Assembly Instructions
Product Model: K: 43522675 | T: 70721287
Product Name: CLEAR 5 TIER SHOE RACK
Care Instruction
Wipe clean with a soft dry or damp cloth. For indoor use only.
Warning
This package contains small parts. Keep unassembled parts away from children and babies.
Maximum Safe Load: 3KG PER TIER
Hardware List
Part | Description | Quantity |
---|---|---|
A | Long pole/tube | 5PCS |
B | Short pole/tube | 16PCS |
C | Connector piece | 4PCS |
D | Shelf base | 4PCS |
a | Screw/Bolt | 2PCS |
b | Nut/Cap | 2PCS |
c | Small connector/clip | 2PCS |
d | Small connector/clip | 2PCS |
Assembly Steps
Step 1
Attach one long pole (A) to a short pole (B) using a connector piece (C) and one screw (X1). Ensure the end of the inner tube (B) meets the line of the outer tube (A) during installation.
Step 2
Connect two short poles (B) to a connector piece (C) using two screws (X3).
Step 3
Construct the side frames. Connect two long poles (A) using short poles (B) and connector pieces (C), secured with screws (X4 and X12). This forms the basic structure for the sides of the shoe rack.
Step 4
Join the two side frames using additional short poles (B) and shelf bases (D). Secure these components with screws (X4).
Step 5
With all shelves in place, the main structure is complete. After the product is fully assembled, press each corner down firmly until the shoe rack is installed in place.
Step 6
The final assembly shows the completed 5-tier shoe rack. Hardware pieces 'a', 'd', and 'b/c' are shown attached to the top and bottom sections for stability.