Blackview Active 6 Series User Manual and Safety Guide

Device Overview

The Blackview Active 6 Series device features the following components:

Buttons: Volume Up, Volume Down, Power Button.
Ports: USB Type-C Port, 3.5mm Headphone Jack.
Slots: SIM/TF Card Slot.
Features: Speaker, Microphone, Front Camera, Rear Camera, Flashlight, Screen.

Hand Strap Installation

To install the hand strap:

Fit the screws pre-installed on the two ends of the hand strap into the corresponding nuts on the back of the device.
Use a screwdriver to tighten the screws to complete the installation.

SIM Card Installation

To ensure your device can make calls, insert the SIM card as follows:

Open the SIM card tray plug.
Press the card pin into the side hole to eject the SIM card tray.
Take out the card slot. Place the Nano SIM card or Nano SIM card and TF card with the metal side facing down. Ensure the bevel angle of the card aligns with the bevel angle of the card slot and place it in the corresponding slot.
With the device facing up, insert the card holder into the device in the direction of the arrow.

Supported configurations include SIM 1, SIM 2, or SIM 1 + TF Card.

How to Boot

For devices with a non-removable battery, press and hold the Power Button for 3-5 seconds to boot the device.

Sending SMS and MMS

SMS:

Open the SMS application.
Select "New Message".
Enter a phone number or select from contacts.
Select "Edit Message" and enter your text.
Tap "Send".

MMS (Multimedia Messaging Service):

When composing a text message, you can select images, videos, or other files to attach. You can also take a new picture or video directly.

Language Switching

To change the device language:

Navigate to Main Menu > Settings > System Settings > Language and input method.
Select "Language and input method" > "Language".
Tap "Add language" and select your desired language. The system will automatically switch to the selected language interface.
Drag the icon next to the language to the first position to set it as the primary language.

SAR Information

The maximum Specific Absorption Rate (SAR) for this product is ≤2.0W/kg, in line with the national standard GB 21288-2007.

Safety Instructions

To ensure safe usage, strictly adhere to the following rules:

Keep the device at least 15 cm away from any medical implants or pacemakers. Never store the device in a coat pocket.
Do not expose the device and batteries to high temperatures or heat-generating equipment (e.g., sunlight, heaters, microwave ovens, ovens, water heaters). Overheating can cause explosions.
Disconnect the charger from the device and unplug it from the power outlet when charging is complete or not charging.
If the device has a non-removable battery, do not attempt to replace it yourself to avoid damaging the battery or device.
Using unapproved or incompatible power sources, chargers, or batteries may cause fire, explosion, or other hazards.
Do not disassemble, reset, puncture, immerse in water, or expose the battery to other liquids. Avoid internal short-circuits and overheating.
Do not drop, crush, scratch, or puncture the battery to prevent excessive external pressure.
The company is not responsible for accidents caused by non-standard charging equipment.
For full CE compliance information, visit: http://www.blackview.hk/ce/

Maintenance

Proper maintenance ensures safe and effective use and extends the device's service life.

Follow the instructions in the manual for opening the device and disassembling accessories. Do not use alternative methods.
Avoid dropping, knocking, or shaking the device. Rough handling can damage the screen, internal circuitry, and delicate structure.
Do not use chemical solvents or detergents. Clean the device casing with a soft cotton cloth dampened with water or mild soap.
Clean lenses (e.g., camera lens) and the display with a clean, dry, soft cloth.
Troubleshooting: If the device crashes or behaves abnormally:
- For devices with non-removable batteries: Press and hold the Power Button for more than 12 seconds to force a restart.
- For devices with removable batteries: Remove and reinsert the battery, then restart.
When the charger is not in use, unplug it from the power outlet. Avoid connecting a fully charged battery to the charger for extended periods, as overcharging can shorten battery life.

	Blackview Tab 11 WiFi Series User Manual A comprehensive guide to the Blackview Tab 11 WiFi Series, covering setup, features, and safety information. Learn how to insert SIM/TF cards, boot the device, send messages, change languages, and understand SAR values.
	Blackview Tab 9 Series User Manual User manual for the Blackview Tab 9 Series tablet, covering setup, basic operations, safety precautions, and maintenance.
	Blackview Tab 15 Series User Guide This guide provides information on using the Blackview Tab 15 Series tablet, including setup, basic operations, safety precautions, and maintenance.
	Blackview Active 8 Pro User Manual and Safety Guide This guide provides essential information for operating and maintaining your Blackview Active 8 Pro tablet, covering hand strap installation, SIM card setup, device operation, safety precautions, and maintenance for optimal and safe usage.
	Blackview Active 8 PRO User Manual User manual for the Blackview Active 8 PRO tablet, covering setup, important safety instructions, device controls, SIM card insertion, powering on/off, making calls, sending messages, battery disposal, charging, and declaration of conformity.
	Blackview Tab 8 WiFi Series User Manual: Setup, Safety, and Specifications A comprehensive user guide for the Blackview Tab 8 WiFi Series tablet, detailing setup, safety precautions, maintenance, RF specifications, and regulatory compliance.
	Blackview Active 8 Series User Manual Explore the features and usage of the Blackview Active 8 Series tablet with this comprehensive user manual. Learn about setup, maintenance, safety guidelines, and regulatory information.
	Blackview TAB 60 User Manual: Features, Safety, and Maintenance Comprehensive user manual for the Blackview TAB 60, detailing its features, safety guidelines, maintenance procedures, and regulatory compliance. Learn how to insert TF cards, boot the device, switch languages, and understand SAR information.