1 Inputs (0~10V) 2 Outputs (5 port)
1 Outputs (0~10V)
IP20
LED 7-segment 1m/2m /3m /5m Standard built-in (2.0~3.0HP)
Standard built-in (0.5~3.0HP)
G100
3Ø 230V: 0.5~10HP 3Ø 460V: 0.5~10HP
Standard Standard
5 Inputs (P1~P5) 1 Inputs (0~20mA) 1 Inputs (0~10V) 2 Outputs (5 port)
1 Outputs (0~10V)
0.5~10.0HP:IP20 (Standard), UL Type 1 (Option)
LED 7-segment 1m/2m/3m/5m Standard built-in (0.5~10.0HP)
Standard built-in (0.5~10.0HP)
DC Reactor
Communications
Cooling System
Ambient Temperature
Ambient Humidity Storage Temperature Surrounding Environment
Altitude
Vibration Ambient Air Pressure
Alarm
Protective
Function
Trip
-
-
RS485 (Advanced I/O Standard built-in)
Modbus RTU (Standard built-in), CANopen, Profibus-DP, EtherNet/IP (Option)
-
Forced air cooling by fan
-10~50 (2.5% / current derating at 40 or above 75% of the rated current operable at 50); without any ice or frost
Relative humidity 95% RH or below (without any dew formation) -20 ~ 65 Non- corrosive gas, flammable gas, oil residue and dust at the indoor environment
1,000m above sea level (From 1,000m or more, voltage/output current derating by 1% for every 100m elevation; up to 4,000m)
9.8m/sec2 (1.0G) or below 70 ~ 106kPa Stall prevention, overload, light load, fan failure, keypad command loss, speed command loss
Overvoltage, overcurrent, undervoltage, external trip, grounding current detection, drive overheat, electric motor overheat, I/O phase open, overload protection, communication error, frequency command loss, hardware failure, cooling fan failure, no motor trip, etc.
04
LS Drive Solution
IP20(NEMA1)
S100
IP66(NEMA4X)
H100+
IP20(NEMA1)
iS7 IP66(NEMA12)
1Ø 230V 0.5~3.0HP 3Ø 230V 0.5~20HP 3Ø 460V 0.5~100HP
3Ø 230V 0.5HP~20HP 3Ø 460V 0.5HP~30HP
Standard
Standard
-
5 Inputs (P1~P5)
1 Input (0~10V or 0~20mA)
1 Output (3 port) 1 Output (2 port) 1 Output (0~10V or 0~20mA) Note 1)
3Ø 230V:1.0HP~125HP 3Ø 460V:1.0HP~800HP 3Ø 575V:1.0HP~125HP
Standard -
7 Inputs (P1~P7) 1 Input (0~20mA) 1 Input (0~10V)
5 Outputs 1 Output 1 Output (0~10V or 0~20mA)
3Ø 230V:1.0~100HP 3Ø 460V:1.0~600HP
3Ø 230V:1.0~30HP 3Ø 460V:1.0~30HP
Standard Standard Option 8 Inputs (P1~P8) 1 Input (0~20mA) 1 Input (0~10V, -10V~+10V) 2 Outputs (5 port) 1 Output (2 port) 2 Outputs (0~10V, 0~20mA)
0.5HP~100HP: IP20 (Standard), UL Type1 (Option)
0.5HP~30HP : IP66
1-800HP: IP20 (Standard) UL Type 1 (Option) 150-800HP :
Heatsink out the back(NEMA12)
200V class (1~30HP), 400V class (1~100HP) : IP20
200V class (40~100HP), 400V class 120~600HP: IP00
1.0~30HP: IP54
LED 7-segment : 0.5~30HP LCD graphic : 40~100HP
LED 7-segment : 0.5~30HP
LCD Graphic
LCD Graphic
1m/2m/3m/5m
1m/2m/3m/5m
1m/2m/3m/5m
Standard built-in (0.5~30HP) Option (40-100HP)
Standard built-in (0.5~30HP)
Standard built-in (1~40HP)
Standard built-in (0.5~30HP) Option (40-100HP)
Standard built-in (400V class 7.5~30HP)
Standard built-in
-
(400V class 1~75HP)
Standard built-in (1~30HP)
-
(400V class 150~800HP)
Standard built-in (400V class 40~100HP)
-
Standard built-in (400V class 50~800HP)
Standard built-in (200V class1~30HP) (400V class1~350HP)
-
RS485 (Standard built-in), Modbus TCP, EtherCAT, EtherNet/IP, PROFInet,
Profibus-DP, CANopen (Option)
Modbus RTU, Metasys N2, BACnet MS/TP,
Lonworks (Option)
Forced air cooling by fan
RS485 (Standard built-in), DeviceNet, Profibus-DP, Modbus TCP, R-Net, F-net, LonWorks, CC Link-IE, CANopen (option), EtherNet/IP, Profinet, RAPIEnet
Note 1) In case of 40~100HP, Analog 1 output(0~10V) is additionally provided.
05
M100
· 1Ø 115V : 0.25HP~1HP · 1Ø 230V : 0.125HP~3HP
06
Micro Drive
The Optimal compact drive That is Applicable to Small Machinery, Fans/Pumps and Conveyors.
Space efficiency is increased with a compact product design, side-by-side installation and standard installation of Din Rail. Product reliability is improved with a built-in C2 EMC filter and application of a new UL standard. We offer two I/O types (standard type and advanced type), frequently-used parameter group, built-in potentiometer and parameter copier/remote keypad options.
. J7
J$
J(" 4
. CompJ7act
J$
J(" 4
.TSphaecMeJ1e70ff0icDierinvceyiscasnmbaellJma$nadxicmoiszte-edffwecitthivsei.deJ-b(y-sid"e installati4on.
ConvenientUse
"VUP5VOJOH
"VUP5VOJOH
Din Rail installation is standard for the M100 Drive, A RJ45 Port is
provided for aconvenient conne"cVUtPio5VnOJwOHithperipheral devices. *1
*1
) AppliJc&ations J1"
J4
*1
· Refrigerant compressor, air conditioner, refrigerator
) ·HVACJi&ndustry
J1"
J4
) ··CPaacrgkoaJg&tienrgmminaaclhtrinanestfrearJn1lsinfeer("lCinoen
(vCeoynovr)eyor) J4
6-
6-
· CNC, Machinetool such as a lensgrinder, spinning wheel, etc.
6-
Product Type & Model
LSLV 0022 M100 - 1 E O F N S
'JFMEOFUXPSL 'JFMEOFUXPSL J1/&."" 'JFMEOFUXPSL J1/&."" J1/&.""
LS Low Voltage Drive Series
Motor Capacity 0001: 0.1kW~0022: 2.2kW
Series Name
Input Voltage S: 1Ø 100V-120V 1: 1Ø 200V-240V
Keypad E: LED Keypad
UL Type O: UL Open Type
EMC Filter F: Built-in EMC Filter (C2)
Reactor N: Non-Reactor
I/O A: Advanced
Energy Saving LV Drive
Main Features
Features Micro Size EMC Filter
DIN rail Installation
Quick Parameter Menu Potentiometer Global Standard Requirement
Description 85×135×100mm (W x H x D); Mini drive (based on 0.2kW) Filter that satisfies the following standard: EN61800-3 Category C2 (1st Environment)
DIN rail and wall mount to the rear and sides of the product with removal clips
Frequently-used and useful parameters can be listed in the Quick Parameter group
Standard potentiometer for analog setting Obtained CE certification and new UL 61800-5-1 standard
Benefits Reduced area for product installation and increased convenience
No space and expenses needed for additional filter to reduce electromagnetic noise. Fast and easy product installation that lasts less than 5 minutes and maximized space efficiency through side-by-side installation
Quick setting and improved operational convenience for the customer's application type
Easy and flexible operation setting
Ensures product reliability (improved quality of insulation distance)
Single Phase 100 ~ 120VAC (-15% ~ +10%)
Heavy Duty(CT)150% for 60 seconds
HP
Output Current
0.25
1.4
0.5
2.4
1
4.2
Model Number
Order Code
Dimensions Appox.
(in)
Weight
WXHXD
(lbs.)
LSLV0002M100-SEONNA 66440001
2.2
3.3 X 6.4 X 4.8
LSLV0004M100-SEONNA 66440002
2.2
LSLV0008M100-SEONNA 66440003 3.9 X 7.5 X 5.5 3.0
keypad
Built-in 7 Segment
LED Keypad
Additional Data
Reactor
Filter
NO
NO
Potentiometer
Built-in Potentiometer
Single Phase 200 ~ 240VAC (-15% ~ +10%)
Heavy Duty(CT)150% for 60 seconds
HP
Output Current
Model Number
Order Code
Dimensions Appox.
(in)
Weight
WXHXD
(lbs.)
Keypad
0.125 0.25
0.8
LSLV0001M100-1EOFNA 66430007
3.3 X 5.7 X 3.9 1.5
1.4
LSLV0002M100-1EOFNA 66430008
0.5
2.4
LSLV0004M100-1EOFNA 66430009
Built-in
3.3 X 6.4 X 4.8 2.2 7 segment
1
4.2
LSLV0008M100-1EOFNA 66430010
LED keypad
2
7.5
LSLV0015M100-1EOFNA 66430011
3.9 X 7.5 X 5.5 3.2
3
10
LSLV0022M100-1EOFNA 66430012
Additional Data
Reactor
Filter Potentiometer
NO
Built-in
Built-in
EMC Filter Potentiometer
Remote Cable with Keypad
Length 3.3 ft 6.6 ft 9.8 ft 16.4 ft
Model Number REMOTE 1M (LSLV-M100) REMOTE 2M (LSLV-M100) REMOTE 3M (LSLV-M100) REMOTE 5M (LSLV-M100)
Order Code 64170007 64170008 64170009 64170010
07
M100
Wiring
Micro Drive
Digital input Analog input
P1
P2 SW1
P3
NPN PNP
P4
P5
CM
Analog
AO
output
P24 24V
C2
Relay
output
A2
VR
C1 V1
SW2
A1
CM
VI
Analog input
B1 I2
SW3
ON OFF
Terminating Resistor
RJ45 Remote/ 485Com
Relay output
08
Memo
Energy Saving LV Drive
09
G100 General Drive
G100 Drive, General Purpose drive for use on Commercial and Industrial Applications.
The G100 is a general drive optimized for use in all
industrial sectors with powerful sensor-less functions,
improved hardware performance and proven high product
reliability.
J7
J$
. J("
J7
J$
J(" 4
4 Improved Torque Performance Through Powerful
Sensor-lessVector Control Functions
. it has nJ7ewly improved seJn$sorless.
J(" 4
· 3Ø230V: 0.5HP~1"V0UPH5PVOJOH
itmaintains hig"hVUPto5rVqOJuOHeperformanceatlow speed and'JFeMEffOiFcUiXePnSLtly
'JFMEcoOFnUXtrPoSLls the motor.
· 3Ø 460V: 0.5HP~10HP
J&
J1"
) J4
A Variety ofUser-convenientFunctio*1n s J1/&.""
*1 J1C/o&m."pa"ct installation is realized"tVhUPro5VuOgJOhHDin Rail mounting and
'JFMEOFUXPSL
.J&smidaek-ebsJy7iJt-1seidasei"liynsctoanllnaeticotnaJ.b$RleJwpJoi4trhtpisearitpthheerafrlodnJe(tvoicfet"sh.edrive
which
4 *1
J1/&.""
H igh Produc
tReliability
6-
)6-
Heat
reJ&sistanceandoveraJ1ll dur"abilityof
the
encJlo4sure
has been
significantly improved. Additionally, theinsulation distance and voltage
ratings
have
improved
with
our
de"sV
iUgPn5VwOJhOHichmeets
UL61800-5-1
standard. 6-
'JFMEOFUXPSL
A pplications
*1
Metal, elevator/escalator, textile machinery, shipping, food and
beverage, pulp/paper, coal mine, oil/gas, water treatment
) ·CHNoCis, tMJ(&aHcohisint,eGTaonotlr,yS,mTraoJl1lllefayn)"andPu·mCponveyJo4r
· General crane
· Mixer (Agitator)
·Winder (Loom, Knitting machine
)
6-
J1/&.""
Product Type & Model
LSLV 0022 G100 -2 E O F N
LS Low Voltage Drive Series
Motor Capacity 0004: 0.4kW~0075: 7.5kW Series Name Input Voltage 2: 3Ø 200V-240V / 4: 3Ø 380V-480V
Keypad E: LED Keypad
UL Type O: UL Open Type
EMC Filter N: Non Built-in EMC filter / F: Built-in EMC filter (C3)
Reactor N: Non-Reactor
10
Energy Saving LV Drive
Main Features
Features Improved Control Performance
Description Improved sensor-less function and simplified setup
Benefits
Powerful torque performance at low speed and high load conditions
Din rail Mounting and Side-by-side Installation
2mm installation space between products
Fast and simple product installation that takes less than 5 minutes; increased space efficiency for panels
RJ45 Port at the Front Side of the Product
Various Field Communication Network Support
Quick Parameter Menu
EMC Filter
Easily connected to peripheral devices; and parameters can be copied (read/write) without taking the product out from its box or connecting power
Modbus, Profibus-DP, CANopen and Ethernet IP communication network support
Frequently-used and useful parameters are set in Quick Parameter Menu (Favorites)
Filter that meets the Category C3 standard
Enhanced convenience in setup and connection with peripheral devices
Connectible with widely-used field networks
Quick setting with operational convenience according to the customer's application Reduced electromagnetic noise and no additional space and expenses for filter installation is necessary
Improved Heat-resisting Property and Intensity of Enclosures
Heat resistance and overall durability of the enclosure Significantly improved product reliability and
has significantly increased
MTTF 27 years guaranteed
Network Option, Installation Convenience
Communication network option can be easily connected without removing covers. Dual port ethernet support
Global Standard Requirement
Obtained a certification of CE and new UL 61800-5-1 standard
Easy and fast removable communication network option
Product reliability guaranteed (improved quality of insulation distance)
Control
Control Mode Frequency Setting Resolution Frequency Level V/F Pattern Overload Tolerance Torque Boost
V/F control, Slip compensation, Sensorless vector Digital command: 0.01Hz; analog command: 0.06Hz (based on 60Hz) 1% of the peak output frequency Linear, square torque reduction, user V/F Heavy duty: 150% 1min, Normal duty: 120% min Manual torque boost: auto torque boost
Operation
Operation Mode Frequency Setting
Operation Function
Input
Multifunction Terminal P1~P5
Output
Multifunctional Relay Terminal
Analog Output
Keypad / Terminal block / Communication network operation options
Analog method: -10~10 (V), 0~10 (V), 4~20 (mA); digital method: keypad input
PID control; 3-wire operation; frequency limit; second motor; forward/backward rotation prohibited; power switching; speed search; power braking; up-down operation; DC braking; frequency jump; slip compensation; auto restart; auto tuning; energy buffering operation; flux braking; and Fire Mode
NPN (Sink) / PNP (Source) options
Function: Forward operation; backward operation; reset; external trip; emergency trip; jog operation; switching frequency high, middle, low; acceleration/deceleration by stage high, middle, low; DC braking at pause; second motor option; frequency increase; frequency decline; 3-wire operation; switching to general operation during PID operation; switching to the body operation during option operation; analog command fixed frequency; acceleration or deceleration stop option
Fault output and inverter operation mode output
(N.O., N.C.) AC 250V, 1A or below, DC 30V, 1A or below
12Vdc: Frequency, output current, output voltage, DC voltage options
11
G100 General Drive
Three Phase 200 ~ 240 VAC (-15% ~ +10% )
UL Three Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Normal Duty(VT)120% for 60 seconds
Output
Output
HP
Current
HP
Current
(Amps)
(Amps)
0.5
2.5
1
3.1
UL Single Phase Ratings
Heavy Duty(CT) Single Phase
Normal Duty(VT) Single Phase
Output
Output
HP
Current
HP
Current
(Amps)
(Amps)
-
1.5
-
2.0
1
5.0
2
6.0
0.5
2.8
0.75
3.6
2
8.0
3
9.6
1
4.6
1
5.9
3
11.0
5
12.0
1.5
6.1
1.5
6.7
5
17.0
7.5
18.0
2
9.3
3
9.8
7.5
24.0
10
30.0
3
12.8
5
16.3
10
32.0
15
40.0
5
17.4
7.5
22.0
Model Number
LSLV0004G100-2EONN LSLV0008G100-2EONN LSLV0015G100-2EONN LSLV0022G100-2EONN LSLV0040G100-2EONN LSLV0055G100-2EONN LSLV0075G100-2EONN
Three Phase 380 ~ 480 VAC (-15% ~ +10%)
UL Three Phase Ratings
UL Single Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Output
HP
Current
(Amps)
0.5
1.3
Normal Duty(VT)120% for 60 seconds
Output
HP
Current
(Amps)
1
2.0
Heavy Duty(CT) Single Phase
Output
HP
Current
(Amps)
-
0.7
Normal Duty(VT) Single Phase
Output
HP
Current
(Amps)
0.5
1.3
1
2.5
2
3.1
0.5
1.4
0.75
1.9
2
4.0
3
5.1
1
2.1
1
2.8
3
5.5
5
6.9
1
2.8
2
3.6
5
9.0
7.5
10.0
3
4.9
3
5.4
7.5
12.0
10
16.0
3
6.4
5
8.7
10
16.0
15
23.0
5
8.7
7.5
12.6
Model Number
LSLV0004G100-4EOFN LSLV0008G100-4EOFN LSLV0015G100-4EOFN LSLV0022G100-4EOFN LSLV0040G100-4EOFN LSLV0055G100-4EOFN LSLV0075G100-4EOFN
Remote Cable with Keypad
Length 3.3 ft 6.6 ft 9.8 ft 16.4 ft
Model Number REMOTE 1M (LSLV-G100) REMOTE 2M (LSLV-G100) REMOTE 3M (LSLV-G100) REMOTE 5M (LSLV-G100)
Order Code 64180001 64180002 64180003 64180004
12
Energy Saving LV Drive
Order Code
6040000100 6040000200 6040000300 6040000400 6040000600 6040000700 6040000800
Dimensions(in) W X H X D
Approx. Weight (lbs.)
Conduit Connection Box NEMA1 Enclosure
Order Code
3.4 X 6.5 X 5.5
2.3
64180005
4.0 X 7.0 X 6.3
3.1
5.3 X 7.6 X 6.3
4.2
7.1 X 9.5 X 6.0
7.0
64180006 64180007 64180008
Keypad
Built-in 7 segment LED keypad
Additional Data
Reactor
Filter
NO
NO
Potentiometer
Built-in Potentiometer
Order Code
6041002100 6041002200 6041002300 6041002400 6041002600 6041002700 6041002800
Dimensions(in) W X H X D
Approx. Weight (lbs.)
Conduit Connection Box NEMA1 Enclosure
Order Code
3.4 X 6.5 X 5.5
2.3
64180005
4.0 X 7.0 X 6.3
3.1
5.3 X 7.6 X 6.3
4.2
7.1 X 9.5 X 6.0
7.0
64180006 64180007 64180008
Keypad
Built-in 7 segment LED keypad
Additional Data
Reactor
Filter
Potentiometer
NO
Built-in EMC Filter
Built-in Potentiometer
Option
Ethernet I/P
Model Number Ethernet(LSLV-G100),CENT-G100
Order Code 64180009
13
G100
Wiring
General Drive
3-phase Voltage Source
R (L1) S (L2) T (L3)
DBR External DBR (Option)
B1
B2
U
V
W
Motor
M
Ground
24 24V Power P1 FX P2 RX
SW1
NPN
PNP
Mode
P3 BX
P4 RST P5 Speed-L
Power Terminal for
VR Setting Frequency
Analog Input (V)
V1
Frequency Setting
Analog Input (I)
I2
Frequency Setting
CM
Common Terminal
CM Common Terminal
AO
Analog Output (I)
A1
B1
Relay Output 1 (Default: Trip)
S+
RS485 Communication
C1
SW2
Input Terminal
S-
ON
OFF
A2 C2
Relay Output 2 (Default: Run)
Terminating Resistor
14
Memo
Energy Saving LV Drive
15
S100 Standard Drive
Standard Drive, S100
J7
J$
J("
The S100 is LS's high-performance standard drive offering. It offers powerful sensorless vector control, and a diverse range of user friendly functions and features. The S100 features the ability to run permanent magnet motors, has a redundant safetorque off(STO) circuit, and offers a wide array of field bus communication options. An IP66/NEMA4X option up to 30HP is available for dusty, wet, or harsh environments.
4
J7 J$
J("
4
Efficient
Space
Utilization
J7
J$
J("
4
Space efficiency is maximized with its compact size, which is 40% smaller than the original product, and the ability of side-by-side
installation.
"VUP5VOJOH
'JFMEOFUXPSL
Various Field Network Support
IP20
"VUP5VOJOH
1Ø 230V0.5HP~3.0H"PVUP5VOJOH
3Ø 230V 0.5HP~20HP
*1 'J1JFMET/Oh&FeU.X"dPSrL"ive supports the following networks: EtherCAT, EtherNet/IP,
. J7 'JFMEPOroFUfXiPbSuL s-DP, Modbus TCJP$, CANopen and etc J("
4
J&3Ø
460V
0.5HJP1~10"0HP
IP66
J4
*1 J1IP/&6.6"/" NEMA4X
*1 J1/&.""
The S100 has been tested for IP66 and NEMA4X (Washdown) standards.
J&NEMA4X 3Ø 2J310V0".5H
P~20HP J4
J&NEMA4X 3Ø 4J610V0".5HP~30HP J4
This makes the S100 ideal for food and beverage processing or any
6- application withawet, dusty, o"rVcUPo5nVtOaJOmHinant filled environment.
'JFMEOFUXPSL
6- Applications
*1 J1/&.""
6-
Applied to the following industries: metal, elevator/escalator, textile
machinery, shipping, food and beverage, pulp/paper, coal mine,
oil/gas and water treatment
)
J&
J1"
J4
· Hoist (hoist, gantry, trolley)
· Centrifugal separator
· Winder (loom, knitting machine) · General crane
·Mixer (agitator)
· Conveyor
6-
· Compressor
Product Type & Model
LSLV 0055 S100 - 4 E O F N S
LS Low Voltage Drive Series Motor Capacity 0004: 0.4kW~0750: 75kW Series Name
Input Voltage 1: 1Ø 200~240V / 2: 3Ø 200~240V / 4: 3Ø 380~480V Keypad E: LED Keypad / C: LCD Keypad
UL Type O: UL Open Type / X-IP66
EMC Filter N: Non-EMC / F: Built-in EMC Reactor N: Non-Reactor / D: Built-in DCL
I/O M: 3.5mm / S-5mm
16
Energy Saving LV Drive
Main Features
Features Sensor-less Control and Static-type/Rotation-type Auto Tuning Product Size Reduction and Side-by-side Installation
Various Field Networks
Compact PLC Function Option DC Reactor
Safe Torque Off (STO)
EMC Filter
IP66 (NEMA 4X) Enclosure Option
Description
Motor tuning is possible without rotating the motor when the motor is installed at a place where rotation is impossible or when the system is already installed.
Benefits Accurate velocity and torque control
The product size has been reduced up to 60% of its original size; simple replacement of cooling fans; installation span between products is about 2mm
EtherCAT, PROFINET, Profibus-DP, Ethernet IP, Modbus TCP and CANopen communication network support
With a combination of various function blocks, a simple PLC sequence programming is possible
Built-in DC reactor 400V, 30~75kW
Reduced installation area; when multiple drives are installed, the control panel size is significantly reduced
Possible to connect to all widely-used field networks; comfortable maintenance of option cards and easy mounting
High-level control programming with only the drive and without the external PLC
Improved power factor and THD reduction
Redundant safe input circuit standard; safe input function meets the following standards: EN 61508 SIL2 (EN60204-1, Stop category 0)
Satisfies the safety standards of systems with a built-in safety design
Filter satisfying Category C3 (Class A) 2nd Environment CE standard 1-phase 200V 0.4~2.2kW (C2) 3-phase 400V 0.4~75kW (C3)
Completely protected from foreign substances such fine dust and water sprayed with a high-pressure sprayer
Reduced electromagnetic noise; additional space and expense for parts are not required
Inverters can be used even when exposed to the poor environment
Control
Control Mode Frequency Setting Resolution Frequency Level V/F Pattern Overload Tolerance Torque Boost
V/F control, Slip compensation, Sensorless vector, PM sensorless Digital command: 0.01Hz; analog command: 0.06Hz (peak frequency: 60Hz) 1% of the peak output frequency Linear, square torque reduction, user V/F Heavy duty: 150% 1min, Normal duty: 120% min Manual torque boost: auto torque boost
Operation
Operation Mode Frequency Setting
Operation Function
Input
Multifunctional Terminal Standard I/O (5 input) Multiple I/O (7 input)
Output
Analog Input Pulse Train
Multifunctional Open Collector Terminal
Multifunctional Relay Terminal
Analog Output Pulse Train
Keypad/ Terminal block / Communication network options
Analog method: -10~10 (V), 0~10 (V), 4~20 (mA); digital method: keypad, pulse train input
PID control; up-down operation; 3-wire operation; DC braking; frequency limit; frequency jump; secondary function; slip compensation; forward/backward rotation prohibited; auto restart; power switch; auto tuning; speed search; energy buffering; power braking; flux braking; leakage-reduced operation; Fire Mode
NPN (Sink) / PNP (Source) option
Function: Forward operation; backward operation; reset; external trip; emergency trip; jog operation; switching frequency high, middle, low; acceleration/deceleration by stage high, middle, low; DC braking on stop; second motor option; frequency increase; frequency decline; 3-wire operation; switching to general operation during PID operation; switching to body operation during option operation; analog command fixed frequency; acceleration/deceleration stop option
V1: -10~10V, V2: 0~10V / I2 4~20mA options
0~32kHz, Low Level: 0~2.5V, High Level: 3.5~12V
Fault output and drive operation mode output
DC 24V, 50mA or below (N.O., N.C.) AC 250V 1A or below, DC 30V 1A or below
0~12Vdc/0~24mA: selectable among frequency, output current, output voltage and DC terminal voltage Up to 32kHz, 10~12 (V)
17
S100
Standard Drive (NEMA 1*)
* Requires NEMA 1 option kit
Single Phase 200 ~ 240VAC (-15% ~ +10%)
UL Three Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Normal Duty(VT)120% for 60 seconds
Heavy Duty(CT) Single Phase Input
Output
Output
HP
Current
HP
Current
HP
(Amps)
(Amps)
0.5
2.5
1
3.1
-
1
5.0
2
6.0
-
2
8.0
3
10.0
-
3
11.0
5
12.0
-
Amps
-
UL Single Phase Ratings
Heavy Duty(CT) 3 Phase Output
Normal Duty(VT) Single Phase Input
Amps
HP
Amps
-
-
-
-
-
-
-
-
-
-
-
-
Three Phase 200 ~ 240 VAC (-15% ~ +10% )
UL Three Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Normal Duty(VT)120% for 60 seconds
Heavy Duty(CT) Single Phase Input
Output
Output
HP
Current
HP
Current
HP
(Amps)
(Amps)
0.5
2.5
1
3.1
-
1
5.0
2
6.0
0.5
2
8.0
3
10.0
1
3
11.0
5
12.0
1.5
5.4
17.0
7.5
18.0
2
7.5
24.0
10
30.0
3
10
32.0
15
40.0
5
15
46.0
20
56.0
7.5
20
60.0
25
69.0
10
Amps
2.2 4.9 8.4 11.8 18.5 25.8 34.9 50.8 66.7
UL Single Phase Ratings
Heavy Duty(CT) 3 Phase Output
Normal Duty(VT) Single Phase Input
Amps
HP
Amps
1.5
3.0
2.8
0.75
6.3
4.6
1
10.8
6.1
1.5
13.1
9.3
3
19.4
13.0
5
32.7
18.0
7.5
44.2
26.0
10
62.3
33.0
10
77.2
Three Phase 380 ~ 480 VAC (-15% ~ +10%)
UL Three Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Normal Duty(VT)120% for 60 seconds
Heavy Duty(CT) Single Phase Input
Output
Output
HP
Current
HP
Current
HP
(Amps)
(Amps)
0.5
1.3
1
2.0
-
1
2.5
2
3.1
0.5
2
4.0
3
5.1
0.75
3
5.5
5
6.9
1
5.4
9.0
7.5
10.0
3
7.5
12.0
10
16.0
3
10
16.0
15
23.0
5
15
24.0
20
30.0
7.5
20
30.0
25
38.0
10
25
39.0
30
44.0
10
30
45.0
40
58.0
15
40
61.0
50
75.0
20
50
75.0
60
91.0
25
60
91.0
75
107.0
30
75
110.0
100
142.0
40
100
152.0
120
169.0
50
Amps
1.1 2.4 4.2 5.9 9.8 12.9 17.5 26.5 33.4 43.6 50.7 56 69 85 103 143
UL Single Phase Ratings
Heavy Duty(CT) 3 Phase Output
Normal Duty(VT) Single Phase Input
Amps
HP
Amps
0.8
0.5
2.0
1.5
0.75
3.3
2.3
1
5.5
3.1
2
7.5
5.4
3
10.8
7.1
5
17.5
9.5
7.5
25.4
15.0
10
33.4
18.0
15
42.5
23.0
15
49.5
27.0
20
65.7
32.0
25
69.0
39.0
30
85.0
47.0
40
100.0
57.0
50
134.0
78.0
60
160.0
Normal Duty(VT) 3 Phase Output
Model Number
Amps
-
LSLV0004S100-1EONNS LSLV0008S100-1EONNS LSLV0015S100-1EONNS LSLV0022S100-1EONNS
Normal Duty(VT) 3 Phase Output
Model Number
Amps
1.8 3.3 5.7 6.6 9.9 16.0 22.0 31.0 38.0
LSLV0004S100-2EONNS LSLV0008S100-2EONNS LSLV0015S100-2EONNS LSLV0022S100-2EONNS LSLV0040S100-2EONNS LSLV0055S100-2EONNS LSLV0075S100-2EONNS LSLV0110S100-2EONNS LSLV0150S100-2EONNS
Normal Duty(VT) 3 Phase Output
Model Number
Amps
1.3 1.9 3.0 3.9 5.9 9.5 14.0 18.0 23.0 27.0 35.0 39.0 47.0 55.0 73.0 87.0
LSLV0004S100-4EONNS LSLV0008S100-4EONNS LSLV0015S100-4EONNS LSLV0022S100-4EONNS LSLV0040S100-4EONNS LSLV0055S100-4EOFNS LSLV0075S100-4EOFNS LSLV0110S100-4EOFNS LSLV0150S100-4EOFNS LSLV0185S100-4EOFNS LSLV0220S100-4EOFNS LSLV0300S100-4CONDS LSLV0370S100-4CONDS LSLV0450S100-4CONDS LSLV0550S100-4CONDS LSLV0750S100-4CONDS
18
Energy Saving LV Drive
Order Code
6033000100 6033000200 6033000300 6033000400
Dimensions(in) W X H X D
2.7 X 5.0 X 5.0 3.9 X 5.0 X 5.1 3.9 X 5.0 X 5.7 5.5 X 5.0 X 5.7
Approx. Weight (lbs.)
1.9 2.9 3.3 4.9
Conduit Connection Box NEMA1 Enclosure
Flange Mount Kit Heat Sink Out
the Back
Order Code
64150004 64150005 64150005 64150006
Order Code
64150013 64150014 64150014 64150015
Keypad
Built-in 7 segment LED keypad
Additional Data Reactor NO
Filter NO
Order Code
6030000100 6030000200 6030000300 6030000400 6030000600 6030000700 6030000800 6030000900 6030001000
Dimensions(in) W X H X D
2.7 X 5.0 X 4.8 2.7 X 5.0 X 5.0 3.9 X 5.0 X 5.1 3.9 X 5.0 X 5.7 5.5 X 5.0 X 5.7 6.3 X 9.1 X 5.5 7.1 X 11.4 X 6.4 8.7 X 13.8 X 7.4
Approx. Weight (lbs.)
1.9 1.9 3.3 3.3 5.1 7.3 10.1 10.1
Conduit Connection Box NEMA1 Enclosure
Flange Mount Kit Heat Sink Out
the Back
Order Code
64150004 64150004 64150005 64150005 64150006
64150007
64150008 64150009
Order Code
64150013 64150013 64150014 64150014 64150015
64150016
64150017 64150018
Keypad
Built-in 7 segment LED keypad
Additional Data Reactor NO
Filter NO
Order Code
6031000100 6031000200 6031000300 6031000400 6031000600 6031000700 6031000800 6031000900 6031001000 6031001100 6031001200 6031006000 6031006100 6031006200 6031001600 6031001700
Dimensions(in) W X H X D
2.7 X 5.0 X 4.8 2.7 X 5.0 X 5.0 3.9 X 5.0 X 5.1 3.9 X 5.0 X 5.7 5.5 X 5.0 X 5.7 6.3 X 9.1 X 5.5
7.1 X 11.4 X 6.4
8.7 X 13.8 X 7.4 10.8 X 17.7 X 11.2 12.8 X 20.1 X 11.2
12.8 X 21.7 X 12.2
Approx. Weight (lbs.)
1.9 1.9 3.3 3.3 6.0 7.5
10.6
16.5 57.3 77.2
94.8
Conduit Connection Box NEMA1 Enclosure
Flange Mount Kit Heat Sink Out
the Back
Order Code 64150004 64150004 64150005 64150005 64150006 64150007
64150008
64150009 64150010 64150011
64150012
Order Code 64150013 64150013 64150014 64150014 64150015 64150016
64150017
64150018 64150019 64150020
64150021
Keypad
Built-in 7 segment LED
keypad
Built-in LCD keypad
Additional Data Reactor
NO
Built-in DC
Reactor
Filter NO
Built-in EMC Filter
NO
19
S100
Standard Drive (NEMA 4X)
Three Phase 200 ~ 240 VAC (-15% ~ +10% )
UL Three Phase Ratings
UL Single Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Heavy Duty(CT) Single Phase Input
Heavy Duty(CT) 3 Phase Output
HP
Output Current (Amps)
HP
0.5
2.5
-
1
5.0
0.5
2
8.0
1
3
11.0
1.5
5
16.0
2
7.5
24.0
3
10
32.0
5
15
46.0
7.5
20
60.0
10
Amps
2.2 4.9 8.4 11.8 17.5 25.8 34.9 50.8 66.7
Amps
1.5 2.8 4.6 6.1 8.8 13.0 18.0 26.0 33.0
Model Number
LSLV0004S100-2EXNNS,IP66 LSLV0008S100-2EXNNS,IP66 LSLV0015S100-2EXNNS,IP66 LSLV0022S100-2EXNNS,IP66 LSLV0037S100-2EXNNS,IP66 LSLV0055S100-2EXNNS,IP66 LSLV0075S100-2EXNNS,IP66 LSLV0110S100-2EXNNS,IP66 LSLV0150S100-2EXNNS,IP66
Three Phase 380 ~ 480 VAC (-15% ~ +10%)
UL Three Phase Ratings
UL Single Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Heavy Duty(CT) Single Phase Input
Heavy Duty(CT) 3 Phase Output
HP
Output Current (Amps)
HP
0.5
1.3
-
1
2.5
0.5
2
4.0
0.75
3
5.5
1
5
8.0
2
7.5
12.0
3
10
16.0
5
15
24.0
7.5
20
30.0
10
25
39.0
10
30
45.0
15
Amps
1.1 2.4 4.2 5.9 8.7 12.9 17.5 26.5 33.4 43.6 50.7
Amps
0.8 1.5 2.3 3.1 4.8 7.1 9.5 15.0 18.0 23.0 27.0
Model Number
LSLV0004S100-4XNNS,IP66 LSLV0008S100-4XNNS,IP66 LSLV0015S100-4XNNS,IP66 LSLV0022S100-4XNNS,IP66 LSLV0037S100-4XNNS,IP66 LSLV0055S100-4XNNS,IP66 LSLV0075S100-4XNNS,IP66 LSLV0110S100-4XNNS,IP66 LSLV0150S100-4XNNS,IP66 LSLV0110S100-4XNNS,IP66 LSLV0150S100-4XNNS,IP66
Remote Cable with Keypad
Length 6.6 ft 9.8 ft
Model Number REMOTE 2M (LSLV-S100) REMOTE 3M (LSLV-S100)
Order Code 64110009 64110010
20
Energy Saving LV Drive
Order Code
Dimensions(in) W X H X D
Approx. Weight (lbs.)
6030001800
7.1 X 10.1 X 6.9
7.9
6030001900
6030002000
11.5
6030002100
8.7 X 10.2 X 7.9
11.7
6030002200
12.3
6030002400
9.8 X 12.9 X 8.9
19.8
6030002500
6030002600
10.2 X 15.7 X 9.7
21.2
6030002700
11.8 X 18.1 X 9.8
26.7
Frame Size
1 (NEMA4X)
2 (NEMA4X)
3 (NEMA4X) 4 (NEMA4X) 5 (NEMA4X)
Additional Data
Keypad
Reactor
Filter
Built-in
7 segment
NO
NO
LED keypad
Order Code
Dimensions(in) W X H X D
Approx. Weight (lbs.)
6031004200
7.1 X 10.1 X 6.9
8.2
6031004300
6031004400
11.7
6031004500
8.7 X 10.2 X 7.9
12.1
6031004600
12.3
6031004800
9.8 X 12.9 X 8.9
19.4
6031004900
6031005000
21.2
10.2 X 15.7 X 9.7
6031005100
21.6
6031005200
11.8 X 18.1 X 9.8
27.3
6031005300
Frame Size
1 (NEMA4X) 2 (NEMA4X) 3 (NEMA4X) 4 (NEMA4X) 5 (NEMA4X)
Additional Data
Keypad
Reactor
Filter
Built-in
7 segment
NO
NO
LED keypad
Option
CAN Open Profibus-DP Ethernet IP & Modbus TCP (Single port) Ethernet IP & Modbus TCP (Dual port) 64150003
Profinet Extension I/O LCD Keypad (Graphic) USB-RJ45 Cable
Model Number CANOpen for LSLV-S100 Profibus-DP for LSLV-S100 Ethernet IP & Modbus TCP for LSLV-S100 Ethernet IP & Modbus TCP for S100 Series EtherCAT for LSLV-S100 Profinet for LSLV-S100 Extension I/O for LSLV-S100 LCD Keypad for LSLV-S100 RS232 to USB Converter for LSLV-S100
Order Code 64150001 64150002 64150003 64150042 64150034 64150035 64150025 64110038 64090353
21
S100
Wiring (0.5HP ~30HP)
Standard Drive
P1(+) P2(+)
B
R (L1)
S (L2)
T (L3)
N (-)
Multi-function Input (Default value)
P1 FX
Terminal resistor
P2 RX
ON OFF
P3 BX P4 RST
PNP NPN
P5 Speed-L
T1 Pulse input
CM
Sequence Common Terminal
Pot
Analog Input
VR Power terminal for setting frequency
12V/100mA
V1 Frequency setting (Voltage)
-10V~10V
CM Common terminal
V2/I2
V Analog Input
I
Frequency setting
(Voltage/Current)
0~10V/4~20mA
U V W
Analog Output IO VO
S-
S+
RS485 Communication Input terminal
SG
AO Analog output
0~10 V/0~20mA
P24 External 24V power
Q1
Multi-function terminal
(Open-collector)
EG Common terminal
SC
Safety function
SA
SB
C1
Relay output (Fault signal output)
A1
B1
Default is marked in blue.
22
Wiring (40HP ~100HP)
P2(+)
Energy Saving LV Drive
P3(+)
R (L1) S (L2) T (L3)
U
V
W
N (-)
Multi-function Input terminal (Default value)
Pot
Analog Input
Safety function
P1 FX
Terminal resistor
P2 RX P3 BX
ON OFF
P4 RST
PNP NPN
P5 Speed-L
P6 Speed-M
P7 Speed-H
CM
Sequence Common Terminal
Analog Output IO VO
VR Power terminal for setting frequency
12V/100mA
V1 Frequency setting (Voltage)
-10V~10V
CM Common terminal
V2/I2
V Analog Input
I
Frequency setting
(Voltage/Current)
0~10V/4~20mA
TI Frequency setting (Pulse train)
0~10V/0~32kHz
Relay output (Fault signal output)
SC
SA
Relay output (Run)
SB
S-
S+
RS485 Communication Input terminal
SG
AO1
Analog output 0~10V/0~20mA
AO2
Analog output 0~10V
TO
Pulse output 0~32 kHz
P24 External 24V power
Q1 Multi-function terminal
(Open-collector)
EG Common terminal
C1 A1 B1
A2 C2
Default is marked in blue.
23
H100 +
· 3Ø 230V:1.0HP~125HP · 3Ø 460V:1.0HP~800HP · 3Ø 575V:1.0HP~125HP
24
Fan & Pump Drive
.
J7
J$
J(" 4
Significant Energy Savings With
LS DriveSolutions
.
J7
J$
J(" 4
The H100+ Drivewas develop"VeUPd5tVoOJObHuild an environmentfriendly systemthat realizes significant energy savingsin the
'JFMEOFUXPSL
commercial andindustrial fieldof fans/pumps andwater *1 J1/&.""
treatment applications based"VoUPn5VlOeJOaHding drive solutions.
'JFMEOFUXPSL
)
J&
J1"
System Protection
J4
*1 J1/&.""
To protect your pump and application, the following functions are6-
) providJe&dfor users: Soft JF1ill;st"art and stop slopJ4e adjustment; valve
deceleration time setting; multi-motor control; and underload
detection, pipebroken, pump cle
an
.
J7
J$
J("
46-
O ptimizedfor HVAC andWater Treatment
User-friendly functions for convenient use of fans/pumps such as
Fire mode, Lead lag, auxiliary motor PID compensation and load
tuning.
"VUP5VOJOH
'JFMEOFUXPSL
Applications
· Building · Metal · Pulp/paper · Coal mine
· Oil/gas and water treatment; (fan/pump, dryer)
)
J&
J1"
J4
Product Type & Model
*1 J1/&.""
6-
LSLV 0008 H100 - 4 C O F N(PLUS)
LS Low Voltage Drive Series
Motor Capacity 0008: 0.75kW~5000: 500kW
Series Name
Input Voltage 2: 3Ø 200~240 (V) 4: 3Ø 380~480 (V) 5: 3Ø 525~600 (V
Keypad Type C: LCD Keypad
UL Type O: UL Open E: UL Type1
EMC Filter F: Built-in EMC N: Non EMC
Reactor D: Built-in DC Reactor N: Non DC Reactor PLUS: Sub Series Name
Energy Saving LV Drive
Main Features
Features HVAC-only Features
Fan/Pump Protection Features
Built-in EMC Filter
Description
Multi Motor Control, PID operation, flow (flux) compensation, scheduling operation, lead-lag function
Protective functions include Soft Fill; valve deceleration time setting; pump clean; pipe breakage level detection; Underload Detection; lubrication Fire Mode
400V 5.5~30kW, 110~500kW built-in(C3) 400V 37~500kW built-in option (C3) With a filter, 75~90kW meets the EMC standard
Various Field Networks
RS-485 and BACnet network support for general HVAC system; Modbus-RTU, Metasys N2 and LonWorks options
Reduced Product Size and Side-by-Side Installation
DC Reactor
Global Standard Requirement
The product size is reduced up to 60% of its original size; simple replacement of cooling fans; installation span between products is about 2mm
400V 37~500kW products have a built-in DC reactor
UL Plenum-Rated; obtained a certificate of new UL 61800-5-1 (improved quality of insulation distance)
Benefits
Optimized operation for HVAC applications
Support for optimized fan/pump system performance; extended life of machinery with load; and reduced maintenance cost
Reduced electromagnetic noise and additional space and cost for parts unnecessary
Connectable with all widely-used field networks; simple maintenance of option cards and easy mounting
Reduced installation area; and when installing multiple motors, the control panel size is significantly reduced Improved power factor; and THD reduction Product reliability enhanced as it meets the new global standard
Control
Control Mode Frequency Setting Resolution Frequency Level V/F Pattern Overload Tolerance Torque Boost
V/F control, Slip compensation Digital command: 0.01Hz Analog command: 0.06Hz (based on 60Hz) 1% of the peak output frequency Linear, square torque reduction, user V/F 0.75~90kW rated current: 120% 1min 110~500kW rated current: 110% 1min Passive torque boost; auto torque boost
Operation
Operation Mode Frequency Setting
Operation Function
Input
Multifunctional Terminal (7 inputs)
Pulse Train
Multifunctional Open Collector Terminal
Output
Fault Relay Terminal
Multifunctional Relay Terminal Analog Output Pulse Train
Keypad, Terminal block, Communication network options
Analog method: -10 ~ 10V, 0 ~ 10V, 0 ~ 20mA
Digital method: keypad, pulse train input
PID control; 3-wire operation; frequency limit; secondary function; forward/backward rotation prohibited; power switch; speed search; power brake; leakage-reduced operation; up-down operation; DC braking; frequency jump; slip compensation; auto restart; auto tuning; energy buffering operation; flux braking; energy saving operation
PNP(Source), NPN(Sink) options According to the parameter setting of IN-65~71 codes, the following functions can be set.
Forward operation; reset; emergency trip; switching frequency high/middle/low; DC braking upon stop; frequency increase; 3-wire operation; acceleration or deceleration stop; MMC interlock; backward operation; external trip; job operation; acceleration/deceleration by stage high/middle/low; second motor option; frequency decline; analogue command fixed frequency; switching to the general operation during PID operation; Pre Heat; pump cleaning; RTC (time event function)
0~32kHz, Low Level: 0~0.8V, High Level: 3.5~12V
DC26V, 50mA or below
Fault output and drive operation mode N.O.: AC 250V, 2A or below; DC 30V, 3A or below
output
N.C.: AC 250V, 1A or below; DC 30V, 1A or below
AC250V, 5A or below, DC30V, 5A or below
0~12Vdc(0~20mA): Frequency, output current, output voltage, DC voltage options Up to 32kHz, 0~12V
25
H100+ Fan & Pump Drive
Three Phase 200 ~ 240 VAC (-15% ~ +10% )
UL Three Phase Ratings
UL Single Phase Ratings
Normal Duty(VT) 120%(~125HP) / 110%(150~800HP) for 60 seconds
Heavy for
Duty(VT)120% 60 seconds
Normal Duty(VT) Single Phase Output
HP
Output Current
HP
Output Current
HP
Amps
1
5
0.5
2.5
0.5
2.9
2
8
1
5
1
4.4
3
12
2
8
1.5
6.4
5
16
3
11
2
8.4
7.5
22
5
17
3
11
10
30
7.5
24
5
16
15
42
10
32
5
23
20
56
15
46
7.5
30
25
69
20
60
10
37
30
82
25
68
15
45
30
82
25
68
15
45
40
110
30
81
20
58
40
110
30
81
20
58
50
142
40
106
25
78
60
169
50
136
30
92
75
223
60
169
40
122
100
264
75
195
50
145
125
325
100
255
60
178
Model Number
LSLV0008H100-2CONN(PLUS_NEW) LSLV0015H100-2CONN(PLUS_NEW) LSLV0022H100-2CONN(PLUS_NEW) LSLV0037H100-2CONN(PLUS_NEW) LSLV0055H100-2CONN(PLUS_NEW) LSLV0075H100-2CONN(PLUS_NEW) LSLV0110H100-2CONN(PLUS_NEW) LSLV0150H100-2CONN(PLUS_NEW) LSLV0185H100-2CONN(PLUS_NEW) LSLV0220H100-2COND(PLUS_NEW) LSLV0220H100-2COFD(PLUS_NEW) LSLV0300H100-2COND(PLUS_NEW) LSLV0300H100-2COFD(PLUS_NEW) LSLV0370H100-2COFD(PLUS_NEW) LSLV0450H100-2COFD(PLUS_NEW) LSLV0550H100-2COFD(PLUS_NEW) LSLV0750H100-2COFD(PLUS_NEW) LSLV0900H100-2COFD(PLUS_NEW)
Three Phase 380 ~ 480 VAC (-15% ~ +10%)
UL Three Phase Ratings
UL Single Phase Ratings
Normal Duty(VT) 120%(~125HP) / 110%(150~800HP) for 60 seconds
Heavy for
Duty(VT)120% 60 seconds
Normal Duty(VT) Single Phase Output
HP
Output Current
HP
Output Current
HP
Amps
1
2.5
0.5
1.3
0.5
1.6
2
4
1
2.5
1
2.4
3
6
2
4.0
1.5
3.5
5
8
3
5.5
2
4.6
7.5
12
5
8
3
6.8
10
16
7.5
12
5
9.2
15
24
10
15
7.5
14
20
30
15
22
10
17
25
38
20
28
10
22
30
45
25
35
15
26
40
61
30
41
20
36
Model Number
LSLV0008H100-4COFN(PLUS_NEW) LSLV0015H100-4COFN(PLUS_NEW) LSLV0022H100-4COFN(PLUS_NEW) LSLV0037H100-4COFN(PLUS_NEW) LSLV0055H100-4COFN(PLUS_NEW) LSLV0075H100-4COFN(PLUS_NEW) LSLV0110H100-4COFN(PLUS_NEW) LSLV0150H100-4COFN(PLUS_NEW) LSLV0185H100-4COFN(PLUS_NEW) LSLV0220H100-4COFN(PLUS_NEW) LSLV0300H100-4COFN(PLUS_NEW)
50
75
40
55
25
39
LSLV0370H100-4COFD(PLUS_NEW)
60
91
50
67
30
47
LSLV0450H100-4COFD(PLUS_NEW)
75
107
60
81
40
55
100
142
75
106
50
73
125
169
100
136
60
86
150
223
125
169
60
93
200
264
150
195
75
101
250
325
200
255
100
137
300
370
250
303
125
137
350
432
250
345
150
181
400
481
300
375
150
218
500
613
400
478
150
232
550
683
450
541
200
245
650
770
500
591
250
280
800
962
650
740
350
361
LSLV0550H100-4COFD(PLUS_NEW)
LSLV0750H100-4COFD(PLUS_NEW) LSLV0900H100-4COFD(PLUS_NEW) LSLV1100H100-4COFD(PLUS_NEW) LSLV1320H100-4COFD(PLUS_NEW) LSLV1600H100-4COFD(PLUS_NEW) LSLV1850H100-4COFD(PLUS_NEW) LSLV2200H100-4COFD(PLUS_NEW) LSLV2500H100-4COFD(PLUS_NEW) LSLV3150H100-4COFD(PLUS_NEW) LSLV3550H100-4COFD(PLUS_NEW) LSLV4000H100-4COFD(PLUS_NEW) LSLV5000H100-4COFD(PLUS_NEW)
26
Order Code
Dimensions(in) W X H X D
Approx. Weight (lbs.)
67300001PL 67300002PL 67300003PL 67300004PL 67300005PL 67300006PL 67300007PL 67300008PL 67300009PL 67360010PL 67360011PL 67360012PL 67360013PL 67360014PL 67360015PL 67360016PL 67360017PL 67360018PL
6.3 X 9.1 X 7.1
7.1 X 11.4 X 8.1 8.7 X 13.8 X 8.8 10.8 X 17.7 X 11.2 12.8 X 20.1 X 11.2 12.8 X 21.7 X 12.2 11.8 X 27.8 X 15.2 15.0 X 27.8 X 15.6
7.3
10.1 15.6 55.8
72.5 86.4 90.6 118.2 121.9 159.2
Order Code
Dimensions(in) W X H X D
Approx. Weight (lbs.)
67310025PL 67310026PL 67310027PL 67310028PL 67310029PL 67310030PL 67310031PL 67310032PL 67310033PL 67310034PL 67310035PL 67310012PL 67310036PL 67310013PL 67310037PL 67310014PL 67310038PL 67310015PL 67310016PL 67310041PL 67310042PL 67310043PL 67310044PL 67310045PL 67310046PL 67310047PL 67310048PL 67310049PL 67310050PL
6.3 X 9.1 X 7.1
7.1 X 11.4 X 8.1 8.7 X 13.8 X 8.8 10.8 x 17.7 x 11.2
12.8 x 20.1 x 11.2
12.8 x 21.7 x 12.2 11.8 x 27.8 x 15.2 15.0 x 27.8 x 15.6 17.3 x 36.3 x 17.3 23.6 x 39.4 x 19.7 30.6 x 41.5 x 19.7
7.3
7.5 10.1 10.6 16.5 57.3
77.2
94.8 123 164.7 264.6
409.0 584.2
Energy Saving LV Drive
Conduit
Flange Mount
Connection Box Kit Heat Sink Out
NEMA1 Enclosure
the Back
Order Code
Order Code
Keypad
Additional Data Reactor
Filter
64160002
64150016
64160003 64160004 64150010
64150011
64150012
64160020 64160021
64150017 64150018 64150019
64150020
64150021
64160015 64160016
Built-in LCD
keypad
NO
NO
NO Built-in
NO
YES Built-in EMC filter
Disconnect Switch Option
Model Number
MMS-32H,8A & HANDLE,MEH32R,115,UL MMS-32H,13A & HANDLE,MEH32R,115,UL MMS-32H,17A & HANDLE,MEH32R,115,UL MMS-32H,22A & HANDLE,MEH32R,115,UL MMS-32H,32A & HANDLE,MEH32R,115,UL MMS-32H,40A & HANDLE,MEH32R,115,UL MMS-63H,50A & HANDLE,MEH63,115,UL MMS-100H,75A & HANDLE,MEH100,115,UL MMS-100H,90A & HANDLE,MEH100,115,UL
Order Code
64160028 64160029 64160030 64160031 64160032 64160033 64160034 64160035 64160036
Conduit
Flange Mount
Connection Box Kit Heat Sink Out
NEMA1 Enclosure
the Back
Order Code
Order Code
Keypad
64160002
64150016
64160003 64160004 64150010
64150011
64150012 64160020 64160021 64160022 64160023 64160024
64150017 64150018 64150019
64150020
64150021 64160015 64160016 64160017 64160018 64160019
Built-in LCD
keypad
Additional Data
Disconnect Switch Option
Reactor NO
Built-in DC
Reactor
Filter
Built-in EMC Filter
NO
Model Number
UTS150LT FTU 40A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 40A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 40A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 40A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 40A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 40A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 40A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 40A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 50A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 60A 3P & HANDLE,REH2-S-12,UTS250 UTS150LT FTU 80A 3P & HANDLE,REH2-S-12,UTS250
UTS150LT FTU 100A 3P & HANDLE,REH2-S-12,UTS250
Order Code
64160037 64160038 64160039 64160040 64160041 64160042 64160043 64160044 64160045 64160046 64160047
64160048
UTS150LT ATU 125A 3P & HANDLE,REH2-S-12,UTS250 64160049
UTS150LT ATU 150A 3P & HANDLE,REH2-S-12,UTS250
UTS250LT FTU 175A 3P & HANDLE,REH2-S-12,UTS250 UTS250LT FTU 225A 3P & HANDLE,REH2-S-12,UTS250
64160050
64160051 64160052
Built-in EMC Filter
NONE
27
H100+ Fan & Pump Drive
Three Phase 525 ~ 600 VAC (-15% ~ +10% )
UL Three Phase Ratings
Normal Duty(VT)110% for 60 seconds
Heavy Duty(VT)120% for 60 seconds
HP
Output Current (Amps)
HP
7.5
9
5
10
12
7.5
15
17
10
20
23
15
25
27
20
30
34
25
40
43
30
50
55
40
60
64
50
75
80
60
100
104
75
125
128
100
Output Current
6.6 9 12 17 23 27 34 43 55 64 80 104
Model Number
Order Code
Dimensions(in) W X H X D
LSLV0055H100-5CEND(PLUS) LSLV0075H100-5CEND(PLUS) LSLV0110H100-5CEND(PLUS) LSLV0150H100-5CEND(PLUS) LSLV0185H100-5CEND(PLUS) LSLV0220H100-5CEND(PLUS) LSLV0300H100-5CEND(PLUS) LSLV0370H100-5COND(PLUS) LSLV0450H100-5COND(PLUS) LSLV0550H100-5COND(PLUS) LSLV0750H100-5COND(PLUS) LSLV0900H100-5COND(PLUS)
67320005PL 67320006PL 67320007PL 67320008PL 67320009PL 67320010PL 67320011PL 67320012PL 67320013PL 67320014PL 67320015PL 67320016PL
7.1X18.9X8.1
8.7X21.7X8.8 10.8X17.7X11.2 12.8X20.1X11.2 12.8X21.7X12.2
Approx. Weight (lbs.)
20.9 21.2 21.9 22.1 22.4 31.5 32.3 55.1 74.1 74.3 96.1 96.4
Remote Cable with Keypad
Length 6.6 ft 9.8 ft
Model Number REMOTE 2M (LSLV-H100) REMOTE 3M (LSLV-H100)
Order Code 64110009PL 64110010PL
Option
LCD Keypad USB-RJ45 Cable
Extension I/O Lonwork
Ethernet IP & Modbus TCP BACnet IP, Ethernet IP & Modbus TCP
Model Number OPTION (H100+ LCD LOADER), LCEN-H100PLUS
USB-RJ45 Cable for LSLV-H100 Extension I/O for LSLV-H100 LonWorks for LSLV-H100
Ethernet IP & Modbus TCP for H100+ Series Ethernet IP & Modbus TCP for H100+ Series
Order Code 64160057PL
46310162 64160005 64160001 64160056 64160058
28
Energy Saving LV Drive
Conduit Connection Box NEMA1 Enclosure
Order Code
Flange Mount Kit Heat Sink Out
the Back
Order Code
Comes with conduit box as a standard
Not applicable
64150010 64150011 64150012
64150019 64150020 64150021
Keypad
Built-in LCD
keypad
Additional Data Reactor
Built into conduit option
Yes
Filter Yes No
Disconnect Switch Option
OrderCode
None
Wiring
.VMUJGVODUJPO*OQVU "OBMPH4FUUJOH
P1 P2 P3 P4
1/1 /1/ P5
P6 P7 CM
VR
V1
CM
7 5
I2 * 7
"0 *5FSNJOBM 7
$.
5TFOTPS
'SFRVFODZ4FUUJOH 1VMTF5SBJO
TI
The default value is displayed in blue color
5FSNJOBUJOH 3FTJTUBODF
S-
S+
0/ 0'' SG
AO1 70 *0
AO2
344JHOBM*OQVU
"OBMPH7PMUBHF $VSSFOU0VUQVU "OBMPH7PMUBHF0VUQVU
&YUFSOBM71PXFS
.VMUJGVODUJPO$PNNPO EG
C1
A1
'BVMU4JHOBM0VUQVU
B1
A2
C2
3FMBZ0VUQVU
A3
C3
3FMBZ0VUQVU
A4
C4
3FMBZ0VUQVU
A5
C5
3FMBZ0VUQVU
29
iS7
High Performance Drive
IP20 · 3Ø 230V:1.0HP~100HP · 3Ø 460V:1.0HP~600HP
IP54 · 3Ø 230V 1.0HP~30HP · 3Ø 460V 1.0HP~30HP
iS7, a High-performance and High-reliability Drive
iS7 is a high-performing standard drive that is applicable to any working environment.
.
)
J7
J$
J(" 4
Powerful Sensorless Vector Control
. SteecnhsnooJrl7leosgsievsetchtoart dalegmoroitJnh$smtrastdeepvoewloeprefudlwcoitnhtJro(oulroaf"clocuwm-supleaetedd4
torque and spe"eVdUPa5VcOcJuOHracy arebuilt-in.
'JFMEOFUXPSL
. J7
J$
J(" 4
Features
*1 J1/&.""
Various functionsare supported"ViUnPc5lVuOdJOiHngV/F control, V/FPG,
'JFMEOFUXPSL
slip compensation, KEB, Easy Start, auto tuning at pause and
J& Flying SJt1art"
J4 "VUP5VOJOH
*1 J1/&."" 'JFMEOFUXPSL
)
ApplJi&cations
6-
J1"
J4
*1
· Extruders
· Construction lift · Press
·Laminating machine · Crane/H
oist
· Washer/Dehydrator
)
· ·
DTirraewliJinn&egmachine
J··1PWairnkd"inerg equipment J4·· CLooamdpSrhesasroinrg 6-
·Elevator
· Conveyo
r
6-
J1/&.""
Product Type & Model
ISO9001 ISO14001
SV 0008 iS7 - 2 N O F D
LS Drive Starvert Series
Motor Capacity 0008: 0.75kW ~3750: 375kW Series Name
Input Voltage 2: 3Ø 200~230V / 4: 3Ø 380~480V
Keypad 7"$ 1SFTT5ZQFN
: Non-Keypad / G: Graphic Keypad
L86- UL Standard O: Open / E: Enclosed UL Type 1 / P: Enclosed UL Type 12
Filter ISO9001 ISO14001 Blank: Non-Filter / F: Built-in EMC Filter
DC Reactor Blank: Non-DC Reactor / D: Built-in DC Reactor/ R: DB Resistor (Inner mounted)
30
Energy Saving LV Drive
Main Features
Features
Description
Benefits
Powerful Control Performance Safety Card
Various Field Networks EMC Filter DC Reactor Application-customized Functions
Sensor-less vector control, sensored control, and auto tuning
2-channel STO (Safety Torque Off) For smaller iS7s (200HP and less), you must order from the factory with the safety option. The safety card can be field installed on iS7s (250HP and up).
Profibus-DP, Ethernet IP, Modbus TCP, CANopen, PROFINET, CC link, RAPIEnet, LonWorks, R-Net/F-Net communication network options
200V/400V 0.75~22kW capacity EMC filter built-in product options
Capacity with built-in reactors 200V 0.75~22kW 400V 0.75~220kW
Web function (wire-drawing machine) S/W option; position and synchronization control option; and classification option
Improved accuracy in speed and torque control
Satisfies the safety standards with complete safety function provided
Possible to handle various field networks; convenient maintenance of options board; and easier mounting Reduced electromagnetic noise; and additional space and expenses for parts unnecessary Improved power factor, and THD reduction
Flexibility for application used in various industrial sectors
Control
Control Mode Frequency Setting Resolution
Frequency Level
V/F Pattern Overload Tolerance Torque Boost
V/F, V/F PG, Slip compensation, Sensorless, Vector control Digital command: 0.01Hz / Analog command: 0.06Hz (peak frequency: 60Hz) Digital command operation: 0.01% of the peak output frequency / Analog command operation: 0.1% of the peak output frequency Linear, square torque reduction, user V/F CT (Heavy Duty) current rating: 150% 1min / VT (Normal Duty) current rating: 110% 1min Passive torque boost; auto torque boost
Operation
Operation Mode
Keypad / Terminal Block / Communication Network options
Frequency Setting
Analog method: 0 ~ 10 (V), -10 ~ 10 (V), 0 ~ 20 (mA) Digital method: Keypad
Operation Function
PID control; up-down operation; 3-wire operation; DC braking; frequency limit; frequency jump; secondary function; slip compensation; reverse rotation prevention; auto restart; power switching; auto tuning; speed search (Flying Start); energy buffering operation; Power Braking; Flux Braking; leakage-reduced operation; MMC; Easy Start
NPN (Sink) / PNP (Source) Options
Input
Multifunctional Terminal (8 inputs) P1 ~ P8 Note 1)
Function: Forward operation; backward operation; reset; external trip; emergency trip; jog operation; switching frequency high, middle, low; acceleration and deceleration by stage high, middle, low; DC braking at pause; second motor option; frequency increase; frequency decline; 3-wire operation; switching to the general operation during PID operation; switching to body operation during option operation; analog command fixed frequency; acceleration or deceleration stop
Multifunctional Open Collector Terminal
Output Multifunctional Relay Terminal
Fault output and drive operation mode output
DC 26V 100mA or below (N.O., N.C.) AC 250V 1A or below, DC 30V 1A or below
Analog Output
0 ~ 10 Vdc (20mA or below): Frequency, current, voltage, DC voltage options
Note 1) According to the parameter setting of IN-65~72, various functions related to multifunctional terminal can be set.
31
iS7
High Performance Drive (NEMA 1*)
* Requires NEMA 1 option kit
Three Phase 200 ~ 240 VAC (-15% ~ +10%)
UL Three Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Normal Duty(VT)120% for 60 seconds
Heavy Duty(CT) Single Phase Input
Output
Output
HP
Current
HP
Current
HP
(Amps)
(Amps)
1
5.0
2
8.0
0.5
2
8.0
3
12.0
0.75
3
12.0
5
16.0
1.5
5
16.0
7.5
24.0
2
7.5
24.0
10
32.0
3
10
32.0
15
46.0
5
15
46.0
20
60.0
7.5
20
60.0
25
74.0
10
25
74.0
30
88.0
10
30
88.0
40
124.0
15
40
116.0
50
146.0
20
50
146.0
60
180.0
25
60
180.0
75
220.0
30
75
220.0
100
288.0
40
100
288.0
125
345.0
50
Amps
4.3 6.9 11.2 14.9 22.1 28.6 44.3 55.9 70.8 85.3 121 154 191 233 305
UL Single Phase Ratings
Heavy Duty(CT) 3 Phase Output
Normal Duty(VT) Single Phase Input
Amps
HP
Amps
2.6
0.75
6.8
4.0
1
10.6
6.2
2
14.9
8.1
3
21.3
12.0
5
28.6
16.0
7.5
41.2
24.0
10
54.7
31.0
10
69.7
38.0
15
82.9
45.0
20
116.1
60.0
25
152.0
75.0
30
190.0
93.0
40
231.0
114.0
50
302.0
149.0
60
362.0
Normal Duty(VT) 3 Phase Output
Model Number
Amps
4.1 6.0 8.2 12.0 16.0 23.0 31.0 38.0 45.0 64.0 75.0 93.0 114.0 149.0 178.0
SV0008IS7-2NOFD SV0015IS7-2NOFD SV0022IS7-2NOFD SV0037IS7-2NOFD SV0055IS7-2NOFD SV0075IS7-2NOFD SV0110IS7-2NOFD SV0150IS7-2NOFD SV0185IS7-2NOFD SV0220IS7-2NOFD
SV0300IS7-2SO SV0370IS7-2SO SV0450IS7-2SO SV0550IS7-2SO SV0750IS7-2SO
Three Phase 380 ~ 480 VAC (-15% ~ +10%)
UL Three Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Normal Duty(VT)120% for 60 seconds
Heavy Duty(CT) Single Phase Input
Output
Output
HP
Current
HP
Current
HP
(Amps)
(Amps)
1
2.5
2
4.0
0.5
2
4.0
3
6.0
0.75
3
6.0
5
8.0
1
5
8.0
7.5
12.0
2
7.5
12.0
10
16.0
3
10
16.0
15
24.0
5
15
24.0
20
30.0
7.5
20
30.0
25
39.0
10
25
39.0
30
45.0
10
30
45.0
40
61.0
15
40
61.0
50
75.0
20
50
75.0
60
91.0
25
60
91.0
75
110.0
30
75
110.0
100
152.0
40
100
152.0
125
183.0
50
125
183.0
150
223.0
60
150
223.0
200
264.0
75
200
264.0
250
325.0
100
250
325.0
300
370.0
125
300
370.0
350
432.0
-
350
432.0
400
547.0
-
400
547.0
500
613.0
-
500
613.0
600
731.0
-
600
731.0
700
877.0
-
Amps
2.2 3.6 5.5 7.5 11 14.4 22 26.6 35.6 41.6 55.5 67.9 82.4 102.6 143.4 174.7 213.5 255.6 316.3
-
UL Single Phase Ratings
Heavy Duty(CT) 3 Phase Output
Normal Duty(VT) Single Phase Input
Amps
HP
Amps
1.4
0.75
3.7
2.1
1
5.7
2.8
2
7.7
4.1
3
11.1
6.1
5
14.7
8.1
5
21.9
12.0
7.5
26.4
16.0
10
35.5
20.0
15
41.1
23.0
20
55.7
32.0
25
67.5
39.0
30
81.7
47.0
40
101.8
57.0
50
143.6
78.0
60
173.4
95.0
75
212.9
116.0
100
254.2
134.0
125
315.3
166.0
150
359.3
-
-
-
-
-
-
-
-
-
-
-
-
-
-
-
Normal Duty(VT) 3 Phase Output
Model Number
Amps
2.2 3.2 4.1 6.1 8.1 12.0 16.0 20.0 23.0 31.0 39.0 47.0 57.0 78.0 94.0 116.0 138.0 165.0 189.0
-
SV0008IS7-4NOFD SV0015IS7-4NOFD SV0022IS7-4NOFD SV0037IS7-4NOFD SV0055IS7-4NOFD SV0075IS7-4NOFD SV0110IS7-4NOFD SV0150IS7-4NOFD SV0185IS7-4NOFD SV0220IS7-4NOFD SV0300IS7-4NOD SV0370IS7-4NOD SV0450IS7-4NOD SV0550IS7-4NOD SV0750IS7-4NOD SV0900IS7-4SOD SV1100IS7-4SOD SV1320IS7-4SOD SV1600IS7-4SOD SV1850IS7-4SOD SV2200IS7-4SOD
SV2800IS7-4SO SV3150IS7-4SO SV3750IS7-4SO
32
Energy Saving LV Drive
Order Code
6120000100 6120000200 6120000300 6120000400 6120000500 6120000600 6120000700 6120000800 6120000900 6120001000 6120005200 6120005300 6120005400 6120005500 6120005600
Dimensions(in) H x W x D
Approx. Weight (lbs.)
Conduit
Flange Mount
Connection Box Kit Heat Sink Out
NEMA1 Enclosure
the Back
Order Code
Order Code
5.9 X 11.2 X 7.9
12.1
64110016
64110027
7.9 X 14.0 X 8.9 9.8 X 15.2 X 11.2 11 X 18.2 X 11.7 11.8 X 22.4 X 10.4 14.6 X 24.8 X 11.1 18.3 X 29.5 X 14.0
22.0 44.1 66.1 65.0 97.0 159.8
64110017 64110018 64110019 64110040 64110041 64110042
64110029 64110030 64110031
Not Available
Keypad
NO
Built-in LCD
Keypad
Additional Data
Reactor
Filter
Built-in DC Reactor
Built-in EMC Filter
NO
NO
Order Code
6121000100 6121000200 6121000300 6121000400 6121000500 6121000600 6121000700 6121000800 6121000900 6121001000 6121001100 6121001200 6121001300 6121001400 6121001500 6121005100 6121005200 6121005300 6121005400 6121014900 6121015000 6121015100 6121015200 6121015300
Dimensions(in) H x W x D
Approx. Weight (lbs.)
Conduit
Flange Mount
Connection Box Kit Heat Sink Out
NEMA1 Enclosure
the Back
Order Code
Order Code
5.9 X 11.2 X 7.9
12.1
64110016
64110027
7.9 X 14.0 X 8.9 9.8 X 15.2 X 11.2 11 X 18.2 X 11.7
11.8 X 23.4 X 11.9
14.6 X 26.1 X 14.7 20.1 X 30.9 X 16.7 20.1 X 33.9 X 16.7 27.2 X 42.4 X 17.7 30.4 X 44.8 X 17.3 36.3 X 51.3 X 19.5
22.0 44.1 66.1
90.4
138.9 222.7 251.3 440.9 555.6 776.0
64110017 64110018 64110019 64110020 64110021
64110029 64110030 64110032 64110033 64110034
6411006463
64110053
6411006563 6411006663 6411006763
64110054 Not Available
Keypad
NO
Built-in LCD
Keypad
Additional Data
Reactor
Filter
Built-in EMC Filter
Built-in DC Reactor
NO NO
33
iS7
High Performance Drive (NEMA 12)
Three Phase 200 ~ 240 VAC (-15% ~ +10%)
UL Three Phase Ratings
UL Single Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Output
HP
Current
(Amps)
1
5.0
2
8.0
3
12.0
5
16.0
7.5
24.0
10
32.0
15
46.0
20
60.0
25
74.0
30
88.0
Heavy Duty(CT) Single Phase Input
HP
Amps
0.5
4.3
0.75
6.9
1.5
11.2
2
14.9
3
22.1
5
28.6
7.5
44.3
10
55.9
10
70.8
15
85.3
Heavy Duty(CT) 3 Phase Output
Amps
2.6 4.0 6.2 8.1 12.0 16.0 24.0 31.0 38.0 45.0
Normal Duty(VT) Single Phase Input
HP
Amps
0.75
6.8
1
10.6
2
14.9
3
21.3
5
28.6
7.5
41.2
10
54.7
10
69.7
15
82.9
20
116.1
Three Phase 380 ~ 480 VAC (-15% ~ +10%)
UL Three Phase Ratings
UL Single Phase Ratings
Heavy Duty(CT)150% for 60 seconds
Output
HP
Current
(Amps)
1
2.5
2
4.0
3
6.0
5
8.0
7.5
12.0
10
16.0
15
24.0
20
30.0
25
39.0
30
45.0
Heavy Duty(CT) Single Phase Input
HP
Amps
0.5
2.2
0.75
3.6
1
5.5
2
7.5
3
11
5
14.4
7.5
22
10
26.6
10
35.6
15
41.6
Heavy Duty(CT) 3 Phase Output
Amps
1.4 2.1 2.8 4.1 6.1 8.1 12.0 16.0 20.0 23.0
Normal Duty(VT) Single Phase Input
HP
Amps
0.75
3.7
1
5.7
1.5
7.7
3
11.1
3
14.7
5
21.9
7.5
26.4
10
35.5
10
41.1
15
55.7
Normal Duty(VT) 3 Phase Output
Model Number
Amps
4.1 6.0 8.2 12.0 16.0 23.0 31.0 38.0 45.0 64.0
SV0008IS7-2SP SV0015IS7-2SP SV0022IS7-2SP SV0037IS7-2SP SV0055IS7-2SP SV0075IS7-2SP SV0110IS7-2SP SV0150IS7-2SP SV0185IS7-2SP SV0220IS7-2SP
Normal Duty(VT) 3 Phase Output
Amps
2.2 3.2 4.1 6.1 8.1 12.0 16.0 20.0 23.0 31.0
Model Number
SV0008IS7-4SP SV0015IS7-4SP SV0022IS7-4SP SV0037IS7-4SP SV0055IS7-4SP SV0075IS7-4SP SV0110IS7-4SP SV0150IS7-4SP SV0185IS7-4SP SV0220IS7-4SP
34
Energy Saving LV Drive
Order Code
Dimensions(in) H x W x D
Approx. Weight (lbs.)
Frame Size
6120004100
6120004200
8.0 X 16.5 X 8.2
14.8
6120004300
6120004400
6120004500
20.9
10.0 X 18.1 X 9.1
6120004600
21.2
6120004700
43.2
12.3 X 23.3 X 11.6
6120004800
43.9
6120004900
65.9
13.5 X 22.5 X 12.4
6120005000
59.7
1 (NEMA12)
2 (NEMA12) 3 (NEMA12) 4 (NEMA12)
Additional Data
Keypad
Reactor
Built-in
7 segment
NO
LED keypad
Filter NO
Order Code
Dimensions(in) H x W x D
Approx. Weight (lbs.)
Frame Size
6121007100
6121007200
8.0 X 16.5 X 8.2
14.8
6121007300
6121007400
6121007500
20.9
10.0 X 18.1 X 9.1
6121007600
21.2
6121007700
43.2
12.3 X 23.3 X 11.6
6121007800
43.9
6121007900
65.9
13.5 X 22.5 X 12.4
6121008000
59.7
1 (NEMA12)
2 (NEMA12) 3 (NEMA12) 4 (NEMA12)
Additional Data
Keypad
Reactor
Built-in
7 segment
NO
LED keypad
Filter NO
35
iS7
High Performance Drive
Remote Cable with Keypad
Length 6.6 ft 9.8 ft
Model Number REMOTE 2M (SV-iS7) REMOTE 3M (SV -iS7)
Option
LCD Keypad RS232C-RJ45 Cable
Isolation I/O Extension I/O
Encoder CC-Link Ethernet I/P dual port Profibus-DP
PLC RNET Devicenet Lonworks CANopen Profinet
Model Number LCD Keypad for SV-iS7 RS232C-RJ45 Cable for SV OPTION ISOLATION I/O,SV-iS7 OPTION EXTENSION I/O,SV-iS7 ENCODER OPTION,SV-iS7 OPTION CC-Link,SV-iS7 OPTION RAPIENET+,SV-IS7,(CI-S7M2),HKMC OPTION PROFIBUS-DP,SV-iS7
OPTION PLC,SV-iS7 OPTION RNET/FNET(CR-S7M1),SV-iS7
OPTION DEVICENET,SV-iS7 OPTION LONWORKS,SV-iS7
OPTION CANopen,SV-iS7 OPTION PROFINET,SV-iS7,(CJ-S7M1)
Order Code 64110009 64110010
Order Code 64110038
76676236322 64110003 64110004 64110002 64110023
64110068HD 64110005 64110006 64110007 64110013 64110014 64110012 64110052
36
Energy Saving LV Drive
Wiring
1)
Braking resistor (Option)
3Ø AC Input 50/60Hz
MCCB
MC
P(+)
B
N(-)
R(L1)
U
S(L2)
V
T(L3)
W
G
P1 (FX)
P2 (RX)
P3 (BX)
Multi-function input (Default value)
P4 (RST) P5 (Sp-L) Sink / Source P6 (Sp-M)
P7 (Sp-H)
P8 (Jog)
Common terminal 0~10V Input
CM
VR+
Analog power source (+12V, 100mA)
VR- Analog power source (-12V, 100mA)
V1 Frequency reference (0~10V or -10~10V)
I1 Frequency reference (0~20mA)
5G (CM) Common terminal 2)
Volume : 1~5[kohm] Above 1/2W
S+ S- RS-485 CM
-10~10V Input
"" Main power circuit "" Control circuit
AO1 Analog output 1(0~10V) AO2 Analog output 1(0~20mA) 5G(CM) Common terminal 2) 24 External 24V Power
(Max 150mA)
A1 C1 Relay output 1
(Normal open) B1
A2 Relay output 2 C2 (Normal open)
Q1 Open collector output
EG
Safety Wiring 3)
*1) Braking resistor(option)
P(+)
B
N(-)
0.75 ~ 22kW
DB Unit (Option)
P(+)
P2(+)
N(-)
30 ~ 75kW
*2) For 0.75~22kW, please connect to 5G. For 30~375kW, please connect to CM.
*3) For 0.75~160kW, the safety option cannot be installed in the field. A type "T" safety iS7 must be specified and ordered from the factory. For 185~375kW, a safety option can be purchased separately and field installed on the standard iS7.
37
SP100 Bypass Package Solution
W
NEW
· 3Ø 230V:7.5HP~40HP · 3Ø 460V:7.5HP~75HP
ISO9001 ISO14001
38
New SP100, VFD Packaged Solution for Variable Torque Fan and Pump Applications
HVAC applications are optimized with the H100+ Bypass. The
bypass series offers security with no downtime and energy
. savingsJ7using the H100J+$VFD. The New SJP(100"proviede4s new
various features with H100+.
Features
· 3 Contactor Bypass
"VUP5VOJOH
· Easy Maintenance
'JFMEOFUXPSL
· HAND/OFF/AUTO selectable
· Built in Bacnet MS/TP, Metasys
.·CompJ7act SizeBuilt-in J$ and MoJd(bus "Protocols 4 *1 J1/&.""
AC/DC Reactor (Option)
· NEMA 1 Enclosure
·Easy Wiring andInstallation · KEB, Kinetic EnergyBuffering
) · Built-Ji&n Operation IndicJa1tor " · Fire ModJe4
· Auto Bypass Function
· Built-in Five Relay Outputs
·Motor OL TripDetection
"VUP5V·ORJOeHalTime Clock
'JFMEOFUXPSL
6-
Applications
· All HVAC Applications
*1 J1/&.""
) ProduJ&ctType & MJo1de"l
J4
LSLV - #### - SP100 -
# C E X X 3 6-
Product
Type Prefix
Horsepower Rating 0055 = 5.5kW(2-7.5HP) 0220 = 22kW(30HP)
0075 = 7.5kW(10HP) 0300 = 30kW(40HP) 0110 = 11kW(15HP) 0370 = 37kW(50HP) 0150 = 15kW(20HP) 0450 = 45kW(60HP) 0185 = 18.5kW(25HP) 0550 = 55kW(75HP)
Series Name
Input Voltage 2 = 208VAC / 230VAC, 3-Phase, 60Hz 4 = 460VAC, 3-Phase, 60Hz
LCD Keypad
Enclosure 7"$UL1TSyFpTeT15ZQF
L8EM6C-Filter F = Built-in EMC Filter (C3 type filter / Only available for 460V, 2~40hp)
N = No EMC Filter
Reactor Type ISO900D1 =ISDOC1L4in0k01Reactor (Provided as Standard) / Model for the Quick Ship Program
A = 3% Impedance AC Line Reactor
Configuration 3 = 3 contactor Basic Bypass
Energy Saving LV Drive
Environmental
Enclosure Ambient Temperature Storage Temperature Humidity Altitude
Type 1 +14 to +104 (-10 to +40) -4 to +149 (-20 to +65) 5% to 95% with no condensation 0 to 3,300 ft. (1,000m) without derating, derate output current by 1% for each additional 330 ft (100m)
Codes and Standards
UL, cUL Listed per UL508A Conforms to applicable NEMA ICS, NFPA, & IEC Standards
Electrical
Input Voltage: Nominal - Phase Input Voltage: Tolerance, Unbalance Input Frequency Displacement Power Factor Output Frequency Motor Control Method
PWM Switch Frequency
Drive Overload Capacity Motor Overload Torque Boost
208VAC, 230VAC, 460VAC - 3 Phase +/-10%, 3% 60Hz +/-5% 0.97 0.00 ~ 400.00Hz V/F, Slip compensation 1 ~ 15kHz (2~ 40HP) 1 ~ 10kHz (50 ~ 75HP) 120% for 1 min - 208V/230V: 2~25HP, 460V: 2~75HP Programmable overload / EMPR Manual 0~15% boost, automatic torque boost available
Speed Reference
Keypad, 0~10V, -10~10V, 0~20mA, RS485, Fieldbus, Pulse - 208V/230V: 2~25HP, 460V: 2~75HP
Speed Reference Resolution Acceleration/Deceleration Time Jump Frequencies
Output Signals
Digital command: 0.01Hz Analog command: 0.06Hz (60Hz standard)
0.00 ~ 6000.0 seconds
3 programmable jump frequency
Qty 4: N.O. dry contacts rated 5A @ 230V max, functionality: Drive Run, Drive Fault, Bypass Run, & Damper Control
Qty 1: Open Collector rated 50mA @ 26VDC max, functionality: Drive Run Qty 1: Form C dry contacts rated 2A @ 230V max, functionality: Drive Fault Qty 1: 0 to 10VDC or 4 to 20mA, user selectable programmable analog signal
39
SP100 Bypass Package Solution
Main Features
Soft Fill Start/End Ramp
Decel Valve Ramp Scheduling (Time Event: Real Time Clock) Flow Compensation Pump Clean Load Tuning
Fire Mode
Energy Savings Display Power-On Resume Sleep, Sleep Boost, Wake-up Auto Torque Boost Lubrication Control Damper Control Level Detection Pipe Break Detection Underload Detection Motor Pre-heat Kinetic Energy Buffering Macro Setting
Bypass Features
Prevents pump damage caused by dramatic pressure changes during initial operation. Prevents pump damage by changing the acceleration and deceleration ramp profile during initial pump operation and stop.
Prevents pump or pipe damage caused by sudden pressure changes when pumps are stopped or valves are closed. Real Time Clock allows sequencing of selected functions during pre-defined time periods. Compensates for hydraulic losses due to elevation or long pipe lengths. Removes foreign substances from the pump cavity to extend life and improve efficiency. Estabilishes load curves (current & power) to define load characteristics for under torque and pump clean funtions.
Operates continuously to protect critical systems during emergency situations under set frequency and direction.
Commercial energy consumption is compared to the energy utilized by the VFD to calculate the amount energy savings.
Automatic restart upon power interruption. Standby mode during PID operation for energy savings and reduction of pump wear. Manual or automatic voltage compensation for varying load profiles. Lubrication output signal for a defined time period prior to drive control starting. Damper control with end-switch confirmation with programmable time period. User defined low and high detection limits based upon voltage, current or feedback. Upon PID operation, pipe breakage or leakage is detected to display a warning or fault condition. No flow or pump dry detection with selectable response. Prevents condensation in the motor by injecting direct current during idle states. Upon loss or momentary power interruption, the drive maintains DC bus voltage by controlled regeneration of the load. Application specific parameter groups for commonly used functions. Manual bypass selection. Automatic transfer to bypass. Bypass run indication. Motor overload indication. Power on indication. Hand/Off/Auto selector switch. VFD/Off/Bypass selector switch. Adjustable trip class for bypass contactor. Damper end switch logic with notification. Drive and bypass input/output contactors. Drive input isolation contactor. Control power transformer with fusing. Five built-in relay outputs. Built-in DC reactor. / Built-in 3% AC Line reactor as an option.
Three Phase 200 ~ 240 VAC (-15% ~ +10% )
Normal Duty(VT)120% Heavy Duty(CT)150%
for 60 seconds
for 60 seconds
Output
Output
HP Current HP Current
(Amps)
(Amps)
7.5 22.0
5
17.0
10 30.0 7.5 24.0
15 42.0 10 32.0 20 56.0 15 46.0
25 69.0 20 60.0
30 82.0 25 68.0
40 110.0 30 81.0
Model Number
LSLV0055SP100-2CEND(EXPORT) LSLV0075SP100-2CEND(EXPORT) LSLV0110SP100-2CEND(EXPORT) LSLV0150SP100-2CEND(EXPORT) LSLV0185SP100-2CEND(EXPORT) LSLV0220SP100-2CEND(EXPORT) LSLV0300SP100-2CEND(EXPORT)
Order Code
Dimensions(in) W x H x D
Approx. Weight (lbs.)
6736001900 6736002000 6736002100 6736002200 6736002300 6736002400 6736002500
6.65 X 36.51 X 8.55
8.26 X 46.41 X 10.27 9.83 X 51.65 X 11.33 13.27 X 57.48 X 13.53
37.5
81.6 97 157.2
Additional Data Keypad Reactor Filter
Built-in LED
keypad
Built-in DC
Reactor
NO
40
Energy Saving LV Drive
Three Phase 380 ~ 480 VAC (-15% ~ +10%)
Normal Duty(VT)120% Heavy Duty(CT)150%
for 60 seconds
for 60 seconds
Output
Output
HP Current HP Current
(Amps)
(Amps)
7.5 12.0
5
8.0
10 16.0 7.5 12.0
15 24.0 10 15.0
20 30.0 15 22.0
25 38.0 20 28.0
30 45.0 25 35.0
40 61.0 30 41.0
50 75.0 40 55.0
60 91.0 50 67.0
75 107.0 60 81.0
Model Number
LSLV0055SP100-4CEFD(EXPORT) LSLV0075SP100-4CEFD(EXPORT) LSLV0110SP100-4CEFD(EXPORT) LSLV0150SP100-4CEFD(EXPORT) LSLV0185SP100-4CEFD(EXPORT) LSLV0220SP100-4CEFD(EXPORT) LSLV0300SP100-4CEFD(EXPORT) LSLV0370SP100-4CEND(EXPORT) LSLV0450SP100-4CEND(EXPORT) LSLV0550SP100-4CEND(EXPORT)
Order Code
Dimensions(in) W x H x D
Approx.
Additional Data
Weight
(lbs.) Keypad Reactor Filter
6737003000 6737003100 6.65 X 36.51 X 8.55 6737003200 6737003300 6737003400 8.26 X 46.41 X 10.27 6737003500
9.83 X 51.65 X 11.33 6737003600 6737003700 6737003800 13.27 X 57.48 X 13.53 6737003900
37.5
81.6 97 158.7 180.8
Built-in LED
keypad
Built-in DC
Reactor
Built-in EMC Filter
NO
Wiring Main
41
SP100
Wiring Control Circuit Overview
Bypass Package Solution
42
Energy Saving LV Drive
LS is one of world's most 100 innovators by Clarivate Analytics. With its mission, Futuring Smart Energy, LS pursues the world more smart, safe and sustainable.
Your World Class Total Solution Provider
Amsterdam(Netherland)
Amsterdam(Netherland)
Headquarters & Main manufacturing(Korea)
Headquarters & Wuxi/Dalian/HMuabieni manufacturing(Korea)
DubaWi(UuAxiE/D) alian/Hube(Ci ina) (Cina)
Dubai(UAE)
Tokyo(Japan)
Tokyo(Japan)
Hanoi(Vietnam)
Hanoi(Vietnam)
Chicago(USA) Chicago(USA)
Overseas Subsidiary Office Overseas Branch Office International Presence
Chicago(USA), Dubai(UAE), Amsterdam(Netherland), Wuxi / Dalian / Hubei(China), Tokyo(Japan), Hanoi(Vietnam)
Moscow(Russia), Shanghai / Beijing / Guangzhou / Qingdao / Chengdu / Shenyang / Jinan(China), Tokyo(Japan), Ho Chi Minh(Vietnam), Jakarta(Indonesia), Bangkok(Thailand)
106 Countries
Headquarters Headquarters
R&D Compus R&D Compus
Power Device R&D Center Automaion R&D Center Cheongju factory (Korea) Cheonan factory (Korea) Busan factory (Korea) Power Device R&D Center Automaion R&D Center Cheongju factory (Korea) Cheonan factory (Korea) Busan factory (Korea)
LS R&D Campus LS R&D Campus
PT&T (Testing laboratory) Shanghai R&D Center Wuxi factory (China)
Dalian factory (China) Hanoi factory (Vietnam)
PT&T (Testing laboratory) Shanghai R&D Center Wuxi factory (China)
Dalian factory (China) Hanoi factory (Vietnam)
43
Safety Instructions
For your safety, please read user's manual thoroughly before operating. Contact the nearest authorized service facility for examination, repair, or adjustment. Please contact qualified service technician when you need maintenance. Do not disassemble or repair by yourself! Any maintenance and inspection shall be performed by the personnel having expertise concerned.
According to The WEEE Directive, please do not discard the device with your household waste.
Headquarter LS-ro 127(Hogye-dong) Dongan-gu, Anyang-si, Gyeonggi-Do, 14119, Korea
Seoul Office LS Yongsan Tower, 92, Hangang-daero, Yongsan-gu, Seoul, 04386, Korea Tel: 82-2-2034-4644(Europe), 4982(USA), 4884(East Asia) Fax: 82-2-2034-4588 E-mail: drivesales@ls-electric.com
LS ELECTRIC America Inc. (Chicago, USA) 625 Heathrow Drive, Lincolnshire, IL 60069 USA Tel: 1-800-891-2941 E-mail: sales.us@lselectricamerica.com
Overseas Subsidiaries ·LS ELECTRIC Japan Co., Ltd. (Tokyo, Japan) Tel: 81-3-6268-8241 E-mail: japan@ls-electric.com ·LS ELECTRIC (Dalian) Co., Ltd. (Dalian, China) Tel: 86-411-8730-6495 E-mail: china.dalian@lselectric.com.cn ·LS ELECTRIC (Wuxi) Co., Ltd. (Wuxi, China) Tel: 86-510-6851-6666 E-mail: china.wuxi@lselectric.com.cn ·LS ELECTRIC Middle East FZE (Dubai, U.A.E.) Tel: 971-4-886-5360 E-mail: middleeast@ls-electric.com ·L S ELECTRIC Europe B.V. (Hoofddorp, Netherlands) Tel: 31-20-654-1424 E-mail: europartner@ls-electric.com ·LS ELECTRIC Türkiye Co., Ltd. Tel: 90-212-806-1225 E-mail: Türkiye@ls-electric.com
www.lselectricamerica.com
Overseas Branches
·L S ELECTRIC Tokyo Office (Japan) Tel: 81-3-6268-8241 E-mail: tokyo@ls-electric.com
·LS ELECTRIC Beijing Office (China) Tel: 86-10-5095-1631 E-mail: china.auto@lselectric.com.cn
·LS ELECTRIC Shanghai Office (China) Tel: 86-21-5237-9977 E-mail: china.auto@lselectric.com.cn
·LS ELECTRIC Guangzhou Office (China) Tel: 86-20-3818-2883 E-mail: china.auto@lselectric.com.cn
·LS ELECTRIC Chengdu Office (China) Tel: 86-28-8670-3201 E-mail: china.auto@lselectric.com.cn
·LS ELECTRIC Qingdao Office (China) Tel: 86-532-8501-2065 E-mail: china.auto@lselectric.com.cn
·L S ELECTRIC Nanjing Office (China) Tel: 86-25-8467-0005 E-mail: china.auto@lselectric.com.cn
·L S ELECTRIC Bangkok Office (Thailand) Tel: 66-90-950-9683 E-mail: thailand@ls-electric.com
·LS ELECTRIC Jakarta Office (Indonesia) Tel: 62-21-2933-7614 E-mail: indonesia@ls-electric.com
·LS ELECTRIC Moscow Office (Russia) Tel: 7-499-682-6130 E-mail: info@lselectric-ru.com
·LS ELECTRIC America Western Office (Irvine, USA) Tel: 1-949-333-3140 E-mail: america@ls-electric.com
·LS ELECTRIC Italy office (Italy) Tel: 39-030-8081-833 E-mail: italia@ls-electric.com
2024. 01
2020. 07 LS ELECTRIC Co.,Ltd. All rights reserved. / (03) 2024. 01 Human Power
Adobe InDesign 18.5 (Macintosh) Adobe PDF Library 17.0