Manual-Hub.com - Free English product PDF Documents!
Instruction Manual for JUKI models including: PLC-2710NV Walking Foot Machine, PLC-2710NV, Walking Foot Machine, Foot Machine, Machine
JUKI PLC-2710NV (01) PDF MANUAL - Manual-Hub.com
File Info : application/pdf, 4 Pages, 949.66KB
DocumentDocumentPLC-2710NV INSTRUCTION MANUAL
https://manual-hub.com/
CONTENTS
1. Specifications ................................................................................................................. 1 2. Threading the machine head......................................................................................... 2
CAUTION
This Instruction Manual for the PLC-2710NV only describes their differences from the standard models (PLC-2710V). For safety-related information, carefully read and fully understand "Safety precautions" described in the Instruction Manual for the standard models before using your sewing machine.
ii
https://manual-hub.com/
1. Specifications
PLC-2710NVS70BBZ
Model Sewing speed
Item
Stitch length Needle Applicable thread size for sewing Applicable thread size to be cut Motor Presser foot pressure control Horizontal feed control Alternate vertical feed control Lubricating oil
Number of patterns
Noise
Application PLC-2710NV
Max. 2,500 sti/min Refer to "10. SEWING SPEED TABLE" in the Instruction Manual for the standard model.
Max. 12 mm
SCHMETZ 134×35 (Nm 125 to Nm 200) (Standard : Nm 140)
#30 to #0 (US: #46 to #266, Europe: 60/3 to 10/3)
#30 to #0 (US: #46 to #266, Europe: 60/3 to 10/3)
AC servo motor
Electronic control
Electronic control
Electronic control
JUKI New Defrix Oil No. 1 (equivalent to ISO standard VG7) or JUKI MACHINE OIL No. 7
Sewing pattern ............................ 99 patterns (For the polygonal shape sewing, as many as 10 patterns can be registered.)
Cycle sewing pattern ................... 9 patterns Custom-pitch pattern ................... 20 patterns Condensation custom pattern ..... 9 patterns
- Equivalent continuous emission sound pressure level (LpA) at the workstation: A-weighted value of 83.5 dB; (Includes KpA = 2.5 dB); according to ISO 10821- C.6.2 - ISO 11204 GR2 at 2,500 sti/min.
- Sound power level (LWA); A-weighted value of 90.5 dB; (Includes KWA = 2.5 dB); according to ISO 10821- C.6.2 - ISO 3744 GR2 at 2,500 sti/min.
1
https://manual-hub.com/
2. Threading the machine head
WARNING :
To protect against possible personal injury due to abrupt start of the machine, be sure to start the following work after turning the power off and ascertaining that the motor is at rest.
Thread the machine head following the order as illustrated in the figure.
If you want to perform thread trimming at a position where no material exists, it is necessary to change thread guide with the suitable thread guide. The thread guide to be used instead of the current one is supplied with the unit as an accessory. Part number of replacement thread guide: 40034675
2
https://manual-hub.com/