Installing Canon PIXMA E4570 on Windows via USB Connection

Important Notes

Warning: Do not plug in the USB cable until the driver installation prompts you to do so, to prevent system errors.

The following steps and screenshots are for reference only. Actual operation screens may differ based on your device model, system, or software version.

Download and Installation Procedure

1. Visit the Canon support website to download the printer driver:

   https://hk.canon/en/support/pixma%20e4570/model

2. Select and download the appropriate driver file:

   TR4600/TR4700/E4500 series MP Driver Ver.x.xx (Windows)

3. After the download is complete, click [Download] on the webpage and then execute the downloaded file.

4. Click [Next] to proceed with the installation.

5. Select [Asia] from the region list and click [Next].

6. Click [Yes] to agree to the license terms.

7. Connect the USB cable to your printer and computer as shown in the illustration. In the Canon IJ Driver Installer, select the printer with the USB connection method from the list, and click [Next].

   The installer displays detected printers, showing the product name (e.g., Canon PIXMA E4570 Series), serial number, connection method (USB), and IP addresses.

8. The driver installation process will begin. Please wait while the software is installed.

   A progress bar indicates the installation status.

9. Once the driver installation is completed, click [Finish].

   The installer confirms successful driver installation, listing the printer name as 'Canon PIXMA E4570 Series'. You may choose to 'Set as default printer' before finishing.