VH221N

ECAT

SPEC SHEET

VH221N SQD 2P 30A SFTY SWITCH | Kendall Electric Inc

PDF preview unavailable. Download the PDF instead.

11003 QVY1BUT8HI6N9PDF
Product data sheet
Characteristics
Complementary
Short-circuit current Fuse type Mounting Type Electrical Connection Wiring configuration Wire Size Tightening torque Depth Width Height Net Weight Services Condition of use
Environment
Certifications
Ordering and shipping details
Category Discount Schedule GTIN Returnability
May 24, 2023

VH221N
Safety switch, heavy duty, fused, viewing window, Type 1, 240V, 30A, 2 pole, neutral installed

Main
Product Duty Rating Device Application Disconnect Type Factory Installed Neutral Number of Poles Current Rating Voltage Rating
Enclosure Rating Motor power hp

Single Throw Safety Switch
Heavy duty
Heavy application
Fusible disconnect
Neutral (factory installed)
2
30 A
250 V DC 240 V AC
NEMA 1 steel
1.5 Hp at 240 V AC 50-60 Hz for 1 phase motors 3 Hp at 240 V AC 50-60 Hz for 3 phase motors 3 Hp at 240 V AC 50-60 Hz for 1 phase motors 7.5 Hp at 240 V AC 50-60 Hz for 3 phase motors 5 hp at 250 V DC

10 KA for H, K, J or R without fuse rejection clips 200 KA for R with fuse rejection clips 200 kA for J
H or K R or J
Surface
Lugs
3-wire (2P + N)
AWG 12...AWG 6 aluminium AWG 14...AWG 6 copper
45 Lbf.In (5.08 N.m) 0.02 in² (13.3 mm²) (AWG 6) 40 Lbf.In (4.52 N.m) 0.01 in² (8.367 mm²) (AWG 8) 35 lbf.in (3.95 N.m) 0.00...0.01 in² (2.06...5.261 mm²) (AWG 14...AWG 10)
5.11 in (129.79 mm)
6.36 in (161.54 mm)
14.57 in (370.08 mm)
8.82 lb(US) (4 kg)
Field installed kit available
Suitable service entrance for USA Suitable service entrance for Mexico

UL listed file E2875

00008-H&HU SW,2&3P,N1,30-200A DE1 3606485892962 Yes

1

The information provided in this documentation contains general descriptions and/or technical characteristics of the performance of the products contained herein. This documentation is not intended as a substitute for and is not to be used for determining suitability or reliability of these products for specific user applications. It is the duty of any such user or integrator to perform the appropriate and complete risk analysis, evaluation and testing of the products with respect to the relevant specific application or use thereof. Neither Schneider Electric Industries SAS nor any of its affiliates or subsidiaries shall be responsible or liable for misuse of the information contained herein.

Packing Units
Unit Type of Package 1 Number of Units in Package 1 Package 1 Height Package 1 Width Package 1 Length Package 1 Weight
Offer Sustainability
California proposition 65
EU RoHS Directive

PCE 1 5.00 in (12.7 cm) 7.50 in (19.05 cm) 15.62 in (39.687 cm) 8.82 lb(US) (4 kg)
WARNING: This product can expose you to chemicals including: Lead and lead compounds, which is known to the State of California to cause cancer and birth defects or other reproductive harm. For more information go to www.P65Warnings.ca.gov Under investigation

2