Brian Edstrom
2015 Volume7 BuyersGuide hires 95
NEW PRODUCTS
NEW POWER
SUBWOOFER
AMPLIFIERS READY FOR THE ELEMENTS
POWERPUNCH
7MARINE SOURCE UNITS & REMOTES
NEW POWER SLIM
BUYER'S GUIDE CONTENTS
27
7 MOBILE AMPLIFER FAMILIES
15 TECHNOLOGIES AMPLIFIER
17 LINE UP AMPS COMPARED
19 GUTS OF AN AMPLIFIER
27 MOBILE SUBWOOFER FAMILIES
35 TECHNOLOGIES SUBWOOFER
51
37 LINE UP SUBS COMPARED
40 ANATOMY OF A SUBWOOFER
51 MOBILE SPEAKER FAMILIES
59 TECHNOLOGIES SPEAKER
61 LINE UP SPEAKERS COMPARED
63 FRAMEWORK
85
OF A SPEAKER
75 VEHICLE INTEGRATION PRODUCTS
85 MOTO/MARINE AMPLIFER FAMILIES
94 GUTS OF AN AMPLIFIER
99 MOTO/MARINE SUBWOOFER FAMILIES
103 ANATOMY OF A SUBWOOFER
117
107 MOTO/MARINE SPEAKER FAMILIES
111 FRAMEWORK OF A SPEAKER
117 MOTO/MARINE SOURCE UNITS AND WIRED REMOTES
121 DNA OF A SOURCE UNIT
127 MOTORCYCLE AUDIO PRODUCTS
©2015 Rockford Corporation. All Rights Reserved. ROCKFORD FOSGATE®, PUNCH®, 3SIXTY® and associated logos where applicable, are registered trademarks of Rockford Corporation in the United States and/or other countries. iPhone and iPod are trademarks of Apple Inc., registered in the U.S. and other countries. The Bluetooth® word mark and logos are registered trademarks owned by Bluetooth SIG, Inc. and any use of such marks by Rockford Corporation is under license. The word Harley-Davidson® is a registered trademark of Harley-Davidson, Inc. and is for reference only. The BMW® name is a registered trademark and is for reference only. All other trademarks are the property of their respective owners. Specifications subject to change without notice. "Made for iPod" and "Made for iPhone mean that an electronic accessory has been designed to connect specifically to iPod, iPhone, or iPad, respectively, and has been certified by the developer to meet Apple performance standards. Apple is not responsible for the operation of this device or its compliance with safety and regulatory standards. Please note that the use of this accessory with iPod, iPhone, or iPad may affect wireless performance.
AMPLIFIERS SUBWOOFERS SPEAKERS
AAMMPPLILFIIEFRISERS
UNPRECEDENTED POWER AND CONTROL
YEAR OHMS
dB/OCT
YEAR
12/24 CROSSOVER SLOPE
2
+1 LIMITED
WARRANTY
FREE* EXTENDED WARRANTY
2/1 IMPEDANCE STABILITY
HISTORY OF PERFORMANCE
dB/OCT
12 CROSSOVER SLOPE
YEAR
1 +1 LIMITED WARRANTY
YEAR
FREE* EXTENDED WARRANTY
OHMS
4/2 IMPEDANCE STABILITY
dB/OCT
YEAR OHMS
THE PERFECT FIRST STEP
12 CROSSOVER SLOPE 1 LIMITED WARRANTY
4/2 IMPEDANCE STABILITY
*WITH QUALIFYING ROCKFORD FOSGATE INSTALLATION KIT PURCHASE
DELIVERING UNPRECEDENTED POWER AND CONTROL
A culmination of over 30 years of pushing the envelope in amplifier design, the Power series of amplifiers takes everything that we've learned about power output and heat management and puts it into a single package.
With technologies such as our Class AD and BD constant power circuits, Rockford engineers squeeze every drop of power out of these amps they can get. So, not only will your system be the envy of all your friends because it's the
loudest, but it's going to sound amazing to boot. Heat management is always a concern. Too much heat will not only shut down your amp but may eventually kill it. We combat this by using specially designed cast aluminum heat sinks as well as our latest Dynamic Thermal Management circuitry to maximize performance while managing the heat production. Simply put, a cooler amp is a happy amp and will run for a very long time.
MODELS SHOWN | T400-2, T2500-1bdCP, T400-4, T1000-4ad
9
2015 BUYER'S GUIDE
ALL THE POWER, HALF THE SPACE
After seeing a demand in the marketplace for small chassis amplifiers, our engineers took amplifier design to the next level. They designed amplifiers that could fit in small spaces but also deliver on power and performance. The goal set was to take the elements of our larger chassis Power series amplifiers, along with our latest technology, and put them in a smaller footprint design without sacrificing power or performance.
Thus, our Power small chassis amplifiers were born. These amplifiers are built on our proven Class AD and BR circuit designs allowing the amplifiers to be over 40% smaller while producing more power than the comparable full size Power version. Heat is managed with our 3-stage cooling system using forced induction air flow allowing you to really push these amps without concern of overheating.
MODELS SHOWN | T500X1br, T400X2ad
PRODUCING MORE POWER THAN EVER BEFORE
Building on the legacy that began over 35 years ago, we completely redesigned our Punch series. This was not just a refresh of their look but also the perfect time to add-in the latest innovations in amplifier design. With a sleek new style thanks to our brushed, cast aluminum chassis with stealth top mount controls, these new Punch amplifiers truly grab the attention of anyone who sees them.
But of course, these amps are more than just pretty, they're feature rich and powerful. One such innovation is our CLEAN setup circuit which not only tells you if and when your music is distorting, but simplifies the setup of the amp. This gets you listening to your music that much faster. Power has also been addressed in the new circuit design with all models easily exceeding their rated power which means not only is your music clear, but it can get plenty loud.
BOOSTED RAIL
IDEAL FOR ALL YOUR MOBILE TOYS
Rockford's original small chassis amplifier, the PBR series was developed with a few goals and a select group of customers vehicles in mind. We wanted a small footprint amplifier that produced a lot of power but didn't put a strain on a vehicles electrical system. We had our eyes on the motorcycle and UTV markets knowing that audio solutions for many of these customers were few and what was available wasn't the highest in quality.
We developed the PBR amps to be ultra-efficient by using the vehicle's own electrical system for a power supply and developed our patented "boosted rail" circuit that stores energy and then releases it when the demands of the music require it. This means that when you hit the road or the trails, you can enjoy your music knowing it is powered by an amplifier built to Rockford's high standards.
MODELS SHOWN | P1000X1bd, P400X2, P300X2, P1000X5
11
2015 BUYER'S GUIDE
MODELS SHOWN | PBR500X1br, PBR300X4
MODELS SHOWN | R600X5, R1200-4D, R400-4D
13
2015 BUYER'S GUIDE
THE PERFECT STARTING POINT
Our prime amplifiers are a great first choice to get you going. Whether you're looking to get into your first audio system or just looking for a Rockford quality amplifier that isn't going to break the bank, look no further than the Prime series of amplifiers. Many of the design innovations that we've developed over the years, from how to deal with heat to maximizing the efficiency of the power supply, have made their way into the Prime amps allowing us to create a line that is not only high quality, but also at an affordable cost to you, the customer.
And, like all Rockford amplifiers, we make sure that these not only meet, but exceed their rated power to ensure that you get every watt possible that you've paid your hard earned money for. Incorporating features such as variable crossovers and our famous Punch EQ circuit further completes the package making the Prime amplifiers a perfect choice for your audio system.
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has led us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.
+20
+18
+16
+14
+12
+10
+8
+6
+4
+2
-0
-2 20
50 100 200
BASS
500 1k 2k
Hz
5k 10k 20k TREBLE
PUNCH EQUALIZATION
U.S. Patent (3,883,832)
In the early 70's, Jim Fosgate studied the acoustical properties of automobiles by using a real time analyzer. Jim discovered multiple problems common in all vehicles; a midbass hump, a steep high frequency roll off and reduced bass response. This research lead to adding Punch EQ to Rockford Fosgate amps to help correct the acoustical deficiencies found in the automotive listening environment. The new Punch EQ2 is an on-board equalization circuit that when set to Low-Pass (LP) operation, becomes a variable Bass Boost. When set to High-Pass (HP) operation, it acts as a variable Mid-Bass and Treble Boost. When set to All Pass (AP) operation, both Bass and Treble frequencies are boosted.
Products Featuring: on-board PUNCH EQ
HEATSINK
ALUMINIUM
MOSFET
THERMAL GREASE
CERAMIC
MAXIMUM EFFICIENCY HEAT SINK APPLICATION
MEHSA3 heat management technology takes heat sink efficiency to a new level. The key was to create a dielectric layer between the ceramic topside and the aluminum base that retains all of the electrical isolation and capacitive coupling of the early material increasing its thermal conductivity. The higher power handling results in a 20% reduction in thermal impedance.
Products Featuring: MEHSA
4/2/1
The ability to deliver continuous total RMS rated power to the speaker(s) in any impedance ranging between 4 ohm through 1 ohm.
Products Featuring: 4/2/1
15
2015 BUYER'S GUIDE
YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR AMPLIFIER TECHNOLOGIES.
Output Power
20 40 60 80 100 120 140 160 180 200 220 240
T2500-1bdCP WITH
4000
WITHOUT
3500
3000
2500
2000
Frequency
CONSTANT POWER
U.S. Patent (7,994,857)
Music and speakers have a dynamic relationship. As the frequency of music varies, so does the impedance of the speaker. Rockford Fosgate's Constant Power circuit design actively monitors and increases voltage and current as the speaker's impedance rises with music. Resulting in up to a 25% increase in total amplifier power.
Products Featuring: CONSTANT POWER
THERMAL IMAGE WITHOUT
DYNAMIC THERMAL MANAGEMENT
Our engineers at Rockford Fosgate have developed an award winning cooling design called THERMADL TIMMAG(EDW ynIaTmHic Thermal Management). This patent pending design seamlessly manages the
output and power supply temperatures, while evenly distributing the excess heat across the entire amplifier.
Products Featuring: DTM
THERMAL IMAGE WITHOUT
THERMAL IMAGE WITH
NON MULTIPLYING ADVANCED DECISION
Safe output protection is handled by our proprietary NOMAD circuit. NOMAD is an analog computer designed to calculate the maximum level of safe current allowable for each output device (based on their instantaneous voltage drop). This allows the protection to be much more precise than ever before; offering protection against: · Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
Products Featuring: NOMAD
CEA-2006
Power ratings on Rockford Fosgate amplifiers conform to CEA-2006 industry standards. These guidelines mean your amplifier's output power ratings are REAL POWER numbers, not inflated marketing ratings.
Products Compliant with CEA-2006
C.L.E.A.N.
U.S. Patent (8,712,066 B1)
Time and sophisticated test equipment have been replaced with Rockford's integrated level setting technology called CLEAN (Calibrated Level Eliminates Audible Noise). Using simple LED indicators to identify both signal clipping from the audio source and the output level clipping to the speakers, this precise level set-up eliminates speaker damaging distortion.
Products Featuring: CLEAN
AMPLIFIER PERFORMANCELINEUP
TOPOLOGIESEXPLAINED - Amplifier topology is the arrangement of parts in an amplifier design. These designs are broken out into `classes'. Each class has tradeoffs, making the various classes suited for various applications...like Class D or BD with higher RMS power, but undesirable noise in the higher frequencies making it better suited to power subwoofers.
CLASS BD (Patent - RE40550) The Rockford Fosgate
BD topology is more efficient than typical class AB and has lower distortion than class D designs. Rockford BD amplifiers are 75-80% efficient vs. 20-60% efficient class AB amplifiers. Delivering more power from your amplifier with less drain on your vehicles electrical and charging system.
CLASS AD - The Rockford Fosgate ad topology brings
our high efficiency BD amplifier design to a full range application. Using our Dynamic Frequency Switching to increase the switching frequency during lower output levels for better signal resolution. Coupled with Post Choke Feedback Filtering to compare the input signal to the output signal at the speaker connector removing any unwanted distortion. These technologies eliminate the inherent switching noise associated with typical class D designs.
CLASS D - High efficiency amplifier design that
reduces current consumption from the charging system
CLASS TA - The trans·ana topology operates
the output stage with its full voltage gain, which allows the input stage to operate from a low voltage regulated supply. The signal is then shifted up in level to the high voltage section by the driver stage which forms an active node at ultrasonic frequencies. This results in a very stable, highly linear operation.
CLASS BR (Patent 8,212,620) - To achieve higher
efficiency with lower distortion, Rockford's BR topology combines, Cycle-by-Cycle, an indirectly coupled high/ low voltage rail linear topology with a switched high/low voltage linear rail topology. This combination yields an unsurpassed power density (watts per cubic inch).
CLASS AB - The combination of a class B power
output with the class A low distortion attributes make class AB the most common amplifier topology in the electronics industry.
FULL RANGE CLASS D - High efficiency
amplifier design that reduces current consumption from the charging system
EFFICIENCY RMS CLASS
HEIGHT
1 CHANNEL
500-2500watts
500-1000watts
500-1200watts
85%
85%
90%
THERMAL
MASS
PER
INCH
-
These amplifier cross sections show the amount increased play time and lower device distortion.
of
heatsink
material
(Thermal
Mass).
A
greater
thermal
mass
means
326
GRAMS
WIDTH
299
GRAMS
WIDTH
HEIGHT
137
GRAMS
WIDTH
17
2015 BUYER'S GUIDE
HEIGHT
EFFICIENCY RMS CLASS
EFFICIENCY RMS CLASS
EFFICIENCY RMS CLASS
400-600watts
70%
300-1000watts
70%
150-300watts
68%
400-1000watts
83%
400-600watts
85%
500watts
77%
300-500watts
73%
101
GRAMS
WIDTH
DUAL-FAN COOLED
HEIGHT
101
GRAMS
WIDTH
BOOSTED RAIL
HEIGHT
1CH / 2CH / 4CH
2CH / 4CH
1CH / 2CH / 4CH
MATERIAL HIERARCHY
THE GUTS OF AN AMPLIFIER
Organizing the combination of parts that make up the guts of an amplifier tremendously impacts its performance capabilities. A change in topology type matched with a variation of power supply components deliver a higher power output and enhanced audio quality. Rockford's proprietary amplifier topologies and electrical technologies in our amplifier lineup will drive your system to new heights.
HEAT SINK CIRCUIT BOARD
MOSFETS POWER SUPPLY
TERMINALS
BESt GOOD
Heat Sink - This heavy outer shell protects the parts inside by transferring away the heat made reproducing an audio signal (music). Circuit Board - Sometimes referred to as the PCB, is used to connect thisto-that through tiny lines of copper across multiple layers of pathways. Terminals - These are the connection points for the speakers or subwoofers and the power source(battery) for the amplifier.
19
2015 BUYER'S GUIDE
RCA
MOSFETs - A type of transistor used to amplify audio signal(music). You'll see more of these guys lined up as wattage demands increase. Power Supply - A.K.A the transformer, as the name suggests it takes the incoming voltage and converts it to a useable voltage for speakers. RCA - These are the connection points for the audio signal(music) coming from the audio source (radio). RCA connectors are most commonly used.
8.1"
2.1" 14.9"
· Superior sound quality achieved using audiophile grade components. · Proprietary Dynamic Thermal Management circuit manages heat production
allowing you to play harder longer without overheating. · Select models utilize our Constant Power circuit giving you up to 25% more
power where you want it when you want it.
500WATTS 1000WATTS 1500WATTS 2500WATTS
400WATTS 600WATTS
400WATTS 600WATTS 800WATTS 1000WATTS
Die-Cast Aluminum w/DTMTM
C-Clamp compression
Balanced Differential
TO-247 MOSFETs w/MEHSATM
Ferrite Core Coated/Booted Transformer, with CONSTANT POWERTM
4 layer 3 oz. Copper Circuit Board
*T1500-1bdCP MODEL SHOWN
4.3"
500WATTS
400WATTS
400WATTS
7" 1.6"
· Over 40% smaller than full size Power amps without sacrificing performance. · Maximizes cooling using our forced induction cooling fan system. · Simplified setup using our C.L.E.A.N. circuit technology.
Extruded Aluminum
Molex; Set-Screw or Pigtail
Balanced Differential; High-Level Capable with Auto Turn -On TO-220 MOSFETs w/MEHSATM
Ferrite Core Coated/Booted Transformer, with CONSTANT POWERTM 4 layer 2 oz. Copper Circuit Board
*T400X2ad MODEL SHOWN
300WATTS 400WATTS 500WATTS 1000WATTS
300WATTS 400WATTS 500WATTS 1000WATTS
400WATTS 600WATTS
1000WATTS
7.8"
Die-Cast Aluminum w/ DTMTM
C-Clamp compression
Balanced Differential; High-Level Capable with Auto Turn-On TO-220 MOSFETs w/MEHSATM
Ferrite Core Coated/Booted Transformer 4 layer 2 oz. Copper Circuit Board
*P1000X1bd MODEL SHOWN
2.4"
13.3"
· Built on a legacy over 35 years in the making. · The C.L.E.A.N. setup circuit ensures maximum performance and
undistorted output. · Signal inputs can accept either speaker level or RCA level input signals
without needing a convertor.
6.8"
250WATTS 500WATTS 750WATTS 1200WATTS
150WATTS
250WATTS 300WATTS
600WATTS
Die-Cast Aluminum
Set-Screw
2" 11.2"
Balanced Differential; High-Level Capable TO-220 Bipolar Transistors Ferrite Core Transformer
· Custom engineered high mass heat sink design for maximum heat dissipation. · Top mount controls for ease of installation and setup.
2 layer 2 oz. Copper Circuit Board
*R250X4 MODEL SHOWN
300WATTS 500WATTS
300WATTS
300WATTS
Extruded Aluminum Molex; Set-Screw or Pigtail
Balanced Differential; High-Level Capable with Auto Turn -On TO-220 MOSFETs w/MEHSATM Storage Capacitor 4 layer 2 oz. Copper Circuit Board
*PBR300X1 MODEL SHOWN
4.3"
6.5" 1.5"
· Small chassis, application specific amplifier design accepts speaker level or RCA level input signals.
· Perfect for vehicles with low current capable electrical systems. · Three times the power of similar sized A/B models.
21
2015 BUYER'S GUIDE
6.8"
2" 11.1"
· Ultra-efficient 4-channel amplifier design using the latest full range Class D technology.
· Amplifiers are optimized for 4-channel front/rear systems.
400WATTS 600WATTS
Die-Cast Aluminum Set-Screw Balanced Differential TO-220 MOSFETs Ferrite Core Transformer 2 layer 2 oz. Copper Circuit Board
*R600-4D MODEL SHOWN
Rated Power Frequency Response THD+N @ Rated Power Input Sensitivity S/N Ratio Channel Separation Dimensions Topology Circuit Board Variable Crossover Impedance Stability Protection Heatsink Design RCA Inputs Power Terminals Speaker Terminals Additional Features
[
[ AMPLIFIER SPECIFICATIONS
T400-2
120x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged
T600-2
200x2 @ 4 ohms 300x2 @ 2 ohms 600x1 @ 4 ohms bridged
T400-4
60x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged
T600-4
100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged
T800-4ad
150x4 @ 4 ohms 150x4 @ 2 ohms 200x4 @ 1 ohm 300x2 @ 4 ohms bridged 400x2 @ 2 ohms bridged
T1000-4ad
250x4 @ 4 ohms 250x4 @ 2 ohms 250x4 @ 1 ohm 500x2 @ 4 ohms bridged 500x2 @ 2 ohms bridged
T500-1bdCP
300x1 @ 4 ohms 500x1 @ 2 ohms 500x1 @ 1 ohm
T1000-1bdCP
700x1 @ 4 ohms 1000x1 @ 2 ohms 1000x1 @ 1 ohm
T1500-1bdCP
1000x1 @ 4 ohms 1500x1 @ 2 ohms 1500x1 @ 1 ohm
T2500-1bdCP
1500x1 @ 4 ohms 2500x1 @ 2 ohms 2500x1 @ 1 ohm
T400X2ad
200x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged
T400X4ad
100x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged
T500X1br
175x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm
20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz
<0.05% 150mV - 5V
>105dB
<0.05% 150mV - 5V
>105dB
<0.05% 150mV - 5V
>105dB
<0.05% 150mV - 5V
>105dB
<1.0% 150mV - 5V
>95dB
>50dB H 2.14" x W 8.14" x L11.41" (Small chassis)
TRANS·ana
4 layer 3 oz. copper circuit board
>50dB H 2.14" x W 8.14" x L13.66" (Medium chassis)
>50dB H 2.14" x W 8.14" x L13.66" (Medium chassis)
>50dB H 2.14" x W 8.14" x L14.91" (Large chassis)
>50dB H 2.14" x W 8.14" x L13.66" (Medium chassis)
Class ad w/ Constant Power
20Hz - 20kHz
<1.0% 150mV - 5V
>95dB
>50dB H 2.14" x W 8.14" x L14.91" (Large chassis)
Class ad w/ Constant Power and 4/2/1
20Hz - 250Hz
<0.5% 150mV - 5V
>100dB
N/A
H 2.14" x W 8.14" x L11.41" Class bd w/
(Small chassis)
Constant Power
20Hz - 250Hz
<0.8% 150mV - 5V
>100dB
N/A
H 2.14" x W 8.14" x L13.66"
(Medium chassis)
20Hz - 250Hz
<0.8% 150mV - 5V
>100dB
N/A
H 2.14" x W 8.14" x L14.91"
(Large chassis)
20Hz - 250Hz
<0.8% 150mV - 5V
>100dB
N/A
H 2.14" x W 8.14" x L21.9"
(X-Large chassis)
4 layer 3 oz. copper circuit board
20Hz - 20kHz 20Hz - 20kHz 20Hz - 220Hz
<1.0% 150mV - 12V >110dB <1.0% 150mV - 12V >110dB <1.0% 150mV - 12V >110dB
>60dB H 1.6" x W 4.3" x L7" (Compact chassis)
>60dB H 1.6" x W 4.3" x L8.3" (Compact chassis)
N/A
H 1.6" x W 4.3" x L8.3"
(Compact chassis)
Class ad w/ Constant Power
4 layer 2 oz. copper circuit board
Class br
P300X2
100x2 @ 4 ohms 150x2 @ 2 ohms 300x1 @ 4 ohms bridged
P400X2
125x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged
P500X2
150x2 @ 4 ohms 250x2 @ 2 ohms 500x1 @ 4 ohms bridged
P1000X2
300x2 @ 4 ohms 500x2 @ 2 ohms 1000x1 @ 4 ohms bridged
P400X4
50x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged
P600X4
75x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged
P1000X5
75x4 + 200x1 @ 4 ohms 125x4 + 400x1 @ 2 ohms N/A + 500x1 @ 1 ohm
20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz
20Hz - 20kHz
<1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB
<1.0% 150mV - 12V >105dB
>50dB H 2.4" x W 7.8" x L 9.9" (Mini chassis)
>50dB H 2.4" x W 7.8" x L 11.0" (Small chassis)
>50dB H 2.4" x W 7.8" x L 13.3" (Medium chassis)
>50dB H 2.4" x W 7.8" x L 15.0" (Large chassis)
>50dB H 2.4" x W 7.8" x L 11.0" (Small chassis)
>50dB H 2.4" x W 7.8" x L 13.3" (Medium chassis)
>50dB H 2.4" x W 7.8" x L 15.0" (Large chassis)
TRANS·ana
TRANS·ana & Class bd
4 layer 2 oz. copper circuit board
4 layer 2 oz. copper circuit board
P300X1
200x1 @ 4 ohms 300x1 @ 2 ohms
P400X1
200x1 @ 4 ohms 400x1 @ 2 ohms
P500X1bd
150x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm
P1000X1bd
300 @ 4 ohms 600x1 @ 2 ohms 1000x1 @ 1 ohm
20Hz - 20kHz
<1.0% 150mV - 12V >105dB
N/A
H 2.4" x W 7.8" x L 9.9"
(Mini chassis)
20Hz - 20kHz
<1.0% 150mV - 12V >105dB
N/A
H 2.4" x W 7.8" x L 9.9"
(Mini chassis)
20Hz - 250Hz
<1.0% 150mV - 12V >100dB
N/A
H 2.4" x W 7.8" x L 11.0"
(Small chassis)
20Hz - 250Hz
<1.0% 150mV - 12V >100dB
N/A
H 2.4" x W 7.8" x L 13.3"
(Medium chassis)
TRANS·ana Class bd
4 layer 2 oz. copper circuit board
23
2015 BUYER'S GUIDE
24 dB/oct - variable High or Low 1 ohm stereo / 2 ohm mono
Pass and All Pass
stable
NOMAD circuit · Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
Focused mass die-cast heatsink / DTMTM- Dynamic Thermal Management / MEHSATM- Maximum Efficiency HeatSink Application
Balanced differential RCA inputs and RCA pass thru
4 Ga. c-clamp compression connector
8 Ga. c-clamp compression connector
Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz with optional PEQ
Differential RCA inputs
Differential RCA inputs and RCA pass thru
Focused mass die-cast heatsink / 4-Point Thermal Monitoring / MEHSATM- Maximum Efficiency HeatSink Application
Differential RCA inputs
Differential RCA inputs and RCA pass thru
24 dB/oct - variable Low Pass
1 ohm mono rated
NOMAD circuit · Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
Focused mass die-cast heatsink / DTMTM- Dynamic Thermal Management / MEHSATM- Maximum Efficiency HeatSink Application
Balanced differential RCA inputs and RCA pass thru
4 Ga. c-clamp compression connector
8 Ga. c-clamp compression connector
Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization
12 dB/oct - variable High or Low 2 ohm stereo / 4 ohm mono
Pass and All Pass
rated
12 dB/oct - variable Low Pass
1 ohm mono rated
NOMAD circuit · Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
12 dB/oct - variable High or Low 2 ohm stereo / 4 ohm mono
Pass and All Pass
rated
NOMAD circuit · Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
Dual fan forced induction cooling
Balanced differential panel mount RCA and RCA pass thru
High level capable with auto turn-on balanced differential RCA inputs
stealth proprietary 1/0 Ga. 4mm allen head set-screw cast zinc connector
stealth proprietary 8 Ga. 4mm allen head set-screw cast zinc connector
Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Equalization and BDSync or Master/ Slave
8 Ga. Quick Connect terminal
16 Ga. 4-pin Molex connector
Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)
10 Ga. nickel plated Quick Connect
Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Level Control(PLC2)
Focused mass die-cast heatsink / DTMTM- Dynamic Thermal Management / MEHSATM- Maximum Efficiency HeatSink Application
High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru
4 Ga. c-clamp compression connector
8 Ga. c-clamp compression connector
Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)
12 dB/oct - variable High or Low Pass and All Pass 12 dB/oct - fixed infrasonic
2 ohm stereo / 1 ohm mono rated
12 dB/oct - variable High or Low 2 ohm mono rated Pass and All Pass
12 dB/oct - variable Low Pass
1 ohm mono rated
NOMAD circuit · Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
NOMAD circuit · Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
Focused mass die-cast heatsink / DTMTM- Dynamic Thermal Management / MEHSATM- Maximum Efficiency HeatSink Application
High level capable with auto turn-on balanced differential RCA inputs
High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru
High level capable with auto turn-on balanced differential RCA inputs
4 Ga. c-clamp compression connector
8 Ga. c-clamp compression connector
Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)
Focused mass die-cast heatsink / DTMTM- Dynamic Thermal Management / MEHSATM- Maximum Efficiency HeatSink Application
High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru
4 Ga. c-clamp compression connector
8 Ga. c-clamp compression connector
Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)
Rated Power Frequency Response THD+N @ Rated Power Input Sensitivity S/N Ratio Channel Separation Dimensions Topology Circuit Board Variable Crossover Impedance Stability Protection Heatsink Design RCA Inputs Power Terminals Speaker Terminals Additional Features
[
[ AMPLIFIER SPECIFICATIONS
PBR300X2
100x2 @ 4 ohms 150x2 @ 2 ohms 300x1 @ 4 ohms bridged
20Hz - 20kHz
<0.5% 150mV - 11V >100dB
>50dB H 1.5" x W 4.25" x L 6.75" Class br
6 layer 2 oz. copper circuit board
PBR300X4 75x4 @ 4 ohms
PBR300X1
75x1 @ 4 ohms 150x1 @ 2 ohms 300x1 @ 1 ohm
PBR500X1
175x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm
20Hz - 20kHz <0.5% 150mV - 11V >100dB >50dB H 1.5" x W 4.25" x L 6.75"
20Hz - 250Hz <0.2% 150mV - 11V >105dB N/A
H 1.5" x W 4.25" x L 6.75"
20Hz - 20kHz <0.1% 150mV - 11V >105dB N/A
H 1.5" x W 4.25" x L 8.25"
4 layer 2 oz. copper circuit board
R150X2
50x2 @ 4 ohms 75x2 @ 2 ohms 150x1 @ 4 ohms bridged
R250X4
40x4 @ 4 ohms 60x4 @ 2 ohms 125x2 @ 4 ohms bridged
R300X4
50x4 @ 4 ohms 75x4 @ 2 ohms 150x2 @ 4 ohms bridged
R400-4D
75x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged
R600-4D
100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged
R600X5
50x4 + 200x1 @ 4 ohms 75x4 + 300x1 @ 2 ohms 150x2 + N/A @ 4 ohms bridged
R250X1
150x1 @ 4 ohms 250x1 @ 2 ohms
R500X1D
300x1 @ 4 ohms 500x1 @ 2 ohms
R750-1D
250x1 @ 4 ohms 500x1 @ 2 ohms 750x1 @ 1 ohm
R1200-1D
400x1 @ 4 ohms 800x1 @ 2 ohms 1200x1 @ 1 ohm
20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz
20Hz - 250Hz 20Hz - 250Hz 20Hz - 250Hz 20Hz - 250Hz
<1.0% 150mV - 12V >100dB <1.0% 150mV - 12V >100dB <1.0% 150mV - 12V >100dB <1.0% 150mV - 5V >90dB <1.0% 150mV - 5V >90dB <1.0% 150mV - 12V >100dB
<1.0% 150mV - 12V >100dB <1.0% 150mV - 12V >100dB <1.0% 150mV - 4V >100dB <1.0% 150mV - 4V >100dB
>50dB H 2.0" x W 6.8" x L 11.2" Class ab
Single layer 2 oz. copper circuit board
>50dB H 2.0" x W 6.8" x L 11.2"
>50dB H 2.0" x W 6.8" x L 13.2"
>50dB H 2.0" x W 6.8" x L 9.1"
Full Range 4 layer 2 oz. copper
Class d
circuit board
>50dB H 2.0" x W 6.8" x L 11.1"
>50dB
H 2.0" x W 6.8" x L 13.2"
Class ab & Single layer 2 oz. copper
Class d
circuit board
N/A
H 2.0" x W 6.8" x L 11.2" Class ab Single layer 2 oz. copper
circuit board
N/A
H 2.0" x W 6.8" x L 8.5"
Class d
N/A
H 2.0" x W 6.8" x L 9.1"
4 layer 2 oz. copper circuit board
N/A
H 2.0" x W 6.8" x L 11.1"
12 dB/oct - 80Hz fixed High or Low Pass and All Pass
2 ohm stereo / 4 ohm mono rated
4 ohm stereo ONLY
· Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
12 dB/oct - variable Low Pass 1 ohm mono rated
Inter-locking extruded aluminum heatsinks w/ pierced metal recessed badge
RCA/Speaker level pigtailed Molex connector with auto turn-on
10 Ga. Molex connector
8 Ga. Molex connector
16 Ga. pigtailed Molex connector
Optional PEQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +12dB @ 12KHz, variable high-level adjust and 6V DC offset w/ remote out
12 Ga. pigtailed Molex connector
Variable high-level adjust and 6V DC offset w/ remote out
Optional PEQ Variable from 0dB to +18dB @ 45Hz, variable highlevel adjust and 6V DC offset w/ remote out
12 dB/oct - variable High or Low Pass and All Pass
2 ohm stereo / 4 ohm mono · Short Circuit
rated
· Thermal
Focused mass die-cast heatsink
RCA or speaker level pigtailed Molex connector input and RCA pass thru
RCA input or speaker level pigtailed Molex connector input
4 Ga. set-screw 10 Ga. set-screw Punch EQ variable from 0dB to
connector
connector
+12dB @ 45Hz
Punch EQ selectable from 0dB/+6dB/+12dB @ 45Hz
RCA input and RCA pass thru
Punch EQ variable from 0dB to +18dB @ 45Hz
12 dB/oct - variable High or Low Pass and All Pass
2 ohm stereo / 4 ohm mono rated(Front/Rear) and 2 ohm mono rated(Sub)
· Short Circuit · Thermal
12 dB/oct - variable Low Pass 2 ohm mono rated
· Short Circuit · Thermal
12 dB/oct - variable Low Pass 12 dB/oct - variable infrasonic
1 ohm mono rated
Focused mass die-cast heatsink Focused mass die-cast heatsink
RCA input or speaker level pigtailed Molex connector input
RCA or speaker level pigtailed Molex connector input and RCA pass thru
4 Ga. set-screw connector
10 Ga. set-screw connector
Punch EQ selectable from 0dB/+6dB/+12dB @ 45Hz(Front/ Rear) and Variable from 0dB to +12dB @ 45Hz(Sub)
4 Ga. set-screw connector
10 Ga. set-screw connector
Punch EQ variable from 0dB to +12dB @ 45Hz and included Punch Level Control(PLC)
RCA input and RCA pass thru
Punch EQ variable from 0dB to +18dB @ 45Hz and included Punch Level Control(PLC)
25
2015 BUYER'S GUIDE
ROCKFORDFOSGATE.COM
Don't forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Amp Wire Calculator to optimize output with properly sized wire.
SSUUBBWWOOOFEORFSERS
UNPRECEDENTED POWER AND CONTROL
YEAR
WATTS
3000 UPTO RMS POWER HANDLING
1 LIMITED WARRANTY
5" VOICE COIL
68 XMAX PEAK TO PEAK M M
HISTORY OF PERFORMANCE
YEAR
WATTS
600 UPTO RMS POWER HANDLING
1 2.5" LIMITED WARRANTY
VOICE COIL
32 XMAX M PEAK TO PEAK M
THE PERFECT FIRST STEP
YEAR
WATTS
250 UPTO RMS POWER HANDLING
1 LIMITED WARRANTY
2" VOICE COIL
20 XMAX PEAK TO PEAK M M
29
2015 BUYER'S GUIDE
DESIGNED WITH THE LATEST WOOFER TECHNOLOGY
The power series truly surpasses the competition as your premier woofer choice. Power series subwoofers have always been known for class leading performance, power handling and output capabilities. This year our speaker engineers went back to the drawing board trying to not only improve on the current design but create something entirely new. They far surpassed expectations by not only recreating the T2 series of woofer from the ground up, but also introducing our newest additions to the family; the T3 19" and T1 Slim series of woofers. Whether you loved the old T2 and want to finally step-up to the next level or you feel like you're grown-up enough to handle our new T3 super woofer monstrosity, we now offer woofers to make the competition and your friends cringe in fear. If you're tight on space and don't want to be left out, our new T1 Slim woofer has all the performance and output of our full size T1 with an astounding 3 inch mounting depth. If you're someone who needs to be the loudest and baddest on the block, then you need the Power series woofers in your ride.
MODELS SHOWN | T3S2-19, T2S1-16, T1D212, T0D212, T1S2-12
A PERFECT BALANCE BETWEEN "QUALITY" & "QUANTITY" BASS
Punch series woofers are ideal for the customer looking for the best of both worlds. While built on a long standing history of performance, the punch series woofers can deliver not only output to satisfy you when you want it loud but maintain a level of sound quality for when you really want to "listen" to your music. With three series within the family, covering both standard and shallow depth models alike, we have woofers to suit just about anyone's taste in bass.
Taking many design cues from the Power family of products, our speaker engineers continue to improve the series year after year making the Punch family one of the most sought after woofer lines for music and bass enthusiasts alike. With features like our Kevlar reinforced cone assemblies for high strength and anodized aluminum voice coil formers to handle heat buildup in the motor structure under full power situations, these woofers are designed to perform.
OPTIONAL
ENCLOaSndUR/ oEr GRILLE
Optional integrated grille available for ALL PUNCH subwoofers. Loaded enclosures available for all 10" or 12" PUNCH subwoofers and 8", 10" or 12" PUNCH SHALLOW subwoofers.
MODELS SHOWN | P3D2-12, P2D2-12, P1S2-12, P3SD2-12
31
2015 BUYER'S GUIDE
OPTIONAL ENCLOSURE
Loaded enclosures available for all 10" or 12" PRIME R1 and R2 Shallow subwoofers. Optional integrated grille available for R1 subwoofers.
MODELS SHOWN | R2D2-12, R2SD2-12, R1S4-12
33
2015 BUYER'S GUIDE
THE PERFECT FIRST STEP INTO PERFORMANCE AUDIO
Are you looking to simply add some bass to your existing audio system? Or better yet, are you wanting to design your first full audio system from the ground up? Are you looking for a woofer that is built with quality and performance in mind and has been designed by the industry's leading car audio manufacturer? Then our Prime series of woofers are exactly what you are looking for.
Offering both standard depth and shallow mount models, we've created a family of woofers that deserves to carry the name Rockford Fosgate. These woofers, like their Punch brethren, are built using many of the same speaker technologies that Rockford has been famous for over 30 years for and you won't break the bank buying one. Simply put, our Prime series of woofers are held to the same standards of quality and performance as any other Rockford woofer but delivered at an affordable price.
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.
35
2015 BUYER'S GUIDE
VERTICAL ATTACH SURROUND TECHNIQUE
Rockford's proprietary surround technique, VAST, provides up to a 25% increase in the speaker's effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved.
Products Featuring: VAST
SLIM
SHALLOW
SHALLOW
EVCC Our Patent Pending EVCC (Encapsulated Voice Coil Coupling) technology connects to the woofers voice coil from both the top and bottom and provides a more secure mounting platform for both the dual spiders and cone assembly.
Products Featuring: EVCC
SLIM
SHALLOW
SHALLOW
SYMS The Patent Pending unique motor structure design allows full excursion capabilities of the woofers voice coil while allowing an overall reduction in woofer mounting depth.
Products Featuring: SYMS
SLIM
SHALLOW
SHALLOW
CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling that over time can damage voice coils.
Products Compliant with CEA-2031
SLIM
SHALLOW
SHALLOW
YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR SUBWOOFER TECHNOLOGIES.
FLEX FIT 2 AND CAR MOUNTING SPEAKER LOCATION
FLEX FIT The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of single screw sized holes. This allows for a slight adjustment of the speaker when mounted.
Products Featuring: FLEX FIT
SLIM
SHALLOW
SHALLOW
FELX FIT 2 The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit installations.
Products Featuring: FLEX FIT 2
SLIM
SHALLOW
SHALLOW
INDUCTIVE DAMPING HEAT SINK Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to reduce voice coil temperature.
Products Featuring: IDHS
SLIM
SHALLOW
SHALLOW
SELECTABLE WOOFER IMPEDANCE FUSED TERMINATION Removing and inverting the center plug allows nominal impedance of voice coils to quickly be configured in a Series or Parallel wiring configuration. This removable impedance selection jumper also provides fused protection in severe overload conditions.
Products Featuring: SWIFT
SLIM
SHALLOW
SHALLOW
VERIFIED WITH KLIPPEL To adorn the `Verified with Klippel' mark, the qualifying company's loudspeaker engineering personnel must be trained and certified by Klippel prior to using the three separate Klippel systems to design, develop and test.
· Klippel DA-2 (Designed) · Klippel PM-8 (Developed) · Klippel QC (Tested)
Products Verified with KLIPPEL
SLIM
SHALLOW
SHALLOW
SUBWOOFER PERFORMANCE LINEUP
SPL
SPL - Sound Pressure Level numbers reflect an in-car response utilizing dual subwoofers in a typical sedan size cabin at peak power.
XMAX - The measured excursion of the subwoofer in one
XMAX OUTWARD EXCURSION
REST
INWARD EXCURSION
direction, with Peak-to-Peak covering its entire travel. The more air a woofer moves, the higher the SPL.
PEAK POWER
=
PEAK POWER - The maximum amount of amplifier power that can be applied to a subwoofer.
37
2015 BUYER'S GUIDE
anatomy OF A SUBWOOFER
Variations in the anatomy of a subwoofer dramatically changes its performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combining quality materials with Rockford's proprietary acoustic technologies, our subwoofer lineup is sure to meet your system's demands.
BASKET SPIDER
VOICE COIL
SURROUND CONE
MAGNET
MATERIAL HIErARCHY
Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in its place. Spider - Second part of the speakers suspension, connects the cone and voice coil to the basket and controls the travel of the cone assembly. Voice Coil - The brains of the operation, directing the force from the magnet to push or pull based on the applied electrical signal.
Surround - First part in the speakers suspension, attached to the cone to maintain the centering of the voice coil in the magnetic gap.
BESt
Cone - A.K.A the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality.
Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.
GOOD
3000 SINGLE 1
SINGLE 2
RMS POWER RANGE
Injection Molded Foam Surround with VASTTM
Specially designed to maximize control and overcome common problems stamp-formed foam surrounds encounter.
WATTS
WATTS
2000-2500 SINGLE 1
SINGLE 2
RMS POWER RANGE
Injection Molded Foam Surround with VASTTM
Specially designed to maximize control and overcome common problems stamp-formed foam surrounds encounter.
Dual Nomex Progressive Spiders with Integrated Lead Wires True NomexTM spiders maximize excursion capabilities while maintaining full linear cone control.
Stacked Single Layer Edge Wound Aluminum 5" Voice Coil Single layer edge wound design allows for maximum heat dissipation versus multilayer single voice coils.
Injection Molded Foam w/ VASTTM
3 Layer Glass Fiber/ Aramid/ Glass Fiber w/ Aluminum Dust Cap
Dual NomexTM Progressive w/ Integrated Leadwires
*T3S1-19 MODEL SHOWN
41
2015 BUYER'S GUIDE
Three-Layer Glass Fiber/ Aramid Honeycomb/ Glass Fiber Cone
Extremely rigid yet lightweight cone design eliminates flex under high power applications.
Dual Nomex Progressive Spiders with Integrated Lead Wires
True NomexTM spiders maximize excursion capabilities while maintaining full linear cone control.
Dual Gap Multi-Pole Neodymium Push/Pull Motor Structure Innovative dual-gap design drives the voice coil in a custom push/pull configuration for maximum power handling. Massive Neodymium slug provides necessary magnetic force to move the voice coil/ cone assembly to full excursion.
5" Single Layer Edge Wound Aluminum Die-Cast Aluminum w/ Integrated Trim Ring Dual Gap Multi-Pole Neodymium Push/ Pull
Injection Molded Foam w/ VASTTM
3 Layer Glass Fiber/ Aramid/ Glass Fiber w/ Aluminum Dust Cap
Dual NomexTM Progressive w/ Integrated Leadwires
*T2S1-16 MODEL SHOWN
Three-Layer Glass Fiber/ Aramid Honeycomb/ Glass Fiber Cone Extremely rigid yet lightweight cone design eliminates flex under high power applications.
Triple Stack Segmented Ferrite Motor Structure Massive motor structure provides necessary magnetic force to maximize output at power handling capabilities.
4" Single Layer Edge Wound Aluminum Die-Cast Aluminum w/ FlexFit2TM Triple Stack Ferrite Magnet w/ IDHSTM
500-600 SINGLE 1
SINGLE 2
RMS POWER RANGE
SLIM
Injection Molded Foam Surround with VASTTM
Specially designed to maximize control and overcome common problems stamp-formed foam surrounds encounter.
Three-Layer Carbon Fiber/ Rohacell/ Glass Fiber Cone
Extremely rigid yet lightweight cone design eliminates flex under high power applications.
Dual NomexTM Progressive Spiders with Integrated Lead Wires True NomexTM spiders maximize excursion capabilities while maintaining full linear cone control.
Innovative suspension design eliminates any mechanical bottoming of the voice coil assembly.
Injection Molded Foam w/ VASTTM
3 Layer Carbon Fiber/ Rohacell/ Glass Fiber w/ Aluminum Dust Cap
Dual NomexTM Progressive w/ Integrated Leadwires
*T1S1-12 MODEL SHOWN
43
2015 BUYER'S GUIDE
High Temp High Energy Neodymium Motor Structure High quality, high energy neodymium magnet structure provides motor force equivalent to a full size T1 woofer.
3" Dual Wound W/ Interior & Exterior Windings Die-Cast Aluminum w/ FlexFit2TM High Energy Neodymium
WATTS
Kevlar fiber cone / Hard Anodized Aluminum Dust Cap Reduces piston flex. Eliminates cone distortion.
Double Stacked Magnet with IDHSTM IDHSTM increases thermal capacity and heat dissipation. This increases power handling and performance.
DUAL 2 DUAL 4
600-1000 RMS POWER RANGE
Tall Profile, SantopreneTM w/ VASTTM Kevlar Fiber Paper/ Hard Anodized Aluminum
Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents
3" 4-Layer High Temp.Aluminum w/ NomexTM collar Die-Cast Aluminum w/ FlexFitTM
Double Stack Ferrite Magnet w/ IDHSTM
*T1D412 MODEL SHOWN
WATTS
Tall profile SantopreneTM w/ VASTTM surround Allows for linear travel.
High excursion.
Die-cast aluminum frame with FlexFitTM For reduced voice coil former temperature and increase power handling.
FlexFit for better mounting.
DUAL 2 DUAL 4
550-800 RMS POWER RANGE
Tall Profile, SantopreneTM w/ VASTTM Kevlar Fiber Paper/ Hard Anodized Aluminum Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 3" 4-Layer High Temp.Aluminum w/ NomexTM collar Die-Cast Aluminum w/ FlexFitTM Double Stack Ferrite Magnet
*T0D412 MODEL SHOWN
WATTS
DUAL 2 DUAL 4
500-600 RMS POWER RANGE
Tall Profile, SantopreneTM w/ VASTTM Hard Anodized Aluminum
Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 2.50" 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM
Double Stack Ferrite Magnet
*P3D4-12 MODEL SHOWN
WATTS
Hard Anodized Aluminum Cone & Dust Cap Premium sound quality. Reduces piston flex. Eliminates cone distortion.
Spider Cooling Vents Proprietary vents work in conjunction with the vented pole piece and vented back plate for maximum cooling & increased power handling.
DUAL 2 DUAL 4
250-400 RMS POWER RANGE
Tall Profile, SantopreneTM w/ VASTTM Kevlar Fiber Paper
Dual Mirror Imaged w/ Stitched Lead Wire and Cooling Vents 2.25" 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM
Double Stack Ferrite Magnet
*P2D4-12 MODEL SHOWN
WATTS
Tall profile SantopreneTM w/ VASTTM surround Increased cone area. Allows for linear travel. High excursion.
45
2015 BUYER'S GUIDE
Kevlar Reinforced semipressed Paper Cone Lightweight for efficiency.
Very rigid to eliminate cone distortion.
Half Roll, Nitrile Butadiene surround Allows for linear travel.
StampCastTM frame with Flex FitTM Rigid basket. Flex Fit for better mounting.
SINGLE 2 SINGLE 4
200-250 RMS POWER RANGE
Half-Roll, Nitrile Butadiene Rubber Kevlar Fiber Paper
Single w/ Stitched Lead Wire and Cooling Vents 2" 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM
Single Stack Ferrite Magnet
*P1S4-12 MODEL SHOWN
WATTS
M-Roll SantopreneTM surround w/ VASTTM Increased cone area.
Lower profile.
Hard Anodized Aluminum Cone & Dust Cap Premium sound quality. Reduces piston flex. Eliminates cone distortion.
SHALLOW
DUAL 2 DUAL 4
WATTS
150-400 RMS POWER RANGE
M-Roll, SantopreneTM w/ VASTTM Hard Anodized Aluminum
Dual Laminated w/ Embedded Lead Wire and Cooling Vents 2.50" 4-Layer High Temp. Aluminum w/ NomexTM collar StampCastTM w/ FlexFitTM
Single Ferrite Magnet
*P3SD4-12 MODEL SHOWN
WATTS
DUAL 2 DUAL 4
250 RMS POWER RANGE Half-Roll, Sealed Polyether-ester Foam Polypropylene
Single w/ Stitched Lead Wire and Cooling Vents 2" 4-Layer High Temp. Aluminum w/ NomexTM collar Stamped Steel
Single Ferrite Magnet
*R2D4-12 MODEL SHOWN
Half-Roll, Sealed Polyether Ester Foam Surround Assists in linear cone travel.
Improved excursion capabilities.
Polypropylene Cone Rigid cone reduces piston flex.
Reduces cone distortion.
WAT TS
SINGLE 4
200 RMS POWER RANGE Half-Roll, Sealed Polyether-ester Foam Polypropylene
Single w/ Stitched Lead Wire and Cooling Vents 2" 4-Layer High Temp. Aluminum w/ NomexTM collar Stamped Steel
Single Ferrite Magnet
*R1S4-12 MODEL SHOWN
High durability compressed foam surround Tear & fatigue resistant.
Designed for long life use.
47
2015 BUYER'S GUIDE
Fiber Reinforced Painted Paper-Pulp Cone w/ Aluminum Dustcap Rigid & lightweight.
Improves thermal performance for higher power handling.
Monolithic Injection Molded Polypropylene Cone Rigid cone design. Reduces cone distortion.
Stamped Steel Frame Design reduces frame flex. Improves performance.
DUAL 2 DUAL 4
SHALLOW
200-250 RMS POWER RANGE
Half-Roll, Sealed Polyether-ester Foam Injection Molded Polypropylene
Single w/ Stitched Lead Wire and Cooling Vents 2" 4-Layer High Temp. Aluminum w/ NomexTM collar Stamped Steel
Single Ferrite Magnet
*R2SD4-12 MODEL SHOWN
WATTS
Speaker Size Nominal Impedance Xmax (mm) Sensitivity RMS Power Handling (watts) Peak Power Handling (watts) Mounting Diameter Mounting Depth Speaker Displacement (cu. ft.) Sealed Enclosure (cu. ft.) Ported Enclosure Surround Material Dustcap Material Cone Material Voice Coil Spider Frame Structure Motor Structure Terminal Connectors Trim Ring
[ [
[ SUBWOOFER SPECIFICATIONS
T3S1-19/ T3S2-19 19"
Single 1 or 2
34
90 dB
3000
T2S1-13/ T2S2-13 13"
Single 1 or 2
34
87 dB
2000
T2S1-16/ T2S2-16 16"
Single 1 or 2
34
90 dB
2500
T1D210/T1D410 10"
Dual 2 or 4
16.4
83 dB
600
T1D212/T1D412 12"
Dual 2 or 4
16.4
86 dB
800
T1D215/T1D415 15"
Dual 2 or 4
16.4
88 dB
1000
T1S1-10T1S2-10 SLIM
10"
Single 1 or 2
15
85 dB
600
T1S1-12/T1S2-12 SLIM
12"
Single 1 or 2
15
83 dB
500
T0D210/T0D410 10"
Dual 2 or 4
14.8
81 dB
550
T0D212/T0D412 12"
Dual 2 or 4
14.8
84 dB
700
T0D215/T0D415 15"
Dual 2 or 4
14.8
87 dB
800
6000
4000 5000 1200 1600 2000 1200
1000 1100 1400 1600
17.54"
15.62
0.34
N/A
12.28" 9.7"
0.34
1.85
15.04" 10.47" 0.49
2.4
9.13"
6.5"
0.203
0.75
11.25" 6.9"
0.308
1.25
13.94" 8.4"
0.547
2.25
11.22" 3.0"
0.05
0.8
9.13"
3.0"
0.03
1.5
9.13"
6.5"
0.203
0.75
11.25" 6.9"
0.308
1.25
13.94" 8.4"
0.547
2.25
8 cu. ft. Port: (1) 23"h x 3"w x 30"d
4.0 cu. ft. Port: (1) 14"h x 3"w x 20.5"d 5.5 cu. ft. Port: (1) 18"h x 3"w x 23"d 1.50 cu ft. Port: (1) 4"x11" 1.75 cu ft. Port: (1) 4"x9" 2.66 cu ft. Port: (1) 4"x10" 1.5 cu. ft. Port: (1) 4"x13
2 cu. ft. Port: (1) 4"x14.25" 1.50 cu ft. Port: (1) 4"x11" 1.75 cu ft. Port: (1) 4"x9" 2.66 cu ft. Port: (1) 4"x10"
P3D2-10/P3D4-10 10"
Dual 2 or 4
13.9
P3D2-12/P3D4-12 12"
Dual 2 or 4
13.9
P3D2-15/P3D4-15 15"
Dual 2 or 4
13.9
P3SD2-8/P3SD4-8 SHALLOW
8"
Dual 2 or 4
8.4
P3SD2-10/P3SD4-10 SHALLOW
10"
Dual 2 or 4
8.4
P3SD2-12/P3SD4-12 SHALLOW
12"
Dual 2 or 4
8.4
P2D2-8/P2D4-8 8"
Dual 2 or 4
7.8
P2D2-10/P2D4-10 10"
Dual 2 or 4
11
P2D2-12/P2D4-12 12"
Dual 2 or 4
13.3
P2D2-15/P2D4-15 15"
Dual 2 or 4
13.3
P1S2-8/P1S4-8 8"
Single 2 or 4
7.6
P1S2-10/P1S4-10 10"
Single 2 or 4
9.4
P1S2-12/P1S4-12 12"
Single 2 or 4
9.4
P1S2-15/P1S4-15 15"
Single 2 or 4
9.4
82 dB
500
85 dB
600
86 dB
600
82 dB
150
83 dB
300
85 dB
400
83 dB
250
84 dB
300
86 dB
400
86 dB
400
83.5 dB
200
85 dB
250
86 dB
250
87.5 dB
250
1000 1200 1200
300
600
800 500 600 800 800 400 500 500 500
9.13"
6.2"
0.127
0.59
11.25" 6.7"
0.194
1.02
13.94" 7.6"
0.247
1.58
7.13"
2.7"
0.040
0.25
9.13"
3.5"
0.074
0.50
11.25" 3.7"
0.086
1.00
7.13"
4.8"
0.071
0.23
9.13"
5.9"
0.088
0.59
11.25" 6.4"
0.170
1.02
13.94" 7.3"
0.219
1.58
7.13"
4.4"
0.053
0.23
9.13"
5.3"
0.085
0.59
11.25" 6.0"
0.113
1.02
13.94" 7.0"
0.191
1.58
1.40 cu ft. Port: (1) 4"x14" 1.79 cu ft. Port: (1) 4"x10" 2.66 cu ft. Port: (1) 4"x10"
0.75 cu ft. Port: (1) 3"x9"
1.00 cu ft. Port: (1) 4"x12"
1.25 cu ft. Port: (1) 4"x12" 0.65 cu ft. Port: (1) 2"x8" 1.40 cu ft. Port: (1) 4"x14" 1.79 cu ft. Port: (1) 4"x10" 2.66 cu ft. Port: (1) 4"x10" 0.65 cu ft. Port: (1) 2"x6" 1.40 cu ft. Port: (1) 3"x8" 1.79 cu ft. Port: (1) 3"x6" 2.66 cu ft. Port: (1) 4"x8"
R2D2-10/R2D4-10 10"
Dual 2 or 4
6.5
89 dB
250
500
9.13"
4.3"
0.101
0.59
1.40 cu ft. Port: (1) 4"x13"
R2D2-12/R2D4-12 12"
Dual 2 or 4
6.5
87 dB
250
500
11.25" 5.1"
0.150
1.02
1.79 cu ft. Port: (1) 4"x9.3"
R2SD2-10/R2SD4-10 SHALLOW
10"
Dual 2 or 4
8
83 dB
200
400
9.13"
3.4"
0.037
0.70
1.40 cu ft. Port: (1) 4"x13.7"
R2SD2-12/R2SD4-12 SHALLOW
12"
Dual 2 or 4
10
85 dB
250
500
11.25" 3.6"
0.039
0.90
1.79 cu ft. Port: (1) 4"x11.8"
R1S4-10 10"
Single 4
7.0
87 dB
200
400
9.13"
4.4"
0.06
0.75
1.4 cu ft. Port: (1) 3"x8"
R1S4-12 12"
Single 4
7.0
90 dB
200
400
11.25" 4.94"
0.10
1.02
1.79 cu ft. Port: (1) 3"x6"
[ SUBWOOFER ENCLOSURE SPECIFICATIONS
Speaker Model P3-2X10 (2) P3D4-10 P3-1X10 (1) P3D2-10 P3-2X12 (2) P3D4-12 P3-1X12 (1) P3D2-12 P2-2X10 (2) P2D4-10 P2-1X10 (1) P2D2-10 P2-2X12 (2) P2D4-12 P2-1X12 (1) P2D2-12
Nominal Impedance 1 1 1 1 1
RMS Power Peak Power Handling Handling Dimensions (HxWxD)
1000 Watts
2000 Watts
13.125" x 31.125" x 15.125"
500 Watts
1000 Watts
13.125" x 17.0" x 15.125"
1200 Watts
2400 Watts
15.125" x 33.875" x 15.75"
600 Watts
1200 Watts
15.125" x 19.125" x 15.75"
600 Watts
1200 Watts
13.125" x 31.125" x 15.125"
1
300 Watts
600 Watts
13.125" x 17.0" x 15.125"
1
800 Watts
1600 Watts
15.125" x 33.875" x 15.75"
1
400 Watts
800 Watts
15.125" x 19.125" x 15.75"
49
2015 BUYER'S GUIDE
Speaker Model P1-2X10 (2) P1S4-10 P1-1X10 (1) P1S4-10 P1-2X12 (2) P1S4-12 P1-1X12 (1) P1S4-12 R1-1X10 (1) R1S4-10 R1-2X10 (2) R1S4-10 R1-1X12 (1) R1S4-12 R1-2X12 (2) R1S4-12
Nominal Impedance 2 4 2 4 4 2 4 2
RMS Power Peak Power Handling Handling Dimensions (HxWxD)
500 Watts
1000 Watts
13.125" x 31.125" x 15.125"
250 Watts
500 Watts
13.125" x 17.0" x 15.125"
500 Watts
1000 Watts
15.125" x 33.875" x 15.75"
250 Watts
500 Watts
15.125" x 19.125" x 15.75"
200 Watts
400 Watts
12.0" x 15.825" x 12.25"
400 Watts
800 Watts
12.0" x 30.0" x 12.25"
200 Watts
400 Watts
14.0" x 17.5" x 12.25"
400 Watts
800 Watts
14.0" x 33.75" x 12.25"
Injection Molded Foam Surround with VASTTM
Aluminum Dustcap
Tall profile, SantopreneTM with VASTTM
Injection Molded Foam Surround with VASTTM
Aluminum Dustcap
Three Layer Glass Fiber/ Aramid Honeycomb/ Glass Fiber
Dual Separated Single Layer Edge Wound Aluminum 5" Voice Coils
Single Layer Edge Wound Aluminum 4" Voice Coil
Dual Nomex Progressive Spiders
Aluminum Dia Cast Frame with Integrated Heat Sink Fins and Venting
Dual Gap Multi-Pole Neodymium Push/Pull Motor Structure
Triple Stack Segmented Ferrite Motor Structure
Custom Push Spring Insulated 4 AWG Terminals
Integrated Die Cast Aluminum Trim Ring
Custom Push Spring Insulated 8 AWG Terminals
Detachable Die Cast Aluminum Trim Ring
Kevlar® fiber reinforced semi-pressed paper
3" 4-layer ultra-high temp. aluminum voice coil with spun-laced NomexTM insulating reinforcement collar
Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents
Die-cast aluminum with FlexFitTM
Double stack ferrite magnet with extended vented pole and bumped vented backplate with IDHSTM
Dual 10 Ga. proprietary SWIFTTM terminal
Reversible die-cast aluminum w/ Soft Touch paint and integrated/ removable grille
Three Layer Carbon Fiber/Rohacell/ Glass Fiber
Dual Wound Single 3" Voice Coil with Interior and Exterior Windings
Dual Nomex Progressive Spiders
Aluminum Dia Cast Frame with Integrated Heat Sink Fins
High Temp High Energy Neodymium Motor Structure
Custom Push Spring Insulated 10 AWG Terminals
Detachable Die Cast Aluminum Trim Ring
Tall profile, SantopreneTM with VASTTM
Hard anodized aluminium
Kevlar® fiber reinforced semi-pressed paper
3" 4-layer ultra-high temp. aluminum voice coil with spun-laced NomexTM insulating reinforcement collar
Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents
Die-cast aluminum with FlexFitTM
Double stack ferrite magnet with extended vented pole and bumped vented backplate with IDHSTM
Dual 10 Ga. proprietary SWIFTTM terminal
Reversible die-cast aluminum w/ Soft Touch paint and integrated/ removable grille
Tall profile, SantopreneTM with VASTTM
Hard anodized aluminum
Hard anodized aluminum
M-roll, SantopreneTM with VASTTM
Hard anodized aluminum
Hard anodized aluminum
2.5" 4-layer ultra-high temp. aluminum voice coil with spun-laced NomexTM insulating reinforcement collar
Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents
StampCastTM with FlexFitTM
2.5" 4-layer ultra-high temp. aluminum voice coil with spun-laced NomexTM insulating reinforcement collar
Dual laminated, progressive roll tear & fatigue resistant poly-cotton spiders with embedded lead wire technique and proprietary spider cooling vents
StampCastTM with FlexFitTM
Double stack ferrite magnet with extended vented pole and bumped vented backplate
8 Ga. custom insulated/isolated compression style
Reversible die-cast aluminum w/ Soft Touch paint and optional integrated grille
Ferrite magnet structure with extended vented pole and bumped vented backplate
8 Ga. custom insulated/isolated compression style
Reversible die-cast aluminum w/ Soft Touch paint and optional grille
Tall profile, SantopreneTM with VASTTM
Kevlar fiber reinforced semi-pressed paper
Kevlar® fiber reinforced semi-pressed paper
2.25" 4-layer high temp. aluminum voice coil with spun-laced NomexTM insulating reinforcement collar
Dual mirror imaged, progressive roll tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents
StampCastTM with FlexFitTM
Double stack ferrite magnet structure with extended vented pole and bumped backplate
8 Ga. custom insulated/isolated compression style
Reversible die-cast aluminum w/ Soft Touch paint and optional integrated grille
Half-roll, high density
Kevlar fiber reinforced
Nitrile Butadiene Rubber semi-pressed paper
Kevlar® fiber reinforced semi-pressed paper
2" 4-layer high temp. aluminum voice coil with spun-laced NomexTM insulating reinforcement collar
Tear & fatigue resistant polycotton spider with multipoint stitched lead wire technique and proprietary spider cooling vents
StampCastTM with FlexFitTM
Ferrite magnet structure with extended vented pole and bumped backplate
8 Ga. custom insulated/isolated compression style
Reversible Acrylonitrile Butadiene Styrene with optional integrated grille
Half-roll, Sealed Polyether-ester foam
Polypropylene
Injection molded Polypropylene
Polypropylene
Injection molded Polypropylene
2" 4-layer high temp. aluminum voice coil with spun-laced NomexTM insulating reinforcement collar
Tear & fatigue resistant polycotton spider with multipoint stitched lead wire technique and spider cooling vents
Stamped steel
Ferrite magnet structure with extended vented pole and bumped backplate
Standard 10 Ga.
Integrated Polyvinyl Chloride trim ring
Laser-etched aluminum
Fiber re-inforced paper pulp
2" 4-layer high temp. copper voice coil with aluminum former
Integrated ABS
Speaker Model
P3S-1X10 (1) P3SD2-10
P3S-1X12 (1) P3SD2-12
Nominal Impedance
1
1
RMS Power Peak Power Handling Handling Dimensions (HxWxD)
300 Watts
600 Watts
13.5" x 19.0" x 5.3"/3.3"
400 Watts
800 Watts
13.5" x 27.4" x 5.3"/3.3"
Speaker Model
R2S-1X10 (1) R2SD4-10
R2S-1X12 (1) R2SD4-12
Nominal Impedance
2
2
RMS Power Peak Power Handling Handling Dimensions (HxWxD)
200 Watts
400 Watts
13.5" x 19.0" x 5.3"/3.3"
250 Watts
500 Watts
13.5" x 27.4" x 5.3"/3.3"
ROCKFORDFOSGATE.COM
Don't forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.
SSPPEEAKAEKRSERS
UNPRECEDENTED POWER AND CONTROL
YEAR
WATTS
150
UP TO RMS POWER HANDLING
1 LIMITED WARRANTY
40 - 30 FREQUENCY
RESPONSE
Hz
kHz
HISTORY OF PERFORMANCE
75
WATTS
UP TO RMS POWER HANDLING
YEAR
1 LIMITED WARRANTY
43 - 22 FREQUENCY
RESPONSE
Hz
kHz
THE PERFECT FIRST STEP
YEAR
WATTS
65
UP TO RMS POWER HANDLING
1 LIMITED WARRANTY
47 - 20 FREQUENCY
RESPONSE
Hz
kHz
53
2015 BUYER'S GUIDE
MODELS SHOWN | T5652-S
OUTPUT YOU EXPECT, SOUND QUALITY YOU NEVER IMAGINED
If you're truly serious about high quality sound, our Power family of speakers are what you need. Built on years of knowledge in acoustic engineering, Rockford Fosgate delivers a family of speakers that is industry leading. From our class leading T5 series of audiophile components down to our T1 coaxial speakers, the Power family focuses on providing you the best musical experience you've ever had.
Plus, by incorporating design features such as VAST technology for up to a 25% increase in cone area, which means not only more output for you but a better overall frequency response to our Flex Fit baskets for improved mounting fitment and shorter installation times. The Power family of speakers takes top honors among even the most discerning music aficionados.
MODELS SHOWN | T4652-S
MODELS SHOWN | T3652-S
MODELS SHOWN | T2652-S
MODELS SHOWN | T1693, T1650-S, T1650, T142
WHEN LOUD JUST ISN'T LOUD ENOUGH
If you're someone that really wants to pump up the level of your music to the extreme, then the Punch Pro series of speakers are for you. Rockford Engineers have found that there is a growing community of people who design their audio systems not so much towards sound quality, but more towards sound "QUANTITY". It's with this group in mind that led to the development of the Punch Pro speaker family. Designed with high efficiency and high power handling, these speakers are meant to take the power and play loud.
Available in a variety of tweeter and midrange sizes along with passive crossovers to compliment, Rockford has created a family of products that truly put the phrase "If it's too loud, then you're too old" to the test. So, if you want your audio system to not just be at the party, but "BE" the party, then you need to check them out.
FOR THOSE WHO LIKE IT RAW AND LOUD
Are you someone who really likes to "feel" your music? If so then check out the Punch family of speakers. When you're ready to upgrade and you really want something that can deliver crisp, clear vocals and have the low end response to back them up, then you've found them. Using the same VAST technology found on our Power line of speakers, the Punch line is able to produce deeper bass and more volume output than the competition.
With a variety of coaxial and component model speakers ranging in size from 3.5 inches to 6x9 inches, the Punch series is ideal for the customer wanting to roll the windows down, crank the music up and cruise the streets with their buddies.
MODELS SHOWN | P1694, P1650, P165-SE, P142
55
2015 BUYER'S GUIDE
MODELS SHOWN | PPS4-10, PPS4-6, PP4-NT, PP4-T
HIGH OUTPUT
EXTREME LEVELS OF MID TO HIGH RANGE WILL BE EXPERIENCED
SCENARIOS TO CONSIDER WHEN USING THIS PRODUCT:
A superior sensitivity yields low power (Watts) requirements.
Their unique structure gives opportunity to an equally unique fitment.
It is HIGHLY encouraged to incorporate a generous quantity of this product in one application for a preferred outcome.
To all the Rockford Fosgate Fanatics we would like to introduce the speakers to accompany your two strapped T2500-1bdCP pushing (2) T2 16's... the PUNCH PRO speakers are guaranteed to provide HIGH OUTPUT full range for extreme SQL (Sound Quantity Level) systems.
AUTHENTIC SOUND AT A PRIME PRICE POINT
Are you tired of listening to your factory speakers rattling away inside your doors? Do you want to turn up your factory radio and just get "more" out of it than you have now? Then you need to check out the Prime family of speakers. Our Prime full range loudspeakers and components are a no-compromise design for that drop-in fit for your factory speaker location.
Designed with an ultra-lightweight poly cone and dome tweeter, our Prime drivers are efficient enough to hook up directly to your factory head-unit for instant improvement. If you really want to improve the sound, connect them to an amplifier to increase the speaker's output and overall performance.
MODELS SHOWN | R`169X3, R165X3, R14X2, R165-S
57
2015 BUYER'S GUIDE
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering, and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has led us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.
VERTICAL ATTACH SURROUND TECHNIQUE Rockford's proprietary surround technique, VAST, provides up to a 25% increase in the speakers effective radiating cone area without complicated installation issues. This design alters the typical design and manufacturing technique by eliminating the large flat glue surface area (the landing) which allows the surround to be shifted for increased cone area. In turn, both nominal efficiency and maximum output capabilities are dramatically improved. Products Featuring: VAST
FLEX FIT The slot mounted frame pattern of the Flex Fit basket utilizes slots (where feasible) instead of single screw sized holes. This allows for a slight adjustment of the speaker when mounted. Products Featuring: FLEX FIT
FLEX FIT 2 AND CAR MOUNTING SPEAKER LOCATION
59
2015 BUYER'S GUIDE
FELX FIT 2 The slot mounted frame pattern allows for variable adjustments to the mounting position, especially for Euro-Fit installations. Products Featuring: FLEX FIT 2
YOUTUBE.COM/ROCKFORDFOSGATE WATCH DETAILED VIDEOS ON OUR SPEAKER TECHNOLOGIES.
DISCREET DUAL CLAMP Rockford's proprietary tweeter mounting design provides concentric clamping pressure around the perimeter of the mounting hole, utilizing a single center screw. This applies balanced pressure to both faces of the mounting surface. From there, the tweeter simply snaps into place and is finished with a snap on trim ring. Products Featuring: DDC
INDUCTIVE DAMPING HEAT SINK Secures directly to the top of magnet structure to improve system efficiency by reducing both distortion and back EMF (Electo-magnetic force). Also radiates heat to reduce voice coil temperature. Products Featuring: IDHS
RF LINK Rockford's proprietary RF Link is a bus-power component connection system enabling integration and control of all RF Link equipped products. The use of this systems allows for the expansion of auxiliary controls and managed system turn on. Products Featuring: RFLINK
INTEGRATED CONCEALED CROSSOVER The Integrated Concealed Crossover hides the crossover inside the basket, creating a cleaner look and easier installation. Products Featuring: ICC
CEA-2031 Power handling on Rockford Fosgate speakers conform to CEA-2031 industry standards. This means your speaker has the capacity to handle power under continuous demand, not instantaneous power handling that over time can damage voice coils. Products Compliant with CEA-2031
VERIFIED WITH KLIPPEL To adorn the `Verified with Klippel' mark, the qualifying company's loudspeaker engineering personnel must be trained and certified by Klippel prior to using the three separate Klippel systems to design, develop and test. · Klippel DA-2 (Designed) · Klippel PM-8 (Developed) · Klippel QC (Tested) Products Verified with KLIPPEL
SPEAKER PERFORMANCE LINEUP
ACCURACY SCORE
FREQ.
RESPONSE
RANGE
BASS MID HIGH
PEAK POWER
=
Accuracy Score - Is derived from calculating the magnitude deviations from the speaker's frequency response against a reference flat magnitude response.
Frequency Response Range - The frequency response range or width tells you how high or low the speaker plays.
Peak Power - The maximum amount of amplifier power that can be applied to a speaker prior to entering into an unsafe operating scenario.
62
MATERIAL HIErARCHY
framework OF A SPEAKER Modifications to the framework of a speaker significantly impact its sonic signature. Combining various materials will strengthen, add volume and resonate the music to a desired sound. By intertwining superior speaker designs with Rockford's proprietary acoustic technologies in our speaker lineup, we are sure to bring your music to life.
SURROUND TWEETER CROSSOVEr
CONE
BASKET MAGNET
BESt GOOD
Tweeter - Composed of the same parts as an speaker, surround, cone, voice coil, basket and magnet. Just on a smaller scale. Crossover - Works like a switch board, directing the audio signal through caps, filters and switches to the appropriate speaker. Surround - Works in harmony with the spider, attached to the cone to maintain the centering of the voice coil in the magnetic gap.
63
2015 BUYER'S GUIDE
Cone - A.K.A the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality. Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in their place. Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.
COMPONENTS
2WAY 6.5"
· Designed and engineered to produce the highest level of sound quality for the most discerning audiophile.
· Our custom passive/ active crossover allows you to fine tune the system to suit your taste using the integrated remote control.
· The solid copper heat sink and phase plug draw heat away from the voice coil improving sound quality and increasing power handling.
1"(25mm) Liquid Crystal Polymer Fiber Ring Radiator Dome, Dual Neodymium Magnets w/ IDHSTM, Low Resonant Chamber and DDCTM
RFLinkTM Equipped External Component Crossover w/ 1% Mil-Spec Parts and I elligent Protection w/ Integrated/Remote Tuning Module
Butyl Rubber w/ VASTTM
Tri-laminate Liquid Crystal Polymer Fiber w/ Machined Copper Phase Plug
Die-Cast Aluminum w/ FlexFitTM
Multi-PoleTM Dual Neodymium Magnet w/ IDHSTM
*T5652-S MODEL SHOWN
COMPONENTS
2WAY 6.5"
· The T4 components are highly accurate in their frequency reproduction by utilizing the same tweeter, basket and motor structure from the T5. components combined with the cone and crossover from the T3 components.
· The multi-pole Neodymium motor structure maximizes excursion capability and control under extreme output conditions.
· The Liquid Crystal polymer Fiber cone is lightweight and rigid which improves sound quality and output without distorting cone flex.
1"(25mm) Liquid Crystal Polymer Fiber Ring Radiator Dome, Dual Neodymium Magnets w/ IDHSTM, Low Resonant Chamber and DDCTM External Audiophile Grade ComponentCrossover w/ 5% (Tol) Parts
Butyl Rubber w/ VASTTM
Tri-laminate Liquid Crystal Polymer Fiber
Die-Cast Aluminum w/ FlexFitTM
Multi-PoleTM Dual Neodymium Magnet w/ IDHSTM
*T4652-S MODEL SHOWN
COMPONENTS
2WAY 6.5"
1"(25mm) Liquid Crystal Polymer Fiber Dome w/ Neodymium Magnet and DDCTM External Audiophile Grade Component Crossover w/ 5% (Tol) Parts
Butyl Rubber w/ VASTTM
Woven Liquid Crystal Polymer Fiber
Die-Cast Aluminum w/ FlexFitTM
Neodymium Magnet w/ IDHSTM
*T3652-S MODEL SHOWN
· Our LCP tweeter with silk surround provides clean, crisp high frequency reproduction without worrying about distortion at higher volumes.
· Our components feature our discrete Dual Clamping system for the tweeters which provides for a more secure installation than other clamping designs.
· The crossover network features bi-amp capabilities if your system calls for amplifying the tweeter separate from the midrange speaker.
COMPONENTS
2WAY 6.5" 5.25" Tweeter Kit
1"(25mm) Aluminum Dome w/ Neodymium Motor and DDCTM
External Audiophile Grade Component Crossover w/ 5% (Tol) Parts
Butyl Rubber w/ VASTTM
Injection Molded Polypropylene-Carbon Fiber Blend w/ Machined Aluminum Phase Plug StampCastTM w/ FlexFitTM
Neodymium Magnet w/ IDHSTM
*T2652-S MODEL SHOWN
65
2015 BUYER'S GUIDE
· Our injection molded, carbon fiber reinforced cone assembly reduces cone flex while maintaining sound quality.
· Our midrange speakers utilize our VASTTM technology, which can provide for up to 25% more cone area meaning better frequency response and increased output.
· Our StampCastTM aluminum basket design provides a rigid framework and eliminates frame flex under high power applications.
2WAY 6.75" 6.5" COMPONENTS 6.0" 5.25" Tweeter Kit
· Our FlexFitTM and FlexFit 2TM mounting hole patterns improve the fitment of our speakers as well as expand the number of vehicles the speakers will fit in. (Also found on T1650 Coax).
· The 1" fabric dome tweeter provides natural sounding high frequencies while the midrange delivers the lows with precision.
1"(25mm) Treated Fabric Dome w/ Neodymium Motor and DDCTM External Audiophile Grade Component Crossover w/ 5% (Tol) Parts Butyl Rubber w/ VASTTM
Injection Molded Polypropylene-Carbon Fiber Blend StampCastTM w/ FlexFitTM and FlexFit2TM
Single Ferrite Magnet
*T1675-S MODEL SHOWN
· Our offset cantilever mounted tweeter (select models) eliminates damaging acoustic reflections between the midrange and the rear of the tweeter.
· A perfect choice to replace your factory speaker and attain high quality sound output without needing extensive modification to the vehicle.
COAXIALS
2WAY 6.75" 6.5" 6.0" 5.25" 4.0"
2WAY 6x9" 6x8" 5x7" 4x6"
3WAY 6x9"
1"(25mm) Aluminum Dome w/ Neodymium Motor
ICCTM Component Crossover w/ 5% (Tol) Parts Blutyle Rubber w/ VASTTM
Injection Molded Mineral Filled Polypropylene w/ Carbon Fiber Blend StampCastTM w/ FlexFitTM and FlexFit2TM Single Ferrite Magnet
*T1650 MODEL SHOWN
COMPONENTS
2WAY 6.75" 6.5" 6.0" 5.25" Tweeter Kit
1"(25mm) Plated Polyether Imide (PEI) Dome w/ Neodymium Motor and DDCTM ICCTM Component Crossover w/ 10% (Tol) Parts
Nitrile Butadiene Rubber w/ VASTTM
Injection Molded Mineral Filled Polypropylene
StampCastTM w/ FlexFitTM and FlexFit2TM Single Ferrite Magnet
*P1675-S MODEL SHOWN
· Punch components feature both FlexFitTM and FlexFit 2TM basket designs for improved factory mounting compatibility (Also found on P1650 Coax).
· Most models feature an integrated concealed crossover system so there is no additional crossover box to install.
COAXIALS
2WAY 6.5" 6x9" 6.0" 5x7" 5.25" 4x6" 4.0" 3.5"
3WAY 6.75" 6x9" 6x8"
4WAY 6x9"
1"(25mm) Plated Polyether Imide (PEI) Dome w/ Neodymium Motor and DDCTM
ICCTM w/ 10% (Tol) Parts
Nitrile Butadiene Rubber w/ VASTTM
Injection Molded Mineral Filled Polyprpylene
StampCastTM w/ FlexFitTM and FlexFit2TM
Single Ferrite Magnet
*P1650 MODEL SHOWN
67
2015 BUYER'S GUIDE
· Punch coax speakers are ideal for the customer who likes to really "feel" their music.
· A perfect "step-up'' choice when looking to design an amplified speaker system to replace your worn out factory speakers.
TWEETER
1.0" 4 8
· Our 1 inch horn loaded tweeter is designed for high SPL applications. · The Neodymium motor structure and cast aluminum housing allows for a
compact design for tight spaces.
1"(25mm) Horn Design w/ Machined Aluminum Phase Plug Integrated High-Pass Crossover
N/A
N/A
Die-Cast Aluminum
Neodymium Magnet w/ IDHSTM
*PP4-NT MODEL SHOWN
TWEETER
1.5" 4 8
· With its oversized motor structure and high temperature voice coil our 1.5 inch Pro tweeter is designed for high SPL systems.
1.5"(38mm) Horn Design w/ Machined Aluminum Phase Plug Integrated High-Pass Crossover N/A N/A Die-Cast Aluminum w/ FlexFitTM
Single Ferrite Magnet
*PP4-T MODEL SHOWN
MIDRANGE
6.0" 4
8.0" 10.0"
8
N/A N/A W-Style, Treated Cloth Fiber Reinforced Paper w/ Machined Aluminum Phase Plug StampCastTM w/ FlexFitTM
Single Ferrite Magnet
*PPS4-6 MODEL SHOWN
· High efficiency driver designed for extreme output capabilities. · The fiber reinforced cone with machined aluminum phase plug creates a
highly sensitive speaker that can handle plenty of power.
CROSSOVER
4 8
N/A External Audiophile Grade Component Crossover w/ 5% (Tol) Parts N/A N/A N/A
N/A
*PP4-X MODEL SHOWN
69
2015 BUYER'S GUIDE
· Punch Pro crossover is designed to work with our Pro tweeters and midrange speakers.
· Available in a 4 or 8 ohm model. · Allows connection of multiple midrange speakers to a single crossover.
· A dedicated 2-way component system utilizing a Mica injected polypropylene cone for extended frequency response and accommodates direct OEM installation.
· The Mylar balanced dome tweeter recreates crystal clear highs and comes with an in-line crossover for simplified installation.
COMPONENTS
2WAY 6.75" 6.5" 6.0" 5.25" Tweeter Kit
1"(25mm) Mylar Balanced Dome Integrated High-Pass Crossover
SPE Foam
Vacuum Formed Polypropylene
Stamped Steel Single Ferrite Magnet
*R165-S MODEL SHOWN
· The basket design allows for that perfect factory replacement fit. · Their high efficiency design works great with radio or amplifier power.
COAXIALS
2WAY 6.75" 5.25" 4.0" 6x9" 6x8"
3WAY 6.5" 6x9"
1/2"(13mm) Embedded Phase Coherent Mylar Balanced Dome Integrated High-Pass Crossover
Nitrile Butadiene Rubber
Vacuum Formed Polypropylene
Stamped Steel Single Ferrite Magnet
*R1675X2 MODEL SHOWN
Speaker Size Tweeter Size RMS Power Handling (watts) Peak Power Handling (watts) Frequency Response Sensitivity (1W/1M) Sensitivity (2.83V/1M) Mounting Depth Surround Material Cone Material Spider Frame Structure Motor Structure Tweeter Crossover Terminal Connectors Accessories
[
[ SPEAKER SPECIFICATIONS
T5652-S 6.5" 1"
150 watts 300 watts 45Hz-40kHz
88.5dB 91.5dB 2.48"
Butyl rubber with VASTTM
T4652-S 6.5" 1"
150 watts 300 watts 40Hz-30kHz
89dB
92dB
2.79"
T3652-S 6.5" 1"
125 watts 250 watts 48Hz-24kHz
87dB
90dB
2.48"
T252-S 5.25" 1" T2652-S 6.5" 1"
75 watts 150 watts 65Hz-22kHz 100 watts 200 watts 50Hz-22kHz
87dB 88dB
90dB 91dB
1.97" 2.48"
T2T-S N/A
1"
100 watts 200 watts 3kHz-22kHz
90dB
93dB
*0.91"
T152-S 5.25" 1"
T16-S 6.0" 1"
T1650-S 6.5"
1"
T1675-S 6.75" 1"
75 watts 150 watts 65Hz-22kHz 80 watts 160 watts 60Hz-22kHz 80 watts 160 watts 47Hz - 20kHz 100 watts 200 watts 55Hz-22kHz
87dB 86dB 88 dB 89dB
90dB 89dB 91 dB 92dB
1.99" 1.93" 2.52" 2.51"
T1T-S N/A
1"
100 watts 200 watts 3kHz-22kHz
90dB
93dB
*0.91"
T142 4" T152 5.25" T16 6.0" T1650 6.5" T1675 6.75" T1462 4"x6" T1572 5"x7" T1682 6"x8" T1692 6"x9" T1693 6"x9"
0.75" 40 watts
1"
60 watts
1"
70 watts
1"
75 watts
1"
75 watts
0.75" 45 watts
1"
70 watts
1"
80 watts
1"
100 watts
1"
100 watts
80 watts 85Hz-22kHz 120 watts 65Hz-22kHz 140 watts 65Hz-22kHz 150 watts 44Hz - 20kHz 150 watts 50Hz-22kHz 90 watts 75Hz-22kHz 140 watts 60Hz-22kHz 160 watts 55Hz-22kHz 200 watts 50Hz-22kHz 200 watts 50Hz-22kHz
86dB 86.5dB 88dB 88 dB 89dB 85.5dB 87dB 88dB 90dB 91dB
89dB
1.79"
89.5dB 1.99"
91dB
1.93"
91 dB 2.52"
92dB
2.51"
88.5dB 2.00"
90dB
2.35"
91dB
2.60"
93dB
3.39"
94dB
3.39"
Butyl rubber with VASTTM
Tri-laminate Liquid Crystal Polymer Fiber w/ machined copper phase plug
Tri-laminate Liquid Crystal Polymer FiberTM
Woven Liquid Crystal Polymer FiberTM
Injection molded Polypropylene-carbon fiber blend w/ machined aluminum phase plug
Aluminum dome w/ integral suspension & tuned chamber
Injection molded Polypropylene-carbon fiber blend
NomexTM w/ balanced stitched woven embedded fiber/flat lead wires
NomexTM w/ balanced stitched woven embedded fiber/flat lead wires
NomexTM w/ balanced stitched woven embedded fiber/flat lead wires
Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire
Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire
Treated fabric dome w/ integral suspension & tuned chamber
Injection molded Polypropylene-carbon fiber blend
Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire
P152-S 5.25" 1"
P16-S 6.0" 1"
P165-SE 6.5"
1"
P165-SI 6.5"
1"
P1675-S 6.75" 1"
50 watts 60 watts 60 watts 60 watts 60 watts
P1T-S N/A
1"
60 watts
P132 3.5"
0.5" 20 watts
P142 4"
0.75" 30 watts
P152 5.25" 0.75" 40 watts
P16 6.0"
0.75" 55 watts
P1650 6.5"
0.75" 55 watts
P1675 6.75" 0.75" 60 watts
P1462 4"x6" 0.75" 35 watts
P1572 5"x7" 0.75" 60 watts
P1683 6"x8" 0.75" 65 watts
P1692 6"x9" 0.75" 75 watts
100 watts 70Hz-22kHz 120 watts 60Hz-22kHz 120 watts 43Hz - 20kHz 120 watts 44Hz - 20kHz 120 watts 55Hz-22kHz
87dB 87.2dB 88 dB 88 dB 89dB
90dB
1.91"
90.2dB 1.93"
91 dB 2.24"
91 dB 2.24"
92dB
2.24"
120 watts 3.5kHz-22kHz 90dB
93dB
*0.91"
40 watts 120Hz-22kHz 60 watts 100Hz-22kHz 80 watts 70Hz-22kHz 110 watts 65Hz-22kHz 110 watts 45Hz - 20kHz 120 watts 60Hz-24kHz 70 watts 90Hz-22kHz 120 watts 75Hz-22kHz 130 watts 65Hz-24kHz 150 watts 60Hz-22kHz
85dB 86.5dB 87dB 88dB 88 dB 89dB 87.5dB 89dB 90dB 91dB
88dB
1.46"
89.5dB 1.75"
90dB
1.91"
91dB
1.93"
91 dB 2.24"
92dB
2.24"
90.5dB 1.89"
92dB
2.30"
93dB
2.32"
94dB
3.07"
Nitrile Butadiene Rubber with VASTTM
Injection molded mineral filled Polypropylene
Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire
Plated Polyether Imide (PEI) dome
Nitrile Butadiene Rubber with VASTTM
Injection molded mineral filled Polypropylene
Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire
71
2015 BUYER'S GUIDE
Die-cast aluminum with FlexFitTM
Die-cast aluminum with FlexFitTM
Die-cast aluminum with FlexFitTM
Multi-poleTM dual neodymium magnet w/ IDHSTM
1"(25mm) Liquid Crystal Polymer Fiber ring radiator dome, dual neodymium magnets w/ IDHSTM, low resonant chamber and DDCTM
Single chassis stereo w/ audiophile 1% mil-spec components and dual micro-controller for intelligent protection w/ integrated/remote tuning module and RFLinkTM equipped
Multi-poleTM dual neodymium magnet w/ IDHSTM
1"(25mm) Liquid Crystal Polymer Fiber ring radiator dome, dual neodymium magnets w/ IDHSTM, low resonant chamber and DDCTM
External audiophile grade component crossover w/ 5% (Tol) parts
Neodymium magnet w/ IDHSTM
1"(25mm) Liquid Crystal Polymer FiberTM dome w/ neodymium magnet and DDCTM
External audiophile grade component crossover w/ 5% (Tol) parts
3-way connection terminal 3-way connection terminal 3-way connection terminal
Cat 5 remote extension cable, grilles and mounting hardware
Grilles and mounting hardware
Grilles and mounting hardware
StampCastTM with Flex-fitTM Ferrite magnet structure
1"(25mm) aluminum dome w/ neodymium External audiophile grade component crossover w/ 5%
motor and DDCTM
(Tol) parts
Unified tab
Multi-OEMTM adaptor plates, grilles and mounting hardware
Neodymium
StampCastTM with Flex-fitTM Ferrite magnet structure
1"(25mm) treated fabric dome w/ neodymium motor and DDCTM
18 Ga. Pigtail
External audiophile grade component crossover w/ 5% (Tol) parts
Unified tab
Flush w/ DDCTM, surface and angle mounting hardware
Multi-OEMTM adaptor plates, grilles and mounting hardware
Neodymium StampCastTM with Flex-fitTM Ferrite magnet structure
External audiophile grade component crossover w/ 5% (Tol) parts
1"(25mm) aluminum dome w/ neodymium ICCTM component crossover with 5% (Tol) parts motor and DDCTM
18 Ga. Pigtail Unified tab
Flush w/ DDCTM, surface and angle mounting hardware
Multi-OEMTM adaptor plates, grilles and mounting hardware
StampCastTM with Flex-fitTM Ferrite magnet structure
1"(25mm) plated Polyether Imide (PEI) dome w/ neodymium motor and DDCTM
ICCTM component crossover with 10% (Tol) parts
Unified tab
Multi-OEMTM adaptor plates, grilles and mounting hardware
Neodymium StampCastTM with Flex-fitTM Ferrite magnet structure
3/4"(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium motor
External component crossover w/ 10% (Tol) parts ICCTM with 10% (Tol) parts
18 Ga. Pigtail Unified tab
Flush w/ DDCTM, surface and angle mounting hardware
Multi-OEMTM adaptor plates, grilles and mounting hardware
Speaker Size Tweeter Size RMS Power Handling (watts) Peak Power Handling (watts) Frequency Response Sensitivity (1W/1M) Sensitivity (2.83V/1M) Mounting Depth Surround Material Cone Material Spider Frame Structure Motor Structure Tweeter Crossover Terminal Connectors Accessories
[
[ SPEAKER SPECIFICATIONS
P1694 6"x9" 0.75" 75 watts
150 watts 60Hz-24kHz
PPS4-6 6.5"
N/A 100 watts 200 watts 85Hz-5kHz
PPS8-6 6.5"
N/A 100 watts 200 watts 87Hz-5kHz
PPS4-8 8.0"
N/A 125 watts 250 watts 80Hz-5kHz
PPS8-8 8.0"
N/A 125 watts 250 watts 82Hz-5kHz
PPS4-10 10.0" N/A 350 watts 700watts 40Hz-3kHz
PPS8-10 10.0" N/A 350 watts 700watts 40Hz-3kHz
PP4-NT N/A
1"
50 watts
100 watts 4kHz 20kHz
PP8-NT N/A
1"
50 watts
100 watts 4kHz 20kHz
PP4-T N/A
1.5" 50 watts
100 watts 3kHz-20kHz
PP8-T N/A
1.5" 50 watts
100 watts 3kHz-20kHz
91dB
94dB 3.07"
92.5dB 91.5dB 94.5dB 93dB 95dB 95dB 107 dB 107 dB 103dB 103dB
95.5dB 2.24" 94.5dB 2.24" 97.5dB 2.91" 96dB 2.91" 98dB 4.17" 98dB 4.17" 110 dB 2.57" 110 dB 2.57" 106dB 2.59" 106dB 2.59"
Nitrile Butadiene Rubber with VASTTM
Injection molded mineral filled Polypropylene
W-Style, Treated Cloth
Fiber reinforced paper w/ machined aluminum phase plug
Fatigue resistant polycotton linear spider w/ woven fiber reinforced lead wire
Fatigue resistant polycotton linear spider w/ woven lead wire
N/A
N/A
N/A
R152-S 5.25" 1" R16-S 6.0" 1" R165-S 6.5" 1" R1675-S 6.75" 1"
40 watts 40 watts 40 watts 40 watts
R1T-S N/A
1"
40 watts
R14X2 4"
0.5" 30 watts
R1525X2 5.25" 0.5" 40 watts
R165X3 6.5"
0.5" 45 watts
R1675X2 6.75" 0.5" 45 watts
R168X2 6"x8" 0.5" 55 watts
R169X2 6"x9" 0.5" 65 watts
R169X3 6"x9" 0.5" 65 watts
80 watts 80 watts 80 watts 80 watts
58Hz-20kHz 60Hz-20kHz 60Hz-20kHz 55Hz-20kHz
85dB 89dB 89dB 89dB
88dB 92dB 92dB 92dB
1.91" 1.97" 1.97" 2.00"
80 watts 2.5kHz-22kHz 72.5dB 75.5dB *0.76"
60 watts 100Hz-20kHz 80 watts 62Hz-20kHz 90 watts 52Hz-20kHz 90 watts 52Hz-20kHz 110 watts 51Hz-20kHz 130 watts 48Hz-20kHz
85dB 88dB 91dB 91dB 87dB 90dB
88dB 91dB 94dB 94dB 91dB 93dB
1.72" 1.93" 2.15" 2.19" 2.54" 2.85"
130 watts 47Hz-20kHz
90dB
93dB 2.85"
SPE Foam
Vacuum formed PP
Mylar balanced dome
Nitrile Butadi- Vacuum formed Poly-
ene Rubber
propylene
Fatigue resistant spider Fatigue resistant spider
StampCastTM with Flex-fitTM Ferrite magnet structure StampCastTM with Flex-fitTM Ferrite magnet structure
3/4"(20mm) pole mounted plated Polyether Imide (PEI) dome w/ neodymium motor
N/A
ICCTM with 10% (Tol) parts ICCTM with 10% (Tol) parts
Unified tab
Multi-OEMTM adaptor plates, grilles and mounting hardware
12 Ga. compression style
Grilles and mounting hardware
Die-cast aluminum with FlexFitTM
Neodymium magnet structure
Ferrite magnet structure
1.0" (25mm) horn design 1.5"(38mm) horn design
ICCTM with 10% (Tol) parts
Stamped steel
Ferrite magnet structure
1"(25mm) mylar balanced dome
Integrated high-pass crossover
Stamped steel
Ferrite magnet structure
1/2"(13mm) Embedded Phase Coherent mylar balanced dome
Integrated high-pass crossover
12 Ga. compression style
Mounting hardware
Standard spade connector
Grilles and mounting hardware
18 Ga. Pigtail Standard spade connector
Flush, surface and angle mounting hardware
Grilles and mounting hardware
1/2"(13mm) pole mounted mylar balanced dome
73
2015 BUYER'S GUIDE
ROCKFORDFOSGATE.COM
Don't forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.
VEHICLE INTEGRATION
DIGITAL PROCESSORS SIGNAL CONVERTERS POWERED LOADED DIRECT FIT SPEAKERS ACCESSORIES
DIGITAL PROCESSORS / LINE DRIVER
PROPRIETARY 3SIXTY TECHNOLOGY
When you make a product purchase that bears the Rockford Fosgate name, you are receiving the technology, engineering and innovation that has taken over three decades to hone. Our constant desire to push the performance envelope has lead us to develop proprietary amplifier topologies and acoustic/electrical technologies that put a spin on the normal and make it Rockford.
®
BLUETOOTH®
A2DP wireless audio streaming via the included dongle allows you to listen to audio from
any BLUETOOTH enabled device.
RF LINK
Rockford's proprietary RF Link is a bus-power component connection system enabling integration and control of all RF Link equipped products. The use of this system allows for the expansion of auxiliary controls and managed system turn on.
U.S. Patent (7,778,718,B2)
FREQUENCY NORMALIZATION OF AUDIO SIGNALS
Frequency normalization is achieved by characterizing the frequency response of the audio source based on a reference input signal. This reference input signal is used to establish a reference frequency response, which is stored in memory and used to select equalizer settings. The system restores missing spectral content by summing multiple input signals from the audio source. The system then normalizes the frequency response based on characterizations of the signal by utilizing equalizer settings from memory.
3SIXTY GRAPHIC USER INTERFACE (GUI)
INPUT CHANNEL CONFIGURATOR OUTPUT CHANNEL CONFIGURATOR
CHANNEL SUMMING CONFIGURATOR
ADJUSTING INPUT GAIN
3Sixty interactive graphic user interface allows for control of the crossover type, slope, high/low pass filter, the 248 band parametric eq, phase and time delay.
77
2015 BUYER'S GUIDE
3SIXTY.3 RF-BLD RFPEQU
INTERACTIVE SIGNAL PROCESSOR The 3sixty.3 interactive signal processor is the perfect solution for those customers who want to add aftermarket equipment to their factory source unit, integrate their mobile devices, or have complete control over their audio signal. With features like Bluetooth streaming, selectable crossover types and a USB interface, the versatility is endless.
BALANCED LINE DRIVER Rockford's 2 channel Balanced Line Driver improves the performance of any aftermarket or factory radio. Designed to eliminate system noise and compatible with high level (speaker) inputs or low level (RCA) inputs.
UNIVERSAL PUNCH EQ Looking to add Rockford's patented Punch EQ to any aftermarket audio system? Plus in need of features like high to low signal conversion, a line driver and auto turn-on.
HIGH TO LOW CONVERTER What happens when your radio isn't equipped with RCA inputs? Rockford offers high (speaker) to low (RCA) level converters in 2 or 4 channel versions.
RF-HLC4
Input/Output
AUX Inputs Input Voltage Output Voltage
8 Speaker/RCA
Stereo/Digital 2V-24V
3SIXTY.3 Balanced/Unbalanced (SPDIF)
8V RMS
Unbalanced/Balanced
Auto Turn-On
6V DC Offset
RF-BLD
2 Speaker/RCA Balanced/Unbalanced
N/A
RFPEQU
2 Speaker/RCA Balanced
N/A
RF-HLC4 4 Speaker/4 RCA
N/A
RF-HLC 2 Speaker/4 RCA
N/A
650mV-10.5V
11V RMS Unbalanced 22V RMS Balanced
6V DC Offset
600mV-10V
10V RMS Unbalanced 6V DC Offset
Up To 10.5v Up To 3v
N/A
Up To 10.5v Up To 3v
N/A
Remote Master or Sub Level/PEQ/ EQ Presets/Input
N/A
PEQ
N/A N/A
Dimensions H 1.75" x W 5.125" x L 9.25"
H 1.32" x W 5.90" x L 4.09" H 1.1" x W 3.15" x L 4.72" H 1" x W 1.56" x L 3.5" H 1" x W 3" x L 3.5"
BLUETOOTH / POWERED LOADED
UNIVERSAL STREAMING TO RCA
The RFBTRCA universal BluetoothTM adapter allows you to wirelessly stream media (music library, Pandora, Rhapsody, etc) from a BluetoothTM enabled device directly to an RCA input and is powered by a direct 12v power connection.
RFBTAUX
RFBTRCA
UNIVERSAL STREAMING TO AUXILLIARY
If your vehicle didn't come with built-in Bluetooth, now you can easily stream music from your smart phone, tablet, or laptop directly to the vehicle's AUX input, using our RFBTAUX Universal Bluetooth Adapter.
Cable Length RFBTAUX 5 ft.
RFBTRCA 3 ft.
AUX Output 1/8" Stereo Jack
1/8" Stereo Jack
Input Signal
BLUETOOTH V3.0+EDR
BLUETOOTH V3.0+EDR
USB Charging Voltage 5V/1A
N/A
POWERALL MOBILE DEVICE CHARGER
The Rockford Fosgate RFC-350 is the personal charging device everyone needs. Featuring a rechargeable 9000mAh battery pack, this device charger has all the needed power for the person on the go who often finds themselves without access to a charger or wall outlet. Able to charge mobile devices via a 5V micro USB connection up to 2.1 Amps, this compact unit has all the juice you need to keep your devices running. And speaking of running, this handy unit can help you even when your vehicle no longer does because of a dead or drained battery. It stores enough power to jump start a vehicle with up to 350 amps of output capability to get you back on the road. Additionally, it also features an LED flashlight with 3 modes of operation: Solid ON, Strobe and S.O.S.
Input Voltage RFC-350 5v/1A (USB)
Output Voltage
5v /2.1A (USB) 12v/350A
USB Charging Voltage
5V/1A
Dimensions 5.4"x3.3"x1"
79
2015 BUYER'S GUIDE
RFC-350
PUNCH POWERED LOADED
The PUNCH PS-8 amplified subwoofer enclosure is designed for those tight spaces where most woofer enclosures won't fit. With its low profile design and integration capabilities, this powered woofer system provides all the bass without taking up all the space, Mounting height is only 3.3" and comes with its own wiring kit!
PS-8
AVAILABLE IN 10" AND 12" POWERED LOADED SOLUTIONS
Punch Powered Loaded enclosures are the quick and easy to install bass solution to upgrade your factory or aftermarket stereo system.
Integrated grille included.
P300-12
Three different automatic turn-on modes; REM (+12V), DC Offset, and Audio Signal.
Speaker Size P300-10 10"
P300-12 12"
PS-8 8"
Rated Power
300 watts RMS/ 600 watts PEAK
300 watts RMS/ 600 watts PEAK
150 watts RMS/ 300 watts Peak
Signal Input
Auto Turn-On
Low-Level (RCA) or 12v REM, 6V DC Offset, High-Level (Speaker) Audio Signal
Low-Level (RCA) or 12v REM, 6V DC Offset, High-Level (Speaker) Audio Signal
Low-Level (RCA) or 12v REM, 6v DC High-Level (Speaker) Offset, Audio Signal
Remote
Included Punch Level Control (PLC)
Included Punch Level Control (PLC)
Included Punch LevelControl (PLC)
Dimensions H 13.3" x W 18.38" x L 9.37" H 14.96" x W 20.35" x L 11.5" H 3.3" x W 13.9" x D 9.4"
BTM3 WBMDWIREDCITREFCITTSFPIETASKPERESAKERS
INCLUDED Optional Mounting Bezel
The included in-line crossover is equipped with OEM connectors and either a 0dB (reference) or +3dB amplitude increase to the tweeter.
Multi-purpose connector; direct fit OEM connector or aftermarket spade terminal.
Speaker Size T3-BMW1 4"
T3-BMW2 4"
T3-BMW3 4"
Tweeter Size 1"
1"
1"
RMS Power Handling 50 watts
50 watts
50 watts
Peak Power Handling 100 watts
100 watts
100 watts
Frequency Response 75Hz - 20kHz
75Hz - 20kHz
75Hz - 20kHz
Sensitivity (1W/1M) 90dB
90dB
90dB
Sensitivity (2.83V/1M) 93dB
93dB
93dB
Mounting Depth 1.14"
1.25"
1.66"
81
2015 BUYER'S GUIDE
FLEXIBLE FITMENT SYSTEM
Utilizing three unique OEM frame styles creates a TRUE direct fit solution for 2004 and newer BMW vehicles.
FRAME STYLE ONE
EXAMPLE 6-SERIES
This system upgrade requires using all three frame styles to be able to replace all the factory speakers.
FRAME STYLE TWO FRAME STYLE THREE
VISIT ROCKFORDFOSGATE.COM/PRODUCTS/FITMENTGUIDE FOR:
Vehicle Fitment Guide
Make
Model
Year
Chassis
Installation Videos
T3-BMW1 T3-BMW2 T3-BMW3
POWER KITS
INTERCONNECTS
DISTRIBUTION
RF ACCESSORIES EXCEEDING THE STANDARD
The American Wire Gauge standard was developed to rationalize selecting wire for a particular purpose. In an electronic environment, wire size can have a significant impact on performance. Rockford Fosgate products are designed and engineered to perform at a superior level. It is only fitting that the accessories linking them together perform with the same expectation.
THE AMERICAN WIRE GAUGE STANDARD
The American Wire Gauge standard specifies the exact amount of copper needed to indicate a specific wire diameter or gauge. Rockford Fosgate accessories are all designed and engineered in accordance with the AWG specification.
ANATOMY OF WIRE
The construction of wire is broken out into three elements, strands, clusters and bundles. Varying these combinations will directly change the wire gauge and significantly effect the flexibility of the wire.
WIRE SIZE IMPACTS SYSTEM PERFORMANCE
The smaller the wire gauge (copper content) the greater the resistance which results in a loss in power to your amplifier(s) and speaker(s), thus creating a poor performing audio system!
1/0 AWG
4 AWG
8 AWG
10 AWG
RFK1D
RFK1D - Dual Amp Kit RFK1 - Power Only Kit
Dual Twisted Pair
RFK4I
RFK4D - Dual Amp Kit RFK4X - Complete Kit RFK4i - Power w/ Interconnect Kit RFK4 - Power Only Kit
Twisted Pair
RFK8I
RFK8X - Complete Kit RFK8i - Power w/ Interconnect Kit RFK8 - Power Only Kit
Coupler
RFK10I
RFK10i - Power w/ Interconnect Kit RFK10 - Power Only Kit
RFIT-20
· Available 3ft - 20ft Length · Y-Adapters
Battery Clamps
RFI-20
· Available 3ft - 20ft Length · Y-Adapters
Fuses
RFIS
· Couplers
Terminals
Battery Post Adapters
Fuse Holders
RFDB1
RFDB1 - 1/0 AWG +/Battery Clamp
RFFU30
· ANL Style 500-100A · MAXI Style 100-50A · AGU Style 60-30A
1/0 AWG
4 AWG
RFW4R
RFT1
· Set Screw - 1/0 AWG & 4 AWG · Crimp - 1/0 AWG, 4AWG & 8 AWG · Barrier Spades - 4 AWG & 8 AWG
RFDGM
RFDGM - GM Battery Post Adapter RFDGML - GM Battery Post Adapter for Double Stacked Terminals
8 AWG
Speaker Wire
RFFANL
RFFANL - Inline ANL or MAXI Fuse Holder RFFAGU - Inline AGU Fuse Holder RFFMAXI - Inline MAXI Fuse Holder RFFDAGU - Fused AGU Distribution Block RFD1 - 1/0 AWG Distribution Block RFD4 - 4 AWG Distribution Block
· Red or Black · 51ft Spool
Hybrid
RFW1R-51
· Red or Black · 100ft Spool
RFW4B
Electrolytic
· Red or Black · 250ft Spool
RFW8B
RFWP12
· 12 AWG, 16 AWG, 18 AWG · 250/1000 ft Spool or Packaged
Deadskin
Powerall
POWER WIRE
CAPACITORS / DEADSKIN
83
2015 BUYER'S GUIDE
ROCKFORDFOSGATE.COM
Don't forget to use our Amp Wire Calculator to optimize output with properly sized wire.
RFC10HB
RFC10HB - 10 Farad Hybrid Digital Capacitor RFC2D - 2 Farad Hybrid Digital Capacitor
RFC1
RFC1D - 1 Farad Digital Capacitor RFC1 - 1 Farad Capacitor
RFDS
RFDS - Sound Damping
Material 20' square feet
RFC350
POWERALL RFC-350 - Portable Charger/Car Jumper Cables
FOR ADDITIONAL INFORMATION ON ACCESSORIES, PLEASE VISIT ROCKFORDFOSGATE.COM
AMPLIFIERS SUBWOOFERS
SPEAKERS SOURCE UNITS
AMPLIFIERS SUBWOOFERS SPEAKERS SOURCE UNITS
SOURCE UNITS
AMPLIFIERS
Rockford's element ready product line takes into account the effects of the environment and takes measures to ensure lasting performance.
Alternate
Dust We make sure that displays and motor structures are sealed up tight so they look as clear as possible and perform day in and day out no matter how many times you hit the trails.
UV Inhibitor Materials Centrex and ASA plastic materials are used for their UV radiation resistance and components are tested in accordance with ASTM D4329 testing and certification procedures.
Thermal Shock Tested Products are tested for extreme temperature operation as well as severe fluctuations in ambient temperature. Components are taken to both low and high temperature extremes and then tested to ensure operational capabilities.
Stainless Hardware Stainless hardware is used due to its natural resistance to corrosion and rusting. This ensures that electrical connections will not degrade over time due to exposure to the elements.
Water Tested IPX5 and IPX6 Ratings allow for the components to be directly sprayed with water without water incursion.
Corrosion Protection (Speakers) Components are tested for salt spray corrosion resistance and conform to ASTM B117 certification.
Corrosion Protection (Electronics) Two part epoxy coated PCB boards prevent corrosion of critical components due to exposure in moisture rich environments.
Vibration Knowing our equipment will not be sitting still, we subject it to full vibration and shock testing to ensure that it will take abuse and keep performing to our stringent standards.
SOURCE UNITS Rockford's PMX series of source units and remotes are fully tested against UV radiation degradation as well as tested to IPX water intrusion standards. We also fully test the units for ever changing environmental conditions such as temperature extremes, as well as vibration testing to make sure they can take a bump and keep performing like a Rockord product should.
AMPLIFIERS Our Moto-marine amplifiers have not only the capabilities you expect a Rockford amp to have, but we have designed them to stand up to the environmental conditions you are likely to subject them to. With corrosion resistant stainless steel hardware and two-part epoxy coated circuit boards, these units are designed with you in mind. Whether on the lake, on the road or in the back woods these amplifiers are ready for an adventure.
SUBWOOFERS/SPEAKERS Rockford knows that when you shop for speakers for your boat, UTV or motorcycle, you are looking for something that is not only going to sound amazing but stand up to the elements. We specify high grade UV resistant materials for our speaker housings and grilles and make sure that they meet ASTM testing standards. We also subject them to salt spray (fog) testing to make sure that exposure to the environment will not cause issues with corrosion, both from a hardware or electrical connection standpoint.
SUBWOOFERS/SPEAKERS
87
2015 BUYER'S GUIDE
AAMMPPLILFIIEFRISERS
UNPRECEDENTED POWER AND CONTROL
dB/OCT
12 CROSSOVER SLOPE
2
YEAR
LIMITED WARRANTY
1
YEAR
FREE* EXTENDED WARRANTY
OHMS
2/1 IMPEDANCE STABILITY
HISTORY OF PERFORMANCE
dB/OCT
12 CROSSOVER SLOPE
YEAR
1 LIMITED WARRANTY
1
YEAR
FREE* EXTENDED WARRANTY
OHMS
4/2 IMPEDANCE STABILITY
dB/OCT
YEAR OHMS
THE PERFECT FIRST STEP
12 CROSSOVER SLOPE 1 LIMITED WARRANTY
4/2 IMPEDANCE STABILITY
*WITH QUALIFYING ROCKFORD FOSGATE INSTALLATION KIT PURCHASE
SAME GREAT PUNCH AMPLIFIERS IN AN ELEMENT READY PACKAGE
Punch is a name that has been synonymous with car audio for over 35 years. The mobile audio enthusiast in most cases is well versed in the quality and history of the Punch family of products. When we redesigned the mobile amplifier line in 2013 we knew that this new breed of Punch products would far surpass anything we had built previously. By integrating new circuit designs and developing our C.L.E.A.N. setup technology our engineers have created an amplifier family with capabilities not seen before.
Element Ready chassis. This new breed of Punch amplifier has all the amazing features as the mobile version but also now incorporates some of the necessary elements to help it withstand the off-road and on the water conditions. Featuring a brushed aluminum finish with UV inhibitors, a two-part epoxy coated circuit board and marine grade stainless steel hardware, these amplifiers are designed to give you all the performance you expect with the peace of mind that they will stand the test of time.
With the expansion of our Moto/Marine category this year, we wanted to offer that same amplifier offering, but in an
WHEN SIZE, POWER AND THE ELEMENTS ARE A
CONCERN THESE AMPLIFIERS HAVE YOU COVERED
Knowing your life isn't restricted to just the highways and byways, Rockford Fosgate introduces their new series of Element Ready small chassis Power amplifiers. Building on the successful launch of the Mobile audio version of these amplifiers last year and seeing how many of our customers were also using them in their motorcycles, UTVs and boat systems, the Rockford Engineers wanted to create a version that was geared more toward a life in the elements.
Our new Element Ready series of Power amplifiers have all the same benefits and features of their Mobile counterparts, but we've also added additional protective components knowing these are not likely to be safe in the trunk of your car. With features like a brushed aluminum chassis with UV inhibitors added to the finish to a Marine grade two-part epoxy coating on the circuit boards, these small chassis powerhouses will let you continue enjoying your tunes while hitting the trails or cruising the lake with friends.
MODELS SHOWN | TM500X1br, TM400X2ad
91
2015 BUYER'S GUIDE
MODELS SHOWN | PM1000X1bd, PM400X4, PM300X2, PM1000X5
PRIMED TO HIT THE ROAD, TRAILS OR LAKE AND DELIVER THE TUNES
Incorporating many of the technology elements that Rockford is known for, our Prime series of Element Ready amplifiers are an ideal choice if you are trying to build a system on a budget. With our high efficiency circuit design, these amplifiers are ideal for vehicles with limited electrical systems. They can easily exceed their power ratings giving you every watt you deserve and then some.
Built with a powder coated cast aluminum heat sink with integrated UV inhibitors and two part epoxy coated circuit boards, these amplifiers have been fully tested for all kinds of environmental conditions. Along with incorporating features such as variable crossovers and our famous Punch EQ circuit further completes the package making the Prime amplifiers a perfect choice for your system.
MODELS SHOWN | M1200-1D, M400-4D, M600X5
93
2015 BUYER'S GUIDE
THE GUTS OF AN AMPLIFIER
Organizing the combination of parts that make up the guts of an amplifier tremendously impacts its performance capabilities. A change in topology type matched with a variation of power supply components deliver a higher power output and enhanced audio quality. Rockford's proprietary amplifier topologies and electrical technologies in our amplifier lineup will drive your system to new heights.
HEAT SINK
CONFORMAL COATED CIRCUIT BOARD
MOSFETS POWER SUPPLY
MARINE GRADE
STAINLESS STEEL
TERMINALS
RCA
Heat Sink - This heavy outer shell protects the parts inside by transferring away the heat made reproducing an audio signal (music). Conformal Coated Circuit Board Sometimes referred to as the PCB, is used to connect this-to-that through tiny lines of copper across multiple layers of pathways. Marine Grade Nickel Plated Terminals These are the connection points for the speakers or subwoofers and the power source (battery) for the amplifier.
MOSFETs - A type of transistor used to amplify audio signal (music). You'll see more of these guys lined up as wattage demands increase.
BESt
Power Supply - A.K.A. the transformer, as the name suggest it takes the incoming voltage and converts it to a useable voltage for speakers.
RCA - These are the connection points for the audio signal (music) coming from the audio source (radio). RCA connectors are most commonly used.
GOOD
MATERIAL HIErARCHY
500WATTS
400WATTS
400WATTS
Extruded Aluminum w/ UV Inhibitors
Molex; Marine Grade Nickel Plated Set-Screw or Pigtail
Balanced Differential; High-Level Capable with Auto Turn -On
TO-220 MOSFETs w/MEHSATM
Ferrite Core Coated/Booted Transformer
4 Layer 2oz. Copper Circuit Board w/2-Part Epoxy Coating
*TM400X4ad MODEL SHOWN
4.3"
8.3" 1.6"
· Our small footprint design makes these an ideal choice when space is a concern such as on a motorcycle or UTV.
· Active heat management and forced air cooling ensures these amplifiers will deliver the power all day long.
6.8"
2"
9.1" · Designed with efficiency in mind, the Element Ready Prime amplifier
family produces high output power without excessively taxing your electrical system. · With a powder coated cast aluminum heat sink, epoxy coated circuit boards and stainless steel hardware these amplifiers are ready to hit the trails or the lake any time.
750WATTS 1200WATTS
600WATTS
Die-Cast Aluminum w/DTMTM and UV Inhibitors Marine Grade Nickel Plated Set-Screw Balanced Differential; High-Level Capable TO-220 Bipolar Transistors
Ferrite Core Transformer
2 Layer 2oz. Copper Circuit Board w/2-Part Epoxy Coating
*M750-1D MODEL SHOWN
300WATTS 500WATTS 1000WATTS
300WATTS 400WATTS 500WATTS
400WATTS 600WATTS
1000WATTS
Die-Cast Aluminum w/DTMTM and UV Inhibitors
Marine Grade Nickel Plated C-Clamp compression
Balanced Differential; High-Level Capable with Auto Turn-On
TO-220 MOSFETs w/MEHSATM
Ferrite Core Coated/Booted Transformer
4 Layer 2oz. Copper Circuit Board w/2-Part Epoxy Coating
*PM1000X1bd MODEL SHOWN
7.8"
2.4"
13.3"
· Using a marine grade two part epoxy coating on the circuit boards, we ensure that these amplifiers will continue to function without concern of corrosion or rust buildup.
· Marine grade stainless steel hardware is used for all electrical connections making sure that they remain corrosion free so your music will sound good no matter what environment your in.
6.8"
2" 11.1"
· Our ultra-efficient 4-channel amplifier design uses the latest full range Class D technology to provide crisp clear sounds without taxing the electrical system.
· Amplifiers are optimized for multi-channel systems layouts from simple to complex and are stable to 2 ohms per channel.
400WATTS 600WATTS
Die-Cast Aluminum w/DTMTM and UV Inhibitors Marine Grade Nickel Plated Set-Screw Balanced Differential TO-220 MOSFETs Ferrite CoreTransformer 2 Layer 2oz. Copper Circuit Board w/2-Part Epoxy Coating
*M600-4D MODEL SHOWN
96
Rated Power Frequency Response THD+N @ Rated Power Input Sensitivity S/N Ratio Channel Separation Dimensions Topology Circuit Board Variable Crossover Impedance Stability Protection Heatsink Design RCA Inputs Power Terminals Speaker Terminals Additional Features
[
[ AMPLIFIER SPECIFICATIONS
TM400X2ad TM400X4ad TM500X1br
200x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged
100x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged
175x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm
PM300X2 PM400X2 PM500X2 PM400X4 PM600X4
100x2 @ 4 ohms 150x2 @ 2 ohms 300x1 @ 4 ohms bridged
125x2 @ 4 ohms 200x2 @ 2 ohms 400x1 @ 4 ohms bridged
150x2 @ 4 ohms 250x2 @ 2 ohms 500x1 @ 4 ohms bridged
50x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged
75 x 4 @ 4 ohms 150 x 4 @ 2 ohms 300 x 2 @ 4-Ohm Bridged
PM1000x5 PM300X1 PM500X1bd PM1000X1bd
75x4 + 200x1 @ 4 ohms 125x4 + 400x1 @ 2 ohms N/A + 500x1 @ 1 ohm
200x1 @ 4 ohms 300x1 @ 2 ohms
150x1 @ 4 ohms 300x1 @ 2 ohms 500x1 @ 1 ohm
250x1 @ 4 ohms 500x1 @ 2 ohms 1000x1 @ 1 ohm
20Hz - 20kHz 20Hz - 20kHz
<1.0% 150mV - 12V >110dB <1.0% 150mV - 12V >110dB
>60dB
H 1.6" x W 4.3" x L7" (Compact chassis)
>60dB
H 1.6" x W 4.3" x L8.3" (Compact chassis)
Class ad w/
4 layer 2 oz. copper
Constant Power circuit board
20Hz - 20kHz <1.0% 150mV - 12V >110dB N/A
H 1.6" x W 4.3" x L8.3" (Compact chassis)
Class br
4 layer 2 oz. copper circuit board
20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz
<1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB
>50dB
H 2.4" x W 7.8" x L 9.9" (Mini chassis)
>50dB
H 2.4" x W 7.8" x L 9.9" (Mini chassis)
>50dB
H 2.4" x W 7.8" x L 9.9" (Mini chassis)
>50dB
H 2.4" x W 7.8" x L 9.9" (Mini chassis)
>50dB
H 2.4" x W 7.8" x L 9.9" (Mini chassis)
TRANS·ana
4 layer 2 oz. copper circuit board
20Hz - 20kHz 20Hz - 20kHz 20Hz - 250Hz 20Hz - 250Hz
<1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >105dB <1.0% 150mV - 12V >100dB <1.0% 150mV - 12V >100dB
>50dB
H 2.4" x W 7.8" x L 9.9" (Mini chassis)
N/A
H 2.4" x W 7.8" x L 9.9"
(Mini chassis)
N/A
H 2.4" x W 7.8" x L 9.9"
(Mini chassis)
N/A
H 2.4" x W 7.8" x L 9.9"
(Mini chassis)
TRANS·ana & Class bd TRANS·ana
Class bd
M400-4D M600-4D M600X5
75x4 @ 4 ohms 100x4 @ 2 ohms 200x2 @ 4 ohms bridged
100x4 @ 4 ohms 150x4 @ 2 ohms 300x2 @ 4 ohms bridged
50x4 + 200x1 @ 4 ohms 75x4 + 300x1 @ 2 ohms 150x2 + N/A @ 4 ohms bridged
20Hz - 20kHz 20Hz - 20kHz 20Hz - 20kHz
<0.1% 150mV - 4V >90dB <0.1% 150mV - 4V >90dB <1.0% 150mV - 12V >100dB
>50dB H 2.0" x W 6.8" x L 9.1"
Full Range Class d
>50dB H 2.0" x W 6.8" x L 11.1"
>50dB
H 2.0" x W 6.8" x L 13.2"
Class ab & Class d
M750-1D M1200-1D
250x1 @ 4 ohms 500x1 @ 2 ohms 750x1 @ 1 ohm
400x1 @ 4 ohms 800x1 @ 2 ohms 1200x1 @ 1 ohm
20Hz - 250Hz <1.0% 150mV - 4V >100dB N/A 20Hz - 250Hz <1.0% 150mV - 4V >100dB N/A
H 2.0" x W 6.8" x L 9.1"
Class d
H 2.0" x W 6.8" x L 11.1"
4 layer 2 oz. copper circuit board
Single layer 2 oz. copper circuit board
4 layer 2 oz. copper circuit board
12 dB/oct - variable High or Low Pass and All Pass
2 ohm stereo / 4 ohm mono rated
12 dB/oct - variable Low Pass 1 ohm mono rated
NOMAD circuit · Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
12 dB/oct - variable High or Low Pass and All Pass
2 ohm stereo / 4 ohm mono rated
NOMAD circuit · Reverse Polarity · Short Circuit · Thermal · Low Impedance · Under/Over Voltage
Dual fan forced induction cooling
High level capable with auto turn-on balanced differential RCA inputs
8 Ga. Quick Connect terminal
16 Ga. 4-pin Molex connector
Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)
10 Ga. nickel plated Quick Connect
Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Level Control(PLC2)
Focused mass die-cast heatsink / DTMTM- Dynamic Thermal Management / MEHSATM- Maximum Efficiency HeatSink Application
High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru
4 Ga. c-clamp compression connector
8 Ga. c-clamp compression connector
Punch EQ variable from 0dB to +18dB @ 45Hz and/or 0dB to +14dB @ 12.5KHz with optional Punch Level Control(PLC2)
12 dB/oct - variable High or Low Pass and All Pass
2 ohm stereo / 1 ohm mono rated
2 ohm mono rated
12 dB/oct - variable Low Pass 1 ohm mono rated
High level capable with auto turn-on balanced differential RCA inputs
High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru
High level capable with auto turn-on balanced differential RCA inputs
High level capable with auto turn-on balanced differential RCA inputs and RCA pass thru
Punch EQ variable from 0dB to +18dB @ 45Hz with optional Punch Level Control(PLC2)
12 dB/oct - variable High or Low Pass and All Pass
2 ohm stereo / 4 ohm mono rated
· Short Circuit · Thermal
12 dB/oct - variable High or Low Pass and All Pass
2 ohm stereo / 4 ohm mono rated(Front/Rear) and 2 ohm mono rated(Sub)
· Short Circuit · Thermal
12 dB/oct - variable Low Pass 1 ohm mono rated 12 dB/oct - variable infrasonic
· Short Circuit · Thermal
Focused mass die-cast heatsink
RCA input and RCA pass thru
4 Ga. set-screw connector
10 Ga. set-screw connector
Punch EQ variable from 0dB to +18dB @ 45Hz
Focused mass die-cast heatsink Focused mass die-cast heatsink
RCA input or speaker level pigtailed Molex connector input
RCA input and RCA pass thru
4 Ga. set-screw connector
4 Ga. set-screw connector
10 Ga. set-screw connector
10 Ga. set-screw connector
Punch EQ selectable from 0dB/+6dB/+12dB @ 45Hz(Front/Rear) and Variable from 0dB to +12dB @ 45Hz(Sub)
Punch EQ variable from 0dB to +18dB @ 45Hz and included Punch Level Control(PLC)
97
2015 BUYER'S GUIDE
ROCKFORDFOSGATE.COM
Don't forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.
SUBWOOFERS
SUBWOOFERS
HISTORY OF PERFORMANCE
YEAR
WATTS
300 UPTO RMS POWER HANDLING
1 LIMITED WARRANTY
2" VOICE COIL
24 XMAX M PEAK TO PEAK M
THE PERFECT FIRST STEP
YEAR
WATTS
200 UPTO RMS POWER HANDLING
1 LIMITED WARRANTY
2" VOICE COIL
14 XMAX PEAK TO PEAK M M
TURN YOUR BOAT INTO A "BOOMER" WITH THESE
PUNCH ELEMENT READY WOOFERS
Music without the low end is like eating a PB & J without the J. It's just not the same and doesn't feel complete. If you enjoy the full, rich sound of your audio system in your car, then why would you accept less in your boat or UTV system? This is where the Punch Family of Moto/Marine subwoofers come in. If you've had or heard our mobile line of Punch subs then you know that they have the capabilities of laying down the bass line and shaking the rust loose from any ride.
With our Element Ready versions you are now able to take that bass with you on the lake or on the trail and never go
without again. These versatile woofers are designed to work in sealed, ported and infinite baffle applications and are built to withstand the environment. Using UV resistant materials in the cone, surround and basket assemblies ensure that they will stand up under the summer sun and our sealed motor structure with stainless steel hardware prevent any moisture intrusion or corrosion from occurring making sure the bass hits hard every time. We even offer them in a Sport or Luxury grill version to better fit the aesthetics of any boat or UTV design.
WHETHER OFF-ROAD OR ON THE WATER, PRIME ELEMENT READY
WOOFERS HAVE YOUR BOTTOM LINE COVERED
Always looking to offer our customers choices, we introduced our Prime series of Element Ready woofers. These woofers are built using many of the same technologies as our Punch woofers but with the customer who may not be looking the Punch level sound in mind. If you want the Rockford experience without breaking the bank then these woofers will deliver.
Using ASA injection molded plastics for the baskets and grills, polypropylene cones and SantopreneTM surrounds all with integrated UV inhibitors ensures that these woofers will not break down over time due to exposure to the elements. Available in a variety of sizes and voice coil configurations, you're sure to find one that will fit the application you need.
LUXURY GRILLE SPORT GRILLE
MODELS SHOWN | PM212S4X, PM212S4B, PM210S4 101 2015 BUYER'S GUIDE
OPTIONAL COLOR
MODELS SHOWN | RM110D4B, RM112D4, RM18D4
MATERIAL HIErARCHY
anatomy OF A SUBWOOFER
Variations in the anatomy of a subwoofer dramatically changes its performance characteristics. An increase in voicecoil size coupled with a stronger cone material yields a higher power handling and increased output. By combining quality materials with Rockford's proprietary acoustic technologies, our subwoofer lineup is sure to meet your system's demands.
BASKET SPIDER
VOICE COIL
SURROUND CONE
MAGNET
BESt GOOD
Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in its place. Spider - Second part of the speakers suspension, connects the cone and voice coil to the basket and controls the travel of the cone assembly. Voice Coil - The brains of the operation, directing the force from the magnet to push or pull based on the applied electrical signal.
103 2015 BUYER'S GUIDE
Spider - Second part of the speakers suspension, connects the cone and voice coil to the basket and controls the travel of the cone assembly. Cone - A.K.A. the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality. Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.
Mineral Filled Polypropylene Cone with UV inhibitors Increased stiffness reduces distortion. High resistance to environmental conditions.
UV Stable Centrex Injection Molded Parts High Rigidity. Outstanding UV and weather resistance.
UV/ Salt Fog Resistant SantopreneTM Surround Long Life Span. Ideal For changing environmental conditions.
Moisture, Tear and Fatigue Resistant Aramid Fiber Spider High strength. Maintains flexibility w/ changing temperatures.
SINGLE 4
250-300 RMS POWER RANGE
Tall Profile, SantopreneTM w/ VASTTM Injection Molded Polypropylene w/ UV Inhibitors Single Nomex Blend w/ Multipoint Stitched Lead Wire 2" 4-Layer High Temp. KaptonTM w/ NomexTM collar 100% UV Stable Centrex Injection Molded Plastic Shielded Ferrite Magnet Structure
*PM212S4 MODEL SHOWN
DUAL 2 DUAL 4
150-200 RMS POWER RANGE
UV and Salt/Fog Resistant, SantopreneTM w/ VASTTM Injection Molded Carbon Fiber Filled Polypropylene w/ UV Inhibitors Single Aramid Fiber w/ Multipoint Stitched Lead Wire 1.5/2.0" 4-Layer High Temp. Aluminum w/ NomexTM collar 100% UV Stable ASA Injection Molded Plastic Ferrite Magnet Structure
*RM112D4 MODEL SHOWN
WATTS
WATTS
Speaker Size Nominal Impedance Xmax (mm) Sensitivity RMS Power Handling (watts) Peak Power Handling (watts) Mounting Diameter Mounting Depth Speaker Displacement (cu. ft.) Sealed Enclosure (cu. ft.) Ported Enclosure Surround Material Dustcap Material Cone Material Voice Coil Spider Frame Structure Motor Structure Terminal Connectors Trim Ring
[
[ SUBWOOFER SPECIFICATIONS
PM210S4/ PM210S4B/ PM210S4X
10"
PM212S4/ PM212S4B/ PM212S4X
12"
Single 4 Single 4
10 86 dB 250
500
9.13"
5.54" 0.154
0.75
1.25 cu. Ft. Port: (1) 4" x 8.52" Infinite Baffle Compatible
Tall Profile, Santoprene with VAST
12 87 db 300
600
11.25" 6.58" 0.258
1
1.5 cu. Ft. Port: (1)3" x 5.74" Infinite Baffle Compatible
RM18D2/ RM18D2B/
RM18D4/ 8"
Dual 2 or 4
7
85 dB 150
400
9.13"
4.4"
0.06
0.75
1.4 cu ft. Port: (1) 3"x8"
RM18D4B
RM110D2/
RM110D2B/ RM110D4/
10"
Dual 2 or 4
7
89 dB 200
500
11.25" 5.1"
0.150
1.02
1.79 cu ft. Port: (1) 4"x9.3"
RM110D4B
RM112D2/
RM112D2B/ RM112D4/
12"
Dual 2 or 4
7
89 dB 200
500
9.13"
4.3"
0.101
0.59
1.40 cu ft. Port: (1) 4"x13"
RM112D4B
UV and Salt Fog Resistant Co-Molded Santoprene Surround
Injection Molded Polypropylene
Injection Molded Polypropylene
2" 4-layer high temp, aluminum voice coil with Kapton former and spun-laced Nomex insulating reinforcement collar
Tear & fatigue resistant Nomex blend spider with Centrex multipoint stitched lead wire technique
Shielded ferrite magnet structure with extended vented pole and bumped backplate
Proprietary gold plated compression terminal. 8 Ga.
Water draining Centrex trim ring with integrated stainless steel grill or luxury grill option
Injection Molded Polypropylene
Injection Molded Carbon Fiber Filled Polypropylene Cone Body with UV Inhibitors
1.5" 4-layer high temp. copper voice coil with aluminum former
Tear & fatigue resistant poly-cotton spider with multipoint stitched lead wire technique and spider cooling vents
100% UV Stable ASA Injection Molded Plastic
Ferrite magnet structure with extended pole piece, vented aluminum voice coil former and bumped backplate
2" 4-layer high temp. aluminum voice coil with spun-laced NomexTM insulating reinforcement collar
Proprietary Corrosion Resistant Spring Loaded Push Terminals. 12 Ga.
Water draining ASA trim ring with integrated grill
105 2015 BUYER'S GUIDE
ROCKFORDFOSGATE.COM
Don't forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.
SPEAKERS
SPEAKERS
HISTORY OF PERFORMANCE
YEAR
WATTS
150
UP TO RMS POWER HANDLING
1 LIMITED WARRANTY
40 - 22 FREQUENCY
RESPONSE
Hz
kHz
THE PERFECT FIRST STEP
YEAR
WATTS
75
UP TO RMS POWER HANDLING
1 LIMITED WARRANTY
49 - 20 FREQUENCY
RESPONSE
Hz
kHz
BE THE ENVY OF THE CAMPSITE OR THE SANDBAR WITH OUR PUNCH ELEMENT READY SPEAKERS
If you're someone who truly enjoys their music one way and that way is all the way up then you need to look at the Punch family of Moto/Marine speaker and wake tower cans. These Element Ready speakers are designed to hold up under the harshest conditions and still belt out your music just the way you like. Using many of the same construction materials found on our Marine woofers you can rest assured they will keep on rocking regardless of a little mud or water getting on them.
If you want to really crank up the party then our wake tower speaker enclosures are just the thing you need. Available with our new horn loaded or coaxially mounted component design, these cans will make you the envy of the lake or campsite.
BIG THINGS TRULY DO COME IN SMALL PACKAGES.
Our new Element Ready Prime series of speakers shows that you don't have to blow your yearly budget just to get good sound out of your audio system especially when it has to live in an environment such as your boat, UTV or even your motorcycle. We've designed these speakers with efficiency and output in mind. Available with two different tweeter sizes and power handlings, these speakers can belt out the tunes without needing an amplifier the size of a nuclear power plant.
Using UV inhibitor based materials and corrosion resistant hardware these speakers are designed with the person who lives for the outdoors in mind. So if you're looking for a speaker that is built with the quality and to the standards the Rockford expects of all its products and will stand up to your active lifestyle then these are the speakers for you.
LUXURY GRILLE SPORT GRILLE SPORT GRILLE HORN TWEETER SPORT GRILLE DOME TWEETER RM1652 RM0652
MODELS SHOWN | PM282W, M262-WAKE, PM282HW, PM282B, PM262, PM282X
OPTIONAL COLOR 109 2015 BUYER'S GUIDE
OPTIONAL COLOR
OPTIONAL COLOR
MODELS SHOWN | RM1652B, RM0652
OPTIONAL COLOR
OPTIONAL COLOR
MATERIAL HIErARCHY
framework OF A SPEAKER Modifications to the framework of a speaker significantly impact its sonic signature. Combining various materials will strengthen, add volume and resonate the music to a desired sound. By intertwining superior speaker designs with Rockford's proprietary acoustic technologies in our speaker lineup we are sure to bring your music to life.
SURROUND TWEETER CROSSOVEr
BESt GOOD
Tweeter - Composed of the same parts as an speaker, surround, cone, voice coil, basket and magnet. Just on a smaller scale. Crossover - Works like a switch board, directing the audio signal through caps, filters and switches to the appropriate speaker. Surround - Works in harmony with the spider, attached to the cone to maintain the centering of the voice coil in the magnetic gap.
111 2015 BUYER'S GUIDE
CONE
BASKET MAGNET
Cone - A.K.A the diaphragm, this is the voice of the speaker. Shape and material dramatically change tonality. Basket - Also referred to as the frame or chassis, this is the skeletal system of the speaker. Here to keep everything in their place. Magnet - The heart of speaker, creating the force to push and pull cone assembly. Size, material, and design may differ, depending on performance goals.
HORN WAKE
2WAY 8.0"
· Our high output horn tweeter and midrange speaker assembly with their Neodymium motor structures are designed for high volume applications.
· Enclosures are constructed of high density poly-ethylene, have a paint and clear coat finish with integrated UV inhibitors and are available in black or white colors (Same as PM282W wake speakers).
Coaxially mounted horn loaded tweeter w/ Neodymium motor structure
High Quality 6dB High pass crossovers using Metalized Polyester Film Capacitors
UV & Salt-Fog resistant TPE (Thermo Plastic Elastomer) surround w/ VASTTM
Injection molded mineral filled polypropylene with UV inhibitors
High Density Poly-ethylene Enclosure with UV Inhibitors
Hi power Neodymium magnet structure
*PM282HW MODEL SHOWN
WAKE
2WAY 8.0"
· Our 8 inch full range cans come loaded with our PM282 speakers and produce crisp and clear full range sound for those not only in the boat but out as well.
· Our 8 inch cans ship with a surface mount bracket included and an optional tubular clamp is also available for wake tower mounting.
· Mounting assemblies feature security Torx hardware, safety lanyards and 359 degree rotation capabilities for directional adjustments.
Bridge mounted component grade coated aluminum alloy tweeter
Integrated 6/12 dB per octave sealed crossover.
UV & Salt-Fog resistant TPE (ThermoPlastic Elastomer) surround w/ VASTTM Injection molded mineral filled polypro pylene with UV inhibitors
High Density Poly-ethylene Enclosure with UV Inhibitors
Hi power Ferrite magnet structure
*PM282W MODEL SHOWN
WAKE
2WAY 6.0"
Bridge mounted component grade coated aluminum alloy tweeter
Integrated 6/12 dB per octave sealed crossover.
UV & Salt-Fog resistant TPE (ThermoPlastic Elastomer) surround w/ VASTTM
Injection molded mineral filled polypropylene with UV inhibitors
High Density Poly-ethylene enclosure with UV Inhibitors
Hi power Ferrite magnet structure
*PM262-WAKE MODEL SHOWN
· Our 6 inch full range wake cans use our PM262 full range speaker and are available in black or white finishes.
· The 6 inch can assemblies are shipped with both a surface mount and tubular clamp assembly for versatile mounting options.
2WAY 6.0" 8.0"
Bridge mounted component grade coated aluminum alloy tweeter
Integrated 6/12 dB per octave sealed crossover.
UV & Salt-Fog resistant TPE (ThermoPlastic Elastomer) surround w/ VASTTM Injection molded mineral filled polypropylene with UV inhibitors
100% UV stable CentrexTM injection molded plastic
Linear, high excursion matched motor magnetics and suspension design
*PM262 MODEL SHOWN
113 2015 BUYER'S GUIDE
· The PM2 full range speakers incorporate a 1 inch aluminum alloy component tweeter, coaxially mounted over the midrange, to produce crisp and clear full range sound for you to enjoy while relaxing on the water.
· To compliment your vehicle's interior the PM2 full range speakers are available in both a black and white sport grill and a white luxury grill option.
2WAY 6.5"
· Our Marine RM1 full-range speakers are perfect for anyone looking to add some FANATIC sound to their vessel or side-by-side.
· With our specially designed volcano dome LCP tweeter the RM1 speakers produce crystal clear highs even when rocketing across the lake or racing up the sand dunes.
Grill Integrated Proprietary LCP Dome Tweeter
High Quality 6dB High pass crossovers using Metalized Polyester Film Capacitors
UV and Salt Fog Resistant Co-Molded Santoprene Surround w/ VASTTM
Injection molded Carbon Fiber filled polypropylene with UV inhibitors
100% UV stable ASA injection molded plastic
Linear, high excursion matched motor magnetics and suspension design
*RM1652 MODEL SHOWN
2WAY 6.5"
· Our 2-way component system with a coaxially integrated tweeter is built using stringent marine grade weather proofing technologies to ensure the speakers will perform under the harshest conditions.
· Using high grade internal crossover components ensures that both the tweeter and midrange produce high quality sound and play the frequencies they are supposed to..
Grill Integrated LCP Dome Tweeter
High Quality 6dB High pass crossovers using Metalized Polyester Film Capacitors
UV and Salt Fog Resistant Co-Molded Santoprene Surround w/ VASTTM
Injection molded Carbon Fiber filled polypropylene with UV inhibitors
100% UV stable ASA injection molded plastic
Linear, high excursion matched motor magnetics and suspension design
*RM0652 MODEL SHOWN
Speaker Size Tweeter Size RMS Power Handling (watts) Peak Power Handling (watts) Frequency Response Sensitivity (1W/1M) Sensitivity (2.83V/1M) Mounting Depth Surround Material Cone Material Spider Frame Structure Motor Structure Tweeter Crossover Terminal Connectors
[ [
[ SPEAKER SPECIFICATIONS
PM262/ PM262B/ 6" PM262X
PM282/ PM282B/ 8" PM282X
1.0" 75 watts 150 watts 53Hz - 22kHz 1.0" 100 watts 200 watts 48Hz - 22kHz
88 dB 90 dB
91 dB 2.8" 93 dB 3.4"
UV & Salt-Fog resistant TPE (Thermo-Plastic Elastomer) Santoprene surround
Injection molded mineral filled polypropylene cone body with UV inhibitors
Moisture, tear and fatigue resistant aramid fiber spider
RM0652/ RM0652B
6.5"
.5"
50 watts
RM1652/ RM1652B
6.5"
1.0"
75 watts
100 watts 52Hz - 20kHZ 88 dB 150 watts 49Hz - 20kHz 89 dB
91 dB 2.5"
92dB
2.5"
UV and Salt Fog Resistant Santoprene Surround
Injection molded mineral filled polypropylene cone body with UV inhibitors
Moisture, Tear and Fatigue Resistant Aramid Fiber Spider
[ WAKE SPEAKER SPECIFICATIONS
Speaker Size Nominal Impedance RMS Power Handling (watts) Peak Power Handling (watts) Dimensions (HxWxD)
PM282W/ PM282W-B WAKE CANS
8" woofer/ 1" Aluminum Tweeter
PM282HW/ PM282HW-B HORN WAKE CANS
8" woofer/ 1" Horn Tweeter
4 100 watts 200 watts 14.2" x 9.1" x 10.09" 4 150 watts 300 watts 14.2" x 9.1" x 10.09"
M262-WAKE/ M262B-WAKE WAKE CANS
6" woofer/ 1" Aluminum Tweeter
4 75 watts
150 watts 10.96" x 7.03" x 11.26"
UV stable CentrexTM 814 injection molded plastic parts
Linear, high excursion matched motor magnetics and suspension design
1" (25mm) bridge mounted component grade coated aluminum alloy tweeter
Integrated 6/12 dB per octave sealed crossover.
Corrosion resistant gold plated polarized input terminals
100% UV Stable ASA Injection Molded Plastic Parts
Linear, high excursion matched motor magnetics and suspension design
Grill Integrated 1" Proprietary LCP Dome Tweeter
Grill Integrated 0.5" LCP Dome Tweeter
High Quality 6dB High pass crossovers using Metalized Polyester Film Capacitors
Proprietary Corrossion Resistant Spring Loaded Push Terminals
115 2015 BUYER'S GUIDE
ROCKFORDFOSGATE.COM
Don't forget to use our Woofer Wiring Wizard to properly wire woofers to your amplifier or our Woofer Box Advisor for optimized enclosure bass performance.
SOURCE UNITS
DESIGNED AND ENGINEERED WITH A PURPOSE AND YOU IN MIND
Rockford has long recognized a person's desire to easily connect with their music. With that in mind we set out to create a purpose built line of Moto/ Marine source units equipped with all the latest technology and features. In looking at the market, we saw that many of the source units being used in Moto/Marine applications were simply repurposed mobile audio units and know that they were not originally designed to be in a boat, UTV or motorcycle environment. This is why Rockford decided to take the ground up approach in designing this new source unit line.
From a hardware standpoint we talked to both industry professionals and the consumers who use these products to determine what worked and more importantly what didn't. From this we designed several units with varying capabilities to suit the needs of our customers from a simple streaming receiver to a hide-away control box with remote display. We also designed the software and menu system from the ground up making the menus easy to use and access. The last thing you want is to be shooting down the trail fumbling through a complex menu system. If you are looking for a high quality source unit with a purpose specific design to be the heart of your system then look no further.
MODELS SHOWN | PMX-1R, PMX-5, PMX-2, PMX-8DH, PMX-0R 119 2015 BUYER'S GUIDE
MATERIAL HIErARCHY
DNA
OF A SOURCE UNIT
A source unit is the heart of any good sound system and flexibility, features and ease of operation of are often at the top of the list of any customer when it comes time to decide on which one to use. Rockford has designed their new Marine grade source units from the ground up with user friendly menu designs, input and output flexibility as well as multi-zone/ multi-source controllability.
ZONE/SOURCE CONTROL MEMORY
EQUALIZATION
DISPLAY 5"
INPUT SIGNAL
MOUNTING SYSTEM DEPTH
BESt GOOD
DISPLAY - The display is how you receive
5"
information from the unit and see the settings for the internal menus. It can
also display signal and song information
if available.
INPUT SIGNAL - The number and types of input signals a source unit can accept help determine its flexibility in a system design and help you determine if it will fit your needs.
MEMORY - The internal circuit that retains all settings and stations when power is no longer applied to the unit.
121 2015 BUYER'S GUIDE
ZONE/ SOURCE CONTROL - A unit with multi-Zone/ Source control provides for more flexibility in system designs by creating different zones of the system and allowing different sources to be played in them.
EQUALIZATION - The equalizer allows you to tune the system to your taste via a multi-band EQ or our own proprietary Punch EQ circuit.
MOUNTING SYSTEM - The system by which the unit mounts into the vehicle and depth of the chassis helps to determine where you can mount the unit.
Full Function Wired Display Head
· This full function display head is specifically designed for use with our PMX-8BB and allows total access to all its functions and features.
· Its large 5 inch display makes it easy to see what's on as well as navigate the custom menus.
5" Ultrabright Color TFT Display, IPX6
5"
Certified Faceplate, Optical
Wet Bonded
N/A
N/A
N/A
N/A
Thru-hole surface mount, Rear bolt thru mounting plate/ .625" mounting depth
*PMX-8DH MODEL SHOWN
Hide-Away Digital Media Receiver
N/A
5"
Bluetooth, SiriusXM, Pandora, iPod iPhone, Dual USB, Aux, A/V, AM/FM/WB EEprom memory with zero current draw on power down Nitrile Rubber
4-Zone/ 2-Source
7 Band Equalization + PEQ2
Surface mount/ Hideaway Black Box w/2.2" height
PMX-8BB MODEL SHOWN
· When joined with the PMX-8DH this hide-away black box unit is a feature rich command center for your entire audio system.
· Whether installing a small system or a complex multi zone system, this unit has the features and functionality you're looking for.
2.7" Full Color TFT Display IPX6 Certified
5"
Faceplate, Optical Wet Bonded
Bluetooth, SiriusXM, Pandora, iPod iPhone, Dual USB, Aux, A/V, AM/FM/WB
EEprom memory with zero current draw on power down
2-Zone/ 2-Source
7 Band Equalization + PEQ2
Thru-hole surface mount, Rear bolt thru mounting plate/ 7.25" mounting depth
*PMX-5 MODEL SHOWN
Digital Media Receiver With Oversized Display
· With its oversized display and single DIN chassis this multimedia receiver is designed for ease of use with a built from the ground up GUI and menu system.
· If a true multi zone/ multi source capable source unit is what you're looking for then this unit has you covered.
2.7" Full Color TFT Display IPX6 Certified
5"
Faceplate, Optical Wet Bonded
Bluetooth, Pandora, iPod/iPhone, USB, Aux, AM/FM/WB
EEprom memory with zero current draw on power down
2-Zone/ 1-Source
7 Band Equalization + PEQ2
Thru-hole surface mount, Rear bolt thru mounting plate, Gauge style C-Clamp/ 3" mounting depth
*PMX-2 MODEL SHOWN
123 2015 BUYER'S GUIDE
Compact Digital Media Receiver
· This compact receiver is perfect when you need the functionality of a multimedia unit without the size typically associated with them.
· Its multiple mounting options allow for versatility wherever you need to install it.
Ultra Compact Digital Media Receiver
· This compact streaming audio receiver is ideal if you typically play music via your Bluetooth enabled device.
· Its small size and mounting footprint make it ideal when real estate is tight.
N/A
5"
Bluetooth, USB, Aux
N/A
2-Zone/ 1-Source
N/A
Thru-hole surface mount, Rear bolt thru mounting plate, Gauge style C-Clamp/ 3" mounting depth
*PMX-0 MODEL SHOWN
Full Function Wired Remote
· This full function remote control is designed to give you access to all the same controls and settings you get on the primary receiver units.
· Up to three remote units can be connected to and are designed to work with the PMX-8BB, PMX-5 and PMX-2 units.
2.7" Full Color TFT Display IPX6 Certified
5"
Faceplate, Optical Wet Bonded
N/A
N/A
Multi-Zone/Source control via source unit
N/A
Thru-hole surface mount, Rear bolt thru mounting plate, Gauge style C-Clamp/ 3" mounting depth
*PMX-1R MODEL SHOWN
N/A
5"
N/A
N/A
N/A
N/A
Thru-hole surface mount, Rear bolt thru mounting plate/ 7.25" mounting depth
*PMX-0R MODEL SHOWN
Wired Remote
· When a compact remote unit is needed for simple control of your multimedia receiver units, the PMX-0R is ideal.
· Up to three remote units can be connected to and are designed to work with the PMX-8BB, PMX-5 and PMX-2 units.
SOURCE UNIT SPECIFICATIONS
Description
Features
Dimensions
PMX-8DH
Full Function Wired Display Head w/ 5" Hi-Res Color Display
Illuminated Waterproof Rotary Encoder Volume Control, Front Panel Sub Control, Front Panel Illumination Control, Ultra Slim Design, Tactile Inverted and Extraverted Buttons for Easy Identification, IPX6 Certification, Back Lit LED Button Illumination
H 4.63" x W 8.00"
PMX-8BB
Hide-away box Digital Media Receiver for PMX-8DH 50 watts x 4
Global AM/FM/WB Tuner, SiriusXM Ready, Full iOS/Andriod, Made for iPod, Dual USB Input w/ Video Playback, BLUETOOTH avrcp 1.5, 2-Source Zone Control, 4-Zone Volume Control, 6 Channel F/R/S 4V Zone 1&2 Preouts, 2 Channel Zone 3&4 4V Preouts, 7-Band Graphic Equalizer, Punch EQ, A/V Input, Video Output, CAN Ready, Remote Control Ready, EEPROM NonVolatile Memory,Wired Illumination Control, Steering Wheel Control Ready
H 2.20" x W 8.24" x D 6.86"
PMX-5
Digital Media Receiver w/ 2.7" Full-color Display 50 watts x 4
Global AM/FM/WB Tuner, SiriusXM Ready, Full iOS/Andriod, Made for iPod, USB Input, BLUETOOTH avrcp 1.4, 2-Source Zone Control, 6 Channel F/R/S 2V Zone 1 Preouts, 2 Channel Zone 2V Preouts, 7-Band Graphic Equalizer, Punch EQ, CAN Ready, Remote Control Ready, EEPROM Non-Volatile Memory, Front Panel Sub Control, Front Panel & Wired Illumination Control, Illuminated Waterproof Rotary Encoder Volume Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination, Steering Wheel Control Ready
DIN size chassis w/ 1.75 DIN face H 3.50" x W 8.00"
PMX-2
Compact Digital Media Receiver w/ 2.7" Full-color Display 50 watts x 4
Global AM/FM/WB Tuner, Full iOS/Andriod, Made for iPod, USB Input, BLUETOOTH avrcp 1.4, 4 Channel (Front and selectable Rear/Sub Channel) 2V Preouts, 7-Band Graphic Equalizer, Punch EQ, CAN Ready, Remote Control Ready, EEPROM NonVolatile Memory, Front Panel Sub Control, Front Panel & Wired Illumination Control, Waterproof Rotary Encoder Volume Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination
H 3.95" x W 4.33"
PMX-0
Ultra Compact Digital Media Receiver
AUX Input, BLUETOOTH avrcp 1.4, 4 Channel (Front and selectable Rear/Sub Channel) 2V Preouts, Front Panel Sub Control, Front Panel Illumination Control, Waterproof Rotary Encoder Volume Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination
H 2.25" x W 4.00"
PMX-1R
Full Function Wired Remote w/ 2.7" Full-color Display for PMX-8BB, PMX-5, PMX-2
Multi Zone Control (PMX-5 & PMX8), Front Panel Sub Control, Waterproof Rotary Encoder Volume Control, Front Panel Illumination Control, IPX6 Front Panel Certification, Back Lit LED Button Illumination
H 3.95" x W 4.33"
PMX-0R
Wired Remote for PMX-8BB, PMX-5, PMX-2
Front Panel Sub Control, Waterproof Rotary Encoder Volume Control, Front Panel Illumination Control, IPX6 Front Panel Certification, Back lit LED Button Illumination
H 2.25" x W 4.00"
125 2015 BUYER'S GUIDE
COMPLETE AUDIO KITS INSTALLATION KITS SPEAKER ADAPTERS
COMPLETE AUDIO KIT
COMPLETE AUDIO KIT
2-CH SYSTEM [ R1-HD2-9813 ]
(1) 140 Watt 2-Channel Amplifier
With 2 speakers, mounting plate and wiring harness.
4-CH SYSTEM [ R1-HD4-9813 ]
(1) 160 Watt 4-Channel Amplifier
With 4 speakers, mounting plate and wiring harness
129 2015 BUYER'S GUIDE
140
RF ACCESSORIES
RFKHD9813
MOUNTING PLATE AND WIRING HARNESS
· The RFKHD9813 amplifier installation kit works with both the Power small chassis and PUNCH PBR series amplifiers. · The aluminum mounting plate adds additional thermal mass to the amplifier's heat sink to improve performance and power output. · This complete installation kit includes an amplifier mounting plate and hardware, pre-terminated power and ground wires and
pre-terminated speaker wires.
160
*TM400X4ad Shown
*PBR300X4 Shown
FITS HARLEY - DAVIDSON® MODELS
1998
2013
Ultra Classic® Electa Glide® Street Glide® Tri Glide® Road Glide® Road Glide Ultra®
AMPLIFIER/SPEAKER INSTALLATION KIT
SUGGESTED AUDIO SYSTEMS
MOUNTING KIT
RECOMENDED 4-CH SYSTEM
(1) 300 Watt 4-Channel Amplifier
PBR300X4
(4) Speakers
P1675
(1) Amplifier Mounting Plate With Wiring Kit
RFKHD9813
(4) Direct Fit Front Speaker Adapters
PMSA675
RECOMENDED 2-CH SYSTEM
(1) 300 Watt 2-Channel Amplifier
PBR300X2
(2) Speakers
P1675
(1) Amplifier Mounting Plate With Wiring Kit
RFKHD9813
(2) Direct Fit Front Speaker Adapters
PMSA675
3
3
INTEGRATE
RFKHD9813
PMSA675
RECOMENDED 4-CH SYSTEM
(1) 400 Watt 4-Channel Amplifier
T400X4ad or TM400X4ad
(4) Speakers
T1675
(1) Amplifier Mounting Plate With Wiring Kit
RFKHD9813
(4) Direct Fit Front Speaker Adapters
PMSA675
131 2015 BUYER'S GUIDE
MOUNTING KIT
INTEGRATE
RFKHD9813
PMSA675
RF ACCESSORIES
Speaker Adapter Rings
· Our PMSA Haley Davidson speaker adapter rings allow you to easily upgrade your factory speaker. · Designed for a direct fit application they perfectly align with the factory speaker mounting holes. · They allow you to install a variety of Rockford Power, Punch and Prime speaker from 6.0 to 6.75 inches.
PMSA65
T16
P16
N/A
T165
P165
FITMENT GUIDE
FITMENT GUIDE
T1650*
P1650
T1675*
P1675
*T1650 and T1675 Will not fit the Road Glide® models
R165X3
PMSA675
FITS HARLEY - DAVIDSON® MODELS
1998
Ultra Classic® Electa Glide® Street Glide® Tri Glide® Road Glide®
2013 Road Glide Ultra®
Acrobat 11.0.10