Warranty and Contact Information
Contact Us:
- Email: care@baseus.com
- Website: https://www.baseus.com
- Phone (US): +1 800 220 8056
Warranty Details:
- 24-Month Warranty
- Lifetime Tech Support
Powering On/Off
To Power On: Open the charging case. The earbuds will automatically enter pairing mode.
To Power Off: Place the earbuds back into the charging case and close the lid.
(Diagram description: Visuals show the charging case opening with earbuds inside, and then closing.)
Pairing
Enable Bluetooth on your phone and select "Baseus Inspire XP1" from the device list.
Note: The earbuds will remember the last connected devices and reconnect automatically when powered on.
(Diagram description: Shows a phone screen with Bluetooth enabled and "Baseus Inspire XP1" selected, and an illustration of the earbuds and case.)
Manual Pairing
To manually activate pairing mode: Place both earbuds in the charging case with the lid open. Press and hold the case button for 3 seconds until the indicator light pulses white.
(Diagram description: Shows earbuds in an open charging case, with a finger pressing the case button, and a visual of the indicator light pulsing white.)
Multipoint Pairing
Follow these steps to connect to two devices simultaneously:
- Connect the earbuds to Device A. Then, turn off Bluetooth on Device A.
- Connect the earbuds to Device B.
- Turn on Bluetooth on Device A. The earbuds will automatically reconnect. Your multipoint connection is now ready.
(Diagram description: A three-step visual guide showing connection to device A, then device B, then reconnection to A.)
Touch Controls
Control your earbuds with simple touch gestures:
- Double Tap (L or R earbud): Play/Pause Music, Answer/End Call.
- Triple Tap (L or R earbud): Next Track, Previous Track.
- Tap and Hold (L or R earbud) for 1.5 seconds: Activate Voice Assistant or switch ANC modes (Noise Reduction/Transparency).
Note: You can also customize these touch controls in the Baseus App.
(Diagram description: Visuals showing earbuds with touch areas indicated, and icons representing actions like music playback, calls, voice assistant, and ANC.)
App Control
Scan the QR code to download the Baseus App. Follow the in-app instructions to link your earbuds and access custom settings.
Ensure the earbuds are near your device and the App is up to date.
(Diagram description: Shows a smartphone scanning a QR code, with the Baseus logo and app icon visible.)
Charging & Recharging
Monitor charging status via the LED indicator:
- Less than 20%: Red light
- 20% – 40%: Yellow light
- More than 40%: Green light
During charging, the light pulses. Once fully charged, the light stays solid green.
(Diagram description: Shows the charging case with earbuds, and an illustration of the charging cable connecting to the case. Also shows the LED indicator states.)
Factory Reset
To reset your earbuds to factory default settings: Place both earbuds in the charging case and keep the lid open. Press and hold the button on the case for approximately 8 seconds until the indicator flashes white three times. This will restore the default settings in the app.
(Diagram description: Shows earbuds in an open charging case, with a finger pressing the case button for an extended duration, and an indicator light flashing white.)
Support
For FAQs, detailed manuals, and more information, please visit:
https://www.baseus.com/pages/support-center
(Diagram description: Shows a laptop icon with a download arrow and a "FAQ" tag.)
Specifications
- Name: Baseus True Wireless Earbuds
- Model: A00109
- Rated Input: 5 V= 100 mA (per earbud), 5 V= 1 A (charging case)
- Full Charge Time: ≈ 1.5 hours
- Frequency Response Range: 20 Hz – 20 kHz
- Charging Port: USB-C
- Bluetooth Maximum Output Power: -0.51 dBm for EU
- Frequency Band: 2402 MHz – 2480 MHz
Note: Data provided by Baseus Lab; actual use may vary.
What's in the Box
- Charging Case × 1
- Earbud × 2
- Ear Tip × 4
- Charging Cable × 1
- Quick Start Guide × 1
- Safety Instructions × 1
(Diagram description: Visuals of each item included in the package.)
Safety & Compliance
Charging Power Requirements
The charger's power output must be between a minimum of 2.5 Watts (required by radio equipment) and a maximum of 5 Watts for optimal charging speed.
Battery Safety Warnings
Warning: Please follow all safety instructions to avoid fire, electric shock, damage, or injury.
- Incorrect battery replacement can compromise safety features.
- Disposing of batteries in fire, hot ovens, or crushing/cutting them can cause explosions.
- High temperatures can lead to explosions or leakage of flammable liquids/gases.
- Low air pressure environments may also cause explosions or leakage.
- Avoid extreme temperatures (use: max 40°C, storage: -20°C to 45°C, transport: 5°C to 35°C) and low air pressure during use, storage, or transportation.
FCC Information
FCC ID: 2A482-A00109
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
The device has been evaluated to meet general RF exposure requirements and can be used in portable exposure conditions without restriction.
Manufacturer Information
Manufacturer: Shenzhen Baseus Technology Co., Ltd.
Address: 2nd Floor, Building B, Baseus Intelligence Park, No.2008, Xuegang Rd, Gangtou Community, Bantian Street, Longgang District, Shenzhen
Website: www.baseus.com
Follow Baseus on social media: Facebook, Instagram, X (Twitter), YouTube, TikTok.
Trademarks: Bluetooth® is a trademark of Bluetooth SIG, Inc. Dolby, Dolby Audio, and the double-D symbol are trademarks of Dolby Laboratories Licensing Corporation. Sound by Bose is a trademark of Bose Corporation.
Recycling Information: Please recycle this device and its cords responsibly. More information available at www.quefairedemesdechets.fr.
If you need help, please contact us:
Phone: (Global) +1 800 220 8056
Email: (Global) care@baseus.com
Baseus Official | Practical. Reliable. Base on User.
