Smart Aromatherapy Diffuser - Operation and Maintenance

Function Keys

• MODE: Adjusts different functions including current time, 5 working periods, work/pause intervals, and aroma concentration. Long press for 10 seconds to restore factory settings.
• SET: Initiates program settings for time, date, and aroma concentration. Long press for 10 seconds to lock/unlock settings.
• UP: Increases function values (time, concentration, working days). Press and hold for 3 seconds to turn the fan on/off.
• DOWN: Decreases function values (time, concentration, working days).

Bluetooth Models Specifics

• Bluetooth model indicator light: Green light indicates working, red light indicates pause, blue flashing light indicates Bluetooth setup. (Conventional model: working light is always green, off when stopped).
• Oil volume level indicator light: Green light indicates 100%-50% oil level. Blue light indicates 50%-10% oil level. Red light indicates less than 10% oil level, requiring a refill.
• Bluetooth: Displayed when connecting.
• Oil level: Displays the current oil level.
• Lock/unlock: Indicates the lock status.

Function keys are the same as conventional models. When restoring factory settings, key settings are default. Bluetooth connection takes priority.

System Time Setting

1. Press [SET]. The hour figure on the LCD will flash. Use [UP/DOWN] to adjust the hour.
2. Press [SET] again. The minute figure will flash. Use [UP/DOWN] to adjust the minutes.
3. Press [SET] a third time. The indicated date will flash. Use [UP/DOWN] to adjust the current date.
4. Press [SET] a fourth time to finish all settings.

Set Working Periods (5 groups)

Setting Working Time Ranges:

1. Press [MODE] to cycle through settings. The LCD shows the factory-set time. You can set 5 working time periods. Example: 08:00-10:00, 11:00-12:00, 13:00-14:00. For continuous operation over midnight, set two periods, e.g., 08:00-23:59 and 00:01-06:00.
2. Setting Start Time: Press [SET] to enter start time setting. The hour flashes; use [UP/DOWN] to adjust. Press [SET] again for minutes; use [UP/DOWN] to adjust. Press [SET] a third time to set the week. Use [UP] to display the 'Δ' symbol for selected working days in the top week column. Use [DOWN] to move right for other week combinations.
3. Setting End Time: Press [MODE] to set the end time range. Press [SET] to adjust the end hour, then press [SET] again to adjust the end minute.
4. Setting Aroma Concentration: Press [MODE] to set device work density. Use [UP/DOWN] to adjust density (5s to 300s).
5. Setting Pause Density: Press [MODE] to set device pause density. Use [UP/DOWN] to adjust density (5s to 300s, minimum 20s for pause).

After setting, continue pressing [MODE] to set the next period or return to the LCD home page.

Replace the Atomization Core

The atomization head includes: oil bottle, oil suction pipe, filter, atomization core, regulating valve. Remove the oil bottle, detach the regulating valve and pull out the suction pipe. Remove the old atomization core and insert the new one into the main body of the atomization head. Install the regulating valve. Align the oil suction pipe with the small hole in the atomization core and press firmly.

Diagram Description: A sequence of illustrations showing the disassembly and reassembly of the atomization head, including removing the bottle, separating the spray head, replacing the core and suction pipe, and reattaching the bottle.

Replace the Small Hole Regulating Valve (Reduces Atomization)

Remove the oil bottle, detach the regulating valve, and pull out the suction pipe. Insert the small hole regulating valve into the atomization core, ensuring correct alignment. Align the oil suction pipe with the small hole of the regulating valve and press firmly.

Diagram Description: Illustrations showing the process of replacing the standard regulating valve with a small-hole version, emphasizing correct alignment and reattachment of the suction pipe and bottle.