Signaling - A117 North American IC Catalog

Sounders, LED, Panel Mount Signaling Alarms, Industrial Horns, Beacons, Signal Lights, Control Tower Lights, Hazardous Location Devices, Loudspeakers, Control Tower, Round Becons, Mini-Square, Stack Lights, A117, A117-CA001A-EN-P, Industrial controls, catalog, A116, A116-CA001A-EN-P

Rockwell Automation

https://www.elit.ee/docs/Automation/ALBR855TBTM Spec

欧洲爱沙尼亚led lighting led照明灯具网站1 - LED询盘邮箱分享 LED盘-LED论坛|中国LED照明外贸论坛

Download link

855XB-BND24A4 Hazloc Beacon, xenon 5J strobe, -4..131°F, PPS glass filled plastic/glass, ss304 mounting bracket, Vitongasket, ½-in. NPT conduit, 24VDC, IP66^NEMA4/4X/13, Allen-Bradley, red  Elit GlobalStore™ - elektritarvikud, automaatika, kontrollerid, IT komponendid

PDF preview unavailable. Download the PDF instead.

ALBR855TBTM Spec
Signaling
Table of Contents

Panel Mount Signaling Alarms

0

· Bulletin 855P Sounders .................................................................................................................. Page 11-3

· Bulletin 855PC Sounders with LED ................................................................................................ Page 11-4

· Bulletin 855PS Strobes .................................................................................................................. Page 11-5

1

· Bulletin 855PB Selectable Steady or Flashing LED ...................................................................... Page 11-6

· Bulletin 855PD Dual Circuit Alarms ................................................................................................ Page 11-7

· Bulletin 855L Panel Light Bars........................................................................................................ Page 11-11

2

Industrial Horns and Beacons

· Bulletin 855H General Purpose Electronic Horns.......................................................................... Page 11-14

· Bulletin 855H High-Performance Electronic Horns ...................................................................... Page 11-16

3

· Bulletin 855H High-Performance Electronic Horns with Attached Strobe Beacons .................. Page 11-17

· Bulletin 855B Mini-Square Beacons .............................................................................................. Page 11-21

· Bulletin 855BS 90 mm Round Beacons ........................................................................................ Page 11-23

4

· Bulletin 855BM 120 mm Round Beacons ...................................................................................... Page 11-23

· Bulletin 855BL 160 mm Round Beacons ...................................................................................... Page 11-23
5
Signal and Control TowerTM Lights

· Bulletin 855D 30 mm Compact Control TowerTM Stack Lights .................................................... Page 11-35

· Bulletin 855F 70 mm Compact Control TowerTM Stack Lights...................................................... Web

6

· Bulletin 855E 50 mm Control TowerTM Stack Lights...................................................................... Page 11-39

· Bulletin 855T 70 mm Control TowerTM Stack Lights ...................................................................... Page 11-45

· Bulletin 855W Wall Mount Signal Lights ........................................................................................ Page 11-61

7

Hazardous Location Devices

· Bulletin 855X Horns, Beacons, and Loudspeakers ...................................................................... Page 11-65

8

9

10

11

 Information for this product line is available on the Industrial Controls Catalog website: www.ab.com/catalogs.
www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

12 13
11-1

Bulletin 855P, 855L
Panel Mount Signaling Alarms and Light Bars
Product Overview

0

Bulletin

855P

855PC

855PS

855PB

855PD

1 Type

Panel Mount Sounder

Panel Mount Sounder with LED

Panel Mount Strobe

Panel Mount LED Beacon

Panel Mount Dual Circuit Alarms

Mounting Hole Size

22.5 or 30.5 mm with hole adapter kit

22.5 or 30.5 mm with hole adapter kit

22.5 or 30.5 mm with hole adapter kit

22.5 or 30.5 mm with hole adapter kit

22.5 or 30.5 mm with hole adapter kit

Environmental Rating

UL Type 4/4X/13, IP65

2 Voltages Available

12...24V AC/DC, 120V AC, 240V AC

12V AC/DC, 24V AC/DC, 12V AC/DC, 24V AC/DC, 12V AC/DC, 24V AC/DC, 12V AC/DC, 24V AC/DC,

120V AC, 240V AC

120V AC, 240V AC

120V AC, 240V AC

120V AC, 240V AC

Illumination Type

--

LED (selectable flashing or continuous)

Strobe

LED (selectable flashing or continuous)

LED (continuous only)

Lens Color Available
3 Operating Temperature

-- -25...+60 °C

Green, red, amber, blue, yellow, clear
-25...+60 °C

Green, red, amber, blue, yellow, clear
-25...+60 °C

Green, red, amber, blue, yellow, clear
-25...+60 °C

Green, red, amber, blue, yellow, clear
-25...+60 °C

Sound Output

80, 100, or 105 dB

98 or 103 dB

--

--

--

4

Sound Type Minimum Sound Level

Continuous, pulsing, or wobble (LE)
<85 dB

Continuous, pulsing, or wobble (LE)
<85 dB

-- --

-- --

-- --

Steady-State Current

20...57 mA

35...73 mA

20...75 mA

10...150 mA

10...150 mA

Diameter

30, 45, 65 mm

45, 65 mm

30, 45, 65 mm

30, 45, 65 mm

30, 45, 65 mm

Certifications
5 Product Selection

cULus Listed, CE Marked cULus Listed, CE Marked cULus Listed, CE Marked cULus Listed, CE Marked cULus Listed, CE Marked

Page 11-3

Page 11-4

Page 11-5

Page 11-6

Page 11-7

6

7 8 9 10

Bulletin Type Operating Temperature Storage Temperature Wire Size Light Beam Angle LED Color Light Output Lens Material Base Material Weight Standards Compliance Certifications Product Selection

855L Panel Light Bars -31...+122 °F (-35...+50 °C) -31...+185 °F (-35...+85 °C) 22...14 AWG (0.5...2.5 mm2)
~70° White 410 lumens Polycarbonate (clear) Polycarbonate (light grey) <1 lbs (380 g) EN61000-6-2, EN61000-6-3, EN60947-5-1 CE Marked Page 11-11

11

12

13
11-2

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855P
Panel Mount Signaling Alarms
Product Selection

Bulletin 855P -- Panel Mount Signaling Alarms

Table of Contents

Mounts in standard 22.5 mm hole Watertight panel alarms in three different sizes Sound output 72...105 dB @ 1 meter UL Type 4/4X/13, IP65 Combination sounder and LED products Panel mount strobe or LED indicator products

Product Selection ...... this page

0

Accessories.................. 11-7

Specifications.............. 11-8

Approximate

Dimensions................... 11-9

1

Plug-in terminal blocks, IP2X finger-safe rated Single-circuit functions include:

Standards Compliance

- Sounder with selectable continuous or pulsing tone (also wobble EN/IEC 60947-1

on 65 mm) - Combined sounder with LED beacon

EN/IEC 60947-5-1 UL 508

2

- Xenon flashing strobe

CSA C22.2 No. 14

- LED beacon, selectable steady, or flashing

Certifications

Dual-circuit functions include: - Two-color LED beacon half-lens illumination - Two-color LED beacon full-lens illumination - Combined sounder with LED beacon

cULus Listed (File No. E14840,

Guides NKCR, NKCR7) CE Marked

3

Product Selection

Bulletin 855P -- Panel Mount Sounder

4

855P ­ B 10 ME 22

a

b

c

d

5

30 mm Panel Mount Sounder

Code B

a
Housing Color Description Black

Code 30 10 20

b
Voltage Description
12...24V AC/DC 120V AC 240V AC

Voltage

12...24V AC/DC

120V AC

6

45 mm Panel Mount Sounder

65 mm Panel Mount Sounder

c

d

7

Size

Mounting Hole

Code

Description

Code

Description

SE

30 mm, fully-enclosed, smooth front, 72 dB

22

22.5 mm

8

SH

30 mm, high output, 80 dB

ME

45 mm

LE

65 mm

9

Description 30 mm diameter, fully-enclosed, smooth front, 72 dB
30 mm diameter, high output, 80 dB 45 mm diameter, 100 dB 65 mm diameter, 105 dB
30 mm diameter, fully-enclosed, smooth front, 72 dB 30 mm diameter, high output, 80 dB 45 mm diameter, 100 dB 65 mm diameter, 105 dB

Cat. No. 855P-B30SE22 855P-B30SH22 855P-B30ME22 855P-B30LE22 855P-B10SE22 855P-B10SH22 855P-B10ME22 855P-B10LE22

10 11 12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-3

Bulletin 855P
Panel Mount Signaling Alarms
Product Selection

Bulletin 855PC -- Panel Mount Combined Sounder with LED Beacon

0

855PC ­ B 10 ME 3 22

a

b

c

d

e

1

2

45 mm Panel Mount Combined Sounder with LED Beacon

65 mm Panel Mount Combined Sounder with LED Beacon

3 Code B
4 Code
12 24 10
5 20

a
Housing Color Description Black
b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC

Code ME LE

c
Diameter Description 45 mm 65 mm

Code 3 4 5 6 7 8
Code 22

d
Lens Color Description Green Red Amber Blue Clear Yellow
e
Mounting Hole Description 22.5 mm

Voltage
6
24V AC/DC
7
120V AC
8

Diameter [mm] 45 65 45 65

Lens Color Green Red Green Red Green Red Green Red

Cat. No. 855PC-B24ME322 855PC-B24ME422 855PC-B24LE322 855PC-B24LE422 855PC-B10ME322 855PC-B10ME422 855PC-B10LE322 855PC-B10LE422

9

10

11

12

13
11-4

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855PS -- Panel Mount Strobe §
855PS ­ B
a

Bulletin 855P
Panel Mount Signaling Alarms
Product Selection

10 ME 3 22

0

b

c

d

e

1

30 mm Panel Mount Strobe

Code B

a
Housing Color Description Black

Code 12 24 10 20 30

b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC
12...24V AC/DC

Voltage 24V AC/DC

12...24V AC/DC

120V AC
 30 mm units are LED type. § 45 and 65 mm units are Xenon strobe.

2

45 mm Panel Mount Strobe

65 mm Panel Mount Strobe

c

Code SE ME

Diameter Description 30 mm1 45 mm

LE

65 mm

1 Only available in 12V AC/DC, 24V AC/DC, 120V AC, or 240V AC. Only available in 12...24V AC/DC, 120V, or 240V AC.

Code 3 4 5 6 7 8

Diameter [mm] 30 45 65 30 45 65

Code 22
Lens Color Green Red Green Red Green Red Green Red Green Red Green Red

d

3

Lens Color

Description

Green

Red Amber

4

Blue

Clear

Yellow
5
e

Mounting Hole

Description

22.5 mm

6

Cat. No.

855PS-B24SE322

855PS-B24SE422

855PS-B30ME322

7

855PS-B30ME422

855PS-B30LE322

855PS-B30LE422

855PS-B10SE322 855PS-B10SE422

8

855PS-B10ME322

855PS-B10ME422

855PS-B10LE322

855PS-B10LE422

9

10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-5

Bulletin 855P
Panel Mount Signaling Alarms
Product Selection

Bulletin 855PB -- Panel Mount Selectable Steady or Flashing LED Beacon

0

855PB ­ B 10 ME 3 22

a

b

c

d

e

1

2

30 mm Panel Mount LED Beacon

3 Code B

a
Housing Color Description Black

4 Code
12
24
10
5 20

b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC

Voltage
6
24V AC/DC
7

8

120V AC

9

45 mm Panel Mount LED Beacon

Code SE ME LE

c
Diameter Description 30 mm 45 mm 65 mm

Diameter [mm] 30 45 65 30 45 65

65 mm Panel Mount LED Beacon

Code 3 4 5 6 7 8

d
Lens Color Description Green Red Amber Blue Clear Yellow

Code 22

e
Mounting Hole Description 22.5 mm

Lens Color Green Red Green Red Green Red Green Red Green Red Green Red

Cat. No. 855PB-B24SE322 855PB-B24SE422 855PB-B24ME322 855PB-B24ME422 855PB-B24LE322 855PB-B24LE422 855PB-B10SE322 855PB-B10SE422 855PB-B10ME322 855PB-B10ME422 855PB-B10LE322 855PB-B10LE422

10

11

12

13
11-6

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855PD -- Panel Mount Dual Circuit Alarms

855PD ­ B 24

a

b

ME
c

Bulletin 855P
Panel Mount Signaling Alarms
Product Selection

F 3 4 22

0

d

e

f

g

1

Half-Lens Illumination

Full-Lens Illumination

Combined Sounder with LED Beacon

Code B
Code 121 24 10 20
Code SE ME LE

a
Housing Color Description Black
b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC
c
Diameter Description 30 mm  45 mm 65 mm

d

Function

Code

Description

F

2-color, full-lens illumination

H 2-color, half-lens illumination wtih barrier

C Combined sounder with LED beacon

e

Code 1 3 4 5 6 7 8

LED Color1/Sound Description Sound Green Red Amber Blue Clear Yellow

Code 3 4 5 6 7 8
Code 22

f
LED Color§ Description Green Red Amber Blue Clear Yellow
g
Mounting Hole Description 22.5 mm

30 mm available in 24V AC/DC only, for 2-color versions.  The sounder with LED is not available in the 30 mm size. 1 Voltage code 12 is only valid for sounder with LED devices.  The color combination of Yellow and Amber is not allowed because of their similarity. § For two-color devices, the first color code listed in the cat. no. corresponds to the same side as the panel tab found on the housing. For example:
Cat. No. 855PD-B24MEH4322 indicates that the Red color is on the same side as the panel tab and the Green color is on the opposite side as the panel tab.

The products listed in the table below are typically in stock. Additional configurations (voltage, size, color, and sound) are available with extended leadtimes. Contact your local Rockwell Automation sales office or Allen-Bradley distributor for details on availability and pricing.

Function Sounder with LED Half-lens, Steady LED Beacon Full-lens, Steady LED Beacon

Voltage 24V AC/DC
120V AC
24V AC/DC 120V AC
24V AC/DC 120V AC

Diameter [mm]
45
65
45
65
30 45 65 45 65 30 45 65 45 65

Color(s) Green Red Green Red Green Red Green Red
Red & Green
Red & Green
Red & Green
Red & Green

Cat. No. 855PD-B24MEC1322 855PD-B24MEC1422 855PD-B24LEC1322 855PD-B24LEC1422 855PD-B10MEC1322 855PD-B10MEC1422 855PD-B10LEC1322 855PD-B10LEC1422 855PD-B24SEH4322 855PD-B24MEH4322 855PD-B24LEH4322 855PD-B10MEH4322 855PD-B10LEH4322 855PD-B24SEF3422 855PD-B24MEF3422 855PD-B24LEF3422 855PD-B10MEF3422 855PD-B10LEF3422

Accessories

Description 22.5...30.5 mm Hole adapter kit

Cat. No. 855P-AHA1

2 3 4 5 6 7 8 9 10 11 12 13

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

11-7

Bulletin 855P
Panel Mount Signaling Alarms
Specifications

Panel Sounder and Single/Dual Circuit Panel Sounder with LED

0
Housing:

Base Material Lens

Protection class

1

Terminals Operation temperature range

Storage temperature range

Mounting

Mounting nut torque
2

Technical

Polycarbonate, black

Polycarbonate, red, amber, yellow, green, blue, and clear

UL Type 4/4X/13, IP65

Plug-in terminal block, up to 2.5 mm2 (14 AWG), IP2X

-25...+60 °C (-13...140 °F)

-25...+85 °C (-13...185 °F)

Central mounting for bore holes 22 mm or 30.5 mm with hole adapter kit (Cat. No. 855P-AHA1)

1.7 N·m (15 lb·in)

Electrical

Sounder

Sounder with Warning Light

12V AC/DC - 50/60 Hz

3

24V AC/DC - 50/60 Hz

Supply voltage range 12...24V AC/DC - 50/60 Hz

120V AC - 50/60 Hz

230/240V AC - 50/60 Hz

4

Nominal current 

12V AC/DC - 50/60 Hz 24V AC/DC - 50/60 Hz

single circuit

(dual circuit)

120V AC - 50/60 Hz

230/240V AC - 50/60 Hz

Turn-on leakage current
5 Maximum sound level (average)

Minimum sound level

Sound level adjustment

6

Sound main frequency Continuous

Sound types

Pulsing1

Alternating frequency1

Sound selection
7 Weight

65 mm -- --
8...26V AC/DC 50...140V AC 150...260V AC
-- 57 mA 40 mA 42 mA 3 mA
105 dBA @ 1 m
<85 dB Stepless 3300 Hz
Yes Yes Yes
65 g

45 mm

30 mm

65 mm

--

--

+/­10%

--

--

+/­10%

8...26V AC/DC

10...26V AC/DC

--

50...140V AC

80...140V AC

+/­10%

150...260V AC

180...260V AC

+/­10%

--

--

50 mA (62 mA)

20 mA

20 mA

73 mA (95 mA)

40 mA

20 mA

60 mA (52 mA)

42 mA

20 mA

63 mA (52 mA)

3 mA

3 mA

3 mA

100 dBA @ 1 m

SE: 72 dBA @ 1 m SH: 80 dBA @ 1 m

103 dBA @ 1 m

<85 dB

--

<85 dB

Stepless

--

Stepless

3300 Hz

3500 Hz

3300 Hz

Yes

Yes

Yes

Yes

Yes

Yes

No

No

Yes

Externally by terminal connection

35 g

25 g

85 g

45 mm +/­10% +/­10%
-- +/­10% +/­10% 35 mA (48 mA) 58 mA (73 mA) 40 mA (51 mA) 42 mA (51 mA) 3 mA
98 dBA @ 1 m
<85 dB Stepless 3300 Hz
Yes Yes No
55 g

1 Single Circuit only.

8

9

10

11

12

13
11-8

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855P
Panel Mount Signaling Alarms
Specifications/Approximate Dimensions

Panel Strobe and Single/Two Color LED Lights

Housing:

Base Material Lens

Technical

0

Polycarbonate, black

Polycarbonate, red, amber, yellow, green, blue, and clear

Protection class

UL Type 4/4X/13, IP2X, IP65

Terminals Operation temperature range

Plug-in terminal block, up to 2.5 mm2 (14 AWG), IP2X finger-safe -25...+60 °C (-13...+140 °F)

1

Storage temperature range

-25...+85 °C (-13...+185 °F)

Mounting

Central mounting for bore holes 22 mm or 30.5 mm with hole adapter kit (Cat. No. 855P-AHA1)

Mounting nut torque

1.7 N·m (15 ib·in)

Electrical

2

LED Beacon -- Steady/Flashing

Strobe Light

65 mm

45 mm

30 mm

65 mm

45 mm

30 mm

12V AC/DC - 50/60 Hz

+/­10%

+/­10%

+/­10%

--

--

+/­10%

Supply voltage range

24V AC/DC - 50/60 Hz 12...24V AC/DC 50/60 Hz 120V AC - 50/60 Hz

+/­10% --
+/­10%

+/­10% --
+/­10%

+/­10%

--

--

+/­10%

3

--

8...26V AC/DC 8...26V AC/DC

--

+/­10%

+/­10%

+/­10%

+/­10%

230/240V AC - 50/60 Hz

+/­10%

+/­10%

+/­10%

+/­10%

+/­10%

+/­10%

12V AC/DC - 50/60 Hz 24V AC/DC - 50/60 Hz

75 mA

60 mA

30 mA

--

54 mA (full: 71 mA 35 mA (full: 46 mA 25 mA (full: 28 mA

half: 44 mA)

half: 39 mA)

half: 30 mA)

--

--

15 mA

4

--

10 mA

Nominal current  12...24V AC/DC 50/60 Hz @ 12V

--

--

--

150 mA

110 mA

--

single color

(two color w/ full or 12...24V AC/DC 50/60 Hz @ 24V

--

--

--

140 mA

100 mA

--

half illumination)

120V AC - 50/60 Hz

25 mA (full: 61 mA 25 mA (full: 35 mA

half: 41 mA)

half: 35 mA)

20 mA

30 mA

20 mA

10 mA

5

230/240V AC - 50/60 Hz

25 mA (full: 61 mA 25 mA (full: 35 mA

half: 41 mA)

half: 34 mA)

20 mA

20 mA

12 mA

10 mA

Turn-on leakage current Steady/Flashing light Flashing frequency

3 mA

3 mA

3 mA

Externally by terminal connection

2 Hz

2 Hz

2 Hz

3 mA

3 mA

3 mA

--

--

--

6

min. 1.4 Hz min. 1.4 Hz min. 1.4 Hz

Light source

LED

Xenon tube

LED

Flash energy

--

--

--

1 J

0.5 J

--

Weight

60 g

40 g

40 g

80 g

60 g

40 g

7

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

30 mm Sounder1

45 mm Sounder

65 mm Sounder

8

9

10

11

1 Terminal connector adds 14 mm (0.55 in.) to back of panel depth. Terminal connector adds 9 mm (0.35 in.) to back of panel depth.
www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

12 13
11-9

Bulletin 855P
Panel Mount Signaling Alarms
Approximate Dimensions
45 mm Combined Sounder with LED Beacon
0

65 mm Combined Sounder with LED Beacon

1

2

3 30 mm LED1 30 mm Strobe1
4 5

45 mm LED 45 mm Strobe

65 mm LED 65 mm Strobe
57 85

6

7
1 Terminal connector adds 14 mm (0.55 in.) to back of panel depth. Terminal connector adds 9 mm (0.35 in.) to back of panel depth.
8

9

10

11

12

13
11-10

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Cat. No. 855L-NX1
Cat. No. 855L-NX2
Product Selection

Bulletin 855L
Panel Light Bars
Product Overview/Selection and Specifications

Bulletin 855L -- Panel Light Bars

Standards Compliance

Long LED life unlike fluorescent lights

EN61000-6-2

0

Energy savings, minimum impact on power supply size

EN61000-6-3

Ideal for environments with high shock and vibration

No transformer required

EN60947-5-1

Low weight due to absence of heavy ballast No electrical noise unlike fluorescent fixtures Low heat output

Certifications CE Marked

1

Solid light without flicker

No need to ship separate components once the panel is assembled

No glass or hazardous waste

2

Description With On/Off switch
Without On/Off switch

Supply Voltage 24...48V AC/DC 50/60 Hz 110/120...230/240V AC/DC 50/60 Hz 24...48V AC/DC 50/60 Hz 110/120...230/240V AC/DC 50/60 Hz

3
Cat. No. 855L-NX1
4 855L-NX3
855L-NX2
5 855L-NX4

Specifications
Nominal Input Voltage
Input Voltage Limits
Nominal Current Inrush Current Leakage Current
Immunity
Ingress Protection
Operating Temperature Range
Storage Temperature Range
Wire Size Light Beam Angle
LED Color Light Output Lens Material Base Material Mounting Orientation Mounting Screws1
Weight Standards Compliance
Certifications LED MTFB
1 Not provided.

855L-NX1 (24...48V with ON/OFF switch) 855L-NX2 (24...48V - no switch) 24...48V AC/DC 50/60 Hz
17...63V DC 17...53V AC 50/60 Hz
~300 mA @ 24V DC/ ~150 mA @ 48V DC
~4 A @ 48V DC, +25 °C

855L-NX3 (110...240V with ON/OFF switch) 855L-NX4 (110...240V - no switch) 110...240V AC/DC 50/60 Hz
90...320V DC 90...250V AC 50/60 Hz
<70 mA @ 120V AC/ <55 mA @ 240V AC
~1.7 A @ 120V AC/ ~3.4 A @ 240V AC

>8 mA DC

>3 mA AC/~1 mA DC

855L-NX1: NEMA 1, IP40 855L-NX2: NEMA 1, IP44

855L-NX3: NEMA 1, IP40 855L-NX4: NEMA 1, IP44

-31...+122 °F (-35...+50 °C)

-31...+185 °F (-35...+85 °C)
22...14 AWG (0.5...2.5 mm2) ~70° White
410 lumens Polycarbonate (clear) Polycarbonate (light grey)
No restrictions 2 X 1/4 in. (M5/ M6)
<1 lb (380 g) EN61000-6-2, EN61000-6-3, EN60947-5-1
CE Marked 100 000 hr

6 7 8 9 10 11 12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-11

Bulletin 855L
Panel Light Bars
Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

0

419 mm

(16.50 in.)

1

65 mm (2.56 in.)

2

30 mm (1.18 in.)

3

4
367 mm (14.45 in.)
5

6

7

8

9

10

11

12

13
11-12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855H, 855B
Industrial Horns and Beacons
Product Overview

0

Bulletin

855H

855B

855BS

855BM

855BL

Type

General Purpose Horns and High Performance Horns (with or without Beacons)

Square Beacons

90 mm

Round Beacons 120 mm

160 mm

Voltages Available

General Purpose Horn (Standard): 24V AC/DC 50/60 Hz,
120V AC 50/60 Hz, 240V AC 50/60 Hz General Purpose Horn (Enhanced):
10...30V DC, 40...260V AC/DC High Performance Horn: 10...30V DC, 24V AC 50/60 Hz, 110V AC 50/60 Hz,
230V AC 50/60 Hz High Performance Horn w/Beacon: 12V DC, 24V DC, 24V AC 50/60 Hz, 110V AC 50/60 Hz, 230V AC 50/60 Hz

24V AC/DC, 110V AC 50/60 Hz, 230V AC 50/60 Hz

12V AC/DC, 24V AC/DC, 120V AC 50/60 Hz, 240V AC 50/60 Hz

Illumination Type

5 J strobe

5 J strobe

LED, 7 J strobe, or 20 W 15 J strobe or 35 W 31 J strobe or 50 W

halogen

halogen

halogen

Flash Rate

--

1 Hz

1 Hz strobe and flashing halogen

Lens Colors Available

Red, green, amber, blue, yellow, clear

Red, green, amber, blue, yellow, clear

Red, green, amber, blue, yellow, clear

Environmental Rating

General Purpose Horn: Semiflush: UL Type 13/3R, IP54 Surface: UL Type 4/4X/13/3R, IP66
High Performance Horn: UL Type 13/3R, IP56

Type 13, IP66

UL Type 4/4X/13, IP65

Operating Temp. Range

-25...+55 °C

-25...+55 °C

-25...+60 °C except steady halogen and 120/240V single-color LED are -25...+50 °C

-25...+60 °C, except rotating and steady
halogen are -25...+50 °C

-25...+60 °C except rotating and steady
halogen are -25...+50 °C

Steady-State Current

General Purpose Horn: 40...220 mA High Performance Horn: Range A: 13...40 mA Range B & C: 15...40 mA Range D: 60...500 mA Range E: 120...1000 mA

24V AC/DC (365/250 mA), 110V AC (100 mA), 230V AC (50 mA)

0.1...1.7 A

0.15...3.2 A

0.21...4.2 A

Sound Output

100...126 dB

--

--

--

--

General Purpose Horn: 3 Tones

High Performance Horn:

Horn Tones

Range A: 10 Tones

--

Range B & C: 32 Tones

Range D & E: 45 Tones

--

--

--

Volume Adjustable

Range A, B, C: 16 dB from max. Range D, E: 6 dB from max.

--

--

--

--

General Purpose Horn: 1 on GPA

units, 2 on GPE units

Circuits Available

High Performance Horn:

--

Range A: 2 on DC units, 1 on AC units

Range B, C, D, E: 3 on all units

--

--

--

Horn Cover, Base, Beacon Housing, and Lens Material

Polycarbonate (except for ABS: High Performance
Horn cover & base)

Polycarbonate

Polycarbonate

Illumination Functions

--

LED (single, strobe,

--

multi-color)

--

Strobe, rotating, steady or flashing, halogen

Certifications

cULus Listed, CE

cULus Listed, CE

cULus Listed, CE

Product Selection

Page 11-14

Page 11-21

Page 11-23

1 2 3 4 5 6 7 8 9 10 11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-13

Bulletin 855H
General Purpose Electronic Horns
Product Selection/Accessories

Bulletin 855H -- General Purpose Electronic Horns

Table of Contents

0

108 dB(A) max. (standard version), 113 dB(A) max. (enhanced version)

Product Selection ...... this page

Three user-selectable tones to better contrast ambient noise

Accessories.................. this page

Two stages available in the enhanced version

Specifications.............. 11-19

Stepless volume control via potentiometer to adjust to changing

Approximate

1

ambient noise

Dimensions................... 11-20

Lower current consumption at approximately half to one tenth of

electromechanical alternative

Longer life and maintenance-free due to non-moving parts and highly reliable discrete components

Standards Compliance

2

No back EMF at switch off

UL 464 CSA C22.2 No. 205

Suitable for humid, dirty, and corrosive environments

EN/IEC 60947-1

Surface mount version rated UL Type 4/4X/13/3R, IP66

EN/IEC 60947-5-1

Semi-flush mount version rated UL Type 3R/13, IP54

EN 6100-6-2

3

UV-stable plastics ideal for outdoors

EN 6100-6-3 Certifications

4 General Purpose Electronic Horns

cULus Listed (File No. S6583, Guides UCST, UCST7) CE Marked

Single- or dual-circuit, selectable tone horns, with volume control, for use in general signaling applications.

5

855H ­ SG 10 GPA

a

b

c

6 7 8 9 10

a

b

Mounting Type

Voltage

Code

Description

FG

Semi-flush wall plate, grey housing

SG

Surface base with two conduit entrances, grey housing

Code 24 10 20 30 45

Description 24V AC/DC
120V AC 240V AC 10...30V DC 40...260V AC/DC 50/60 Hz

Code GPA
GPE

Note: Horn type GPE (Table c) not valid with mounting type FG (Table a) or with voltage codes 24, 10, and 20 (Table b). Horn type GPA (Table c) not valid with voltage codes 30 and 45 (Table b).

c
Horn Type
Description
General purpose, 108 dB(A) max., single stage/circuit, three tones
Enhanced version, 113 dB(A) max. @ 1 m, two stage, three tones, volume control

Mounting Type Surface base with conduit entrance Semi-flush wall plate

Function Standard Enhanced Standard

Supply Voltage 24V AC/DC 120V AC 240V AC 10...30V DC
40...260V AC/DC 24V AC/DC 120V AC 240V AC

Cat. No. 855H-SG24GPA 855H-SG10GPA 855H-SG20GPA 855H-SG30GPE 855H-SG45GPE 855H-FG24GPA 855H-FG10GPA 855H-FG20GPA

Accessories
11
12

Description
M20 Hole Plug Replacement Kit For use with mounting type SG only

Cat. No. 855H-AHPK

13
11-14

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Specifications General Purpose Electronic Horns

Ingress Ratings

Semi-flush Mount Surface Mount

Temperature Ranges

Housings including horn cover and base O-ring Gasket (mounting type FG)

Sound Output

Input Voltage Ranges

Standard (GPA) Enhanced (GPE)

Output Currents @ Nominal Voltage

Bulletin 855H
General Purpose Electronic Horns
Specifications/Approximate Dimensions

0

Environmental Ratings

UL Type 3R/13, IP54

UL Type 4/4X/13/3R, IP66

Operating

Storage

1

-25...+55 °C (-13 ...+131 °F)

-40...+70 °C (-40 ...+158 °F)

Materials

Polycarbonate

NBR

2

EPDM/SBR closed cell foam

Performance Ratings

105±3 dB(A) @ 1 m (standard), 110±3 dB(A) @ 1 m (enhanced)

Operating Voltages and Currents DC Voltage

AC Voltage

3

24V DC (+/-25%)

24V AC 50/60 Hz (+/-10%)

120V AC 50/60 Hz (+/-10%)

240V AC 50/60 Hz (+/-10%)

0...30V DC 62 mA

220 mA

40...260V AC/DC 40 mA

50 mA

4

Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

5

Semi-flush Mount

Surface Mount

6

151.9 [ 6.0 ]

115.9

[ 4.6 ]

7

151.9 [ 6.0 ]

29.8 [ 1.2 ]

115.9 [ 4.6 ]

8
63.2 [ 2.5 ]
9
10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-15

Bulletin 855H
High-Performance Horns
Product Selection

Bulletin 855H -- High-Performance Electronic Horns

0

Available as stand-alone electronic horn or with optional xenon strobe beacon

Decibel range 100...126 dB(A) @ 1 meter, in five sizes to meet broad range of applications

Up to three stages/circuits in each horn to reduce initial and

1

installation costs when multi-status indication is required

Up to 45 tone sets selectable via dip-switches

Automatic tone synchronization when multiple horns are connected

Lower current consumption compared to electromechanical

alternative

2

Fine volume control via potentiometer to compensate for changing

ambient noise

Longer life and maintenance-free, due to non-moving parts and highly reliable discrete components

UV-stable plastic housing, ideal for outdoors

3

UL Type 13/3R, IP56

4 High-Performance Electronic Horns
855H ­ B D30 B D

a

b

c

d

5

Table of Contents
Industrial Horns .......... this page Horns with Beacons . 11-17 Accessories.................. 11-18 Specifications.............. 11-19 Approximate Dimensions................... 11-20
Standards Compliance UL 464 CSA C22.2 No. 205 EN/IEC 60947-1 EN/IEC 60947-5-1 EN 6100-6-2 EN 6100-6-4
Certifications cULus Listed (File No. S6583, Guides UCST, UCST7) CE Marked

6
Range "A" Industrial Horn

Range "C" Industrial Horn

Range "E" Industrial Horn

7
Code B
8
Code D30
9 A24 A10 A20
10
11
12
13

a
Product Type Description
Industrial horn, grey housing
b
Voltage Description 10...30V DC
24V AC 50/60 Hz 115V AC 50/60 Hz 230V AC 50/60 Hz
Sound Output 100 dB max. at 1 m, 2 circuit DC, 1 circuit AC, 10 selectable tones 104 dB max. at 1 m, 3 circuit AC or DC, 32 selectable tones 112 dB max. at 1 m, 3 circuit AC or DC, 32 selectable tones 119 dB max. at 1 m, 3 circuit AC or DC, 45 selectable tones 126 dB max. at 1 m, 3 circuit AC or DC, 45 selectable tones

Code A B C D E

c
Horn Type Description
100 dB, 10 tone, 2-stage (DC) 100 dB, 10 tone, 1-stage (AC) 104 dB, 32 tone, 3-stage (DC) 104 dB, 32 tone, 3-stage (AC) 112 dB, 32 tone, 3-stage (DC) 112 dB, 32 tone, 3-stage (AC) 119 dB, 45 tone, 3-stage (DC) 119 dB, 45 tone, 3-stage (AC) 126 dB, 45 tone, 3-stage (DC) 126 dB, 45 tone, 3-stage (AC)

d

Mount Option

Code

Description

Standard base for surface or on-the-wall D mounting with conduit openings and hole
plugs

Supply Voltage 10...30V DC
115V AC, 50/60 Hz 10...30V DC
115V AC, 50/60 Hz 10...30V DC
115V AC, 50/60 Hz 10...30V DC
115V AC, 50/60 Hz 10...30V DC
115V AC, 50/60 Hz

Cat. No. 855H-BD30AD 855H-BA10AD 855H-BD30BD 855H-BA10BD 855H-BD30CD 855H-BA10CD 855H-BD30DD 855H-BA10DD 855H-BD30ED 855H-BA10ED

11-16

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

High-Performance Electronic Horns with Attached Strobe Beacons

855H ­ BC D12 E D

a

b

c

d

Bulletin 855H
High-Performance Horns
Product Selection

R3

0

e

f

1

2

Range "A" Horn with Beacon

Range "C" Horn with Beacon

Range "E" Horn with Beacon

a

c

e

Code

Product Type Description

Code

Horn Type Description

Illuminated Function

3

Code

Description

BC

Electronic horn with Xenon strobe beacon, grey housing

100 dB, 10 tone, 2-stage (DC) A
100 dB, 10 tone, 1-stage (AC)

R

5J strobe
f

b

104 dB, 32 tone, 3-stage (DC) B
104 dB, 32 tone, 3-stage (AC)

Lens Color

4

Code D12 D24 A24

Voltage Description 12V DC 24V DC
24V AC 50/60 Hz

112 dB, 32 tone, 3-stage (DC) C
112 dB, 32 tone, 3-stage (AC)

Code 3

Description Green

119 dB, 45 tone, 3-stage (DC)

4

Red

D 119 dB, 45 tone, 3-stage (AC)

5

126 dB, 45 tone, 3-stage (DC)

6

Amber Blue

5

A10

115V AC 50/60 Hz

E 126 dB, 45 tone, 3-stage (AC)

7

Clear

A20

230V AC 50/60 Hz

8

Yellow

d

Mount Option

6

Code

Description

Standard base for surface or on-the-wall
D mounting with conduit openings and hole
plugs
7

8

9

10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-17

Bulletin 855H
High-Performance Horns
Product Selection/Accessories
Sound Output
0
100 dB max. at 1 m, 2 circuit DC, 1 circuit AC,
10 selectable tones
1

104 dB max. at 1 m,

3 circuit AC or DC,

2

32 selectable tones

3

112 dB max. at 1 m,

3 circuit AC or DC,

32 selectable tones

4
119 dB max. at 1 m, 3 circuit AC or DC, 45 selectable tones
5

126 dB max. at 1 m,

6

3 circuit AC or DC, 45 selectable tones

7
Accessories
8

9

10

Cat. No. 855H-AGKBAB

11

12

Voltage 24V DC 115V AC, 50/60 Hz 24V DC 115V AC, 50/60 Hz 24V DC 115V AC, 50/60 Hz 24V DC 115V AC, 50/60 Hz 24V DC 115V AC, 50/60 Hz

Beacon Lens Color Green Red Amber Green Red Amber Green Red Amber Green Red Amber Green Red Amber Green Red Amber Green Red Amber Green Red Amber Green Red Amber Green Red Amber

Cat. No. 855H-BCD24ADR3 855H-BCD24ADR4 855H-BCD24ADR5 855H-BCA10ADR3 855H-BCA10ADR4 855H-BCA10ADR5 855H-BCD24BDR3 855H-BCD24BDR4 855H-BCD24BDR5 855H-BCA10BDR3 855H-BCA10BDR4 855H-BCA10BDR5 855H-BCD24CDR3 855H-BCD24CDR4 855H-BCD24CDR5 855H-BCA10CDR3 855H-BCA10CDR4 855H-BCA10CDR5 855H-BCD24DDR3 855H-BCD24DDR4 855H-BCD24DDR5 855H-BCA10DDR3 855H-BCA10DDR4 855H-BCA10DDR5 855H-BCD24EDR3 855H-BCD24EDR4 855H-BCD24EDR5 855H-BCA10EDR3 855H-BCA10EDR4 855H-BCA10EDR5

Description

Cat. No.

M20 Hole Plug Replacement Kit

855H-AHPK

Description Gasket Set Replacement Kit
Description Replacement Beacon Light Lens

Type Range A, B, and Beacon
Light Range C Horn Range D Horn Range E Horn
Color Red Green Amber Blue Clear Yellow

Cat. No.
855H-AGKBAB
855H-AGKC 855H-AGKD 855H-AGKE
Cat. No. 855B-ABLR 855B-ABLG 855B-ABLA 855B-ABLB 855B-ABLC 855B-ABLY

13
11-18

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855H
High-Performance Horns
Specifications

Industrial Electronic Horns and Horns with Strobe Beacons

Shock and Vibration
Range A Horn Range B Horn Range C Horn Range D Horn Range E Horn

Mechanical Ratings

Listed below are reference guidelines for maximum shock and vibration standards for the 855H.

Shock

Vibration

15 G Peak

3 G Peak

15 G Peak

3 G Peak

15 G Peak

3 G Peak

15 G Peak

3 G Peak

15 G Peak

1 G Peak

Range A Horn with Strobe Beacon Range B Horn with Strobe Beacon Range C Horn with Strobe Beacon Range D Horn with Strobe Beacon Range E Horn with Strobe Beacon

Ingress Ratings

Electronic Horns Horn with Beacon

Electronic Horns Temperature Ranges
Horns with Beacons

Horn Cover and Base Beacon Housing Beacon Lens Gasket (Cover to Base) Gasket (Enclosure back to wall) Gasket (Horn to Beacon) Gasket (Screw Mounting Hole)

Range A Horn Range B Horn Range C Horn Range D Horn Range E Horn
Strobe Beacon

All Horns All Horns with Strobe Beacon
Horns 10...30V DC 24V AC 50/60 Hz 115V AC 50/60 Hz 240V AC 50/60 Hz
Horns with Strobe Beacon 12V DC 24V DC 24V AC 115V AC 240V AC
Strobe Beacon

15 G Peak

3 G Peak

15 G Peak

3 G Peak

15 G Peak

3 G Peak

15 G Peak

3 G Peak

15 G Peak

1 G Peak

Environmental Ratings

UL Type 13/3R, IP56

UL Type 13, IP56

Operating

Storage

­13...+131 °F (­25...+55 °C)

­40...+167 °F (­40...+75 °C)

­13...+131 °F (­25...+55 °C)

­40...+167 °F (­40...+75 °C)

Materials

ABS

Polycarbonate

Polycarbonate

Nitrile 70

Nitrile 70

Nitrile 70

Fiber

Performance Ratings

Sound Output

100 dB max. @ 1 meter

104 dB max. @ 1 meter

112 dB max @ 1 meter

119 dB max @ 1 meter

126 dB max @ 1 meter

Xenon Lamp Rating

5 Joule Output

Operating Voltage

DC Voltage

AC Voltage

10...30V DC

24V AC 50/60 Hz (+/-10%)

115V AC 50/60 Hz (+/-10%)

230V AC 50/60 Hz (+/-10%)

12V DC (+/-10%)

24V DC (+/-10%)

24V AC 50/60 Hz (+/-10%)

115V AC 50/60 Hz (+/-10%)

230V AC 50/60 Hz (+/-10%)

Current Consumption

Range A

Range B

Range C

RangeD

Range E

25 mA

25 mA

25 mA

200 mA

950 mA

40 mA

40 mA

40 mA

500 mA

1000mA

13 mA

20 mA

20 mA

100 mA

240 mA

13 mA

15 mA

15 mA

60 mA

120 mA

525 mA 275 mA 405 mA 113 mA 63 mA

525 mA 275 mA 405 mA 120 mA 65 mA Flashing Frequency

525 mA 275 mA 405 mA 120 mA 65 mA
1 Hz

700 mA 450 mA 865 mA 200 mA 110 mA

1450 mA 1200 mA 1200 mA 340 mA 170 mA

0 1 2 3 4 5 6 7 8 9 10 11 12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-19

Bulletin 855H
High-Performance Horns
Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

0 Horns Range A&B

Range C

1

2 3 Range D

Range E

4

5

6
Horns with Beacons Range A&B
7

Range C

8

9

10 Range D

Range E

11

12

13
11-20

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855B
Mini Square Beacons
Product Selection

Bulletin 855B -- Mini Square Beacons
High-intensity, 5 Joule Xenon strobe beacon UL Type 13/3R, IP66

Standards Compliance
UL 464 UL 1638 CSA C22.2 No. 205 EN/IEC 60947-1 EN/IEC 60947-5-1 EN 6100-6-2 EN 6100-6-4 CAN/ULC-S526-M87

Certifications
cULus Listed (File No. E197159, Guides UEES, UEES7) CE Marked

Table of Contents
0 Product Selection ...... this page
Specifications.............. 11-22 Approximate Dimensions................... 11-22
1
2

3
Mini square 5 Joule strobe beacons for general signaling applications. Bases accept conduit connections in side and back of enclosure.

855B ­ G MS 12 R 3

a

b

c

d

e

4

Code G
Code MS

a
Housing/Color Description Grey
b
Beacon Type Description
Mini-square beacon

Code 24 10 20
Code R

Mini Square Strobe Beacon
c
Voltage Description 24V AC/DC
115V AC 50/60 Hz 230V AC 50/60 Hz
d
Illumination Type Description 5 J strobe

Supply Voltage 24V AC/DC
115V AC, 50/60 Hz 24V AC/DC
115V AC, 50/60 Hz 24V AC/DC
115V AC, 50/60 Hz 24V AC/DC
115V AC, 50/60 Hz 24V AC/DC
115V AC, 50/60 Hz 24V AC/DC
115V AC, 50/60 Hz

Lens Color Green Red Amber Blue Clear Yellow

Cat. No. 855B-GMS24R3 855B-GMS10R3 855B-GMS24R4 855B-GMS10R4 855B-GMS24R5 855B-GMS10R5 855B-GMS24R6 855B-GMS10R6 855B-GMS24R7 855B-GMS10R7 855B-GMS24R8 855B-GMS10R8

Code 3 4 5 6 7 8

e
Lens Color Description Green Red Amber Blue Clear Yellow

5 6 7 8 9 10 11 12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-21

Bulletin 855B
Mini Square Beacons
Accessories/Specifications/Approximate Dimensions

Accessories
0
1

Description Replacement Beacon Light Lens

Color Red Green Amber Blue Clear Yellow

Cat. No. 855B-ABLR 855B-ABLG 855B-ABLA 855B-ABLB 855B-ABLC 855B-ABLY

Specifications
2
Shock and Vibration
All Strobe Beacons
3
Ingress Ratings Operating Temperature Ratings -- All Strobe Beacons
4 Housing and Lens Gaskets

5 All Strobe Beacons

All Strobe Beacons
6
All Strobe Beacons

7

All Strobe Beacons

Mechanical Ratings

Listed below are reference guidelines for maximum shock and vibration standards for the Bul. 855B beacon lights.

Shock

Vibration

50 G Peak

5 G Peak

Environmental Ratings

UL Type 13/3R, IP66

-12...+131 °F (-25...+55 °C)

Materials
Performance Ratings
Operating Voltage 24V AC/DC 230V
(+/-20%) Current Consumption
24V AC/DC 365 mA/250 mA Flashing Frequency

Polycarbonate Nitrile 70
Xenon Lamp Rating 5 Joule
120V AC 50/60 Hz (+/-10%)
120V AC 100 mA
1 Hz

230V AC 50/60 Hz. (+/- 10%)
230V AC 50 mA

Approximate Dimensions
8 Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
Mini Square Beacon
9

10

11

98 (3.86)

12

13
11-22

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855BS/855BM/855BL
Round Beacons
Product Selection

Bulletin 855BS, 855BM, 855BL -- Industrial Round Beacons
Six colors available
LED illumination functions: - Single-color LED with user-selectable steady burning or flashing function - Three-color LED (red, green, amber) - LED Strobe with user-selectable single or double flash - Halogen functions: steady, flashing, or rotating - Xenon function: strobe
Surface, NPT conduit, or tube mounting options
UL Type 4/4X/13, IP65

Product Selection Bulletin 855BS  90 mm Beacons
855BS ­ S
a

10 RH 3

b

c

d

Code S N T
Code 12 24 10 20 35 45

a
Base Type Description
Surface mount1 1/2 in. NPT conduit mount
25 mm tube mount§
b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC
24/48V AC/DC 120/240V AC/DC

c

Code DH FH

Function Description
Steady halogen Flashing halogen

RH

Rotating halogen

BR

Xenon tube strobe

SL LED single color selectable steady/flash®

ML

LED three color

BL

LED strobe selectable single/double flash

Code 345
3 4 5 6 7 8

1 Surface mount base must be installed with rough wall plate for UL Type 4/4X/13 rating, otherwise UL Type 1 only.  Not available in 12V AC/DC. § 25 mm tube mount is UL Recognized, other mounting types are UL Listed. ® SL function uses 35 (16...60V AC/16...80V DC) and 45 (90...250V AC/DC) voltage codes only.
ML function uses 24, 10, and 20 voltage codes only. BL function uses 35 (19...52V AC/16...60V DC), 10, and 20 voltage codes only. Green, Red, Amber color combination is only valid for the three color LED selection (ML).

Table of Contents
90 mm Beacons......... this page 120 mm Beacons ...... 11-25 160 mm Beacons ...... 11-26 Accessories.................. 11-27 Specifications.............. 11-30 Approx. Dimensions . 11-31 Standards Compliance UL 508 EN/IEC 60947-1 EN/IEC 60947-5-1 CSA 22.2 No. 14 Certifications cULus Listed (File No. E14840, Guides NKCR, NKCR7) CE Marked
d
LED/Lens Color Description
Green, red, amber Green Red Amber Blue Clear Yellow

0 1 2 3 4 5 6 7 8 9 10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-23

Bulletin 855BS/855BM/855BL
Round Beacons
Product Selection

90 mm Beacons

0

Base Type

Voltage

1
Surface Mount1
2

24V AC/DC 120V AC

3

4

1/2 in. NPT Conduit

Mount

5

24V AC/DC 120V AC

Function Steady Halogen Rotating Halogen
Xenon Strobe Steady Halogen Rotating Halogen
Xenon Strobe Steady Halogen Rotating Halogen
Xenon Strobe Steady Halogen Rotating Halogen
Xenon Strobe

Color Red Amber Red Amber Red Amber Red Amber Red Amber Red Amber Red Amber Red Amber Red Amber Red Amber Red Amber Red Amber

Cat. No. 855BS-S24DH4 855BS-S24DH5 855BS-S24RH4 855BS-S24RH5 855BS-S24BR4 855BS-S24BR5 855BS-S10DH4 855BS-S10DH5 855BS-S10RH4 855BS-S10RH5 855BS-S10BR4 855BS-S10BR5 855BS-N24DH4 855BS-N24DH5 855BS-N24RH4 855BS-N24RH5 855BS-N24BR4 855BS-N24BR5 855BS-N10DH4 855BS-N10DH5 855BS-N10RH4 855BS-N10RH5 855BS-N10BR4 855BS-N10BR5

6 7 8 9 10 11 12

90 mm LED Beacons

Base Type Surface Mount1
1/2 in. NPT Conduit Mount

Voltage 24/48V AC/DC
120/240V AC/DC 24V AC/DC 120V AC
24/48V AC/DC 120V AC
24/48V AC/DC
120/240V AC/DC 24V AC/DC 120V AC
24/48V AC/DC 120V AC

Function Single-Color LED Three-Color LED Single/Double Strobe LED
Single-Color LED Three-Color LED Single/Double Strobe LED

Color Red Amber Blue Red Amber Blue Green, Red, Amber Green, Red, Amber Red Amber Blue Red Red Amber Blue Red Amber Blue Green, Red, Amber Green, Red, Amber Red Amber Blue Red

Cat. No. 855BS-S35SL4 855BS-S35SL5 855BS-S35SL6 855BS-S45SL4 855BS-S45SL5 855BS-S45SL6 855BS-S24ML345 855BS-S10ML345 855BS-S35BL4 855BS-S35BL5 855BS-S35BL6 855BS-S10BL4 855BS-N35SL4 855BS-N35SL5 855BS-N35SL6 855BS-N45SL4 855BS-N45SL5 855BS-N45SL6 855BS-N24ML345 855BS-N10ML345 855BS-N35BL4 855BS-N35BL5 855BS-N35BL6 855BS-N10BL4

1 When used outdoors, surface mount base must be installed with rough wall plate for NEMA Type 4/4X/13 rating, otherwise NEMA Type 1 only.

13
11-24

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855BS/855BM/855BL
Round Beacons
Product Selection

Bulletin 855BM  120 mm Beacons

855BM ­ S 10 FH 4

a

b

c

d

a

Base Type

Code S N

Description Surface mount1 1/2 in. NPT conduit mount

T

25 mm tube mount

Code 12 24 10 20

b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC

Code DH FH RH BR

c
Function Description
Steady halogen Flashing halogen Rotating halogen
Xenon strobe

Code 3 4 5 6 7 8

d
Lens Color Description Green Red Amber Blue Clear Yellow

1 When used outdoors surface mount base must be installed with rough wall plate for UL Type 4/4X/13 rating, otherwise UL Type 1 only.  Not available in 12V AC/DC.

Base Type Surface Mount1

Voltage 24V AC/DC
120V AC

1/2 in. NPT Conduit Mount

24V AC/DC 120V AC

Function Steady Halogen Rotating Halogen
Strobe Steady Halogen Rotating Halogen
Strobe Steady Halogen Rotating Halogen
Strobe Steady Halogen Rotating Halogen
Strobe

Color Red Amber Blue Red Amber Blue Red Amber Blue Clear Red Amber Blue Red Amber Blue Red Amber Blue Clear Red Amber Blue Red Amber Blue Red Amber Blue Clear Red Amber Blue Red Amber Blue Red Amber Blue Clear

Cat. No. 855BM-S24DH4 855BM-S24DH5 855BM-S24DH6 855BM-S24RH4 855BM-S24RH5 855BM-S24RH6 855BM-S24BR4 855BM-S24BR5 855BM-S24BR6 855BM-S24BR7 855BM-S10DH4 855BM-S10DH5 855BM-S10DH6 855BM-S10RH4 855BM-S10RH5 855BM-S10RH6 855BM-S10BR4 855BM-S10BR5 855BM-S10BR6 855BM-S10BR7 855BM-N24DH4 855BM-N24DH5 855BM-N24DH6 855BM-N24RH4 855BM-N24RH5 855BM-N24RH6 855BM-N24BR4 855BM-N24BR5 855BM-N24BR6 855BM-N24BR7 855BM-N10DH4 855BM-N10DH5 855BM-N10DH6 855BM-N10RH4 855BM-N10RH5 855BM-N10RH6 855BM-N10BR4 855BM-N10BR5 855BM-N10BR6 855BM-N10BR7

1 When used outdoors surface mount base must be installed with rough wall plate for UL Type 4/4X/13 rating, otherwise UL Type 1 only.

0 1 2 3 4 5 6 7 8 9 10 11 12 13

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

11-25

Bulletin 855BS/855BM/855BL
Round Beacons
Product Selection

Bulletin 855BL  160 mm Beacons

0

855BL ­ N 24 DH 5

a

b

c

d

1

a
Base Type

Code

Description

S

Surface mount1

N 1 in. NPT conduit mount

2T

30 mm tube mount

Code 12 24 10 20

b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC

Code DH FH RH BR

c
Function Description
Steady halogen Flashing halogen Rotating halogen
Xenon strobe

Code 3 4 5 6 7 8

d
Lens Color Description Green Red Amber Blue Clear Yellow

3 1 When used outdoors surface mount base must be installed with rough wall plate for UL Type 4/4X/13 rating, otherwise UL Type 1 only.  Not available in 12V AC/DC.

Base Type
4

5

6

Surface Mount1

7

8

9

10
1 in. NPT Conduit Mount
11

12

13

Voltage 24V AC/DC
120V AC 24V AC/DC
120V AC

Function Steady Halogen Rotating Halogen
Strobe Steady Halogen Rotating Halogen
Strobe Steady Halogen Rotating Halogen
Strobe Steady Halogen Rotating Halogen
Strobe

Color Red Amber Blue Red Amber Blue Red Amber Blue Clear Red Amber Blue Red Amber Blue Red Amber Blue Clear Red Amber Blue Red Amber Blue Red Amber Blue Clear Red Amber Blue Red Amber Blue Red Amber Blue Clear

Cat. No. 855BL-S24DH4 855BL-S24DH5 855BL-S24DH6 855BL-S24RH4 855BL-S24RH5 855BL-S24RH6 855BL-S24BR4 855BL-S24BR5 855BL-S24BR6 855BL-S24BR7 855BL-S10DH4 855BL-S10DH5 855BL-S10DH6 855BL-S10RH4 855BL-S10RH5 855BL-S10RH6 855BL-S10BR4 855BL-S10BR5 855BL-S10BR6 855BL-S10BR7 855BL-N24DH4 855BL-N24DH5 855BL-N24DH6 855BL-N24RH4 855BL-N24RH5 855BL-N24RH6 855BL-N24BR4 855BL-N24BR5 855BL-N24BR6 855BL-N24BR7 855BL-N10DH4 855BL-N10DH5 855BL-N10DH6 855BL-N10RH4 855BL-N10RH5 855BL-N10RH6 855BL-N10BR4 855BL-N10BR5 855BL-N10BR6 855BL-N10BR7

11-26

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Lamps

Code S M L
Lenses

a
Size Description
90 mm 120 mm 160 mm

Code S M L

a
Size Description
90 mm 120 mm 160 mm

 Smooth lens for rotating function only.  Fresnel lens not for use with LED beacons. § LED lens for 90 mm only.

Bulletin 855BS/855BM/855BL
Round Beacons
Accessories

855B M ­ LH 10

0

a

b

c

Code LH

b
Function Description Halogen

c

Voltage

1

Code

Description

12

12V AC/DC

24

24V AC/DC

10

120V AC

20

240V AC

2

855B L ­ AFL 4

a

b

c

3

b

c

Function

Lens Color

Code

Description

Code

Description

4

ASL

Replacement smooth lens

3

Green

AFL

Replacement Fresnel lens

4

Red

ALL

Replacement LED lens§

5

Amber

6

Blue

7

Clear

5

8

Yellow

Power Module Assemblies

Code S M L

a
Size Description
90 mm 120 mm 160 mm

855B L ­ ARA 10

a

b

c

Code ARA ADA AFA ABA

b
Function Description
Replacement rotating power module Replacement steady power module Replacement flashing power module Replacement strobe power module

Code 12 24 10 20

c
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC

Miscellaneous Accessories and Replacement Parts

855B

M ­ LS

a

b

Code S M L

a
Size Description
90 mm 120 mm 160 mm

Code ALSG AMM ASFG AMTG AWP AVM
LS ABS ABN ABT

b
Function Description
Lens gaskets (bag of 5) Magnetic mount
Surface mount gaskets (bag of 5) Metric tube gaskets (bag of 5) Rough wall plate1 Vertical bracket
Strobe tube (120 mm or 160 mm only) Surface mount base
NPT conduit mount base Tube mount base

1 Required for UL Type 4/4X/13 rating when using surface mount base outdoors. When used outdoors surface mount base must be installed with rough wall plate for UL Type 4/4X/13 rating, otherwise UL Type 1 only.
www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

6 7 8 9 10 11 12 13
11-27

Bulletin 855BS/855BM/855BL
Round Beacons
Accessories

Description

90 mm

120 mm

160 mm

0

Replacement Lamps Xenon strobe tube

Voltage

Cat. No. 

Cat. No. 855BM-LS

Cat. No. 855BL-LS

12V AC/DC

855BS-LH12 855BM-LH12 855BL-LH12

Halogen for steady burning, flashing, and rotating illumination functions

24V AC/DC 120V AC

855BS-LH24 855BS-LH10

855BM-LH24 855BM-LH10

855BL-LH24 855BL-LH10

1

Replacement Lenses

240V AC Lens Color

855BS-LH20 Cat. No.

855BM-LH20 Cat. No.

855BL-LH20 Cat. No.

Green

855BS-ASL3 855BM-ASL3 855BL-ASL3

Red

855BS-ASL4 855BM-ASL4 855BL-ASL4

Amber

855BS-ASL5 855BM-ASL5 855BL-ASL5

2

Smooth lens for rotating beacon only

Blue Clear

855BS-ASL6 855BS-ASL7

855BM-ASL6 855BM-ASL7

855BL-ASL6 855BL-ASL7

Yellow

855BS-ASL8 855BM-ASL8 855BL-ASL8

Green

855BS-AFL3 855BM-AFL3 855BL-AFL3

Red

855BS-AFL4 855BM-AFL4 855BL-AFL4

3

Amber

855BS-AFL5 855BM-AFL5 855BL-AFL5

Fresnel lens for steady and flashing halogen and

Blue

855BS-AFL6 855BM-AFL6 855BL-AFL6

xenon strobe functions (not for use in LED beacons)

Clear

855BS-AFL7 855BM-AFL7 855BL-AFL7

Yellow

855BS-AFL8 855BM-AFL8 855BL-AFL8

4

Green

855BS-ALL3

--

--

Red

855BS-ALL4

--

--

Amber

855BS-ALL5

--

--

LED lens for 90 mm beacons only

Blue

855BS-ALL6

--

--

5

Clear

855BS-ALL7

--

--

Yellow

855BS-ALL8

--

--

Power Modules

Voltage

Cat. No.

Cat. No.

Cat. No.

12V AC/DC 855BS-ARA12 855BM-ARA12 855BL-ARA12

6

24V AC/DC 120V AC

855BS-ARA24 855BM-ARA24 855BL-ARA24 855BS-ARA10 855BM-ARA10 855BL-ARA10

Rotating power module

240V AC

855BS-ARA20 855BM-ARA20 855BL-ARA20

7

12V AC/DC 24V AC/DC

855BS-ADA12 855BM-ADA12 855BL-ADA12 855BS-ADA24 855BM-ADA24 855BL-ADA24

Steady power module

120V AC

855BS-ADA10 855BM-ADA10 855BL-ADA10

240V AC

855BS-ADA20 855BM-ADA20 855BL-ADA20

12V AC/DC 855BS-AFA12 855BM-AFA12 855BL-AFA12

8

Flashing power module

24V AC/DC 855BS-AFA24 855BM-AFA24 855BL-AFA24

120V AC

855BS-AFA10 855BM-AFA10 855BL-AFA10

240V AC

855BS-AFA20 855BM-AFA20 855BL-AFA20

24V AC/DC 855BS-ABA24 855BM-ABA24 855BL-ABA24

120V AC

855BS-ABA10 855BM-ABA10 855BL-ABA10

9

Strobe power module

240V AC

855BS-ABA20 855BM-ABA20 855BL-ABA20

10  All power modules include a lamp.

11

12

13
11-28

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Description Replacement Bases Surface mount base1 1/2 in. NPT conduit mount base Tube mount base Miscellaneous Accessories and Replacement Parts Lens gasket (must order in multiples of 5) Surface mount gaskets (must order in multiples of 5) Tube mount gaskets (must order in multiples of 5)
Magnetic mount
Rough wall plate

Bulletin 855BS/855BM/855BL
Round Beacons
Accessories

90 mm

120 mm

160 mm

Cat. No. 855BS-ABS

Cat. No. 855BM-ABS

Cat. No. 855BL-ABS

0

855BS-ABN 855BM-ABN 855BL-ABN

855BS-ABT

855BM-ABT

855BL-ABT

Cat. No. 855BS-ALSG

Cat. No. 855BM-ALSG

Cat. No. 855BL-ALSG

1

855BS-ASFG 855BM-ASFG 855BL-ASFG

855BM-AMTG 855BM-AMTG 855BL-AMTG

2
855BS-AMM 855BM-AMM 855BL-AMM

855BS-AWP 855BM-AWP 855BL-AWP

3

Vertical bracket
Screws and washers for rough wall plate and magnetic mount Bonding kit (required for bonding between conduit connections)

855BS-AVM

855BM-AVM

855BL-AVM

4

855BS-ASCW

855BM-ASCW 855BM-ABK

1 When used outdoors surface mount base must be installed with rough wall plate for UL Type 4/4X/13 rating. Required for UL Type 4/4X/13 rating when using surface mount base outdoors.

5

6

7

8

9

10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-29

Bulletin 855BS/855BM/855BL
Round Beacons
Specifications

Specifications

0 Base material

Lenses (all)

Housing Pole mount

base

1

Bracket

Protection class

Terminals (120 mm and 160 mm only)

2

Operation temperature range

Storage temperature range

Mounting
3

Technical Polycarbonate
Polycarbonate, red, amber, yellow, green, blue, and clear 90 mm: polycarbonate
120 mm and 160 mm: aluminum die cast, powder-coated Powder-coated steel
Type 4/4X/13 (surface mount base must be installed with rough wall plate for Type 4/4X/13 rating), IP65
up to 2.5 mm2 (14 AWG)
-25...+60 °C (-13...+140 °F); -25...+50 °C (-13...+122 °F), 120 & 160 mm steady halogen, and 120/240V AC single-color LED
-25...+85 °C (-13...185 °F) Horizontal surfaces: indoor -- direct to the surface, outdoor -- with additional metal plate between surface and base part
Vertical surfaces: with bracket, for indoor and outdoor Tube or NPT conduit mounting: for indoor and outdoor

Steady Halogen

Electrical and Mechanical Flashing Halogen

Strobe

Rotating Light

160 mm 120 mm 90 mm 160 mm 120 mm 90 mm 160 mm 120 mm 90 mm 160 mm 120 mm 90 mm

4 Halogen bulb Bulb socket

50 W

35 W

20 W

50 W

35 W

20 W

--

--

--

50 W

35 W

20 W

GY6.35 GY6.35 GY6.35 GY6.35 GY6.35 GY6.35

--

--

--

GY6.35 GY6.35 GY6.35

Strobe energy

--

--

--

--

--

--

31 J

15 J

7 J

--

--

--

Xenon strobe tube

--

--

--

--

--

--

Helical Helical Helical

--

--

--

5

Strobe tube socket Flashing/Strobe frequency

-- --

-- --

--

--

--

-- Terminals Terminals Terminals --

--

1 Hz

1 Hz

1 Hz

1 Hz

1 Hz

1 Hz

--

-- --

-- --

Rotating speed - selectable via jumper wire

--

--

--

--

--

--

--

--

--

90/180 90/180 90/180

rpm

rpm

rpm

12V AC/DC

4 A

2.9 A

1.6 A

4.2 A

3 A

1.6 A

--

--

--

4.2 A

3.2 A

1.8 A

6

24V AC/DC

2.1 A

1.5 A

Nominal Current

110/120V AC 50/60 Hz

0.42 A

0.29 A

0.8 A 0.2 A

2.1 A 0.42 A

1.5 A 0.3 A

0.8 A 0.2 A

1.9 A 0.7 A

1.3 A 0.32 A

0.48 A 0.21 A

2.3 A 0.58 A

1.7 A 0.32 A

0.95 A 0.30 A

230/240V AC 50 Hz

0.21 A

0.15 A

0.09 A

0.21 A

0.15 A

0.09 A

0.35 A

0.15 A

0.12 A

0.39 A

0.17 A

0.27 A

7 Weight (Surface Mount) Weight (Tube Mount)

900 g 900 g

500 g 500 g

251 g 424 g

900 g 900 g

500 g 500 g

251 g 424 g

900 g 900 g

500 g 500 g

296 g 469 g

900 g 900 g

500 g 500 g

378 g 551 g

8 9 10 11

Electrical and Mechanical

Single-Color Three-Color

LED

LED

90 mm

24V AC/DC

--

155 mA

110/120V AC 50/60 Hz

--

100 mA

Nominal Current

230/240V AC 50 Hz

--

24/48V AC/DC 50/60 Hz

230...270 mA (16...60V AC/ 16...80V DC)

105 mA --

120/240V AC

38...43 mA (90...250V AC)

--

Weight (Surface Mount)

250 g

Weight (Tube Mount)

450 g

Strobe LED
-- 70 mA
70 mA 300 mA (19...52V AC/ 16...60V DC)
--

12

13
11-30

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855BS/855BM/855BL
Round Beacons
Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

90 mm Beacon NPT Conduit Mount

90 mm Beacon Surface Mount

90 mm Beacon Tube Mount

0

1

70 (2.8)

193 (7.6) 41 (1.6)

164 (6.5) 70 (2.8)

2
193 (7.6)
3 4

1/2 in. NPT

Ø 90 (3.5)

90 mm Beacon Vertical Bracket

Ø 90 (3.5) Ø 25
Ø60 (2.4) Ø 5.50 (0.22)
90 mm LED Beacon

Ø 90 (3.5)

5

6

7

8

Ø 20 (0.79)

101 (4.0)

41 (1.6) 70 (2.8)

131 (5.2)

9 10

19 (0.75)

80 (3.15) 100 (3.94)

Ø 6.50 (0.26)

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

11 12 13
11-31

Bulletin 855BS/855BM/855BL
Round Beacons
Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

0 120 mm Beacon NPT Conduit Mount

120 mm Beacon Tube Mount

120 mm Beacon Surface Mount

1

2

3

4

5
1/2 in. NPT
6

7
120 mm Beacon Vertical Bracket
8

9

10

11

12

13
11-32

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855BS/855BM/855BL
Round Beacons
Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

160 mm Beacon NPT Mount

160 mm Beacon Surface Mount

160 mm Beacon Tube Mount

0

1

2

3

4

5
1 in. NPT
6

7
160 mm Beacon Vertical Bracket
8

9

10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-33

Bulletin 855W, 855D, 855F, 855E, 855T
Signal and Control TowerTM Lights
Product Overview
0

1 2 3 4 5 6 7 8 9 10

Bulletin

855D

855E

855T

855W

Type

Compact Control TowerTM Lights  30 mm

Control TowerTM Lights  50 mm

Control TowerTM Lights  70 mm

Wall Mount Signal Lights

Environmental Ratings

UL Type 4/4X/13, IP65 Indoor and outdoor use

UL Type 4/4X/13, IP65 on all bases, lights and caps sound
modules Indoor and outdoor use

UL Type 4/4X/13, IP65 on all bases, lights piezo style sound and caps (sound and light with sound combo modules are IP54)
Indoor and outdoor use

UL Type 4/4X/13, IP65 Indoor and outdoor use

Ease of Assembly, Base Wiring and Lamp Changes

No assembly required - all towers are assembled, wired, and tested
at the factory

No-tools assembly and maintenance, "Twist-off" lenses
for easy lamp changes, topmounted terminal block for easy
base wiring

No-tools assembly and maintenance, "Twist-off" lenses
for easy lamp changes, topmounted terminal block for easy
base wiring

No assembly required - all towers are assembled and tested at the
factory

Illumination Types

LED

Incandescent, socket-mount LED, Incandescent, socket-mount LED,

or strobe

or strobe

LED

Lens Colors

Green, red, amber, blue, yellow, Green, red, amber, blue, yellow, Green, red, amber, blue, yellow, Green, red, amber, blue, yellow,

clear

clear

clear

clear

Pole-Mount Base Options

Surface, 10 cm metric tube, and 25 cm metric tube

10, 25, 40, 60, and 80 cm bases

10, 25, 40, 60, and 80 cm ­ aluminium or stainless steel bases



Other Base Mounting Options

Vertical bracket, conduit adapter, and quick-release base

Surface-mount bases (surfacemount bases also feature 1/2 NPT,
PG16, and M20 threading options),
vertical-mount bases, and quickrelease bases

Surface-mount bases (surfacemount bases also feature 1/2 NPT, PG16, and M20 threading options)
vertical-mount bases, and quick-release bases

Can be mounted in any orientation

Housing Colors Black or grey base housing

Black or grey base housing

Black or grey base housing

Grey or chrome cover housing

Sound Options

Piezo-style sound modules in single and two tone

Piezo-style sound modules in single and two tone

Transducer-style or Piezo-style sound modules available in single or two tone (sound modules are
UL Type 12, IP54), Piezo styles and modules also available in 4/4X

Piezo-style sound module (continuous or pulsing)

Connectivity

Standard connectivity

Standard connectivity

Standard or DeviceNet connectivity

Standard connectivity

Voltage Options

Bases available in: 24V AC/DC, 120V AC, 240V AC as standard
offerings

All modules available in: 12V AC/DC, 24V AC/DC, 120V AC, 240V AC as standard offerings

All modules available in: 12V AC/DC, 24V AC/DC, 120V AC, 240V AC as standard offerings

Base plate available in: 24V AC/DC, 120V AC, 240V AC as
standard offerings

Pole Connection Box



Surface, vertical, and magnetic mount

Surface, vertical, and magnetic mount



Standards

cULus Listed, CE

cULus Listed and CE on all components

cULus Listed and CE on all components

cULus Listed, CE

Operating Temperature

-25...+50 °C (-13...+122 °F)

-25...+50 °C (-13...+122 °F)

-25...+70 °C (-13...+158 °F)

-25...+50 °C (-13...+122 °F)

Material

Polycarbonate - bases, cap, lens cover, sound module housing, lens, & lamp socket

Polycarbonate (no sound module) - bases, cap, lens cover, lens, &
lamp socket

Polycarbonate - bases, cap, lens cover, sound module housing, lens, & lamp socket

Polycarbonate - base and lenses ABS - cover

Product Selection

Page 11-35

Page 11-39

Page 11-45

Page 11-61

11

12

13
11-34

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855D
30 mm Compact Control TowerTM Stack Lights
Product Selection

Bulletin 855D -- 30 mm Compact Control TowerTM Lights

Table of Contents

UL Type 4/4X/13, IP65 Steady and flashing LED light modules

0 Product Selection ...... this page

Continuous or pulsing piezo sound modules

Accessories.................. 11-36

Mounting options include: surface mount, pole with foot, metric tube, Specifications.............. 11-37

and direct mount

Approximate

Dimensions................... 11-38

1

Standards Compliance

UL 508

CSA C22.2 No. 14

EN/IEC 60947-1

EN/IEC 60947-5-1

2

Certifications

cULus Listed (File No. E14840, Guides NKCR, NKCR7)

3

Pre-Assembled and Pre-wired Tower Lights, One to Five Modules

Level 5

4

Level 4

Level 3

Level 2

Level 1

5

Surface Mount

10...25 cm Pole Mount
with Foot

Threaded Tube for Direct Mount

10...25 cm Threaded Tube for Direct Mount

Vertical Mount to Cable using 855D-ABVM

Conduit Mount using 855D-ACMK

Vertical Mount to Conduit using 855D-ABVM

855D ­ P00

SC20 B 24 Y 3 Y 4 Y 5 L 7 P 1

a

b

c

de f g f g

(Level 1, f+g) (Level 2, f+g)

a

Base Type

Code

Description

P00

Surface mount

P10 10 cm aluminum pole mount with foot

P25 25 cm aluminum pole mount with foot

T00

0 cm M20 metric threaded tube for direct mount

T10

10 cm M20 metric threaded tube for direct mount

T25

25 cm M20 metric threaded tube for direct mount

Q10

10 cm quick release mount pole

Q25

25 cm quick release mount pole

Code Blank

b
Network Option Description
No network option

Code SC20
Blank

c
Cable Connector and Length® Description
Stranded cable, 2 m, yellow jacket No cable
(only for Q10 or Q25 base types)

Code B G

d
Housing Color Description Black Grey

Code 24 10 20

e
Voltage Description 24V AC/DC 120V AC 240V AC

 Sound module types (C, P, Q) must be on the top-most level, they must be configured with Lens Color/Sound Code 1, and only one sound module is allowed per assembly.
§ Light module types (Y, L) can only be configured with Lens Color/Sound Codes 3, 4, 5, 6, 7, or 8.  If the dual circuit sound module (Q) is selected, the maximum number of light modules allowed is three
(two circuits are required for the dual circuit sound module). ® The SC20 cable must be ordered for all bases, except the Q10 and Q25 bases.

fgfgfg

(Level 3, f+g) (Level 4, f+g) (Level 5, f+g)

f

Code Y L C P Q

Module Type § Description Steady LED Flashing LED
Piezo sound alarm, continuous tone Piezo sound alarm, pulsing tone Dual-circuit Piezo sound alarm 

Code 1 3 4 5 6 7 8

g
Lens Color/Sound Description
Sound module Green Red Amber Blue Clear Yellow

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

11-35

6 7 8 9 10 11 12 13

Bulletin 855D
30 mm Compact Control TowerTM Stack Lights
Accessories

0

M20

Description

Gaskets

Ø 8.5

Vertical Mount Kit

1

includes the following: L-bracket

1/2 in. NPT

thread adapter

black cable gland (1/2 in. NPT)

plastic washer

2

M20

3

Conduit Mount Kit

M20 to 1/2 in. NPT thread adapter

1/2 in. NPT

4

Direct Mount Kit

includes the following:

M20 nut

5

plastic washer metal lock washer

Base Foot Gasket (Bag of 5)
6
Mounting Screw Washer Kit Replacement flat washers are used to provide a seal where the mounting screw meets the pole base. (1 kit includes 20 pieces)
7

Cat. No. 855D-ABVM
855D-ACMK 855D-ARDM 855D-APFG 855T-AMSG

8 9 10 11

Field-installable 4-pin DC Micro style terminal chamber. For additional chamber style terminals see the On-Machine Connectivity Catalog.

Description Locking ring for quick release base
Locking ring for quick release base

Black Grey

Color

Gasket for quick release base (order quantity of 1 and receive bag of 5 gaskets)

871A-TS4-DM Cat. No.
855D-ABQLR 855D-AGQLR
855D-AQG

12

Mounting base with gasket

855D-AQMB

13
11-36

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855D
30 mm Compact Control TowerTM Stack Lights
Specifications

Specifications

Shock and Vibration Standard Bases

Surface Mount Base or 10/25 cm Aluminum Pole Base

Ingress Ratings
Temperature Ratings -- All Products

Light Modules Sound Modules Surface, Pole, Vertical, Tube Mount Bases Operating Temperature Storage Temperature

Bases, Caps, Lens Covers, Sound Module Housings Rubber Seals and Gaskets Pole (for aluminum pole assembly) Pole Base Footing (for aluminum pole base) Insulation Sleeve (for pole insulation) Mounting Screw Washers

Mechanical Ratings

Based on the weight and style of mounting; tower lights are subject to damage from shock and vibration. Listed below are reference guidelines for maximum acceptable conditions.

1 Module Stack

3 Module Stack

5 Module Stack

150 G Shock 2.5 G Vibration

45 G Shock 2.5 G Vibration

35 G Shock 2.0 G Vibration

Environmental Ratings

IP65/UL Type 4/4X/13

IP65/UL Type 4/4X/13

IP65/UL Type 4/4X/13

Materials

-25...+50 °C (-13...+122 °F) -25...+85 °C (-13...+185 °F)
Polycarbonate Nitrile Rubber
Aluminum Polycarbonate
PVC Polyamide

Estimated Light Output

Steady, Flashing, Red Steady, Flashing, Amber Steady, Flashing, Green Steady, Flashing, Yellow Steady, Flashing, Blue Steady, Flashing, White

Light Modules Sound Modules

Description

LED Modules Sound Modules

Description

Performance Ratings
Operating Voltage 24V AC/DC

1000 mcd 800 mcd 1500 mcd 700 mcd 250 mcd 1000 mcd
120V AC

24V AC/DC (± 10%)

110V AC 50 Hz (± 10%) 120V AC 60 Hz (± 10%)

Lamp Life Ratings (Design Life) Average Life Under Static, No Vibration, Conditions

24V AC/DC

120V AC 100 000 hrs 20 000 hrs

240V AC 230V AC 50 Hz (± 10%) 240V AC 60 Hz (± 10%)
240V AC

 Light Output values are calculated from the LED datasheet and show typical values of luminous density. These values are not exact because the knurling in the lens affects the light distribution and because the viewing angle of the LED which directly relates to the Cd output value, is not identical for all LEDs.

Current Consumption

Description

24V AC/DC

120V AC

240V AC

Light Modules

Steady or Flashing LED

20 mA

22 mA

21 mA

Piezo Style Sound Modules

Single and Dual Circuit

40 mA

22 mA

21 mA

Flashing Frequency (Light Only Modules)

Flashing LED Modules

Flashing frequency approximately 2 Hz

dB Rating (Sound Modules)

All dB(A) ratings determined at a distance of 1 meter from sound module

Piezo Sound Module

85 dB(A) (+2 dB/-5 dB)

Leakage Current Impact

All light and sound modules are capable of absorbing up to 3 mA of leakage current from solid-state outputs without module activation.

0 1 2 3 4 5 6 7 8 9 10 11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-37

Bulletin 855D
30 mm Compact Control TowerTM Stack Lights
Approximate Dimensions
Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.
0 Pre-assembled Tower Lights

1

2

30

30

(1.2)

(1.2)

192 (7.6)

199 (7.8)

237 (9.3)

244 (9.6)

55 (2.2)

63 (2.5)

146

154

(5.7)

(6.1)

3

100 (3.9)

108 (4.3)

4

5

130

130

130

152

(5.1)

(5.1)

(5.1)

(6.0)

130 (5.1)

130 (5.1)

130 (5.1)

6

26 (1.0) 100 - 250
(3.9 - 9.8)

100 - 250 (3.9 - 9.8)

100 - 250 (3.9 - 9.8)

100 - 250 (3.9 - 9.8)

100 - 250 (3.9 - 9.8)

7

26 (1.0)

16 (0.6)

24 (0.9)

Ø 5 (0.2)

Ø 20 - 22 (0.8 - 0.9)

30

70

(1.2)

(2.8)

35

Ø 44 (1.7)
8

Ø 5 (0.2)

Ø 20 - 22 (0.8 - 0.9)

(1.4)

Surface Mount

Ø 44 (1.7)

Threaded Tube for
Direct Mount

10-25 cm Threaded Tube
for

Vertical Mount to Cable using 855D-ABVM

1/2 inch NPT Conduit Mount
using

Vertical Mount to 1/2 inch NPT Conduit
using 855D-ABVM

10-25 cm

Direct Mount

855D-ACMK

Pole Mount

9

with Foot

10

11

12

13
11-38

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Light Modules

Bulletin 855E
50 mm Control TowerTM Stack Lights
Product Overview/Product Selection

Bulletin 855E 50 mm Control TowerTM Lights UL Type 4/4X/13, IP65 Stacking configurations 1...5 modules high "No Tools" lens assembly Surface, vertical, quick release, or pole mounting Top-mounted terminal blocks on all bases

Standards Compliance
UL 508 CSA C22.2 No. 14 EN/IEC 60947-1 EN/IEC 60947-5-1

Certifications
cULus Listed (File No. E14840, Guides NKCR, NKCR7) CE Marked

Table of Contents

0 Light Modules ............. this page

Sound Modules .......... 11-40

Bases.............................. 11-41

Pre-Configured

Tower Lights ................ 11-42

1

Accessories.................. 11-53

Specifications.............. 11-43

Approx. Dimensions . 11-44

2

3

855E ­ 10 FN 4

a

b

c

4

Flashing Incandescent

Code 00 12 24 10 20

a
Voltage Description
0...250V AC/DC (no-lamp module1) 12V AC/DC 24V AC/DC 120V AC 240V AC

Code XN DN FN TL GL BR

b
Light Module Type Description
Steady no lamp1 Steady incandescent Flashing incandescent Steady socket - mount LED Flashing socket - mount LED
Strobe

Code 3 4 5 6 7 8

1 Can only be selected with module type XN, voltage code 00. Accepts socket mount LED and incandescent lamp types.

c
Lens Color Description Green Red Amber Blue Clear Yellow

Voltage 0...250V No-Lamp Module
24V AC/DC
120V AC

Color Green Red Green
Red
Amber
Green
Red
Amber

Illumination Type
Steady Incandescent/LED
Steady Incandescent Flashing Incandescent
Steady LED Steady Incandescent Flashing Incandescent
Strobe Steady Incandescent Flashing Incandescent
Steady LED Steady Incandescent Flashing Incandescent
Steady LED Steady Incandescent Flashing Incandescent
Strobe Steady Incandescent Flashing Incandescent
Steady LED

Cat. No. 855E-00XN3 855E-00XN4 855E-24DN3 855E-24FN3 855E-24TL3 855E-24DN4 855E-24FN4 855E-24BR4 855E-24DN5 855E-24FN5 855E-24TL5 855E-10DN3 855E-10FN3 855E-10TL3 855E-10DN4 855E-10FN4 855E-10BR4 855E-10DN5 855E-10FN5 855E-10TL5

5 6 7 8 9 10 11 12 13

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

11-39

Bulletin 855E
50 mm Control TowerTM Stack Lights
Product Selection
Sound Modules
0 Sound modules have continuous and pulsing tones. Maximum sound output is 103 dB @ 1 meter. A reduced volume setting is available by changing the position of the volume dipswitch, producing a sound output of 88 dB @ 1 meter.

1 2 3 Code
B G
4 5 6 7

855E ­ B
a

10 TA3

b

c

a
Housing Color Description Black Grey
Voltage 24V AC/DC
120V AC

Code 12 24 10 20

b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC

Black Two-Tone Sound Module

c

Module Type

Code

Description

Single circuit/single tone piezo style SA3 (continuous or pulsing tones modified by
dip switch)

Two circuit/two tone piezo style

TA3

(continuous or pulsing tones modified by energizing one or two circuits of sound

module)

Housing Color Black Grey Black Grey

Module Type Single Circuit/Single Tone
Two Circuit/Two Tone Single Circuit/Single Tone
Two Circuit/Two Tone Single Circuit/Single Tone
Two Circuit/Two Tone Single Circuit/Single Tone
Two Circuit/Two Tone

Cat. No. 855E-B24SA3 855E-B24TA3 855E-G24SA3 855E-G24TA3 855E-B10SA3 855E-B10TA3 855E-G10SA3 855E-G10TA3

8

9

10

11

12

13
11-40

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Standard Stack Light Bases Bases

Bulletin 855E
50 mm Control TowerTM Stack Lights
Product Selection
0

1

2

3

Surface-Mount Base with Cap

Vertical-Mount Base with Cap

Pole-Mount Bases

Quick-Release Base

4
855E ­ B VM C

Code B G

a
Housing Color Description Black Grey

a

b

c

b

c

5

Base Type

Cap Option

Code

Description

Code

Description

CB Surface mount with 1/2 in. NPT threading RB Surface mount with M20 metric threading

Blank C

No cap Cap included

6

SB

Surface mount with PG16 threading

TM

25 mm tube mount

VM

Vertical mount

PM10

10 cm aluminum pole mount base

7

PM25

25 cm aluminum pole mount base

PM40

40 cm aluminum pole mount base

PM60

60 cm aluminum pole mount base

PM80 MM10

80 cm aluminum pole mount base 10 cm quick release base

8

MM25

25 cm quick release base

MM40

40 cm quick release base

 Quick-release bases always include a cap.

9

Housing Color Black

Base Type Surface Mount -- 1/2 NPT Thread
Surface Mount -- PG16 Thread Surface Mount -- M20 Thread
Vertical Mount 25 mm Diameter Tube Mount 10 cm Aluminum Pole Mount 25 cm Aluminum Pole Mount 40 cm Aluminum Pole Mount 60 cm Aluminum Pole Mount 80 cm Aluminum Pole Mount 10 cm Pole, Quick-Release Base 25 cm Pole, Quick-Release Base 40 cm Pole, Quick-Release Base

With Cap Option Cat. No.
855E-BCBC 855E-BSBC 855E-BRBC 855E-BVMC 855E-BTMC 855E-BPM10C 855E-BPM25C 855E-BPM40C 855E-BPM60C 855E-BPM80C 855E-BMM10C 855E-BMM25C 855E-BMM40C

Without Cap Option Cat. No. 855E-BCB 855E-BSB 855E-BRB 855E-BVM
855E-BTM 855E-BPM10 855E-BPM25 855E-BPM40 855E-BPM60 855E-BPM80
  

10 11 12 13

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

11-41

Bulletin 855E
50 mm Control TowerTM Stack Lights
Product Selection Pre-configured Tower Lights, One to Five Modules
0
1
2

Level 5 Level 4 Level 3 Level 2 Level 1

3

Surface Mount

Vertical Mount

10 cm Pole Mount

25 cm Pole Mount

4

855 EC ­ B 10

a

b

c

5 a

Base Type

Code

Description

6

EC Surface mount - 1/2 in. NPT threading

ES

Surface mount - PG16

EV

Vertical mount

EM

25 mm tube mount

EP
7 EE

10 cm pole mount 25 cm pole mount

8 Code B G

b
Base & Cap Color Description Black Grey

9

Y3

d

e

(Level 1) d+e

L5

d

e

(Level 2) d+e

B3

d

e

(Level 3) d+e

F7

d

e

(Level 4) d+e

Y6

d

e

(Level 5) d+e

Code 12 24 10 20
Code D F Y L B P Q

c
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC
d
Module Type Description
Steady incandescent Flashing incandescent
Steady LED Flashing LED
Strobe Single-circuit piezo sound module Two-circuit piezo sound module

Code 1 3 4 5 6 7 8

e
Lens Color Description
Sound module Green Red Amber Blue Clear Yellow

Sound module option can only be selected with Module Type options P or Q in table e. They must be located in the top position of the stack.  If the two-circuit sound module (option Q in Table d) is selected, the maximum number of light modules allowed is three.

10

11

12

13
11-42

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855E
50 mm Control TowerTM Stack Lights
Specifications

Shock and Vibration

Standard Bases

Surface Mount Base or 10 cm Aluminum Pole Base
Vertical Base or 25 cm Aluminum Pole Base

Recommended Wire Sizes

Recommended Terminal Torque

Ingress Ratings
Temperature Ratings -- All Products

Light Modules with Cap Sound Modules Surface, Vertical, Tube Mount Bases Pole Mount Bases Operating Temperature Storage Temperature

Bases, Caps, Lens Covers, Sound Module Housings, Lenses Lamp Socket Rubber Seals and Gaskets Pole (for aluminum pole assembly) Pole Base Footing (for aluminum pole base) Insulation Sleeve (for pole insulation) Mounting Screw Washers

Mechanical Ratings

Based on the weight and style of mounting; tower lights are subject to damage from shock and vibration. Listed below are reference guidelines for maximum acceptable conditions.

1 Module Stack

3 Module Stack

5 Module Stack

150 G Shock 5 G Vibration

45 G Shock 1.5 G Vibration

35 G Shock 0.75 G Vibration

95 G Shock 3.5 G Vibration

30 G Shock 1.25 G Vibration

20 G Shock 0.5 G Vibration

0.5...1.5 mm2 (22...16 AWG)

0.87 N·m (7 lb·in)

Environmental Ratings

UL Type 4/4X/13, IP65

UL Type 4/4X/13, IP65

UL Type 4/4X/13, IP65

UL Type 4/4X/13, IP65

-25...+50 °C (-13...+122 °F)

-40...+85 °C (-40...+185 °F)

Materials

Polycarbonate

Polycarbonate

Nitrile Rubber

Aluminum

Polycarbonate

Polyolefin

Polypropylene

Performance Ratings

Description

12V AC/DC

24V AC/DC

120V AC

240V AC

Steady Incandescent

0.5 MSCP 6.3 Lumens

2.5 MSCP 31.4 Lumens

3.0 MSCP 37.7 Lumens

0.49 MSCP 6.2 Lumens

Flashing Incandescent

0.5 MSCP 6.3 Lumens

2.5 MSCP 31.4 Lumens

3.0 MSCP 37.7 Lumens

0.49 MSCP 6.2 Lumens

Light Output

Strobe Steady, Flashing Socket Mount LED Red Steady, Flashing Socket Mount LED Green

1 Joule per lamp 900...2240 mcd 900...1800 mcd

Steady, Flashing Socket Mount LED Amber

1400...3550 mcd

Steady, Flashing Socket Mount LED Blue

224...560 mcd

Steady, Flashing Socket Mount LED White and Yellow

900...1800 mcd

Operating Voltage

Description

12V AC/DC

24V AC/DC

120V AC

240V AC

Light Modules and Sound Modules

12V AC/DC (± 10%)

24V AC/DC (± 10%)

110V AC 50Hz (± 10%) 230V AC 50 Hz (± 10%) 120V AC 60Hz (± 10%) 240V AC 60 Hz (± 10%)

Lamp Life Ratings (Design Life) Average Life Under Static, No Vibration, Conditions

Description

12V AC/DC

24V AC/DC

120V AC

240V AC

Incandescent Modules 

8 000 hrs

7 000 hrs

3 000 hrs

1 600 hrs

LED Modules

100 000 hrs

Strobe Modules

15 000 hrs

Sound Modules

20 000 hrs

First failures at about 35% of average life. Severe vibration may reduce life to 44% of average life.  Flashing applications may reduce life to 50% of average life.

0 1 2 3 4 5 6 7 8 9 10 11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-43

Bulletin 855E
50 mm Control TowerTM Stack Lights
Specifications/Approximate Dimensions

Current Consumption

0

Description Steady Incandescent

12V AC/DC 208 mA

24V AC/DC 271 mA

120V AC 58 mA

240V AC 23 mA

Light Only Flashing Incandescent Modules Steady or Flashing LED

208 mA 42 mA

271 mA 29 mA

58 mA 21 mA

23 mA 20 mA

Strobe

1 Sound

Single-Tone Sound Module

Modules Two-Tone Sound Module

95 mA 12 mA

60 mA 25 mA

55 mA 33 mA

30 mA 33 mA

Flashing Frequency (Light Only Modules)

2

Flashing Incandescent Modules

12V module approximately 1.5 Hz 24V, 120V, and 240V modules approximately 2 Hz
Time ON/Time OFF = 1:1

Flashing LED Modules

Flashing frequency approximately 1.5 Hz Time On/Time OFF = 1:1

Strobe Modules

Flashing frequency appoxrimately 2 Hz (flash duration 1/50,000 secound)

3 Tone Frequency

Flashing and Tone frequency (Light Modules/with Sound Set at Continuous Tone) Tone frequency is preset at 2800 Hz

Flashing and Tone Pulsing Frequencies (Light Modules/with Sound Set at Pulsing Tone)

Tone Frequency

Tone Frequency is preset at 2800 Hz

dB Rating (Sound Modules)

4

All dB(A) ratings determined at a distance of 1 meter from sound module

Single Tone Sound Module (SA3) Two Tone Sound Module (TA3)

Maximum volume ranges from 88 or 103 dB(A) (volume adjustable by dipswitch)

Leakage Current Impact

5

All light modules and sound modules are capable of absorbing up to 3 mA of leakage from solid-state outputs without module activation

Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing puroses.

6

50.0 (1.9)

50 (1.9)

67.7

7

(2.7)

Lens Cap

14.5 (1.57)

50.0

8

52.0

(1.9)

(2.0)

Light Modules

51

9

(2.0)

73.5 (2.9)
Vertical Mount Base

74.3

10

(2.9)

Sound Module
11

28 (1.1)
50 (1.9)
Surface Mount Base

630.5 (25)

830.6 (33)

12 13
11-44

430.5 (17)

190

(7.5)

280.5

(11) 131

(5.2)

Quick Release Base

Pole Mount Bases

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855T
70 mm Control TowerTM Stack Lights
Product Overview/Product Selection

Product Selection Light Modules

Bulletin 855T -- 70 mm Control TowerTM Stack Lights

Surface, vertical, quick release, or pole mounting options Light modules - UL Type 4/4X/13, IP65 Sound modules - piezo and transducer options DeviceNet bases available

Standards Compliance
UL 508 CSA C22.2 No. 14 EN/IEC 60947-1 EN/IEC 60947-5-1

Certifications
cULus Listed (File No. E14840, Guides NKCR, NKCR7) CE Marked

Table of Contents
Light Modules ............. this page Combined Light Module with Sounder......................... 11-46 Sound Modules .......... 11-47 Stack Light Bases ..... 11-48 Pre-Assembled Stacks ............................ 11-50 Accessories.................. 11-53 Specifications.............. 11-54 Approximate Dimensions................... 11-58

855T ­ B 10 FN 4

a

b

c

d

Code B G

a
Housing Color Description Black Grey

Code
00
12 24 10 20

b
Voltage Description
0...250V AC/DC (Use only with Module Code XN) 12V AC/DC 24V AC/DC 120V AC 240V AC

c

Module Type

Code

Description

XN

Steady no-lamp

DN

Steady incandescent

FN

Flashing incandescent

TL

Steady LED

GL

Flashing LED

RL Rotating LED, simulated with fixed LEDs

BR

Strobe

Use only with Voltage Code 00. Accepts LED module or incandescent lamp.  Only available with Voltage Codes 10 or 24, and Color Codes 3, 4, or 5.

Red Flashing Incandescent (Black Housing)

Code 3 4 5 6 7 8

d
Light Color Description Green Red Amber Blue Clear Yellow

Voltage 0...250V No-Lamp Module

Color Green Red
Green

24V AC/DC

Red

Amber

Green

120V AC

Red

Amber 1 Refer to configurator options for additional selections.

Illumination Type
Steady Incandescent/LED
Steady Incandescent Flashing Incandescent
Steady LED Steady Incandescent Flashing Incandescent
Strobe Steady Incandescent Flashing Incandescent
Steady LED Steady Incandescent Flashing Incandescent
Steady LED Steady Incandescent Flashing Incandescent
Strobe Steady Incandescent Flashing Incandescent
Steady LED

Black Housing Color Cat. No.1
855T-B00XN3 855T-B00XN4 855T-B24DN3 855T-B24FN3 855T-B24TL3 855T-B24DN4 855T-B24FN4 855T-B24BR4 855T-B24DN5 855T-B24FN5 855T-B24TL5 855T-B10DN3 855T-B10FN3 855T-B10TL3 855T-B10DN4 855T-B10FN4 855T-B10BR4 855T-B10DN5 855T-B10FN5 855T-B10TL5

Grey Housing Color Cat. No.1
855T-G00XN3 855T-G00XN4 855T-G24DN3 855T-G24FN3 855T-G24TL3 855T-G24DN4 855T-G24FN4 855T-G24BR4 855T-G24DN5 855T-G24FN5 855T-G24TL5 855T-G10DN3 855T-G10FN3 855T-G10TL3 855T-G10DN4 855T-G10FN4 855T-G10BR4 855T-G10DN5 855T-G10FN5 855T-G10TL5

0 1 2 3 4 5 6 7 8 9 10 11 12 13

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

11-45

Bulletin 855T
70 mm Control TowerTM Stack Lights
Product Selection
Single-Circuit Combined Light Module with Piezo
0 Sounder1 All modules contain a selected light option with a sound device that operates simultaneously. The Piezo-style sound module can be switched to pulsing or continuous sound with a DIP switch. Additionally, the volume can be adjusted to either low: 92 dB(A) or
1 high: 107 dB(A), via a DIP switch. UL Type 4/4X/13, IP65.

Two-Circuit Combined Light Module with Piezo Sounder
All modules contain two circuits enabling separate operation of light or sound. The Piezo style sounder can be switched to pulsing or continuous, with a DIP switch. Additionally, the volume can be adjusted to either low: 92 dB(A) or high: 107 dB(A), via a DIP switch. UL Type 4/4X/13, IP65.

855T ­ B 10 DC 3

2

a

b

c

d

Combination Module

3 4 5 6 7 8 9 10 11 12

Code B G
Code 12 24 10 20

a
Housing Color Description Black Grey
b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC

Code DC
DD
FC TC GC BC

c
Combined Module Type Description
Steady incandescent with sound Two-circuit steady incandescent with
sound Flashing incandescent with sound
Steady LED with sound Flashing LED with sound
Strobe with sound

Code 3 4 5 6 7 8

d
Lens Color Description Green Red Amber Blue Clear Yellow

Voltage 24V AC/DC
120V AC 24V AC/DC
120V AC

Illumination Type Steady Incandescent
Steady LED Steady Incandescent
Strobe Steady Incandescent
Steady LED Steady Incandescent
Steady LED Steady Incandescent
Strobe Steady Incandescent
Steady LED
Steady Incandescent

Lamp Color Green
Red
Amber
Green
Red
Amber Green Red Amber Green Red Amber

Black Housing Color Cat. No.
855T-B24DC3 855T-B24TC3 855T-B24DC4 855T-B24BC4 855T-B24DC5 855T-B24TC5 855T-B10DC3 855T-B10TC3 855T-B10DC4 855T-B10BC4 855T-B10DC5 855T-B10TC5 855T-B24DD3 855T-B24DD4 855T-B24DD5 855T-B10DD3 855T-B10DD4 855T-B10DD5

Grey Housing Color Cat. No.
855T-G24DC3 855T-G24TC3 855T-G24DC4 855T-G24BC4 855T-G24DC5 855T-G24TC5 855T-G10DC3 855T-G10TC3 855T-G10DC4 855T-G10BC4 855T-G10DC5 855T-G10TC5 855T-G24DD3 855T-G24DD4 855T-G24DD5 855T-G10DD3 855T-G10DD4 855T-G10DD5

1 The single-circuit combined light/with sound module uses one circuit in a stack. It can be used with a maximum of four light modules and must be placed in the top position of a stack.
Refer to configurator options for additional selections.  The two-circuit combined light/with sound module uses two circuits in a stack. It can be used with a maximum of three light modules and must be placed in
the top position of a stack.

13
11-46

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855T
70 mm Control TowerTM Stack Lights
Product Selection

Transducer-Style Sound Modules

UL Type 12, IP54 Up to 15 tones

Adjustable volume @ from 85...103 dB @ 1 meter Adjustable frequency and speed tone

0

Code B G

855T ­ B
a

10 SA1

b

c

a
Housing Color Description Black Grey

Code 12 24 10 20

b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC

1
Sound Module

c
Module Type

2

Code

Description

SA1

Single-tone sound module with 13 different tones1

TA1

Dual-tone sound module with 15 sets of dual-tone combinations

3

Voltage

Module Type

Tone

Black Housing Color

Grey Housing Color

Cat. No.

Cat. No.

4

Single Tone Transducer Style

Preset as Triangle Tone

855T-B24SA1

855T-G24SA1

24V AC/DC

Dual Tone Transducer Style
Single Tone Transducer Style

Preset as Triangle Tone/Continuous
Tone
Preset as Triangle Tone

855T-B24TA1 855T-B10SA1

855T-G24TA1
5
855T-G10SA1

120V AC

Dual Tone Transducer Style

Preset as Triangle Tone/Continuous
Tone

855T-B10TA1

855T-G10TA1
6

1 This module uses one circuit in a stack. It can be used with maximum of any four light modules and must be placed on top of stack.

This module uses two circuits in a stack. It can be used with a maximum of any three light modules and must be placed on top of stack.

 Refer to configurator options for additional selections.

Piezo-Style Sound Modules

7

Single or dual circuit versions

High/low volume selectable via DIP switch

Code B G
Code 12 24 10 20

a
Housing Color Description Black Grey
b
Voltage Description 12V AC/DC 24V AC/DC 120V AC 240V AC

855T ­ G
a

24 TA2

b

c

c

Module Type

Code

Description

· Single-tone/single-circuit piezo-style module with continuous or pulsing tones modified by a

SA2

DIP switch · Type 12

· Volume 97 or 85 dB @ 1 m

· Dual-tone/dual-circuit piezo-style module with continuous or pulsing tone modified by

TA2

energizing one or two circuits of sound modules · Type 12

· Volume 97 or 85 dB @ 1 m

· Single-circuit piezo-style module with continuous or pulsing tones modified by a DIP switch SA3 · Type 4/4X/13
· Volume 107 or 92 dB @ 1 m

· Dual-circuit piezo-style module with continuous or pulsing tone modified by energizing one or

TA3

two circuits of sound modules · Type 4/4X/13

· Volume 107 or 92 dB @ 1 m

8 9 10 11 12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-47

Bulletin 855T
70 mm Control TowerTM Stack Lights
Product Selection

0

Voltage

Module Type

Tone Pattern

Dual Circuit Piezo Sounder

(Type 4/4X/13, IP65)

24V AC/DC

Single Circuit Piezo

Pulsing or Continuous Tone

Sounder

1

(UL Type 4/4X/13, IP65) Dual Circuit Piezo Sounder

(Type 4/4X/13, IP65)

120V AC

Single Circuit Piezo

Pulsing or Continuous Tone

Sounder

(UL Type 4/4X/13, IP65)
2 1 Refer to configurator options for additional selections.

Black Housing Color Cat. No.1
855T-B24TA3
855T-B24SA3
855T-B10TA3
855T-B10SA3

Standard and DeviceNet Stack Light Bases
3

Grey Housing Color Cat. No.1
855T-G24SA3
855T-G24SA3
855T-G10TA3
855T-G10SA3

4

5

Surface-Mount Base with Cap

Vertical-Mount Base with Cap

6

7

8

10 cm Aluminum

Pole-Mount Base

9

25 cm Quick Release Base

40 cm Powder-Coated Stainless Steel Pole-Mount Base

80 cm Powder-Coated Stainless Steel Pole-Mount Base with Cap

10

11

12

Surface-Mount, Conduit-Mount Base with Stranded Wire Cable

10 cm Pole-Mount Base with Micro-Connect Cable and Cap

Vertical-Mount Base with Micro-Connect Cable and Cap

13
11-48

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855T
70 mm Control TowerTM Stack Lights
Product Selection

855T ­ DL1 B PM10 C

a

b

c

d

0

Code Blank DM1 DS2 DL1
Code B G

a
Network Connection Type Description
No network connection DeviceNet micro-connect
with 1 m cable1 DeviceNet stranded wire connect
with 2 m cable1 DeviceNet mini-connect
with 1 m cable1
b
Housing Color Description Black Grey

c

Base Type

Code

Description

CB Surface mount -- 1/2 in. NPT conduit mount

SB

Surface mount -- PG16 conduit mount

RB Surface mount -- M20 x 1.5 conduit mount

VM

Vertical mount

TM

25 mm diameter tube mount

PM10

10 cm aluminum pole mount

PM25

25 cm aluminum pole mount

PM40

40 cm aluminum pole mount

SPM10

10 cm stainless steel pole mount

SPM25

25 cm stainless steel pole mount

SPM40

40 cm stainless steel pole mount

SPM60

60 cm stainless steel pole mount

SPM80

80 cm stainless steel pole mount

MM10

10 cm quick release base

MM25

25 cm quick release base

MM40

40 cm quick release base

Code Blank
C

d
Cap Option Description No cap Cap included

1 DeviceNet bases DL1, DM1, or DS2 can only be used with 24V AC/DC and they are only available with Base Types CB, SB, VM, TM, PM10, or PM25. Stainless Steel tube is powder-coated in black.

Standard Stack Light Bases

Housing Color Black

Base Type Surface Mount -- 1/2 in. NPT Conduit Mount Surface Mount -- PG16 Conduit Mount Surface Mount -- M20 x 1.5 Conduit Mount
Vertical Mount 10 cm Aluminum Pole Mount 25 cm Aluminum Pole Mount 40 cm Aluminum Pole Mount 25 mm Diameter Tube Mount 10 cm Stainless Steel Pole Mount 25 cm Stainless Steel Pole Mount 40 cm Stainless Steel Pole Mount 60 cm Stainless Steel Pole Mount 80 cm Stainless Steel Pole Mount 10 cm Pole, Quick-Release Base 25 cm Pole, Quick-Release Base 40 cm Pole, Quick-Release Base

 Quick release bases always include a cap.

With Cap Option Cat. No.1
855T-BCBC
855T-BSBC
855T-BRBC
855T-BVMC 855T-BPM10C 855T-BPM25C 855T-BPM40C
855T-BTMC 855T-BSPM10C 855T-BSPM25C 855T-BSPM40C 855T-BSPM60C 855T-BSPM80C 855T-BMM10C 855T-BMM25C 855T-BMM40C

Without Cap Option Cat. No.1
855T-BCB
855T-BSB
855T-BRB
855T-BVM 855T-BPM10 855T-BPM25 855T-BPM40
855T-BTM 855T-BSPM10 855T-BSPM25 855T-BSPM40 855T-BSPM60 855T-BSPM80
  

1 2 3 4 5 6 7 8 9 10 11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-49

Bulletin 855T
70 mm Control TowerTM Stack Lights
Product Selection

DeviceNet Stack Light Bases

0 Cable Type

1

Micro Connect (approx. 1 m cable length)

2
Stranded Wire (approx. 2 m cable length)

3

Mini Connect

(approximately 1 m cable

4

length)

Base Type Surface Mount -- 1/2 in. NPT Conduit Mount
Surface Mount -- PG16 Conduit Mount Vertical Mount
10 cm Pole Mount 25 cm Pole Mount 25 mm Diameter Tube Mount Surface Mount -- 1/2 in. NPT Conduit Mount Surface Mount -- PG16 Conduit Mount
Vertical Mount 10 cm Pole Mount 25 cm Pole Mount 25 mm Diameter Tube Mount Surface Mount -- 1/2 in. NPT Conduit Mount Surface Mount -- PG16 Conduit Mount
Vertical Mount 10 cm Pole Mount 25 cm Pole Mount 25 mm Diameter Tube Mount

Cap Option With Cap

1 See previous page for all configurator options. All DeviceNet bases can be purchased without cap. Remove the C from the end of the cat. no.
5 Pre-Configured Control Tower Lights, One to Five Modules

Black Housing Color Cat. No.1
855T-DM1BCBC 855T-DM1BSBC 855T-DM1BVMC 855T-DM1BPM10C 855T-DM1BPM25C 855T-DM1BTMC 855T-DS2BCBC 855T-DS2BSBC 855T-DS2BVMC 855T-DS2BPM10C 855T-DS2BPM25C 855T-DS2BTMC 855T-DL1BCBC 855T-DL1BSBC 855T-DL1BVMC 855T-DL1BPM10C 855T-DL1BPM25C 855T-DL1BTMC

Grey Housing Color Cat. No.1
855T-DM1GCBC 855T-DM1GSBC 855T-DM1GVMC 855T-DM1GPM10C 855T-DM1GPM25C 855T-DM1GTMC 855T-DS2GCBC 855T-DS2GSBC 855T-DS2GVMC 855T-DS2GPM10C 855T-DS2GPM25C 855T-DS2GTMC 855T-DL1GCBC 855T-DL1GSBC 855T-DL1GVMC 855T-DL1GPM10C 855T-DL1GPM25C 855T-DL1GTMC

Level 5

6

Level 4

Level 3

7

Level 2

Level 1

8

Surface Mount

Vertical Mount

10 cm Pole Mount

25 cm Pole Mount

9

10

11

12

13
11-50

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855T
70 mm Control TowerTM Stack Lights
Product Selection

855 TS ­ DL1 B 24 Y 4

a

b

c

d

e

f

(Level 1) e+f

L5

e

f

(Level 2) e+f

B3

e

f

(Level 3) e+f

F7

e

f

(Level 4) e+f

Y6

e

f0

(Level 5) e+f

a

d

f

1

Base Type

Voltage

Lens Color

Code

Description

Code

Description

Code

Description

TC

Surface mount 1/2 in. NPT conduit

12

TS

Surface mount PG16 conduit

24

TV

Vertical mount

10

TP

10 cm pole mount

20

12V AC/DC 24V AC/DC
120V AC 240V AC

1

Sound module

3

Green

2

4

Red

5

Amber

TE

25 cm pole mount

TM

25 mm diameter tube mount

b

Code

e
Module Type Description

6

Blue

7

Clear

8

Yellow

3

Network Options

D

Steady incandescent

Code

Description

F

Flashing incandescent

Blank

Standard

Y

Steady LED

4

DL1

DeviceNet mini-connect with 1 m cable1

L B

Flashing LED Strobe

DM1

DeviceNet micro-connect with 1 m cable1

T

Steady incandescent with sound

DS2

DeviceNet stranded wire connect with 2 m cable1

H

Flashing incandescent with sound

J

Dual-circuit steady incandescent with sound

5

c

E

Steady LED with sound

Housing Color

G

Flashing LED with sound

Code

Description

Z

Strobe with sound

6

B

Black

G

Grey

A

Transducer single-circuit sounder UL Type 12, IP54

W

Transducer dual-circuit sounder UL Type 12, IP54

P

Single-circuit piezo alarm

7

Q

Dual-circuit piezo alarm

1 DeviceNet bases DL1, DM1, or DS2 can only be used with 24V AC/DC.

Only one sound module or light module/with sound can be assembled per stack. These modules must always be placed in the top position.

 Sound module from Table f can only be selected with single-tone or two-tone module types from Table e.

8

9

10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-51

Bulletin 855T
70 mm Control TowerTM Stack Lights
Accessories

0 1 2 3 4 5 6 7 8 9 10

(BA15d Bayonet)  19 mm socket height

Incandescent Lamps 12V AC/DC 24V AC/DC

Description

120V AC

240V AC LED Lamps for Socket-Mounted Modules

12V AC/DC

24V AC/DC

120V AC

240V AC

Caps (top of stack)

The cap is installed to the top of the uppermost light module. No cap is needed if the top module is a sound module, or a light/with sound module.

For Use With 855E Only For Use With 855T Only

Module Securing Screws (Bag of 5) Gaskets
Lens O-Ring Seal Replacement rubber O-rings are to be installed between all bases, light, sound, and light/with sound modules. (Must order multiples of 5)

For Use With 855E Only For Use With 855E Only For Use With 855T Only

Color Red Green Amber Blue Yellow White1 Red Green Amber Blue Yellow White1 Red Green Amber Blue Yellow White1 Red Green Amber Blue Yellow White1 Color
Black
Grey

Cat. No.
855T-L12
855T-L24
855T-L10
855T-L20 Cat. No.
855E-LL12R 855E-LL12G 855E-LL12A 855E-LL12B 855E-LL12Y 855E-LL12W 855E-LL24R 855E-LL24G 855E-LL24A 855E-LL24B 855E-LL24Y 855E-LL24W 855E-LL10R 855E-LL10G 855E-LL10A 855E-LL10B 855E-LL10Y 855E-LL10W 855E-LL20R 855E-LL20G 855E-LL20A 855E-LL20B 855E-LL20Y 855E-LL20W
Cat. No.
855E-ABCAP
855E-AGCAP

Black

855T-ABCAP

Grey

855T-AGCAP 855E-ASC

855E-ALSG

855T-ALSG

11

Surface Mount Gasket Replacement flat gasket is to be placed between the mounting surface and the surface mount base. (Must order multiples of 5)

For Use With 855E Only SB, RB, & CB Bases
For Use With 855T Only BSB & BCB Bases

12 13

Pole Foot Gasket Replacement flat gasket is to be placed between the mounting surface and the pole base bottom foot. (Must order multiples of 5.) To be used with Cat. No. 855T-BPM10, 855T-BPM25, and 855TBPM40 pole bases.
1 White LED lamps are to be used with a lens option of Clear.

11-52

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

855E-ASFG 855T-ASFG 855T-APFG

Bulletin 855T
70 mm Control TowerTM Stack Lights
Accessories

Description

Cat. No.

Gaskets

0

Vertical Mount Gasket

Replacement flat gasket is to be placed between the mounting surface and the vertical mount base. (Must order

855T-AVFG

multiples of 5)

1

Tube Mount Gasket

Replacement O-ring gasket is to be placed in the tube mount pole opening before the tube is installed (BTM- and GTM-

855T-AVTG

type bases). (Must order multiples of 5)

2

Mounting Screw Washer Kit Replacement flat washers are used to provide a seal where the mounting screw meets the pole base. (1 kit includes 20 pieces) (Package quantity = 20)
Pole Connection Boxes1 Black surface mount with PG16 threaded side entrance Black surface mount with M20 threaded side entrance
Black surface mount with 1/2 in. NPT threaded side entrance
Black vertical mount with PG16 threaded side entrance
Black vertical mount with M20 threaded side entrance
Black magnetic mount with PG16 threaded side entrance Black magnetic mount with M20 threaded side entrance
Black magnetic mount with 1/2 in. NPT threaded side entrance
Hole Plugs Black PG16 threaded hole plug Black M20 threaded hole plug Glands Black PG16 threaded cable gland Black M20 threaded cable gland Black 1/2 in. NPT sealing connector Mounting Screws (M5 x 40 screws) for mounting Pole Mount Base to Pole Connection Box (Order quantity of 1 to receive bag of 4 screws)
Vertical Mount Kit Kit includes vertical bracket and set of three sealing washers. For use with 855E surface mount base.
Vertical Mount Kit Kit includes vertical bracket and set of three sealing washers. For use with 855T and 855E pole mount base and for use with 855T surface mount base.
1 For use with Bul. 855E and 855T pole mount bases, except for stainless steel and quick release base types.

855T-AMSG
855T-BSMP 855T-BSMR 855T-BSMN 855T-BVMP 855T-BVMR 855T-BMMP 855T-BMMR 855T-BMMN 855T-ABUP 855T-ABUR 855T-ABCP 855T-ABCR 855T-ABHN 855T-AJBS
855E-AVM
855T-AVM

3 4 5 6 7 8 9 10 11 12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-53

Bulletin 855T
70 mm Control TowerTM Stack Lights
Specifications

0 1 2 3 4 5 6 7 8 9 10 11 12 13

Shock and Vibration

Standard Bases

Surface Mount Base or 10 cm Aluminum Pole Base
Vertical Base or 25 cm Aluminum Pole Base

DeviceNet Bases

Surface Mount Base or 10 cm Aluminum Pole Base
Vertical Base or 25 cm Aluminum Pole Base

Recommended Wire Sizes

Recommended Terminal Torque

Ingress Ratings
Temperature Ratings -- All Products

Light Modules with Cap and combined Light/Sound Modules Sound Modules (SA1, SA2, TA1, TA2) Sound Modules (SA3, TA3) Surface, Vertical, Tube Mount and OnMachine Bases Pole Mount Bases (Aluminum) Pole Mount Bases (Stainless Steel) Operating Temperature Storage Temperature

Bases, Caps, Lens Covers, Sound Module Housings, Lenses, Lamp Sockets Rubber Seals and Gaskets Pole (for aluminum pole assembly) Pole Base Footing (for aluminum pole base) Pole (for stainless steel pole assembly) Pole Base Footing (for stainless steel pole base) Insulation Sleeve (for pole insulation) Surface and Vertical Mount Pole Connection Box and Magnetic Mount Housing Mounting Screw Washers DeviceNet Base Grommet DeviceNet Cable Jackets DeviceNet Cable Connectors

Mechanical Ratings

Based on the weight and style of mounting; tower lights are subject to damage from shock and vibration. Listed below are reference guidelines for maximum acceptable conditions.

1 Module Stack

3 Module Stack

5 Module Stack

150 G Shock 5 G Vibration

45 G Shock 1.5 G Vibration

35 G Shock 0.75 G Vibration

95 G Shock 3.5 G Vibration

30 G Shock 1.25 G Vibration

20 G Shock 0.5 G Vibration

50 G Shock 5 G Vibration

45 G Shock 1.5 G Vibration

35 G Shock 0.75 G Vibration

50 G Shock 3.5 G Vibration

30 G Shock 1.25 G Vibration

20 G Shock 0.5 G Vibration

0.5...2.5 mm2 (22...14 AWG)

0.8 N·m (7 lb·in)

Environmental Ratings

IP65/UL Type 4/4X/13

IP54/UL Type 12 IP65/UL Type 4/4X/13

IP65/UL Type 4/4X/13

Materials

IP65/UL Type 4/13 IP65/UL Type 4/4X/13 -25...+70 °C (-13...+158 °F) -40...+85 °C (-40...+185 °F)

Polycarbonate

Nitrile Rubber Aluminum
Polycarbonate Powder-coated Stainless Steel
Zinc Polyolefin

Polycarbonate

Polypropylene Neoprene
CPR Chlorinated Polyethylene Santoprene

Description Steady Incandescent

Light Output

Flashing Incandescent
Strobe Steady, Flashing Socket Mount LED Red Steady, Flashing Socket Mount LED Green Steady, Flashing Socket Mount LED Amber Steady, Flashing Socket Mount LED Blue Steady, Flashing Socket Mount LED White and Yellow

Description Light Modules and Sound Modules

Description Incandescent Modules  LED Modules Strobe Modules Sound Modules

Performance Ratings

12V AC/DC

24V AC/DC

120V AC

0.5 MSCP 6.3 Lumens

2.5 MSCP 31.4 Lumens

3.0 MSCP 37.7 Lumens

0.5 MSCP 6.3 Lumens

2.5 MSCP 31.4 Lumens

3.0 MSCP 37.7 Lumens

3 Joules per lamp

900...2240 mcd

900...1800 mcd

1400...3550 mcd

224...560 mcd

900...1800 mcd

Operating Voltage

12V AC/DC

24V AC/DC

120V AC

12V AC/DC (± 10%)

24V AC/DC (± 10%)

110V AC 50Hz (± 10%) 120V AC 60Hz (± 10%)

Lamp Life Ratings (Design Life) Average Life Under Static, No Vibration, Conditions

12V AC/DC

24V AC/DC

120V AC

8,000 hrs

7,000 hrs

3,000 hrs

100 000 hrs

15 000 hrs

20 000 hrs

240V AC 0.49 MSCP 6.2 Lumens 0.49 MSCP 6.2 Lumens
240V AC 230V AC 50 Hz (± 10%) 240V AC 60 Hz (± 10%)
240V AC 1,600 hrs

First failures at about 35% of average life. Severe vibration may reduce life to 44% of average life.  Flashing applications may reduce life to 50% of average life.

11-54

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855T
70 mm Control TowerTM Stack Lights
Specifications

Current Consumption

Description

12V AC/DC

24V AC/DC

120V AC

240V AC

Light Only Modules

Steady Incandescent Steady or Flashing LED
Strobe

208 mA 42 mA 240 mA

271 mA 29 mA 170 mA

58 mA 21 mA 50 mA

23 mA 20 mA 35 mA

Steady Incandescent/with Sound

218 mA

281 mA

78 mA

43 mA

Flashing Incandescent/with Sound

218 mA

281 mA

78 mA

43 mA

Light Steady or Flashing LED/with Sound

Modules/

(Red, Amber, Yellow)

with Sound Flashing Incandescent/with Sound

100 mA 65 mA

62 mA 35 mA

22.5 mA 22.5 mA

20 mA 20 mA

Steady or Flashing LED/with Sound (Green, Blue, White)

250 mA

180 mA

70 mA

55 mA

Transducer Style Sound
Modules

Single and Two Circuit Modules

30 mA

65 mA

110V/50 Hz 120V/60 Hz
60 mA

230V/50 Hz 240V/60 Hz
60 mA

Piezo Style Sound
Modules

Single and Two Circuit Modules

27 mA

45 mA

43 mA

40 mA

DeviceNet Bases

--

70 mA

--

--

Flashing Frequency (Light Only Modules)

Flashing Incandescent Modules

12V module approximately 1.5 Hz 24V, 120V, and 240V modules approximately 2 Hz
Time ON/Time OFF = 1:1

Flashing LED Modules

Flashing frequency approximately 1.5 Hz Time ON/Time OFF = 1:1

Strobe Modules

Flashing frequency approximately 2 Hz (flash duration 1/50,000 second)

Flashing and Tone Frequency (Light Modules/with Sound Set at Continuous Tone)

Tone Frequency

Tone frequency is preset at 2400 Hz or 3300 Hz

Flashing Incandescent/with Sound

12V module approximately 1.5 Hz 24V, 120V, and 240V modules approximately 1.6 Hz

Flashing LED/with Sound

Flashing frequency approximately 1.5 Hz

Strobe/with Sound

Flashing frequency approximately 1.4 Hz

Flashing and Tone Pulsing Frequencies (Light Modules/with Sound Set at Pulsing Tone)

Tone Frequency

Tone frequency is preset at 2400 Hz or 3300 Hz

Steady Incandescent/with Sound

Sound Pulsing Frequency -- 1.5 Hz

Flashing Incandescent/with Sound

Flashing and Pulsing Frequency the same for 12V module approximately 1.5 Hz,
for 24V, 120V, and 240V modules approximately 1.6 Hz

LED Steady/with Sound

Sound Pulsing Frequency -- 1.5 Hz

LED Flashing/with Sound

Flashing and Pulsing Frequency the same at 1.5 Hz

Strobe/with Sound

Flashing and Pulsing Frequency the same at 1.4 Hz

dB Rating (Sound Modules)

All dB(A) ratings determined at a distance of 1 meter from sound module

Selectable Tone Sound Module (SA1, TA1)

Maximum volume ranges from 64...103 dB(A) (volume adjustable) Based on tone selected for all settings except signal horn which has a maximum of 80 dB(A)

Piezo Sound Module (SA2, TA2)

High 97 dB/Low 85 dB, selectable via DIP switch

Piezo Sound Module (SA3, TA3)

High 107 dB/Low 95 dB, selectable via DIP switch

Piezo Light Modules and Light Modules/with Sound (set at continuous or pulsing tone)

High 107 dB/Low 95 dB, selectable via DIP switch

Leakage Current Impact

All light modules, sound modules, and light/sound modules are capable of absorbing up to 3 mA of leakage current from solid-state outputs without module activation. Some light and light modules with sound may not turn off completely when connected to solid-state outputs which emit leakage current. Listed below
are modules that were affected by an output module emitting a maximum of 3 mA. A dry contact can be used to eliminate the effect of leakage current.

12V AC/DC, 24V AC/DC, 120V AC, 240V AC

All light/sound combination modules

DeviceNet Bases

Baud Rate Options

125 K, 250 K, 500 K, Autobaud

0 1 2 3 4 5 6 7 8 9 10 11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-55

Bulletin 855T
70 mm Control TowerTM Stack Lights
Specifications

Transducer Style Single Circuit Sound Module (SA1)

0

DIP Switch Position

Tone Description

Triangle Tone

1
2
3 Adjustable Sound Settings
4
5 Volume Lower Upper Speed Freq. Freq.
6

Continuous Tone

Interrupted Tone

Changing Tone

Saw Tooth Tone Ascending
Saw Tooth Tone Descending

Sine Wave Tone

DIN-Emergency Signal

DIN 33404

Siren (NonRepeating)

Signal Horn Continuous Tone

Three-Tone Gong

Two-Tone Gong

7

Rotated View of Sound Settings

1 Set to maximum (+).

Gong

8

Speed 7...22 Hz
--
0.5... 1.5 Hz 0.5... 1.5 Hz 0.5... 1.5 Hz 0.5... 1.5 Hz 0.5... 1.5 Hz
1 Hz
2...4 s
--
2...4 s
2...3 s
1...3 s

Upper Frequency
1500 Hz

Lower Frequency
500 Hz

1
1
500... 1500 Hz
500... 1500 Hz
500... 1500 Hz
500... 1500 Hz
1200 Hz

500 Hz
500... 1500 Hz
500... 1500 Hz
500... 1500 Hz
500... 1500 Hz
500... 1500 Hz
500 Hz

1500 Hz

500 Hz

1

100... 350 Hz

660 Hz 550 Hz 440 Hz

550 Hz 440 Hz

500...

1

1500 Hz

Volume 80...
100 dB(A)
83... 100 dB(A)
83... 103 dB(A)
83... 103 dB(A)
83... 103 dB(A)
83... 103 dB(A)
82... 102 dB(A)
82... 102 dB(A)
83... 103 dB(A)
64... 80 dB(A)
76... 95 dB(A)
75... 93 dB(A)
75... 93 dB(A)

9

10

11

12

13
11-56

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855T
70 mm Control TowerTM Stack Lights
Specifications

Transducer Style Dual Circuit Sound Module (TA1)
DIP Switch Position

Tone A

Tone B

0

Triangle Tone

Continuous Tone

Continuous Tone

Changing Tone

1

Continuous Tone Interrupted Tone

Interrupted Tone

Three-Tone Gong

2

Interrupted Tone Changing Tone

Siren (Non-Repeating) DIN-Emergency Signal

3
DIN 33404

Adjustable Sound Settings

Saw Tooth Tone Ascending

Continuous Tone

4

Saw Tooth Tone Descending

Interrupted Tone

Sine Wave Tone DIN-Emergency Signal

DIN 33404

DIN-Emergency Signal Three-Tone Gong

DIN 33404
5

Volume Lower Upper Speed Freq. Freq.

Siren (Non-Repeating)

Triangle Tone

6

Signal Horn (Continuous Tone)

Continuous Tone

Rotated View of Sound Settings

Three-Tone Gong Two-Tone Gong
Gong

Sine Wave Tone

7

Two-Tone Gong (Non-Repeating)

Continuous Tone

8

9

10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-57

Bulletin 855T
70 mm Control TowerTM Stack Lights
Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

0 Assembled Control Tower Lights -- Light Modules Only or Light Modules with Sound Module located on top position1

Surface Mount Base (SB and CB)

Tube Mount Base (TM)

1

2

3
Vertical Mount Base (VM)
4

10 cm Pole Mount Base (PM10, SPM25)

5

6
25 cm Pole Mount Base (PM25, SPM25)
7

40 cm Pole Mount Base (PM40, SPM40)

8

9

10 60 cm Pole Mount Base (SPM60) 11

80 cm Pole Mount Base (SPM80)

12

1 If a combined Light/Sound module is used, add 21.5 mm (0.8 in.) to vertical dimensions.

13
11-58

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855T
70 mm Control TowerTM Stack Lights
Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

Component and Accessory Dimensions Light Module

Combined Light/Sound Module

0
Transducer Style Sound Module

1

2

SA3 Sounder

TA3 Sounder

Cap Vertical Mount Base

3

Pole Mount Base Aluminum or Stainless Steel

A4 5

B

6

D

C

7

E

Pole Mount Base Size [cm] (aluminum or stainless steel)
10
25
40
60
80

Dimension A
124.5 (4.9) 274.5 (10.8) 424.5 (16.7) 624.5 (24.6) 824.5 (32.5)

Dimension B
54.0 (2.1)

Dimension C
54.0 (2.1)

Dimension Dimension

D

E

70.0 (2.8) 5.0 (0.2)

Surface Mount Base 855T-BSB or 855T-BCB

8 9 10

11

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

PG16 Conduit or 1/2 in. NPT Conduit Thread

12 13

11-59

Bulletin 855T
70 mm Control TowerTM Stack Lights
Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

0

855E-AVM Vertical Mount Bracket

35 [ 1.38 ]

Standard Pole Connection Box

1

24 [ .94 ]

14 [ .55 ]

2

3
35 [ 1.38 ]
4

50 [ 1.97 ]

Ø5.5 [ .22 ] X 2 42 [ 1.65 ]
Ø14 [ .55 ]

Ø5 [ .20 ] X 2

5
6 14 [ .55 ] 24 [ .94 ]
7
8
45 [ 1.77 ]
9
10
11

30 [ 1.18 ]
855T-AVM Vertical Mount Bracket
48 [ 1.89 ]

Ø5.5 [ .22 ] X 2

70 [ 2.76 ]

42 [ 1.65 ] Ø16 [ .63 ]

Ø5 [ .20 ] X 2
Ø5.5 [ .22 ] X 4 FOR POLE FOOT MOUNTING
Pole Mount Gasket

60 [ 2.36 ] 80 [ 3.15 ]

Magnetic Pole Connection Box Surface Mount Gasket
Vertical Mount Gasket

12

13
11-60

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855W
Wall Mount Signal Light
Product Overview/Catalog Number Explanation

Bulletin 855W -- Wall Mount Signal Light

Table of Contents

UL Type 4/4X/13, IP65 Configurations from 2...5 light levels, available with or without sound Product Selection ...... this page

0

Steady and flashing LED light modules, 24V AC/DC, 110/120V AC,

Specifications.............. 11-63

and 230/240V AC

Approximate

User-selectable, continuous, or pulsing piezo sound modules

Dimensions................... 11-63

Six light colors to choose from

1

Two housing colors (grey, chrome), available to match application

needs

Can be mounted in any orientation

2

Pre-Assembled Wall Mount Signal Lights, Two to Five Light Levels
3

Level 5

4

Level 4

Level 3

Level 2 Level 1

5

855W

­G

a

b

Code Blank
Code C G

a
Network Option Description
No network option
b
Housing Color Description
Chrome plated Grey

10
c

Y7
de
(Level 1, d+e)

Y6
de
(Level 2, d+e)

Y3
de
(Level 3, d+e)

Y5
de
(Level 4, d+e)

L4
de
(Level 5, d+e)

P1
f

Code 24 10 20
Code Y L

c
Voltage Description 24V AC/DC 120V AC 240V AC
d
Module Type Description Steady LED Flashing LED

Code 3 4 5 6 7 8
Code Blank
P1

e
Lens Color Description Green Red Amber Blue Clear Yellow
f
Sound Description No sound Piezo sounder (continuous/pulsing)

6 7 8 9 10 11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-61

Bulletin 855W
Wall Mount Signal Light
Product Selection

0 1 2 3 4 5 6 7 8 9 10

Level 1

Housing

LED

Color Voltage Module Color

Green

Green

Blue

Clear

Blue

Blue

24V AC/DC

Clear Blue

Green

Green

Green

Green

Grey

Blue Blue

Green

Green

Blue

Blue

Clear

120V AC

Clear Green

Green

Steady Green

Green

Blue

Clear

Green

Green

Blue

Clear

Blue

Blue

24V AC/DC

Clear Blue Clear

Chrome

Clear

Green

Green

Green

Blue

Green

Green

120V AC

Green Green

Green

Level 2 LED Module Color
Amber Amber Amber Amber Steady Green Green Green Green
Red Flashing Red
Red Amber Steady Amber Green Amber Amber Green Steady Green Blue Blue
Red Flashing Red
Red Amber Steady Green Blue Amber Amber Amber Amber Green Steady Green Green Green Blue Blue
Red Flashing Red
Amber Steady Green
Red Steady Red Flashing Red
Red Steady
Amber

Level 3 LED Module Color Steady Red Flashing Red
Red Red Amber Steady Amber Amber Amber





 Steady Flashing
Steady
   Steady Steady Flashing
Steady
  Steady 

 Red Red Amber Red Red Amber Amber Green Green    Red Amber Green Red Red Red Red Amber Amber Amber Amber Green Green   Red Amber 









Steady Red

Level 4
LED Module Color





Flashing Steady Flashing Steady

Red Red Red Clear













Steady Red





Steady Flashing
Steady
   
Steady


Red Red Amber Amber     Red Amber 





Flashing Steady Flashing
Steady
   Steady 

Red Red Red Clear Amber Amber    Clear 









Level 5
LED Module Color

















Steady Red

Flashing Red

















Steady Red

















Steady Red

Flashing Red





















Piezo Sound Module

Cat. No.

855W-G24Y3Y5Y4P1

855W-G24Y3Y5L4P1

855W-G24Y6Y5Y4P1

855W-G24Y7Y5Y4P1

855W-G24Y6Y3Y5L4P1 Yes
855W-G24Y6Y3Y5Y4P1

855W-G24Y7Y3Y5L4P1

855W-G24Y6Y3Y5Y7P1

855W-G24Y3Y4P1

855W-G24Y3L4P1

855W-G24Y3Y4

855W-G24Y3Y5Y4 No
855W-G24Y6Y5Y4

855W-G24Y6Y3Y5Y4

855W-G10Y3Y5L4P1

855W-G10Y3Y5Y4P1

855W-G10Y6Y3Y5Y4P1

855W-G10Y6Y3Y5L4P1 Yes
855W-G10Y7Y6Y3Y5Y4P1

855W-G10Y7Y6Y3Y5L4P1

855W-G10Y3Y4P1

855W-G10Y3L4P1

855W-G10Y3Y4

855W-G10Y3Y5Y4 No
855W-G10Y6Y3Y5Y4

855W-G10Y7Y6Y3Y5Y4

855W-C24Y3Y5Y4P1

855W-C24Y3Y5L4P1

855W-C24Y6Y5L4P1

855W-C24Y7Y5L4P1

855W-C24Y6Y3Y5L4P1

Yes

855W-C24Y6Y3Y5Y4P1

855W-C24Y7Y3Y5L4P1

855W-C24Y6Y3Y5Y7P1

855W-C24Y7Y6Y3Y5Y4P1

855W-C24Y7Y6Y3Y5L4P1

855W-C24Y3Y4P1

Yes

855W-C24Y3L4P1

855W-C24Y3Y5Y4

No

855W-C24Y6Y3Y5Y7

855W-C24Y3Y4

855W-C10Y3Y4P1 Yes
855W-C10Y3L4P1

855W-C10Y3Y4 No
855W-C10Y3Y5Y4

11

12

13
11-62

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855W
Wall Mount Signal Light
Specifications/Approximate Dimensions

Specifications

Ingress Ratings Temperature Ratings

Light/Sound Operating Temperature Storage Temperature

Lenses and Base Cover Rubber Seals and Gaskets

Description

Operating Voltage

Current Consumption Leakage Current Impact

Steady or Flashing LED Piezo Sounder

Design Life Rating (Average life under static, no vibration conditions) Frequency
dB Rating

Steady or Flashing LED Piezo Sounder Flashing LED Piezo Sounder

Environmental Ratings

0

IP65/UL Type 4/4X/13

-25...+50 °C (-13...+122 °F)

-25...+85 °C (-13...+185 °F)

Materials

Polycarbonate (94V-0)

1

ABS

NBR 70

Electrical Ratings 24V AC/DC
24V AC/DC (± 10%)

120V AC

240V AC

2

110V AC 50 Hz (± 10%) 120V AC 60 Hz (± 10%)

230V AC 50 Hz (± 10%) 240V AC 60 Hz (± 10%)

43 mA per channel, max.

33 mA per channel, max.

30 mA per channel, max.

62 mA

24 mA  3 mA

24 mA

3

Mechanical Ratings

30 000...50 000 hrs

> 10 000 hrs 2 Hz

4

90 dBA (potentiometer adjustable down to 70 dB) All dB(A) ratings determined at a distance of 1 meter from sound module

Approximate Dimensions Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

5

D

6

A

Number of Levels 2 3 4 5

Dimension A 45 (1.77)

C
Dimension B 167.4 (6.59) 193.5 (7.62) 219.6 (8.65) 245.7 (9.67)

B
Dimension C 90 (3.54)

E
Dimension D 74 (2.91)

7

8

9

Dimension E 125 (4.92) 150 (5.91) 180 (7.09) 210 (8.27)

10 11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-63

Bulletin 855X
Hazardous Location Horns, Beacons, and Loudspeakers
Product Overview

0

Bulletin
1 Type

855XH Alarm Horn Sounders

855XB Xenon Strobe Beacons

855XC

855XL

Combined Horn Sounder and Strobe Beacon

Public Address Loudspeakers

10...30V DC, 48V DC,

12V DC, 24V DC, 48V DC,

24V DC, 48V DC, 115...120V

Voltages Available

115...120V AC 50/60 Hz,

115...120V AC 50/60 Hz,

AC 50/60 Hz, 220...230V AC



220...230V AC 50/60 Hz

220...230V AC 50/60 Hz

50/60 Hz

2 Illumination Type



Strobe 5 or 10 Joule

Strobe 5 Joule



Flash Rate

--

1 Hz

--

Lens Colors Available

--

Red, green, amber, blue, yellow, Red, green, amber, blue, yellow,

clear

clear

--

Environmental Rating
3 Operating Temp Range

NEMA Type 4/4X/13, IP66/67 -4...+131 °F (-20...+55 °C)

Sound Output Level

110...117 dB

--

110 dB

--

Horn Tones

45 selectable tones, 3 stages

--

45 selectable tones, 3 stages

--

Cover, Base, and

4

Beacon Housing Material

PPS glass-filled plastic

PPS glass-filled plastic Beacon Lens: Glass

PPS glass-filled plastic Beacon Lens: Glass

PPS glass-filled plastic

Certifications

cULus Listed, CE Marked

Product Selection

Page 11-65

Page 11-65

Page 11-66

Page 11-66

5

6

7

8

9

10

11

12

13
11-64

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855X
Hazardous Location Horns, Beacons, and Loudspeakers
Product Selection

Bulletin 855X -- Hazardous Location Horns, Beacons, and Loudspeakers
NEMA Type 4/4X/13, IP66 Glass Reinforced Plastic (GRP) and impact resistant ABS Easy to install with fully adjustable (180°) mounting bracket at 18° increments 1/2 in. NPT conduit entry and pre-wired with flying leads Electronic horns provide extremely low power consumption and long life
Functions include: Electronic horn sounder, multi-tone and multi-stage Xenon strobe beacon Combined electronic horn with Xenon strobe Public address loudspeaker
Certifications CE Marked cULus Listed (File No. E305538 for Beacons and File No. E305533 for Horns and Combination units) for Class I, Division 2, Groups A, B, C and D; Class II, Division 2, Groups F & G, and Class III, Division 1 & 2

Table of Contents
Alarm Horn Sounders....................... this page
Xenon Strobe Beacons ........................ this page
Combined Horn Sounder & Strobe Beacon........................... 11-66
Public Address Loudspeakers.............. 11-66
Specifications.............. 11-67
Approximate Dimensions................... 11-70
Standards Compliance UL 508 UL 1604 CSA C22.2 No. 14 CSA C22.2 No. 213 EN/IEC 60947-1 EN/IEC 60947-5-1

Alarm Horn Sounders

855XH ­ BN D30 B

a

b

c

Code BN

a
Product Type Description
1/2 in. NPT conduit entrance, black housing

Code D30 D48 A10 A20

b
Voltage Description 10...30V DC 48V DC
115...120V AC 220...230V AC

Code A B

Supply Voltage 10...30V DC
115...120V AC

Sound Output 110 dB @ 1 m, 45 selectable tones, 3 stages 117 dB @ 1 m, 45 selectable tones, 3 stages 110 dB @ 1 m, 45 selectable tones, 3 stages 117 dB @ 1 m, 45 selectable tones, 3 stages

c
Horn Type Description
110 dB @ 1 m/45 tone/3 stage 117 dB @ 1 m/45 tone/3 stage
Cat. No. 855XH-BND30A 855XH-BND30B 855XH-BNA10A 855XH-BNA10B

Xenon Strobe Beacons

855XB ­ BN A10 B

4

a

b

c

d

Code BN

a
Product Type Description
1/2 in. NPT conduit entrance, black housing

Code D12 D24 D48 A10 A20

b
Voltage Description 12V DC1 24V DC 48V DC
115...120V AC 220...230V AC

1 The 12V DC voltage is only configurable with the Xenon, 5 J beacon type.

Supply Voltage

Beacon Type

24V DC

Xenon Strobe - 5 J, 1 Hz Xenon Strobe - 10 J, 1 Hz

115...120V AC

Xenon Strobe - 5 J, 1 Hz Xenon Strobe - 10 J, 1 Hz

c

Beacon Type

Code

Description

A Xenon strobe - 5 J, 1 Hz

B Xenon strobe - 10 J, 1 Hz

Lens Color Red
Amber Red
Amber Red
Amber Red
Amber

Code 3 4 5 6 7 8

d
Lens Color Description Green Red Amber Blue Clear Yellow

Cat. No. 855XB-BND24A4 855XB-BND24A5 855XB-BND24B4 855XB-BND24B5 855XB-BNA10A4 855XB-BNA10A5 855XB-BNA10B4 855XB-BNA10B5

0 1 2 3 4 5 6 7 8 9 10 11 12 13

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

11-65

Bulletin 855X
Hazardous Location Horns, Beacons, and Loudspeakers
Product Selection

Combined Horn Sounder & Strobe Beacon

0

855XC ­ BN A10 A 3

a

b

c

d

1 a

Product Type

Code

Description

2

BN

1/2 in. NPT conduit entrance, black housing

3

Code D24 D48 A10 A20

b
Voltage Description 24V DC 48V DC
115...120V AC 220...230V AC

Code A

c
Beacon Type
Description
Xenon strobe - 5 J, 110 dB @ 1 m,
45 tones, 3 stages

Code 3 4 5 6 7 8

d
Lens Color Description Green Red Amber Blue Clear Yellow

Beacon Type
4
Xenon 5 J, 110 dB at 1 m, 45 selectable tones, 3 stages
5
Public Address Loudspeakers
6

7 Code BN
8

a
Product Type Description
1/2 in. NPT conduit entrance, black housing

Supply Voltage 24V DC
115 V AC

Beacon Lens Color Green Red Amber Green Red Amber

Cat. No. 855XC-BND24A3 855XC-BND24A4 855XC-BND24A5 855XC-BNA10A3 855XC-BNA10A4 855XC-BNA10A5

855XL ­ BN 70 A

a

b

c

Code 70
100 8R 16R

b
Power Selection - Transformer Description 70V line
(tappings: 15 W, 7.5 W, 3 W, 1 W) 100V line
(tappings: 15 W, 7.5 W, 3 W, 1 W) 8  16 

Code A

c
Power Handling Description 15 W RMS

9 10

Power Handling 15 W RMS

Power Selection 70V Line (Tappings: 15W 7.5W 3W 1W)
8  16 

Cat. No. 855XL-BN70A 855XL-BN8RA 855XL-BN16RA

11

12

13
11-66

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855X
Hazardous Location Horns, Beacons, and Loudspeakers
Specifications

Device

Shock Vibration

Ingress Ratings Temperature Ranges

Operating Storage

Covers Bases Mounting Bracket Gaskets Beacon Lens Beacon Housing

Sound Output Xenon Lamp Rating Flashing Frequency

dB @ 1 meter

855XH Horn

855XB Beacon

Mechanical Ratings

855XC Horn-Beacon

Combination

855XL PA Loudspeaker
0

30 G Peak

2 G Peak

Environmental Ratings

IP66/67 and UL Type 4/4X13, IP 66/67

1

-4...+131 °F (-20...+55 °C)

-4...+167 °F (-20...+75 °C)

Materials

PPS glass-filled plastic PPS glass-filled plastic

2

Stainless Steel 304 (A2)

Viton

Glass

PPS glass-filled plastic

3

Performance Ratings

110 or 117 dB

N/A

110 dB

N/A

N/A

5 or 10 Joules

5 Joules

N/A

N/A

1 Hz

1 Hz

N/A

4

Operating Ratings (Voltage and Current Consumption)

Device
855XH Horn 110 dB @ 1 m

Input Voltages DC Units: 10...30V or 48V AC Units: 120V or 230V 50/60Hz

12V AC/DC  

24V AC/DC 284 mA (30V)


48V DC

(Max. I/P Volts) 146 mA (58V)

10V AC 50/60 Hz 230V AC 50/60 Hz





5



104 mA (132V)

54 mA (253V)

855XH Horn

DC Units: 10...30V or 48V



280 mA (30V)

215 mA (58V)





117 dB @ 1 m

AC Units: 120V or 230V 50/60Hz







142 mA (132V)

76 mA (253V)

855XB Beacon

DC Units: 12 or 24V or 48V

520 mA (15V)

275 mA (30V)

145 mA (58V)





6

5 Joules

AC Units: 120V or 230V 50/60Hz







80 mA (132V)

30 mA (253V)

855XB Beacon

DC Units: 24V or 48V



10 Joules

AC Units: 120V or 230V 50/60Hz



560 mA (30V) 

260 mA (58V) 

 185 mA (132V)

 107 mA (253V)

Horn Section DC Units: 24V or 48V



855XC Combined

Horn (110 dB @ 1 m)

Horn Section AC Units: 120V or 230V 50/60Hz



and Strobe Beacon

Beacon Section DC Units: 24V or 48V



(5 Joules)

Beacon Section AC Units: 120V or 230V 50/60Hz



284 mA (30V)

146 mA (58V)





7





104 mA (132V)

54 mA (253V)

275 mA (30V)

145 mA (58V)





8





80 mA (132V)

30 mA (253V)

Device 855XL PA Loudspeaker 1

Impedance 8  16 
100V Line 70V Line

Operating Ratings Input 8  16 
100V Line 70V Line

Wattage 15 W 15 W 15 W 15 W

Max. I/P Volts 10.95V 15.49V 100V 70V

1 Power Amplifier Selection: It is important that loudspeakers are connected to power amplifiers that have outputs compatible to the type of loudspeaker being used. Loudspeakers with a 70V or 100V line-matching transformer fitted must be connected to a power amplifier with a 70V or 100V line output. Lowimpedance 8  or 16  loudspeakers must be connected to amplifiers with a suitable low-impedance output.

9 10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-67

Bulletin 855X
Hazardous Location Horns, Beacons, and Loudspeakers
Specifications

0

Device

855XB- 5 Joule Beacon

1 855XB- 10 Joule Beacon

2

855XH- 110 dB Sounder

855XH- 117 dB Sounder
3
855XC- Sound/Strobe Combination

4 855XL- Loudspeaker

Temperature Ratings

Hazardous Location

Code (Max. Operating Temperature) @ 55 ºC Ambient

Class I, Division 2, Groups A, B, C, D

T2D (215 ºC)

Class II, Division 2, Groups F and G

T5 (100 ºC)

Class III, Divisions 1 and 2

T5 (100 ºC)

Class I, Division 2, Groups A, B, C, D

T2A (280 ºC)

Class II, Division 2, Groups F and G

T4A (120 ºC)

Class III, Divisions 1 and 2

T4A (120 ºC)

Class I, Division 2, Groups A, B, C, D

T3C (160 ºC)

Class II, Division 2, Groups F and G

T6 (85 ºC)

Class III, Divisions 1 and 2

T6 (85 ºC)

Class I, Division 2, Groups A, B, C, D

T3C (160 ºC)

Class II, Division 2, Groups F and G

T6 (85 ºC)

Class III, Divisions 1 and 2

T6 (85 ºC)

Class I, Division 2, Groups A, B, C, D

T2D (215 ºC)

Class II, Division 2, Groups F and G

T5 (100 ºC)

Class III, Divisions 1 and 2

T5 (100 ºC)

Class I, Division 2, Groups A, B, C, D

T4 (135 ºC)

Class II, Division 2, Groups F and G

T6 (85 ºC)

Class III, Divisions 1 and 2

T6 (85 ºC)

Code (Max. Operating Temperature) @ 40 ºC Ambient T3 (200 ºC) T6 (85 ºC) T6 (85 ºC)  T5 (100 ºC) T5 (100 ºC) T4 (135 ºC)   T4 (135 ºC)   T3 (200 ºC) T6 (85 ºC) T6 (85 ºC) T4A (120 ºC)  

5

6

7

8

9

10

11

12

13
11-68

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

Bulletin 855X
Hazardous Location Horns, Beacons, and Loudspeakers
Specifications

Stage 1 1 2 3 4 5 6 7 8 9 10 11 12 13 14 15 16 17 18 19 20 21 22 23 24 25 26 27 28 29 30 31 32 33 34 35 36 37 38 39 40 41 42 43 44 45

Tone Selection Table for 855XH and 855XC units

Switch

Frequency Description

123456

340 Hz, Continuous

000000

800/1000 Hz @ 0.25 s, Alternating

100000

500/1200 Hz @ 0.3 Hz s, Slow Whoop

010000

800/1000 Hz @ 1 Hz, Sweeping

110000

2400 Hz, Continuous

001000

2400/2900 Hz @ 7 Hz, Sweeping

101000

2400/2900 Hz @ 1 Hz, Sweeping

011000

500/1200/500 Hz @ 0.3 Hz, Sweeping

111000

1200/500 Hz @ 1 Hz, - DIN PFEER P.T.A.P.

000100

2400/2900 Hz @ 2 Hz, Alternating

100100

1000 Hz @ 1 Hz, Intermittent

010100

800/1000 Hz @ 0.875 Hz, Alternating

110100

2400 Hz @ 1 Hz, Intermittent

001100

800 Hz, 0.25 s ON, 1 s OFF, Intermittent

101100

800 Hz, Continuous

011100

660 Hz, 150 ms ON, 150 ms OFF, Intermittent

111100

544 Hz (100 ms)/440 Hz (400 ms), - NF S 32-001

000010

660 Hz, 1.8 s ON, 1.8 s OFF, Intermittent

100010

1.4 kHz...1.6 kHz 1s, 1.6 kHz...1.4 kHz 0.5 s, - NFC48-265

010010

660 Hz, Continuous

110010

554 Hz/440 Hz @ 1 Hz, Alternating

001010

544 Hz @ 0.875 s, Intermittent

101010

800 Hz @ 2 Hz, Intermittent

011010

800/1000 Hz @ 50 Hz, Sweeping

111010

2400/2900 Hz @ 50 Hz, Sweeping

000110

Bell

100110

554 Hz, Continuous

010110

440 Hz, Continuous

110110

800/1000 Hz @ 7 Hz, Sweeping

001110

300 Hz, Continuous

101110

660/1200 Hz @ 1 Hz, Sweeping

011110

Two-tone chime

111110

745 Hz @ 1 Hz, Intermittent

000001

1000 & 2000 Hz @ 0.5 s, Aletrnating - Signapore

100001

420 Hz @ 0.625 s, Australian Alert

010001

500-1200 Hz 3.75 s/0.25 s, Australian Evac.

110001

1000 Hz, Continuous, - PFEER Toxic Gas

001001

2000 Hz, Continuous

101001

800 Hz 0.25 s ON, 1 sec OFF, Intermittent

011001

544 Hz (100 ms)/440 Hz (400 ms), - NF S 32-001

111001

Motor Siren - slow rise to 1200 Hz

000101

Motor Siren - slow rise to 800 Hz

100101

1200 Hz, Continuous

010101

Motor Siren - slow rise to 2400 Hz

110101

1 KHz 1 s ON, 1 s OFF, Intermittent, - PFEER Gen. Alarm

001101

Stage 2 Tone 2 Tone 17 Tone 2 Tone 6 Tone 3 Tone 7 Tone 10 Tone 2 Tone 15 Tone 7 Tone 2 Tone 4 Tone 15 Tone 4 Tone 18 Tone 2 Tone 2 Tone 2 Tone 2 Tone 2 Tone 2 Tone 2 Tone 6 Tone 29 Tone 29 Tone 2 Tone 26 Tone 2 Tone 7 Tone 2 Tone 26 Tone 26 Tone 2 Tone 38 Tone 36 Tone 35 Tone 9 Tone 34 Tone 23 Tone 31 Tone 2 Tone 2 Tone 2 Tone 2 Tone 38

Stage 3 Tone 5 Tone 5 Tone 5 Tone 5 Tone 20 Tone 5 Tone 5 Tone 5 Tone 2 Tone 5 Tone 5 Tone 5 Tone 5 Tone 5 Tone 5 Tone 27 Tone 5 Tone 5 Tone 5 Tone 5 Tone 5 Tone 5 Tone 5 Tone 5 Tone 5 Tone 15 Tone 5 Tone 5 Tone 5 Tone 5 Tone 5 Tone 15 Tone 5 Tone 45 Tone 5 Tone 5 Tone 45 Tone 45 Tone 17 Tone 27 Tone 5 Tone 5 Tone 5 Tone 5 Tone 34

0 1 2 3 4 5 6 7 8 9 10

11

12

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P

13
11-69

Bulletin 855X
Hazardous Location Horns, Beacons, and Loudspeakers
Approximate Dimensions

Dimensions in millimeters (inches). Dimensions are not intended to be used for manufacturing purposes.

0 Horns

321 (12.64)

1

220 (8.66) 142 (5.59)

2
272 (10.71)
3

181 (7.13) 142 (5.59) 160 (6.30)

4 5 Beacons 6

172 (6.77)

232 (9.13)

142 (5.59)

160 (6.30)

7
Horn & Beacon Combinations
8

382 (15.04)

181 (7.13)

9

160 (6.30)

10
Public Address Loudspeakers
11

272 (10.71)

142 (5.59) 160 (6.30)

181 (7.13)

12

13
11-70

www.ab.com/catalogs Preferred availability cat. nos. are bold. Publication A117-CA001A-EN-P


Acrobat Distiller 11.0 (Windows)