Emerson HD7097 Personal CD, CD-R/RW Player

Introduction

Thank you for purchasing this Emerson Personal CD, CD-R/RW Player. It features a 24-track programmable memory, Random playback, 3-way Repeat, 45-Second Joggable Anti-Skip Protection, Dynamic Bass Boost Control, and comes with lightweight stereo headphones.

Please read this manual carefully to ensure proper operation and enjoy all features. The serial number can be found on the bottom cabinet.

Model Number: HD7097

Serial Number: [Space for serial number]

Visit our website: www.emersonradio.com

Important Notes

WARNING: TO PREVENT FIRE OR SHOCK HAZARD, DO NOT EXPOSE THIS UNIT TO RAIN OR MOISTURE.

Avoid installing the unit in locations described below:

• Places exposed to direct sunlight or close to heat radiating appliances such as electric heaters.
• Dusty places.
• Places subject to constant vibration.
• Humid or moist places.

CLASS 1 LASER PRODUCT

This product contains a low power Laser Device.

CAUTION: INVISIBLE LASER RADIATION WHEN OPEN AND INTERLOCKS DEFEATED. AVOID EXPOSURE TO BEAM.

CAUTION: THIS LASER COMPACT DISC PLAYER FUNCTIONS BY HELP OF INVISIBLE LASER LIGHT AND IS EQUIPPED WITH SAFETY SWITCHES TO AVOID EXPOSURE WHEN DOOR IS OPEN AND SAFETY INTERLOCKS ARE DEFEATED. IT IS DANGEROUS TO DEFEAT OR BYPASS SAFETY SWITCHES.

DANGEROUS VOLTAGE: Uninsulated Dangerous Voltage, that may be of sufficient magnitude to constitute a risk of electric shock to persons is present within this product's enclosure.

ATTENTION: The Owner's Manual contains important operating and maintenance instructions. For your safety, it is necessary to refer to the manual.

This device complies with part 15 of the FCC rules. Operation is subject to the condition that this device does not cause harmful interference.

Location of Controls and Indicators

A diagram shows the player's controls. The controls are numbered 1 through 16:

• 1. DBBS (Bass Boost) ON/OFF Switch: Turns Bass Boost On to increase bass response.
• 2. VOLUME (+ / – ) Buttons: Raise or lower the volume.
• 3. PHONES (Headphone) Jack: Connect stereo headphones.
• 4. LINE OUT Jack: Connect to an external amplifier or recording device (connection cable not included).
• 5. STOP Button: Stops playback and turns the power Off.
• 6. ASP (Anti-Skip Protection) Button: Turns Anti-Skip system On or Off.
• 7. PROG (Program) Button: Programs tracks into the CD memory.
• 8. LCD Display: Shows track number, playing time, Joggable status, Battery Status, Program, Repeat, and Intro modes.
• 9. DC IN 4.5V Input Jack: Connect an AC adapter (not included) for 120V 60 Hz house current.
• 10. Battery Compartment: Located on the bottom cabinet.
• 11. MODE Button: Selects playback mode (Repeat 1/All, Random, or Intro).
• 12. PLAY/PAUSE Button: Starts or pauses playback.
• 13. SKIP ▶️▶️ Button: Skips tracks or searches forward.
• 14. SKIP ◀️ Button: Skips tracks or searches backward.
• 15. CD Door.
• 16. OPEN Switch: Slides to the right to unlock and open the CD door.

LCD Display Indicators

The LCD display shows various indicators:

• 1. INTRO Indicator: Appears when Intro playback mode is selected.
• 2. RAND (Random) Indicator: Appears when Random playback mode is selected.
• 3. PROG (Program) Indicator: Appears when programming tracks or playing programmed tracks.
• 4. VOL (Volume) Indicator: Appears when pressing VOLUME + /– buttons.
• 5. Track Number/Volume Level Display: Shows the current track, total tracks, and volume level (0 to 32).
• 6. Repeat 1/ALL Indicators: Appears when Repeat playback mode is selected.
• 7. Battery Level Indicator: Bars indicate battery level.
• 8. Anti-Skip Protection Indicator: A flashing icon indicates Anti-Skip Protection is activated.
• 9. CD-RW Indicator: Lights when playing a CD-RW disc.
• 10. Time Display: Shows elapsed time of the track and total playing time of the disc.

Power Source

The CD player can be operated using either a 120V 60Hz AC house current with an optional AC adapter (not included) or 3V DC (2 "AA" batteries, not included).

Battery Operation

1. Open the battery compartment door on the bottom cabinet by sliding and lifting it open. The door cannot be removed.

2. Insert 2 "AA" batteries (not included), using alkaline batteries for longest life. Ensure correct polarity as marked inside the compartment. Incorrect insertion will prevent operation.

NOTE: When operating on batteries, the optional AC adapter must be disconnected from the DC IN jack.

Battery Replacement

When batteries are weak, the 'bars' in the battery icon disappear. The indicator may flash, and operation may become erratic. Replace batteries immediately.

Battery Precautions

• Use only the specified battery size and type.
• Follow correct polarity when installing batteries. Reversed batteries may cause damage.
• Do not mix battery types (e.g., Alkaline and Carbon-Zinc) or old and fresh batteries.
• If the device is not used for a long period, remove batteries to prevent leakage damage.
• Do not attempt to recharge non-rechargeable batteries, as they can overheat and rupture. Follow battery manufacturer's directions.

AC Operation (AC Adapter not included)

Connect the AC adapter to a 120V AC outlet. Connect the adapter's small plug to the "DC IN 4.5V" jack on the player.

The optional AC adapter should be rated as follows:

• Input: 120V/60Hz AC.
• Output: 4.5V DC 500mA.

The adapter must have a female-type plug with a positive center.

• Ensure the adapter is UL listed. If using a "Universal"-type adapter, set the output selector to "DC 4.5V".
• If the AC adapter will not be used for an extended period, remove it from the wall outlet by pulling on the adapter housing (not the cord). Do not touch the AC adapter with wet hands.

Operating Instructions

Normal Playback

1. Connect headphones to the PHONES jack. Set VOLUME to a low level before playback and adjust to a comfortable level afterward.
2. Slide the CD Door OPEN switch to the right to unlock and open the CD Door.
3. Place the disc on the center spindle with the label side up. Press down gently near the center hole to seat the disc.
4. Close the door until it locks shut.
5. Press the PLAY/PAUSE ▶️▶️ button to begin playback on Track 1. The Joggable indicator flashes, and the playing time is shown.
6. Adjust VOLUME and DBBS (Bass Boost) controls as desired.
7. When all tracks are played, the player stops. The display shows total tracks and playing time. After about 1 minute, the power shuts off. To stop playback early, press the STOP button. Press STOP again to shut off power immediately.
8. Slide the CD Door OPEN switch to the right to open the door and remove the disc. Close the CD Door and return the disc to its case.

Auto-Resume Playback

This feature allows playback to resume at the beginning of the last track played, provided the disc remains in the player and power is not disconnected. Press STOP to stop playback (do not remove the disc). Press PLAY/PAUSE ▶️▶️ to resume. To cancel, open and close the CD door while power is on.

Pause Control

Press the PLAY/PAUSE ▶️▶️ button during playback to pause momentarily. The sound stops, and the track/time display flashes, but the disc continues to spin. Press PLAY/PAUSE ▶️▶️ again to cancel pause and resume playback.

Skip/Search Controls

To skip to another track, press SKIP ▶️▶️ or SKIP ◀️ repeatedly until the desired track number appears. Playback begins on that track.

To search within a track, press and hold SKIP ▶️▶️ or SKIP ◀️. The player moves at high speed. Release the buttons when the desired point is reached; normal playback resumes.

Playback Modes

Repeat Playback

To repeat a single track:

1. Press PLAY/PAUSE ▶️▶️ to begin playback.
2. Press SKIP ▶️▶️ or SKIP ◀️ to select the desired track.
3. Press the MODE button once until the "Repeat 1" indicator appears. The selected track repeats indefinitely.

To repeat the entire disc:

1. Press PLAY/PAUSE ▶️▶️ to begin playback.
2. Press the MODE button twice until the "Repeat All" indicator appears. The entire disc repeats indefinitely.

To cancel repeat playback:

• Press the STOP button, or
• Press the MODE button until no special mode indicators appear.

Intro Scan

This feature plays only the first 10 seconds of each track.

1. Press PLAY/PAUSE ▶️▶️ to begin playback.
2. Press the MODE button 3 times. The "INTRO" indicator flashes.
3. Press STOP to stop, then press PLAY/PAUSE ▶️▶️ again. The "INTRO" indicator stops flashing and remains on. The player plays the first 10 seconds of each track, then stops.

To cancel Intro Scan, press STOP or press MODE until no special indicators appear.

Random Playback

Plays all tracks on a disc in a random order.

1. Press PLAY/PAUSE ▶️▶️ to begin playback.
2. Press the MODE button 4 times until the "RAND" indicator flashes.
3. Press STOP to stop, then press PLAY/PAUSE ▶️▶️ again. The "RAND" indicator remains on. The player selects tracks randomly until all have been played once.

To cancel Random playback, press STOP or press MODE until no special indicators appear.

Programmed Playback

Program the player to play specific tracks in a desired order. Up to 24 tracks can be programmed.

IMPORTANT: Programming is only possible in Stop mode when total tracks and playing time are displayed. If the display is blank, press PLAY/PAUSE ▶️▶️ to start the disc, then press STOP.

1. In Stop mode, press PROG. The "PROG" indicator and "P - 01" appear. The track indicator flashes.
2. Press SKIP ▶️▶️ or SKIP ◀️ until the desired track number appears.
3. Press PROG again to enter the track. The track indicator resets to "00", and Program No. advances to "P - 02".
4. Repeat steps 2 and 3 for up to 24 tracks.
5. Press PLAY/PAUSE ▶️▶️ to begin programmed playback. The "PROG" indicator remains on. The player plays tracks in the programmed order.

To cancel programmed playback, press and hold PROG in Stop mode until the "PROG" indicator disappears.

"Joggable" Electronic Anti-Skip Protection

This player features a 45-second Electronic Anti-Skip Memory and an Anti-Rolling Mechanism to minimize skipping. The joggable anti-skip circuitry offers faster recovery times, allowing skip-free music during activities like jogging. When playback begins, the player stores 45 seconds of music in memory. If subjected to shocks or bumps of less than 45 seconds, they will not be noticed. Longer shocks may deplete the memory, causing skips.

The Joggable Anti-Skip indicator flashes rapidly when playback starts and flashes slowly when the 45-second memory is full. It flashes rapidly again if the player is bumped or shaken. The memory refills and the indicator slows down when bumps stop.

The Joggable Anti Skip System uses extra battery power. If not jogging, press the ASP button to turn the anti-skip circuitry Off. The "joggable" indicator will disappear, saving battery life.

Note: The joggable anti-skip system turns On automatically each time you play a disc.

Connection to an External Audio System

Connect this CD player to a home stereo system, receiver, amplifier, or recorder using the LINE OUT jack. Connect it to the Left/Right Auxiliary Inputs, Line Inputs, or Record Inputs of the external device. The connection cable is not included.

Set the DBBS (Bass Boost) switch on this CD player to the "OFF" position. Follow the external source connection instructions for your equipment.

A diagram illustrates connecting the LINE OUT jack to a stereo system or cassette recorder.

Care and Maintenance

Cleaning the Cabinet

Wipe with a soft cloth. For heavy dirt, dampen the cloth with a weak solution of neutral detergent and water, then wipe clean.

Cleaning the Lens

A dirty lens can cause skipping or prevent the CD from working. Open the disc cover and clean the lens as follows:

• Dust or Dry Particles: Using a camera lens brush/blower, blow on the lens several times. Lightly wipe with the brush to remove dust. Blow on the lens again.
• Fingerprints: Use a cotton swab, starting from the middle and working outwards. Use very light pressure to avoid forcing the lens out of alignment.

Cleaning the Disc

When a disc becomes dirty, clean it with a cleaning cloth, wiping from the center outwards.

NOTE: Do not use solvents such as benzine, thinner, commercially available cleaners, or anti-static spray intended for analog discs.

Troubleshooting Guide

Check the following chart if you experience a problem:

Service

For additional set-up or operating assistance, please call: 1-800-898-9020

For customer service, please write to:

Emerson Radio Corp.
Consumer Affairs Dept.
1901 Diplomat Drive,
Farmers Branch, TX 75234.

Limited Warranty

What does this warranty cover? Any manufacturing defects in original material, including original parts and workmanship, under normal use and conditions.

For how long? For a period of ninety (90) days from the date of original purchase in the U.S.

What will we do? If service is needed under this Warranty, with dated proof of purchase, Emerson will provide repair service at no charge for labor and parts at an authorized Depot Repair Facility, or replace the product at their discretion.

How to make a warranty claim: Obtain the name and mailing location of a Depot Repair Facility by dialing 1-800-695-0098. Pack the unit in a well-padded box, enclose a check or money order for $9.00 (for return shipping and handling) payable to the Depot Repair Facility, and include a copy of your proof of purchase. Ship the unit prepaid via UPS or parcel post (insured).

What your warranty does not cover:

• Damage from negligence, misuse, abuse, accident, or failure to follow operating instructions.
• Use in a commercial application or rentals.
• Changes or repairs by anyone other than an authorized Depot Repair Facility.
• Damage from improper connection to equipment of other manufacturers.
• Units with defaced, modified, or removed serial numbers.
• Damage to equipment not properly connected to the product.
• Costs incurred in shipping the unit to and from an authorized Depot Repair Facility.
• Ordinary adjustments outlined in the owner's manual.
• Signal reception problems caused by external antenna or cable systems.
• Products purchased, used, serviced, or damaged outside of the United States.
• Damage to compact discs or cassettes.

Other limitations: This WARRANTY IS NON-TRANSFERABLE and applies only to the original purchaser. It is valid only in the United States of America. Implied warranties, including MERCHANTABILITY, are limited to the duration of the expressed warranty (90 days). Emerson makes no warranty as to the fitness of the product for any particular purpose or use.

Emerson's liability is limited to repair or replacement, not exceeding the purchase price. Emerson is not liable for any direct, indirect, incidental, special, or consequential damage arising from the use of the product.

How state law applies: This warranty grants specific legal rights, which may vary by state. Some states do not allow limitations on implied warranties or incidental/consequential damages.