01 Product Description
- Made of high-strength steel
- High precision pressure sensor for up to 75 KG
- 16-bit high precision angle sensor
- Braking pressure sensor and angle sensor fusion algorithm
- Braking spring and damping block combined
- Adjustable pedal spacing
- Detachable pedal design
- Compatible with floor and professional cockpit brackets
- Pedal travel software adjustment
02 Pedal Installment
- Place the pedals on the footrest. Use a 2.5mm hexagon wrench to fix the M4*10 screws to the footrest. It is recommended that all 4 screws of each pedal are tightened to ensure stability.
- Connect the wires to the corresponding ports. The connecting wire of the clutch angle sensor needs to pass through the middle of the brake base to prevent it from being pressed by the wire harness after installing the pedal. Use the wire clips under the pedal base to secure the wire harness and prevent wear or tangling during intense driving.
- Connect the USB cable to the computer. You will see the status of the SRP pedal in the MOZA Pit House software. If the pedal remains gray or does not respond, unplug the USB port on the PC, turn off the MOZA Pit House, reconnect the USB port, and turn on the MOZA Pit House again.
- You can check the working status of the pedal and reset the pedal starting point, ending point, and pedal travel in the MOZA Pit House software.
Port Connections: The diagram shows the pedal layout with the following connection ports:
- Clutch angle sensor port
- USB connection port (connected to the computer)
- Brake pressure port
- Brake position sensor port
- Throttle position sensor port
03 How to Adjust Pedal Spacing
Move the pedals left and right to adjust the spacing between the pedals and the base holes. Select the appropriate screw hole and then tighten the screw. This adjustment method is the same for the accelerator, brake, and clutch pedals.
[Diagram description: Visual representation of pedals being shifted horizontally relative to their mounting base.]
04 Instructions for Adjusting Pedal Board Height
Use a 2.5mm hexagon wrench to turn the screws on the pedal board surface counterclockwise. Use a 7mm open-end wrench to remove the nuts on the back and the screws on the board. Move the pedal board up and down to adjust the height according to your needs, then fasten the nuts and screws securely to the board surface. This adjustment method is the same for the accelerator, brake, and clutch pedals.
[Diagram description: Visual representation of the pedal plate being moved vertically for height adjustment.]
05 Packing Details
The package includes:
- 1. SRP pedal
- 2. Tool kit:
- M4*10 socket head countersunk head screws x12
- M8*12 hexagon socket head screws x3
- M6*20 socket head cap screws x2
- 2.5mm hexagon wrench x1
- 7mm open end wrench x1
- 5mm hexagon wrench x1
- 3. Type A to Type B USB cable
[Diagram description: Visual representation of the included pedals, tools, and USB cable.]
06 Product Parameters
| Parameter | Specification |
|---|---|
| Material | High-strength steel |
| Color | Black |
| Brake sensing method | Pressure sensor and angle sensor fusion algorithm |
| Pressure sensor maximum range | 75kg |
| Angle sensor resolution | 16 bits |
| Brake structure | Spring + damping block |
| Throttle sensing method | Angle sensor |
| Clutch sensing method | Angle sensor |
| Pedal spacing | Adjustable |
| Pedal surface height | Adjustable |
| Pedal connection port | USB |
| Pedal travel software adjustment | Yes |
| Pedal travel reverse function | Yes |
Product Warranty
Warranty Card:
- Product Model: [Field for Product Model]
- User Name: [Field for User Name]
- Communication Address: [Field for Address]
- Purchase Date: [Field for Purchase Date]
- Dealer Information (Stamp): [Field for Dealer Information]
- Warranty Period: [Field for Warranty Period]
- Product Barcode: [Field for Product Barcode]
Warranty Terms:
From the date of purchase, the base unit, steering wheel, pedals, and instrument display are warranted for 12 months. The device casing, manual, cables, screws, wrenches, and packaging are not covered under the "one-year free warranty service" but are available for paid service. Purchasers will not receive free warranty service under the following conditions:
- Exceeding the validity period of the three guarantees.
- Lack of the three guarantees certificate and valid invoice, except when the product's validity period can be proven.
- The model on the warranty certificate does not match the repaired product model or has been altered.
- Damage caused by disassembly by personnel not authorized by the company.
- Damage caused by force majeure.
- Damage caused by failure to use, maintain, or service the product according to the user manual requirements.
The warranty period may vary due to product parts and different national laws and regulations. For warranty periods in specific countries and regions, please consult MOZA official or the authorized MOZA dealer you contacted at the time of purchase.
[Visual indicator: "QC PASS" stamp is present.]
Product Dimensions and Material
Dimensions: 126*180mm
Material (of the manual): 80G writing paper
