Edge | Juniper Networks US
AP34 Access Point Datasheet | Juniper Networks UK&I
File Info : application/pdf, 5 Pages, 514.97KB
DocumentDocumentProduct Overview The AP34 is a tri-band device with 2 spatial streams for transmitting and receiving data over three client- serving radios, with a fourth sensor radio dedicated to monitoring. Data Sheet AP34 ACCESS POINT DATASHEET Juniper AI-Driven Network The Juniper AP34 integrates Mist AI for AX capabilities and omnidirectional Bluetooth antenna to automate network operation and boost Wi-Fi performance for devices on your network in the 6 GHz (Wi-Fi 6E) band. Juniper's AI solutions for 6E helps support optimized operator and user experiences with secure client-to-cloud automation, insight, and AI-driven actions. The Juniper AI-Driven Enterprise makes Wi-Fi predictable, reliable, and measurable, offering unprecedented visibility into the user experience through the use of unique service-level expectation (SLE) metrics. Proactive, AI-driven automation and self- healing replace time-consuming manual tasks, lowering Wi-Fi operational costs and saving substantial time and money. The AP34 is ideal for areas where you need a highperformance, tri-band access point but don't require advanced location- based services. All operations are managed using the open and programmable microservices-based Juniper MistTM cloud architecture. The system delivers maximum network scalability and performance while also bringing DevOps agility to WLANs and location services. The Juniper Mist Cloud Architecture Our cloud-native, AI-driven microservices architecture delivers unparalleled agility, scale, and resiliency to your network. It lowers OpEx and delivers unprecedented insights into network performance, behaviors, traffic patterns, and potential trouble spots by using data science to analyze large amounts of rich metadata collected by Juniper Access Points. Juniper Access Point Family The Juniper enterprise-grade access point family consists of: · AP45 Series and AP34, which support Wi-Fi 6E, 802.11ax (Wi-Fi 6), and Bluetooth LE · AP43, AP12, AP32, AP33, and AP63 Series, which support 802.11ax (Wi-Fi 6) and Bluetooth LE These access points are all managed by the real-time microservices based in Juniper Mist cloud. 1 AP34 Access Point Datasheet The table below compares the supported major functions of the Juniper Wi-Fi 6E and Wi-Fi 6 access points to help in selecting the most appropriate model(s). Deployment AP45 Indoor AP34 Indoor AP43 Indoor AP63 Outdoor AP33 Indoor Wi-Fi Standard Wi-Fi Radios Antenna Options Virtual BLE IoT Interface IoT Sensors Warranty Frequencies Supported Wi-Fi 6E 802.11ax (Wi- Wi-Fi 6E 802.11ax Fi 6 ) 4x4 : 4SS (Wi-Fi 6 ) 2x2 : 2SS Dedicated fourth radio Dedicated fourth radio Internal/External -- Temperature, Accelerometer Limited Lifetime 2.4GHz Internal -- -- Temperature Limited Lifetime 2.4GHz 5GHz 6GHz 5GHz 6GHz 802.11ax (Wi-Fi 6 ) 4x4 : 4SS Dedicated third radio Internal/External 802.11ax (Wi-Fi 6) 4x4 : 4SS Dedicated third radio Internal/External 802.11ax (Wi-Fi 6) 5GHz: 4x4 : 4SS 2.4GHz: 2x2 :2SS Dedicated third radio Internal Humidity, Pressure, Temperature Limited Lifetime 2.4GHz -- -- One Year 2.4GHz -- -- Limited Lifetime 2.4GHz 5GHz 5GHz 5GHz AP32 Indoor 802.11ax (Wi-Fi 6) 5GHz: 4x4 : 4SS 2.4GHz: 2x2 : 2SS AP12 Indoor Wall Plate/Desk Mount 802.11ax (Wi-Fi 6) 2x2 : 2SS Dedicated third radio Dedicated third radio Internal/External -- -- Internal -- -- -- -- Limited Lifetime 2.4GHz Limited Lifetime 2.4GHz 5GHz 5GHz Available for the Juniper AP34 Wi-Fi Cloud Services Juniper Mist Wi-Fi Assurance For IT and NOC Teams · Predictable and Measurable Wi-Fi · Service-Level Expectations (SLEs) Support · WxLAN Policy Fabric for Role-Based Access · Customizable Guest Wi-Fi Portal · Radio Resource Management (RRM) Driven by AI Marvis Virtual Assistant For IT Helpdesk Teams · AI-Powered Virtual Network Assistant · Natural Language Processing Interface · Anomaly Detection · Client SLE Visibility and Enforcement · Data Science-Driven Root-Cause Analysis Bluetooth Cloud Services Juniper Mist Mobile Engagement For Digital Experience Teams · Accurate (1-3m) Turn-by-Turn Navigation · Sensor Fusion with Dead Reckoning · Unsupervised Machine Learning · Virtual Beacons with Custom Notifications · Mobile SDK for iOS and Android Juniper Mist Asset Visibility For Process and Resource Improvement Teams · Identification of Assets by Name and View Location · Zonal/Room Accuracy for Third-Party Tags · Historical Analytics for Asset Tags · Telemetry for Asset Tags (temperature, motion, and other data) · APIs for Viewing Assets and Analytics Analytics Cloud Services Juniper Mist Premium Analytics For Network Teams · Baseline Analytics Features Come Included with Wi-Fi Assurance, Mobile Engagement, and Asset Visibility Subscriptions · End-to-End Network Visibility · Orchestrated Networking and Application Performance Queries · Simplified Network Transparency 2 AP34 Access Point Datasheet For Business Teams · Baseline Analytics Features Come Included with Wi· Fi Assurance, Mobile Engagement, and Asset Visibility Subscriptions · Customer Segmentation and Reporting Based on Visitor Telemetry · Customized* Dwell and Third-Party Reporting for Traffic and Trend Analysis · Correlation of Customer-Guest Traffic and Trend Analysis · Correlated Customer-Guest Traffic and Trend Analysis *Juniper Mist Premium Analytics service subscription is needed Access Point Features High Performance Wi-Fi The AP34 is comprised of tri-band, quad-radio 2x2 802.11ax with maximum data rates of 2400 Mbps in the 6GHz band, 1200 Mbps in the 5GHz band, and 575 Mbps in the 2.4GHz band. The fourth radio functions as a network, location, and security sensor, a synthetic test client radio, as well as a spectrum monitor. With 802.11ax Orthogonal Frequency Division Multiple Access (OFDMA), Multi-User Multiple Input Multiple Output (MU-MIMO), and BSS Coloring technologies, the AP34 offers performance at unprecedented levels to support new bandwidth-hungry applications and soaring device densities. Automatic RF Optimization Radio Resource Management automates dynamic channel and power assignment, taking Wi-Fi and external sources of interference into account with a dedicated sensor radio. The AI engine continuously monitors coverage and capacity SLE metrics to learn and optimize the RF environment. A learning algorithm uses hysteresis on a 24-hour window to conduct a sitewide rebalancing for optimal channel and power assignment. Unprecedented Insight and Action A dedicated, dual-band third radio collects data for Juniper's patent- pending Proactive Analytics and Correlation Engine (PACE), which uses machine learning to analyze user experiences, correlate problems, and automatically detect their root causes. These metrics are used to monitor SLEs and provide proactive recommendations to ensure problems don't occur (or are fixed as quickly as possible when they do). This radio also functions as a synthetic test client to proactively detect and mitigate network anomalies. Improved IoT Battery Efficiency By incorporating the 802.11ax target wake time (TWT) capability and Bluetooth 5.0, AP34 access points help extend the battery life of IoT devices, particularly as additional ones join the network. AI for AX With the features 802.11ax (Wi-Fi 6) offers to boost performance and efficiency, configuring and operating an access point has grown far more complex. Juniper automates and optimizes these features with AI for AX capabilities to optimize BSS Coloring, improve data transmission scheduling within OFDMA and MU-MIMO, and assign clients to the best radio to boost the overall performance of the network. Greater Spectral Efficiency OFDMA improves spectral efficiency so that an increasing density of devices can be supported on the network. Density has become an issue with the rapid growth of IoT devices, which often utilize smaller data packets than mobile devices and hence increase the burden and contention on the network. Additionally, BSS Coloring improves the coexistence of overlapping BSSs and allows spatial reuse within a given channel by reducing packet collisions. Dynamic Debugging Constantly monitor services running on the AP34 and send alerts whenever a service behaves abnormally. Dynamic debugging relieves IT of having to worry about an AP going offline or any services running on it becoming unavailable. Dynamic Packet Capture The Juniper Mist platform automatically captures packets and streams them to the cloud when major issues are detected. This saves IT time and effort and eliminates the need for truck rolls with sniffers to reproduce and capture data for troubleshooting. Marvis Virtual Conversational Assistant Marvis is a natural language processing (NLP)-based assistant with a Conversational Interface to understand user intent and goals, simplifying troubleshooting and the collection of network insights. It uses AI and data science to proactively identify issues, determine the root causes and scope of impact, and gain insights into your network and user experiences. It eliminates the need to manually hunt through endless dashboards and CLI commands. 3 AP34 Access Point Datasheet Effortless, Cloud-Based Setup and Updates The AP34 automatically connects to the Juniper Mist cloud, downloads its configuration, and joins the appropriate network. Firmware updates are retrieved and installed automatically, ensuring that the network is always up to date with new features, bug fixes, and security updates. Premium Analytics Our Wireless Assurance, User Engagement, and Asset Visibility services include a base analytics capability for analyzing up to 30 days of data, which enables you to simplify the process of extracting network insights across your enterprise. If you require dynamic insights like motion paths* and other third-party* data and would like the option of customized reports, the Juniper Mist Premium Analytics service is available as an additional subscription. Juniper Mist Edge Juniper Mist Edge is an on-premises appliance that runs a tunnel termination service. Juniper APs offer a flexible data plane. Traffic can be broken out locally, or tunneled to Juniper Mist Edge. There are many use cases the Juniper Mist Edge solves, including seamless mobility in large campus environments, tunneling of guest traffic to a DMZ, IoT segmentation, and teleworker. Learn more about Juniper Mist Edge. 4 AP34 Access Point Datasheet Specifications Wi-Fi Standard 802.11ax (Wi-Fi 6), including support for OFDMA, 1024-QAM, MU-MIMO, Target Wake Time (TWT), Spatial Frequency Reuse (BSS Coloring). Backwards compatibility with 802.11a/b/g/n/ac Combined Highest 2.4 GHz / 5 GHz: 1.8 Gbps Supported Data Rates +6 GHz: 4.2Gbps 2.4 GHz 2x2 : 2 802.11ax up to 575 Mbps data rate 5 GHz 2x2 : 2 802.11ax up to 1,200 Mbps data rate 6GHz 2x2 : 2 802.11ax up to 2,400 Mbps data rate MIMO Operation Two spatial stream SU-MIMO for up to 1200 Mbps wireless data rate to individual 4x4 HE160 Two spatial stream MU-MIMO for up to 1200 Mbps wireless data rate to up to four MU-MIMO capable client devices simultaneously Dedicated Fourth Radio 2.4GHz, 5GHz, and 6GHz tri-band WIDS/WIPS, spectrum analysis, synthetic client and location analytics radio Internal Antennas (AP34) Two 2.4GHz omnidirectional antennas with 4 dBi peak gain Two 5GHz omnidirectional antennas with 6 dBi peak gain Two 6GHz omnidirectional antennas with 6 dBi peak gain *Subject to change Bluetooth 5.1 Omni Bluetooth Antenna Beam Forming Transmit Beamforming and Maximal Ratio Combining Power Options 802.3at PoE, 802.3bt PoE *Reduced functionality on 802.3at / 802.3bt Boot up mode on 802.3af Dimensions 230mm x 230mm x 50mm Shipping Box 289mm x 268mm x 191mm Operating Temperature Internal antenna: 0° to 40° C Operating Humidity 10% to 90% maximum relative humidity, non- condensing Operating Altitude 3,048m (10,000 ft) Trusted Platform Module (TPM) Includes a TPM for infrastructure security Eth0 Reset Indicators Traffic Forwarding Options 100/1000/2500/5000Base-T (802.3bz); RJ45; PoE PD Reset to the factory default settings One multicolor status LED Eth0, Juniper Mist Edge Mounting Brackets APBR-U* APBR-ADP-M16 APBR-ADP-T58 APBR-ADP-CR9 APBR-ADP-RT15 APBR-ADP-WS15 APBR-ADP-T12 Universal bracket 16mm threaded rod (M16-2) 3/8" Threaded Rod 9/16" T-Rail, Channel Rail 15/16" T-Rail 1-1/2" T-Rail 1/2" threaded rod *The AP package includes one Universal Bracket. APBR-U is available separately as an accessory. About Juniper Networks At Juniper Networks, we are dedicated to dramatically simplifying network operations and driving superior experiences for end users. Our solutions deliver industry-leading insight, automation, security and AI to drive real business results. We believe that powering connections will bring us closer together while empowering us all to solve the world's greatest challenges of well-being, sustainability and equality. Ordering Information US/FCC Domain Rest of the World AP34-US (Internal Antenna) AP34-WW (Internal Antenna) I/O and Indicators IoT Sensors USB Temperature USB 2.0 support interface, 900 mA output Corporate and Sales Headquarters Juniper Networks, Inc. 1133 Innovation Way Sunnyvale, CA 94089 USA Phone: 888.JUNIPER (888.586.4737) or +1.408.745.2000 www.juniper.net APAC and EMEA Headquarters Juniper Networks International B.V. Boeing Avenue 240 1119 PZ Schiphol-Rijk Amsterdam, The Netherlands Phone: +31.207.125.700 Copyright 2023 Juniper Networks, Inc. All rights reserved. Juniper Networks, the Juniper Networks logo, Juniper, and Junos are registered trademarks of Juniper Networks, Inc. in the United States and other countries. All other trademarks, service marks, registered marks, or registered service marks are the property of their respective owners. Juniper Networks assumes no responsibility for any inaccuracies in this document. Juniper Networks reserves the right to change, modify, transfer, or otherwise revise this publication without notice. 1000691-002-EN Feb 2023 5