Vaporesso XROS PRO Pod Kit
Your guide to the Vaporesso XROS PRO, a powerful and versatile pod system designed for an enhanced vaping experience.
Package Contents
- 1x XROS PRO Battery
- 2x XROS Pod Series Mesh Cartridge 3ml 0.4ohm
- 1x USB-C Cable
Specifications
- Dimensions: 24.4 x 18.45 x 119.7mm
- Cartridge Capacity: 3ml
- Battery Capacity: 1200mAh
- Charging: USB-C, 2A
- Adjustable Output Power: Up to 30W
Device Components
The XROS PRO features a user-friendly design with the following components:
- Mouthpiece
- Filling Port
- FIRE Button (Power/Activation Button)
- Lock
- Lock Indicator
- 0.42" OLED Display
- LED Indicator
- USB-C Port
- Airflow Adjustment
Operation Guide
Pod Replacement
- Remove the old POD from the device.
- Remove the protective film from the new POD.
- Insert the new POD into the device.
Powering On/Off
Press the FIRE button 5 times quickly in succession to turn the device on or off.
Vaping
Inhale through the mouthpiece or press the FIRE button to activate.
Airflow Adjustment
Adjust your desired airflow by using the slider located on the side of the device.
Charging
Connect the device via the USB-C cable to a computer or power adapter. The display will show the battery status.
LED Indicator Status
| LED Color | Battery Status |
|---|---|
| Green | 70-100% |
| Blue | 30-70% |
| Red | 0-30% |
Filling the Pod
- Remove the mouthpiece from the cartridge.
- Gently insert the tip of your e-liquid bottle into the filling port.
- Insert and squeeze the e-liquid through the port.
- Reattach the mouthpiece, ensuring it is properly seated.
- After filling, let the cartridge stand for 5 minutes to allow the coil to saturate with e-liquid.
Device Protections
The XROS PRO includes several safety features indicated by the LED and device behavior:
- Low Resistance / Short Circuit / High Temperature: The red LED will flash 5 times, and the device will stop working.
- Open Circuit / High Resistance: The current battery status will flash 5 times, and the device will stop working.
- Low Voltage / Undercharge: The red LED will flash 3 times, and the device will stop working.
- Overcharge: The green LED will remain lit, and the device will stop charging.
- Over-vaping Protection: If vaping exceeds 8 seconds, the device will turn off, and the LED will flash green-blue-red.
Locking/Unlocking
Use the slider on the side of the device to lock or unlock it. The power on/off function will remain active.
Clearing Puff Counter
Press the FIRE button 4 times quickly in succession to clear the puff counter.
Power Adjustment
- For resistances >= 0.6ohm: Press the FIRE button 3 times quickly to select between Normal, Eco, or Power modes. Confirm your selection by waiting 3 seconds.
- For 0.4ohm resistances: Press the FIRE button 3 times quickly to select the wattage output.
LED Light Effect
Press the FIRE button 2 times quickly in succession to turn the LED indicator on or off.
Safety Precautions
- Do not disassemble the battery.
- Avoid exposing the device to extreme temperatures.
- Keep the battery dry.
- Do not throw or drop the device, as it may cause damage.
Warnings
- Turn off the device when not in use.
- Do not attempt to repair the device yourself, as this may lead to damage or injury.
- Use the device only for vaping. Do not ingest e-liquid.
- Keep out of reach of persons under 18 years of age. This product is not intended for individuals under 18, pregnant or breastfeeding women, diabetics, individuals with high blood pressure or cardiovascular problems, or those allergic to any of the components. The product is not recommended for young people or non-smokers.
- Do not use the device in windy or dusty environments. Avoid placing the device in pockets or bags with other items (e.g., coins, jewelry, hard objects). Disconnect the device after charging. Do not charge the device near flammable materials or objects.
Side Effects: Headache, dizziness, dry mouth, nose, or throat. The device itself is neither addictive nor toxic. Information regarding addictiveness and toxicity can be found on the packaging and in the leaflet for the E-liquid used.
Importer Information
Importer: 2Hservice s.r.o.
Address: Křivenická 444/33, Praha, Czech Republic
Website: www.mastervaper.cz
Phone: +420704471130
