Important Safeguards
General Safety
- Only use the humidifier as described in this manual.
- When not in use for an extended period, turn the humidifier off and disconnect the plug from the outlet.
- Do not use the humidifier in wet environments.
- Keep the humidifier out of reach from children.
- Do not attempt to disassemble the humidifier or its components.
- Always unplug the humidifier from power before cleaning it or detaching the water tank from the humidifier base.
- Always place the humidifier on a flat, horizontal surface before using.
- Only fill the water tank with clean water. Never fill the water tank with any other liquids.
- Do not place the humidifier near heat sources such as stovetops, ovens, or radiators.
- Do not place the humidifier directly on carpets or rugs.
- Do not use non-Clevast humidifier parts as replacement parts for this product.
- Do not cover the nozzle while the humidifier is on, as this may damage the humidifier.
- Do not immerse the humidifier base, power cord, or power plug in water.
- If the humidifier is damaged or is not functioning properly, stop using it and contact Customer Support immediately.
- The excess of moisture may wet the surface where the humidifier is placed.
- If the supply cord is damaged, it must be replaced by the manufacturer, its service agent or similarly qualified persons in order to avoid a hazard.
- Be aware that high humidity levels may encourage the growth of biological organisms in the environment.
- Do not permit the area around the humidifier to become damp or wet. If dampness occurs, turn the output of the humidifier down. If the humidifier output volume cannot be turned down, use the humidifier intermittently. Do not allow absorbent materials, such as carpeting, curtains, drapes, or tablecloths, to become damp. Never leave water in the reservoir when the appliance is not in use.
- Empty and clean the humidifier before storage. Clean the humidifier before next use.
- Not for commercial use. Household use only.
Getting to Know Your Smart Humidifier
Product Features
From the user's standpoint, this humidifier utilizes a method that enables water to be added to the upper cover, providing convenience during the process of replenishing water. The upper cover can be effortlessly detached, facilitating hassle-free refilling. Furthermore, it incorporates smart control features with a built-in Wi-Fi, allowing for seamless integration with the Clevast app. Through the app, users can remotely control the device, set automatic on/off functions based on desired humidity levels, and monitor changes in air humidity data. Importantly, it is equipped with an independent aromatherapy essential oil box, effectively preventing water tank contamination issues.
Product Diagram
The product diagram illustrates the following components:
- 1. Fog Outlet
- 2. Water Tank Cover
- 3. Water Tank
- 4. Base
- 5. Gear Button
- 6. Wi-Fi Indicator Light
- 7. Power Switch
- 8. Wi-Fi Switch
- 9. Aroma Box
- 10. Power Cord and Plug
Touch Control Panel
The humidifier features touch controls for Power, Wi-Fi, and Gear functions.
| Control | Action | Indicator/Status |
|---|---|---|
| Power Switch [Power] | Press once: Power on. Press again: Shut down. | Light goes off and humidifier stops working. |
| Wi-Fi Switch (Wi-Fi) | Press and hold for 3s: Enter pairing mode. | Wi-Fi indicator light flashes blue. |
| Connect to wireless network via Clevast app. | Wi-Fi indicator light stays solid blue when connected. | |
| Offline/unbinding status. | Wi-Fi indicator light flashes blue slowly. | |
| Network pairing status. | Wi-Fi indicator light flashes blue quickly. | |
| Gear Button [Gear] | Press 1 time: Small gear. | Gear indicator light orange-pink. Enters breathing light after 15 seconds of no operation. |
| Press the second time: Large gear. | Gear indicator light grass green. Enters breathing light after 15 seconds of no operation. | |
| Lack of water. | Gear button flashes red light. Humidifying resumes after adding water within 40 seconds. If not refilled, unit beeps three times and shuts down. |
Other Functions
- Water Shortage Function: The unit stops humidifying and the fan stops working after 5 seconds when water is low. The gear indicator light flashes red. Operation resumes upon adding water within 40 seconds. If not refilled, the unit beeps three times and shuts down.
- Anti-Dry Burn Function: If the water level float is stuck or the water level plate is not functioning and there is no water, the unit enters anti-dry mode, beeps three times, and shuts down.
- Voice Control: Users can control the unit via voice command using Google Assistant and Amazon Alexa.
Specifications
| Item | Details |
|---|---|
| Model No. | CL-HD01 |
| Rated Power | H: 35W±10%, L: 26W±10% |
| Humidification | H: >200ml/h, L: 100ml/h±20% |
| Tank Capacity | 3L |
| Product Size | Approx. 7.26*11.81in / 18.45*30cm |
| Weight | 2.87lb / 1.3kg |
Before First Use
- Remove all packaging.
- Take the water tank off of the base and remove all tape, including any tape on the float.
- Rinse and reassemble all parts before first use.
- Place the humidifier on a hard, flat surface with at least 12 inches/30cm clearance on all sides. The surface must be water-resistant.
- Mist should be directed away from walls, furniture, bedding, and appliances.
Operating Instructions
Fill With Water
Ensure the unit is unplugged before filling. Water can be added using one of two methods:
Method a: Removing the top cap and adding water directly to the tank.
Step 1: Unit unplugged, top cap removed.
Step 2: Water being poured into the tank.
Step 3: Top cap replaced.
Method b: Removing the water tank from the base and filling it.
Step 1: Top cap removed, water tank lifted off base.
Step 2: Water tank filled.
Step 3: Water tank placed back on base.
Note:
- We recommend using purified or distilled water to fill the tank.
- Do not fill past the tank's max water line.
Add Aromatherapy
Add essential oils only to the aroma box. Do not add essential oils directly into the humidifier.
A red cross (❌) indicates incorrect placement, while a green checkmark (✔️) indicates the correct placement of essential oils in the aroma box.
Reattach the water tank cover and place the tank back on the base
When cleaning, the straight tube inside the humidifier can be removed by rotating it counterclockwise and reinserted by rotating it clockwise.
Using Your Smart Humidifier
Functions & Controls
- Plug the humidifier into power. Press the power switch [Power] once to start the humidifier.
- Press the gear button [Gear] to confirm the working status. Pressing it once sets a small gear with an orange-pink indicator light. Pressing it a second time sets a large gear with a grass green indicator light. Both enter a breathing light state after 15 seconds of no operation.
- Turn on the Wi-Fi switch (Wi-Fi) and use the Wi-Fi function to control the humidifier.
Clevast App Setup
Downloading the Free Mobile App
To download the Clevast App, scan the provided QR code or search for "Clevast" in the Apple App Store® (iOS) or Google Play Store (Android).
Pairing with Clevast App
- Turn on your smartphone's Bluetooth (?) and Wi-Fi (?).
- Open the Clevast App. Create a new account by tapping 'Sign Up'. Note: A Clevast account is required for third-party services and products. It also allows family and friends to control the humidifier.
- Touch the device icon and follow the in-app instructions to complete the pairing process.
- Distribution mode: After pressing the power button, press and hold the Wi-Fi button for 3 seconds until the Wi-Fi indicator flashes blue quickly. Click 'Add Device' and select the model (e.g., "E03-HD01-WTUS"). The device distribution network is timely for 2 minutes.
- Select your 2.4GHz Wi-Fi network, enter your Wi-Fi password, and confirm if your Wi-Fi requires a password. Click 'Connect'.
- The device will start networking. Keep the device close to your phone during this process.
- Wi-Fi connection is successful. Click 'Done'.
- Device Name: Give your device a unique name and click 'Save' or 'Setting Later'.
App Function Interface
The Clevast App interface allows users to monitor and control the humidifier. Key functions include:
- Favorite Button: Bookmark the product.
- Humidity Level Setting: Set the desired mist level.
- Target Humidity: Set your ideal humidity level.
- Timer Settings: View the running time of the humidifier.
- Schedule Settings: Set specific times for the humidifier to turn on and desired fog level/target humidity.
- Custom Settings: Customize the humidifier's state for activation at any time without resetting.
- ON/OFF: Turn the humidifier on or off.
Troubleshooting
This section addresses frequently asked questions for the humidifier. If problems persist, contact customer support.
For Smart Humidifier
| Problem | Possible Solution |
|---|---|
| Humidifier doesn't turn on. | Make sure the power cable is securely connected and press the Power Button again. |
| Add at least 1L of purified or distilled water into the water tank. | |
| Few or no mist comes out. | Turn the mist level to a higher setting. |
| There may be too much water in the base chamber. Empty the base chamber and refill the water tank (not the base chamber), then place the water tank properly onto the base. | |
| Make sure the air inlet on the bottom of the base is not blocked. The humidifier should not be set on carpet or other surfaces that may block the air inlet. | |
| Make sure the nozzle is not blocked or clogged. | |
| The water temperature may be too low. Turn the mist level to the highest setting, let the humidifier run for a while, then adjust to the desired setting. Use room temperature water. | |
| The water usage of the humidifier is too fast. | If the water tank or base was washed with detergent, rinse thoroughly with clean water to remove any detergent. The humidifier uses water based on environmental temperature and humidity. If your environment is cold and/or dry, the humidifier will run out of water faster. |
| Humidifier produces an unusual smell. | If the humidifier is new, unplug and rinse all parts, then place in a cool dry place for 12 hours. If essential oils were placed on the aroma pad, rinse the pad using clean water and allow it to dry. Clean the water tank and base chamber. |
| Humidifier makes a loud or unusual noise. | Set the mist level to a lower setting. The humidifier may be malfunctioning; stop using it and contact Clevast Customer Support. |
| White dust appears around the humidifier. | We recommend using purified or distilled water to fill the humidifier. Avoid using water with high mineral content. |
| Water leaks from the humidifier. | Make sure the silicone sealing ring around the water outlet valve is secure. Avoid running the humidifier in a room with over 60% relative humidity. Do not shake the humidifier. Make sure to place the humidifier on a flat, level surface. Check the water tank for leaks. If there are leaks, contact Clevast Customer Support. Make sure the float in the tank is in place and is correctly installed. |
| Condensation forms around humidifier or windows. | Humidity may be too high. Turn down the mist level, turn off the humidifier, or open a door or window to the room. |
| Mold grows inside the humidifier. | Clean the water tank and base chamber regularly. |
| Indicator light blinks red or bright red. | Fill the water tank. Place the water tank properly on the base. |
| Essential oil has little or no smell. | Add more essential oil. For best results, use pure essential oil. |
| Only a little humidification effect. | The room may be larger than the humidifier's effective range. Use in a room smaller than 250 sq ft. |
For App & Connectivity
- Cannot connect to the Clevast App:
- Make sure the Bluetooth of your smartphone is enabled and your smartphone is not connected with other Bluetooth devices.
- Enable the smartphone's Location Services.
- Try connecting with another smartphone.
- Make sure your app is the latest version.
- Make sure your smartphone is connected to the 2.4GHz network and confirm the network is working correctly.
- Make sure the Wi-Fi password you entered is correct.
- Shorten the distance between the humidifier, Wi-Fi router, and the smartphone.
- Make sure your humidifier and Wi-Fi router are away from appliances that produce electromagnetic radiation (e.g., microwave ovens, refrigerators).
- If using a VPN, try turning it off. Disable portal authentication for your wireless network if enabled, as it prevents access.
- Cannot find the humidifier within the nearby Bluetooth devices list: The humidifier may be connected with another smartphone. Disconnect it first.
- The humidifier is offline:
- Ensure the humidifier is plugged in and powered on, then refresh "My Devices" in the Clevast app.
- Make sure your router is connected to the internet and your phone's network connection is working.
- If the Wi-Fi password has changed, the humidifier will go offline. Try connecting it to the network again.
- Delete the offline humidifier from the Clevast App, then add and reconfigure it.
FCC Statement
This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions:
- This device may not cause harmful interference.
- This device must accept any interference received, including interference that may cause undesired operation.
Any changes or modifications not expressly approved by the party responsible for compliance could void the user's authority to operate this equipment.
This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one of the following measures:
- Reorient or relocate the receiving antenna.
- Connect the equipment into an outlet on a circuit different from that to which the receiver is connected.
- Increase the separation between the equipment and receiver.
- Consult the dealer or an experienced radio/TV technician for help.
FCC Radiation Exposure Statement
This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End users must follow the specific operating instructions for satisfying RF exposure compliance. To maintain compliance with FCC RF exposure compliance requirements, please follow operation instructions as documented in this manual. This transmitter must not be co-located or operating in conjunction with any other antenna or transmitter. This equipment should be installed and operated with a minimum distance of 20cm between the radiator and your body. The availability of some specific channels and/or operational frequency bands are country dependent and are firmware programmed at the factory to match the intended destination. The firmware setting is not accessible by the end user.
Warranty Information
CLEVAST grants a 1-year warranty on the product commencing on the date of purchase. Within the guarantee period, CLEVAST will eliminate any defects in the appliance resulting from faults in materials or workmanship. Please contact support@clevast.com to launch a warranty claim.
This guarantee does not cover: damage due to improper use, normal wear or use, as well as defects that have a negligible effect on the value or operation of the appliance. The guarantee becomes void if repairs are undertaken by unauthorized persons and if original product parts are not used.
Customer Support
- If you have any product questions or concerns, please don't hesitate to contact CLEVAST directly at support@clevast.com or visit their website at: www.clevast.com.
- CLEVAST offers a hassle-free warranty and customer service team for satisfactory solutions to any issue you might have.
