Coat Rack Assembly Instructions
Item No: 194840333388
Thank you for purchasing this quality product. Be sure to check all packing material carefully for small parts that may have come loose inside the carton during shipment.
Please note that the maximum weight load for each hook is 5kgs, and the total weight load cannot exceed 15kgs.
Part Lists
| NO. | Description | Sketch | Qty |
|---|---|---|---|
| A | TOP POST | [Post component] | 1PC |
| B | MIDDLE POST | [Post component] | 1PC |
| C | BOTTOM POST | [Post component] | 1PC |
| D | BASE - TOP | [Base component] | 1PC |
| E | BASE - BOTTOM | [Base component] | 1PC |
| F | LONG HOOK (180MM) | [Long hook component] | 3PCS |
| G | SHORT HOOK (90MM) | [Short hook component] | 6PCS |
Assembly Steps
Step 1: Assemble the Base. Connect the Base - Top (D) and Base - Bottom (E) parts to create the base. Insert the Bottom Post (C) into the center of the assembled base.
Step 2: Assemble the Posts. Attach the Middle Post (B) to the Bottom Post (C). Then, attach the Top Post (A) to the Middle Post (B). Ensure all connections are secure.
Step 3: Attach Hooks. Screw the Long Hooks (F) and Short Hooks (G) into the designated slots on the Top Post (A), Middle Post (B), and Bottom Post (C) as shown in the diagrams.
Step 4: Final Assembly. The coat rack is now assembled and ready for use.
⚠ It is recommended to install protective pads under all legs and supports to avoid damage or scratches when placing furniture on a wood floor or other hard surface, and to limit indentation and prevent discoloration if placing on carpet.
