Owner’s Manual
owner.ford.com
ford.ca
March 2018 Third Printing Owner's Manual
Escape Litho in U.S.A.
DID_3303282_18c_Escape_OM_EN_020918.indd 1
JJ5J 19A321 AB
2018 ESCAPE Owner's Manual
2018 ESCAPE Owner's Manual
2/15/2018 10:28:36 AM
The information contained in this publication was correct at the time of going to print. In the interest of continuous development, we reserve the right to change specifications, design or equipment at any time without notice or obligation. No part of this publication may be reproduced, transmitted, stored in a retrieval system or translated into any language in any form by any means without our written permission. Errors and omissions excepted.
© Ford Motor Company 2018
All rights reserved.
Part Number: JJ5J 19A321 AB 201706 20180208192737
Table of Contents
Introduction
About This Manual ..........................................7 Symbols Glossary ............................................7 Data Recording .................................................9 California Proposition 65 .............................11 Perchlorate ........................................................11 Ford Credit ........................................................12 Replacement Parts Recommendation
............................................................................12 Special Notices ...............................................12 Mobile Communications Equipment
...........................................................................1 4 Export Unique Options ................................14
Environment
Protecting the Environment .......................15
At a Glance
Instrument Panel Overview .......................16
Child Safety
General Information ......................................18 Installing Child Restraints ...........................19 Booster Seats .................................................25 Child Restraint Positioning .........................27 Child Safety Locks ........................................28
Seatbelts
Principle of Operation .................................30 Fastening the Seatbelts ...............................31 Seatbelt Height Adjustment .....................33 Seatbelt Warning Lamp and Indicator
Chime ............................................................33 Seatbelt Reminder .......................................34 Child Restraint and Seatbelt
Maintenance ...............................................36 Seatbelt Extension .......................................36
Personal Safety SystemTM
Personal Safety SystemTM .........................37
Supplementary Restraints System
Principle of Operation .................................38 Driver and Passenger Airbags ..................39 Front Passenger Sensing System ...........40 Side Airbags ....................................................42 Driver Knee Airbag ........................................43 Safety CanopyTM ...........................................43 Crash Sensors and Airbag Indicator .......45 Airbag Disposal .............................................46
Keys and Remote Controls
General Information on Radio Frequencies .................................................47
Remote Control ..............................................47 Replacing a Lost Key or Remote Control
............................................................................51
MyKeyTM
Principle of Operation ..................................52 Creating a MyKey ...........................................53 Clearing All MyKeys ......................................53 Checking MyKey System Status ..............55 Using MyKey With Remote Start
Systems ........................................................56 MyKey Troubleshooting ..............................56
Doors and Locks
Locking and Unlocking ................................58 Keyless Entry ....................................................61
Liftgate
Manual Liftgate .............................................64 Power Liftgate ................................................65
Security
Passive Anti-Theft System .......................68 Anti-Theft Alarm ...........................................69
1
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Table of Contents
Steering Wheel
Adjusting the Steering Wheel ...................70 Audio Control ..................................................70 Voice Control ....................................................71 Cruise Control ..................................................71 Information Display Control ......................72 Heated Steering Wheel ...............................72
Wipers and Washers
Windshield Wipers ........................................73 Autowipers .......................................................73 Windshield Washers .....................................74 Rear Window Wiper and Washers ..........74
Lighting
General Information .....................................76 Lighting Control .............................................76 Autolamps ........................................................77 Instrument Lighting Dimmer .....................77 Headlamp Exit Delay ...................................78 Daytime Running Lamps ............................78 Automatic High Beam Control .................78 Front Fog Lamps ...........................................79 Direction Indicators ......................................80 Interior Lamps ................................................80 Ambient Lighting ..........................................80
Windows and Mirrors
Power Windows ..............................................81 Exterior Mirrors ...............................................82 Interior Mirror ..................................................84 Sun Visors ........................................................84 Moonroof .........................................................84
Instrument Cluster
Gauges ..............................................................86 Warning Lamps and Indicators ................87 Audible Warnings and Indicators ...........90
Information Displays
General Information ......................................91 Trip Computer ................................................94 Information Messages ................................95
Climate Control
Manual Climate Control ............................107 Automatic Climate Control .....................108 Hints on Controlling the Interior Climate
..........................................................................110 Heated Windows and Mirrors ..................113 Cabin Air Filter ................................................113 Remote Start ..................................................114
Seats
Sitting in the Correct Position ..................115 Head Restraints .............................................115 Manual Seats ..................................................117 Power Seats ...................................................118 Memory Function ........................................120 Rear Seats .......................................................121 Heated Seats .................................................122
Universal Garage Door Opener
Universal Garage Door Opener ...............123
Auxiliary Power Points
Auxiliary Power Points ................................127
Storage Compartments
Center Console .............................................129 Overhead Console .......................................129 Rear Seat Armrest .......................................129
Starting and Stopping the Engine
General Information ...................................130 Ignition Switch ..............................................130
2
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Table of Contents
Keyless Starting ...........................................130 Starting a Gasoline Engine ........................131 Engine Block Heater ...................................134
Unique Driving Characteristics
Auto-Start-Stop ..........................................136
Fuel and Refueling
Safety Precautions .....................................138 Fuel Quality ...................................................138 Fuel Quality ....................................................139 Fuel Filler Funnel Location ......................140 Running Out of Fuel ...................................140 Refueling .........................................................142 Fuel Consumption ......................................144
Engine Emission Control
Emission Law ................................................146 Catalytic Converter .....................................147
Transmission
Automatic Transmission ..........................150
Four-Wheel Drive
Principle of Operation ................................154 Using Four-Wheel Drive ............................154
Brakes
General Information ...................................159 Hints on Driving With Anti-Lock Brakes
.........................................................................159 Parking Brake ................................................160 Electric Parking Brake ................................160 Hill Start Assist .............................................162
Traction Control
Principle of Operation ...............................164 Using Traction Control ..............................164
Stability Control
Principle of Operation ................................165 Using Stability Control ..............................166
Parking Aids
Principle of Operation ................................167 Rear Parking Aid ...........................................167 Front Parking Aid .........................................168 Side Sensing System .................................169 Active Park Assist ..........................................171 Rear View Camera .......................................177
Cruise Control
Principle of Operation ...............................180 Using Cruise Control ..................................180 Using Adaptive Cruise Control ................181
Driving Aids
Driver Alert ......................................................187 Lane Keeping System ................................188 Blind Spot Information System .............193 Cross Traffic Alert ........................................194 Steering ...........................................................197 Collision Warning System .........................197
Load Carrying
Rear Under Floor Storage .......................200 Luggage Covers ..........................................200 Roof Racks and Load Carriers ................201 Load Limit ......................................................202
Towing
Towing a Trailer ...........................................207 Trailer Sway Control ..................................208 Recommended Towing Weights ..........208 Essential Towing Checks ..........................210 Towing the Vehicle on Four Wheels ......212
3
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Table of Contents
Driving Hints
Breaking-In .....................................................213 Economical Driving .....................................213 Driving Through Water ...............................214 Floor Mats .......................................................214
Roadside Emergencies
Roadside Assistance ..................................216 Hazard Flashers ............................................217 Fuel Shutoff ...................................................217 Jump Starting the Vehicle ........................218 Post-Crash Alert System .........................220 Transporting the Vehicle ..........................220
Customer Assistance
Getting the Services You Need ..............222 In California (U.S. Only) ............................223 The Better Business Bureau (BBB) Auto
Line Program (U.S. Only) .....................224 Utilizing the Mediation/Arbitration
Program (Canada Only) ......................225 Getting Assistance Outside the U.S. and
Canada .......................................................225 Ordering Additional Owner's Literature
.........................................................................227 Reporting Safety Defects (U.S. Only)
.........................................................................227 Reporting Safety Defects (Canada Only)
.........................................................................227
Fuses
Fuse Specification Chart .........................229 Changing a Fuse .........................................239
Maintenance
General Information ...................................241 Opening and Closing the Hood ..............241 Under Hood Overview - 1.5L EcoBoostTM
........................................................................242 Under Hood Overview - 2.0L EcoBoostTM
........................................................................243
Under Hood Overview - 2.5L ..................244 Engine Oil Dipstick - 1.5L EcoBoostTM
........................................................................246 Engine Oil Dipstick - 2.0L EcoBoostTM/
2.5L ..............................................................246 Engine Oil Check .........................................246 Oil Change Indicator Reset ......................247 Engine Coolant Check ..............................248 Automatic Transmission Fluid Check
........................................................................252 Brake Fluid Check .......................................252 Power Steering Fluid Check ....................253 Washer Fluid Check ...................................253 Fuel Filter .......................................................253 Changing the 12V Battery ........................253 Checking the Wiper Blades .....................255 Changing the Wiper Blades ....................256 Adjusting the Headlamps .......................256 Changing a Bulb ..........................................258 Bulb Specification Chart ..........................262 Changing the Engine Air Filter ...............264
Vehicle Care
General Information ..................................266 Cleaning Products ......................................266 Cleaning the Exterior .................................266 Waxing ............................................................268 Cleaning the Engine ..................................268 Cleaning the Windows and Wiper Blades
........................................................................268 Cleaning the Interior ..................................269 Cleaning the Instrument Panel and
Instrument Cluster Lens ......................269 Cleaning Leather Seats ............................270 Repairing Minor Paint Damage ...............271 Cleaning the Wheels ...................................271 Vehicle Storage .............................................271
Wheels and Tires
General Information ...................................274
4
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Table of Contents
Tire Care .........................................................276 Using Snow Chains ....................................289 Tire Pressure Monitoring System .........290 Changing a Road Wheel ..........................294 Technical Specifications .........................298
Capacities and Specifications
Engine Specifications - 1.5L EcoBoostTM .......................................................................300
Engine Specifications - 2.0L EcoBoostTM .......................................................................300
Engine Specifications - 2.5L ....................301 Motorcraft Parts - 1.5L EcoBoostTM ......302 Motorcraft Parts - 2.0L EcoBoostTM ....303 Motorcraft Parts - 2.5L .............................304 Vehicle Identification Number ..............305 Vehicle Certification Label .....................306 Transmission Code Designation ...........306 Capacities and Specifications - 1.5L
EcoBoostTM ...............................................307 Capacities and Specifications - 2.0L
EcoBoostTM .................................................311 Capacities and Specifications - 2.5L
.........................................................................316
Audio System
General Information ...................................321 Audio Unit - Vehicles With: AM/FM/CD/
SYNC ...........................................................322 Audio Unit - Vehicles With: AM/FM/CD/
SYNC/Touchscreen Display ...............324 Audio Unit - Vehicles With: Sony Audio
System ........................................................326 Audio Unit - Vehicles With: AM/FM/CD
.........................................................................327 Digital Radio ..................................................332 Satellite Radio .............................................334 USB Port .........................................................337
SYNCTM
General Information ..................................338
Using Voice Recognition ..........................340 Using SYNCTM With Your Phone ...........342 SYNCTM Applications and Services ......354 Using SYNCTM With Your Media Player
........................................................................359 SYNCTM Troubleshooting ........................368
SYNCTM 3
General Information ..................................376 Home Screen ...............................................388 Using Voice Recognition ..........................390 Entertainment .............................................396 Phone ..............................................................407 Navigation ......................................................412 Apps ................................................................420 Settings ..........................................................423 SYNCTM 3 Troubleshooting .....................437
Accessories
Accessories ....................................................451
Ford Protect
Ford Protect ..................................................453
Scheduled Maintenance
General Maintenance Information ......455 Normal Scheduled Maintenance .........458 Special Operating Conditions Scheduled
Maintenance .............................................461 Scheduled Maintenance Record ..........463
Appendices
Electromagnetic Compatibility .............474 End User License Agreement .................476
5
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
6
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Introduction
ABOUT THIS MANUAL
Thank you for choosing Ford. We recommend that you take some time to get to know your vehicle by reading this manual. The more that you know about your vehicle, the greater the safety and pleasure you will get from driving it.
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Note: This manual describes product features and options available throughout the range of available models, sometimes even before they are generally available. It may describe options not fitted to the vehicle you have purchased.
Note: Some of the illustrations in this manual may show features as used in different models, so may appear different to you on your vehicle.
Note: Always use and operate your vehicle in line with all applicable laws and regulations.
Note: Pass on this manual when selling your vehicle. It is an integral part of your vehicle.
This manual may qualify the location of a component as left-hand side or right-hand side. The side is determined when facing forward in the seat.
E154903
A Right-hand side. B Left-hand side.
SYMBOLS GLOSSARY
These are some of the symbols you may see on your vehicle.
Air conditioning system
E162384 E231157
Air conditioning system lubricant type
Anti-lock braking system
Avoid smoking, flames or sparks
Battery
Battery acid
Brake fluid - non petroleum based
7
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Introduction
Brake system
E270480
Cabin air filter
Check fuel cap
Fasten seatbelt
E71880 E231160
Flammable Front airbag
E67017
Front fog lamps
Child safety door lock or unlock
Fuel pump reset
Child seat lower anchor
Fuse compartment
Child seat tether anchor
Hazard flashers
E71340
Cruise control Do not open when hot
Heated rear window Windshield defrosting system
Engine air filter Engine coolant
Interior luggage compartment release
Jack
Engine coolant temperature Engine oil Explosive gas Fan warning
E161353
Keep out of reach of children Lighting control
Low tire pressure warning
Maintain correct fluid level
8
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Introduction
Note operating instructions
Side airbag
E270945
Horn control Panic alarm
E139213
Parking aid Parking brake
Power steering fluid
Power windows front/rear
Shield the eyes
E167012
Stability control
E138639
Hill descent control
E163957
Trail control
E271982
Windshield wiping system
E270969
Windshield wash and wipe
Power window lockout
Requires registered technician
E231159
Safety alert
See Owner's Manual
See Service Manual
E231158
Service engine soon
E270849 E270850
Passenger airbag activated Passenger airbag deactivated
DATA RECORDING
Service Data Recording
Service data recorders in your vehicle are capable of collecting and storing diagnostic information about your vehicle. This potentially includes information about the performance or status of various systems and modules in the vehicle, such as engine, throttle, steering or brake systems. In order to properly diagnose and service your vehicle, Ford Motor Company (Ford of Canada in Canada), and service and repair facilities may access or share among them vehicle diagnostic information received through a direct connection to your vehicle when diagnosing or servicing your vehicle. Additionally, Ford Motor Company (Ford of Canada, in Canada) may, where permitted by law, use vehicle diagnostic information for vehicle improvement or with other information we may have about you, (for example, your contact
9
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Introduction
information), to offer you products or services that may interest you. Data may be provided to our service providers such as part suppliers that may help diagnose malfunctions, and who are similarly obligated to protect data. We retain this data only as long as necessary to perform these functions or to comply with law. We may provide information where required in response to official requests to law enforcement or other government authorities or third parties acting with lawful authority or court order, and such information may be used in legal proceedings. For U.S. only (if equipped), if you choose to use connected apps and services, such as SYNC Vehicle Health Report or MyFord Mobile App, you consent that certain diagnostic information may also be accessed electronically by Ford Motor Company and Ford authorized service facilities, and that the diagnostic information may be used to provide services to you, personalizing your experience, troubleshoot, and to improve products and services and offer you products and services that may interest you, where permitted by law. For Canada only, for more information, please review the Ford of Canada privacy policy at www.ford.ca, including our U.S. data storage and use of service providers in other jurisdictions who may be subject to legal requirements in Canada, the United States and other countries applicable to them, for example, lawful requirements to disclose personal information to governmental authorities in those countries. See SYNCTM (page 338).
Event Data Recording
This vehicle is equipped with an event data recorder. The main purpose of an event data recorder is to record, in certain crash or near crash-like situations, such as an airbag deployment or hitting a road obstacle;
this data will assist in understanding how a vehicle's systems performed. The event data recorder is designed to record data related to vehicle dynamics and safety systems for a short period of time, typically 30 seconds or less.
The event data recorder in this vehicle is designed to record such data as:
· How various systems in your vehicle were operating;
· Whether or not the driver and passenger safety belts were buckled/fastened;
· How far (if at all) the driver was depressing the accelerator and/or the brake pedal; and
· How fast the vehicle was traveling; and
· Where the driver was positioning the steering wheel.
This data can help provide a better understanding of the circumstances in which crashes and injuries occur.
Note: Event data recorder data is recorded by your vehicle only if a non-trivial crash situation occurs; no data is recorded by the event data recorder under normal driving conditions and no personal data or information (e.g., name, gender, age, and crash location) is recorded (see limitations regarding 911 Assist and Traffic, directions and Information privacy below). However, parties, such as law enforcement, could combine the event data recorder data with the type of personally identifying data routinely acquired during a crash investigation.
To read data recorded by an event data recorder, special equipment is required, and access to the vehicle or the event data recorder is needed. In addition to the vehicle manufacturer, other parties, such as law enforcement, that have such special equipment, can read
10
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Introduction
the information if they have access to the vehicle or the event data recorder. Ford Motor Company and Ford of Canada do not access event data recorder information without obtaining consent, unless pursuant to court order or where required by law enforcement, other government authorities or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada.
Note: Including to the extent that any law pertaining to Event Data Recorders applies to SYNC or its features, please note the following: Once 911 Assist (if equipped) is enabled (set ON), 911 Assist may, through any paired and connected cell phone, disclose to emergency services that the vehicle has been in a crash involving the deployment of an airbag or, in certain vehicles, the activation of the fuel pump shut-off. Certain versions or updates to 911 Assist may also be capable of being used to electronically or verbally provide to 911 operators the vehicle location (such as latitude and longitude), and/or other details about the vehicle or crash or personal information about the occupants to assist 911 operators to provide the most appropriate emergency services. If you do not want to disclose this information, do not activate the 911 Assist feature. See SYNCTM (page 338).
Additionally, when you connect to Traffic, Directions and Information (if equipped, U.S. only), the service uses GPS technology and advanced vehicle sensors to collect the vehicle's current location, travel direction, and speed ("vehicle travel information"), only to help provide you with the directions, traffic reports, or business searches that you request. If you do not want
Ford or its vendors to receive this information, do not activate the service. For more information, see Traffic, Directions and Information, Terms and Conditions. See SYNCTM (page 338).
CALIFORNIA PROPOSITION 65
WARNINGS Some constituents of engine exhaust, certain vehicle components, certain fluids contained in vehicles and certain products of component wear contain or emit chemicals known to the State of California to cause cancer and birth defects or other reproductive harm.
Battery posts, terminals and related accessories contain lead and lead compounds, chemicals known to the State of California to cause cancer and reproductive harm. Batteries also contain other chemicals known to the State of California to cause cancer. Wash your hands after handling.
PERCHLORATE
Certain components in your vehicle such as airbag modules, seatbelt pretensioners and remote control batteries may contain perchlorate material. Special handling may apply for service or vehicle end of life disposal.
11
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Introduction
For more information visit:
Web Address
www.dtsc.ca.gov/hazardouswaste/perchlorate
FORD CREDIT
US Only
Ford Credit offers a full range of financing and lease plans to help you acquire your vehicle. If you have financed or leased your vehicle through Ford Credit, thank you for your business.
We offer a number of convenient ways for you to contact us, and to manage your account.
Call 1-800-727-7000.
For more information about Ford Credit and access to Account Manager, go to www.ford.com/finance.
REPLACEMENT PARTS RECOMMENDATION
We have built your vehicle to the highest standards using quality parts. We recommend that you demand the use of genuine Ford and Motorcraft parts whenever your vehicle requires scheduled maintenance or repair. You can clearly identify genuine Ford and Motorcraft parts by looking for the Ford, FoMoCo or Motorcraft branding on the parts or their packaging.
Scheduled Maintenance and Mechanical Repairs
One of the best ways for you to make sure that your vehicle provides years of service is to have it maintained in line with our recommendations using parts that conform to the specifications detailed in this Owner's Manual. Genuine Ford and Motorcraft parts meet or exceed these specifications.
Collision Repairs
We hope that you never experience a collision, but accidents do happen. Genuine Ford replacement collision parts meet our stringent requirements for fit, finish, structural integrity, corrosion protection and dent resistance. During vehicle development we validate that these parts deliver the intended level of protection as a whole system. A great way to know for sure you are getting this level of protection is to use genuine Ford replacement collision parts.
Warranty on Replacement Parts
Genuine Ford and Motorcraft replacement parts are the only replacement parts that benefit from a Ford Warranty. The Ford Warranty may not cover damage caused to your vehicle as a result of failed non-Ford parts. For additional information, refer to the terms and conditions of the Ford Warranty.
SPECIAL NOTICES
New Vehicle Limited Warranty
For a detailed description of what is covered and what is not covered by your vehicle's New Vehicle Limited Warranty, see the Warranty Manual that is provided to you along with your Owner's Manual.
12
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Introduction
Special Instructions
For your added safety, your vehicle is fitted with sophisticated electronic controls.
WARNINGS You risk death or serious injury to yourself and others if you do not follow the instruction highlighted by the warning symbol. Failure to follow the specific warnings and instructions could result in personal injury.
NEVER use a rearward facing child restraint on a seat protected by an ACTIVE AIRBAG in front of it, DEATH or SERIOUS INJURY to the CHILD can occur.
On Board Diagnostics Data Link Connector
WARNING
Do not connect wireless plug-in devices to the data link connector. Unauthorized third parties could gain access to vehicle data and impair the performance of safety related systems. Only allow repair facilities that follow our service and repair instructions to connect their equipment to the data link connector.
Your vehicle has an OBD Data Link Connector (DLC) that is used in conjunction with a diagnostic scan tool for vehicle diagnostics, repairs and reprogramming services. Installing an aftermarket device that uses the DLC during normal driving for purposes such as remote insurance company monitoring, transmission of vehicle data to other devices or entities, or altering the performance of the vehicle, may cause
interference with or even damage to vehicle systems. We do not recommend or endorse the use of aftermarket plug-in devices unless approved by Ford. The vehicle Warranty will not cover damage caused by an aftermarket plug-in device.
Notice to Owners of Pickup Trucks and Utility Type Vehicles
WARNING
Utility vehicles have a significantly higher rollover rate than other types of vehicles.
Before you drive your vehicle, please read this Owner's Guide carefully. Your vehicle is not a passenger car. As with other vehicles of this type, failure to operate this vehicle correctly may result in loss of vehicle control, vehicle rollover, personal injury or death.
Using Your Vehicle With a Snowplow
Do not use this vehicle for snowplowing.
Your vehicle does not have a snowplowing package.
Using Your Vehicle as an Ambulance
Do not use this vehicle as an ambulance.
Your vehicle does not have the Ford Ambulance Preparation Package.
13
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Introduction
MOBILE COMMUNICATIONS EQUIPMENT
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Using mobile communications equipment is becoming increasingly important in the conduct of business and personal affairs. However, you must not compromise your own or others' safety when using such equipment. Mobile communications can enhance personal safety and security when appropriately used, particularly in emergency situations. Safety must be paramount when using mobile communications equipment to avoid negating these benefits. Mobile communication equipment includes, but is not limited to, cellular phones, pagers, portable email devices, text messaging devices and portable two-way radios.
EXPORT UNIQUE OPTIONS
For your particular global region, your vehicle may be equipped with features and options that are different from the features and options that are described in this Owner's Manual. A market unique supplement may be supplied that complements this book. By referring to the market unique supplement, if provided, you can properly identify those features,
recommendations and specifications that are unique to your vehicle. This Owner's Manual is written primarily for the U.S. and Canadian Markets. Features or equipment listed as standard may be different on units built for export. Refer to this Owner's Manual for all other required information and warnings.
14
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Environment
PROTECTING THE ENVIRONMENT
You should play your part in protecting the environment. Correct vehicle usage and the authorized disposal of waste, cleaning and lubrication materials are significant steps toward this aim. For details about Ford Motor Company's sustainability progress and initiatives visit:
Web Address www.sustainability.ford.com
15
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
At a Glance
INSTRUMENT PANEL OVERVIEW Instrument Panel Overview
E273080
A Air vents.
B Direction indicators. See Direction Indicators (page 80).
C Instrument cluster. See Gauges (page 86).
D Wiper lever. See Windshield Wipers (page 73).
E CD slot. See Audio Unit (page 322).
F Information and entertainment display.
G Audio unit. See Audio Unit (page 322).
H Hazard flasher button. See Hazard Flashers (page 217).
I Active park assist. See Active Park Assist (page 171).
J Parking aid button. See Principle of Operation (page 167).
K Heated steering wheel button. See Heated Steering Wheel (page 72).
L Auto-Start-Stop button. See Auto-Start-Stop (page 136).
M Climate controls. See Automatic Climate Control (page 108).
16
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
At a Glance
N Keyless start button. See Keyless Starting (page 130).
O Audio control. See Audio Control (page 70). Voice control. See Voice Control (page 71).
P Steering wheel adjustment. See Adjusting the Steering Wheel (page 70).
Q Horn. R Cruise control buttons. See
Using Cruise Control (page 180). Adaptive cruise control (ACC) buttons. See Using Adaptive Cruise Control (page 181). S Information display controls. See Information Displays (page 91). T Lighting control. See Lighting Control (page 76). Front fog lamps. See Front Fog Lamps (page 79). Instrument lighting dimmer. See Instrument Lighting Dimmer (page 77). Liftgate. See Power Liftgate (page 65).
17
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
GENERAL INFORMATION
See the following sections for directions on how to properly use safety restraints for children.
WARNINGS
Always make sure your child is secured properly in a device that is appropriate for their height, age and weight. Child safety restraints must be bought separately from your vehicle. Failure to follow these instructions and guidelines may result in an increased risk of serious injury or death to your child.
All children are shaped differently. The National Highway Traffic Safety Administration and other safety organizations, base their recommendations for child restraints on probable child height, age and weight thresholds, or on the minimum requirements of the law. We recommend that you check with a NHTSA Certified Child Passenger Safety
WARNINGS
Technician (CPST) to make sure that you properly install the child restraint in your vehicle and that you consult your pediatrician to make sure you have a child restraint appropriate for your child. To locate a child restraint fitting station and CPST, contact NHTSA toll free at 1-888-327-4236 or go to www.nhtsa.dot.gov. In Canada, contact Transport Canada toll free at 1-800-333-0371 or go to www.tc.gc.ca to find a Child Car Seat Clinic in your area. Failure to properly restrain children in child restraints made especially for their height, age and weight, may result in an increased risk of serious injury or death to your child.
On hot days, the temperature inside the vehicle can rise very quickly. Exposure of people or animals to these high temperatures for even a short time can cause death or serious heat related injuries, including brain damage. Small children are particularly at risk.
18
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
Recommendations for Safety Restraints for Children
Child
Child size, height, weight, or age
Infants or toddlers
Children weighing 40 lb (18 kg) or less (generally age four or younger).
Small children
Children who have outgrown or no longer properly fit in a child safety seat (generally children who are less than 4 ft. 9 in. (1.45 m) tall, are greater than age four and less than age 12, and between 40 lb (18 kg) and 80 lb (36 kg) and upward to 100 lb (45 kg) if recommended by your
child restraint manufacturer).
Larger children
Children who have outgrown or no longer properly fit in a belt-positioning booster seat (generally children who are at least
4 ft. 9 in. (1.45 m) tall or greater than 80 lb (36 kg) or 100 lb (45 kg) if recommended by child restraint manufacturer).
Recommended restraint type
Use a child safety seat (sometimes called an infant carrier, convertible seat, or toddler seat).
Use a belt-positioning booster seat.
Use a vehicle safety belt having the lap belt snug and low across the hips, shoulder belt centered across the shoulder and
chest, and seatback upright.
· You are required by law to properly use safety seats for infants and toddlers in the United States and Canada.
· Many states and provinces require that small children use approved booster seats until they reach age eight, a height of 4 feet 9 inches (1.45 meters) tall, or 80 lb (36 kg). Check your local and state or provincial laws for specific requirements about the safety of children in your vehicle.
· When possible, always properly restrain children 12 years of age and under in a rear seating position of your vehicle. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in a front seating position. See Front Passenger Sensing System (page 40).
INSTALLING CHILD RESTRAINTS Child Restraints
E142594
19
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
Use a child restraint (sometimes called an infant carrier, convertible seat, or toddler seat) for infants, toddlers, or children weighing 40 lb (18 kg) or less (generally age four or younger).
Using Lap and Shoulder Belts
WARNINGS
Do not place a rearward facing child restraint in front of an active airbag. Failure to follow this instruction could result in personal injury or death.
Properly secure children 12 years old and under in a rear seating position whenever possible. If you are unable to properly secure all children in a rear seating position, properly secure the largest child on the front seat. If you must use a forward facing child restraint on the front seat, move the seat as far back as possible. Failure to follow these instructions could result in personal injury or death.
Depending on where you secure a child restraint, and depending on the child restraint design, you may block access to certain seatbelt buckle assemblies and LATCH lower anchors, rendering those features potentially unusable. To avoid risk of injury, make sure occupants only use seating positions where they are able to be properly restrained.
When installing a child restraint with combination lap and shoulder belts:
· Use the correct seatbelt buckle for that seating position.
· Insert the belt tongue into the proper buckle until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle.
· Keep the buckle release button pointing up and away from the child restraint , with the tongue between the child restraint and the release button, to prevent accidental unbuckling.
· Place the vehicle seat upon which the child restraint will be installed in the upright position.
· Put the seatbelt in the automatic locking mode. See Step 5. This vehicle does not require the use of a locking clip.
Perform the following steps when installing the child restraint with combination lap and shoulder belts: Note: Although the child restraint illustrated is a forward facing child restraint, the steps are the same for installing a rear facing child restraint.
E142528
1. Position the child restraint in a seat with a combination lap and shoulder belt.
20
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
E142529
2. Pull down on the shoulder belt and then grasp the shoulder belt and lap belt together.
E142531
4. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) for that seating position until you hear a snap and feel the latch engage. Make sure the tongue is latched securely by pulling on it.
E142530
3. While holding the shoulder and lap belt portions together, route the tongue through the child restraint according to the child restraint manufacturer's instructions. Be sure the belt webbing is not twisted.
E142875
5. To put the retractor in the automatic locking mode, grasp the shoulder portion of the belt and pull downward until you pull all of the belt out.
Note: The automatic locking mode is available on the front passenger and rear seats.
6. Allow the belt to retract to remove slack. The belt clicks as it retracts to indicate it is in the automatic locking mode.
21
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
7. Try to pull the belt out of the retractor to make sure the retractor is in the automatic locking mode (you should not be able to pull more belt out). If the retractor is not locked, unbuckle the belt and repeat Steps 5 and 6.
E142533
8. Remove remaining slack from the belt. Force the seat down with extra weight, for example, by pressing down or kneeling on the child restraint while pulling up on the shoulder belt in order to force slack from the belt. This is necessary to remove the remaining slack that exists once you add the extra weight of the child to the child restraint. It also helps to achieve the proper snugness of the child restraint to your vehicle. Sometimes, a slight lean toward the buckle will additionally help to remove remaining slack from the belt.
9. Attach the tether strap (if the child restraint is equipped).
E142534
10. Before placing the child in the seat, forcibly move the seat forward and back to make sure the seat is securely held in place. To check this, grab the seat at the belt path and attempt to move it side to side and forward and back. There should be no more than 1 in (2.5 cm) of movement for proper installation.
We recommend checking with a NHTSA Certified Child Passenger Safety Technician to make certain the child restraint is properly installed. In Canada, check with Transport Canada for referral to a Child Car Seat Clinic.
Using Lower Anchors and Tethers for CHildren (LATCH)
WARNINGS
Do not attach two child safety restraints to the same anchor. In a crash, one anchor may not be strong enough to hold two child safety restraint attachments and may break, causing serious injury or death.
22
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
WARNINGS Depending on where you secure a child restraint, and depending on the child restraint design, you may block access to certain seatbelt buckle assemblies and LATCH lower anchors, rendering those features potentially unusable. To avoid risk of injury, make sure occupants only use seating positions where they are able to be properly restrained.
The LATCH system is composed of three vehicle anchor points: two lower anchors where the seat backrest and seat cushion meet (called the seat bight) and one top tether anchor behind that seating position. LATCH compatible child restraints have two rigid or webbing mounted attachments that connect to the two lower anchors at the LATCH equipped seating positions in your vehicle. This type of attachment method eliminates the need to use seatbelts to attach the child restraint. However, you can still use the seatbelt to attach the child restraint. For forward-facing child restraints, you must attach the top tether strap to the proper top tether anchor, if a top tether strap has been provided with your child restraint.
E142535
Your vehicle has LATCH lower anchors for child restraint installation at the seating positions marked with the child restraint symbol.
E144054
The LATCH anchors are at the rear section of the rear seat between the cushion and seat backrest below the symbols as shown. Follow the child restraint manufacturer's instructions to properly install a child restraint with LATCH attachments. Follow the instructions on attaching child restraints with tether straps. Attach LATCH lower attachments of the child restraint only to the anchors shown.
Use of Inboard Lower Anchors from the Outboard Seating Positions (Center Seating Use)
WARNING The standardized spacing for LATCH lower anchors is 11 in (280 mm) center to center. Do not use LATCH lower anchors for the center seating position unless the child restraint manufacturer's instructions permit and specify using anchors spaced at least as far apart as those in this vehicle.
23
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
The lower anchors at the center of the second row rear seat are spaced 18 in (46 cm) apart. A child restraint with rigid LATCH attachments cannot be installed at the center seating position. LATCH compatible child restraints (with attachments on belt webbing) can only be used at this seating position provided that the child restraint manufacturer's instructions permit use with the anchor spacing stated. Do not attach a child restraint to any lower anchor if an adjacent child restraint is attached to that anchor.
Each time you use the child restraint, check that the seat is properly attached to the lower anchors and tether anchor, if applicable. Tug the child restraint from side to side and forward and back where it is secured to your vehicle. The seat should move less than 1 in (2.5 cm) when you do this for a proper installation.
If the child restraint is not anchored properly, the risk of a child being injured in a crash greatly increases.
Combining Seatbelt and LATCH Lower Anchors for Attaching Child Restraints
When used in combination, either the seatbelt or the LATCH lower anchors may be attached first, provided a proper installation is achieved. Attach the tether strap afterward, if included with the child restraint.
Using Tether Straps
Many forward-facing child restraints include a tether strap which extends from the back of the child restraint and hooks to an anchoring point called the top tether anchor. Tether straps are available as an accessory for many older child restraints.
Contact the manufacturer of your child restraint for information about ordering a tether strap, or to obtain a longer tether strap if the tether strap on your child restraint does not reach the appropriate top tether anchor in your vehicle. Once you install the child restraint using either the seatbelt, the lower anchors of the LATCH system, or both, you can attach the top tether strap. The tether strap anchors in your vehicle are in the following positions (shown from top view):
E142537
Perform the following steps to install a child restraint with tether anchors: Note: If you install a child restraint with rigid LATCH attachments, do not tighten the tether strap enough to lift the child restraint off your vehicle seat cushion when the child is seated in it. Keep the tether strap just snug without lifting the front of the child restraint. Keeping the child restraint just touching your vehicle seat gives the best protection in a severe crash.
24
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
1. Route the child restraint tether strap over the back of the seat. For the outermost seating positions, route the tether strap under the head restraint and between the head restraint posts. For the center seating positions, route the tether strap over the top of the head restraint. If needed, you can also remove the head restraints.
E142538
2. Locate the correct anchor on the back panel of the rear seat for the selected seating position. The anchors are labeled with the tether strap symbol and are partially covered by the gap panel. Pull the panel back to fully expose the anchors.
4. Tighten the child restraint tether strap according to the manufacturer's instructions. If your child restraint system has a tether strap, and the child restraint manufacturer recommends its use, we also recommend its use.
BOOSTER SEATS
WARNING
Do not put the shoulder section of the seatbelt or allow the child to put the shoulder section of the seatbelt under their arm or behind their back. Failure to follow this instruction could reduce the effectiveness of the seatbelt and increase the risk of injury or death in a crash.
Use a belt-positioning booster seat for children who have outgrown or no longer properly fit in a child safety restraint (generally children who are less than 57 in (1.45 m) tall, are greater than age 4 and less than age 12, and between 40 lb (18 kg) and 80 lb (36 kg) and upward to 100 lb (45 kg) if recommended by your child restraint manufacturer). Many state and provincial laws require that children use approved booster seats until they reach age eight, a height of 57 in (1.45 m) tall, or 80 lb (36 kg).
Booster seats should be used until you can answer YES to ALL of these questions when seated without a booster seat:
E142539
3. Clip the tether strap to the anchor as shown.
25
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
E142595
· Can the child sit all the way back against their vehicle seat backrest with knees bent comfortably at the edge of the seat cushion?
· Can the child sit without slouching? · Does the lap belt rest low across the
hips? · Is the shoulder belt centered on the
shoulder and chest? · Can the child stay seated like this for
the whole trip? Always use booster seats in conjunction with your vehicle lap and shoulder belt. Types of Booster Seats
E68924
· Backless booster seats
If your backless booster seat has a removable shield, remove the shield. If a vehicle seating position has a low seat backrest or no head restraint, a backless booster seat may place your child's head (as measured at the tops of the ears) above the top of the seat. In this case, move the backless booster to another seating position with a higher seat backrest or head restraint and lap and shoulder belts, or consider using a high back booster seat.
E70710
· High back booster seats If, with a backless booster seat, you cannot find a seating position that adequately supports your child's head, a high back booster seat would be a better choice. Children and booster seats vary in size and shape. Choose a booster that keeps the lap belt low and snug across the hips, never up across the stomach, and lets you adjust the shoulder belt to cross the chest and rest snugly near the center of the shoulder. The following drawings compare the ideal fit (center) to a shoulder belt uncomfortably close to the neck and a shoulder belt that could slip off the shoulder. The drawings also show how the lap belt should be low and snug across the child's hips.
26
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
E142596
E142597
If the booster seat slides on the vehicle seat upon which it is being used, placing a rubberized mesh sold as shelf or carpet liner under the booster seat may improve this condition. Do not introduce any item thicker than this under the booster seat. Check with the booster seat manufacturer's instructions.
CHILD RESTRAINT POSITIONING
WARNINGS Airbags can kill or injure a child in a child seat. Never place a rear-facing child seat in front of an active airbag. If you must use a forward-facing child seat in the front seat, move the vehicle seat upon which the child seat is installed all
WARNINGS
the way back. When possible, all children age 12 and under should be properly restrained in a rear seating position. If all children cannot be seated and restrained properly in a rear seating position, properly restrain the largest child in the front seat.
Always carefully follow the instructions and warnings provided by the manufacturer of any child restraint to determine if the restraint device is appropriate for your child's size, height, weight, or age. Follow the child restraint manufacturer's instructions and warnings provided for installation and use in conjunction with the instructions and warnings provided by your vehicle
27
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
WARNINGS
manufacturer. A safety seat that is improperly installed or utilized, is inappropriate for your child's height, age, or weight or does not properly fit the child may increase the risk of serious injury or death.
Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash, which may result in serious injury or death.
Never use pillows, books, or towels to boost a child. They can slide around and increase the likelihood of injury or death in a crash.
WARNINGS
Always restrain an unoccupied child seat or booster seat. These objects may become projectiles in a crash or sudden stop, which may increase the risk of serious injury.
Never place, or allow a child to place, the shoulder belt under a child's arm or behind the back because it reduces the protection for the upper part of the body and may increase the risk of injury or death in a crash.
To avoid risk of injury, do not leave children or pets unattended in your vehicle.
Recommendations for attaching child safety restraints for children
Use any attachment method as indicated below by X
Restraint Type
Combined weight of child and child seat
LATCH (lower anchors and top tether anchor)
Rear facing Up to 65 lb child seat (29.5 kg)
Rear facing Over 65 lb child seat (29.5 kg)
Forward facing
child seat
Up to 65 lb (29.5 kg)
X
Forward facing
child seat
Over 65 lb (29.5 kg)
LATCH (lower anchors only)
Safety belt and top tether anchor
Safety belt and LATCH
(lower anchors and top
tether anchor)
Safety belt only
X
X
X
X
X
X
X
Note: The child seat must rest tightly against the vehicle seat upon which it is installed. It may be necessary to lift or remove the head restraint. See Seats (page 115).
CHILD SAFETY LOCKS
When these locks are set, the rear doors cannot be opened from the inside.
28
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Child Safety
E112197
The childproof locks are located on the rear edge of each rear door and must be set separately for each door. Left-Hand Side Turn counterclockwise to lock and clockwise to unlock. Right-Hand Side Turn clockwise to lock and counterclockwise to unlock.
29
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seatbelts
PRINCIPLE OF OPERATION
WARNINGS
Always drive and ride with your seatback upright and the lap belt snug and low across the hips.
To reduce the risk of injury, make sure children sit where they can be properly restrained.
Never let a passenger hold a child on his or her lap while your vehicle is moving. The passenger cannot protect the child from injury in a crash.
All occupants of your vehicle, including the driver, should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.
It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and safety belts. Be sure everyone in your vehicle is in a seat and using a safety belt properly.
In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a safety belt.
Each seating position in your vehicle has a specific safety belt assembly which is made up of one buckle and one tongue that are designed to be used as a pair. 1) Use the shoulder belt on the outside shoulder only. Never wear the shoulder belt under the arm. 2) Never swing the safety belt around your neck over the inside shoulder. 3) Never use a single belt for more than one person.
When possible, all children 12 years old and under should be properly restrained in a rear seating position.
WARNINGS Safety belts and seats can become hot in a vehicle that has been closed up in sunny weather; they could burn a small child. Check seat covers and buckles before you place a child anywhere near them.
Front and rear seat occupants, including pregnant women, should wear safety belts for optimum protection in an accident.
All seating positions in this vehicle have lap and shoulder safety belts. All occupants of the vehicle should always properly wear their safety belts, even when an airbag supplemental restraint system is provided.
The safety belt system consists of: · lap and shoulder safety belts · shoulder safety belt with automatic
locking mode, (except driver safety belt) · height adjuster at the front outboard seating positions · retractor and anchor pretensioner at the front outboard seating positions · belt tension sensor at the front outboard passenger seating position
E71880
· safety belt warning light and chime
E67017
· crash sensors and monitoring system with readiness indicator.
The safety belt pretensioners are designed to activate in frontal, near-frontal and side crashes, and in rollovers. The safety belt pretensioners on the retractor and anchor at the front seating positions are designed to tighten the safety belts firmly against
30
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seatbelts
the occupant's body when activated. This helps increase the effectiveness of the safety belts. In frontal crashes, the safety belt pretensioners can be activated alone or, if the crash is of sufficient severity, together with the front airbags.
FASTENING THE SEATBELTS
The front outboard and rear safety restraints in the vehicle are combination lap and shoulder belts.
2. To unfasten, press the release button and remove the tongue from the buckle.
E142587
1. Insert the belt tongue into the proper buckle (the buckle closest to the direction the tongue is coming from) until you hear a snap and feel it latch. Make sure the tongue is securely fastened in the buckle.
E142589
When in use, place the rear seatbelts in the belt guides on the outermost seat backrests.
Using Seatbelts During Pregnancy
WARNING
Always ride and drive with your seatback upright and properly fasten your seatbelt. Fit the lap portion of the seatbelt snugly and low across the hips. Position the shoulder portion of the seatbelt across your chest. Pregnant women must follow this practice. See the following figure.
E142588
E142590
31
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seatbelts
Pregnant women should always wear their seatbelt. Position the lap belt portion of a combination lap and shoulder belt low across the hips below the belly and worn as tight as comfort allows. Position the shoulder belt to cross the middle of the shoulder and the center of the chest.
Seatbelt Locking Modes
WARNING
If your vehicle is involved in a crash, have the seatbelts and associated components inspected as soon as possible. Failure to follow this instruction could result in personal injury or death.
All safety restraints in the vehicle are combination lap and shoulder belts. The driver seatbelt has the first type of locking mode, and the front outboard passenger and rear seat seatbelts have both types of locking modes described as follows:
Vehicle Sensitive Mode
This is the normal retractor mode, which allows free shoulder belt length adjustment to your movements and locking in response to vehicle movement. For example, if the driver brakes suddenly or turns a corner sharply, or the vehicle receives an impact of about 5 mph (8 km/h) or more, the combination seatbelts lock to help reduce forward movement of the driver and passengers.
In addition, the retractor is designed to lock if you pull the webbing out too quickly. If the seatbelt retractor locks, slowly lower the height adjuster to allow the seatbelt to retract. If the retractor does not unlock, pull the seatbelt out slowly then feed a
small length of webbing back toward the stowed position. For rear seatbelts, recline the rear seat backrest or push the seat backrest cushion away from the seatbelt. Feed a small length of webbing back toward the stowed position.
Automatic Locking Mode In this mode, the shoulder belt automatically pre-locks. The belt still retracts to remove any slack in the shoulder belt. The automatic locking mode is not available on the driver seatbelt.
When to Use the Automatic Locking Mode Use this mode any time a child safety seat, except a booster, is installed in passenger front or rear seating positions. Properly restrain children 12 years old and under in a rear seating position whenever possible. See Child Safety (page 18).
How to Use the Automatic Locking Mode
E142591
1. Buckle the combination lap and shoulder belt.
2. Grasp the shoulder portion and pull downward until you pull the entire belt out. Allow the belt to retract. As the belt retracts, you will hear a clicking sound. This indicates the seatbelt is now in the automatic locking mode.
32
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seatbelts
How to Disengage the Automatic Locking Mode
Unbuckle the combination lap and shoulder belt and allow it to retract completely to disengage the automatic locking mode and turn on the vehicle sensitive (emergency) locking mode.
How to Extract Seatbelts in the Rear Outermost Positions
Seatbelts in the rear outermost positions can lock if you firmly return the seat backrest to its upright position. You can unlock the seatbelts using the following procedures.
For vehicles where the rear seats recline:
1. Recline the seat to its full rear recline position.
2. The seatbelt should then unlock.
3. Return the seat backrest to its desired upright position.
For vehicles with rear seats that do not recline or are locked with the seat in its full rear recline position:
1. Grasp the seatbelt webbing at the top of the seat backrest.
2. Pull the seatbelt webbing forward, firmly.
3. After pulling the seatbelt forward, allow the seatbelt to feed back into the seatbelt retractor as much as possible. If necessary, press the seat backrest down to allow the seatbelt webbing to retract further.
4. The seatbelt should then unlock.
5. If the seatbelt does not unlock, repeat steps 1-3.
SEATBELT HEIGHT ADJUSTMENT
WARNING
Position the seatbelt height adjusters so that the belt rests across the middle of your shoulder. Failure to adjust the seatbelt correctly could reduce the effectiveness of the seatbelt and increase the risk of injury in a crash.
E87511
To adjust the shoulder belt height, squeeze the button and slide the height adjuster up or down. Release the button and pull down on the height adjuster to make sure it is locked in place.
SEATBELT WARNING LAMP AND INDICATOR CHIME
This lamp illuminates and an
audible warning will sound if the
E71880
driver seatbelt has not been
fastened when the vehicle's ignition is
turned on.
33
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seatbelts
Conditions of operation
If
Then
The driver seatbelt is not buckled before The seatbelt warning light illuminates and
the ignition switch is turned to the on posi- the warning chime sounds for a few
tion...
seconds.
The driver seatbelt is buckled while the indicator light is illuminated and the warning chime is sounding...
The seatbelt warning light and warning chime turn off.
The driver seatbelt is buckled before the The seatbelt warning light and indicator
ignition switch is turned to the on position...
chime remain off.
SEATBELT REMINDER
Belt-MinderTM
This feature supplements the safety belt warning function by providing additional reminders that intermittently sound a tone and illuminate the safety belt warning light when you are in the driver seat or you have a front seat passenger and a safety belt is unbuckled.
The system uses information from the front passenger sensing system to determine if a front seat passenger is present and therefore potentially in need of a warning. To avoid activating the Belt-Minder feature for objects you place in the front passenger seat, only the front seat passengers receive warnings as determined by the front passenger sensing system.
If the Belt-Minder warnings expire (warnings for about five minutes) for one passenger (driver or front passenger), the other passenger can still cause the Belt-Minder feature to turn on.
34
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seatbelts
If...
Then...
You and the front seat passenger buckle your safety belts before you switch the ignition on or less than 1-2 minutes elapse
after you switch the ignition on...
The Belt-Minder feature will not activate.
You or the front seat passenger do not
The Belt-Minder feature activates, the
buckle your safety belts before your vehicle safety belt warning light illuminates and a
reaches at least 6 mph (9.7 km/h) and 1-2 warning tone sounds for 6 seconds every
minutes elapse after you switch the ignition 25 seconds, repeating for about 5 minutes
on...
or until you and the front seat passenger
buckle your safety belts.
The safety belt for the driver or front
The Belt-Minder feature activates, the
passenger is unbuckled for about 1 minute safety belt warning light illuminates and a
while the vehicle is traveling at least 6 mph warning tone sounds for 6 seconds every
(9.7 km/h) and more than 1-2 minutes 25 seconds, repeating for about 5 minutes
elapse after you switch the ignition on... or until you and the front seat passenger
buckle your safety belts.
Deactivating and Activating the Belt-Minder Feature
WARNING
While the system allows you to deactivate it, this system is designed to improve your chances of being safely belted and surviving an accident. We recommend you leave the system activated for yourself and others who may use your vehicle.
Note: The driver and front passenger warnings switch on and off independently. When you perform this procedure for one seating position, do not buckle the other position as this will terminate the process.
Read Steps 1 - 4 thoroughly before proceeding with the programming procedure.
Before following the procedure, make sure that:
· The parking brake is set.
· The transmission is in park (P).
· The ignition is off.
· The driver and front passenger safety belts are unbuckled.
1. Switch the ignition on. Do not start the engine.
2. Wait until the safety belt warning light turns off (about one minute). After Step 2, wait an additional five seconds before proceeding with Step 3. Once you start Step 3, you must complete the procedure within 60 seconds.
3. For the seating position you are switching off, buckle then unbuckle the safety belt three times at a moderate speed, ending in the unbuckled state. After Step 3, the safety belt warning light turns on.
35
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seatbelts
4. While the safety belt warning light is on, buckle and then unbuckle the safety belt. After Step 4, the safety belt warning light flashes for confirmation.
· This will switch the feature off for that seating position if it is currently on.
· This will switch the feature on for that seating position if it is currently off.
CHILD RESTRAINT AND SEATBELT MAINTENANCE
Inspect the vehicle seatbelts and child safety seat systems periodically to make sure they work properly and are not damaged. Inspect the vehicle and child restraint seatbelts to make sure there are no nicks, tears or cuts. Replace if necessary. All vehicle seatbelt assemblies, including retractors, buckles, front seatbelt buckle assemblies, buckle support assemblies (slide bar-if equipped), shoulder belt height adjusters (if equipped), shoulder belt guide on seat backrest (if equipped), child safety seat LATCH and tether anchors, and attaching hardware, should be inspected after a crash. Read the child restraint manufacturer's instructions for additional inspection and maintenance information specific to the child restraint.
We recommend that all seatbelt assemblies in use in vehicles involved in a crash be replaced. However, if the crash was minor and an authorized dealer finds that the belts do not show damage and continue to operate properly, they do not need to be replaced. Seatbelt assemblies not in use during a crash should also be inspected and replaced if either damage or improper operation is noted.
Properly care for seatbelts. See Vehicle Care (page 266).
SEATBELT EXTENSION
WARNINGS
Persons who fit into the vehicle's seatbelt should not use an extension. Unnecessary use could result in serious personal injury in the event of a crash.
Only use extensions provided free of charge by Ford Motor Company dealers. The dealer will provide an extension designed specifically for this vehicle, model year and seating position. The use of an extension intended for another vehicle, model year or seating position may not offer you the full protection of your vehicle's seatbelt restraint system.
Never use seatbelt extensions to install child restraints.
Do not use a seatbelt extension with an inflatable seatbelt.
Do not use extensions to change the fit of the belt across the torso, over the lap or to make the seatbelt buckle easier to reach.
If, because of body size or driving position, it is not possible to properly fasten the seatbelt over your lap and shoulder, an extension that is compatible with the seatbelts is available free of charge from Ford Motor Company dealers. Only Ford seatbelt extensions made by the original equipment seatbelts manufacturer should be used with Ford seatbelts. Ask your authorized dealer if your extension is compatible with your Ford vehicle restraint system.
36
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Personal Safety SystemTM
The Personal Safety System provides an improved overall level of frontal crash protection to front seat occupants and is designed to help further reduce the risk of airbag-related injuries. The system is able to analyze different occupant conditions and crash severity before activating the appropriate safety devices to help better protect a range of occupants in a variety of frontal crash situations.
The Vehicle Personal Safety System consists of:
· Driver and passenger dual-stage airbag supplemental restraints.
· Front seat outboard seatbelts with pretensioners, energy management retractors and seatbelt usage sensors.
· Driver seat position sensor.
· Passenger seat position sensor.
· Front passenger sensing system.
· Passenger airbag off and on indicator lamp.
· Front crash severity sensors.
· Restraints control module with impact and safing sensors.
· Restraint system warning lamp and tone.
· The electrical wiring for the airbags, crash sensors, seatbelt pretensioners, front seatbelt usage sensors, driver seat position sensor, front passenger sensing system and indicator lights.
How Does the Personal Safety System Work?
The Personal Safety System can adapt the deployment strategy of the safety devices according to crash severity and occupant conditions. A collection of crash and occupant sensors provides information to the restraints control module. During a crash, the restraints control module may deploy the seatbelt pretensioners, one or both stages of the dual-stage airbags based on crash severity and occupant conditions.
37
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Supplementary Restraints System
PRINCIPLE OF OPERATION
WARNINGS
Airbags do not inflate slowly or gently, and the risk of injury from a deploying airbag is the greatest close to the trim covering the airbag module.
All occupants of your vehicle, including the driver, should always properly wear their seatbelts, even when an airbag supplemental restraint system is provided. Failure to properly wear your seatbelt could seriously increase the risk of injury or death.
Even with advanced restraints systems, properly restrain children 12 and under in a rear seating position. Failure to follow this could seriously increase the risk of injury or death.
Do not place your arms on the airbag cover or through the steering wheel. Failure to follow this instruction could result in personal injury.
Keep the areas in front of the airbags free from obstruction. Do not affix anything to or over the airbag covers. Objects could become projectiles during airbag deployment or in a sudden stop. Failure to follow this instruction could result in personal injury or death.
Airbags can kill or injure a child in a child restraint. Never place a rear-facing child restraint in front of an active airbag. If you must use a forward-facing child restraint in the front seat, move the seat upon which the child restraint is installed all the way back.
Do not attempt to service, repair, or modify the supplementary restraint system or associated components. Failure to follow this instruction could result in personal injury or death.
WARNINGS
Several airbag system components get hot after inflation. To reduce the risk of injury, do not touch them after inflation.
If a supplementary restraint system component has deployed, it will not function again. Have the system and associated components inspected as soon as possible. Failure to follow this instruction could result in personal injury or death.
The airbags are a supplemental restraint system and are designed to work with the seatbelts to help protect the driver and right front passenger from certain upper body injuries. Airbags do not inflate slowly; there is a risk of injury from a deploying airbag.
Note: You will hear a loud bang and see a cloud of harmless powdery residue if an airbag deploys. This is normal.
The airbags inflate and deflate rapidly upon activation. After airbag deployment, it is normal to notice a smoke-like, powdery residue or smell the burnt propellant. This may consist of cornstarch, talcum powder (to lubricate the bag) or sodium compounds (for example, baking soda) that result from the combustion process that inflates the airbag. Small amounts of sodium hydroxide may be present which may irritate the skin and eyes, but none of the residue is toxic.
While the system is designed to help reduce serious injuries, contact with a deploying airbag may also cause abrasions or swelling. Temporary hearing loss is also a possibility as a result of the noise associated with a deploying airbag. Because airbags must inflate rapidly and with considerable force, there is the risk of death or serious injuries such as fractures, facial and eye injuries or internal injuries,
38
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Supplementary Restraints System
particularly to occupants who are not properly restrained or are otherwise out of position at the time of airbag deployment. Thus, it is extremely important that occupants be properly restrained as far away from the airbag module as possible while maintaining vehicle control.
Routine maintenance of the airbags is not required.
DRIVER AND PASSENGER AIRBAGS
WARNINGS
Do not place your arms on the airbag cover or through the steering wheel. Failure to follow this instruction could result in personal injury.
Keep the areas in front of the airbags free from obstruction. Do not affix anything to or over the airbag covers. Objects could become projectiles during airbag deployment or in a sudden stop. Failure to follow this instruction could result in personal injury or death.
Airbags can kill or injure a child in a child restraint. Never place a rear-facing child restraint in front of an active airbag. If you must use a forward-facing child restraint in the front seat, move the seat upon which the child restraint is installed all the way back.
E151127
The driver and front passenger airbags will deploy during significant frontal and near frontal crashes.
The driver and passenger front airbag system consists of:
· Driver and passenger airbag modules.
· Front passenger sensing system.
· Crash sensors and monitoring
system with readiness indicator.
E67017
See Crash Sensors and Airbag
Indicator (page 45).
Proper Driver and Front Passenger Seating Adjustment
WARNING
National Highway Traffic Safety Administration (NHTSA) recommends a minimum distance of at least 10 in (25 cm) between an occupant's chest and the driver airbag module.
To properly position yourself away from the airbag:
· Move your seat to the rear as far as you can while still reaching the pedals comfortably.
· Recline the seat slightly (one or two degrees) from the upright position.
39
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Supplementary Restraints System
After all occupants have adjusted their seats and put on seatbelts, it is very important that they continue to sit properly. A properly seated occupant sits upright, leaning against the seatback, and centered on the seat cushion, with their feet comfortably extended on the floor. Sitting improperly can increase the chance of injury in a crash event. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.
Children and Airbags
WARNING
Airbags can kill or injure a child in a child restraint. Never place a rear-facing child restraint in front of an active airbag. If you must use a forward-facing child restraint in the front seat, move the seat upon which the child restraint is installed all the way back.
FRONT PASSENGER SENSING SYSTEM
WARNINGS Even with Advanced Restraints Systems, children 12 and under should be properly restrained in a rear seating position. Failure to follow this could seriously increase the risk of injury or death.
Sitting improperly out of position or with the seatback reclined too far can take off weight from the seat cushion and affect the decision of the front passenger sensing system, resulting in serious injury or death in a crash.
Always sit upright against your seat back, with your feet on the floor.
Any alteration or modification to the front passenger seat may affect the performance of the front passenger sensing system which could seriously increase the risk of injury or death.
This system works with sensors that are part of the front passenger seat and seatbelt to detect the presence of a properly-seated occupant and determine if the front passenger frontal airbag should be enabled (may inflate) or not.
E142846
Children must always be properly restrained. Accident statistics suggest that children are safer when properly restrained in the rear seating positions than in the front seating position. Failure to follow these instructions may increase the risk of injury in a crash.
E225141
The indicator lamp is on the center stack of the instrument panel.
The front passenger sensing system uses a passenger airbag status indicator that will illuminate indicating that the front passenger frontal airbag is either ON (enabled) or OFF (disabled).
40
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Supplementary Restraints System
Note: The passenger airbag status indicator OFF and ON indicator lamps will illuminate for a short period of time when the ignition is first turned on to confirm it is functional.
The front passenger sensing system is designed to disable (will not inflate) the front passenger frontal airbag when the front passenger seat is unoccupied, or a rear facing infant seat, a forward-facing child restraint, or a booster seat is detected. Even with this technology, parents are strongly encouraged to always properly restrain children in the rear seat. The sensor also turns off the passenger front airbag and seat-mounted side airbag when the passenger seat is empty.
· When the front passenger sensing system disables (will not inflate) the front passenger frontal airbag, the passenger airbag status indicator will illuminate the OFF lamp and stay lit to remind you that the front passenger frontal airbag is disabled.
· If the child restraint has been installed and the passenger airbag status indicator illuminates the ON lamp, then turn the vehicle off, remove the child restraint from the vehicle and reinstall the restraint following the child restraint manufacturer's instructions.
The front passenger sensing system is designed to enable (may inflate) the front passenger frontal airbag anytime the system senses that a person of adult size is sitting properly in the front passenger seat.
· When the front passenger sensing system enables the front passenger frontal airbag (may inflate), the passenger airbag status indicator will illuminate the ON lamp and remain illuminated.
If a person of adult size is sitting in the front passenger seat, but the passenger airbag is disabled, it is possible that the person is not sitting properly in the seat. If this happens:
· Turn the vehicle off and ask the person to place the seatback in the full upright position.
· Have the person sit upright in the seat, centered on the seat cushion, with the person's legs comfortably extended.
· Restart the vehicle and have the person remain in this position for about two minutes. This will allow the system to detect that person and enable the passenger's frontal airbag.
· If the passenger airbag status OFF light remains lit even after this, the person should be advised to ride in the rear seat.
Occupant Empty Child Adult
Passenger airbag status indicator OFF: Lit ON: Unlit OFF: Lit ON: Unlit OFF: Unlit ON: Lit
Passenger airbag Disabled Disabled Enabled
41
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Supplementary Restraints System
Note: When the passenger airbag status OFF light is illuminated, the passenger side airbag (seat mounted) may be disabled to avoid the risk of airbag deployment injuries.
After all occupants have adjusted their seats and put on seatbelts, it is very important that they continue to sit properly. A properly seated occupant sits upright, leaning against the seatback, and centered on the seat cushion, with their feet comfortably extended on the floor. Sitting improperly can increase the chance of injury in a crash event. For example, if an occupant slouches, lies down, turns sideways, sits forward, leans forward or sideways, or puts one or both feet up, the chance of injury during a crash is greatly increased.
If you think that the status of the passenger airbag off indicator lamp is incorrect, check for the following:
· Objects lodged underneath the seat.
· Objects between the seat cushion and the center console.
· Objects hanging off the seatback.
· Objects stowed in the seatback map pocket.
· Objects placed on the occupant's lap.
· Cargo interference with the seat.
· Other passengers pushing or pulling on the seat.
· Rear passenger feet and knees resting or pushing on the seat.
The conditions listed above may cause the weight of a properly seated occupant to be incorrectly interpreted by the passenger sensing system. The person in the front passenger seat may appear heavier or lighter due to the conditions described in the list above.
Make sure the front passenger
sensing system is operating
E67017
properly. See Crash Sensors
and Airbag Indicator (page 45).
Do not attempt to repair or service the system; take your vehicle immediately to an authorized dealer.
If it is necessary to modify an advanced front airbag system to accommodate a person with disabilities, contact your authorized dealer.
SIDE AIRBAGS
WARNINGS
Do not place objects or mount equipment on or near the airbag cover, on the side of the seatbacks (of the front seats), or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.
Do not use accessory seat covers. The use of accessory seat covers may prevent the deployment of the side airbags and increase the risk of injury in an accident.
Do not lean your head on the door. The side airbag could injure you as it deploys from the side of the seatback.
Do not attempt to service, repair, or modify the airbag, its fuses or the seat cover on a seat containing an airbag as you could be seriously injured or killed. Contact your authorized dealer as soon as possible.
If the side airbag has deployed, the airbag will not function again. The side airbag system (including the seat) must be inspected and serviced by an authorized dealer. If the airbag is not replaced, the unrepaired area will increase the risk of injury in a crash.
42
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Supplementary Restraints System
The side airbags are located on the outboard side of the seatbacks of the front seats. In certain sideways crashes, the airbag on the side affected by the crash will be inflated. The airbag was designed to inflate between the door panel and occupant to further enhance the protection provided occupants in side impact crashes.
E152533
The system consists of the following: · A label or embossed side panel
indicating that side airbags are fitted to your vehicle. · Side airbags located inside the driver and front passenger seatbacks. · Front passenger sensing system.
E67017
· Crash sensors and monitoring system with readiness indicator. See Crash Sensors and Airbag Indicator (page 45).
Note: The passenger sensing system will deactivate the passenger seat-mounted side airbag if it detects an empty passenger seat.
The design and development of the side airbag system included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags.
DRIVER KNEE AIRBAG
A driver's knee airbag is located under the instrument panel. During a crash, the restraints control module may activate the driver's knee airbag based on crash severity and occupant conditions. Under certain crash and occupant conditions, the driver's knee airbag may deploy but the driver's front airbag may not activate. As with front and side airbags, it is important to be properly seated and restrained to reduce the risk of death or serious injury.
Make sure the knee airbag is
operating properly. See Crash
E67017
Sensors and Airbag Indicator
(page 45).
SAFETY CANOPYTM
WARNINGS Do not place objects or mount equipment on or near the headliner at the siderail that may come into contact with a deploying curtain airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.
Do not lean your head on the door. The curtain airbag could injure you as it deploys from the headliner.
43
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Supplementary Restraints System
WARNINGS
Do not attempt to service, repair, or modify the supplementary restraint system or associated components. Failure to follow this instruction could result in personal injury or death.
All occupants of your vehicle, including the driver, should always properly wear their seatbelts, even when an airbag supplemental restraint system is provided. Failure to properly wear your seatbelt could seriously increase the risk of injury or death.
To reduce risk of injury, do not obstruct or place objects in the deployment path of the airbag.
If a supplementary restraint system component has deployed, it will not function again. Have the system and associated components inspected as soon as possible. Failure to follow this instruction could result in personal injury or death.
The Safety Canopy deploys during significant side crashes or when a certain likelihood of a rollover event is detected by the rollover sensor. The Safety Canopy is mounted to the roof side rail sheet metal, behind the headliner, above each row of seats. In certain sideways crashes or rollover events, the Safety Canopy will be activated, regardless of which seats are occupied. The Safety Canopy is designed to inflate between the side window area and occupants to further enhance protection provided in side impact crashes and rollover events.
E75004
The system consists of the following:
· Safety Canopy curtain airbags above the trim panels over the front and rear side windows identified by a label or wording on the headliner or roof-pillar trim.
· A flexible headliner which opens above the side doors to allow air curtain deployment
· Crash sensors and monitoring
system with a readiness
E67017
indicator. See Crash Sensors
and Airbag Indicator (page 45).
Properly restrain children 12 years old and under in the rear seats. The Safety Canopy will not interfere with children restrained using a properly installed child or booster seat because it is designed to inflate downward from the headliner above the doors along the side window opening.
The design and development of the Safety Canopy included recommended testing procedures that were developed by a group of automotive safety experts known as the Side Airbag Technical Working Group. These recommended testing procedures help reduce the risk of injuries related to the deployment of side airbags (including the Safety Canopy).
44
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Supplementary Restraints System
CRASH SENSORS AND AIRBAG INDICATOR
WARNING
Modifying or adding equipment to the front end of your vehicle (including hood, bumper system, frame, front end body structure, tow hooks and hood pins) may affect the performance of the airbag system, increasing the risk of injury. Do not modify or add equipment to the front end of your vehicle.
Your vehicle has a collection of crash and occupant sensors which provide information to the restraints control module. The restraints control module deploys (activates) the front seatbelt pretensioners, driver airbag, passenger airbag, knee airbag(s), seat mounted side airbags and Safety Canopy airbags. Based on the type of crash, the restraints control module will deploy the appropriate safety devices.
The restraints control module also monitors the readiness of the above safety devices plus the crash and occupant sensors. The readiness of the safety system is indicated by a warning indicator light in the instrument cluster or by a backup tone if the warning light is not working. Routine maintenance of the airbag is not required.
A difficulty with the system is indicated by one or more of the following:
E67017
The readiness light will not illuminate immediately after you switch the ignition on.
· The readiness light either flashes or stays lit.
· You will hear a series of five beeps. The tone pattern repeats periodically until the problem, the light or both are repaired.
If any of these things happen, even intermittently, have the supplemental restraint system serviced at an authorized dealer immediately. Unless serviced, the system may not function properly in the event of a crash.
The seatbelt pretensioners and the front airbag supplemental restraint system are designed to activate when the vehicle sustains frontal deceleration sufficient to cause the restraints control module to deploy a safety device.
The fact that the seatbelt pretensioners or front airbags did not activate for both front seat occupants in a crash does not mean that something is wrong with the system. Rather, it means the restraints control module determined the accident conditions (crash severity, belt usage) were not appropriate to activate these safety devices.
· The design of the front airbags is to activate only in frontal and near-frontal crashes (not rollovers, side impacts or rear impacts unless the crash causes sufficient frontal deceleration).
· The design of the seatbelt pretensioners is to activate in frontal, near-frontal, side crashes and rollovers.
45
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Supplementary Restraints System
· The knee airbag(s) may deploy based on crash severity and occupant conditions.
· The design of the side airbags is to inflate in certain side crashes. The design of the Safety Canopy is to inflate in certain side impact crashes and when a certain likelihood of rollover is detected by the rollover sensor. Side airbags and Safety Canopy airbags may activate in other types of crashes if the vehicle experiences sufficient sideways motion or deformation.
AIRBAG DISPOSAL
Contact your authorized dealer as soon as possible. Airbags must be disposed of by qualified personnel.
46
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Keys and Remote Controls
GENERAL INFORMATION ON RADIO FREQUENCIES
This device complies with Part 15 of the FCC Rules and with Industry Canada license-exempt RSS standard(s). Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) This device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term IC before the radio certification number only signifies that Industry Canada technical specifications were met.
The typical operating range for your transmitter is approximately 33 ft (10 m). Vehicles with the remote start feature will have a greater range.
One of the following could cause a decrease in operating range:
· Weather conditions.
· Nearby radio towers.
· Structures around the vehicle.
· Other vehicles parked next to your vehicle.
The radio frequency used by your remote control can also be used by other radio transmitters, for example amateur radios, medical equipment, wireless headphones, wireless remote controls, cell phones, battery chargers and alarm systems. If the frequencies are jammed, you will not be able to use your remote control. You can lock and unlock the doors with the key.
Note: Make sure to lock your vehicle before leaving it unattended.
Note: If you are in range, the remote control will operate if you press any button unintentionally. Note: The remote control contains sensitive electrical components. Exposure to moisture or impact may cause permanent damage.
Intelligent Access (If Equipped)
The system uses a radio frequency signal to communicate with your vehicle and authorize your vehicle to unlock when one of the following conditions are met: · You activate the front exterior door
handle switch. · You press the luggage compartment
button. · You press a button on the transmitter. If excessive radio frequency interference is present in the area or if the transmitter battery is low, you may need to mechanically unlock your door. You can use the mechanical key blade in your intelligent access key to open the driver door in this situation. See Remote Control (page 47).
REMOTE CONTROL
Integrated Keyhead Transmitter (If
Equipped)
E222511
Use the key blade to start your vehicle and unlock or lock the driver door from outside your vehicle. The transmitter portion functions as the remote control.
47
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Keys and Remote Controls
E138615
Note: Your vehicle keys came with a security label that provides important key cut information. Keep the label in a safe place for future reference.
Intelligent Access Key (If Equipped)
Note: You may not be able to shift out of park (P) unless the intelligent access key is inside your vehicle.
Note: A three-button remote control operates similarly.
E142431
The intelligent access key also contains a removable mechanical key blade that you can use to unlock the driver door. Slide the release on the back of the transmitter to release the key blade, then pull the blade out.
E138616
Your intelligent access key operates the power locks and the remote start system. The key must be in your vehicle to activate the push-button start system.
E138618
Note: Your vehicle keys came with a security label that provides important key cut information. Keep the label in a safe place for future reference.
Replacing the Battery
Note: Refer to local regulations when disposing of transmitter batteries.
Note: Do not wipe off any grease on the battery terminals or on the back surface of the circuit board.
Note: Replacing the battery does not erase the programmed key from your vehicle. The transmitter should operate normally.
48
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Keys and Remote Controls
The remote control uses one coin-type three-volt lithium battery CR2032 or equivalent. Integrated Keyhead Transmitter
E138619
1. Twist a thin coin in the slot of the transmitter near the key ring to remove the battery cover.
2. Remove the old battery.
E142432
2. Twist a thin coin under the tab hidden behind the backup key head to remove the battery cover. Do not use the backup key to remove the cover or you could damage the intelligent access key.
E138620
3. Insert the new battery. Refer to the instructions inside the transmitter for the correct orientation of the battery. Press the battery down to make sure it is fully in the housing.
4. Snap the battery cover back onto the transmitter.
Intelligent Access Key
1. Remove the backup key from the transmitter.
E138622
3. Remove the old battery.
4. Insert a new battery with the + facing downward. Press the battery down to make sure it is fully in the housing.
5. Snap the battery cover back onto the transmitter and install the backup key.
49
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Keys and Remote Controls
Car Finder
Press the button twice within three seconds. The horn sounds E138623 and the direction indicators flash. We recommend you use this method to locate your vehicle, rather than using the panic alarm.
Note: If locking was not successful or if any door or the liftgate is open, or if the hood is open on vehicles with a perimeter alarm or remote start, the horn sounds twice and the lamps do not flash.
Sounding a Panic Alarm
Note: The panic alarm only operates when the ignition is off.
E138624
Press the button to sound the panic alarm. Press the button again to switch it off.
Remote Start (If Equipped)
WARNING
To avoid exhaust fumes, do not use remote start if your vehicle is parked indoors or in areas that are not well ventilated.
Note: Do not use remote start if your fuel level is low.
E138625
The remote start button is on the transmitter.
This feature allows you to start your vehicle from outside the vehicle. The transmitter has an extended operating range.
Vehicles with automatic climate control can be configured to operate when the vehicle is remote started. See Automatic Climate Control (page 108).
Many states and provinces have restrictions for the use of remote start. Check your local and state or provincial laws for specific requirements regarding remote start systems. The remote start system does not work if: · The ignition is on. · The alarm system is triggered. · You disable the feature. · The hood is open. · The transmission is not in park (P). · The vehicle battery voltage is too low. · The service engine soon indicator was
on the last time your vehicle was driven.
Remote Starting the Vehicle Note: You must press each button within three seconds of each other. If you do not follow this sequence, your vehicle does not start remotely, the direction indicators do not flash twice and the horn does not sound.
E138626
The label on your transmitter details the starting procedure. To remote start your vehicle: 1. Press the lock button to lock all the
doors. 2. Press the remote start button twice.
The direction indicator lamps flash twice.
50
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Keys and Remote Controls
The horn sounds if the system fails to start, unless quiet start is on. Quiet start runs the blower fan at a slower speed to reduce noise. You can switch it on or off in the information display. See General Information (page 91).
Note: If you remote start your vehicle with an intelligent access key, you must press the START/STOP button on the instrument panel once while applying the brake pedal before driving your vehicle.
Remote start does not turn on the power windows and does not automatically start the radio.
The parking lamps remain on and the vehicle runs for 5, 10 or 15 minutes, depending on the setting.
Extending the Vehicle Run Time
Repeat Steps 1 and 2 with the vehicle still running to extend the run time for another remote start duration. If the duration is set to 10 minutes, you can extend the duration for another 10 minutes. For example, if the vehicle had been running from the first remote start for five minutes, the vehicle continues to run now for a total of 20 minutes. You can extend the engine running time duration to a maximum of 30 minutes.
Wait at least five seconds before remote starting after a vehicle shutdown.
Turning the Vehicle Off After Remote Starting
Press the button once. The parking lamps turn off.
E138625
You may have to be closer to the vehicle than when starting due to ground reflection and the added noise of the running vehicle.
You can disable or enable the remote start system through the information display. See General Information (page 91).
REPLACING A LOST KEY OR REMOTE CONTROL
Replacement keys or remote controls can be purchased from an authorized dealer. Authorized dealers can program remote controls for your vehicle. See Passive Anti-Theft System (page 68).
51
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
MyKeyTM
PRINCIPLE OF OPERATION
MyKey allows you to program keys with restricted driving modes to promote good driving habits. All but one of the keys programmed to the vehicle can be activated with these restricted modes.
Any keys that have not been programmed are referred to as administrator keys or admin keys. These can be used to:
· Create a MyKey.
· Program configurable MyKey settings.
· Clear all MyKey features.
When you have created a MyKey, you can access the following information using the information display:
· How many admin keys and MyKeys are programmed to your vehicle.
· The total distance your vehicle has traveled using any MyKey.
Note: All MyKeys are programmed to the same settings. You cannot program them individually.
Note: For vehicles with keyless start, when both a MyKey transmitter and an admin transmitter are present, the admin transmitter will be recognized by the vehicle to start the engine.
Non-configurable Settings
The following settings cannot be changed by an admin key user:
· Belt-minder. You cannot disable this feature. The audio system will mute when the safety belts are not fastened.
· Early low fuel warning. The low-fuel warning activates earlier, giving the MyKey user more time to refuel.
· Driver assist features, if equipped on your vehicle, are forced on: parking aid, blind spot information system (BLIS) with cross traffic alert, lane departure warning and forward collision warning system.
Configurable Settings
With an admin key, you can configure certain MyKey settings when you first create a MyKey and before you recycle the key or restart the vehicle.
You can also change the settings afterward with an admin key:
· A vehicle speed limit can be set. Warnings will be shown in the display followed by an audible tone when your vehicle reaches the set speed. You cannot override the set speed by fully depressing the accelerator pedal or by setting the cruise control.
WARNING
Do not set MyKey maximum speed limit to a limit that will prevent the driver from maintaining a safe speed considering posted speed limits and prevailing road conditions. The driver is always responsible to drive in accordance with local laws and prevailing conditions. Failure to do so could result in accident or injury.
52
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
MyKeyTM
· Vehicle speed minders. Once you select a speed, it will be shown in the display followed by an audible tone when the set vehicle speed is exceeded.
· Audio system maximum volume of 45%. A message will be shown in the display when you attempt to exceed the limited volume. Also, the speed sensitive compensated volume (automatic volume control) feature will be disabled.
· Always on setting. When this is selected you will not be able to disable the traction control system (if your vehicle is equipped with this feature).
CREATING A MYKEY
Use the information display to create a MyKey:
1. Insert the key you want to program into the ignition. If your vehicle is equipped with a push-button start, hold the intelligent access key next to the steering column. Details on the correct fob placement and position is in another chapter. See Starting and Stopping the Engine (page 130).
2. Switch the ignition on.
3. Access the main menu on the information display controls, and select Settings and then MyKey by pressing OK or the > button.
4. Press OK or the > button to select Create MyKey.
5. When prompted, hold the OK button until you see a message informing you to label this key as a MyKey. The programmed restrictions apply when you key off, open and close the driver door and restart your vehicle with the programmed key or transmitter.
MyKey is successfully created. Make sure you label it so you can distinguish it from the admin keys.
You can also program configurable settings for the key(s). Refer to Programming/Changing Configurable Settings.
Programming/Changing Configurable Settings
Use the information display to access your configurable MyKey settings:
1. Switch the ignition on using an admin key or fob.
2. Access the main menu on the information display controls, and select Settings, then MyKey by pressing OK or the > button.
3. Use the arrow buttons to get to a configurable feature.
4. Press OK or > to make a selection. The programmed restrictions apply when you key off, open and close the driver door and restart your vehicle with the programmed key or transmitter.
Note: You can clear or change your MyKey settings at any time during the same key cycle as you created the MyKey. Once you have switched the engine off, however, you will need an admin key to change or clear your MyKey settings.
CLEARING ALL MYKEYS
You can clear or change your MyKey settings using the information display control on the steering wheel. See Information Displays (page 91).
Switch the ignition on using an admin key.
53
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
MyKeyTM
To clear all MyKeys of all MyKey settings, press the left arrow button to access the main menu and scroll to:
Message
Action and Description
Settings
Press the OK button or the right arrow button.
MyKey
Press the OK button or the right arrow button.
Clear MyKey
Press and hold the OK button until the instrument cluster displays the following message.
All MyKeys
Cleared
Note: When you clear your MyKeys, you remove all restrictions and return all MyKeys to their original admin key status.
54
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
MyKeyTM
CHECKING MYKEY SYSTEM STATUS
You can find information on programmed MyKey(s) using the information display control on the steering wheel. See Information Displays (page 91).
To find information on programmed MyKey(s), press the left arrow button to access the main menu and scroll to:
Message
Description
Settings
Press the OK button.
MyKey
Press the OK button.
Select one of the following:
MyKey Dist.
Tracks the distance when drivers use a MyKey. The only way to delete the accumulated distance is by using an admin key to clear your MyKeys. If the distance does not accumulate as expected, then the intended user is not using the MyKey, or an admin key user recently cleared and then recreated a MyKey.
{0} MyKeys
Indicates the number of MyKeys programmed to your vehicle. Use this feature to detect how many MyKeys you have for your vehicle and determine when a MyKey has been deleted.
{0} Admin Keys
Indicates how many admin keys are programmed to your vehicle. Use this feature to determine how many unrestricted keys you have for your vehicle, and detect if an additional MyKey has been programmed.
55
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
MyKeyTM
USING MYKEY WITH REMOTE START SYSTEMS
MyKey is not compatible with non
MYKEY TROUBLESHOOTING
Ford-approved, aftermarket remote start systems. If you choose to install a remote start system, see an authorized dealer for a Ford-approved remote start system.
Condition I cannot create a MyKey.
I cannot program the configurable settings. I cannot clear the MyKeys. I lost the only admin key.
Potential Causes
· The key or transmitter used to start the vehicle does not have admin privileges.
· The key or transmitter used to start the vehicle is the only admin key (there always has to be at least one admin key).
· Vehicles with keyless start: The keyless start transmitter is not placed in the backup position. See Passive Anti-Theft System (page 68).
· SecuriLock passive anti-theft system is disabled or in unlimited mode.
· The key or transmitter used to start your vehicle does not have admin privileges.
· No MyKeys are created. See Creating a MyKey (page 53).
· The key or transmitter used to start your vehicle does not have admin privileges.
· No MyKeys are created. See Creating a MyKey (page 53).
Purchase a new key from an authorized dealer.
56
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
MyKeyTM
I lost a key.
Condition
MyKey distances do not accumulate.
Potential Causes
Program a spare key. See Passive Anti-Theft System (page 68).
· The MyKey user is not using the MyKey. · An admin key holder cleared the MyKeys
and created new MyKeys. · The key system has been reset.
No MyKey functions with the keyless entry transmitter.
· An admin transmitter is present at vehicle start.
· No MyKeys are created. See Creating a MyKey (page 53).
57
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Doors and Locks
LOCKING AND UNLOCKING
You can use the power door lock control or the remote control to lock and unlock your vehicle. Note: Always take your keys and lock all doors when leaving your vehicle.
Power Door Locks
The power door lock control is on the driver and front passenger door panels.
E196954
A Unlock. B Lock.
Door Lock Indicator
An LED on the power door lock control illuminates when you lock the door.
Remote Control
Unlocking the Doors (Two-Stage Unlock)
Press the button to unlock the
driver door.
E138629
Press the button again within
three seconds to unlock all doors. The
direction indicators will flash.
With the ignition off, press and hold both the lock and unlock buttons on the remote control for three seconds to change between driver door or all door unlock mode. The direction indicators will flash twice to indicate a change to the unlocking mode. Driver door mode only unlocks the driver door when you press the unlock button once. All door mode unlocks all doors when you press the unlock button once. The unlocking mode applies to the remote control, keyless entry keypad and intelligent access.
Locking the Doors
E138623
Press the button to lock all doors. The direction indicators will flash.
Press the button again within three seconds to confirm that all the doors are closed. The doors will lock again, the horn will sound and the direction indicators will flash if all the doors and the luggage compartment are closed.
Mislock
If any door or the liftgate is open, or if the hood is open on vehicles with an anti-theft alarm or remote start, the horn will sound twice and the direction indicators will not flash.
Opening the Liftgate
E138630
Press the button twice within three seconds.
Locking and Unlocking the Doors with the Key Blade
Turn the top of the key toward the front of your vehicle once to lock all doors. Turn the top of the key toward the rear of your vehicle once to unlock the driver door only.
58
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Doors and Locks
If the central locking function does not operate, lock the doors individually using the key in the position shown.
E112203
Left-Hand Side Turn clockwise to lock. Right-Hand Side Turn counterclockwise to lock. Opening a Rear Door From the Inside Pull the interior door handle twice to unlock and open a rear door. The first pull unlocks the door and the second pull opens the door.
Activating Intelligent Access (If
Equipped)
General Information
You can unlock and lock the vehicle without taking the keys out of your pocket or purse when your intelligent access key is within 3 ft (1 m) of your vehicle. Intelligent access uses a sensor on the back of the door handle for unlocking and a separate sensor on the face of each door handle for locking. The system does not function if: · Your vehicle battery has no charge. · The key battery has no charge. · The key frequencies are jammed. Note: The system may not function if the passive key is close to metal objects or electronic devices, for example keys or a cell phone. Note: If the system does not function, use the key blade to lock and unlock your vehicle. See Remote Control (page 47).
Unlocking Using Intelligent Access
E248555
With your intelligent access key within 3 ft (1 m) of your vehicle, touch the unlock sensor on the back of the door handle for a brief period and then pull on the door handle to unlock, being careful to not touch the lock sensor at the same time or pulling the door handle too quickly. The intelligent access system requires a brief delay to authenticate your intelligent access key fob.
59
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Doors and Locks
Locking Using Intelligent Access
E248556
With your intelligent access key within 3 ft (1 m) of your vehicle, touch the outer door handle lock sensor for approximately one second to lock, being careful to not touch the unlock sensor on the back of the door handle at the same time. After locking, you can immediately pull on the door handle to confirm locking occurred without inadvertently unlocking.
At the Liftgate
Press the button located in the top of the liftgate pull cup handle to unlatch the liftgate, and then pull on the outside handle.
Smart Unlocks for Integrated Keyhead Transmitter (If Equipped)
This helps to prevent you from locking yourself out of your vehicle if the key is still in the ignition.
When you open one of the front doors and lock your vehicle with the power door lock control, all the doors will lock then unlock and the horn will sound twice if the key is still in the ignition.
You can still lock your vehicle with the key in the ignition by either: · Using the keyless entry keypad with the
driver door closed. · Pressing the lock button on the
transmitter even if the doors are not closed.
If both front doors are closed, you can lock your vehicle by any method, regardless of whether the key is in the ignition or not.
Smart Unlocks for Intelligent Access Keys (If Equipped)
This feature helps to prevent you from locking your intelligent access key inside your vehicle's passenger compartment or rear cargo area.
When you electronically lock your vehicle with any door open, the transmission is in park (P) and the ignition is off, the system searches for an intelligent access key inside your vehicle after you close the last door. If the system finds a key, all of the doors will immediately unlock and the horn will sound twice, indicating that a key is inside.
When you open one of the front doors and lock your vehicle using the power door lock control, all doors will lock then unlock if the ignition is on.
Autolock (If Equipped)
Autolock locks all the doors when:
· All doors are closed.
· The ignition is on.
· You shift into any gear putting your vehicle in motion.
· Your vehicle reaches a speed greater than 12 mph (20 km/h).
Autolock repeats when:
· You open then close any door while the ignition is on and your vehicle speed is 9 mph (15 km/h) or lower.
· Your vehicle reaches a speed greater than 12 mph (20 km/h).
60
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Doors and Locks
Autounlock
Autounlock unlocks all the doors when: · The ignition is on, all the doors are
closed, and your vehicle has been moving at a speed greater than 12 mph (20 km/h). · Your vehicle comes to a stop and you switch the ignition off or to the accessory position. · You open the driver door within 10 minutes of switching the ignition off or to accessory.
Note: The doors do not autounlock if you electronically lock your vehicle after you switch the ignition off and before you open the driver door.
Enabling or Disabling Autounlock
You can enable or disable the autounlock feature in the information display or an authorized dealer can do it for you. See General Information (page 91).
Illuminated Entry
The interior lamps and some exterior lamps illuminate when you unlock the doors with the remote control.
The illuminated entry system turns off the lights if: · The ignition is on. · You press the remote control lock
button. · After 25 seconds of illumination.
The lights will not turn off if: · You turn them on with the lamp
control. · Any door is open.
Illuminated Exit
The interior lamps and some exterior lamps illuminate when all doors are closed and you switch the ignition off.
The lamps turn off if all the doors remain closed and: · 25 seconds have elapsed. · You lock your vehicle from the outside.
Battery Saver
If you leave the courtesy lamps, interior lamps or headlamps on, the battery saver shuts them off 10 minutes after you switch the ignition off.
Accessory Mode Battery Saver for Intelligent Access Keys (If Equipped)
If you leave the ignition on after leaving your vehicle, it turns off 15 minutes after you close all of the doors.
KEYLESS ENTRY (If Equipped)
SECURICODETM KEYLESS ENTRY KEYPAD
The keypad is located near the driver window. It is invisible until touched and then it lights up so you can see and touch the appropriate buttons.
Note: If you enter your entry code too fast on the keypad, the unlock function may not work. Re-enter your entry code more slowly.
61
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Doors and Locks
E138637
You can use the keypad to: · lock or unlock the doors · program and erase user codes · arm and disarm the anti-theft alarm.
You can operate the keypad with the factory-set five-digit entry code. The code is located on the owner's wallet card in the glove box and is available from an authorized dealer. You can also create up to five of your own five-digit personal entry codes.
Programming a Personal Entry Code
To create your own personal entry code:
1. Enter the factory-set code.
2. Press 1·2 on the keypad within five seconds.
3. Enter your personal five-digit code. You must enter each number within five seconds of each other.
4. Press 1·2 on the keypad to save personal code 1.
The doors will lock then unlock to confirm that programming was successful.
To program additional personal entry codes, repeat Steps 1-3, then for Step 4: · press 3·4 to save personal code 2 · press 5·6 to save personal code 3 · press 7·8 to save personal code 4 · press 9·0 to save personal code 5.
Tips: · Do not set a code that uses five of the
same number. · Do not use five numbers in sequential
order. · The factory-set code will work even if
you have set your own personal code.
Erasing a Personal Code
1. Enter the factory-set five-digit code.
2. Press and release 1·2 on the keypad within five seconds.
3. Press and hold 1·2 for two seconds. This must be done within five seconds of completing Step 2.
All personal codes will erase and only the factory-set five-digit code will work.
Anti-Scan Feature
The keypad will go into an anti-scan mode if you enter the wrong code seven times (35 consecutive button presses). This mode disables the keypad for one minute and the keypad lamp will flash.
The anti-scan feature will turn off after: · one minute of keypad inactivity · pressing the unlock button on the
remote control · switching the ignition on · unlocking the vehicle using intelligent
access.
62
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Doors and Locks
Unlocking and Locking the Doors To Unlock the Driver Door Enter the factory-set five-digit code or your personal code. You must press each number within five seconds of each other. The interior lamps will illuminate. Note: All doors will unlock if the two-stage unlocking feature is disabled. See Locking and Unlocking (page 58). To Unlock All Doors Enter the factory-set code or your personal code, then press 3·4 control within five seconds. To Lock All Doors Press and hold 7·8 and 9·0 at the same time with the driver door closed. You do not need to enter the keypad code first.
63
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Liftgate
MANUAL LIFTGATE (If Equipped)
WARNINGS
It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seatbelts. Make sure everyone in your vehicle is in a seat and properly using a seatbelt. Failure to follow this warning could result in serious personal injury or death.
Make sure to close and latch the liftgate to prevent drawing exhaust fumes into your vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate open, keep the vents or windows open so outside air comes into your vehicle. Failure to follow this warning could result in serious personal injury.
Note: Be careful when opening or closing the liftgate in a garage or other enclosed area to avoid damaging the liftgate.
Note: Do not hang anything, for example a bike rack, from the glass or liftgate. This could damage the liftgate and its components.
Note: Do not leave the liftgate open while driving. This could damage the liftgate and its components.
Opening the Liftgate Manually
E138632
Press the button located in the top of the liftgate pull cup handle to unlatch the liftgate, and then pull on the outside handle.
With the Remote Control
E138630
Press the button twice within three seconds.
Closing the Liftgate
E155976
A handle is located inside the liftgate to help with closing.
64
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Liftgate
POWER LIFTGATE (If Equipped)
WARNINGS
It is extremely dangerous to ride in a cargo area, inside or outside of a vehicle. In a crash, people riding in these areas are more likely to be seriously injured or killed. Do not allow people to ride in any area of your vehicle that is not equipped with seats and seatbelts. Make sure everyone in your vehicle is in a seat and properly using a seatbelt. Failure to follow this warning could result in serious personal injury or death.
Make sure to close and latch the liftgate to prevent drawing exhaust fumes into your vehicle. This will also prevent passengers and cargo from falling out. If you must drive with the liftgate open, keep the vents or windows open so outside air comes into your vehicle. Failure to follow this warning could result in serious personal injury.
Keep keys out of reach of children. Do not allow children to operate or play near an open or moving power liftgate. You should supervise the operation of the power liftgate at all times.
Note: Make sure that you close the liftgate before operating or moving your vehicle, especially in an enclosure, like a garage or a parking structure. This could damage the liftgate and its components.
Note: Do not hang anything, for example a bike rack, from the glass or liftgate. This could damage the liftgate and its components.
The liftgate only operates with the transmission in park (P).
Three warning tones sound once as the liftgate begins to power close. Five short chimes indicate a problem with the open or close request, caused by:
· The ignition is on and the transmission is not in park (P).
· The battery voltage is below the minimum operating voltage.
· The vehicle speed is at or above 1 mph (1 km/h)
If the liftgate starts to close after it has fully opened, this indicates there may be excessive weight on the liftgate or a possible strut failure. A repetitive chime sounds and the liftgate closes under control. Remove any excessive weight from the liftgate. If the liftgate continues to close after opening, have the system checked by an authorized dealer.
Opening and Closing the Liftgate
WARNING
Make sure all persons are clear of the power liftgate area before using the power liftgate control.
Note: Make sure the area behind your vehicle is free from obstruction and that there is enough room for you to operate the liftgate.
Note: Be careful when opening or closing the liftgate in a garage or other enclosed area to avoid damaging the liftgate.
Note: Do not leave the liftgate open when you are driving. This could damage the liftgate and its components.
From the Instrument Panel
E138633
With the transmission in Park, press the button on the instrument panel.
Remote Control
E138630
Press the button twice within three seconds.
65
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Liftgate
Outside Control Button
Opening the Liftgate
1. Unlock the liftgate with the remote control or power door unlock control. If an intelligent access key is within 3 ft (1 m) of the liftgate, the liftgate unlocks when you press the liftgate release button.
E138632
2. Press and release the liftgate control button.
Note: Allow the power system to open the liftgate. Manually pushing or pulling the liftgate may activate the system's obstacle detection feature and stop the power operation or reverse its direction, replicate a strut failure, or damage mechanical components.
Closing the Liftgate
WARNING
Keep clear of the liftgate when using the rear switch.
E138636
Press and release the liftgate control button.
Stopping the Liftgate Movement
Note: Do not apply sudden excessive force to the liftgate while it is in motion. This could damage the power liftgate and its components.
You can stop the liftgate movement by doing any of the following: · Pressing the liftgate control button. · Pressing the liftgate button on the
remote control twice. · Pressing the liftgate button on the
instrument panel. · Moving your foot under and away from
the center rear bumper in a single-kick motion.*
*This method only works for vehicles with the hands-free liftgate feature.
Setting the Liftgate Open Height
1. Open the liftgate.
2. Stop the liftgate by pressing the control button on the liftgate when it reaches the desired height.
Note: When the liftgate has stopped moving, you can also manually move it to the desired height.
66
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Liftgate
3. Press and hold the liftgate control button on the liftgate until a tone sounds, indicating programming is complete.
Note: You can only use the liftgate control button to program the height.
Note: You cannot program the height if the liftgate position is too low.
The new open liftgate height is recalled when the power liftgate is opened. To change the programmed height, repeat the above procedure. Once you open the power liftgate, you can manually move it to a different height. You can fully open the liftgate by manually pushing it upward to the maximum open position.
Note: The system recalls the new programmed height, even if you disconnect the battery.
Obstacle Detection
When Closing
The system stops when it detects an obstacle. Two short tones sound and the system reverses to open. When you remove the obstacle, you can power close the liftgate.
Note: Entering your vehicle while the liftgate is closing can cause your vehicle to bounce and activate obstacle detection. To prevent this, let the power liftgate close completely before you enter your vehicle. Before driving off, check the instrument cluster for a liftgate or door ajar message or warning indicator. Failure to do this could result in unintentionally leaving the liftgate open while driving.
When Opening
The system stops when it detects an obstacle and two short tones sound. When you remove the obstacle, you can continue to operate the liftgate.
Hands-Free Feature Make sure you have an intelligent access transmitter within 3 ft (1 m) of the liftgate.
E239081
1. Move your foot under and away from the rear bumper detection area in a single-kick motion. Do not move your foot sideways or the sensors may not detect the motion. Kick between the exhaust and hitch if your vehicle is equipped with a hitch.
2. The liftgate will power open or close. Note: Allow the power system to open the liftgate. Manually pushing or pulling the liftgate may activate the system's obstacle detection feature and stop the power operation or reverse its direction, replicate a strut failure, or damage mechanical components. Note: Splashing water may cause the hands-free liftgate to open. Keep the intelligent access key away from the rear bumper detection area when washing your vehicle.
67
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Security
PASSIVE ANTI-THEFT SYSTEM
Note: The system is not compatible with non-Ford aftermarket remote start systems. Use of these systems may result in vehicle starting problems and a loss of security protection.
Note: Metallic objects, electronic devices or a second coded key on the same key chain may cause vehicle starting problems if they are too close to the key when starting the engine. Prevent these objects from touching the coded key while starting the engine. Switch the ignition off, move all objects on the key chain away from the coded key and restart the engine if a problem occurs.
Note: Do not leave a duplicate coded key in the vehicle. Always take your keys and lock all doors when leaving the vehicle.
SecuriLock®
The system is an engine immobilization system. It is designed to help prevent the engine from being started unless a coded key programmed to your vehicle is used. Using the wrong key may prevent the engine from starting. A message may appear in the information display.
If you are unable to start the engine with a correctly coded key, a malfunction has happened and a message may appear in the information display.
Automatic Arming
The vehicle arms immediately after you switch the ignition off.
Automatic Disarming
Switching the ignition on with a coded key disarms the vehicle.
Replacement Keys
Note: Your vehicle comes equipped with two integrated keyhead transmitters or two intelligent access keys.
The integrated keyhead transmitter functions as a programmed ignition key that operates all the locks and starts the vehicle, as well as a remote control.
The intelligent access key functions as a programmed key that operates the driver door lock and activates the intelligent access with push button start system, as well as a remote control.
If your programmed transmitters or standard SecuriLock coded keys (integrated keyhead transmitters only) are lost or stolen and you do not have an extra coded key, you will need to have your vehicle towed to an authorized dealer. You need to erase the key codes from your vehicle and program new coded keys.
Store an extra programmed key away from the vehicle in a safe place to help prevent any inconveniences. See your authorized dealer to purchase additional spare or replacement keys.
Programming a Spare Integrated Keyhead Transmitter
Note: You can program a maximum of eight coded keys to your vehicle. All eight can be integrated keyhead transmitters.
You can program your own integrated keyhead transmitter or standard SecuriLock coded keys to your vehicle. This procedure will program both the engine immobilizer keycode and the remote entry portion of the remote control to your vehicle
Only use integrated keyhead transmitters or standard SecuriLock keys.
68
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Security
You must have two previously programmed coded keys and the new unprogrammed key readily accessible. See your authorized dealer to have the spare key programmed if two previously programmed coded keys are not available.
Read and understand the entire procedure before you begin.
1. Insert the first previously programmed coded key into the ignition.
2. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
3. Switch the ignition off and remove the first coded key from the ignition.
4. After three seconds but within 10 seconds of switching the ignition off, insert the second previously coded key into the ignition.
5. Switch the ignition from off to on. Keep the ignition on for at least three seconds, but no more than 10 seconds.
6. Switch the ignition off and remove the second previously programmed coded key from the ignition.
7. After three seconds but within 10 seconds of switching the ignition off and removing the previously programmed coded key, insert the new unprogrammed key into the ignition.
8. Switch the ignition from off to on. Keep the ignition on for at least six seconds.
9. Remove the newly programmed coded key from the ignition.
If the key has been successfully programmed it will start the engine and operate the remote entry system (if the new key is an integrated keyhead transmitter).
If programming was not successful, wait 10 seconds and repeat Steps 1 through 8. If you are still unsuccessful, take your vehicle to your authorized dealer.
Programming a Spare Intelligent Access Key
See your authorized dealer to have additional keys programmed to your vehicle.
ANTI-THEFT ALARM
The system will warn you of an unauthorized entry to your vehicle. It will be triggered if any door, the luggage compartment or the hood is opened without using the key, remote control or keyless entry keypad.
The direction indicators will flash and the horn will sound if unauthorized entry is attempted while the alarm is armed.
Take all remote controls to an authorized dealer if there is any potential alarm problem with your vehicle.
Arming the Alarm
The alarm is ready to arm when there is not a key in the ignition. Electronically lock the vehicle to arm the alarm.
The message indicator flashes when theft protection is active.
Disarming the Alarm
Disarm the alarm by any of the following actions:
· Unlock the doors or luggage compartment with the remote control or keyless entry keypad.
· Switch the ignition on or start the vehicle.
· Use a key in the driver's door to unlock the vehicle, then switch the ignition on within 12 seconds.
Note: Pressing the panic button on the remote control will stop the horn and signal indicators, but will not disarm the system.
69
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Steering Wheel
ADJUSTING THE STEERING WHEEL
WARNING Do not adjust the steering wheel when your vehicle is moving.
Note: Make sure that you are sitting in the correct position. See Sitting in the Correct Position (page 115).
E259854
1. Unlock the steering column. 2. Adjust the steering wheel to the desired
position.
E259855
3. Lock the steering column.
AUDIO CONTROL
Select the required source on the audio unit. You can operate the following functions with the control: Type One
E187452
A Volume up. B Seek up or next. C Volume down. D Seek down or previous.
70
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Type Two
Steering Wheel
VOICE CONTROL
E201115
A Volume up. B Seek up or next. C Volume down. D Seek down or previous. E Press to select source.
Seek, Next or Previous
Press the seek button to: · Tune the radio to the next or previous
stored preset. · Play the next or the previous track. Press and hold the seek button to: · Tune the radio to the next station up
or down the frequency band. · Seek through a track.
E186744
Press to select or deselect voice control.
CRUISE CONTROL Type One
E144500
See Using Cruise Control (page 180).
71
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Steering Wheel
Type Two
E223551
See Using Adaptive Cruise Control (page 181).
INFORMATION DISPLAY CONTROL
Note: You can use the heated steering wheel only when the engine is running.
Note: The system uses a sensor and is designed to control the temperature of the steering wheel and to prevent it from overheating.
Note: In warm temperatures, the steering wheel quickly reaches its maximum temperature and the system reduces the current to the heating element. This could cause you to think that the system has stopped working but it has not. This is normal.
E188902
See General Information (page 91).
HEATED STEERING WHEEL (If
Equipped)
Switch the heated steering wheel on and off using the touchscreen.
Touch the button to switch the heated steering wheel on and off.
72
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wipers and Washers
WINDSHIELD WIPERS
E270969
Push the lever up or down to operate the windshield wiper.
Intermittent Wipe
E197525
A Single wipe.
B Intermittent wipe.
C Normal wipe.
D High speed wipe.
Note: Fully defrost the windshield before you switch the windshield wipers on.
Note: Make sure that you switch the windshield wipers off before entering a car wash.
Note: If streaks or smears appear on the windshield, clean the windshield and the wiper blades. If that does not resolve the issue, install new wiper blades.
Note: Do not operate the wipers on a dry windshield. This may scratch the glass, damage the wiper blades or cause the wiper motor to burn out. Always use the windshield washers before wiping a dry windshield.
E197526
A Shortest wipe interval. B Intermittent wipe. C Longest wipe interval.
Use the rotary control to adjust the intermittent wipe interval.
Speed Dependent Wipers
When your vehicle speed increases, the interval between wipes decreases.
AUTOWIPERS (If Equipped)
Note: Fully defrost the windshield before you switch the windshield wipers on. Note: Make sure you switch the windshield wipers off before entering a car wash. Note: If streaks or smears appear on the windshield, clean the windshield and the wiper blades. If that does not resolve the issue, install new wiper blades. Note: If you switch autolamps and autowipers on, the headlamps turn on when the windshield wipers continuously operate. Wet or winter driving conditions with ice, snow or salty road mist can cause inconsistent and unexpected wiping or smearing.
73
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wipers and Washers
WINDSHIELD WASHERS
E197526
A High sensitivity.
B On.
C Low sensitivity.
Use the rotary control to adjust the sensitivity of the autowipers. When you select low sensitivity, the wipers operate when the sensor detects a large amount of water on the windshield. When you select high sensitivity, the wipers operate when the sensor detects a small amount of water on the windshield.
Keep the outside of the windshield clean. The rain sensor is very sensitive and the wipers may operate if dirt, mist or insects hit the windshield.
In these conditions, you can do the following: · Lower the sensitivity of the autowipers
to reduce the amount of smearing on the windshield. · Switch to normal or high-speed wipe. · Switch autowipers off.
Autowipers Settings
Autowipers default to on and remain on until you switch it off in the information display. When you switch off autowipers, the wipers operate in intermittent mode.
E197528 E270967
Pull the lever toward you to operate the windshield washers.
When you release the lever, the wipers operate for a short time. When activated, a courtesy wipe occurs a short time after the wipers stop to clear any remaining washer fluid.
Note: You can switch courtesy wipe on or off in the information display See Information Messages (page 95).
Note: Do not operate the washers when the washer reservoir is empty. This could cause the washer pump to overheat.
Front Camera Washer (If Equipped)
Operating the windshield washer also turns on the front camera washer.
REAR WINDOW WIPER AND WASHERS
Note: Make sure you switch the windshield wipers off before entering a car wash.
74
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wipers and Washers
E171615
A Intermittent wipe. B Low speed wipe. C Off. Depending on your vehicle, when you switch on the front wipers and move the gearshift lever to reverse (R), the rear intermittent wipe may turn on. Rear Window Washer
E167407
Push the lever away from you to operate the rear window washer. When you release the lever, wiping continues for a short period of time.
75
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Lighting
GENERAL INFORMATION
Condensation in the Exterior Front Lamps and Rear Lamps
Exterior front lamps and rear lamps have vents to accommodate normal changes in air pressure.
Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a fine mist can form on the interior of the lens. The fine mist eventually clears and exits through the vents during normal operation.
Clearing time may take as long as 48 hours under dry weather conditions.
Examples of acceptable condensation are:
· The presence of a fine mist (no streaks, drip marks or large droplets).
· A fine mist covers less than 50% of the lens.
Examples of unacceptable condensation are:
· A water puddle inside the lamp.
· Streaks, drip marks or large droplets present on the interior of the lens.
If you see any unacceptable condensation, have your vehicle checked by an authorized dealer.
LIGHTING CONTROL
E142449
A Lamps off. B Parking lamps, instrument panel
lamps, license plate lamps and tail lamps. C Headlamps. Headlamp High Beam
E162679
Push the lever away from you to switch the high beam on.
Push the lever forward again or pull the lever toward you to switch the high beams off.
76
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Lighting
Flashing the Headlamp High Beam
E162680
Slightly pull the lever toward you and release it to flash the headlamps.
AUTOLAMPS
WARNING The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the headlamps on in low visibility conditions, for example daytime fog.
The headlamps remain on for a period of time after you switch the ignition off. Use the information display controls to adjust the period of time that the headlamps remain on.
Note: If you switch the autolamps on, you cannot switch the high beams on until the system turns the low beams on.
Windshield Wiper Activated Headlamps
When you switch the autolamps on, the headlamps turn on within 10 seconds of switching the wipers on. They turn off approximately 60 seconds after you switch the windshield wipers off.
The headlamps do not turn on with the wipers:
· During a single wipe.
· When using the windshield washers.
· If the wipers are in intermittent mode.
Note: If you switch the autolamps and the autowipers on, the headlamps turn on when the windshield wipers continuously operate.
INSTRUMENT LIGHTING DIMMER
E142451
When the lighting control is in the autolamps position, the headlamps turn on in low light situations, or when the wipers turn on.
E231828
77
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Lighting
Press repeatedly or press and hold until you reach the desired level.
HEADLAMP EXIT DELAY
After you switch the ignition off, you can switch the headlamps on by pulling the direction indicator lever toward you. You will hear a short tone. The headlamps will switch off automatically after three minutes with any door open or 30 seconds after the last door has been closed. You can cancel this feature by pulling the direction indicator toward you again or switching the ignition on.
DAYTIME RUNNING LAMPS
WARNING
The daytime running lamps system does not activate the rear lamps and may not provide adequate lighting during low visibility driving conditions. Make sure you switch the headlamps on, as appropriate, during all low visibility conditions. Failure to do so may result in a crash.
Type One - Conventional (NonConfigurable)
The daytime running lamps turn on when: 1. Switching the ignition on. 2. The transmission is not in park (P) for
vehicles with automatic transmissions, or releasing the parking brake for vehicles with manual transmissions. 3. The lighting control is in the off, parking lamp or autolamps positions. 4. The headlamps are off.
Type Two - Configurable
Switch the daytime running lamps on or off using the information display. See Information Displays (page 91).
The daytime running lamps turn on when: 1. The lamps are on in the information
display. 2. Switching the ignition on. 3. The transmission is not in park (P) for
vehicles with automatic transmissions, or releasing the parking brake for vehicles with manual transmissions. 4. The lighting control is in the autolamps position. 5. The headlamps are off.
The other lighting control switch positions do not turn on the daytime running lamps.
If the daytime running lamps are off in the information display, the lamps stay off in all switch positions.
AUTOMATIC HIGH BEAM CONTROL (If Equipped)
WARNING
The system does not relieve you of your responsibility to drive with due care and attention. You may need to override the system if it does not turn the high beams on or off.
The system turns on high beams if it is dark enough and no other traffic is present. If it detects an approaching vehicle's headlamps or tail lamps, or street lighting ahead, the system turns off high beams before they can distract other road users. Low beams remain on.
Note: The system may not operate properly if the sensor is blocked. Keep the windshield free from obstruction or damage.
78
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Lighting
Note: The system may not operate properly in cold or inclement conditions. You can switch on the high beams by overriding the system.
Note: If the system detects a blockage, for example bird droppings, bug splatter, snow or ice, the system goes into low beam mode until you clear the blockage. A message may appear in the information display if the camera is blocked.
Note: Using much larger tires or equipping vehicle accessories such as snowplows can modify your vehicle's ride height and degrade automatic high beam control performance.
A camera sensor, centrally mounted behind the windshield of your vehicle, continuously monitors conditions to turn the high beams on and off.
Once the system is active, the high beams turn on if:
· The ambient light level is low enough.
· There is no traffic in front of your vehicle.
· The vehicle speed is greater than approximately 32 mph (51 km/h).
The high beams turn off if:
· The ambient light level is high enough that high beams are not required.
· The system detects an approaching vehicle's headlamps or tail lamps.
· The vehicle speed falls below approximately 27 mph (44 km/h).
· The system detects severe rain, snow or fog.
· The camera is blocked.
Switching the System On and Off
Switch the system on using the information display. See Information Displays (page 91).
E142451
Switch the lighting control to the autolamps position. See Autolamps (page 77). Overriding the System When you switch on the high beams, pushing or pulling the stalk provides a temporary override to low beam. Automatic High Beam Indicator (If
Equipped)
The indicator lamp illuminates to confirm when the system is ready to assist.
FRONT FOG LAMPS (If Equipped)
E142453
Press the control to switch the fog lamps on or off.
79
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Lighting
You can switch the fog lamps on when the lighting control is in any position except Off and the high beams are not on.
DIRECTION INDICATORS
Front Interior Lamps
E162681
Push the lever up or down to use the direction indicators. Note: Tap the lever up or down to make the direction indicators flash three times to indicate a lane change.
INTERIOR LAMPS
The lamps turn on under the following conditions: · You open any door. · You press a remote control button.
E181171
A. Individual lamp. B. Individual lamp. Rear Interior Lamps (If Equipped)
A
E142455
Press the button to switch the lamps on or off.
AMBIENT LIGHTING (If Equipped)
Adjust the ambient lighting using the touchscreen. See your SYNC information.
80
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Windows and Mirrors
POWER WINDOWS
WARNINGS Do not leave children unattended in your vehicle and do not let them play with the power windows. Failure to follow this instruction could result in personal injury. When closing the power windows, verify they are free of obstruction and make sure that children and pets are not in the proximity of the window openings.
Press the control to open the window. Lift the control to close the window.
To reduce wind noise or pulsing noise when just one window is open, slightly open the opposite window.
One-Touch Open (If Equipped)
Fully press the control and release it. Press again or lift it to stop the window.
One-Touch Close (If Equipped)
Fully lift the control and release it. Press again or lift it to stop the window.
Rear Window Lock
Press the control to lock or unlock the rear window controls. It illuminates when you lock the rear window controls.
Bounce-Back (If Equipped)
The window stops and reverses if it detects an obstruction.
Overriding Bounce-Back
WARNING
If you override bounce-back, the window does not reverse if it detects an obstacle. Take care when closing the windows to avoid personal injury or damage to your vehicle.
Proceed as follows to override this protection feature when there is a resistance, for example in winter:
1. Close the window twice until it reaches the point of resistance and let it reverse.
2. Close the window a third time to the point of resistance. You disabled the bounce-back feature and you can now close the window manually. The window goes past the point of resistance and you can fully close it.
Note: If the window does not close, have your vehicle checked as soon as possible.
Resetting Bounce-Back
WARNING
Bounce-back is off until you reset the memory. Take care when closing the windows to avoid personal injury or damage to your vehicle.
If you have disconnected the battery, you must reset the bounce-back memory separately for each window.
1. Lift and hold the switch until the window is fully closed.
2. Release the switch.
3. Lift and hold the switch again for a few seconds.
4. Release the switch.
5. Lift and hold the switch again for a few seconds.
81
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Windows and Mirrors
6. Release the switch. 7. Press and hold the switch until the
window is fully open. 8. Lift and hold the switch until the
window is fully closed. 9. Release the switch. 10. Open the window and then try to
close it using one-touch close. Note: Repeat the procedure if the window does not close when you use one-touch.
Accessory Delay
You can use the window controls for several minutes after switching off the ignition or until opening either front door.
EXTERIOR MIRRORS
Power Exterior Mirrors
WARNING Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death.
A
C
B
E70846
A Left-hand mirror B Off C Right-hand mirror
E70847
Press the arrows to adjust the mirror.
Fold-Away Exterior Mirrors
Push the mirror toward the door window glass. Make sure that you fully engage the mirror in its support when returning it to its original position.
Heated Exterior Mirrors (If Equipped)
See Heated Windows and Mirrors (page 113).
Memory Mirrors (If Equipped)
You can save and recall the mirror positions through the memory function. See Memory Function (page 120).
Signal Indicator Mirrors (If Equipped)
The outer portion of the appropriate mirror housing will blink when you switch on the turn signal.
Puddle Lamps (If Equipped)
The lamps on the bottom part of the mirror housing light when you use your transmitter to unlock the doors or when you open a door.
82
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Windows and Mirrors
Integrated Blind Spot Mirrors (If
Equipped)
WARNING Objects in the mirror are closer than they appear.
Blind spot mirrors have an integrated
C
convex mirror built into the upper outboard
corner of the exterior mirrors. They are
designed to increase your visibility along
the side of your vehicle.
Check the main mirror first before a lane
change, then check the blind spot mirror.
If no vehicles are present in the blind spot mirror and the traffic in the adjacent lane
B
is at a safe distance, signal that you intend
to change lanes. Glance over your shoulder
to verify traffic is clear and carefully
change lanes.
A
E138665
The image of the approaching vehicle is small and near the inboard edge of the main mirror when it is at a distance. The image becomes larger and begins to move outboard across the main mirror as the vehicle approaches (A). The image will transition from the main mirror and begin to appear in the blind spot mirror as the vehicle approaches (B). The vehicle will transition to your peripheral field of view as it leaves the blind spot mirror (C).
Blind Spot Monitor (If Equipped)
See Blind Spot Information System (page 193).
83
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Windows and Mirrors
INTERIOR MIRROR
Manual Dimming Mirror
WARNING
Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death.
Pull the tab below the mirror toward you to reduce the effect of bright light from behind.
Automatic Dimming Mirror(IfEquipped)
WARNING
Do not adjust the mirrors when your vehicle is moving. This could result in the loss of control of your vehicle, serious personal injury or death.
The mirror dims to reduce the effect of bright light from behind. It returns to normal when the bright light from behind is no longer present or if you shift into reverse (R).
Do not block the sensors on the front and back of the mirror.
Note: A rear center passenger or raised rear center head restraint could prevent light from reaching the sensor.
SUN VISORS
E138666
Rotate the sun visor toward the side window and extend it rearward for extra shade. Illuminated Vanity Mirror (If Equipped)
E162197
Lift the cover to switch the lamp on.
MOONROOF (If Equipped)
WARNINGS Do not let children play with the moonroof or leave them unattended in the vehicle. They may seriously hurt themselves.
84
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Windows and Mirrors
WARNINGS When closing the moonroof, you should verify that it is free of obstructions and make sure that children and pets are not in the proximity of the roof opening.
The moonroof and sunscreen controls are located on the overhead console. The moonroof and sunscreen have a one-touch open and close feature. To stop them during one-touch operation, press the control a second time. Opening and Closing the Sunscreen
E138668
Press and release the rear of the control to open the sunscreen. Press and release the front of the control to close the sunscreen. If it is open, the moonroof will automatically close before the sunscreen closes. Opening and Closing the Moonroof
Press and release the rear of the control to open the moonroof. If it is closed, the sunscreen will automatically open before the moonroof opens. The moonroof will stop short of the fully opened position.
Note: This position helps to reduce wind noise or rumbling which may happen with the moonroof fully open. Press and hold the control again to fully open the moonroof.
Press and release the front of the control to close the moonroof.
Bounce-Back
The moonroof will stop automatically while closing. It will reverse some distance if there is an obstacle in the way.
Press and hold the front of the control within two seconds of a bounce-back event to override this function. While bounce-back is active, the closing force increases for each of the next three times that you close the moonroof.
Venting the Moonroof
Press and release the front of the control to vent the moonroof. Press and release the rear of the control to close the moonroof.
Note: When you vent the moonroof it will rise to 1.57 in (4 cm) and then lower slightly. This is normal. You cannot stop the moonroof in the higher position.
E138669 85
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
GAUGES
Instrument Cluster
E171213
A Information display B Speedometer C Engine coolant temperature
gauge D Fuel gauge E Tachometer
Information Display
Compass (If Equipped) Displays the vehicle's heading direction. To calibrate and set the compass zone use the information display menu. See Information Displays (page 91).
Use the diagram to determine your magnetic zone.
32 1
15
4
14
13
5
12
E142800
6
7 8 9 1011
86
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Instrument Cluster
Odometer
Located in the bottom of the information display, it registers the accumulated distance your vehicle has traveled.
Outside Air Temperature
Shows the outside air temperature.
Trip Computer
See Trip Computer (page 94).
Vehicle Settings and Personalization
See General Information (page 91).
Engine Coolant Temperature Gauge
WARNING Never remove the coolant reservoir cap when the engine is running or hot.
At normal operating temperature, the needle will remain in the center section. Note: Do not restart the engine until the cause of overheating has been resolved. If the needle enters the red section, the engine is overheating. Stop the engine, switch the ignition off and determine the cause once the engine has cooled down. See Engine Coolant Check (page 248).
Fuel Gauge
Note: The fuel gauge level may vary slightly when your vehicle is moving or when driving on a slope. Switch the ignition on. The fuel gauge will indicate approximately how much fuel is in the fuel tank. The arrow next to the fuel pump symbol shows the fuel filler door side of your vehicle.
The needle will move toward full when you refuel your vehicle. If the needle still points to empty after adding fuel, have your vehicle repaired.
After refueling the needle may not always return to exactly the same position. This is normal.
Note: It may take a short time for the needle to reach full after refueling and driving. This is normal and may be due to the slope of pavement at the service station.
Note: The fuel pumped into the tank may differ slightly from the fuel gauge. This is normal and may be due to the slope of pavement at the service station.
Note: If the service station nozzle shuts off before the tank is full, complete refueling at a different pump.
Low Fuel Level Reminder
A low fuel level reminder displays and sounds when the distance to empty reaches 50 mi (80 km) to empty for MyKey, and at 35 mi (60 km), 25 mi (40 km), 10 mi (20 km) and 0 mi (0 km) for all vehicle keys.
WARNING LAMPS AND INDICATORS
The following warning lamps and indicators alert you to a vehicle condition that may become serious. Some lamps illuminate when you start your vehicle to make sure they work. If any lamps remain on after starting your vehicle, refer to the respective system warning lamp for further information.
Note: Some warning indicators appear in the information display and operate the same as a warning lamp but do not illuminate when you start your vehicle.
87
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Instrument Cluster
Adaptive Cruise Control (If Equipped)
The speed control system indicator light changes color to E144524 indicate what mode the system is in. See Using Adaptive Cruise Control (page 181).
On (white light): Illuminates when you switch on the adaptive cruise control system. Turns off when you switch off the speed control system.
Engaged (green light): Illuminates when you engage the adaptive cruise control system. Turns off when you disengage the speed control system.
Airbag - Front
If it fails to illuminate when you
start your vehicle, continues to
E67017
flash or remains on, it indicates
a malfunction. Have the system checked
by your authorized dealer.
Anti-Lock Braking System
If it illuminates when you are driving, this indicates a malfunction. You will continue to have the normal braking system (without ABS) unless the brake system warning lamp is also illuminated. Have the system checked by your authorized dealer.
Auto Start-Stop (If Equipped)
It illuminates to inform you when the engine shuts down or in conjunction with a message.
Battery
If it illuminates while driving, it indicates a malfunction. Switch off all unnecessary electrical equipment and have the system checked by your authorized dealer immediately.
Blind Spot Monitor (If Equipped)
It will illuminate when you switch this feature off or in conjunction E124823 with a message. See Blind Spot Information System (page 193). See Information Messages (page 95).
Brake System
WARNING
Driving your vehicle with the warning lamp on is dangerous. A significant decrease in braking performance may occur. It may take you longer to stop your vehicle. Have your vehicle checked as soon as possible. Driving extended distances with the parking brake engaged can cause brake failure and the risk of personal injury.
E138644
It will illuminate when you engage the parking brake with the ignition on.
If it illuminates when you are driving, check that the parking brake is not engaged. If the parking brake is not engaged, this indicates low brake fluid level or a brake system malfunction. Have the system checked immediately by your authorized dealer.
Cruise Control (If Equipped)
E71340
It will illuminate when you switch this feature on. See Using Cruise Control (page 180).
Direction Indicator
Illuminates when the left or right turn signal or the hazard warning flasher is turned on. If the indicators stay on or flash faster, check for a burned out bulb. See Changing a Bulb (page 258).
88
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Instrument Cluster
Electric Park Brake
Illuminates or flashes when the
E146190
electric parking brake has a malfunction. See Electric
Parking Brake (page 160).
Engine Oil
If it illuminates with the engine running or when you are driving, this indicates a malfunction. Stop your vehicle as soon as it is safe to do so and switch the engine off. Check the engine oil level. See Engine Oil Check (page 246).
Note: Do not resume your journey if it illuminates despite the level being correct. Have the system checked by your authorized dealer immediately.
Fasten Seatbelt
It will illuminate and a chime will
sound to remind you to fasten
E71880
your seatbelt. See Seatbelt
Reminder (page 34).
Fog Lamps - Front (If Equipped)
It will illuminate when you switch the front fog lamps on.
High Beam
It will illuminate when you switch the high beam headlamps on. It will flash when you use the headlamp flasher.
Information (If Equipped)
It will illuminate when a new message is stored in the information display. It will be red or amber in color depending on the severity of the message and will remain on until the cause of the message has been rectified. See Information Messages (page 95).
Low Fuel Level
It will illuminate when the fuel level is low or the fuel tank is nearly empty. Refuel as soon as possible.
Low Tire Pressure Warning
It illuminates when your tire pressure is low. If the lamp remains on with the engine running or when driving, check your tire pressure as soon as possible.
It will also illuminate momentarily when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked by your authorized dealer.
Parking Lamps
It will illuminate when you switch the parking lamps on.
Service Engine Soon
If it illuminates when the engine is running this indicates a malfunction. The On Board Diagnostics system has detected a malfunction of the vehicle emission control system.
89
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Instrument Cluster
If it flashes, engine misfire may be occurring. Increased exhaust gas temperatures could damage the catalytic converter or other vehicle components. Drive in a moderate fashion (avoid heavy acceleration and deceleration) and have your vehicle immediately serviced.
It illuminates when you switch the ignition on prior to engine start to check the bulb and to indicate whether your vehicle is ready for Inspection and Maintenance (I/M) testing.
Normally, it illuminates until the engine is cranked and automatically turns off if no malfunctions are present. However, if after 15 seconds it flashes eight times, this indicates that your vehicle is not ready for Inspection and Maintenance (I/M) testing.
See Emission Law (page 146).
Traction and Stability Control
It will flash when the system is active. If it remains illuminated E138639 or does not illuminate when you switch the ignition on, this indicates a malfunction. During a malfunction the system will switch off. Have the system checked by your authorized dealer immediately.
Traction and Stability Control Off
It illuminates when you switch the system off. It will go out E130458 when you switch the system back on or when you switch the ignition off.
AUDIBLE WARNINGS AND INDICATORS
Key in Ignition Warning Chime (If
Equipped)
Sounds when you open the driver's door and you have left the key in the ignition.
Engine On Warning Chime
A warning chime will sound when any door is opened if the vehicle exceeds a relatively low speed.
Keyless Warning Alert (If Equipped)
Sounds the horn twice when you exit the vehicle and the keyless vehicle is in RUN, indicating the vehicle is still on.
Headlamps On Warning Chime
Sounds when you remove the key from the ignition and open the driver's door and you have left the headlamps or parking lamps on.
Parking Brake On Warning Chime
Sounds when you have left the parking brake on and drive your vehicle. If the warning chime remains on after you have released the parking brake, have the system checked by your authorized dealer immediately.
Automatic Transmission Warning Chime
Sounds when you have not moved the transmission selector lever to position P. A message will be shown in the display.
90
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
GENERAL INFORMATION
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
You can control various systems on your vehicle using the information display controls on the steering wheel. The information display shows the corresponding information.
Information Display Controls
· Press the up or down arrow button to scroll through and highlight the options within a menu.
· Press the right arrow button to enter a sub-menu.
· Press the left arrow button to exit a menu.
· Press and hold the left arrow button at any time to return to the main menu display (escape button).
· Press the OK button to choose and confirm settings or messages. The OK button may also be used to reset some Trip values.
This icon gives you the ability to switch a feature on or off. A E204495 check in the box indicates the feature is enabled, and unchecked indicates the feature is disabled.
Menu Structure - Information Display
All Vehicles
You can access the menu using the information display control.
Note: Some options may appear slightly different or not at all if the items are optional.
E184819
91
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
1
Trip 1 and 2
All Value - Distance to E, Trip Odometer, Instantaneous Fuel and Average Fuel
Speed
Trip Odometer
Average Fuel
Ford EcoMode
Anticipation
Speed
Inst Fuel Econ
Distance to E
Trip Timer
Option to select for navigation display. 1 See Trip Computer (page 94).
Seatbelt Auto StartStop Driver Alert Intelligent 4WD MyKey MyKey Info System Check
Information
Driver Assist
Traction Ctrl Blindspot Collision Warn
Settings
Sensitivity Dist. Indication
Select Your Setting
92
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Vehicle
Information Displays
Settings
Cross Traffic
Cruise Control
Select Your Setting
Driver Alert
Tire Monitor
Lane Keeping
Mode
Select Your Setting
Intensity
Auto Engine Off
Alarm
Select Your Setting
Ask on Exit
Compass
Display
Chimes
Park Slot
Information
Warning
Easy Entry/Exit
Lighting
Rain Light
Dimming
Select Your Setting
Hdlamp Delay
DRL
Oil Life Reset
Remote Start
System
Climate Control Heater - A/C
Heated Wheel
Front Defrost
Rear Defrost
Driver Seat
Passengr Seat
Duration
Select Your Setting
93
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
MyKey Display
Settings
Quiet Start
Restore Default
Wipers
Courtesy Wipe
Rain Sensing
Create MyKey
Hold OK to Create MyKey
Traction Ctrl
Select Your Setting
Max Speed
Speed Warning
Volume Limiter
Do Not Disturb
Select Your Setting
Clear MyKeys
Hold OK to Clear All MyKeys
Navigation info
Language
Select Your Setting
Vehicle graphic
Distance
Select Your Setting
Temperature
System Check
All active warnings will display first if applicable. The system check menu may appear different based upon equipment options and current vehicle status. Use the up/down arrow buttons to scroll through the list.
TRIP COMPUTER
Resetting the Trip Computer
Press and hold OK on the current screen to reset the respective trip distance, time, average fuel and average speed information.
Distance to E
Indicates the approximate distance the vehicle will travel on the fuel remaining in the tank. Changes in driving pattern may cause the value to vary.
Trip Odometer
Registers the distance traveled of individual journeys.
Trip Timer
Registers the time of individual journeys.
Instantaneous Fuel (If Equipped)
Shows your instantaneous fuel usage.
94
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Average Fuel Indicates the average fuel consumption since the function was last reset. Digital Speedo Shows a digital display of your vehicle speed. All Value (If Equipped) Indicates all the respective remaining fuel, distance, instantaneous fuel and average fuel information.
INFORMATION MESSAGES
Note: Depending on your vehicle options and instrument cluster type, not all of the messages display or are available. Additionally, the information display may abbreviate or shorten certain messages.
Airbag
E184814
Press the OK button to acknowledge and remove some messages from the information display. The information display automatically removes other messages after a short time.
You need to confirm certain messages before you can access the menus.
Message Indicator (If Equipped)
The message indicator illuminates to supplement some messages. It is red or amber depending on the severity of the message and remains on until you or your authorized dealer have fixed the vehicle concern.
A system specific symbol with a message indicator may supplement some messages.
Message Airbag fault Service now
Message Indicator
Amber
Action
Displays when the system requires service due to a malfunction. Contact your authorized dealer.
95
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Alarm
Message
Alarm Activated Check Vehicle
Alarm fault Service required
Message Indicator
Amber
-
Action
Displays when the alarm has been triggered due to unauthorized entry. See Anti-Theft
Alarm (page 69).
Displays when the system requires service due to a malfunction. Contact your authorized dealer.
Automatic Engine Shutdown
Message
Engine Shut Off For Fuel Economy
Engine Shuts Off in {seconds to shut off:#0}
Seconds Press Ok to Override
Message Indicator
-
-
Action
Displays when the engine has shut off to help increase fuel economy.
Displays when the engine is getting ready to shut off. You can press OK on the left steering
wheel button to override the shut down.
96
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Auto Start-Stop
Message
Auto StartStop Switch ignition off
Auto StartStop malfunction Service
required
Auto StartStop Press a Pedal to Start Engine
Auto StartStop Select Neutral To Start Engine Auto StartStop Manual
Restart Required
Message Indicator
Red
Action
Switch the ignition off before leaving your vehicle if the system has shut down the engine.
See Auto-Start-Stop (page 136).
Amber
Have your vehicle checked by an authorized dealer.
The engine needs to be restarted, press the
-
clutch pedal to start. See Auto-Start-Stop
(page 136).
-
Select neutral for the system to restart the engine. See Auto-Start-Stop (page 136).
-
The system is not functioning. A manual restart is required.
Battery and Charging System
Message
Electrical System Overvoltage Stop Safely
Battery Low See Manual
Message Indicator
Red
Amber
Action
Stop your vehicle as soon as it is safe to do so and switch off the ignition. Contact your authorized dealer.
Displays to warn of a low battery condition. Turn off all unneeded electrical accessories.
Contact your authorized dealer.
97
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Blind Spot Information and Cross Traffic Alert System
Message
Blindspot Low visibility See manual
BLIS: X sensor fault Service required
Blindspot Not Available Trailer Attached
Cross Traffic Vehicle coming from X
Cross Traffic Sensor blocked See manual
Cross Traffic fault Service required
Cross traffic disabled Trailer attached
Message Indicator
Amber
Amber Amber Amber Amber
Amber -
Action
Displayed when the blind spot information system and cross traffic alert system sensors
are blocked. See Blind Spot Information System (page 193).
Displayed when a fault with the system has occurred. Contact your authorized dealer as
soon as possible.
Displayed when the system is not available due to trailer use. See Blind Spot Information System (page 193).
Displayed when the system detects a vehicle. See Cross Traffic Alert (page 194).
Displayed when the blind spot information system and cross traffic alert system sensors are blocked. See Cross Traffic Alert (page
194).
Displays when the system requires service due to a malfunction. Contact your authorized dealer.
Displayed when the system is not available due to trailer use. See Cross Traffic Alert (page
194).
98
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Collision Warning and Adaptive Cruise Control (ACC)
Message
Indicator
Action
Front radar sensor blocked See manual
Amber
You have a blocked sensor due to bad weather, ice, mud or water in front of the radar sensor. You
can typically clean the sensor to resolve. See Using Adaptive Cruise Control (page 181).
Adaptive Cruise Not Available
Amber
A condition exists that the system cannot function properly. See Using Adaptive Cruise Control
(page 181).
Collision Warning Fault Amber A fault with the system has occurred. Contact an
Service Required
authorized dealer as soon as possible.
Collision Warning Not Available
Amber
A condition exists that the system cannot function properly. See Collision Warning System (page
197).
Collision Warning Fault Amber A fault with the system has occurred. Contact an
Service Required
authorized dealer as soon as possible.
Doors
Message X door open
Trunk Ajar
Hood Ajar
Message Indicator
Red -
Red -
Red -
Action
Displays when the door(s) listed is not completely closed and the vehicle is moving.
Displays when the door(s) listed is not completely closed.
Displays when the luggage compartment is not completely closed and the vehicle is moving.
Displays when the luggage compartment is not completely closed.
Displays when the hood is not completely closed and the vehicle is moving.
Displays when the hood is not completely closed.
99
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Engine
Message Engine fault Service now
High Engine Temperature Stop Safely
Power Reduced to Lower Engine Temp
Message Indicator
Amber Red
-
Action
Engine service is required. Contact your authorized dealer.
Displays when the engine temperature is too high. Stop the vehicle in a safe place and allow
to engine to cool. If the problem persists, contact your authorized dealer. See Engine
Coolant Check (page 248).
Displays when the engine has reduced power in order to help reduce high coolant temper-
ature.
Four-Wheel Drive
Message 4WD fault Service
required
4WD Off
4WD temporarily disabled
4WD restored
Message Indicator
Amber
Amber
Amber -
Action
The system is not functioning correctly and defaulted to front-wheel drive. See your
authorized dealer. See Using Four-Wheel Drive (page 154).
Displays when the system disables automatically and enters front-wheel drive only mode to protect driveline components. See Using Four-
Wheel Drive (page 154).
The system has overheated and defaulted to front-wheel drive. See Using Four-Wheel
Drive (page 154).
Displays when system operation has been restored. See Using Four-Wheel Drive (page
154).
100
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Hill Start Assist
Message
Hill Start Assist Not Available
Message Indicator
Amber
Action
Displays when hill start assist is not available. Contact your authorized dealer. See Hill Start
Assist (page 162).
Keyless Vehicle
Message
Ford KeyFree Key inside vehicle
Ford KeyFree No key detected
Switch ign. off Press ENGINE Start/Stop
button Press brake to start
Ford KeyFree Key not inside car
Key Battery Low Replace Soon
Message Indicator
Amber -
Red
Red
-
Action
Displays to remind you that the key is in the trunk. See Keyless Starting (page 130).
Displayed if the key is not detected by the system. See Keyless Starting (page 130).
Displayed as a reminder to turn off the vehicle. See Keyless Starting (page 130).
Displayed as a reminder to press the brake while starting the vehicle.
Displayed when a valid key is not detected within the vehicle. See Keyless Starting (page
130).
Displays when the key battery is low. Change the battery as soon as possible. See Remote
Control (page 47).
101
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Lighting
Message
Brake Lamp Bulb Fault
Low Beam Bulb Fault
Headlamp fault Service required
Message Indicator
-
-
Amber
Action
Displays when the brake lamp bulb has burned out. Contact your authorized dealer.
Displays when the low beam headlamp bulb has burned out. Contact your authorized dealer.
Displays when an electrical system problem occurs with the headlamp system. Contact your
authorized dealer.
Maintenance
Message Engine oil change due
Brake fluid level low Service now
Message Indicator
-
Red
Action
Displays when the engine oil life is depleted and requires a change. See Engine Oil Check (page 246).
Indicates the brake fluid level is low and the brake system should be inspected immediately.
See Brake Fluid Check (page 252).
MyKey
Message
MyKey active Drive Safely
MyKey Speed Limited to XX MPH/km/h
MyKey Vehicle Near Top Speed
MyKey Vehicle at Top Speed
Message Indicator
Amber
Amber
Action
Displays when MyKey is active.
Displays when starting the vehicle and MyKey is in use and the MyKey speed limit is on.
Displays when a MyKey is in use and the MyKey speed limit is on and the vehicle speed is approaching 80 mph (130 km/h).
Displays when a MyKey is in use and the MyKey speed limit is reached.
102
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Message
MyKey Check Speed Drive Safely
MyKey Buckle Up to Unmute Audio
MyKey Park aid cannot be deactivated
Key is Already a MyKey
Hold key next to symbol on steering column
MyKey ESC cannot be deactivated
Message Indicator
-
Action
Displays when MyKey is active.
Displays when a MyKey is in use and seatbelt reminder is activated.
Displays when a MyKey is in use and park aid is activated.
Displays when trying to create a MyKey with a key already designated as a MyKey.
Displays when you are programming a MyKey.
Displays when you are programming a MyKey.
Park Aid
Message
Parking aid malfunction Service required
Message Indicator
Amber
Action
Displays when the system has detected a condition that requires service. Contact your authorized dealer. See Principle of Operation
(page 167).
Park Brake
Message Park brake applied
Message Indicator
Red
Action
Displays when the parking brake is set, the engine is running and the vehicle is driven more than 3 mph (5 km/h). If the warning stays on after the parking brake is released, contact your
authorized dealer.
103
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Power Steering
Message
Steering loss Stop safely
Steering assist fault Service required
Steering fault Service now
Message Indicator
Red
Amber
Amber
Action
The power steering system is not working. Stop the vehicle a safe place. Contact your author-
ized dealer.
The power steering system is not working. Stop the vehicle a safe place. Contact your author-
ized dealer.
The power steering system has detected a condition within the power steering system or passive entry or passive start system requires
service. Contact your authorized dealer.
Remote Start
Message
Remote Start Active
Press Brake and ENGINE Start/Stop
Message Indicator
Amber
Amber
Action
Displays as a reminder that the engine is running after a remote start.
Displays as a reminder to apply the brake and press the Start/Stop button to start your engine
when you have used the remote start.
Starting System
Message Press brake to start Cranking time exceeded
Message Indicator
-
-
Action
Displays when starting the vehicle as a reminder to apply the brake.
Displays when the vehicle fails to start.
104
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Tire Pressure Monitoring System
Message Tire Pressure Low
Tire Pressure Monitor Fault
Tire Pressure Sensor Fault
Message Indicator
Amber
Amber
Amber
Action
Displays when one or more tires on your vehicle have low tire pressure. See Tire Pressure Monitoring System (page 290).
Displays when the tire pressure monitoring system is malfunctioning. If the warning stays
on or continues to come on, contact your authorized dealer. See Tire Pressure Monit-
oring System (page 290).
Displayed when a tire pressure sensor is malfunctioning, or your spare tire is in use. If the
warning stays on or continues to come on, contact your authorized dealer as soon as possible. See Tire Pressure Monitoring
System (page 290).
Traction Control
Message Traction Control Off
Message Indicator
-
Action
Displays when the traction control system has been switched off. See Using Traction Control (page 164).
Trailer
Message
Trailer Sway Reduce Speed
Message Indicator
-
Action
Displays when the trailer sway control has detected a trailer sway. See Trailer Sway
Control (page 208).
105
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Information Displays
Transmission
Message
Transmission malfunction Service now
Transmission Over Temperature Stop
Safely
Transmission Service Required
Transmission Hot Stop or Speed Up
Transmission Hot Wait <XX> mins
Transmission not in Park Select P
Press brake to unlock gearshift lever
Gearshift lever unlocked
Message Indicator
Amber
Amber -
Action
See your authorized dealer.
The transmission is overheating and needs to cool. Stop in a safe place as soon as it's possible. See your authorized dealer.
Transmission is getting hot. Stop to let it cool or speed up.
Transmission is hot. Wait as needed to let it cool.
Displays as a reminder to shift into park.
Displays to request the operator to apply the brake as needed by the transmission.
Displays when the transmission shift lever is unlocked and free to select gears.
106
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Climate Control
MANUAL CLIMATE CONTROL (If Equipped)
E222397
A Fan speed control: Adjusts the volume of air circulated in the vehicle.
B A/C: Press to switch the air conditioning on or off. Use A/C with recirculated air to improve cooling performance and efficiency.
C Air distribution control: Press to switch air flow from the windshield, instrument panel, or footwell vents on or off. You can distribute air through any combination of these vents.
Note: At least one of these buttons illuminates on when the system is on.
D Heated rear window: Press to switch the heated rear window on and off. See Heated Windows and Mirrors (page 113).
E Temperature control: Adjusts the temperature of the air circulated in your vehicle.
F MAX Defrost: Turn to the right to switch on defrost. Air flows through the windshield vents and the fan adjusts to the highest speed. You can also use this setting to defog and clear the windshield of a thin covering of ice. The heated rear window also turns on when you select maximum defrost.
Note: To prevent window fogging, you cannot select recirculated air when maximum defrost is on.
G MAX A/C: Turn to the left for maximum cooling. Recirculated air flows through the instrument panel vents and the air conditioning turns on.
107
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Climate Control
Note: In certain conditions (for example, maximum defrost), the air conditioning compressor may continue to operate even though you switch off the air conditioning.
H Recirculated air: Press to switch between outside air and recirculated air. The air currently in the passenger compartment recirculates. This may reduce the time needed to cool the interior (when used with A/C) and reduce unwanted odors from entering your vehicle.
Note: Recirculated air may turn off (or prevent you from switching on) in all air flow modes except MAX A/C to reduce the risk of fogging. Recirculation may also turn on and off in Panel or Panel/Floor air flow modes during hot weather in order to improve cooling efficiency.
I Heated seats: Press to switch the heated seats on and off. See Heated Seats (page 122).
J Power: Press to switch the system on and off. When the system is off, it prevents outside air from entering the vehicle.
AUTOMATIC CLIMATE CONTROL
E222398
108
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Climate Control
A AUTO: Press to switch on automatic operation. Adjust to select the desired temperature. Fan speed, air distribution, air conditioning operation, and outside or recirculated air adjust to heat or cool the vehicle to maintain the desired temperature.
B Fan speed control: Adjusts the volume of air circulated in the vehicle.
C Climate control display: Shows the temperature settings and fan speed.
D Air distribution control: Press to switch air flow from the windshield, instrument panel, or footwell vents on or off. You can distribute air through any combination of these vents.
E Heated rear window: Press to switch the heated rear window on and off. See Heated Windows and Mirrors (page 113).
F A/C: Press to switch the air conditioning on or off. Use A/C with recirculated air to improve cooling performance and efficiency.
Note: In certain conditions, for example, maximum defrost, the air conditioning compressor may continue to operate even though you switch off the air conditioning.
G Passenger temperature control: Adjusts the temperature setting on the passenger side.
H Recirculated air: Press to switch between outside air and recirculated air. The air currently in the passenger compartment recirculates. This may reduce the time needed to cool the interior, when used with A/C, and reduce unwanted odors from entering your vehicle.
Note: Recirculated air may turn off, or prevent you from switching on, in all air flow modes except MAX A/C to reduce the risk of fogging. Recirculation may also turn on and off in Panel or Panel/Floor air flow modes during hot weather to improve cooling efficiency.
I Heated seats: Press to switch the heated seats on and off. See Heated Seats (page 122).
J MAX A/C: Press for maximum cooling. The driver and passenger settings set to LO, recirculated air flows through the instrument panel vents, air conditioning turns on and the fan adjusts to the highest speed.
K MAX Defrost: Press to switch on defrost. The driver and passenger settings set to HI, air flows through the windshield vents, and the fan adjusts to the highest speed. You can also use this setting to defog and clear the windshield of a thin covering of ice. The heated rear window also turns on when you select maximum defrost.
Note: To prevent window fogging, you cannot select recirculated air when maximum defrost is on.
109
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Climate Control
L Power: Press to switch the system on and off. When the system is off, it prevents outside air from entering the vehicle.
M Driver temperature control: Adjusts the temperature setting on the driver side. This control also adjusts the passenger side temperature when you switch off dual zone mode.
Single Zone Temperature Control
In this mode, the climate control system links the temperature settings for both the driver side and passenger side. If you adjust the setting using the rotary control on the driver side, the system adjusts the passenger temperature to the same setting.
Dual Zone Temperature Control
Select a temperature for the passenger side using the rotary control on the passenger side. Single zone temperature control automatically turns off. The temperature on the driver side remains unchanged. You can now adjust the driver and passenger side temperatures independently. The display shows the temperature settings for each side.
You can switch off dual zone mode by pressing and holding AUTO for more than two seconds.
Switching Back to Single Zone Temperature Control
Press and hold AUTO. The passenger side temperature adjusts to the driver side temperature setting.
Smart Zone (If Equipped)
If you were previously in dual zone operation and there is not an occupant in the front passenger seat, the climate control system may default to single zone to improve fuel economy. When this occurs, dual zone turns off and the passenger set point changes to match the driver set point.
Adjust the passenger set point normally if you desire dual zone operation without a passenger present. The system remains in dual zone operation until you switch the vehicle off.
You can disable or re-enable the Smart Zone feature by pressing and holding AUTO for more than four seconds. Both set point displays begin flashing to signify when the feature disables. The system returns to previous state after you release AUTO.
To re-enable the Smart Zone feature, press and hold AUTO for more than four seconds. Only the driver set point display begins flashing to signify when you re-enable the feature. The climate control system returns to the previous state after you release AUTO.
HINTS ON CONTROLLING THE INTERIOR CLIMATE
General Hints
Note: Prolonged use of recirculated air may cause the windows to fog up.
Note: You may feel a small amount of air from the footwell air vents regardless of the air distribution setting.
Note: To reduce humidity build-up inside your vehicle, do not drive with the system switched off or with recirculated air always switched on.
110
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Climate Control
Note: Do not place objects under the front seats as this may interfere with the airflow to the rear seats. Note: Remove any snow, ice or leaves from the air intake area at the base of the windshield. Note: To improve the time to reach a comfortable temperature in hot weather, drive with the windows open until you feel cold air through the air vents.
Manual Climate Control Note: To reduce fogging of the windshield during humid weather, adjust the air distribution control to the windshield air vents position.
Quickly Heating the Interior
Automatic Climate Control
Note: Adjusting the settings when your vehicle interior is extremely hot or cold is not necessary. The system automatically adjusts to heat or cool the interior to your selected temperature as quickly as possible. For the system to function efficiently, the instrument panel and side air vents should be fully open.
Note: If you select AUTO during cold temperatures, the system directs airflow to the windshield and side window vents. In addition, the fan may run at a slower speed until the engine warms up.
Note: If you select AUTO during hot temperatures and the inside of the vehicle is hot, the system automatically uses recirculated air to maximize interior cooling. Fan speed may also reduce until the air cools.
Manual climate control
1 Adjust the fan speed to the highest setting.
2 Adjust the temperature control to the full heat setting.
3 Direct air to the footwell using the air distribution buttons.
Automatic climate control Press AUTO.
Adjust the temperature control to the desired setting.
111
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Climate Control
Recommended Settings for Heating
Manual climate control 1 Adjust the fan speed to the center
setting. 2 Adjust the temperature control to the
midway point of the hot settings.
3 Direct air to the footwell using the air distribution buttons.
Automatic climate control
Press AUTO.
Adjust the temperature control to the desired setting. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.
Quickly Cooling the Interior
Manual climate control
1 Select MAX A/C.
2 Drive with the windows open until you feel cold air through the air vents.
Automatic climate control Select MAX A/C.
Recommended Settings for Cooling
Manual climate control
Automatic climate control
1 Adjust the fan speed to the center setting.
Press AUTO.
2 Adjust the temperature control to the midway point of the cold settings.
Adjust the temperature control to the desired setting. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.
3 Direct air to the instrument panel using the air distribution buttons.
112
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Climate Control
Defogging the Side Windows in Cold Weather
Manual climate control
Automatic climate control
1 Direct air to the windshield using the air Press the defrost button. distribution buttons.
2 Press A/C.
Adjust the temperature control to the desired setting. Use 72°F (22°C) as a starting point, then adjust the setting as necessary.
3 Adjust the temperature control to the desired setting.
4 Adjust the fan speed to the highest setting.
HEATED WINDOWS AND MIRRORS
Note: Make sure the vehicle is running before operating the heated windows.
Heated Rear Window
Press the button to clear the
E72507
heated rear window of thin ice and fog. The heated rear
window automatically turns off after a
short period of time. Press the button
again to switch it off.
Note: Do not use razor blades or other sharp objects to clean or remove decals from the inside of the heated rear window. The vehicle warranty does not cover damage caused to the heated rear window grid lines.
Heated Exterior Mirrors (If Equipped)
When you switch the heated rear window on, the heated exterior mirrors automatically turn on.
Note: Do not remove ice from the mirrors with a scraper or adjust the mirror glass when it is frozen in place.
Note: Do not clean the mirror housing or glass with harsh abrasives, fuel or other petroleum-based cleaning products.
Windshield Wiper De-icer (If Equipped)
When you switch the heated rear window on, the windshield wiper de-icer automatically turns on.
CABIN AIR FILTER
Your vehicle is equipped with a cabin air filter, which gives you and your passengers the following benefits: · It improves your driving comfort by
reducing particle concentration. · It improves the interior compartment
cleanliness. · It protects the climate control
components from particle deposits.
You can locate the cabin air filter behind the glove box.
113
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Climate Control
Note: Make sure you have a cabin air filter installed at all times. This prevents foreign objects from entering the system. Running the system without a filter in place could result in degradation or damage to the system.
Replace the filter at regular intervals. See Scheduled Maintenance (page 455).
For additional cabin air filter information, or to replace the filter, see an authorized dealer.
REMOTE START (If Equipped)
The system adjusts the interior temperature depending on your chosen settings during remote start.
You cannot adjust the climate control setting during remote start operation. When you switch the ignition on, the climate control system returns to the previous settings. You can now make adjustments.
You need to switch on certain vehicle-dependent features, such as:
· Heated seats.
· Heated steering wheel.
· Heated mirrors.
· Heated rear window.
You can adjust the default remote start settings using the information display controls.
Automatic Settings
You can set the system to operate in AUTO mode through the information display. The system sets the interior temperature to 72°F (22°C).
In hot weather, the system is set to 72°F (22°C). The cooled seats are set to high (if available, and selected to AUTO in the information display).
In cold weather, the system is set to 72°F (22°C). The heated rear window and heated mirrors automatically turn on.
Previous Settings
You can set the system to operate using your previous settings prior to switching the vehicle off through the information display. See Information Displays (page 91).
114
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seats
SITTING IN THE CORRECT POSITION
WARNINGS Sitting improperly, out of position or with the seatback reclined too far can take weight off the seat cushion and affect the decision of the passenger sensing system, resulting in serious injury or death in the event of a crash. Always sit upright against your seat back, with your feet on the floor. Do not recline the seatback as this can cause the occupant to slide under the safety belt, resulting in serious injury in the event of a crash. Do not place objects higher than the seatback to reduce the risk of serious injury in the event of a crash or during heavy braking.
E68595
When you use them properly, the seat, head restraint, safety belt and airbags will provide optimum protection in the event of a crash.
We recommend that you follow these guidelines:
· Sit in an upright position with the base of your spine as far back as possible.
· Do not recline the seatback more than 30 degrees.
· Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable.
· Keep sufficient distance between yourself and the steering wheel. We recommend a minimum of 10 in (25 cm) between your breastbone and the airbag cover.
· Hold the steering wheel with your arms slightly bent.
· Bend your legs slightly so that you can press the pedals fully.
· Position the shoulder strap of the safety belt over the center of your shoulder and position the lap strap tightly across your hips.
Make sure that your driving position is comfortable and that you can maintain full control of your vehicle.
HEAD RESTRAINTS
WARNINGS
Fully adjust the head restraint before you sit in or operate your vehicle. This will help minimize the risk of neck injury in the event of a crash. Do not adjust the head restraint when your vehicle is moving.
The head restraint is a safety device. Whenever possible it should be installed and properly adjusted when the seat is occupied. Failure to adjust the head restraint properly could reduce its effectiveness during certain impacts.
115
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seats
WARNINGS
Adjust the head restraints for all passengers before you drive your vehicle. This will help minimize the risk of neck injury in the event of a crash. Do not adjust the head restraints when your vehicle is moving.
Note: Adjust the seatback to an upright driving position before adjusting the head restraint. Adjust the head restraint so that the top of it is level with the top of your head and as far forward as possible. Make sure that you remain comfortable. If you are extremely tall, adjust the head restraint to its highest position.
Front seat head restraint
The head restraints consist of:
A An energy absorbing head restraint.
B Two steel stems. C Guide sleeve adjust and unlock
button. D Guide sleeve unlock and remove
button. E Fold button
Rear center head restraint
E138642
Rear seat outboard head restraints
E138643
E187325
The rear center head restraint consists of:
A An energy absorbing head restraint.
B Two steel stems. C Guide sleeve unlock and remove
button.
Adjusting the Head Restraint
Raising the Head Restraint Pull the head restraint up.
Lowering the Head Restraint 1. Press and hold button C. 2. Push the head restraint down.
116
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seats
Removing the Head Restraint
1. Pull the head restraint up until it reaches its highest position.
2. Press and hold buttons C and D. 3. Pull the head restraint up.
Installing the Head Restraint
Align the steel stems into the guide sleeves and push the head restraint down until it locks.
Folding the Head Restraint
1. Press and hold button E. 2. Pull the head restraint back up to reset.
Tilting Head Restraints
The front head restraints tilt for extra comfort. To tilt the head restraint, do the following:
MANUAL SEATS (If Equipped)
WARNING Do not adjust the driver seat or seatback when your vehicle is moving.
Moving the Seat Backward and Forward
E144727
1. Adjust the seatback to an upright driving or riding position.
2. Pivot the head restraint forward toward your head to the desired position.
After the head restraint reaches the forward-most tilt position, pivot it forward again to release it to the rearward, un-tilted position.
E163870
WARNING Rock the seat backward and forward after releasing the lever to make sure that it is fully engaged.
117
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seats
Adjusting the Height of the Driver Seat
E163871
Recline Adjustment
WARNING
Do not place cargo or any objects behind the seatback before returning it to the original position. Pull on the seatback to make sure that it has fully latched after returning the seatback to its original position. An unlatched seat may become dangerous if you stop suddenly or have a crash.
POWER SEATS (If Equipped)
WARNINGS Do not adjust the driver's seat or seatback when your vehicle is moving. Adjusting your seatback while your vehicle is in motion may cause loss of control of your vehicle.
Do not place cargo or any objects behind the seatback before returning it to the original position.
E163872
118
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seats
E138647
119
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Power Lumbar (If Equipped)
Seats
E138648
MEMORY FUNCTION (If Equipped)
WARNINGS Before activating the memory seat, make sure that the area immediately surrounding the seat is clear of obstructions and that all occupants are clear of moving parts. Do not use the memory function when your vehicle is moving.
This function automatically recalls the position of the following: · Driver seat. · Power mirrors. The memory control is on the driver door.
E142554
Saving a PreSet Position
1. Switch the ignition on.
2. Adjust the memory features to your desired position.
3. Press and hold the desired memory button until you hear a single tone.
You can save up to three memory position presets. You can save a memory preset at any time.
Recalling a Pre-Set Position
Press and release the memory button associated with your desired driving position. The memory features move to the position stored for that preset.
Note: You can only recall a preset memory position when you switch the ignition off, or when the transmission is in park (P) or neutral (N) (and your vehicle is not moving) if you switch the ignition on.
You can also recall a preset memory position by:
· Pressing the unlock button on your intelligent access keyfob if it is linked to a preset position.
· Unlocking the intelligent driver door handle if a linked key fob is present.
· Entering a personal entry code on the Securicode keypad. See Keyless Entry (page 61).
120
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seats
Note: Using a linked key fob to recall your memory position when the ignition is off moves the seat to the Easy Entry position.
Note: Pressing any active memory feature adjustment control (or any memory button) during a memory recall cancels the operation.
Linking a PreSet Position to your Remote Control or Intelligent Access Key Fob
You can save preset memory positions for up to three remote controls or intelligent access (IA) keys.
1. With the ignition on, move the memory positions to the desired positions.
2. Press and hold the desired preset button for about five seconds. A tone sounds after about two seconds. Continue holding until you hear a second tone.
3. Within three seconds, press the lock button on the remote control you are linking.
To unlink a remote control, follow the same procedure except in step 3, press the unlock button on the remote control.
Note: If more than one linked remote control or intelligent access key is in range, the memory function moves to the settings of the first key to initiate a memory recall.
Easy Entry and Exit Feature
If you enable the easy entry and exit feature, it automatically moves the driver seat position rearward up to 2 in (5 cm) when you switch the ignition off.
The driver seat will return to its previous position when you switch the ignition on.
You can enable or disable this feature in the information display. See Information Displays (page 91).
REAR SEATS
E155554
Folding the Seatback With the seat empty, pull the lever up to fold the seatback forward. You may need to fold the outboard head restraints and lower the center head restraint first. Unfolding the Seatback Pull the seatback upward to unfold the seatback. Recline Adjustment (If Equipped) With the seat occupied, pull the lever up to recline the seatback.
121
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Seats
HEATED SEATS (If Equipped)
WARNING People who are unable to feel pain to their skin because of advanced age, chronic illness, diabetes, spinal cord injury, medication, alcohol use, exhaustion or other physical conditions, must exercise care when using the heated seat. The heated seat may cause burns even at low temperatures, especially if used for long periods of time. Do not place anything on the seat that insulates against heat, such as a blanket or cushion. This may cause the heated seat to overheat. Do not puncture the seat with pins, needles or other pointed objects. This may damage the heating element which may cause the heated seat to overheat. An overheated seat may cause serious personal injury.
Do not do the following: · Place heavy objects on the seat. · Operate the heated seat if water or any
other liquid is spilled on the seat. Allow the seat to dry thoroughly. · Operate the heated seats unless the engine is running. Doing so can cause the battery to lose charge.
E146941
Press the heated seat symbol to cycle through the various heat settings and off. Warmer settings are indicated by more indicator lights.
122
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Universal Garage Door Opener (If Equipped)
HomeLink Wireless Control System
WARNINGS
Make sure that the garage door and security device are free from obstruction when you are programming. Do not program the system with the vehicle in the garage.
Do not use the system with any garage door opener that does not have the safety stop and reverse feature as required by U.S. Federal Safety Standards (this includes any garage door opener manufactured before April 1, 1982). A garage door opener which cannot detect an object, signaling the door to stop and reverse, does not meet current federal safety standards. Using a garage door opener without these features increases the risk of serious injury or death.
Note: Make sure you keep the original remote control transmitter for use in other vehicles as well as for future system programming.
Note: We recommend that upon the sale or lease termination of your vehicle, you erase the programmed function buttons for security reasons. See Erasing the Function Button Codes later in this section.
Note: You can program a maximum of three devices. To change or replace any of the three devices after it has been initially programmed, you must first erase the current settings. See Erasing the Function Button Codes.
E188211
The universal garage door opener replaces the common hand-held garage door opener with a three-button transmitter integrated into the driver's sun visor.
The system includes two primary features, a garage door opener and a platform for remote activation of devices within the home. You can program garage doors as well as entry gate operators, security systems, entry door locks and home or office lighting.
Additional system information can be found online at www.homelink.com, www.youtube.com/user/HomeLinkGentex or by calling the toll-free help line at 1-800-355-3515.
In-Vehicle Programming
This process is to program your in-vehicle HomeLink function button with your hand-held transmitter.
Note: The programming steps below assume you will be programming HomeLink that was not previously programmed. If your HomeLink was previously programmed, you may need to erase your HomeLink buttons. See Erasing the Function Button Codes.
Note: Put a new battery in the hand-held transmitter. This helps ensure quicker training and accurate transmission of the radio-frequency signal.
123
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Universal Garage Door Opener (If Equipped)
E188212
1. With your vehicle parked outside of the garage, switch your ignition to the on position, but do not start your vehicle.
2. Press and release the function button that you would like to program.
3. Hold your hand-held garage door transmitter 13 in (28 cm) away from the HomeLink button you want to program.
4. Press and hold the hand-held transmitter button you want to program while watching the indicator light on HomeLink. Continue to hold the hand-held button until the HomeLink indicator light flashes rapidly or is continuously on.
Note: You may need to use a different method if you live in Canada or have difficulties programming your gate operator or garage door opener. See Gate Operator / Canadian Programming.
5. Press and hold the HomeLink button you programmed for two seconds, then release. You may need to do this twice to activate the door. If your garage door does not operate, watch the HomeLink indicator light.
If the indicator light stays on, the programming is complete. Your device should activate when the HomeLink button is pressed and released.
If the indicator light flashes rapidly, press and hold for two seconds and release the programmed HomeLink button. Repeat the "press/hold/release" sequence up to three times to complete the programming process. If your device still does not operate, you must program your garage door. See Programming Your Garage Door Opener Motor. To program additional buttons, repeat Steps 1 4. For questions or comments, please contact HomeLink at www.homelink.com, www.youtube.com/user/HomeLinkGentex or by calling the toll-free help line at 1-800-355-3515.
Programming Your Garage Door Opener Motor
Note: You may need a ladder to reach the unit and you may need to remove the cover or lamp lens on your garage door opener.
E142659
1. Press the learn button on the garage door opener motor and then you have 30 seconds to complete the next two steps.
2. Return to your vehicle.
124
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Universal Garage Door Opener (If Equipped)
E188212
3. Press and hold the function button you want to program for 2 seconds, then release. Repeat this step. Depending on your brand of garage door opener, you may need to repeat this sequence a third time.
Gate Operator / Canadian Programming
Canadian radio-frequency laws require transmitter signals to "time-out" (or quit) after several seconds of transmission which may not be long enough for HomeLink to pick up the signal during programming. Similar to this Canadian law, some U.S. gate operators are designed to "time-out" in the same manner.
Note: If programming a garage door opener or gate operator, it is advised to unplug the device during the "cycling" process to prevent possible overheating.
1. Press and release, every two seconds, your hand-held transmitter until the HomeLink indicator light changes to a rapidly blinking or continuously on light.
2. Release the hand-held transmitter button.
3. Continue programing HomeLink. See In-Vehicle Programming, Step 4.
Erasing the Function Button Codes
Note: You cannot erase individual buttons.
E188213
1. Press and hold the outer two function buttons simultaneously for approximately 10 seconds until the indicator light above the buttons flashes rapidly.
2. When the indicator light flashes, release the buttons. You erased the codes for all buttons.
Reprogramming a Single Button
To program a device to a previously trained button, follow these steps:
1. Press and hold the desired button. Do NOT release the button.
2. The indicator light begins to flash after 20 seconds. Without releasing the button, follow Step 1 in the Programming section.
For questions or comments, contact HomeLink at www.homelink.com, www.youtube.com/user/HomeLinkGentex or by calling the toll-free help line at 1-800-355-3515.
125
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Universal Garage Door Opener (If Equipped)
FCC and RSS-210 Industry Canada Compliance This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation. Note: Changes or modifications to your device not expressly approved by the party responsible for compliance can void the user's authority to operate the equipment. This equipment complies with FCC radiation exposure limits set forth for an uncontrolled environment. End Users must follow the specific operating instructions for satisfying RF exposure compliance. This transmitter must be at least 8 in (20 cm) from the user and must not be co-located or operating in conjunction with any other antenna or transmitter. The term "IC:" before the certification/registration number only signifies that Industry Canada technical specifications were met.
126
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Auxiliary Power Points
12 Volt DC Power Point
WARNING
Do not plug optional electrical accessories into the cigar lighter socket. Incorrect use of the cigar lighter can cause damage not covered by the vehicle warranty, and can result in fire or serious injury.
Note: When you switch the ignition on, you can use the socket to power 12 volt appliances with a maximum current rating of 15 amps.
If the power supply does not work after you switch the ignition off, switch the ignition on. Note: Do not hang any accessory from the accessory plug.
Note: Do not use the power point over the vehicle capacity of 12 volt DC 180 watts or a fuse may blow.
Note: Always keep the power point caps closed when not in use.
Do not insert objects other than an accessory plug into the power point. This damages the power point and may blow the fuse.
Run the vehicle for full capacity use of the power point.
To prevent the battery from running out of charge:
· Do not use the power point longer than necessary when the vehicle is not running.
· Do not leave devices plugged in overnight or when you park your vehicle for extended periods.
Locations
Power points may be in the following locations: · On the front of the center console. · Inside the center console. · On the rear of the center console. · In the cargo area.
110 Volt AC Power Point (If Equipped)
WARNING
Do not keep electrical devices plugged in the power point whenever the device is not in use. Do not use any extension cord with the 110 volt AC power point, since it will defeat the safety protection design. Doing so may cause the power point to overload due to powering multiple devices that can reach beyond the 150 watt load limit and could result in fire or serious injury.
Note: The power point turns off when you switch the ignition off, or when the battery voltage drops below 11 volts.
You can use the power point for electric devices that require up to 150 watts. It is on the rear of the center console.
E248640
127
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Auxiliary Power Points
When the indicator light on the power point is: · On: The power point is working, the
ignition is on and a device is plugged in. · Off: The power point is off, the ignition is off or no device is plugged in. · Flashing: The power point is in fault mode. The power outlet temporarily turns off power when in fault mode if the device exceeds the 150 watt limit. Unplug your device and switch the ignition off. Switch the ignition back on, but do not plug your device back in. Let the system cool off and switch the ignition off to reset the fault mode. Switch the ignition back on and make sure the indicator light remains on. Do not use the power point for certain electric devices, including: · Cathode-ray, tube-type televisions. · Motor loads, such as vacuum cleaners, electric saws and other electric power tools or compressor-driven refrigerators. · Measuring devices, which process precise data, such as medical equipment or measuring equipment. · Other appliances requiring an extremely stable power supply such as microcomputer-controlled electric blankets or touch-sensor lamps.
128
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Storage Compartments
CENTER CONSOLE
Stow items in the cup holder carefully as items may become loose during hard braking, acceleration or crashes, including hot drinks which may spill.
Available console features include:
OVERHEAD CONSOLE
E131605
Press near the rear edge of the door to open it.
REAR SEAT ARMREST
E224821
A Front storage compartment with auxiliary power point and USB port.
B Cup holder.
C Storage compartment with auxiliary power point and USB port.
D Auxiliary power point.
E138656
Fold the armrest down to use the armrest and cupholder.
129
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Starting and Stopping the Engine
GENERAL INFORMATION
WARNINGS
Extended idling at high engine speeds can produce very high temperatures in the engine and exhaust system, creating the risk of fire or other damage.
Do not park, idle or drive your vehicle on dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, creating the risk of fire.
Do not start the engine in a closed garage or in other enclosed areas. Exhaust fumes can be toxic. Always open the garage door before you start the engine.
Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately. Do not drive if you smell exhaust fumes.
If you disconnect the battery, your vehicle may exhibit some unusual driving characteristics for approximately 5 mi (8 km) after you reconnect it. This is because the engine management system must realign itself with the engine. You can disregard any unusual driving characteristics during this period.
The powertrain control system meets all Canadian interference-causing equipment standard requirements regulating the impulse electrical field or radio noise.
When you start the engine, avoid pressing the accelerator pedal before and during operation. Only use the accelerator pedal when you have difficulty starting the engine.
IGNITION SWITCH (If Equipped)
E72128
0 (off) - The ignition is off. Note: When you switch the ignition off and leave your vehicle, do not leave your key in the ignition. This could cause your vehicle battery to lose charge. I (accessory) - Allows the electrical accessories, such as the radio, to operate while the engine is not running. Note: Do not leave the ignition key in this position for too long. This could cause your vehicle battery to lose charge. II (on) - All electrical circuits are operational and the warning lamps and indicators illuminate. III (start) - cranks the engine.
KEYLESS STARTING (If Equipped)
Note: The keyless starting system may not function if the key is close to metal objects or electronic devices such as cellular phones Note: A valid key must be located inside your vehicle to switch the ignition on and start the engine.
130
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Starting and Stopping the Engine
Ignition Modes
E142555
The keyless starting system has three modes: Off: Turns the ignition off. · Without applying the brake pedal,
press and release the button once when the ignition is in the on mode, or when the engine is running but the vehicle is not moving. On: All electrical circuits are operational and the warning lamps and indicators illuminate. · Without applying the brake pedal, press and release the button once. Start: Starts the engine. · Press the brake pedal, and then press and hold the button until the engine starts.
STARTING A GASOLINE ENGINE
When you start the engine, the idle speed increases. This helps to warm up the engine. If the engine idle speed does not slow down automatically, have your vehicle checked by an authorized dealer.
Before starting the engine check the following: · Make sure all occupants have fastened
their seatbelts. · Make sure the headlamps and
electrical accessories are off. · Make sure the parking brake is on. · Make sure the transmission is in park
(P).
Vehicles with an Ignition Key
Note: Do not touch the accelerator pedal.
1. Fully depress the brake pedal. 2. Turn the key to the start position to
start your vehicle. Note: The engine may continue cranking for up to 15 seconds or until it starts.
Note: If you cannot start the engine on the first try, wait for a short period and try again.
Vehicles with Keyless Start
Note: Do not touch the accelerator pedal.
1. Fully depress the brake pedal. 2. Press the push button ignition switch
until the engine starts.
The system does not function if: · The passive key frequencies are
jammed. · The key battery has no charge.
If you are unable to start your vehicle, do the following:
131
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Starting and Stopping the Engine
E241281
1. Place the key in the middle of the tray as shown.
2. With the key in this position, press the brake pedal then press the push button ignition switch to switch the ignition on and start your vehicle.
Fast Restart
The fast restart feature allows you to restart your vehicle within 20 seconds of switching it off, even if it does not detect a valid passive key.
Within 20 seconds of switching the engine off, press the brake pedal and press the push button ignition switch. After 20 seconds, you can no longer start your vehicle if it does not detect a valid passive key.
Once your vehicle starts, it remains running until you press the push button ignition switch, even if your vehicle does not detect a valid passive key. If you open and close a door while your vehicle is running, the system searches for a valid passive key. You cannot start your vehicle if the system does not detect a valid passive key within 20 seconds.
Failure to Start
If you cannot start your vehicle after three attempts, wait 10 seconds and do the following:
1. Fully depress the brake pedal.
2. Fully press the accelerator pedal and hold it there.
3. Start the engine.
Automatic Engine Shutdown
For vehicles with a keyless ignition, this automatically shuts down your vehicle if it has been idling for an extended period. The ignition also turns off to save battery power. Before your vehicle shuts down, a message appears in the information display showing a timer counting down. If you do not intervene within 30 seconds, your vehicle shuts down. Another message appears in the information display to inform you that your vehicle has shut down to save fuel. Start your vehicle as normal.
Automatic Engine Shutdown Override
Note: You cannot permanently switch off the automatic shutdown. When you switch it off temporarily, it turns on at the next ignition cycle.
132
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Starting and Stopping the Engine
You can stop the shutdown, or reset the timer, at any point before the 30-second countdown has expired by doing any of the following: · Interacting with your vehicle, for
example pressing the brake or accelerator pedal. · You can temporarily switch off the shutdown any time the ignition is on using the information display. See Information Displays (page 91). · Pressing the OK or RESET button to temporarily switch the feature off for the current ignition cycle only.
Stopping the Engine When Your Vehicle is Stationary
Vehicles with an Ignition Key
1. Shift into park (P).
2. Apply the parking brake.
3. Turn the key to the off position.
Vehicles with Keyless Start
1. Shift into park (P).
2. Apply the parking brake.
3. Press the push button ignition switch.
Note: The ignition, all electrical circuits and all warning lamps and indicators will be turned off.
Stopping the Engine When Your Vehicle is Moving
WARNING
Switching off the engine when the vehicle is still moving will result in a loss of brake and steering assistance. The steering will not lock, but higher effort will be required. When the ignition is switched off, some electrical circuits, including air bags, warning lamps and indicators may also be off. If the ignition was turned off accidentally, you can shift into neutral (N) and re-start the engine.
Vehicles with an Ignition Key
1. Shift into neutral and use the brakes to bring your vehicle to a safe stop.
2. When your vehicle has stopped, shift into park (P) and switch the ignition off.
3. Apply the parking brake.
Vehicles with Keyless Start
1. Shift into neutral and use the brakes to bring your vehicle to a safe stop.
2. When your vehicle has stopped, shift into park (P).
3. Press and hold the push button ignition switch, or press it three times within two seconds.
4. Apply the parking brake.
Guarding Against Exhaust Fumes
WARNING
Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately. Do not drive if you smell exhaust fumes.
133
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Starting and Stopping the Engine
Important Ventilating Information
If you stop your vehicle and then leave the engine idling for long periods, we recommend that you do one of the following: · Open the windows at least 1 in (3 cm). · Set your climate control to outside air.
ENGINE BLOCK HEATER (If
Equipped)
WARNINGS Failure to follow engine block heater instructions could result in property damage or serious personal injury.
Do not use your heater with ungrounded electrical systems or two-pronged adapters. There is a risk of electrical shock.
Do not fully close the hood, or allow it to drop under its own weight when using the engine block heater. This could damage the power cable and may cause an electrical short resulting in fire, injury and property damage.
Note: The heater is most effective when outdoor temperatures are below 0°F (-18°C).
The heater acts as a starting aid by warming the engine coolant. This allows the climate control system to respond quickly. The equipment includes a heater element (installed in the engine block) and a wire harness. You can connect the system to a grounded 120-volt AC electrical source.
We recommend that you do the following for a safe and correct operation:
· Use a 16-gauge outdoor extension cord that is product certified by Underwriter's Laboratory (UL) or Canadian Standards Association (CSA). This extension cord must be suitable for use outdoors, in cold temperatures, and be clearly marked Suitable for Use with Outdoor Appliances. Do not use an indoor extension cord outdoors. This could result in an electric shock or become a fire hazard.
· Use as short an extension cord as possible.
· Do not use multiple extension cords.
· Make sure that when in operation, the extension cord plug and heater cord plug connections are free and clear of water. This could cause an electric shock or fire.
· Make sure your vehicle is parked in a clean area, clear of combustibles.
· Make sure the heater, heater cord and extension cord are firmly connected.
· Check for heat anywhere in the electrical hookup once the system has been operating for approximately 30 minutes.
· Make sure the system is unplugged and properly stowed before starting and driving your vehicle. Make sure the protective cover seals the prongs of the block heater cord plug when not in use.
· Make sure the heater system is checked for proper operation before winter.
Using the Engine Block Heater
Make sure the receptacle terminals are clean and dry prior to use. Clean them with a dry cloth if necessary.
134
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Starting and Stopping the Engine
The heater uses 0.4 to 1.0 kilowatt-hours of energy per hour of use. The system does not have a thermostat. It achieves maximum temperature after approximately three hours of operation. Using the heater longer than three hours does not improve system performance and unnecessarily uses electricity.
135
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Unique Driving Characteristics
AUTO-START-STOP
The system helps reduce fuel consumption by automatically shutting off and restarting the engine while your vehicle is stopped. The engine will restart automatically when you release the brake pedal. In some situations, your vehicle may restart automatically, for example:
· To maintain interior comfort
· To recharge the battery
Note: Power assist steering is turned off when the engine is off.
WARNINGS Always fully apply the parking brake. Make sure you shift into park (P) for vehicles with an automatic transmission. Switch the ignition off and remove the key whenever you leave your vehicle.
Before opening the hood or performing any maintenance, fully apply the parking brake, shift into park (P) or neutral (N) and switch the ignition off.
Always switch the ignition off before leaving the vehicle. If the ignition is switched on an automatic restart may occur at any time.
The system may require the engine to automatically restart when the auto-start-stop indicator illuminates green or flashes amber. Failure to follow this instruction could result in personal injury.
The Auto-Start-Stop system status is available at a glance within the information display. See Information Displays (page 91).
Enabling Auto-Start-Stop
The system is automatically enabled every time you start your vehicle if the following conditions are met:
· The Auto-Start-Stop button is not pressed (not illuminated).
· Your vehicle exceeds an initial speed of 3 mph (5 km/h) after the vehicle has been initially started.
· Your vehicle is stopped.
· Your foot is on the brake pedal.
· The transmission is in drive (D).
· The driver's door is closed.
· There is adequate brake vacuum.
· The interior compartment has been cooled or warmed to an acceptable level.
· The front windshield defroster is off.
· The steering wheel is not turned rapidly or is not at a sharp angle.
· The vehicle is not on a steep road grade.
· The battery is within optimal operating conditions (battery state of charge and temperature in range).
· The engine coolant is at operating temperature.
· Elevation is below approximately 10,000 ft (3,048 m).
· Ambient temperature is moderate.
The green Auto-Start-Stop indicator light on the instrument cluster will illuminate to indicate when the automatic engine stop occurs.
If the instrument cluster is equipped with a grey E146361 Auto-Start-Stop indicator light, it is illuminated when automatic engine stop is not available due to one of the above noted conditions not being met.
136
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Unique Driving Characteristics
Automatic Engine Restart
Any of the following conditions will result in an automatic restart of the engine:
· Your foot is removed from the brake pedal.
· You press the accelerator pedal.
· You press the accelerator and the brake pedal at the same time.
· The driver seatbelt becomes unfastened or the driver door is ajar.
· The transmission is moved from drive (D).
· Your vehicle is moving.
· The interior compartment does not meet customer comfort when air conditioning or heat is on.
· Fogging of the windows could occur and the air conditioning is on.
· The battery is not within optimal operating conditions.
· The maximum engine off time is exceeded.
· When you press the Auto-Start-Stop button while the engine is stopped automatically.
· The heated windshield is turned on.
Any of the following conditions may result in an automatic restart of the engine:
· The blower fan speed is increased or the climate control temperature is changed.
· An electrical accessory is turned on or plugged in.
Disabling Auto-Start-Stop
Press the Auto-Start-Stop button located on the center console to switch the system off. The button will illuminate. The system will only be deactivated for the current ignition cycle. Press the button again to restore Auto-Start-Stop function.
If your vehicle is in an Auto-Start-Stop state and you shift the transmission to reverse while the brake is not depressed, a message telling you to press the brake will appear. You must press the brake pedal within 10 seconds, or a shift to park and a manual restart will be required.
Note: If the Shift to P, Restart Engine message appears and the amber Auto-Start-Stop indicator light is flashing, automatic restart is not available. The vehicle must be restarted manually. See Information Displays (page 91).
137
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuel and Refueling
SAFETY PRECAUTIONS
WARNINGS Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire.
The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury.
Fuels can cause serious injury or death if misused or mishandled.
Fuel may contain benzene, which is a cancer-causing agent.
When refueling always shut the engine off and never allow sparks or open flames near the fuel tank filler valve. Never smoke or use a cell phone while refueling. Fuel vapor is extremely hazardous under certain conditions. Avoid inhaling excess fumes.
Follow these guidelines when refueling:
· Extinguish all smoking materials and any open flames before refueling your vehicle.
· Always switch the engine off before refueling.
· Automotive fuels can be harmful or fatal if swallowed. Fuel is highly toxic and if swallowed can cause death or permanent injury. If fuel is swallowed immediately call a physician, even if no symptoms are immediately apparent. The toxic effects of fuel may not be apparent for hours.
· Avoid inhaling fuel vapors. Inhaling fuel vapor can lead to eye and respiratory tract irritation. In severe cases, excessive or prolonged breathing of fuel vapor can cause serious illness and permanent injury.
· Avoid getting fuel in your eyes. If you splash fuel in your eyes, immediately remove contact lenses (if worn), flush with water for 15 minutes and seek medical attention. Failure to seek proper medical attention could lead to permanent injury.
· Fuels can be harmful if absorbed through the skin. If you splash fuel on your skin, clothing or both, promptly remove contaminated clothing and thoroughly wash your skin with soap and water. Repeated or prolonged skin contact causes skin irritation.
· Be particularly careful if you are taking Antabuse or other forms of Disulfiram for the treatment of alcoholism. Breathing fuel vapors could cause an adverse reaction, serious personal injury or sickness. Immediately call a physician if you experience any adverse reactions.
FUEL QUALITY
Choosing the Right Fuel
E161513
Your vehicle is designed to operate on regular unleaded gasoline with a minimum pump (R+M)/2 octane rating of 87.
138
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuel and Refueling
Some fuel stations, particularly those in high altitude areas, offer fuels posted as regular unleaded gasoline with an octane rating below 87.
For best overall vehicle and engine performance, premium fuel with an octane rating of 91 or higher is recommended. The performance gained by using premium fuel is most noticeable in hot weather as well as other conditions, for example when towing a trailer. See Towing (page 207).
Do not be concerned if the engine sometimes knocks lightly. However, if the engine knocks heavily while using fuel with the recommended octane rating, contact an authorized dealer to prevent any engine damage.
We recommend Top Tier detergent gasolines, where available to help minimize engine deposits and maintain optimal vehicle and engine performance. For additional information, refer to www.toptiergas.com.
Note: Use of any fuel for which the vehicle was not designed can impair the emission control system, cause loss of vehicle performance, and cause damage to the engine which may not be covered by the vehicle Warranty.
Do not use:
· Diesel fuel.
· Fuels containing kerosene or paraffin.
· Fuel containing more than 15% ethanol or E85 fuel.
· Fuels containing methanol.
· Fuels containing metallic-based additives, including manganese-based compounds.
· Fuels containing the octane booster additive, methylcyclopentadienyl manganese tricarbonyl (MMT).
· Leaded fuel, using leaded fuel is prohibited by law.
The use of fuels with metallic compounds such as methylcyclopentadienyl manganese tricarbonyl (commonly known as MMT), which is a manganese-based fuel additive, will impair engine performance and affect the emission control system.
FUEL QUALITY
Choosing the Right Fuel - Flex Fuel Vehicles Flex fuel vehicles have one of the following identifiers: · Yellow fuel filler cap. · Yellow bezel around the fuel filler inlet. · Yellow fuel filler housing. · Yellow E85 label on the fuel tank filler
door.
E161513
Your vehicle is designed to operate on regular unleaded gasoline with a minimum pump (R+M)/2 octane rating of 87 or regular unleaded gasoline blended with a maximum of 85% ethanol (E85). Some fuel stations, particularly those in high altitude areas, offer fuels posted as regular unleaded gasoline with an octane rating below 87.
139
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuel and Refueling
For best overall vehicle and engine performance, premium fuel with an octane rating of 91 or higher is recommended. The performance gained by using premium fuel is most noticeable in hot weather as well as other conditions, for example when towing a trailer. See Towing (page 207).
Do not be concerned if the engine sometimes knocks lightly. However, if the engine knocks heavily while using fuel with the recommended octane rating, contact an authorized dealer to prevent any engine damage.
We recommend Top Tier detergent gasolines, where available to help minimize engine deposits and maintain optimal vehicle and engine performance. For additional information, refer to www.toptiergas.com.
Note: Use of any fuel for which the vehicle was not designed can impair the emission control system, cause loss of vehicle performance, and cause damage to the engine which may not be covered by the vehicle Warranty.
Do not use:
· Diesel fuel.
· Fuels containing kerosene or paraffin.
· Fuels containing more than 85% ethanol or E100 fuel.
· Fuels containing methanol.
· Fuels containing metallic-based additives, including manganese-based compounds.
· Fuels containing the octane booster additive, methylcyclopentadienyl manganese tricarbonyl (MMT).
· Leaded fuel, using leaded fuel is prohibited by law.
The use of fuels with metallic compounds such as methylcyclopentadienyl manganese tricarbonyl (commonly known as MMT), which is a manganese-based fuel additive, will impair engine performance and affect the emission control system.
Switching Between E85 and Gasoline
We do not recommend repeatedly alternating between E85 and gasoline. If you switch from using E85 to gasoline, or from gasoline to E85, add as much fuel as possible, at least half a tank. Drive your vehicle immediately for a minimum of 5 mi (8 km) to allow it to adapt to the change in ethanol concentration. If you use E85 exclusively, we recommend that you fill the fuel tank with regular unleaded gasoline at each scheduled oil change.
FUEL FILLER FUNNEL LOCATION
The fuel filler funnel is in the spare wheel storage tray.
RUNNING OUT OF FUEL
Running out of fuel can cause damage not covered by the vehicle Warranty.
If your vehicle runs out of fuel:
· Add a minimum of 1.3 gal (5 L) of fuel to restart the engine.
· You may need to switch the ignition from off to on several times after refueling to allow the fuel system to pump the fuel from the tank to the engine. When restarting, cranking time takes a few seconds longer than normal.
Note: If your vehicle is on a steep slope, more fuel may be required.
140
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuel and Refueling
Filling a Portable Fuel Container
WARNING
Flow of fuel through a fuel pump nozzle can produce static electricity. This can cause a fire if you are filling an ungrounded fuel container.
Use the following guidelines to avoid electrostatic charge build-up, which can produce a spark, when filling an ungrounded fuel container:
· Only use an approved fuel container to transfer fuel to your vehicle. Place the container on the ground when filling it.
· Do not fill a fuel container when it is inside your vehicle (including the cargo area).
· Keep the fuel pump nozzle in contact with the fuel container when filling it.
· Do not use a device that holds the fuel pump nozzle lever in the fill position.
Adding Fuel From a Portable Fuel Container
WARNINGS Do not insert the nozzle of a fuel container or an aftermarket funnel into the fuel filler neck. This may damage the fuel system filler neck or its seal and cause fuel to run onto the ground.
Do not try to pry open or push open the capless fuel system with foreign objects. This could damage the fuel system and its seal and cause injury to you or others.
Do not dispose of fuel in the household refuse or the public sewage system. Use an authorized waste disposal facility.
When refueling the vehicle fuel tank from a fuel container, use the fuel filler funnel included with your vehicle. See Fuel Filler Funnel Location (page 140). Note: Do not use aftermarket funnels as they may not work with the capless fuel system and can damage it. When refueling the vehicle fuel tank from a fuel container, do the following: 1. Fully open the fuel filler door. 2. Fully insert the fuel filler funnel into the
fuel filler inlet.
E157452
3. Add fuel to your vehicle from the fuel container.
4. Remove the fuel filler funnel. 5. Fully close the fuel filler door. 6. Clean the fuel filler funnel and place it
back in your vehicle or correctly dispose of it. Note: Extra funnels can be purchased from an authorized dealer if you choose to dispose of the funnel.
141
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuel and Refueling
REFUELING
A
B
Refueling System Overview
A
B
C
D
C
E267248
A Fuel filler door. B Fuel tank filler valve. C Fuel tank filler pipe.
Your vehicle does not have a fuel tank filler cap.
E206911
A Left-hand side. To open the fuel filler door, press the center rear edge of the fuel filler door and then release.
B Right-hand side. To open the fuel filler door, press the center rear edge of the fuel filler door and then release.
C Left-hand side. Pull the rear of the fuel filler door to open it.
D Right-hand side. Pull the rear of the fuel filler door to open it.
Refueling Your Vehicle
WARNINGS When refueling always shut the engine off and never allow sparks or open flames near the fuel tank filler valve. Never smoke or use a cell phone while refueling. Fuel vapor is extremely hazardous under certain conditions. Avoid inhaling excess fumes.
The fuel system may be under pressure. If you hear a hissing sound near the fuel filler inlet, do not refuel until the sound stops. Otherwise, fuel may spray out, which could cause serious personal injury.
142
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuel and Refueling
WARNINGS Do not pry open the fuel tank filler valve. This could damage the fuel system. Failure to follow this instruction could result in fire, personal injury or death.
Do not remove the fuel pump nozzle from its fully inserted position when refueling.
Stop refueling when the fuel pump nozzle automatically shuts off for the first time. Failure to follow this will fill the expansion space in the fuel tank and could lead to fuel overflowing.
Do not overfill the fuel tank. The pressure in an overfilled tank may cause leakage and lead to fuel spray and fire.
Wait at least five seconds before removing the fuel pump nozzle to allow any residual fuel to drain into the fuel tank.
1. Fully open the fuel filler door.
2. Select the correct fuel pump nozzle for your vehicle.
A
E139202
3. Insert the fuel pump nozzle up to the first notch on the nozzle A. Keep the fuel pump nozzle resting on the fuel tank filler pipe.
A
B
E139203
4. Hold the fuel pump nozzle in position B when refueling. Holding the fuel pump nozzle in position A can affect the flow of fuel and shut off the fuel pump nozzle before the fuel tank is full.
143
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuel and Refueling
A
B
E206912
5. Operate the fuel pump nozzle within the area shown.
E119081
6. When you finish refueling slightly raise the fuel pump nozzle and slowly remove it.
7. Fully close the fuel filler door. Do not attempt to start the engine if you have filled the fuel tank with incorrect fuel. Incorrect fuel use could cause damage not covered by the vehicle Warranty. Have your vehicle immediately checked.
Refueling System Warning(IfEquipped)
If the fuel tank filler valve does not fully close, a message could appear in the information display.
Message
Check Fuel Fill Inlet
If the message appears, do the following: 1. Stop your vehicle as soon as it is safe
to do so and switch the engine off. 2. Shift into park (P) or neutral (N).
3. Apply the parking brake.
4. Fully open the fuel filler door.
5. Check the fuel tank filler valve for any debris that may be restricting its movement.
6. Remove any debris from the fuel tank filler valve.
7. Fully insert a fuel pump nozzle or the fuel filler funnel provided with your vehicle into the fuel filler pipe. See Fuel Filler Funnel Location (page 140). This action should dislodge any debris that may be preventing the fuel tank filler valve from fully closing.
8. Remove the fuel pump nozzle or fuel filler funnel from the fuel filler pipe.
9. Fully close the fuel filler door.
Note: The message may not immediately reset. If the message continues to appear and a warning lamp illuminates, have your vehicle checked as soon as possible.
FUEL CONSUMPTION
Advertised Capacity
The advertised capacity is the maximum amount of fuel that you can add to the fuel tank when the fuel gauge indicates empty. See Capacities and Specifications (page 316).
In addition, the fuel tank contains an empty reserve. The empty reserve is an unspecified amount of fuel that remains in the fuel tank when the fuel gauge indicates empty.
Note: The amount of fuel in the empty reserve varies and should not be relied upon to increase driving range.
144
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuel and Refueling
Filling the Fuel Tank
For consistent results when refueling:
· Turn the ignition off before fueling; an inaccurate reading results if the engine is left running.
· Use the same fill rate (low-medium-high) each time the tank is filled.
· Allow no more than one automatic shut-off when refueling.
Results are most accurate when the filling method is consistent.
Calculating Fuel Economy
The first 1,000 mi (1,500 km) of driving is the break-in period of the engine. A more accurate measurement is obtained after 2,000 mi (3,000 km).
1. Completely fill the fuel tank and record the initial odometer reading. See Refueling (page 142).
2. Each time you fill the fuel tank, record the amount of fuel added.
3. After at least three fill ups, fill the fuel tank and record the current odometer reading.
4. Subtract your initial odometer reading from the current odometer reading.
To calculate L/100 km (liters per 100 kilometers) fuel consumption, multiply the liters used by 100, then divide by kilometers traveled. To calculate MPG (miles per gallon) fuel consumption, divide miles traveled by gallons used.
Keep a record for at least one month and record the type of driving, for example city or highway. This provides an accurate estimate of your vehicle's fuel economy under current driving conditions. Keeping records during summer and winter shows how temperature impacts fuel economy.
Conditions
· Heavily loading your vehicle reduces fuel economy.
· Carrying unnecessary weight in your vehicle may reduce fuel economy.
· Adding certain accessories to your vehicle such as bug defectors, rollbars or light bars, running boards and ski racks may reduce fuel economy.
· Using fuel blended with alcohol may lower fuel economy.
· Fuel economy may decrease with lower temperatures.
· Fuel economy may decrease when driving short distances.
· You will get better fuel economy when driving on flat terrain than when driving on hilly terrain.
145
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Engine Emission Control
EMISSION LAW
WARNING
Do not remove or alter the original equipment floor covering or insulation between it and the metal floor of the vehicle. The floor covering and insulation protect occupants of the vehicle from the engine and exhaust system heat and noise. On vehicles with no original equipment floor covering insulation, do not carry passengers in a manner that permits prolonged skin contact with the metal floor. Failure to follow these instructions may result in fire or personal injury.
U.S. federal laws and certain state laws prohibit removing or rendering inoperative emission control system components. Similar federal or provincial laws may apply in Canada. We do not approve of any vehicle modification without first determining applicable laws.
Tampering with emissions control systems including related sensors or the Diesel Exhaust Fluid system can result in reduced engine power and the illumination of the service engine soon light.
Tampering With a Noise Control System
Federal laws prohibit the following acts:
· Removal or rendering inoperative by any person other than for purposes of maintenance.
· Repair or replacement of any device or element of the design incorporated into a new vehicle for the purpose of noise control prior to its sale or delivery to the ultimate purchaser or while it is in use.
· The use of the vehicle after any person removes or renders inoperative any device or element of the design.
The U.S. Environmental Protection Agency may presume to constitute tampering as follows:
· Removal of hood blanket, fender apron absorbers, fender apron barriers, underbody noise shields or acoustically absorptive material.
· Tampering or rendering inoperative the engine speed governor, to allow engine speed to exceed manufacturer specifications.
If the engine does not start, runs rough, experiences a decrease in engine performance, experiences excess fuel consumption or produces excessive exhaust smoke, check for the following:
· A plugged or disconnected air inlet system hose.
· A plugged engine air filter element.
· Water in the fuel filter and water separator.
· A clogged fuel filter.
· Contaminated fuel.
· Air in the fuel system, due to loose connections.
· An open or pinched sensor hose.
· Incorrect engine oil level.
146
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Engine Emission Control
· Incorrect fuel for climatic conditions.
· Incorrect engine oil viscosity for climactic conditions.
Note: Some vehicles have a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed.
Note: If these checks do not help you correct the concern, have your vehicle checked as soon as possible.
Noise Emissions Warranty, Prohibited Tampering Acts and Maintenance
On January 1, 1978, Federal regulation became effective governing the noise emission on trucks over 10,000 lb (4,536 kg) Gross Vehicle Weight Rating (GVWR). The preceding statements concerning prohibited tampering acts and maintenance, and the noise warranty found in the Warranty Guide, are applicable to complete chassis cabs over 10,000 lb (4,536 kg) GVWR.
CATALYTIC CONVERTER
WARNINGS
Do not park, idle or drive your vehicle on dry grass or other dry ground cover. The emission system heats up the engine compartment and exhaust system, creating the risk of fire.
The normal operating temperature of the exhaust system is very high. Never work around or attempt to repair any part of the exhaust system until it has cooled. Use special care when working around the catalytic converter. The catalytic converter heats up to a very high temperature after only a short period of engine operation and stays hot after the engine is switched off.
WARNINGS
Exhaust leaks may result in entry of harmful and potentially lethal fumes into the passenger compartment. If you smell exhaust fumes inside your vehicle, have your vehicle inspected immediately. Do not drive if you smell exhaust fumes.
Your vehicle has various emission control components and a catalytic converter that enables it to comply with applicable exhaust emission standards.
To make sure that the catalytic converter and other emission control components continue to work properly:
· Do not crank the engine for more than 10 seconds at a time.
· Do not run the engine with a spark plug lead disconnected.
· Do not push-start or tow-start your vehicle. Use booster cables. See Jump Starting the Vehicle (page 218).
· Use only the specified fuel listed.
· Do not switch the ignition off when your vehicle is moving.
· Avoid running out of fuel.
· Have the items listed in scheduled maintenance information performed according to the specified schedule.
Note: Resulting component damage may not be covered by the vehicle Warranty.
The scheduled maintenance items listed in scheduled maintenance information are essential to the life and performance of your vehicle and to its emissions system.
If you use anything other than Ford, Motorcraft or Ford-authorized parts for maintenance replacements or for service of components affecting emission control, such non-Ford parts should be equivalent to genuine Ford Motor Company parts in performance and durability.
147
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Engine Emission Control
Illumination of the service engine soon indicator, charging system warning light or the temperature warning light, fluid leaks, strange odors, smoke or loss of engine power could indicate that the emission control system is not working properly.
An improperly operating or damaged exhaust system may allow exhaust to enter the vehicle. Have a damaged or improperly operating exhaust system inspected and repaired immediately.
Do not make any unauthorized changes to your vehicle or engine. By law, vehicle owners and anyone who manufactures, repairs, services, sells, leases, trades vehicles, or supervises a fleet of vehicles are not permitted to intentionally remove an emission control device or prevent it from working. Information about your vehicle's emission system is on the Vehicle Emission Control Information Decal located on or near the engine. This decal also lists engine displacement.
Please consult your warranty information for complete details.
On-Board Diagnostics (OBD-II)
Your vehicle has a computer known as the on-board diagnostics system (OBD-II) that monitors the engine's emission control system. The system protects the environment by making sure that your vehicle continues to meet government emission standards. The OBD-II system also assists a service technician in properly servicing your vehicle.
When the service engine soon indicator illuminates, the OBD-II system has detected a malfunction. Temporary malfunctions may cause the service engine soon indicator to illuminate. Examples are:
1. Your vehicle has run out of fuel--the engine may misfire or run poorly.
2. Poor fuel quality or water in the fuel--the engine may misfire or run poorly.
3. The fuel fill inlet may not have closed properly. See Refueling (page 142).
4. Driving through deep water--the electrical system may be wet.
You can correct these temporary malfunctions by filling the fuel tank with good quality fuel, properly closing the fuel fill inlet or letting the electrical system dry out. After three driving cycles without these or any other temporary malfunctions present, the service engine soon indicator should stay off the next time you start the engine. A driving cycle consists of a cold engine startup followed by mixed city and highway driving. No additional vehicle service is required.
If the service engine soon indicator remains on, have your vehicle serviced at the first available opportunity. Although some malfunctions detected by the OBD-II may not have symptoms that are apparent, continued driving with the service engine soon indicator on can result in increased emissions, lower fuel economy, reduced engine and transmission smoothness and lead to more costly repairs.
Readiness for Inspection and Maintenance (I/M) Testing
Some state and provincial and local governments may have Inspection/Maintenance (I/M) programs to inspect the emission control equipment on your vehicle. Failure to pass this inspection could prevent you from getting a vehicle registration.
If the service engine soon indicator is on or the bulb does not work, your vehicle may need service. See On-Board Diagnostics.
148
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Engine Emission Control
Your vehicle may not pass the I/M test if the service engine soon indicator is on or not working properly (bulb is burned out), or if the OBD-II system has determined that some of the emission control systems have not been properly checked. In this case, the vehicle is not ready for I/M testing.
If the vehicle's engine or transmission has just been serviced, or the battery has recently run down or been replaced, the OBD-II system may indicate that the vehicle is not ready for I/M testing. To determine if the vehicle is ready for I/M testing, turn the ignition key to the on position for 15 seconds without cranking the engine. If the service engine soon indicator blinks eight times, it means that the vehicle is not ready for I/M testing; if the service engine soon indicator stays on solid, it means that your vehicle is ready for I/M testing.
The OBD-II system checks the emission control system during normal driving. A complete check may take several days.
If the vehicle is not ready for I/M testing, you can perform the following driving cycle consisting of mixed city and highway driving:
1. 15 minutes of steady driving on an expressway or highway followed by 20 minutes of stop-and-go driving with at least four 30-second idle periods.
2. Allow your vehicle to sit for at least eight hours with the ignition off. Then, start the vehicle and complete the above driving cycle. The vehicle must warm up to its normal operating temperature. Once started, do not turn off the vehicle until the above driving cycle is complete.
If the vehicle is still not ready for I/M testing, you need to repeat the above driving cycle.
149
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Transmission
AUTOMATIC TRANSMISSION
WARNINGS Always fully apply the parking brake and make sure you shift into park (P). Failure to follow this instruction could result in personal injury or death.
Do not apply the brake pedal and accelerator pedal simultaneously. Applying both pedals simultaneously for more than a few seconds will limit engine performance, which may result in difficulty maintaining speed in traffic and could lead to serious injury.
When your vehicle is stationary, keep the brake pedal fully pressed when shifting gears. Failure to follow this instruction could result in personal injury, death or property damage.
Note: You may not be able to shift out of park (P) unless the intelligent access key is inside your vehicle.
Understanding the Positions of Your Automatic Transmission
E142629
P R N
Park Reverse Neutral
D Drive
S Sport
Putting your vehicle in or out of gear:
Press the button on the front of the transmission selector to shift to each position. The transmission selector position will be shown in the instrument cluster.
1. Fully press down on the brake pedal. 2. Move the gearshift lever into the
desired gear. 3. When you are finished driving, come to
a complete stop. 4. Move the gearshift lever and securely
latch it in park (P).
Park (P)
This position locks the transmission and prevents the wheels from turning.
Reverse (R)
With the gearshift lever in reverse (R), your vehicle moves backward. Always come to a complete stop before shifting into and out of reverse (R).
Neutral (N)
With the gearshift lever in neutral (N), your vehicle can be started and is free to roll. Hold the brake pedal down while in this position.
Drive (D)
Drive (D) is the normal driving position for the best fuel economy. The overdrive function allows automatic upshifts and downshifts through gears one through six.
150
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Transmission
Sport (S)
Switch on sport mode by shifting the gearshift lever to sport (S). In Sport mode the transmission will select the optimum gear for best performance. This gear selection is typically lower than that of drive (D) and the shifts are faster.
Moving the gearshift lever to sport (S):
· Provides additional grade (engine) braking and extends lower gear operation to enhance performance for uphill climbs, hilly terrain or mountainous areas. This will increase engine RPM during engine braking.
· Provides additional lower gear operation through the automatic transmission shift strategy.
· Gears are selected more quickly and at higher engine speeds.
SelectShift AutomaticTM Transmission
Your vehicle is equipped with a SelectShift Automatic transmission gearshift lever. The SelectShift Automatic transmission gives you the ability to change gears up or down as desired.
In order to prevent the engine from running at too low an RPM, which may cause it to stall, SelectShift still automatically makes some downshifts if it has determined that you have not downshifted in time. Although SelectShift makes some downshifts for you, it still allows you to downshift at any time as long as the SelectShift determines that damage will not be caused to the engine from over-revving.
Note: Engine damage may occur if you maintain excessive engine revving without shifting.
If the engine is approaching the RPM limit, SelectShift automatically upshifts for you.
If equipped with the toggle on the gearshift lever, press the + toggle switch on the side of the transmission selector to activate SelectShift. · Press the (+) button to upshift. · Press the (-) button to downshift.
E142629
If equipped with steering wheel paddles, pull the + paddle on the steering wheel to activate SelectShift. · Pull the right paddle (+) to upshift. · Pull the left paddle () to downshift.
E144821
SelectShift in drive (D): · Provides a temporary manual mode
for performing more demanding maneuvers where extra control of gear selection is required (for example, when towing or overtaking). This mode will hold a selected gear for a temporary period of time dependent on driver inputs (for example, steering or accelerator pedal input).
151
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Transmission
SelectShift in sport (S):
· Provides a permanent manual gear selection where full control of gear selection is required.
To exit SelectShift mode, shift the transmission into drive (D).
The instrument cluster displays your currently selected gear. If a gear is requested but not available due to vehicle conditions (low speed, too high engine speed for requested gear selection), the current gear will flash three times.
Note: At full accelerator pedal travel the transmission will auto downshift to ensure maximum performance.
Note: In low traction conditions, you can pull away in second gear using SelectShift. To perform this operation select drive (D) or sport (S) mode and press the + toggle (if equipped) or pull the + paddle (if equipped) until 2 is displayed on the cluster. Your vehicle is now ready to move in 2nd gear.
Brake-Shift Interlock Override
WARNINGS
Do not drive your vehicle until you verify that the stoplamps are working.
When doing this procedure, you need to take the transmission out of park (P) which means your vehicle can roll freely. To avoid unwanted vehicle movement, always fully apply the parking brake prior to doing this procedure. Use wheels chocks if appropriate.
If the parking brake is fully released, but the brake warning lamp remains illuminated, the brakes may not be working properly. Have your vehicle checked as soon as possible.
Use the brake shift interlock lever to move the gearshift lever from the park position in the event of an electrical malfunction or if your vehicle has a dead battery. Apply the parking brake and turn your vehicle off before performing this procedure.
E223576
1. Remove the shifter boot using a suitable tool
E223577
2. Using a screwdriver or similar tool, depress the brake shift interlock override until the blocker moves.
152
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Transmission
3. Move the transmission selector from park (P) to neutral (N).
4. Install the shifter boot. 5. Apply the brake pedal, start the vehicle
and release the parking brake. Note: See your authorized dealer as soon as possible if this procedure is used. If Your Vehicle Gets Stuck In Mud or Snow Note: Do not rock the vehicle if the engine is not at normal operating temperature or damage to the transmission may occur. Note: Do not rock the vehicle for more than a minute or damage to the transmission and tires may occur, or the engine may overheat. If your vehicle gets stuck in mud or snow, it may be rocked out by shifting between forward and reverse gears, stopping between shifts in a steady pattern. Press lightly on the accelerator in each gear.
153
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Four-Wheel Drive (If Equipped)
PRINCIPLE OF OPERATION
This system is a proactive system. It has the ability to anticipate wheel slip and transfer torque to the rear wheels before slip occurs. Even when wheel slip is not present, the system is continuously making adjustments to the torque distribution, in an attempt to improve straight line and cornering behavior, both on and off road.
The system automatically turns on every time you switch the ignition on.
All components of the system are sealed and do not require maintenance.
USING FOUR-WHEEL DRIVE
Note: When a system malfunction is present, a warning message will be displayed in the information display. See General Information (page 91). This means the system is not functioning correctly and has defaulted to front-wheel drive only. Have your vehicle checked by an authorized dealer.
Note: A message will be displayed in the information display when the system overheats and switches to front-wheel drive. This condition may occur if you operate your vehicle in extreme high load conditions or with excessive wheel slip, (i.e. deep sand). To resume four-wheel drive function as soon as possible, stop your vehicle in a safe location and switch the ignition off. After the system cools and normal four-wheel drive functionality resumes, a message will be displayed for approximately five seconds.
Note: If a warning message appears in the information display when using the spare tire, it should turn off after reinstalling the repaired or replaced road tire and you switch the ignition on.
Note: It is recommended that you reinstall the repaired tire or replace the tire as soon as possible. Major dissimilar tire sizes between the front and rear axles could cause system damage or default the system to front-wheel drive. The system gives your vehicle some limited off-road capabilities. Operating your vehicle in conditions other than moderate sand, snow, mud or rough roads could subject it to excessive stress and heat which could result in system damage. This will not be covered by your vehicle warranty.
E142669
A graphic will be displayed in the information display to advise you of the power distribution between the front and rear wheels. The more the area is filled the more power is being distributed to that wheel.
Driving in Special Conditions With Four-Wheel Drive
Four-wheel drive vehicles are suitable for driving on sand, snow, mud and rough roads and have operating characteristics that are somewhat different from conventional vehicles, both on and off the freeway. Note: It may be useful to switch Traction control off. This allows for more wheel spin and engine torque in certain off road conditions or if your vehicle becomes stuck.
154
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Four-Wheel Drive (If Equipped)
When driving at slow speeds off road under high load conditions, use a low gear when possible. Low gear operation will maximize the engine and transmission cooling capability.
Under severe operating conditions, the air conditioning may cycle on and off to prevent the engine from overheating.
Basic Operating Principles
· Drive slower in strong crosswinds which can affect the normal steering characteristics of your vehicle.
· When driving your vehicle on surfaces made slippery by loose sand, water, gravel, snow or ice proceed with care.
If Your Vehicle leaves the Road
If your vehicle leaves the road, reduce your vehicle speed and avoid severe braking. When your vehicle speed has been reduced ease your vehicle back onto the road. Do not turn the steering wheel sharply while returning your vehicle to the road.
It may be safer to stay on the shoulder of the road and slow down gradually before returning to the road. You may lose control if you do not slow down or if you turn the steering wheel too sharply or abruptly.
It may be less risky to strike small objects, such as freeway reflectors, with minor damage to your vehicle rather than attempt a sudden return to the road which could cause your vehicle to slide sideways out of control or roll over. Remember, your safety and the safety of others should be your primary concern.
Emergency Maneuvers
In an unavoidable emergency situation where a sudden sharp turn must be made, remember to avoid over-driving your vehicle (i.e. turn the steering wheel only as rapidly and as far as required to avoid the emergency). Excessive steering can result
in loss of vehicle control. Apply smooth pressure to the accelerator pedal or brake pedal when changes in vehicle speed are required. Avoid abrupt steering, acceleration and braking. This could result in an increased risk of vehicle roll over, loss of vehicle control and personal injury. Use all available road surface to bring your vehicle to a safe direction of travel.
In the event of an emergency stop, avoid skidding the tires and do not attempt any sharp steering wheel movements.
If your vehicle goes from one type of surface to another (i.e. from concrete to gravel) there will be a change in the way your vehicle responds to a maneuver (i.e. steering, acceleration or braking).
Sand
When driving over sand, try to keep all four wheels on the most solid area of the trail. Avoid reducing the tire pressures but shift to a lower gear and drive steadily through the terrain. Apply the accelerator slowly and avoid excessive wheel slip.
Do not drive your vehicle in deep sand for an extended period of time. This will cause the system to overheat. A message will be displayed in the information display. See General Information (page 91).
To resume operation, switch the ignition off and allow the system to cool down for a minimum of 15 minutes. After the system has cooled down, a message will be displayed briefly in the information display. See General Information (page 91).
When driving at slow speeds in deep sand under high outside temperatures, use a low gear when possible. Low gear operation will maximize the engine and transmission cooling capability.
155
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Four-Wheel Drive (If Equipped)
Avoid driving at excessive speeds, this causes vehicle momentum to work against you and your vehicle could become stuck to the point that assistance may be required from another vehicle. Remember, you may be able to back out the way you came if you proceed with caution.
Mud and Water
Mud
Be cautious of sudden changes in vehicle speed or direction when you are driving in mud. Even four-wheel drive vehicles can lose traction in slick mud. If your vehicle does slide, steer in the direction of the slide until you regain control of your vehicle.
After driving through mud, clean off residue stuck to rotating driveshafts and tires. Excess mud stuck on tires and rotating driveshafts can cause an imbalance that could damage drive components.
Water
If you must drive through high water, drive slowly. Traction or brake capability may be limited.
When driving through water, determine the depth and avoid water higher than the bottom of the wheel rims. If the ignition system gets wet, your vehicle may stall.
Once through water, always try the brakes. Wet brakes do not stop your vehicle as effectively as dry brakes. Drying can be improved by applying light pressure to the brake pedal while moving slowly.
Note: Driving through deep water may damage the transmission. If the front or rear axle is submerged in water, the axle lubricant and power transfer unit lubricant should be checked and changed if necessary.
Driving on Hilly or Sloping Terrain Although natural obstacles may make it necessary to travel diagonally up or down a hill or steep incline, you should always try to drive straight up or straight down. Note: Avoid turning on steep slopes or hills. A danger lies in losing traction, slipping sideways and possible vehicle roll over. Whenever driving on a hill, determine beforehand the route you will use. Do not drive over the crest of a hill without seeing what conditions are on the other side. Do not drive in reverse over a hill without the aid of an observer. When climbing a steep slope or hill, start in a lower gear rather than downshifting to a lower gear from a higher gear once the ascent has started. This reduces strain on the engine and the possibility of stalling. If your vehicle stalls, do not try to turn around because this could cause vehicle roll over. It is better to reverse back to a safe location. Apply just enough power to the wheels to climb the hill. Too much power will cause the tires to slip, spin or lose traction, resulting in loss of vehicle control.
E143949
156
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Four-Wheel Drive (If Equipped)
Descend a hill in the same gear you would use to climb up the hill to avoid excessive brake application and brake overheating. Do not descend in neutral. Disengage overdrive or move the transmission selector lever to a lower gear. When descending a steep hill, avoid sudden hard braking as you could lose control. The front wheels have to be turning in order to steer your vehicle.
Your vehicle has anti-lock brakes, therefore apply the brakes steadily. Do not pump the brake pedal.
Driving on Snow and Ice
WARNING
If you are driving in slippery conditions that require tire chains or cables, then it is critical that you drive cautiously. Keep speeds down, allow for longer stopping distances and avoid aggressive steering to reduce the chances of a loss of vehicle control which can lead to serious injury or death. If the rear end of your vehicle slides while cornering, steer in the direction of the slide until you regain control of your vehicle.
Note: Excessive tire slippage can cause transmission damage.
Four-wheel drive vehicles have advantages over two-wheel drive vehicles in snow and ice but can skid like any other vehicle. Should you start to slide while driving on snowy or icy roads, turn the steering wheel in the direction of the slide until you regain control.
Avoid sudden applications of power and quick changes of direction on snow and ice. Apply the accelerator slowly and steadily when starting from a full stop.
Avoid sudden braking. Although a four-wheel drive vehicle may accelerate better than a two-wheel drive vehicle in snow and ice, it will not stop any faster as braking occurs at all four wheels. Do not become overconfident as to road conditions.
Make sure you allow sufficient distance between you and other vehicles for stopping. Drive slower than usual and consider using one of the lower gears. In emergency stopping situations, apply the brake steadily. As your vehicle has a four wheel anti-lock brake system, do not pump the brake pedal. See Hints on Driving With Anti-Lock Brakes (page 159).
If Your Vehicle Gets Stuck In Mud or Snow
If your vehicle gets stuck in mud or snow, it may be rocked out by shifting between forward and reverse gears, stopping between shifts in a steady pattern. Press lightly on the accelerator in each gear.
Note: Do not rock your vehicle if the engine is not at normal operating temperature, damage to the transmission may occur.
Note: Do not rock your vehicle for more than a minute, damage to the transmission and tires may occur or the engine may overheat.
Maintenance and Modifications
The suspension and steering systems on your vehicle have been designed and tested to provide predictable performance whether loaded or empty. For this reason, we strongly recommend that you do not make modifications such as adding or removing parts (i.e. lift kits or stabilizer bars) or by using replacement parts not equivalent to the original factory equipment.
157
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Four-Wheel Drive (If Equipped)
We recommend that you use caution when your vehicle has either a high load or device (i.e. ladder or luggage racks). Any modifications to your vehicle that raise the center of gravity may cause your vehicle to roll over when there is a loss of vehicle control. Failure to maintain your vehicle correctly may void the warranty, increase your repair cost, reduce vehicle performance and operational capabilities and adversely affect you and your passenger's safety. We recommend you frequently inspect your vehicle's chassis components when your vehicle is subject to off road usage.
158
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Brakes
GENERAL INFORMATION
Note: Occasional brake noise is normal. If a metal-to-metal, continuous grinding or continuous squeal sound is present, the brake linings may be worn-out and an authorized dealer should check them. If the vehicle has continuous vibration or shudder in the steering wheel while braking, an authorized dealer should check your vehicle.
Note: Brake dust may accumulate on the wheels, even under normal driving conditions. Some dust is inevitable as the brakes wear and does not contribute to brake noise. See Cleaning the Wheels (page 271).
E138644
See Warning Lamps and Indicators (page 87).
Wet brakes result in reduced braking efficiency. Gently press the brake pedal a few times when driving from a car wash or standing water to dry the brakes.
Brake Over Accelerator
In the event the accelerator pedal becomes stuck or entrapped, apply steady and firm pressure to the brake pedal to slow the vehicle and reduce engine power. If you experience this condition, apply the brakes and bring your vehicle to a safe stop. Switch the engine off, move the transmission to park (P) and apply the parking brake. Inspect the accelerator pedal and the area around it for any items or debris that may be obstructing its movement.If none are found and the condition persists, have your vehicle towed to the nearest authorized dealer.
Emergency Brake Assist
Emergency brake assist detects when you brake heavily by measuring the rate at which you press the brake pedal. It provides maximum braking efficiency as long as you press the pedal. Emergency brake assist can reduce stopping distances in critical situations.
Anti-lock Brake System
This system helps you maintain steering control during emergency stops by keeping the brakes from locking.
This lamp momentarily illuminates when you switch the ignition on. If the light does not illuminate during start up, remains on or flashes, the anti-lock braking system may be disabled. Have the system checked by an authorized dealer. If the anti-lock brake system is disabled, normal braking is still effective.
If the brake warning lamp illuminates with the parking E138644 brake released, have your brake system serviced immediately.
It also illuminates momentarily when you switch the ignition on to confirm the lamp is functional. If it does not illuminate when you switch the ignition on, or begins to flash at any time, have the system checked by an authorized dealer.
HINTS ON DRIVING WITH ANTI-LOCK BRAKES
The anti-lock braking system does not eliminate the risks when:
· You drive too closely to the vehicle in front of you.
· Your vehicle is hydroplaning.
159
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Brakes
· You take corners too fast. · The road surface is poor.
Note: If the system activates, the brake pedal may pulse and may travel further. Maintain pressure on the brake pedal. You may also hear a noise from the system. This is normal.
PARKING BRAKE
WARNING
Always fully apply the parking brake and make sure you shift into park (P). Switch the ignition off and remove the key whenever you leave your vehicle.
To apply the parking brake:
1. Firmly press the brake pedal. 2. Pull the parking brake lever upward to
its fullest extent. Note: Do not press the release button when pulling the parking brake lever upward.
Note: If you park your vehicle on a hill and facing uphill, shift into park (P) and turn the steering wheel away from the curb.
Note: If you park your vehicle on a hill and facing downhill, shift into park (P) and turn the steering wheel toward the curb.
To release the parking brake:
1. Firmly press the brake pedal. 2. Slightly pull the parking brake lever
upward. 3. Press the release button and push the
parking brake lever downward.
ELECTRIC PARKING BRAKE
The electric parking brake replaces the conventional handbrake. The operating switch is on the center console.
WARNING
Always set the parking brake and leave your vehicle with the transmission in park (P).
Note: When you apply the electric parking brake in certain conditions, for example, on a steep hill, the electric parking brake may reapply the brakes within three to ten minutes.
Note: You may notice various noises when you apply and release the electric parking brake. This is normal and no cause for concern.
Applying the Electric Parking brake
WARNINGS
The brake system warning lamp will flash when applying the electric parking brake. If the brake system warning lamp continues to flash there could be a problem with your electric parking brake. Have your vehicle checked as soon as possible.
Applying the electric parking brake while moving will result in the engagement of the anti-lock braking system. Do not use the electric parking brake system when the vehicle is moving unless the normal brake system is unable to stop the vehicle.
With the exception of emergency conditions (for example, the brake pedal is broken or is blocked), do not apply the electric parking brake while the vehicle is moving. On bends, or poor road surfaces or weather conditions, emergency braking can cause the vehicle to skid out of control or off the road.
160
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Brakes
Note: The brake system warning lamp illuminates for ten seconds if you switch the ignition off after you apply the electric parking brake, or you apply the electric parking brake after you switch the ignition off.
Note: The electric parking brake will not automatically apply. You must apply the electric parking brake using the electric parking brake switch.
Releasing the Electric Parking Brake
You can release the electric parking brake either manually by pressing the switch or automatically.
Manual release
WARNING
If the brake system warning light remains illuminated or flashes for more than four seconds after you have released the parking brake, there could be a problem with your braking system. Have your vehicle checked as soon as possible.
E227395
Pull the switch up to apply the electric parking brake.
The brake system warning lamp flashes for about two seconds and then illuminates to confirm that you have applied the electric parking brake. See Information Displays (page 91).
If you apply the electric parking brake when your vehicle is moving, the brake system warning lamp illuminates and a warning tone sounds. See Information Displays (page 91).
If your vehicle speed is above 4 mph (6 km/h), the braking force is applied as long as you pull the switch. Releasing or pressing the switch or pressing the accelerator pedal stops the braking force.
E227515
You can manually release the electric parking brake by:
1. Switching the ignition on. 2. Pressing the brake pedal. 3. Pressing the electric parking brake
switch.
When the electric parking brake is released, the brake system warning lamp turns off.
161
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Brakes
Automatic release - drive away release
Your vehicle automatically releases the parking brake if all of the following conditions exist:
· The driver door is closed.
· The accelerator pedal is pressed.
· The transmission is in drive (D), reverse (R) or sport mode (S).
· There are no faults detected in the parking brake system.
Note: If the electric parking brake warning lamp stays illuminated, the electric parking brake will not automatically release. You must release the electric parking brake using the electric parking brake switch.
The brake system warning lamp goes off to confirm that you have released the electric parking brake.
Note: The electric parking brake drive away release makes starting on a hill easier. This feature releases the parking brake automatically when the vehicle has sufficient drive force to move up the hill. To assure drive away release when starting uphill, press the accelerator pedal quickly.
Driving with a Trailer
Depending on the slope and the weight of the trailer, your vehicle and trailer may roll backwards slightly when you start on a slope.
To prevent this from happening, do the following:
1. Pull the switch up and hold it in this position.
2. Drive your vehicle, then release the switch when you notice that the engine has developed sufficient driving force.
Battery With No Charge
WARNING
You will not be able to apply or release the electric parking brake if the battery is low or has no charge.
If the battery is low or has no charge, use jumper cables and a booster battery.
HILL START ASSIST
WARNINGS The system does not replace the parking brake. When you leave your vehicle, always apply the parking brake and shift the transmission into park (P) for automatic transmission or first gear for manual transmission.
You must remain in your vehicle when the system turns on. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. Failure to take care may result in the loss of control of your vehicle, serious personal injury or death.
Note: If the engine is revved excessively, or if a malfunction is detected, the system will be deactivated.
The system makes it easier to pull away when your vehicle is on a slope without the need to use the parking brake.
When the system is active, your vehicle will remain stationary on the slope for two to three seconds after you release the brake pedal. This allows you time to move your foot from the brake to the accelerator pedal. The brakes release automatically
162
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Brakes
when the engine has sufficient torque to prevent your vehicle from rolling down the grade. This is an advantage when pulling away on a slope, for example from a car park ramp, traffic lights or when reversing uphill into a parking space.
The system will activate automatically on any slope that will cause significant vehicle rollback. For vehicles with a manual transmission, you can switch this feature off using the information display. See Information Displays (page 91). The system will remain on or off depending on how it was last set.
Note: There is no warning lamp to indicate the system is either on or off.
Note: If your vehicle is equipped with Auto Hold, Hill Start Assist will not be available while Auto Hold is active.
Using Hill Start Assist
1. Bring your vehicle to a complete standstill. Keep the brake pedal pressed and select an uphill gear (for example, drive (D) or first (1) when facing uphill or reverse (R) when facing downhill).
2. If the sensors detect that your vehicle is on a slope, the system will activate automatically.
3. When you remove your foot from the brake pedal, your vehicle will remain on the slope without rolling away for about two or three seconds. This hold time will automatically be extended if you are in the process of driving off.
4. Drive off in the normal manner. The brakes will release automatically.
Switching the System On and Off
You can switch this feature on or off if your vehicle is equipped with a manual transmission and an information display. See General Information (page 91). The system remembers the last setting when you start your vehicle.
If your vehicle is not equipped with a manual transmission and an information display, you cannot turn the system on or off. When you switch the ignition on, the system automatically turns on.
163
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Traction Control
PRINCIPLE OF OPERATION
The traction control system helps avoid drive wheel spin and loss of traction.
If your vehicle begins to slide, the system applies the brakes to individual wheels and, when needed, reduces engine power at the same time. If the wheels spin when accelerating on slippery or loose surfaces, the system reduces engine power in order to increase traction.
USING TRACTION CONTROL
WARNING
The stability and traction control light illuminates steadily if the system detects a failure. Make sure you did not manually disable the traction control system using the information display controls or the switch. If the stability control and traction control light is still illuminating steadily, have the system serviced by an authorized dealer immediately. Operating your vehicle with the traction control disabled could lead to an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
The system automatically turns on each time you switch the ignition on.
If your vehicle is stuck in mud or snow, switching traction control off may be beneficial as this allows the wheels to spin.
Note: When you switch traction control off, stability control remains fully active.
Switching the System Off
When you switch the system off or on, a message appears in the information display showing system status.
You can switch the system off by either using the information display controls or the switch.
Using the Information Display Controls
You can switch this feature off or on in the information display. See General Information (page 91).
Using a Switch (If Equipped)
Use the traction control switch on the instrument panel to switch the system off or on.
System Indicator Lights and Messages
E138639
The stability and traction control light:
· Temporarily illuminates on engine start-up.
· Flashes when a driving condition activates either of the systems.
· Illuminates if a problem occurs in either of the systems.
The stability and traction control off light temporarily illuminates E130458 on engine start-up and stays on when you switch the traction control system off.
164
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Stability Control
PRINCIPLE OF OPERATION
WARNINGS
Vehicle modifications involving braking system, aftermarket roof racks, suspension, steering system, tire construction and wheel and tire size may change the handling characteristics of your vehicle and may adversely affect the performance of the electronic stability control system. In addition, installing any stereo loudspeakers may interfere with and adversely affect the electronic stability control system. Install any aftermarket stereo loudspeaker as far as possible from the front center console, the tunnel, and the front seats in order to minimize the risk of interfering with the electronic stability control sensors. Reducing the effectiveness of the electronic stability control system could lead to an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
Remember that even advanced technology cannot defy the laws of physics. It's always possible to lose control of a vehicle due to inappropriate driver input for the conditions. Aggressive driving on any road condition can cause you to lose control of your vehicle increasing the risk of personal injury or property damage. Activation of the electronic stability control system is an indication that at least some of the tires have exceeded their ability to grip the road; this could reduce the operator's ability to control the vehicle potentially resulting in a loss of vehicle control, vehicle rollover, personal injury and death. If your electronic stability control system activates, SLOW DOWN.
The system automatically turns on each time you switch the ignition on.
If a fault occurs in either the stability control or the traction control system, you may experience the following conditions:
· The stability and traction control light illuminates steadily.
· The stability control and traction control systems do not enhance your vehicle's ability to maintain traction of the wheels.
If a driving condition activates either the stability control or the traction control system you may experience the following conditions:
· The stability and traction control light flashes.
· Your vehicle slows down.
· Reduced engine power.
· A vibration in the brake pedal.
· The brake pedal is stiffer than usual.
· If the driving condition is severe and your foot is not on the brake, the brake pedal may move as the system applies higher brake force.
The stability control system has several features built into it to help you maintain control of your vehicle:
Electronic Stability Control
The system enhances your vehicle's ability to prevent skids or lateral slides by applying brakes to one or more of the wheels individually and, if necessary, reducing engine power.
Roll Stability Control
The system enhances your vehicle's ability to prevent rollovers by detecting your vehicle's roll motion and the rate at which it changes by applying the brakes to one or more wheels individually.
165
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Stability Control
Traction Control The system enhances your vehicle's ability to maintain traction of the wheels by detecting and controlling wheel spin. See Using Traction Control (page 164).
B
B
B
A
A
B
A
E72903
A B
Vehicle without stability control skidding off its intended route.
Vehicle with stability control maintaining control on a slippery surface.
USING STABILITY CONTROL
The system automatically turns on each time you switch the ignition on.
You cannot switch the stability control and roll stability control systems off, but when you shift into reverse (R), the systems deactivate.
You can switch the traction control system off or on. See Using Traction Control (page 164).
166
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
PRINCIPLE OF OPERATION
WARNINGS
To help avoid personal injury, always use caution when in reverse (R) and when using the sensing system.
The system may not detect objects with surfaces that absorb reflection. Always drive with due care and attention. Failure to take care may result in a crash.
Traffic control systems, inclement weather, air brakes, external motors and fans may affect the correct operation of the sensing system.This may cause reduced performance or false alerts.
The system may not detect small or moving objects, particularly those close to the ground.
Note: If your vehicle is equipped with MyKeyTM, the sensing system cannot be turned off when a MyKeyTM is present. See Principle of Operation (page 52).
Note: Keep the sensors, located on the bumper or fascia, free from snow, ice and large accumulations of dirt. If the sensors are covered, the system's accuracy can be affected. Do not clean the sensors with sharp objects.
Note: If your vehicle sustains damage to the bumper or fascia, leaving it misaligned or bent, the sensing zone may be altered causing inaccurate measurement of obstacles or false alerts.
Note: Certain add-on devices installed around the bumper or fascia may create false alerts. For example, large trailer hitches, bike or surfboard racks, license plate brackets, bumper covers or any other device that may block the normal detection zone of the system. Remove the add-on device to prevent false alerts.
Note: When a trailer is connected to your vehicle, the rear parking aid may detect the trailer and therefore provide an alert. Disable the rear parking aid when a trailer is connected to prevent the alert.
The sensing system warns the driver of obstacles within a certain range of your vehicle. The system turns on automatically whenever you switch the ignition on.
The system can be switched off through the information display menu or from the pop-up message that appears once you shift the transmission into reverse (R). See General Information (page 91).
If a fault is present in the system, a warning message appears in the information display. See Information Messages (page 95).
REAR PARKING AID (If Equipped)
The rear sensors are only active when the transmission is in reverse (R). As your vehicle moves closer to the obstacle, the rate of the audible warning increases. When the obstacle is less than 12 in (30 cm) away, the warning sounds continuously. If the system detects a stationary or receding object farther than 12 in (30 cm) from the corners of the bumper, the tone sounds for only three seconds. Once the system detects an object approaching, the warning sounds again.
167
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
E130178
Coverage area of up to 6 ft (1.8 m) from the rear bumper. There may be decreased coverage area at the outer corners of the bumper.
The system detects certain objects while the transmission is in reverse (R) :
· Your vehicle is moving toward a stationary object at a speed of 3 mph (5 km/h) or less.
· Your vehicle is not moving, but a moving object is approaching the rear of your vehicle at a speed of 3 mph (5 km/h) or less.
· Your vehicle is moving at a speed of less than 3 mph (5 km/h) and a moving object is approaching the rear of your vehicle at a speed of less than 3 mph (5 km/h).
The system provides audio warnings only when your vehicle is moving or when your vehicle is stationary and the detected obstacle is less than 12 in (30 cm) away from the bumper.
Obstacle Distance Indicator (If
Equipped)
The system provides obstacle distance indication through the information display. The distance indicator displays when the transmission is in reverse (R). The indicator displays: · As the distance to the obstacle
decreases the indicator blocks illuminate and move towards the vehicle icon. · If there is no obstacle detected, the distance indicator blocks are grayed out.
FRONT PARKING AID (If Equipped)
The front sensors are active when the transmission is in any position other than park (P) and your vehicle is traveling at low speed.
E187330
Coverage area of up to 28 in (70 cm) from the front bumper. The coverage area decreases at the outer corners. When your vehicle approaches an object, a warning tone sounds. When your vehicle moves closer to an object, the warning tone repeat rate increases. The warning tone sounds continuously when an object is 12 in (30 cm) or less from the front bumper.
168
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
You can switch the system off through the information display menu or from the pop-up message that appears once you shift the transmission into reverse (R). See General Information (page 91). If your vehicle has a parking aid button, you can switch the system off by pressing the button.
Obstacle Distance Indicator (If
Equipped)
The system provides obstacle distance indication through the information display.
The indicator displays:
· As the distance to the obstacle decreases the indicator blocks illuminate and move towards the vehicle icon.
· If there is no obstacle detected, the distance indicator blocks are grayed out.
If the transmission is in reverse (R), the front sensing system provides audio warnings when your vehicle is moving and the detected obstacle is moving towards your vehicle. Once the vehicle is stationary, the audio warning will be stopped after 2 seconds. Visual indication is always present in reverse (R).
If the transmission is in drive (D) or any other forward gear (for example, low (L), sport (S) or any forward gear in a manual transmission), the front sensing system provides audio and visual warnings when your vehicle is moving below a speed of 5 mph (8 km/h) and an obstacle is located inside the detection area. Once the vehicle is stationary, the audio warning will be stopped after 2 seconds and the visual indication stops after 4 seconds. If the obstacles detected are within 12 in (30 cm), the visual indication remains on.
If the transmission is in neutral (N), the system provides visual indication only when your vehicle is moving at 5 mph (8 km/h) or below and an obstacle is located inside the detection area. Once your vehicle is stationary, the visual indication will stop after 4 seconds.
SIDE SENSING SYSTEM (If
Equipped)
The side sensing system uses the front and rear side sensors to detect and map obstacles within the vehicle's driving path, located near the sides of your vehicle. The side sensors are active when the transmission is in any position other than park (P). Note: Obstacles that enter the side detection area without being detected and mapped by the front or rear side sensors will not be detected.
E187810
Coverage area is up to 24 in (60 cm) from the sides of your vehicle. When the system detects an object close to the side of your vehicle, an audible warning sounds. As your vehicle moves closer to obstacles within the driving path of your vehicle, the rate of the audible warning increases.
169
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
Obstacle Distance Indicator (If
Equipped)
E190459
The system provides obstacle distance indication through the information display. As the distance to the obstacle decreases, the indicator blocks illuminate and move toward the vehicle icon. If there is no obstacle detected, the distance indicator blocks show greyed out. When you shift to reverse (R), the side sensing system provides audible warnings when your vehicle is moving and obstacles are detected within 24 in (60 cm) and are inside the driving path of your vehicle. When you stop your vehicle the audible warning stops after two seconds. Note: Visual distance indication remains on when the transmission is in reverse (R). When you shift to drive (D) or any other forward gear, for example, low (L), sport (S) or any forward gear in manual transmission, the side sensing system provides audible and visual distance warnings when your vehicle is moving below a speed of 5 mph (8 km/h) and
obstacles are detected within 24 in (60 cm) and are inside the driving path of your vehicle. Once your vehicle reaches a standstill condition, the audible warning stops after two seconds and visual indication stops after four seconds.
If the transmission is in neutral (N), the side sensing system provides visual distance indication only when your vehicle is moving below a speed of 5 mph (8 km/h) and there is a front or rear parking aid obstacle detected, and the side obstacle is within 24 in (60 cm) from the side of your vehicle. When you stop your vehicle the visual distance indication stops after four seconds.
If the side sensing system is not available, the side distance indicator blocks do not appear.
The side sensing system is not available under the following condition:
· If you switch the traction control system off.
The side sensing system may not be available until you have driven approximately the length of your vehicle in order for the system to reinitialize if:
· You switch the ignition on, off and back on.
· Your vehicle remains stationary for over two minutes.
· The anti-lock brake system is activated.
· The traction control system is activated.
· When the steering wheel angle information is not available, the side sensing system is not available. The vehicle must be driven at least 492 ft (150 m) above 19 mph (30 km/h) to recover the steering wheel angle information.
170
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
ACTIVE PARK ASSIST (If Equipped)
Parallel Parking, Perpendicular Parking, Parallel Park Out Assist
WARNINGS You must remain in your vehicle when the system turns on. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. Failure to take care may result in the loss of control of your vehicle, serious personal injury or death.
The sensors may not detect objects in heavy rain or other conditions that cause interference.
Active park assist does not apply the brakes under any circumstances.
The system is designed to aid the driver. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention.
Note: Active Park Assist is a multi-step process and may require you to shift your transmission multiple times. Follow the on-screen instructions until you complete the parking process.
Note: The Blind Spot Information System does not detect traffic alongside or behind your vehicle during an Active Park Assist maneuver.
The system detects an available parallel or perpendicular parking space and automatically steers your vehicle into the space (hands-free) while you control the accelerator, gearshift and brakes. The system visually and audibly guides you to park your vehicle.
If you are uncomfortable with the proximity to any vehicle or object, you may choose to override the system by grabbing the steering wheel or by pressing the button.
Parallel Park Out Assist automatically steers your vehicle out of a parallel parking space (hands-free) while you control the accelerator, gearshift and brakes. The system visually and audibly guides you to enter traffic.
The system may not correctly operate in any of the following conditions:
· You use a spare tire or a tire significantly worn more than the other tires.
· One or more tires are improperly inflated.
· You try to park on a tight curve.
· Something passes between the front bumper and the parking space. For example, a pedestrian or cyclist.
· The edge of the neighboring parked vehicle is high off the ground. For example, a bus, tow truck or flatbed truck.
· The weather conditions are poor. For example, during heavy rain, snow or fog.
Note: Keep the sensors on the bumper or fascia free from snow, ice and large accumulations of dirt. Covered sensors can affect the system's accuracy. Do not clean the sensors with sharp objects.
Note: The sensors may not detect objects with surfaces that absorb ultrasonic waves or cause ultrasonic interference. For example, motorcycle exhaust, truck air brakes or horns.
Note: Following a change in tire size, the system must recalibrate and operation may be impaired for a short time.
171
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
Do not use the system if:
· You have attached a foreign object close to the sensors on the front or rear of your vehicle. For example, a bike rack or trailer.
· You attach an overhanging object to the roof. For example, a surfboard.
· A foreign object damages or obstructs the front or rear bumper or side sensors.
· The correct tire size is not in use on your vehicle. For example, a mini-spare tire.
Using Active Park Assist - Parallel Parking
E146186
Press the Active Park Assist button once to search for a parallel parking space.
When driving at a speed less than 22 mph (35 km/h), the system automatically scans both sides of your vehicle for an available parking space. The system displays a message and a corresponding graphic to indicate it is searching for a parking space. Use the direction indicator to select searching either to the left-hand side or right-hand side of your vehicle.
Note: If the direction indicators are not used, the system defaults to the passenger side of your vehicle.
E130107
Note: You can also switch the system on after you have already driven partially or completely past a parking space. Press the Active Park Assist button and the system informs you if you have recently passed a suitable parking space.
When the system finds a suitable space, it displays a message and a tone sounds. Stop your vehicle and follow the instructions on the screen. If your vehicle is moving very slowly, you may need to pull forward a short distance before the system is ready to park.
Note: You must observe that the space the system selects remains clear of obstructions at all times during the maneuver.
Note: Drive your vehicle within 5 ft (1.5 m) and as parallel as possible to the other vehicles while passing a parking space.
Note: The system always offers the last parking space it detects. For example, if your vehicle detects multiple spaces while you are driving, it offers the last one.
Note: If driven above approximately 22 mph (35 km/h), the system shows a message to alert you to reduce your vehicle speed.
172
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
Automatically Steering into a Parking Space
Note: If your vehicle speed exceeds approximately 6 mph (10 km/h) or you interrupt the maneuver, the system switches off and you need to take full control of your vehicle.
When you shift the transmission into reverse (R), with your hands off the steering wheel and nothing obstructing its movement, your vehicle steers itself into the space (hands-free). The system displays instructions to move your vehicle backward and forward in the space.
E130108
When you believe your vehicle is properly parked, or you hear a solid tone accompanied by a display message, bring your vehicle to a complete stop.
When the Active Park Assist maneuver is complete, the system displays a message and a tone sounds.
Note: You are responsible for checking your parked vehicle and making any necessary corrections before leaving your vehicle.
Using Active Park Assist Perpendicular Parking
E146186
Press the Active Park Assist button twice to search for a perpendicular parking space.
When driving at a speed less than 19 mph (30 km/h), the system displays a message and a corresponding graphic to indicate it is searching for a parking space. Use the direction indicator to select searching either to the left-hand side or right-hand side of your vehicle.
Note: If you do not make a selection, the system defaults to the passenger side.
E186193
173
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
When the system finds a suitable space, it displays a message and a tone sounds. Stop your vehicle and follow the instructions on the screen. If your vehicle is moving very slowly, you may need to pull forward a short distance before the system is ready to park.
Note: You must observe that the space the system selects remains clear of obstructions at all times during the maneuver.
Note: You should drive your vehicle within 5 ft (1.5 m) and as perpendicular as possible to the other vehicles while passing a parking space.
Note: The system always offers the last detected parking space. For example, if your vehicle detects multiple spaces while you are driving, it offers the last one.
Note: If driven above approximately 19 mph (30 km/h), the system shows a message to alert you to reduce your vehicle speed.
Automatically Steering into a Parking Space
Note: If your vehicle speed exceeds approximately 6 mph (10 km/h) or you interrupt the maneuver, the system switches off and you need to take full control of your vehicle.
E186191
When you shift the transmission into reverse (R), with your hands off the wheel and nothing obstructing its movement, your vehicle steers itself into the space. The system displays instructions to move your vehicle backward and forward in the space.
When you believe your vehicle is properly parked, or you hear a solid tone accompanied by a display message, bring your vehicle to a complete stop.
When the Active Park Assist maneuver is complete, the system displays a message and a tone sounds.
Note: You are responsible for checking your parked vehicle and making any necessary corrections before leaving your vehicle.
Using Active Park Assist - Parallel Park Out Assist
Press the Active Park Assist button once while your vehicle E146186 is at rest in a parallel parking space to use Parallel Park Out Assist.
The system displays a message instructing you to select a side. Use the direction indicator to select which side of your vehicle you want to exit the parking space.
174
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
E188012
The system determines the clearance to the front and rear of your vehicle and automatically steers your vehicle out of a parallel parking space (hands-free) while you control the accelerator, gearshift and brakes. The system visually and audibly guides you to enter traffic.
After the system directs your vehicle past the adjacent vehicle or object, it guides you to take control of the steering to complete the exit out of the parking space.
Note: If the clearance in front of your vehicle allows easy departure, the Parallel Park Out Assist feature may not be available.
Note: You are responsible for controlling your vehicle and making sure the path is clear prior to pulling into traffic.
Note: Do not use this system to assist in exiting perpendicular parking spaces. Damages to your vehicle may occur.
Note: If your vehicle speed exceeds approximately 3 mph (5 km/h) or you interrupt the maneuver, the system switches off and you need to take full control of your vehicle.
Deactivating the Active Park Assist Feature
You can manually deactivate the system by:
· Pressing the Active Park Assist button during an active maneuver.
· Grabbing the steering wheel during an active maneuver.
· Driving above approximately 22 mph (35 km/h) for 30 seconds while searching for a parking space.
· Driving above approximately 6 mph (10 km/h) during an active maneuver.
· Switching the traction control system off.
Certain vehicle conditions may also deactivate the system, for example:
· The traction control system activates.
· There is an anti-lock brake system activation or failure.
If a problem occurs with the system, a warning message displays accompanied by a tone. Occasional system messages may occur in normal operation. For recurring or frequent system faults, contact an authorized dealer.
175
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
Troubleshooting the System
Symptom
Possible Cause
You may have the traction control system switched off.
The system does not look for a
space.
The transmission is in reverse (R). Your vehicle must
be moving forward to be able to detect a parking space.
The sensors may be covered. For example, snow, ice or dirt buildup. Covered sensors can affect how the system functions.
There is not enough room in the parking space for your vehicle to safely park.
The system does not offer a parking space.
There is not enough space for the parking maneuver on the opposite side of the parking space.
The parking space is more than 5 ft (1.5 m) or less than 16 in (0.4 m) away.
Your vehicle speed is greater than 22 mph (35 km/h) for parallel parking, or greater than 19 mph (30 km/h) for perpendicular parking.
You recently disconnected or replaced the battery. After a battery disconnect, you must drive your vehicle on a straight road for a short period of time.
Your vehicle is rolling in the opposite direction of the current transmission position. For example, rolling forward when in reverse (R).
An irregular curb along the parking space prevents the system from aligning your vehicle properly.
The system does not position the vehicle correctly.
Improperly parked vehicles or objects are boarding the space.
Your vehicle is too far past the parking space. The system performs best when you drive the same distance past the parking space.
You have incorrectly installed or maintained the tires. For example, not inflated correctly, improper size, or of different sizes.
A repair or alteration changes the detection capabilities.
176
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
Symptom
Possible Cause
A parked vehicle has a high attachment. For example, a salt sprayer, snowplow or moving truck bed.
The parking space length or position of parked objects changes after your vehicle passes the space.
The temperature around your vehicle quickly changes. For example, driving from a heated garage into the cold, or after leaving a car wash.
REAR VIEW CAMERA
WARNINGS
The rear view camera system is a reverse aid supplement device that still requires the driver to use it in conjunction with the interior and exterior mirrors for maximum coverage.
Objects that are close to either corner of the bumper or under the bumper, might not be seen on the screen due to the limited coverage of the camera system.
Back up as slow as possible since higher speeds might limit your reaction time to stop your vehicle.
Use caution when using the rear video camera and the luggage compartment door is ajar. If the luggage compartment door is ajar, the camera will be out of position and the video image may be incorrect. All guidelines disappear when the luggage compartment door is ajar.
Use caution when turning camera features on or off. Make sure your vehicle is not moving.
During operation, lines appear in the display which represent your vehicle's path and proximity to objects behind your vehicle.
E142435
The camera is located on the luggage compartment door. Using the Rear View Camera System The rear view camera system displays what is behind your vehicle when you place the transmission in reverse (R). Note: The reverse sensing system is not effective at speeds above 6 mph (10 km/h) and may not detect certain angular or moving objects.
The rear view camera system provides a video image of the area behind your vehicle.
177
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
The system uses three types of guides to help you see what is behind your vehicle:
· Active guidelines: Show the intended path of your vehicle when reversing.
· Fixed guidelines: Show the actual path your vehicle is moving in while reversing in a straight line. This can be helpful when backing into a parking space or aligning your vehicle with another object behind you.
· Centerline: Helps align the center of your vehicle with an object (for example, a trailer).
Note: If the transmission is in reverse (R) and the luggage compartment door or liftgate is open, no rear view camera features will display.
Note: When towing, the camera only sees what you are towing. This might not provide adequate coverage as it usually provides in normal operation and some objects might not be seen. In some vehicles, the guidelines may disappear when you connect the trailer tow connector.
The camera may not operate correctly under the following conditions:
· Nighttime or dark areas if one or both reverse lamps are not operating.
· Mud, water or debris obstructs the camera's view. Clean the lens with a soft, lint-free cloth and non-abrasive cleaner.
· The rear of your vehicle is hit or damaged, causing the camera to become misaligned.
Camera Guidelines
Note: Active guidelines are only available when the transmission is in reverse (R).
Note: Upon a battery disconnect, the active guidelines may not be functional until your vehicle has been driven a short distance and exceeds a speed of 12 mph (20 km/h).
A
BC D E
F
E142436
A Active guidelines B Centerline C Fixed guideline: Green zone D Fixed guideline: Yellow zone E Fixed guideline: Red zone F Rear bumper
Active guidelines are only shown with fixed guidelines. To use active guidelines, turn the steering wheel to point the guidelines toward an intended path. If you change the steering wheel position while reversing, your vehicle might deviate from the original intended path.
178
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Parking Aids
The fixed and active guidelines fade in and out depending on the steering wheel position. The active guidelines do not display when the steering wheel position is straight.
Always use caution while reversing. Objects in the red zone are closest to your vehicle and objects in the green zone are farther away. Objects are getting closer to your vehicle as they move from the green zone to the yellow or red zones. Use the side view mirrors and rear view mirror to get better coverage on both sides and rear of the vehicle.
Manual Zoom
WARNING
When manual zoom is on, the full area behind your vehicle may not show. Be aware of your surroundings when using the manual zoom feature.
Note: Manual zoom is only available when the transmission is in reverse (R).
Note: When you enable manual zoom, only the centerline is shown.
Selectable settings for this feature are Zoom in (+) and Zoom out (-). Press the symbol in the camera screen to change the view. The default setting is Zoom OFF.
This allows you to get a closer view of an object behind your vehicle. The zoomed image keeps the bumper in the image to provide a reference. The zoom is only active while the transmission is in reverse (R).
Camera System Settings
The rear view camera system settings can be accessed through the display screen. See General Information (page 91).
Obstacle Distance Indicator
E190459
The system uses red, yellow and green highlights that appear on top of the video image when any of the sensing systems detect an object. Rear Camera Delay Selectable settings for this feature are ON and OFF. The default setting for the rear camera delay is OFF. When shifting the transmission out of reverse (R) and into any gear other than park (P) while the Delay Mode is ON, the camera image remains in the display until: · Your vehicle speed sufficiently
increases. · You shift your vehicle into park (P) on
vehicles with automatic transmission. · You enable the hand brake on vehicles
with manual transmission.
179
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Cruise Control
PRINCIPLE OF OPERATION
Cruise control lets you maintain a set speed without keeping your foot on the accelerator pedal. You can use cruise control when your vehicle speed is greater than 20 mph (30 km/h).
USING CRUISE CONTROL
WARNINGS Do not use cruise control on winding roads, in heavy traffic or when the road surface is slippery. This could result in loss of vehicle control, serious injury or death. When you are going downhill, your vehicle speed could increase above the set speed. The system does not apply the brakes.
Note: Cruise control disengages if the vehicle speed decreases more than 10 mph (16 km/h) below the set speed when driving uphill.
E144500
The cruise controls are on the steering wheel. Switching Cruise Control On Press ON.
E71340
The indicator displays in the instrument cluster.
Setting the Cruise Speed
1. Drive to desired speed. 2. Press SET+ or SET-. 3. Take your foot off the accelerator
pedal. Note: The indicator changes color.
Changing the Set Speed
Note: If you accelerate by pressing the accelerator pedal, the set speed will not change. When you release the accelerator pedal, your vehicle returns to the speed that you previously set.
· Press SET+ or SET- to change the set speed in small increments.
· Press the accelerator or brake pedal until you reach the desired speed. Press SET+ or SET-.
· Press and hold SET+ or SET-. Release the control when you reach the desired speed.
Canceling the Set Speed
Press CAN or tap the brake pedal. The set speed does not erase.
Resuming the Set Speed Press RES.
Switching Cruise Control Off
Note: You erase the set speed when you switch the system off.
Press OFF when the system is in standby mode, or switch the ignition off.
180
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Cruise Control
USING ADAPTIVE CRUISE CONTROL (If Equipped)
WARNINGS
Always pay close attention to changing road conditions when using adaptive cruise control. The system does not replace attentive driving. Failing to pay attention to the road may result in a crash, serious injury or death.
Do not use the adaptive cruise control when entering or leaving a highway, on roads with intersections or roundabouts or non-vehicular traffic or roads that are winding, slippery, unpaved, or steep slopes.
Do not use the system in poor visibility, for example fog, heavy rain, spray or snow.
Do not use the system when towing a trailer with aftermarket trailer brake controls. Aftermarket trailer brakes will not function properly when you switch the system on because the brakes are electronically controlled. Failing to do so may result in loss of vehicle control, which could result in serious injury.
Do not use tire sizes other than those recommended because this can affect the normal operation of the system. Failure to do so may result in a loss of vehicle control, which could result in serious injury.
Adaptive cruise control may not detect stationary or slow moving vehicles below 6 mph (10 km/h).
Adaptive cruise control does not detect pedestrians or objects in the road.
Adaptive cruise control does not detect oncoming vehicles in the same lane.
WARNINGS Adaptive cruise control is not a crash warning or avoidance system.
Note: It is your responsibility to stay alert, drive safely and be in control of the vehicle at all times.
The system adjusts your vehicle speed to maintain the set gap between you and the vehicle in front of you in the same lane. You can select four gap settings.
The system uses a radar sensor that projects a beam directly in front of your vehicle.
E223551
The adaptive cruise controls are on the steering wheel.
Switching Adaptive Cruise Control On
Press the cruise control button.
E144529
The indicator, current gap setting and set speed appear in the information display.
181
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Cruise Control
E247590
Setting the Adaptive Cruise Speed
Note: When adaptive cruise control is active, the speedometer may vary slightly from the set speed displayed in the information display.
1. Drive to desired speed.
2. Press SET-.
3. A green indicator light, the current gap setting and your set speed appear in the information display.
4. Take your foot off the accelerator pedal.
5. A vehicle image illuminates if the system detects a vehicle in front of you.
Following a Vehicle
WARNINGS When following a vehicle, your vehicle does not decelerate automatically to a stop, nor does your vehicle always decelerate quickly enough to avoid a crash without driver intervention. Always apply the brakes when necessary. Failing to do so may result in a crash, serious injury or death.
Adaptive cruise control only warns of vehicles detected by the radar sensor. In some cases there may be no warning or a delayed warning. You should always apply the brakes when necessary. Failure to do so may result in a crash, serious injury or death.
Note: When you are following a vehicle and you switch on a direction indicator, adaptive cruise control may provide a small temporary acceleration to help you pass.
Note: The brakes may emit noise when applied by the system.
When a vehicle ahead of you enters the same lane or a slower vehicle is ahead in the same lane, the vehicle speed adjusts to maintain a preset gap distance. A vehicle graphic illuminates in the instrument cluster.
Your vehicle maintains a consistent gap from the vehicle ahead until:
· The vehicle in front of you accelerates to a speed above the set speed.
· The vehicle in front of you moves out of the lane you are in.
· The vehicle speed falls below 10 mph (20 km/h).
· You set a new gap distance.
The system applies the brakes to slow your vehicle to maintain a safe gap distance from the vehicle in front. The system only applies limited braking. You can override the system by applying the brakes.
If the system determines that its maximum braking level is not sufficient, an audible warning sounds when the system continues to brake. A red warning bar displays on the windshield and you must take immediate action.
Setting the Gap Distance
Note: The gap setting is time dependent and therefore the distance adjusts with your vehicle speed.
Note: It is your responsibility to select a gap appropriate to the driving conditions.
You can decrease or increase the distance between your vehicle and the vehicle in front by pressing the gap control.
182
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Cruise Control
E224044
A B
E247590
Gap decrease.
Gap increase.
The selected gap appears in the information display as shown by the bars in the image.
Adaptive Cruise Control Gap Settings
Graphic display, bars indicated between vehicles
1
2
3
4
Dynamic behavior
Sport. Normal. Normal. Comfort.
Each time you switch the system on, it selects the last chosen gap setting.
Overriding the Set Speed
WARNING
If you override the system by pressing the accelerator pedal, it does not automatically apply the brakes to maintain a gap from any vehicle ahead.
When you press the accelerator pedal, you override the set speed and gap distance.
When you override the system, the green indicator light E144529 illuminates and the vehicle image does not appear in the information display.
The system resumes operation when you release the accelerator pedal. The vehicle speed decreases to the set speed, or a lower speed if following a slower vehicle.
Changing the Set Speed
· Press RES+ or SET- to change the set speed in small increments.
· Press the accelerator or brake pedal until you reach the desired speed. Press RES+ or SET-.
· Press and hold RES+ or SET- to change the set speed in large increments. Release the control when you reach the desired speed.
The system may apply the brakes to slow the vehicle to the new set speed. The set speed displays continuously in the information display when the system is active.
Canceling the Set Speed
Press CAN or tap the brake pedal. The set speed does not erase.
Resuming the Set Speed
Note: Only use resume if you are aware of the set speed and intend to return to it.
Press RES+. Your vehicle speed returns to the previously set speed and gap setting. The set speed displays continuously in the information display when the system is active.
183
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Cruise Control
Automatic Cancellation
Note: If the engine speed drops too low, an audible warning sounds and a message appears in the information display. Automatic braking releases.
The system does not operate below 12 mph (20 km/h).
Automatic cancellation can also occur if:
· The tires lose traction.
· The engine speed is too low.
· You apply the parking brake.
Hilly Condition Usage
Note: An audible alarm sounds and the system shuts down if it applies brakes for an extended period of time. This allows the brakes to cool. The system functions normally again after the brakes cool.
Select a lower gear when the system is active in situations such as prolonged downhill driving on steep grades, for example in mountainous areas. The system needs additional engine braking in these situations to reduce the load on the vehicle's regular brake system to prevent it from overheating.
Switching Adaptive Cruise Control Off
Note: You erase the set speed and gap setting when you switch the system off.
Press the cruise control button when the system is in standby mode, or switch the ignition off.
Detection Issues
WARNINGS On rare occasions, detection issues can occur due to the road infrastructures, for example bridges, tunnels and safety barriers. In these cases, the system may brake late or unexpectedly. At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required.
If the system malfunctions, have your vehicle checked as soon as possible.
The radar sensor has a limited field of view. It may not detect vehicles at all or detect a vehicle later than expected in some situations. The lead vehicle graphic does not illuminate if the system does not detect a vehicle in front of you.
184
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Cruise Control
In these cases, the system may brake late or unexpectedly. You should stay alert and take action when necessary. If something hits the front end of your vehicle or damage occurs, the radar-sensing zone may change. This could cause missed or false vehicle detection.
System Not Available
The system may not turn on if there is: · A blocked sensor. · High brake temperature. · A failure in the system or a related
system.
Blocked Sensor
E71621
Detection issues can occur:
A When driving on a different line than the vehicle in front.
B With vehicles that edge into your lane. The system can only detect these vehicles once they move fully into your lane.
C There may be issues with the detection of vehicles in front when driving into and coming out of a bend or curve in the road.
E145632
Note: You cannot see the sensor. It is behind a fascia panel.
A message displays if something obstructs the radar signals from the sensor. The sensor is in the lower grille. The system cannot detect a vehicle ahead and does not function when something blocks the sensor.
185
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Cruise Control
Possible Causes and Actions for This Message Displaying:
Cause
Action
The surface of the radar is dirty or obstructed.
Clean the grille surface in front of the radar or remove the object causing the obstruction.
The surface of the radar is clean but the message remains in the display.
Wait a short time. It may take several minutes for the radar to detect that it is free from obstruction.
Heavy rain or snow is interfering with the radar signals.
Do not use the system in these conditions because it may not detect any vehicles ahead.
Water, snow or ice on the surface of the Do not use the system in these conditions road may interfere with the radar signals. because it may not detect any vehicles
ahead.
You are in a desert or remote area with no Wait a short time or switch to normal cruise other vehicles and no roadside objects. control.
Due to the nature of radar technology, it is possible to get a blockage warning with no actual block. This happens, for example, when driving in sparse rural or desert environments. A false blocked condition either self clears, or clears after you restart your vehicle.
Switching to Normal Cruise Control
WARNING
Normal cruise control will not brake when your vehicle is approaching slower vehicles. Always be aware of which mode you have selected and apply the brakes when necessary.
The cruise control indicator light
replaces the adaptive cruise
E71340
control indicator light if you
select normal cruise control. The gap
setting does not display, and the system
does not respond to lead vehicles.
Automatic braking remains active to
maintain set speed.
You can change from adaptive cruise control to normal cruise control through the information display.
186
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
DRIVER ALERT (If Equipped)
PRINCIPLE OF OPERATION
WARNINGS You are responsible for controlling your vehicle at all times. The system is designed to be an aid and does not relieve you of your responsibility to drive with due care and attention. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
The system may not function if the sensor is blocked.
Take regular rest breaks if you feel tired. Do not wait for the system to warn you.
Certain driving styles may result in the system warning you even if you are not feeling tired.
In cold and severe weather conditions the system may not function. Rain, snow and spray can all limit sensor performance.
The system will not operate if the sensor cannot track the road lane markings.
If damage occurs in the immediate area surrounding the sensor, have your vehicle checked as soon as possible.
The system may not correctly operate if your vehicle is fitted with a suspension kit not approved by us.
Note: The system may not operate correctly if you modify the ride height.
Note: Keep the windshield free from obstructions. For example, bird droppings, insects, snow or ice.
Note: If the camera is blocked or if the windshield is damaged, the system may not function. Note: If enabled in the menu, the system activates at speeds above 40 mph (64 km/h). When below the activation speed, the information display informs the driver that the system is unavailable.
E249505
The system automatically monitors your driving behavior using various inputs including the front camera sensor. If the system detects that your driving alertness is reduced below a certain threshold, the system alerts you using a chime and a message in the information display. USING DRIVER ALERT Switching the System On and Off Switch the system on or off using the information display. See General Information (page 91). When active, the system monitors your alertness level based upon your driving behavior in relation to the lane markings and other factors. System Warnings Note: The system does not issue warnings below approximately 40 mph (64 km/h).
187
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
The warning system has two stages. First, the system issues a temporary warning that you need to take a rest. This message only appears for a short time. If the system detects further reduction in driving alertness, it may issue another warning that remains in the information display for a longer time. You can press OK on the steering wheel control to clear the warning. System Display When active, the system runs automatically in the background and only issues a warning if required. You can view the status at any time using the information display. See General Information (page 91). The alertness level is shown by six steps in a colored bar.
E131358
The current assessment of your alertness is within a typical range.
E131359
The current assessment of your alertness indicates that you should rest as soon as safely possible. The status bar travels from left to right as the calculated alertness level decreases. As the meter approaches the rest icon, the color turns from green to yellow to red.
The yellow position indicates the first warning is active and the red position indicates the second warning is active.
Note: If you have recently received a warning, you should consider resting, even if the current assessment is within the typical range.
Note: If the camera sensor cannot track the road lane markings, or if your vehicle speed drops below approximately 40 mph (64 km/h), the alertness level changes to grey for a short time and the information display informs you that the system is unavailable.
Resetting the System
You can reset the system by either:
· Switching the ignition off and on.
· Stopping the vehicle and then opening and closing the driver's door.
LANE KEEPING SYSTEM (If
Equipped)
WARNINGS The system is designed to aid the driver. It is not intended to replace your attention and judgment. You are still responsible to drive with due care and attention.
Always drive with due care and attention when using and operating the controls and features on your vehicle.
At all times, you are responsible for controlling your vehicle, supervising the system and intervening, if required. Failure to take care may result in the loss of control of your vehicle, serious personal injury or death.
188
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
WARNINGS
In cold and severe weather conditions the system may not function. Rain, snow and spray can all limit sensor performance.
The system will not operate if the sensor cannot track the road lane markings.
The sensor may incorrectly track lane markings as other structures or objects. This can result in a false or missed warning.
The system may not operate properly if the sensor is blocked. Keep the windshield free from obstruction.
If damage occurs in the immediate area surrounding the sensor, have your vehicle checked as soon as possible.
Note: The system works above 40 mph (64 km/h).
Note: The system works as long as the camera can detect one lane marking.
Note: When you select aid or alert and aid mode and the system detects no steering activity for a short period, the system alerts you to put your hands on the steering wheel. The system may detect a light grip or touch on the steering wheel as hands off driving.
Note: The system may not function if the camera is blocked, or if the windshield is damaged or dirty.
E249505
The system notifies you to stay in your lane through the steering system and the instrument cluster display when the front camera detects an unintentional drift out of your lane is likely to occur. The system automatically detects and tracks the road lane markings using a camera mounted behind the interior rear view mirror. Switching the System On and Off Note: The system on or off setting is stored until it is manually changed, unless a MyKey is detected. If the system detects a MyKey, it defaults to on and the mode sets to alert.
E132099
Press the button on the direction indicator stalk to switch the system on or off.
System Settings The system has optional setting menus available. The system stores the last known selection for each of these settings. You do not need to readjust your settings each time you switch the system on.
189
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
Mode: This setting allows you to select which of the system features you can enable.
E165515
Alert only Provides a steering wheel vibration when the system detects an unintended lane departure.
E165516
Aid only Provides an assistance steering torque input toward the lane center when the system detects an unintended lane departure.
E165517
A Alert
B Aid
Alert + Aid Provides an assistance steering torque input toward the lane center.
If your vehicle continues drifting out of the lane after the lane keeping aid corrects the vehicle, the system provides a steering wheel vibration.
Note: The alert and aid diagrams illustrate general zone coverage. They do not provide exact zone parameters.
Intensity: This setting affects the intensity of the steering wheel vibration used for the alert and alert + aid modes. This setting does not affect the aid mode.
· Low · Normal · High
190
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
System Display
E151660
When you switch the system on, an overhead graphic of a vehicle with lane markings appears in the information display. If you select aid mode when you switch on the system, a separate white icon also appears, or in some vehicles arrows display with the lane markings. When you switch off the system, the lane marking graphics do not display. While the system is on, the color of the lane markings change to indicate the system status. Gray: Indicates that the system is temporarily unable to provide a warning or intervention on the indicated side. This may be because: · Your vehicle is under the activation
speed. · The direction indicator is active.
Troubleshooting
· Your vehicle is in a dynamic maneuver.
· The road has no or poor lane markings in the camera field-of-view.
· The camera is obscured or unable to detect the lane markings due to environmental, traffic or vehicle conditions. For example, significant sun angles, shadows, snow, heavy rain or fog, following a large vehicle that is blocking or shadowing the lane or poor headlamp illumination.
See Troubleshooting for additional information.
Green: Indicates that the system is available or ready to provide a warning or intervention on the indicated side.
Yellow: Indicates that the system is providing or has just provided a lane keeping aid intervention.
Red: Indicates that the system is providing or has just provided a lane keeping alert warning.
The system can be temporarily suppressed at any time by the following:
· Quick braking.
· Fast acceleration.
· Using the turn signal indicator.
· Evasive steering maneuver.
· Driving too close to the lane marking.
Why is the feature not available (line markings are gray) when I can see the lane markings on the road?
Your vehicle speed is outside the operational range of the feature. The sun is shining directly into the camera lens. A quick intentional lane change has occurred.
191
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
Why is the feature not available (line markings are gray) when I can see the lane markings on the road?
Your vehicle stays too close to the lane markings. Driving at high speeds in curves. The last alert warning or aid intervention occurred a short time ago. Ambiguous lane markings, for example in construction zones. Rapid transition from light to dark, or from dark to light. Sudden offset in lane markings. ABS or AdvanceTracTM is active. There is a camera blockage due to dirt, grime, fog, frost or water on the windshield. You are driving too close to the vehicle in front of you. Transitioning between no lane markings to lane markings or vice versa. There is standing water on the road. Faint lane markings, for example partial yellow lane markings on concrete roads. Lane width is too narrow or too wide. The camera has not been calibrated after a windshield replacement. Driving on tight roads or on uneven roads.
Why does the vehicle not come back toward the middle of the lane, as expected, in the Aid or Aid + Alert mode?
High cross winds are present. There is a large road crown. Rough roads, grooves or shoulder drop-offs. Heavy uneven loading of the vehicle or improper tire inflation pressure. The tires have been changed, or the suspension has been modified.
192
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
BLIND SPOT INFORMATION SYSTEM (If Equipped)
WARNINGS Do not use the blind spot information system as a replacement for using the interior and exterior mirrors or looking over your shoulder before changing lanes. The blind spot information system is not a replacement for careful driving. The system may not operate properly during severe weather conditions, for example snow, ice, heavy rain and spray. Always drive with due care and attention. Failure to take care may result in a crash.
A
Using the Blind Spot Information System
Vehicles with Automatic Transmission
The system turns on when all of the following occur: · You start your vehicle. · You shift into drive (D). · The vehicle speed is greater than
6 mph (10 km/h).
Note: The system does not operate in park (P) or reverse (R).
Vehicles with Manual Transmission
The system turns on when all of the following occur: · You start your vehicle. · The vehicle speed is greater than
6 mph (10 km/h).
Note: The system does not operate in reverse (R).
System Lights and Messages
A
E124788
The system is designed to detect vehicles that may have entered the blind spot zone (A). The detection area is on both sides of your vehicle, extending rearward from the exterior mirrors to approximately 13 ft (4 m) beyond the rear bumper.
Note: The system does not prevent contact with other vehicles. It is not designed to detect parked vehicles, pedestrians, animals or other infrastructures.
E142442
When the system detects a vehicle, an alert indicator illuminates in the exterior mirror on the side the approaching vehicle is coming from. If you turn the direction indicator on for that side of your vehicle, the alert indicator flashes.
193
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
Note: The system may not alert you if a vehicle quickly passes through the detection zone.
Blocked Sensors
E205199
The sensors are behind the rear bumper on both sides of your vehicle. Note: Keep the sensors free from snow, ice and large accumulations of dirt. Note: Do not cover the sensors with bumper stickers, repair compound or other objects. Note: Blocked sensors could affect system performance. If the sensors are blocked, a message may appear in the information display. See Information Messages (page 95). The alert indicators remain illuminated but the system does not alert you.
System Errors If the system detects a fault, a warning lamp illuminates and a message displays. See Information Messages (page 95).
Switching the System Off and On You can switch the system off using the information display. See General Information (page 91). When you switch the system off, a warning lamp illuminates and a message displays. When you switch the system on or off, the alert indicators flash twice. Note: The system remembers the last setting when you start your vehicle.
Note: The system may not correctly operate when towing a trailer. For vehicles with a trailer tow module and tow bar approved by us, the system turns off when you attach a trailer. For vehicles with an aftermarket trailer tow module or tow bar, we recommend that you switch the system off when you attach a trailer.
To permanently switch the system off, contact an authorized dealer.
CROSS TRAFFIC ALERT (If
Equipped)
WARNINGS Do not use the cross traffic alert system as a replacement for using the interior and exterior mirrors or looking over your shoulder before reversing out of a parking space. The cross traffic alert system is not a replacement for careful driving.
The system may not operate properly during severe weather conditions, for example snow, ice, heavy rain and spray. Always drive with due care and attention. Failure to take care may result in a crash.
The system is designed to alert you of vehicles approaching from the sides when you shift into reverse (R).
Using the Cross Traffic Alert System
The system is designed to detect vehicles that approach with a speed up to 37 mph (60 km/h). Coverage decreases when the sensors are partially, mostly or fully obstructed. Slowly reversing helps increase the coverage area and effectiveness.
194
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
The system turns on when you start the engine and you shift into reverse (R). The
system turns off when you shift out of reverse (R).
E142440
The sensor on the left-hand side is only partially obstructed and zone coverage on the right-hand side is maximized.
E142441
195
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
Zone coverage also decreases when parking at narrow angles. The sensor on the left-hand side is mostly obstructed and zone coverage on that side is severely reduced. System Lights, Messages and Audible Alerts
E142442
When the system detects a vehicle, an indicator illuminates in the exterior mirror on the side the approaching vehicle is coming from. A tone sounds and a message appears in the information display. Note: In exceptional conditions, the system could alert you even when there is nothing in the detection zone, for example a vehicle passing in the distance. Blocked Sensors
E205199
The sensors are behind the rear bumper on both sides of your vehicle.
Note: Keep the sensors free from snow, ice and large accumulations of dirt.
Note: Do not cover the sensors with bumper stickers, repair compound or other objects.
Note: Blocked sensors could affect system performance.
If the sensors are blocked, a message may appear in the information display when you shift into reverse (R). See Information Messages (page 95).
System Limitations
The system may not correctly operate when any of the following occur:
· The sensors are blocked.
· Adjacently parked vehicles or objects are obstructing the sensors.
· Vehicles approach at speeds greater than 37 mph (60 km/h).
· The vehicle speed is greater than 7 mph (12 km/h).
· You reverse out of an angled parking space.
System Errors
If the system detects a fault a message displays. See General Information (page 91).
Switching the System Off and On
You can temporarily switch the system off using the information display. See General Information (page 91). When you switch system off, a message displays. See Information Messages (page 95).
Note: The system turns on each time you switch the ignition on and you shift into reverse (R). If you temporarily switch the system off, it turns on the next time you switch the ignition on.
196
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
Note: The system may not correctly operate when towing a trailer. For vehicles with a trailer tow module and tow bar approved by us, the system turns off when you attach a trailer. For vehicles with an aftermarket trailer tow module or tow bar, we recommend that you switch the system off when you attach a trailer.
To permanently switch the system off, contact an authorized dealer.
STEERING
Electric Power Steering
WARNINGS The electric power steering system has diagnostic checks that continuously monitor the system. If a fault is detected, a message displays in the information display. Stop your vehicle as soon as it is safe to do so. Switch the ignition off. After at least 10 seconds, switch the ignition on and watch the information display for a steering system warning message. If a steering system warning message returns, have the system checked as soon as possible.
If the system detects an error, you may not feel a difference in the steering, however a serious condition may exist. Have your vehicle checked as soon as possible, failure to do so may result in loss of steering control.
Your vehicle is equipped with an electric power-assisted steering system. There is no fluid reservoir to check or fill.
If your vehicle loses electrical power while you are driving (or if the ignition is turned off), you can steer the vehicle manually, but it takes more effort. Extreme continuous steering may increase the effort it takes for you to steer. This occurs to prevent internal overheating and
permanent damage to your steering system. If this should occur, you will neither lose the ability to steer the vehicle manually nor will it cause permanent damage. Typical steering and driving maneuvers will allow the system to cool and steering assist will return to normal.
Steering Tips
If the steering wanders or pulls, check for: · An improperly inflated tire. · Uneven tire wear. · Loose or worn suspension
components. · Loose or worn steering components. · Improper vehicle alignment.
A high crown in the road or high crosswinds may also make the steering seem to wander or pull.
COLLISION WARNING SYSTEM
(If Equipped)
PRINCIPLE OF OPERATION
WARNINGS This system is designed to be a supplementary driving aid. It is not intended to replace the driver's attention, and judgment, or the need to apply the brakes. This system does NOT activate the brakes automatically. Failure to press the brake pedal to activate the brakes may result in a collision.
The collision warning system with brake support cannot help prevent all collisions. Do not rely on this system to replace driver judgment and the need to maintain distance and speed.
Note: The system does not detect, warn or respond to potential collisions with vehicles to the rear or sides of the vehicle.
197
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
Note: The collision warning system is active at speeds above approximately 5 mph (8 km/h).
E156130
This system is designed to alert the driver of certain collision risks. A radar detects if your vehicle is rapidly approaching another vehicle traveling in the same direction as yours.
E156131
If it is, a red warning light illuminates and an audible warning chime sounds. The brake support system assists the driver in reducing the collision speed by charging the brakes. If the risk of collision further increases after the warning light illuminates, the brake support prepares the brake system for rapid braking. This may be apparent to the driver. The system does not automatically activate the brakes but, if the brake pedal is pressed, full force braking is applied even if the brake pedal is lightly pressed.
Using the Collision Warning System
WARNING The collision warning system's brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle's brakes. The brake pedal must be pressed just like any typical braking situation.
The warning system sensitivity can be adjusted to one of three possible settings by using the information display control. See General Information (page 91). Note: If collision warnings are perceived as being too frequent or disturbing then the warning sensitivity can be reduced, though the manufacturer recommends using the highest sensitivity setting where possible. Setting lower sensitivity would lead to fewer and later system warnings. See General Information (page 91).
Blocked Sensors
E145632
If a message regarding a blocked sensor appears in the information display, the radar signals from the sensor have been obstructed. The sensors are located behind a fascia cover near the driver side of the lower grille. When the sensors are obstructed, a vehicle ahead cannot be detected and the collision warning system does not function. The following table lists possible causes and actions for this message being displayed.
198
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Aids
Cause
Action
The surface of the radar in the grille is dirty Clean the grille surface in front of the radar
or obstructed in some way
or remove the object causing the obstruc-
tion
The surface of the radar in the grille is clean Wait a short time. It may take several but the message remains in the display minutes for the radar to detect that it is no longer obstructed
Heavy rain, spray, snow, or fog is interfering The collision warning system is temporarily
with the radar signals
disabled. Collision warning should automat-
ically reactivate a short time after the
weather conditions improve
Swirling water, or snow or ice on the surface The collision warning system is temporarily
of the road may interfere with the radar disabled. Collision warning should automat-
signals
ically reactivate a short time after the
weather conditions improve
System Limitations
WARNING
The collision warning system's brake support can only help reduce the speed at which a collision occurs if the driver applies the vehicle's brakes. The brake pedal must be pressed just like any typical braking situation.
Due to the nature of radar technology, there may be certain instances where vehicles do not provide a collision warning. These include:
· Stationary vehicles or vehicles moving below 6 mph (10 km/h).
· Pedestrians or objects in the roadway.
· Oncoming vehicles in the same lane.
· Severe weather conditions (see blocked sensor section).
· Debris build-up on the grille near the headlamps (see blocked sensor section).
· Small distance to vehicle ahead.
· Steering wheel and pedal movements are large (very active driving style).
If the front end of the vehicle is hit or damaged, the radar sensing zone may be altered causing missed or false collision warnings. See your authorized dealer to have your collision warning radar checked for proper coverage and operation.
199
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Load Carrying
REAR UNDER FLOOR STORAGE Cargo Management System (If
Equipped)
E142445
The system is located in the floor of the cargo area. Lift the handle to open. Adjustable Load Floor (If Equipped)
LUGGAGE COVERS
WARNINGS Make sure that the posts are properly latched in mounting features. The cover may cause injury in a sudden stop or accident if it is not securely installed.
Do not place any objects on the cargo area shade. They may obstruct your vision or strike occupants of your vehicle in a sudden stop or crash.
Use the cargo shade to cover items in the cargo area of your vehicle.
E142446
Vehicles with the standard size spare tire can adjust the load floor to two positions. The front of the load floor can be placed either on (for high position) or below (for low position) the ledges behind the rear seats. The rear of the load floor always sits on the two small shelves located on the liftgate trim.
E142447
Insert the ends of the cargo shade into the mounting features located behind the rear seat on the rear trim panels to install the cargo shade.
To operate the cargo shade:
1. Pull the rear edge of the cargo shade rearward.
2. Secure both ends of the support rod into the retention slots located on the rear quarter trim panels.
200
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Load Carrying
ROOF RACKS AND LOAD CARRIERS (If Equipped)
WARNING
When loading the roof racks, we recommend you evenly distribute the load, as well as maintain a low center of gravity. Loaded vehicles, with higher centers of gravity, may handle differently than unloaded vehicles. Take extra precautions, such as slower speeds and increased stopping distance, when driving a heavily loaded vehicle.
The maximum recommended load, evenly distributed on the crossbars, is:
· 100 lb (45 kg) for vehicles without a moonroof.
· 45 lb (20 kg) for vehicles with a moonroof.
Note: Never place loads directly on the roof panel.
For correct roof rack system function, you must place loads directly on crossbars affixed to the roof rack side rails. When using the roof rack system, we recommend you use Ford Genuine Accessory crossbars designed specifically for your vehicle.
Make sure that you securely fasten the load. Check the tightness of the load before driving and at each fuel stop.
Adjusting the Crossbar (If Equipped)
Note: For less wind noise and better aerodynamics, only install the crossbars when you need them for carrying cargo. If you prefer to keep the crossbars installed, the front crossbar has two positions. The front position is quieter for wind noise. The rear position may help to reduce wind noise from an open moonroof. Follow the steps to reposition or remove the front crossbar. You can remove the rear crossbar fasteners by unscrewing the assembly.
E142448
1. Remove the crossbar thumbwheels at both sides of the front crossbar by turning them counterclockwise.
Note: If you cannot loosen the thumbwheel with your hand, loosen the fastener head. You can also use a small screwdriver or similar tool to loosen the thumbwheel by inserting the shaft between the two paddles of the thumbwheel and rotating it loose. 2. Remove the crossbar by sliding the
ends off of the shoulder bolts in the side rails. 3. Move the crossbar to the new side rail position and slide the crossbar onto the shoulder bolt at that position. 4. Replace and tighten the thumbwheels at both sides of the crossbar by turning them clockwise until tight. You can use a small screwdriver or similar tool to tighten if necessary.
201
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Load Carrying
Make sure to check that the thumbwheels are tight each time you add or remove load from the roof rack, and periodically while traveling. Make sure that the load is secure before traveling.
LOAD LIMIT
Vehicle Loading - with and without a Trailer
This section guides you in the proper loading of your vehicle, trailer, or both. Keep your loaded vehicle weight within its design rating capability, with or without a trailer. Properly loading your vehicle provides maximum return of vehicle design performance. Before you load your vehicle, become familiar with the following terms for determining your vehicle's weight rating, with or without a trailer, from the vehicle's Tire and Loading Information label or Safety Compliance Certification label.
Payload
Tire and Loading Label Information Example:
E198719
PAYLOAD
E143816
202
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Load Carrying
Payload is the combined weight of cargo and passengers that your vehicle is carrying. The maximum payload for your vehicle appears on the Tire and Loading label. The label is either on the B-pillar or the edge of the driver door. Vehicles exported outside the US and Canada may not have a tire and loading label. Look for "The combined weight of occupants and cargo should never exceed XXX kg OR XXX lb" for maximum payload. The payload listed on the Tire and Loading Information label is the maximum payload for your vehicle as built by the assembly plant. If you install any additional equipment on your vehicle, you must determine the new payload. Subtract the weight of the equipment from the payload listed on the Tire and Loading label. When towing, trailer tongue weight or king pin weight is also part of payload.
WARNING
The appropriate loading capacity of your vehicle can be limited either by volume capacity (how much space is available) or by payload capacity (how much weight the vehicle should carry). Once you have reached the maximum payload of your vehicle, do not add more cargo, even if there is space available. Overloading or improperly loading your vehicle can contribute to loss of vehicle control and vehicle rollover.
GAWR (Gross Axle Weight Rating)
GAWR is the maximum allowable weight that a single axle (front or rear) can carry. These numbers are on the Safety Compliance Certification label. The label is located on the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver seating position.
The total load on each axle must never exceed its Gross Axle Weight Rating.
GVWR (Gross Vehicle Weight Rating)
GVWR is the maximum allowable weight of the fully loaded vehicle. This includes all options, equipment, passengers and cargo. It appears on the Safety Compliance Certification label. The label is located on the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver seating position.
The gross vehicle weight must never exceed the Gross Vehicle Weight Rating.
203
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Load Carrying
Safety Compliance Certification Label Example:
E198828
WARNING Exceeding the Safety Compliance Certification label vehicle weight limits can adversely affect the performance and handling of your vehicle, cause vehicle damage and can result in the loss of control of your vehicle, serious personal injury or death.
Maximum Loaded Trailer Weight
Maximum loaded trailer weight is the highest possible weight of a fully loaded trailer the vehicle can tow. Consult an authorized dealer (or the RV and Trailer Towing Guide available at an authorized dealer) for more detailed information.
GCWR (Gross Combined Weight Rating)
GCWR is the maximum allowable weight of the vehicle and the loaded trailer, including all cargo and passengers, that the vehicle can handle without risking damage. (Important: The towing vehicle's braking system is rated for operation at Gross Vehicle Weight Rating, not at Gross Combined Weight Rating.) Separate functional brakes should be used for safe control of towed vehicles and for trailers where the Gross Combined Weight of the towing vehicle plus the trailer exceed the Gross Vehicle Weight Rating of the towing vehicle.
The gross combined weight must never exceed the Gross Combined Weight Rating.
Note: For trailer towing information refer to the RV and Trailer Towing Guide available at an authorized dealer.
WARNINGS
Do not exceed the GVWR or the GAWR specified on the certification label.
Do not use replacement tires with lower load carrying capacities than the original tires because they may lower your vehicle's GVWR and GAWR limitations. Replacement tires with a higher limit than the original tires do not increase the GVWR and GAWR limitations.
204
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Load Carrying
WARNINGS
Exceeding any vehicle weight rating can adversely affect the performance and handling of your vehicle, cause vehicle damage and can result in the loss of control of your vehicle, serious personal injury or death.
Steps for determining the correct load limit:
1. Locate the statement "The combined weight of occupants and cargo should never exceed XXX kg or XXX lb." on your vehicle's placard.
2. Determine the combined weight of the driver and passengers that will be riding in your vehicle.
3. Subtract the combined weight of the driver and passengers from XXX kg or XXX lb.
4. The resulting figure equals the available amount of cargo and luggage load capacity. For example, if the "XXX" amount equals 1,400 lb. and there will be five 150 lb. passengers in your vehicle, the amount of available cargo and luggage load capacity is 650 lb. (1400-750 (5 x 150) = 650 lb.)
5. Determine the combined weight of luggage and cargo being loaded on the vehicle. That weight may not safely exceed the available cargo and luggage load capacity calculated in Step 4.
6. If your vehicle will be towing a trailer, load from your trailer will be transferred to your vehicle. Consult this manual to determine how this reduces the available cargo and luggage load capacity of your vehicle.
Helpful examples for calculating the available amount of cargo and luggage load capacity
Suppose your vehicle has a 1400-pound (635-kilogram) cargo and luggage capacity. You decide to go golfing. Is there enough load capacity to carry you, four of your friends and all the golf bags? You and four friends average 220 pounds (99 kilograms) each and the golf bags weigh approximately 30 pounds (13.5 kilograms) each. The calculation would be: 1400 (5 x 220) - (5 x 30) = 1400 - 1100 - 150 = 150 pounds. Yes, you have enough load capacity in your vehicle to transport four friends and your golf bags. In metric units, the calculation would be: 635 kilograms - (5 x 99 kilograms) (5 x 13.5 kilograms) = 635 - 495 67.5 = 72.5 kilograms.
205
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Load Carrying
Suppose your vehicle has a 1400-pound (635-kilogram) cargo and luggage capacity. You and one of your friends decide to pick up cement from the local home improvement store to finish that patio you have been planning for the past two years. Measuring the inside of the vehicle with the rear seat folded down, you have room for twelve 100-pound (45-kilogram) bags of cement. Do you have enough load capacity to transport the cement to your home? If you and your friend each weigh 220 pounds (99 kilograms), the calculation would be: 1400 (2 x 220) - (12 x 100) = 1400 - 440 - 1200 = - 240 pounds. No, you do not have enough cargo capacity to carry that much weight. In metric units, the calculation would be: 635 kilograms - (2 x 99 kilograms) - (12 x 45 kilograms) = 635 - 198 - 540 = -103 kilograms. You will need to reduce the load weight by at least 240 pounds (104 kilograms). If you remove three 100-pound (45-kilogram) cement bags, then the load calculation would be:1400 - (2 x 220) - (9 x 100) = 1400 - 440 900 = 60 pounds. Now you have the load capacity to transport the cement and your friend home. In metric units, the calculation would be: 635 kilograms - (2 x 99 kilograms) - (9 x 45 kilograms) = 635 - 198 - 405 = 32 kilograms.
The above calculations also assume that the loads are positioned in your vehicle in a manner that does not overload the front or the rear gross axle weight rating specified for your vehicle on the Safety Compliance Certification label.
Special Loading Instructions for Owners of Pick-up Trucks and Utility-type Vehicles
WARNING
When loading the roof racks, we recommend you evenly distribute the load, as well as maintain a low center of gravity. Loaded vehicles, with higher centers of gravity, may handle differently than unloaded vehicles. Take extra precautions, such as slower speeds and increased stopping distance, when driving a heavily loaded vehicle.
206
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Towing
TOWING A TRAILER
WARNINGS Towing trailers beyond the maximum recommended gross trailer weight exceeds the limit of your vehicle and could result in engine damage, transmission damage, structural damage, loss of vehicle control, vehicle rollover and personal injury.
Do not exceed the GVWR or the GAWR specified on the certification label.
Note: See Recommended Towing Weights (page 208).
Your vehicle may have electrical items, such as fuses or relays, related to towing. See Fuses (page 229).
Your vehicle's load capacity designation is by weight, not by volume, so you cannot necessarily use all available space when loading a vehicle or trailer.
Towing a trailer places an extra load on your vehicle's engine, transmission, axle, brakes, tires and suspension. Inspect these components periodically during, and after, any towing operation.
Load Placement
To help minimize how trailer movement affects your vehicle when driving:
· Load the heaviest items closest to the trailer floor.
· Load the heaviest items centered between the left and right side trailer tires.
· Load the heaviest items above the trailer axles or just slightly forward toward the trailer tongue. Do not allow the final trailer tongue weight to go above or below 10-15% of the loaded trailer weight.
· Select a ball mount with the correct rise or drop and load capacity. When both the loaded vehicle and trailer are connected, the trailer frame should be level, or slightly angled down toward your vehicle, when viewed from the side.
When driving with a trailer or payload, a slight takeoff vibration or shudder may be present due to the increased payload weight. Additional information regarding proper trailer loading and setting your vehicle up for towing is located in another chapter of this manual. See Load Limit (page 202).
You can also find information in the RV & Trailer Towing Guide available at your authorized dealer, or online.
207
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Towing
RV & Trailer Towing Guide Online Website http://www.fleet.ford.com/towing-guides/
TRAILER SWAY CONTROL (If
Equipped)
WARNING
Turning off trailer sway control increases the risk of loss of vehicle control, serious injury or death. Ford does not recommend disabling this feature except in situations where speed reduction may be detrimental (such as hill climbing), the driver has significant trailer towing experience, and can control trailer sway and maintain safe operation.
Note: This feature does not prevent trailer sway, but reduces it when it begins.
Note: This feature cannot stop all trailers from swaying.
Note: In some cases, if your vehicle speed is too high, the system may turn on multiple times, gradually reducing your vehicle speed.
The system applies the brakes to the individual wheels and reduces engine torque to aid vehicle stability. If the trailer begins to sway, the stability control warning lamp flashes and a message appears in the information display. See Information Messages (page 95). Slow your vehicle down, pull safely to the side of the road and check for correct load distribution.
You can switch this feature off in the information display. When you switch the ignition on, the system automatically turns on.
RECOMMENDED TOWING
WEIGHTS
Note: Do not exceed the trailer weight for your vehicle configuration listed in the chart below.
Note: Be sure to take into consideration trailer frontal area. Do not exceed 20 feet2 (1.86 meters2) if your vehicle is not
equipped with a towing package or 30 feet2 (2.79 meters2) if your
vehicle is equipped with a towing package.
Note: For high altitude operation, reduce the gross combined weight by 2% per 1000 feet (300 meters) starting at the 1000 foot (300 meter) elevation point.
Note: Certain states require electric trailer brakes for trailers over a specified weight. Be sure to check state regulations for this specified weight. The maximum trailer weights listed may be limited to this specified weight, as the vehicle's electrical system may not include the wiring connector needed to activate electric trailer brakes.
208
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Towing
Your vehicle may tow a trailer provided the maximum trailer weight is less than or equal to the
maximum trailer weight listed for your vehicle configuration on the following chart.
Powertrain
Maximum GCWR
2.5L 2WD
5351 lb (2427 kg)
1.5L GTDI 2WD
5862 lb (2659 kg)
2.0L GTDI 2WD2
5957 lb (2702 kg)
2.0L GTDI 2WD3
7457 lb (3382 kg)
1.5L GTDI 4WD
6005 lb (2724 kg)
2.0L GTDI 4WD2
6091 lb (2763 kg)
2.0L GTDI 4WD3
7591 lb (3443 kg)
1Calculated with SAE J2807 method.
2Without trailer towing package.
3 With trailer towing package.
Maximum trailer weight1
1500 lb (681 kg) 2000 lb (907 kg) 2000 lb (907 kg)
3500 lb (1588 kg)
2000 lb (907 kg) 2000 lb (907 kg)
3500 lb (1588 kg)
209
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Towing
ESSENTIAL TOWING CHECKS
Follow these guidelines for safe towing:
· Do not tow a trailer until you drive your vehicle at least 1,000 mi (1,600 km).
· Consult your local motor vehicle laws for towing a trailer.
· See the instructions included with towing accessories for the proper installation and adjustment specifications.
· Service your vehicle more frequently if you tow a trailer. See your scheduled maintenance information.
· If you use a rental trailer, follow the instructions the rental agency gives you.
You can find information on load specification terms found on the tire label and Safety Compliance label as well as instructions on calculating your vehicle's load in the Load Carrying chapter. See Load Limit (page 202).
Remember to account for the trailer tongue weight as part of your vehicle load when calculating the total vehicle weight.
Hitches
Do not use a hitch that either clamps onto the bumper or attaches to the axle.
Distribute the trailer load so 10-15% of the total trailer weight is on the tongue.
Safety Chains
Note: Never attach safety chains to the bumper.
Always connect the safety chains to the hook retainers of your vehicle hitch.
To connect the trailer's safety chains, cross them under the trailer tongue and allow enough slack for turning tight corners. Do not allow the chains to drag on the ground.
Trailer Brakes
WARNING
Do not connect a trailer's hydraulic brake system directly to your vehicle's brake system. Your vehicle may not have enough braking power and your chances of having a collision greatly increase.
Electric brakes and manual, automatic or surge-type trailer brakes are safe if you install them properly and adjust them to the manufacturer's specifications. The trailer brakes must meet local and federal regulations.
The rating for the tow vehicle's braking system operation is at the gross vehicle weight rating, not the gross combined weight rating.
Separate functioning brake systems are required for safe control of towed vehicles and trailers weighing more than 1500 pounds (680 kilograms) when loaded.
Trailer Lamps
WARNING
Never connect any trailer lamp wiring to the vehicle's tail lamp wiring; this may damage the electrical system resulting in fire. Contact your authorized dealer as soon as possible for assistance in proper trailer tow wiring installation. Additional electrical equipment may be required.
Trailer lamps are required on most towed vehicles. Make sure all running lights, brake lights, turn signals and hazard lights are working.
210
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Towing
Before Towing a Trailer
Practice turning, stopping and backing up to get the feel of your vehicle-trailer combination before starting on a trip. When turning, make wider turns so the trailer wheels clear curbs and other obstacles.
When Towing a Trailer
· Do not drive faster than 70 mph (113 km/h) during the first 500 mi (800 km).
· Do not make full-throttle starts.
· Check your hitch, electrical connections and trailer wheel lug nuts thoroughly after you have traveled 50 mi (80 km).
· When stopped in congested or heavy traffic during hot weather, place the gearshift in position P to aid engine and transmission cooling and to help A/C performance.
· Turn off the speed control with heavy loads or in hilly terrain. The speed control may turn off automatically when you are towing on long, steep grades.
· Shift to a lower gear when driving down a long or steep hill. Do not apply the brakes continuously, as they may overheat and become less effective.
· If your transmission is equipped with a Grade Assist or Tow/Haul feature, use this feature when towing. This provides engine braking and helps eliminate excessive transmission shifting for optimum fuel economy and transmission cooling.
· Allow more distance for stopping with a trailer attached. Anticipate stops and brake gradually.
· Avoid parking on a grade. However, if you must park on a grade:
1. Turn the steering wheel to point your vehicle tires away from traffic flow.
2. Set your vehicle parking brake.
3. Place the automatic transmission in position P.
4. Place wheel chocks in front and back of the trailer wheels. (Chocks not included with vehicle.)
Launching or Retrieving a Boat or Personal Watercraft (PWC)
Note: Disconnect the wiring to the trailer before backing the trailer into the water.
Note: Reconnect the wiring to the trailer after removing the trailer from the water.
When backing down a ramp during boat launching or retrieval:
· Do not allow the static water level to rise above the bottom edge of the rear bumper.
· Do not allow waves to break higher than 6 in (15 cm) above the bottom edge of the rear bumper.
Exceeding these limits may allow water to enter vehicle components:
· Causing internal damage to the components.
· Affecting driveability, emissions, and reliability.
Replace the rear axle lubricant anytime the rear axle has been submerged in water. Water may have contaminated the rear axle lubricant, which is not normally checked or changed unless a leak is suspected or other axle repair is required.
211
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Towing
TOWING THE VEHICLE ON FOUR WHEELS
Emergency Towing
If your vehicle becomes inoperable (without access to wheel dollies, car-hauling trailer, or flatbed transport vehicle), it can be flat-towed (all wheels on the ground, regardless of the powertrain and transmission configuration) under the following conditions:
· Your vehicle is facing forward for towing in a forward direction.
· Place the transmission in position N. If you cannot move the transmission into N, you may need to override it. See Transmission (page 150).
· Maximum speed is 35 mph (56 km/h).
· Maximum distance is 50 mi (80 km).
WARNING
If your vehicle has a steering wheel lock make sure the ignition is in the accessory or on position when being towed.
Recreational Towing
Note: Put your climate control system in recirculated air mode to prevent exhaust fumes from entering the vehicle. See Climate Control (page 107).
Follow these guidelines if you have a need for recreational (RV) towing. An example of recreational towing would be towing your vehicle behind a motorhome. We designed these guidelines to prevent damage to your transmission.
Front-wheel drive vehicles CANNOT be flat-towed (all wheels on the ground) as vehicle or transmission damage may occur. You must place the front wheels on a two-wheel tow dolly. If you are using a tow dolly, follow the instructions specified by the equipment provider.
Four-wheel drive vehicles CANNOT be flat-towed (all wheels on the ground), as vehicle or transmission damage may occur. It is recommended to tow your vehicle with all four (4) wheels off the ground such as when using a car-hauling trailer. Otherwise, you cannot recreational tow your vehicle.
212
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Hints
BREAKING-IN
You need to break in new tires for approximately 300 mi (480 km). During this time, your vehicle may exhibit some unusual driving characteristics.
Avoid driving too fast during the first 1,000 mi (1,600 km). Vary your speed frequently and change up through the gears early. Do not labor the engine.
Do not tow during the first 1,000 mi (1,600 km).
ECONOMICAL DRIVING
Your fuel economy is affected by several things, such as how you drive, the conditions you drive under, and how you maintain your vehicle.
You may improve your fuel economy by keeping these things in mind:
· Accelerate and slow down in a smooth, moderate fashion.
· Drive at steady speeds without stopping.
· Anticipate stops; slowing down may eliminate the need to stop.
· Combine errands and minimize stop-and-go driving.
· Close the windows for high-speed driving.
· Drive at reasonable speeds (traveling at 55 mph [88 km/h] uses 15% less fuel than traveling at 65 mph [105 km/h]).
· Keep the tires properly inflated and use only the recommended size.
· Use the recommended engine oil.
· Perform all regularly scheduled maintenance.
Avoid these actions; they reduce your fuel economy:
· Sudden accelerations or hard accelerations.
· Revving the engine before turning it off.
· Idle for periods longer than one minute.
· Warm up your vehicle on cold mornings.
· Use the air conditioner or front defroster.
· Use the speed control in hilly terrain.
· Rest your foot on the brake pedal while driving.
· Drive a heavily loaded vehicle or tow a trailer.
· Carry unnecessary weight (approximately 1 mpg [0.4 km/L] is lost for every 400 lb [180 kilogram] of weight carried).
· Driving with the wheels out of alignment.
Conditions
· Heavily loading a vehicle or towing a trailer may reduce fuel economy at any speed.
· Adding certain accessories to your vehicle (for example bug deflectors, rollbars, light bars, running boards, ski racks or luggage racks) may reduce fuel economy.
· To maximize the fuel economy, drive with the tonneau cover installed (if equipped).
· Using fuel blended with alcohol may lower fuel economy.
· Fuel economy may decrease with lower temperatures during the first 510 mi (1216 km) of driving.
· Driving on flat terrain offers improved fuel economy as compared to driving on hilly terrain.
213
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Hints
· Transmissions give their best fuel economy when operated in the top cruise gear and with steady pressure on the gas pedal.
· Four-wheel-drive operation (if equipped) is less fuel efficient than two-wheel-drive operation.
· Close the windows for high-speed driving.
DRIVING THROUGH WATER
WARNING Do not drive through flowing or deep water as you may lose control of your vehicle.
Note: Driving through standing water can cause vehicle damage. Note: Engine damage can occur if water enters the air filter. Before driving through standing water, check the depth. Never drive through water that is higher than the bottom of the front rocker area of your vehicle.
E266447
When driving through standing water, drive very slowly and do not stop your vehicle. Your brake performance and traction may be limited. After driving through water and as soon as it is safe to do so:
· Lightly press the brake pedal to dry the brakes and to check that they work.
· Check that the horn works.
· Check that the exterior lights work.
· Turn the steering wheel to check that the steering power assist works.
FLOOR MATS
WARNINGS Use a floor mat designed to fit the footwell of your vehicle that does not obstruct the pedal area. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
Pedals that cannot move freely can cause loss of vehicle control and increase the risk of serious personal injury.
Secure the floor mat to both retention devices so that it cannot slip out of position and interfere with the pedals. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
Do not place additional floor mats or any other covering on top of the original floor mats. This could result in the floor mat interfering with the operation of the pedals. Failure to follow this instruction could result in the loss of control of your vehicle, personal injury or death.
Always make sure that objects cannot fall into the driver foot well while your vehicle is moving. Objects that are loose can become trapped under the pedals causing a loss of vehicle control.
214
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Driving Hints
E142666
To install the floor mats, position the floor mat eyelet over the retention post and press down to lock in position. To remove the floor mat, reverse the installation procedure. Note: Regularly check the floor mats to make sure they are secure.
215
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Roadside Emergencies
ROADSIDE ASSISTANCE
Vehicles Sold in the United States: Getting Roadside Assistance
To fully assist you should you have a vehicle concern, Ford Motor Company offers a complimentary roadside assistance program. This program is separate from the New Vehicle Limited Warranty.
The service is available:
· 24 hours a day, seven days a week.
· For the coverage period listed on the Roadside Assistance Card included in your Owner's Manual portfolio.
Roadside Assistance covers:
· A flat tire change with a good spare (except vehicles supplied with a tire inflation kit).
· Battery jump start.
· Lock-out assistance (key replacement cost is the customer's responsibility).
· Fuel delivery -- independent service contractors, if not prohibited by state, local or municipal law, shall deliver up to 2 gal (8 L) of gasoline or 5 gal (20 L) of diesel fuel to a disabled vehicle. Roadside Assistance limits fuel delivery service to two no-charge occurrences within a 12-month period.
· Winch out -- available within 100 ft (30 m) of a paved or county maintained road, no recoveries.
· Towing -- independent service contractors, if not prohibited by state, local or municipal law, shall tow Ford eligible vehicles to an authorized dealer within 35 mi (56 km) of the disablement location or to the nearest authorized dealer. If a member requests a tow to an authorized dealer that is more than 35 mi (56 km) from the disablement location, the member shall be responsible for any mileage costs in excess of 35 mi (56 km).
· Roadside Assistance includes up to $200 for a towed trailer if the disabled eligible vehicle requires service at the nearest authorized dealer. If the towing vehicle is operational but the trailer is not, then the trailer does not qualify for any roadside services.
Vehicles Sold in the United States: Using Roadside Assistance
Complete the roadside assistance identification card and place it in your wallet for quick reference. This card is in the owner's information portfolio in the glove compartment.
United States vehicle customers who require Roadside Assistance, call 1-800-241-3673.
If you need to arrange roadside assistance for yourself, Ford Motor Company reimburses a reasonable amount for towing to the nearest dealership within 35 mi (56 km). To obtain reimbursement information, United States vehicle customers call 1-800-241-3673. Customers need to submit their original receipts.
216
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Roadside Emergencies
Vehicles Sold in Canada: Getting Roadside Assistance
To fully assist you should you have a vehicle concern, Ford Motor Company of Canada, Limited offers a complimentary roadside assistance program. This program is eligible within Canada or the continental United States.
This program is separate from the New Vehicle Limited Warranty, but the coverage is concurrent with the powertrain coverage period of your vehicle.
Canadian customers who require roadside assistance, call 1-800-665-2006.
Vehicles Sold in Canada: Using Roadside Assistance
Complete the roadside assistance identification card and place it in your wallet for quick reference.
In Canada, this card is found in the Warranty Guide in the glove compartment of your vehicle.
Vehicles Sold in Canada: Roadside Assistance Program Coverage
The service is available 24 hours a day, seven days a week.
Canadian roadside coverage and benefits may differ from the U.S. coverage.
If you require more information, please refer to the coverage section of your warranty guide, call us in Canada at 1-800-665-2006, or visit our website at www.ford.ca.
HAZARD FLASHERS
Note: The hazard flashers operate when the ignition is in any position, or if the key is not in the ignition. If used when the vehicle is not running, the battery loses charge. As a result, there may be insufficient power to restart your vehicle.
The flasher control is on the instrument panel. Use your hazard flashers when your vehicle is creating a safety hazard for other motorists.
· Press the flasher control and all front and rear direction indicators flash.
· Press the button again to switch them off.
FUEL SHUTOFF
WARNING
If your vehicle has been involved in a crash, have the fuel system checked. Failure to follow this instruction could result in fire, personal injury or death.
Note: When you try to restart your vehicle after a fuel shutoff, the vehicle makes sure that various systems are safe to restart. Once the vehicle determines the systems are safe, then the vehicle allows you to restart.
Note: In the event that your vehicle does not restart after your third attempt, contact a qualified technician.
The fuel pump shutoff stops the flow of fuel to the engine in the event of a moderate to severe crash. Not every impact causes a shutoff.
Should your vehicle shut off after a crash, you may restart your vehicle.
217
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Roadside Emergencies
If your vehicle has a key system:
1. Switch off the ignition.
2. Switch to start position.
3. Switch off the ignition.
4. Switch on the ignition to re-enable the fuel pump.
5. If the vehicle does not start, repeat steps 1 through 4.
If your vehicle has a push button start system:
1. Press START/STOP to switch off your vehicle.
2. Press the brake pedal and START/STOP to switch on your vehicle.
3. Remove your foot from the brake pedal and press START/STOP to switch off your vehicle.
4. You can attempt to start the vehicle by pressing the brake pedal and START/STOP, or press START/STOP without pressing the brake pedal.
5. If the vehicle does not start, repeat steps 1 through 4.
JUMP STARTING THE VEHICLE
WARNINGS Keep batteries out of reach of children. Batteries contain sulfuric acid. Avoid contact with skin, eyes or clothing. Shield your eyes when working near the battery to protect against possible splashing of acid solution. In case of acid contact with skin or eyes, flush immediately with water for a minimum of 15 minutes and get prompt medical attention. If acid is swallowed, call a physician immediately.
WARNINGS
Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide correct ventilation.
Use only the specified jacking points. If you use other positions, you may damage the body, steering, suspension, engine, braking system or the fuel lines.
Use only adequately sized cables with insulated clamps.
Note: Do not disconnect the battery of the disabled vehicle as this could damage the vehicle's electrical system.
218
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Roadside Emergencies
To Connect the Booster Cables
2. Connect the positive (+) jumper cable to the positive (+) terminal of the discharged battery.
A
C
D
B
E102925
A Flat battery vehicle. B Booster battery vehicle. C Positive connection cable. D Negative connection cable.
WARNING Make sure that the cables are clear of any moving parts and fuel delivery system parts.
Park the booster vehicle close to the hood of the disabled vehicle, making sure the two vehicles do not touch. 1. Switch off the engine and any electrical
equipment.
E152134
3. Make the final connection of the negative (-) cable to an exposed metal part of the stalled vehicle's engine, away from the battery and the fuel injection system, or connect the negative (-) cable to a ground connection point if available.
WARNINGS Do not connect the end of the second cable to the negative (-) terminal of the battery to be jumped. A spark may cause an explosion of the gases that surround the battery.
Make sure that the cables are clear of any moving parts and fuel delivery system parts.
To Start the Engine
1. Start the engine of the booster vehicle and rev the engine moderately, or press the accelerator gently to keep your engine speed between 2000 and 3000 RPM, as shown in your tachometer.
2. Start the engine of the disabled vehicle.
3. Once the disabled vehicle has been started, run both vehicle engines for an additional three minutes before disconnecting the jumper cables.
219
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Roadside Emergencies
Remove the jumper cables in the reverse order that they were connected.
Note: Do not switch the headlamps on when disconnecting the cables. The peak voltage could blow the bulbs.
POST-CRASH ALERT SYSTEM
The system flashes the direction indicators and sounds the horn (intermittently) in the event of a serious impact that deploys an airbag (front, side, side curtain or Safety Canopy) or the seatbelt pretensioners.
The horn and indicators turn off when: · You press the hazard control button. · You press the panic button on the
remote entry transmitter (if equipped). · Your vehicle runs out of power. · Sounding of the horn is only enabled
in specific markets.
TRANSPORTING THE VEHICLE
E143886
If you need to have your vehicle towed, contact a professional towing service or, if you are a member of a roadside assistance program, your roadside assistance service provider. We recommend the use of a wheel lift and dollies or flatbed equipment to tow your vehicle. Do not tow with a slingbelt. Ford Motor Company has not approved a slingbelt towing procedure. Vehicle damage may occur if towed incorrectly, or by any other means. Ford Motor Company produces a towing manual for all authorized tow truck operators. Have your tow truck operator refer to this manual for proper hook-up and towing procedures for your vehicle.
220
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Roadside Emergencies
It is acceptable to have your front-wheel drive vehicle towed from the front if using proper wheel lift equipment to raise the front wheels off the ground. When towing in this manner, the rear wheels can remain on the ground. Front-wheel drive vehicles must have the front wheels placed on a tow dolly when towing your vehicle from the rear using wheel lift equipment. This prevents damage to the transmission. Towing an all-wheel or four-wheel drive vehicle requires that all wheels be off the ground, such as using a wheel lift and dollies or flatbed equipment. This prevents damage to the transmission, all-wheel or four-wheel drive system and vehicle.
221
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Customer Assistance
GETTING THE SERVICES YOU NEED
Warranty repairs to your vehicle must be performed by an authorized dealer. While any authorized dealer handling your vehicle line will provide warranty service, we recommend you return to your selling authorized dealer who wants to ensure your continued satisfaction.
Please note that certain warranty repairs require special training and equipment, so not all authorized dealers are authorized to perform all warranty repairs. This means that, depending on the warranty repair needed, you may have to take your vehicle to another authorized dealer.
A reasonable time must be allowed to perform a repair after taking your vehicle to the authorized dealer. Repairs will be made using Ford or Motorcraft® parts, or remanufactured or other parts that are authorized by Ford.
Away From Home
If you are away from home when your vehicle needs service, contact the Ford Customer Relationship Center or use the online resources listed below to find the nearest authorized dealer.
In the United States:
Mailing address
Ford Motor Company Customer Relationship Center P.O. Box 6248 Dearborn, MI 48126
Telephone
1-800-392-3673 (FORD) (TDD for the hearing impaired: 1-800-232-5952)
Additional information and resources are available online:
Website
www.owner.ford.com
These are some of the items that can be found online: · U.S. dealer locator by Dealer Name,
City/State or Zip Code. · Owner Manuals. · Maintenance Schedules. · Recalls. · Ford Extended Service Plans. · Ford Genuine Accessories. · Service specials and promotions. In Canada: Mailing address Customer Relationship Centre Ford Motor Company of Canada, Limited P.O. Box 2000 Oakville, Ontario L6K 0C8 Telephone 1-800-565-3673 (FORD)
Website
www.ford.ca
Twitter @FordServiceCA (English Canada) @FordServiceQC (Quebec)
Additional Assistance
If you have questions or concerns, or are unsatisfied with the service you are receiving, follow these steps: 1. Contact your Sales Representative or
Service Advisor at your selling or servicing authorized dealer.
222
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Customer Assistance
2. If your inquiry or concern remains unresolved, contact the Sales Manager, Service Manager or Customer Relations Manager.
3. If you require assistance or clarification on Ford Motor Company policies, please contact the Ford Customer Relationship Center.
In order to help us serve you better, please have the following information available when contacting a Customer Relationship Center:
· Vehicle Identification Number.
· Your telephone number (home and business).
· The name of the authorized dealer and city where located.
· The vehicle's current odometer reading.
In some states within the United States, you must directly notify Ford in writing before pursuing remedies under your state's warranty laws, and Ford is also allowed a final repair attempt.
Additionally, in some states within the United States, a consumer has the option of submitting a warranty dispute to the BBB Auto Line before taking action under the Magnuson-Moss Warranty Act, or to the extent allowed by state law, before pursuing replacement or repurchase remedies provided by certain state laws. This dispute handling procedure is not required prior to enforcing state created rights or other rights which are independent of the Magnuson-Moss Warranty Act or state replacement or repurchase laws.
IN CALIFORNIA (U.S. ONLY)
California Civil Code Section 1793.2(d) requires that, if a manufacturer or its representative is unable to repair a motor vehicle to conform to the vehicle's applicable express warranty after a reasonable number of attempts, the manufacturer shall be required to either replace the vehicle with one substantially identical or repurchase the vehicle and reimburse the buyer in an amount equal to the actual price paid or payable by the consumer (less a reasonable allowance for consumer use). The consumer has the right to choose whether to receive a refund or replacement vehicle.
California Civil Code Section 1793.22(b) presumes that the manufacturer has had a reasonable number of attempts to conform the vehicle to its applicable express warranties if, within the first 18 months of ownership of a new vehicle or the first 18,000 mi (29,000 km), whichever occurs first:
1. Two or more repair attempts are made on the same non-conformity likely to cause death or serious bodily injury OR
2. Four or more repair attempts are made on the same nonconformity (a defect or condition that substantially impairs the use, value or safety of the vehicle) OR
3. The vehicle is out of service for repair of nonconformities for a total of more than 30 calendar days (not necessarily all at one time).
In the case of 1 or 2 above, the consumer must also notify the manufacturer of the need for the repair of the nonconformity at the following address:
Ford Motor Company 16800 Executive Plaza Drive Mail Drop 3NE-B Dearborn, MI 48126
223
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Customer Assistance
You are required to submit your warranty dispute to BBB AUTO LINE before asserting in court any rights or remedies conferred by California Civil Code Section 1793.22(b). You are also required to use BBB AUTO LINE before exercising rights or seeking remedies created by the Federal Magnuson-Moss Warranty Act, 15 U.S.C. sec. 2301 et seq. If you choose to seek redress by pursuing rights and remedies not created by California Civil Code Section 1793.22(b) or the Magnuson-Moss Warranty Act, resort to BBB AUTO LINE is not required by those statutes.
THE BETTER BUSINESS
BUREAU (BBB) AUTO LINE
PROGRAM (U.S. ONLY)
Your satisfaction is important to Ford Motor Company and to your dealer. If a warranty concern has not been resolved using the three-step procedure outlined earlier in this chapter in the Getting the Services you need section, you may be eligible to participate in the BBB AUTO LINE program.
The BBB AUTO LINE program consists of two parts mediation and arbitration. During mediation, a representative of the BBB will contact both you and Ford Motor Company to explore options for settlement of the claim. If an agreement is not reached during mediation or you do not want to participate in mediation, and if your claim is eligible, you may participate in the arbitration process. An arbitration hearing will be scheduled so that you can present your case in an informal setting before an impartial person. The arbitrator will consider the testimony provided and make a decision after the hearing.
Disputes submitted to the BBB AUTO LINE program are usually decided within forty days after you file your claim with the BBB. You are not bound by the decision, and may reject the decision and proceed to court where all findings of the BBB Auto Line dispute, and decision, are admissible in the court action. Should you choose to accept the BBB AUTO LINE decision, Ford is then bound by the decision, and must comply with the decision within 30 days of receipt of your acceptance letter.
BBB AUTO LINE Application: Using the information provided below, please call or write to request a program application. You will be asked for your name and address, general information about your new vehicle, information about your warranty concerns, and any steps you have already taken to try to resolve them. A Customer Claim Form will be mailed that will need to be completed, signed and returned to the BBB along with proof of ownership. Upon receipt, the BBB will review the claim for eligibility under the Program Summary Guidelines.
You can get more information by calling BBB AUTO LINE at 1-800-955-5100, or writing to:
BBB AUTO LINE 3033 Wilson Boulevard, Suite 600 Arlington, Virginia 22201
BBB AUTO LINE applications can also be requested by calling the Ford Motor Company Customer Relationship Center at 1-800-392-3673.
Note: Ford Motor Company reserves the right to change eligibility limitations, modify procedures, or to discontinue this process at any time without notice and without obligation.
224
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Customer Assistance
UTILIZING THE
MEDIATION/ARBITRATION
PROGRAM (CANADA ONLY)
For vehicles delivered to authorized Canadian dealers. In those cases where you continue to feel that the efforts by Ford of Canada and the authorized dealer to resolve a factory-related vehicle service concern have been unsatisfactory, Ford of Canada participates in an impartial third party mediation/arbitration program administered by the Canadian Motor Vehicle Arbitration Plan (CAMVAP).
The CAMVAP program is a straight forward and relatively speedy alternative to resolve a disagreement when all other efforts to produce a settlement have failed. This procedure is without cost to you and is designed to eliminate the need for lengthy and expensive legal proceedings.
In the CAMVAP program, impartial third-party arbitrators conduct hearings at mutually convenient times and places in an informal environment. These impartial arbitrators review the positions of the parties, make decisions and, when appropriate, render awards to resolve disputes. CAMVAP decisions are fast, fair, and final as the arbitrator's award is binding on both you and Ford of Canada.
CAMVAP services are available in all Canadian territories and provinces. For more information, without charge or obligation, call your CAMVAP Provincial Administrator directly at 1-800-207-0685 or visit www.camvap.ca.
GETTING ASSISTANCE OUTSIDE THE U.S. AND CANADA
Before exporting your vehicle to a foreign country, contact the appropriate foreign embassy or consulate. These officials can inform you of local vehicle registration regulations and where to find unleaded fuel or petrol/gas engines or the proper sulfur fuel for diesel engines.
If you cannot find the proper fuel recommended for your vehicle, contact our Customer Relationship Center.
The use of improper fuels in your vehicle without proper conversion may damage the effectiveness of your emission control system and may cause engine knocking or serious engine damage. Ford Motor Company or Ford of Canada is not responsible for any damage caused by use of improper fuel. Using improper fuels may also result in difficulty importing your vehicle back into the United States.
If your vehicle must be serviced while you are traveling or living in Asia-Pacific Region, Sub-Saharan Africa, U.S. Virgin Islands and/or Puerto Rico, Central America, the Caribbean, and Israel and the Middle East, contact the nearest authorized dealer. If the authorized dealer cannot help you, contact the corresponding Ford Customer Assistance Center:
FORD MOTOR COMPANY
Customer Relationship Centers in:
225
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Customer Assistance
Customer Relationship Center
Phone
Asia Pacific
N/A
Caribbean and Central America
+1 313 594 4857
Ford 80004443673
Lincoln 80004441066
Middle East
UAE 80004441066
Saudi Arabia 8008443673
Mobily and Zain cell phone users in Saudi
800850078
North Africa
N/A
Puerto Rico and U.S. Virgin Islands
+1-800-841-3673
Sub-Saharan Africa +1-313-594-4857
South Korea
+82-02-1600-6003
Fax N/A
-
971 4 3327 266
N/A N/A N/A N/A
E-mail apemcrc@ford.com expcac@ford.com
menacac@ford.com
nafcrc@ford.com prcac@ford.com ssacrc@ford.com infokr1@ford.com or infokr@lincoln.com
If you buy your vehicle in North America and then relocate to any of the above locations, register your vehicle identification number (VIN) and new address with Ford Global Trade Services by emailing, expcso@ford.com.
If you are in another foreign country, contact the nearest authorized dealer. In the event your inquiry is unresolved, communicate your concern with the dealership's Sales Manager, Service Manager or Customer Relations Manager. If you require additional assistance or clarification, please contact the respective Customer Relationship Center as previously listed.
Customers in the U.S. should call 1-800-392-3673.
226
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Customer Assistance
ORDERING ADDITIONAL OWNER'S LITERATURE
To order the publications in this portfolio, contact Helm, Incorporated at: HELM, INCORPORATED 47911 Halyard Drive Plymouth, Michigan 48170 Attention: Customer Service Or to order a free publication catalog, call toll free: 1-800-782-4356 Monday-Friday 8:00 a.m. - 6:00 p.m. EST Helm, Incorporated can also be reached by their website: www.helminc.com (Items in this catalog may be purchased by credit card, check or money order.)
Obtaining a French Owner's Manual
French Owner's Manual can be obtained from your authorized dealer or by contacting Helm, Incorporated using the contact information listed previously in this section.
REPORTING SAFETY DEFECTS (U.S. ONLY)
E142557
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform the National Highway Traffic Safety Administration (NHTSA) in addition to notifying Ford Motor Company.
If NHTSA receives similar complaints, it may open an investigation, and if it finds that a safety defect exists in a group of vehicles, it may order a recall and remedy campaign. However, NHTSA cannot become involved in individual problems between you, your dealer, or Ford Motor Company.
To contact NHTSA, you may call the Vehicle Safety Hotline toll-free at 1-888-327-4236 (TTY: 1-800-424-9153); go to http://www.safercar.gov; or write to:
Administrator
1200 New Jersey Avenue, Southeast
Washington, D.C. 20590
You can also obtain other information about motor vehicle safety from http://www.safercar.gov.
REPORTING SAFETY DEFECTS (CANADA ONLY)
If you believe that your vehicle has a defect which could cause a crash or could cause injury or death, you should immediately inform Transport Canada and Ford of Canada.
227
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Customer Assistance
Website Website Phone
Transport Canada Contact Information
http://www.tc.gc.ca/eng/motorvehiclesafety/reporting-defects-motorvehicles.html (English)
http://www.tc.gc.ca/fra/securiteautomobile/signaler-defauts-vehiculesautomobiles.html (French)
18003330510
Website Phone
Ford of Canada Contact Information www.ford.ca 1800565-3673
228
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuses
FUSE SPECIFICATION CHART
Pre-Fuse Box
The pre-fuse box is in the engine compartment attached to the positive battery post. This box contains several high current fuses. If you need to replace one of these high current fuses, see an authorized dealer.
Power Distribution Box
WARNINGS Always disconnect the battery before servicing high current fuses.
WARNINGS To reduce risk of electrical shock, always replace the cover to the power distribution box before reconnecting the battery or refilling fluid reservoirs.
The power distribution box is in the engine compartment. It has high-current fuses that protect your vehicle's main electrical systems from overloads.
You will need to reset some features if you disconnect and reconnect the battery. See Changing the 12V Battery (page 253).
E157389
Lift the release lever at the rear of the cover to remove it.
229
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuses
Fuse or Relay Number F7 F8 F9
F10 F11 F12 F13 F14 F15 F16 F17
F18 F19 F20 F21 F22 F23
Fuse Rating
50A1
30A1 40A1 50A1 40A1 30A1
30A1 30A1 25A1 20A1 25A1
40A1 50A1 20A1 5A2
15A2 5A2 15A2 5A2
Protected Component
Anti-lock brake system and electronic stability program pump. Electronic stability program valve. Cooling fan (600 Watt) Cooling fan (390 Watt and 750 Watt). Heater blower motor. Body control module power feed. Voltage quality module. Powertrain control module relay. Starter relay. Cooling fan (600 Watt and 750 Watt). Front cigar lighter or power outlet. Front power window (without door control unit). Cooling fan (600 Watt). Cooling fan (750 Watt). Center power outlet. Anti-lock brake system and electronic stability program 15 feed. Horn. Stop light switch. Battery monitor system. Relay coils.
230
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuse or Relay Number F24 F25 F26 F27 F28
F29 F30 F31 F32
F33
F34 F35
F36 F37 F38 F39
Fuses
Fuse Rating
5A2 10A2 25A2 15A2 10A2
-- 10A2 5A2 15A2 10A2 10A2 15A2 10A2 15A2 10A2 5A2 10A2 5A2
20A2
Protected Component
Light switch module. Occupant classification system. Oil pump. Air conditioner clutch. Vehicle power - fuel injector (2.5L engine). Blind spot information system and rear view camera (stop/start equipped vehicles). Not used. Partially heated windshield. Powertrain control relay coil. Vehicle power (2.0L and 2.5L engine). Vehicle power (1.5L engine). Vehicle power 2 (2.0L and 2.5L engine). Vehicle power 2 (1.5L engine). Vehicle power 3. Vehicle power 4 (2.0L and 2.5L engine). Vehicle power 4 (1.5L engine). Active grille shutters. Passenger airbag deactivation indicator. Engine control module and transmission control module ignition feed. Heated driver seat.
231
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuse or Relay Number F40
F41
F42
F43
F44
F45
F46
F47 F48
R1 R2 R3 R4 R5 R6 R7 R8 R9 R10 R11 R12 R13 R14
Fuses
Fuse Rating
5A2 20A2 15A2 15A2 5A2 20A2 40A1
-- 5A2 Micro relay Micro relay -- -- Micro relay Micro relay Power relay Mini Relay -- Mini relay Micro relay Power relay Mini relay Mini relay
Protected Component
Electronic power assist steering 15 feed. Body control module 15 feed. Rear wiper. Headlamp control module supply. Forward looking radar. Heated passenger seat. Smart wiper motor modules. Not used. Keypad. Cooling fan (750 Watt). Horn. Not used. Not used. Cooling fan (750 Watt). Cooling fan (600 Watt and 750 Watt). Partially heated windshield. High current power windows front. Not used. Starter relay. Air conditioner clutch. Cooling fan. Heater blower. Engine control relay.
232
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuses
Fuse or Relay Number
R15
R16 1 Cartridge Fuse 2 Mini Fuse
Fuse Rating
Power relay Power relay
Passenger Compartment Fuse Panel
The fuse panel is on the right side below the glove box.
Protected Component
Cooling fan (600 Watt and 750 Watt). Ignition 15.
233
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuses
E129926
Fuse or Relay Number F56 F57 F58 F59 F60
Fuse Rating
20A -- 5A 5A 10A
Protected Component
Fuel pump supply. Not used. Interior lights relay. Passive anti-theft transceiver. Interior light. Driver door switch pack. Glove box light.
234
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuse or Relay Number
F61
F62
F63
F64 F65 F66 F67
F68 F69 F70 F71
F72 F73 F74 F75 F76 F77 F78
F79
Fuses
Fuse Rating
20A 5A 10A -- 10A 20A 7.5A
15A 5A 20A 7.5A
7.5A 7.5A 15A 15A 10A 20A 5A
15A
Protected Component
Overhead console switch bank.
Cigar lighter. Power point.
Rain sensor module. Light sensor module.
Front sensing module. Forward looking radar.
Not used.
Liftgate release.
Driver door unlock.
SYNC. Multifunction display. Global positioning system module.
Not used (spare).
Instrument cluster.
Central lock and unlock supply.
Heating control head (manual air conditioner). Dual electronic automatic temperature control.
Data link connector.
Steering wheel module.
Headlamp supply.
Fog lamp.
Reversing lamp.
Washer pump.
Ignition switch. Start button. Keyless vehicle module.
Radio. Electronic finish panel.
235
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuses
Fuse or Relay Number
F80 F81
F82 F83 F84
F85 F86
F87 F88 F89
Fuse Rating
20A 5A 20A 20A 20A 7.5A 10A
15A -- --
Protected Component
Hazard light switch. Door lock switch. Moonroof supply. Radio frequency receiver supply. Panorama roof power/open. Washer pump. Central locking. Lock/unlock relay. Liftgate relay. Electronic 15 feed. Airbag module. Occupant classification system. Passenger airbag deactivation indicator. Heated steering wheel. Not used. Not used.
Luggage Compartment Fuse Panel
The fuse panel is in the luggage compartment behind the passenger side wheel well. Remove the fuse panel cover to gain access to the fuses.
236
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuses
E129927
Fuse or Relay Number F1 F2
F3 F4 F5 F6 F7 F8 F9 F10 F11 F12 F13 F14 F15
Fuse Rating
5A 15A
5A 25A 25A 25A 25A 25A 25A 5A 5A
-- -- 25A --
Protected Component
Hands-free liftgate entry module. Heated outside mirror (without door control unit). Heated wiper park. Keyless vehicle door handles. Door control unit front left. Door control unit front right. Door control unit rear left. Door control unit rear right. Passenger seat. Driver seat. Driver seat memory module logic feed. Rear ignition coil feed. Not used. Not used. High current power windows (front relay). Not used (vehicles with one-touch up power windows).
237
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuse or Relay Number F16 F17 F18 F19 F20 F21 F22 F23 F24
F25 F26 F27 F28
F29
F30 F31 F32 F33 F34 F35 F36
Fuses
Fuse Rating
-- -- -- -- 5A -- 25A 25A 30A 40A
25A 20A 20A 40A
30A
5A
5A -- 5A 10A -- -- --
Protected Component
Not used. Not used. Not used. Not used. Embedded modem. Not used. Heated rear window. Audio amplifier. DC/AC power converter. Trailer tow (vehicles without one-touch up power windows). Power liftgate. Rear power outlet. Luggage compartment power outlet. Trailer tow (vehicles with one-touch up power windows). Driver and passenger high current power windows (vehicles without one-touch up power windows). Blind spot detection system. Rear view camera with park assist. Parking aid module. Not used. DC/AC power converter. High current power window switch. Not used. Not used. Not used.
238
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuses
Fuse or Relay Number F37 F38 F39 F40 F41 F42 F43 F44 F45 F46 R1 R2 R3 R4 R5 R6
Fuse Rating
-- -- -- -- -- -- -- -- -- 5A Power relay Mini relay Micro relay -- -- Micro relay
Protected Component
Not used. Not used. Not used. Not used. Not used. Not used. Not used. Not used. Not used. Heated outside mirror relay coil. Delay accessory relay. Rear 15 relay. Heated rear window relay. Not used. Not used. Heated outside mirror relay.
CHANGING A FUSE
Fuses
WARNING
Always replace a fuse with one that has the specified amperage rating. Using a fuse with a higher amperage rating can cause severe wire damage and could start a fire.
E217331
If electrical components in the vehicle are not working, a fuse may have blown. Blown fuses are identified by a broken wire within the fuse. Check the appropriate fuses before replacing any electrical components.
239
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Fuse Types
Fuses
E207206
Callout A B C D E F G
Fuse Type Micro 2 Micro 3 Maxi Mini M Case J Case
J Case Low Profile
240
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
GENERAL INFORMATION
Have your vehicle serviced regularly to help maintain its roadworthiness and resale value. There is a large network of authorized dealers that are there to help you with their professional servicing expertise. We believe that their specially trained technicians are best qualified to service your vehicle properly and expertly. They are supported by a wide range of highly specialized tools developed specifically for servicing your vehicle.
If your vehicle requires professional service, an authorized dealer can provide the necessary parts and service. Check your warranty information to find out which parts and services are covered.
Use only recommended fuels, lubricants, fluids and service parts conforming to specifications. Motorcraft® parts are designed and built to provide the best performance in your vehicle.
Precautions
· Do not work on a hot engine.
· Make sure that nothing gets caught in moving parts.
· Do not work on a vehicle with the engine running in an enclosed space, unless you are sure you have enough ventilation.
· Keep all open flames and other burning material (such as cigarettes) away from the battery and all fuel related parts.
Working with the Engine Off
1. Set the parking brake and shift to park (P).
2. Switch off the engine.
3. Block the wheels.
Working with the Engine On WARNING
To reduce the risk of vehicle damage and/or personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running. 1. Set the parking brake and shift to park (P). 2. Block the wheels.
OPENING AND CLOSING THE HOOD Opening the Hood
E142457
1. Pull the hood release lever. 2. Slightly lift the hood.
241
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
E142458
3. Move the catch to the right to release the hood.
E87786
4. Open the hood and support it with the hood strut.
Closing the Hood
1. Remove the hood strut from the catch and secure it correctly in the clip.
2. Lower the hood and allow it to drop under its own weight for the last 812 in (2030 cm).
Note: Make sure that the hood is correctly closed.
UNDER HOOD OVERVIEW - 1.5L ECOBOOSTTM
242
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
E268785
A Engine coolant reservoir. See Engine Coolant Check (page 248).
B Windshield washer fluid. See Washer Fluid Check (page 253).
C Engine oil filler cap. See Engine Oil Check (page 246).
D Engine oil dipstick. See Engine Oil Dipstick (page 246).
E Brake fluid reservoir. See Brake Fluid Check (page 252).
F Battery. See Changing the 12V Battery (page 253).
G Power distribution box. See Changing a Fuse (page 239).
H Air filter. See Changing the Engine Air Filter (page 264).
UNDER HOOD OVERVIEW - 2.0L ECOBOOSTTM
243
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
E146022
A Engine coolant reservoir: See Engine Coolant Check (page 248).
B Engine oil dipstick: See Engine Oil Dipstick (page 246).
C Brake fluid reservoir: See Brake Fluid Check (page 252).
D Battery: See Changing the 12V Battery (page 253).
UNDER HOOD OVERVIEW - 2.5L
E Power distribution box: See Fuses (page 229).
F Air filter assembly: See Changing the Engine Air Filter (page 264).
G Engine oil filler cap: See Engine Oil Check (page 246).
H Windshield washer fluid reservoir: See Washer Fluid Check (page 253).
244
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
E260255
A Windshield washer fluid reservoir: See Washer Fluid Check (page 253).
B Engine coolant reservoir: See Engine Coolant Check (page 248).
C Engine oil filler cap: See Engine Oil Check (page 246).
D Engine oil dipstick: See Engine Oil Dipstick (page 246).
E Brake fluid reservoir: See Brake Fluid Check (page 252).
F Battery: See Changing the 12V Battery (page 253).
G Power distribution box: See Fuses (page 229).
H Air filter assembly: See Changing the Engine Air Filter (page 264).
245
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
ENGINE OIL DIPSTICK - 1.5L ECOBOOSTTM
E250657
A B
Minimum. Maximum.
ENGINE OIL DIPSTICK - 2.0L ECOBOOSTTM/2.5L
E250320
A B C
Minimum. Nominal. Maximum.
ENGINE OIL CHECK
To check the engine oil level consistently and accurately, do the following:
1. Make sure the parking brake is on. Make sure the transmission is in park (P) or neutral (N).
2. Run the engine until it reaches normal operating temperature.
3. Make sure that your vehicle is on level ground.
4. Switch the engine off and wait 15 minutes for the oil to drain into the oil pan. Checking the engine oil level too soon after you switch the engine off may result in an inaccurate reading.
5. Open the hood. See Opening and Closing the Hood (page 241).
6. Remove the dipstick and wipe it with a clean, lint-free cloth. See Under Hood Overview (page 242).
7. Replace the dipstick and remove it again to check the oil level. See Under Hood Overview (page 242).
8. Make sure that the oil level is between the maximum and minimum marks. If the oil level is at the minimum mark, add oil immediately. See Capacities and Specifications (page 307).
9. If the oil level is correct, replace the dipstick and make sure it is fully seated.
Note: Do not remove the dipstick when the engine is running.
Note: If the oil level is between the maximum and minimum marks, the oil level is acceptable. Do not add oil.
Note: The oil consumption of new engines reaches its normal level after approximately 3,000 mi (5,000 km).
Adding Engine Oil
WARNING
Do not remove the filler cap when the engine is running.
246
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by the vehicle Warranty.
E142732
Only use oils certified for gasoline engines by the American Petroleum Institute (API). An oil with this trademark symbol conforms to the current engine and emission system protection standards and fuel economy requirements of the International Lubricants Specification Advisory Committee (ILSAC). To top up the engine oil level do the following: 1. Clean the area surrounding the engine
oil filler cap before you remove it. 2. Remove the engine oil filler cap. See
Under Hood Overview (page 242). Turn it counterclockwise and remove it. 3. Add engine oil that meets Ford specifications. See Capacities and Specifications (page 307). You may have to use a funnel to pour the engine oil into the opening. 4. Recheck the oil level. 5. If the oil level is correct, replace the dipstick and make sure it is fully seated. 6. Replace the engine oil filler cap. Turn it clockwise until you feel a strong resistance.
Note: Do not add oil further than the maximum mark. Oil levels above the maximum mark may cause engine damage.
Note: Make sure you install the oil filler cap correctly.
Note: Soak up any spillage with an absorbent cloth immediately.
OIL CHANGE INDICATOR RESET
Use the information display controls on the steering wheel to reset the oil change indicator.
From the main menu scroll to:
Message
Action and description
Settings
Press the right arrow button, then from this menu scroll to the following message.
Vehicle
Press the right arrow button, then from this menu scroll to the following message.
Oil Life
Press the right arrow button, then from this menu scroll to the following message.
Hold OK to Press and hold the OK
Reset
button until the instrument
cluster displays the
following message.
Reset Successful
When the oil change indicator resets the instrument cluster displays 100%.
Remaining Life
{00}%
247
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
Message
Action and description
If the instrument cluster displays one of the following messages, repeat the process.
Not Reset
Reset Cancelled
ENGINE COOLANT CHECK
WARNINGS Do not remove the coolant reservoir cap when the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury.
Do not put coolant in the windshield washer reservoir. If sprayed on the windshield, coolant could make it difficult to see through the windshield.
To reduce the risk of personal injury, make sure the engine is cool before unscrewing the coolant pressure relief cap. The cooling system is under pressure. Steam and hot liquid can come out forcefully when you loosen the cap slightly.
Do not add coolant further than the MAX mark.
When the engine is cold, check the concentration and level of the coolant at the intervals listed in the scheduled maintenance information. See Scheduled Maintenance (page 455).
Note: Make sure that the coolant level is between the MIN and MAX marks on the coolant reservoir.
Note: Coolant expands when it is hot. The level may extend beyond the MAX mark.
Maintain coolant concentration within 48% to 50%, which equates to a freeze point between -29°F (-34°C) and -35°F (-37°C). Coolant concentration should be checked using a refractometer. We do not recommend the use of hydrometers or coolant test strips for measuring coolant concentration.
Adding Coolant
WARNINGS
Do not add engine coolant when the engine is hot. Failure to follow this instruction could result in personal injury.
Do not remove the coolant reservoir cap when the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury.
Note: Automotive fluids are not interchangeable. Take care not to put engine coolant in the windshield washer fluid reservoir or windshield washer fluid in the engine coolant reservoir.
Note: Do not use stop leak pellets, cooling system sealants, or non-specified additives as they can cause damage to the engine cooling or heating systems. Resulting component damage may not be covered by the vehicle Warranty.
248
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
It is very important to use prediluted coolant approved to the correct specification in order to avoid plugging the small passageways in the engine cooling system. See Capacities and Specifications (page 300). Do not mix different colors or types of coolant in your vehicle. Mixing of engine coolants or using an incorrect coolant may harm the engine or cooling system components and may not be covered by the vehicle Warranty.
Note: If prediluted coolant is not available, use the approved concentrated coolant diluting it to 50/50 with distilled water. See Capacities and Specifications (page 300). Using water that has not been deionised may contribute to deposit formation, corrosion and plugging of the small cooling system passageways.
Note: Coolants marketed for all makes and models may not be approved to our specifications and may cause damage to the cooling system. Resulting component damage may not be covered by the vehicle Warranty.
If the coolant level is at or below the minimum mark, add prediluted coolant immediately.
To top up the coolant level do the following:
1. Unscrew the cap slowly. Any pressure escapes as you unscrew the cap.
2. Add prediluted coolant approved to the correct specification. See Capacities and Specifications (page 300).
3. Add enough prediluted coolant to reach the correct level.
4. Replace the coolant reservoir cap, turn it clockwise until you feel a strong resistance.
5. Check the coolant level in the coolant reservoir the next few times you drive your vehicle. If necessary, add enough prediluted engine coolant to bring the coolant level to the correct level.
If you have to add more than 1.1 qt (1 L) of engine coolant per month, have your vehicle checked as soon as possible. Operating an engine with a low level of coolant can result in engine overheating and possible engine damage.
Note: During normal vehicle operation, the coolant may change color from orange to pink or light red. As long as the coolant is clear and uncontaminated, this color change does not indicate the coolant has degraded nor does it require the coolant to be drained, the system to be flushed, or the coolant to be replaced.
In case of emergency, you can add a large amount of water without engine coolant in order to reach a vehicle service location. In this instance, qualified personnel:
1. Must drain the cooling system.
2. Chemically clean the coolant system.
3. Refill with engine coolant as soon as possible.
Water alone, without engine coolant, can cause engine damage from corrosion, overheating or freezing.
Do not use the following as a coolant substitute:
· Alcohol.
· Methanol.
· Brine.
· Any coolant mixed with alcohol or methanol antifreeze.
Alcohol and other liquids can cause engine damage from overheating or freezing.
249
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
Do not add extra inhibitors or additives to the coolant. These can be harmful and compromise the corrosion protection of the coolant.
Recycled Coolant
We do not recommend the use of recycled coolant as an approved recycling process is not yet available.
Dispose of used engine coolant in an appropriate manner. Follow your community's regulations and standards for recycling and disposing of automotive fluids.
Severe Climates
If you drive in extremely cold climates:
· It may be necessary to increase the coolant concentration above 50%.
· A coolant concentration of 60% provides improved freeze point protection. Coolant concentrations above 60% decrease the overheat protection characteristics of the coolant and may cause engine damage.
If you drive in extremely hot climates:
· You can decrease the coolant concentration to 40%.
· Coolant concentrations below 40% decrease the freeze and corrosion protection characteristics of the coolant and may cause engine damage.
Vehicles driven year-round in non-extreme climates should use prediluted coolant for optimum cooling system and engine protection.
Coolant Change
At specific mileage intervals, as listed in the scheduled maintenance information, the coolant should be changed. Add prediluted coolant approved to the correct specification. See Capacities and Specifications (page 300).
Fail-Safe Cooling
Fail-safe cooling allows you to temporarily drive your vehicle before any incremental component damage occurs. The fail-safe distance depends on ambient temperature, vehicle load and terrain.
How Fail-Safe Cooling Works
If the engine begins to overheat, the coolant temperature gauge moves toward the red zone:
A warning lamp illuminates and a message may appear in the information display.
If the engine reaches a preset over-temperature condition, the engine automatically switches to alternating cylinder operation. Each disabled cylinder acts as an air pump and cools the engine.
When this occurs, your vehicle still operates, however:
· Engine power is limited.
· The air conditioning system turns off.
Continued operation increases the engine temperature, causing the engine to completely shut down. Your steering and braking effort increases in this situation.
When the engine temperature cools, you can re-start the engine. Have your vehicle checked as soon as possible to minimize engine damage.
250
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
When Fail-Safe Mode Is Activated
WARNINGS
Fail-safe mode is for use during emergencies only. Operate your vehicle in fail-safe mode only as long as necessary to bring your vehicle to rest in a safe location and seek immediate repairs. When in fail-safe mode, your vehicle will have limited power, will not be able to maintain high-speed operation, and may completely shut down without warning, potentially losing engine power, power steering assist, and power brake assist, which may increase the possibility of a crash resulting in serious injury.
Do not remove the coolant reservoir cap when the cooling system is hot. Wait 10 minutes for the cooling system to cool down. Cover the coolant reservoir cap with a thick cloth to prevent the possibility of scalding and slowly remove the cap. Failure to follow this instruction could result in personal injury.
Your vehicle has limited engine power when in the fail-safe mode, drive your vehicle with caution. Your vehicle does not maintain high-speed operation and the engine may operate poorly.
Remember that the engine is capable of automatically shutting down to prevent engine damage. In this situation:
1. Pull off the road as soon as safely possible and switch the engine off.
2. If you are a member of a roadside assistance program, we recommend that you contact your roadside assistance service provider.
3. If this is not possible, wait a short period for the engine to cool.
4. Check the coolant level. If the coolant level is at or below the minimum mark, add prediluted coolant immediately.
5. When the engine temperature cools, you can re-start the engine. Have your vehicle checked as soon as possible to minimize engine damage.
Note: Driving your vehicle without repair increases the chance of engine damage.
Engine Coolant Temperature Management (If Equipped)
WARNING
To reduce the risk of crash and injury, be prepared that the vehicle speed may reduce and the vehicle may not be able to accelerate with full power until the coolant temperature reduces.
If you tow a trailer with your vehicle, the engine may temporarily reach a higher temperature during severe operating conditions, for example ascending a long or steep grade in high ambient temperatures.
At this time, you may notice the coolant temperature gauge moves toward the red zone and a message may appear in the information display.
You may notice a reduction in vehicle speed caused by reduced engine power in order to manage the engine coolant temperature. Your vehicle may enter this mode if certain high-temperature and high-load conditions take place. The amount of speed reduction depends on vehicle loading, grade and ambient temperature. If this occurs, there is no need to stop your vehicle. You can continue to drive.
The air conditioning may automatically turn on and off during severe operating conditions to protect the engine from overheating. When the coolant temperature decreases to the normal operating temperature, the air conditioning turns on.
251
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
If the coolant temperature gauge moves fully into the red zone, or if the coolant temperature warning or service engine soon messages appear in your information display, do the following:
1. Stop your vehicle as soon as it is safe to do so. Fully apply the parking brake, shift into park (P) or neutral (N).
2. Leave the engine running until the coolant temperature gauge needle returns to the normal position. After several minutes, if the temperature does not drop, follow the remaining steps.
3. Switch the engine off and wait for it to cool. Check the coolant level.
4. If the coolant level is at or below the minimum mark, add prediluted coolant immediately.
5. If the coolant level is normal, restart the engine and continue.
AUTOMATIC TRANSMISSION FLUID CHECK
The automatic transmission does not have a transmission fluid dipstick.
Have an authorized dealer check and change the transmission fluid at the correct service interval. See Scheduled Maintenance (page 455). Your transmission does not consume fluid. However, if the transmission slips, shifts slowly or if you notice a sign of leaking fluid, contact an authorized dealer.
Do not use supplemental transmission fluid additives, treatments or cleaning agents. The use of these materials may affect transmission operation and result in damage to internal transmission components.
BRAKE FLUID CHECK
WARNINGS
Do not use any fluid other than the recommended brake fluid as this will reduce brake efficiency. Use of incorrect fluid could result in the loss of vehicle control, serious personal injury or death.
Only use brake fluid from a sealed container. Contamination with dirt, water, petroleum products or other materials may result in brake system damage or failure. Failure to adhere to this warning could result in the loss of vehicle control, serious personal injury or death.
Do not allow the fluid to touch your skin or eyes. If this happens, rinse the affected areas immediately with plenty of water and contact your physician.
A fluid level between the MAX and MIN lines is within the normal operating range and there is no need to add fluid. A fluid level not in the normal operating range could compromise the performance of the system. Have your vehicle checked immediately.
252
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
E170684
To avoid fluid contamination, the reservoir cap must remain in place and fully tight, unless you are adding fluid. Only use fluid that meets Ford specifications. See Capacities and Specifications (page 300).
POWER STEERING FLUID CHECK
Your vehicle is equipped with an electric power steering (EPS) system. There is no fluid reservoir to check or fill.
WASHER FLUID CHECK
WARNING If you operate your vehicle in temperatures below 41.0°F (5°C), use washer fluid with antifreeze protection. Failure to use washer fluid with antifreeze protection in cold weather could result in impaired windshield vision and increase the risk of injury or accident.
Note: The front and rear washer systems are supplied from the same reservoir.
Add fluid to fill the reservoir if the level is low. Only use a washer fluid that meets our specifications. See Capacities and Specifications (page 300).
State or local regulations on volatile organic compounds may restrict the use of methanol, a common windshield washer antifreeze additive. Washer fluids containing non-methanol antifreeze agents should be used only if they provide cold weather protection without damaging the vehicle's paint finish, wiper blades or washer system.
FUEL FILTER
Your vehicle is equipped with a lifetime fuel filter that is integrated with the fuel tank. Regular maintenance or replacement is not needed.
CHANGING THE 12V BATTERY
WARNINGS Batteries normally produce explosive gases which can cause personal injury. Therefore, do not allow flames, sparks or lighted substances to come near the battery. When working near the battery, always shield your face and protect your eyes. Always provide correct ventilation.
When lifting a plastic-cased battery, excessive pressure on the end walls could cause acid to flow through the vent caps, resulting in personal injury and damage to the vehicle or battery. Lift the battery with a battery carrier or with your hands on opposite corners.
253
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
WARNINGS
Keep batteries out of reach of children. Batteries contain sulfuric acid. Avoid contact with skin, eyes or clothing. Shield your eyes when working near the battery to protect against possible splashing of acid solution. In case of acid contact with skin or eyes, flush immediately with water for a minimum of 15 minutes and get prompt medical attention. If acid is swallowed, call a physician immediately.
Battery posts, terminals and related accessories contain lead and lead compounds. Wash hands after handling.
This vehicle may have more than one battery. Removing the battery cables from only one battery does not disconnect your vehicle electrical system. Make sure you disconnect the battery cables from all batteries when disconnecting power. Failure to do so may cause serious personal injury or property damage.
Your vehicle is fitted with a Motorcraft maintenance-free battery which normally does not require additional water.
When a battery replacement is required, you must use a recommended replacement battery that matches the electrical requirements of the vehicle.
Note: After cleaning or replacing the battery, make sure you reinstall the battery cover or shield.
Note: If you add electrical accessories or components to the vehicle, it may adversely affect the low voltage battery performance and durability. This may also affect the performance of other electrical systems in the vehicle.
For longer, trouble-free operation, keep the top of the battery clean and dry.
If you see any corrosion on the battery or terminals, remove the cables from the terminals and clean with a wire brush. You can neutralize the acid with a solution of baking soda and water.
Because your vehicle's engine is electronically controlled by a computer, some control conditions are maintained by power from the battery. When the battery is disconnected or a new battery is installed, the engine must relearn its idle and fuel trim strategy for optimum driveability and performance. Flexible fuel vehicles (FFV) must also relearn the ethanol content of the fuel for optimum driveability and performance.
To restore the settings, do the following:
1. Apply the parking brake.
2. Shift into park (P) or neutral (N).
3. Switch off all accessories.
4. Press the brake pedal and start your vehicle.
5. Run the engine until it reaches normal operating temperature. While the engine is warming up, complete the following: Reset the clock. Reset the power windows bounce-back feature. See Windows and Mirrors (page 81). Reset the radio station presets. See Audio System (page 321).
6. Allow the engine to idle for at least one minute.
7. Drive the vehicle at least 10 mi (16 km) to completely relearn the idle trim and fuel trim strategy.
Note: If you do not allow the engine to relearn the idle and fuel trim strategy, the idle quality of your vehicle may be adversely affected until the engine computer eventually relearns the idle trim and fuel trim strategy.
254
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
Note: For flexible fuel vehicles, if you are operating on E85, you may experience poor starts or an inability to start the engine and driveability problems until the fuel trim and ethanol content have been relearned.
Make sure that you dispose of old batteries in an environmentally friendly way. Seek advice from your local authority about recycling old batteries.
If storing your vehicle for more than 30 days without recharging the battery, we recommend that you disconnect the battery cables to maintain battery charge for quick starting.
Battery Management System (If
Equipped)
The battery management system monitors battery conditions and takes actions to extend battery life. If excessive battery drain is detected, the system temporarily disables some electrical systems to protect the battery.
Systems included are:
· Heated rear window.
· Heated seats.
· Climate control.
· Heated steering wheel.
· Audio unit.
· Navigation system.
A message may appear in the information displays to alert you that battery protection actions are active. These messages are only for notification that an action is taking place, and not intended to indicate an electrical problem or that the battery requires replacement.
After battery replacement, or in some cases after charging the battery with an external charger, the battery management system requires eight hours of vehicle sleep time to relearn the battery state of charge. During this time your vehicle must remain fully locked with the ignition switched off. Note: Prior to relearning the battery state of charge, the battery management system may temporarily disable some electrical systems.
Electrical Accessory Installation
To make sure the battery management system works correctly, do not connect an electrical device ground connection directly to the battery negative post. This can cause inaccurate measurements of the battery condition and potential incorrect system operation. Note: If you add electrical accessories or components to the vehicle, it may adversely affect battery performance and durability. This may also affect the performance of other electrical systems in the vehicle.
CHECKING THE WIPER BLADES
E142463
Run the tip of your fingers over the edge of the blade to check for roughness. Clean the wiper blades with washer fluid or water applied with a soft sponge or cloth.
255
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
CHANGING THE WIPER BLADES
You can improve poor wiper quality by cleaning the wiper blades and the windshield. Replace the wiper blades at least annually for optimum performance.
Front Wiper Blades
Rear Window Wiper Blade
1
1
E129990
2
1. Lift the wiper arm and then press the wiper blade locking buttons together.
Note: Do not hold the wiper blade when lifting the wiper arm.
Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached.
2. Slightly rotate the wiper blade.
3. Remove the wiper blade.
4. Install in the reverse order.
Note: Make sure that the wiper blade locks into place.
E271380
1. Lift the wiper arm. Note: Do not hold the wiper blade when lifting the wiper arm. Note: Make sure that the wiper arm does not spring back against the glass when the wiper blade is not attached. 2. Remove the wiper blade. Note: Make sure that the wiper blade locks into place.
ADJUSTING THE HEADLAMPS
Vertical Aim Adjustment
The headlamps on your vehicle are properly aimed at the assembly plant. If your vehicle has been in an accident, the alignment of your headlamps should be checked by your authorized dealer.
256
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
E142592
A B C D
8 feet (2.4 meters) Center height of lamp to ground 25 feet (7.6 meters) Horizontal reference line
Vehicles With Halogen Headlamps
1. Park the vehicle directly in front of a wall or screen on a level surface, approximately 25 ft (7.6 m) away.
2. Measure the height of the headlamp bulb center from the ground and mark an 8 ft (2.4 m) horizontal reference line on the vertical wall or screen at this height.
Note: To see a clearer light pattern for adjusting, you may want to block the light from one headlamp when adjusting the other.
3. Switch on the low beam headlamps to illuminate the wall or screen and open the hood.
E142465
4. On the wall or screen you will observe a flat zone of high intensity light located at the top of the right hand portion of the beam pattern. If the top edge of the high intensity light zone is not at the horizontal reference line, the headlamp does need to be adjusted.
E142467
5. Locate the vertical adjuster on each headlamp. Using a Phillips #2 screwdriver, turn the adjuster either clockwise or counterclockwise in order to aim the headlamp. The horizontal edge of the brighter light should touch the horizontal reference line.
6. Close the hood and switch off the lamps.
257
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
Vehicles With High Intensity Discharge Headlamps 1. Park the vehicle directly in front of a
wall or screen on a level surface, approximately 25 ft (7.6 m) away. 2. Measure the height of the headlamp bulb center from the ground and mark an 8 ft (2.4 m) horizontal reference line on the vertical wall or screen at this height. Note: To see a clearer light pattern for adjusting, you may want to block the light from one headlamp when adjusting the other. 3. Switch on the low beam headlamps to illuminate the wall or screen and open the hood.
E142466
4. There is a distinct cut-off (change from light to dark) in the left portion of the beam pattern. The top edge of this cut-off should be positioned 2 in (5 cm) below the horizontal reference line.
E142467
5. Locate the vertical adjuster on each headlamp. Using a Phillips #2 screwdriver, turn the adjuster either clockwise or counterclockwise in order to aim the headlamp.
6. Close the hood and switch off the lamps.
Horizontal Aim Adjustment
Horizontal aim is not required for this vehicle and is non-adjustable.
CHANGING A BULB
Lamp Assembly Condensation
Exterior lamps are vented to accommodate normal changes in pressure. Condensation can be a natural by-product of this design. When moist air enters the lamp assembly through the vents, there is a possibility that condensation can occur when the temperature is cold. When normal condensation occurs, a thin film of mist can form on the interior of the lens. The thin mist eventually clears and exits through the vents during normal operation. Clearing time may take as long as 48 hours under dry weather conditions.
258
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
Examples of acceptable condensation are:
· Presence of thin mist (no streaks, drip marks or droplets).
· Fine mist covers less than 50% of the lens.
Examples of unacceptable moisture (usually caused by a lamp water leak) are:
· Water puddle inside the lamp.
· Large water droplets, drip marks or streaks present on the interior of the lens.
Take your vehicle to a dealer for service if any of the above conditions of unacceptable moisture are present.
Replacing Headlamp Bulbs
WARNING
Make sure the bulbs have cooled down before removing them. Failure to follow this warning could result in serious personal injury.
Note: Handle a halogen headlamp bulb carefully and keep out of children's reach. Grasp the bulb by only its plastic base and do not touch the glass. The oil from your hand could cause the bulb to break the next time the headlamps are operated.
Note: If the bulb is accidentally touched, it should be cleaned with rubbing alcohol before being used.
Headlamp:
AB
C
E142469
A Side marker B Low beam headlamp C High beam headlamp
(Halogen)/Cornering lamp (HID) High beam headlamp (Halogen):
24
E142470
1. Remove service cap. 2. Disconnect the electrical connector. 3. Remove bulb from the headlamp
assembly by turning it counterclockwise, then pull it straight out. Low beam headlamp (Halogen):
259
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
24
Maintenance
Replacing Side Marker Bulbs
E142471
1. Reposition the coolant reservoir tank by lifting and rotating inward to provide more hand clearance. (Right side only)
2. Remove service cap.
3. Disconnect the electrical connector.
4. Remove bulb from the headlamp assembly by turning it counterclockwise, then pull it straight out.
Install the new bulbs in reverse order from the steps above. Be sure that the spring clip is not damaged or detached from the headlamp assembly during the replacement procedure.
Cornering Lamp (HID Headlamps)
1. Remove service cap.
2. Disconnect electrical connector.
3. Release spring clip and rotate away from the assembly.
4. Pull bulb straight out toward the rear of the vehicle.
Replacing HID Headlamp Bulbs (If
Equipped)
The low beam headlamps on your vehicle use a high intensity discharge source. These lamps operate at a high voltage. When the bulb is burned out, the bulb and starter capsule assembly must be replaced by your authorized dealer.
E142472
1. Remove the bulb socket from the headlamp assembly by turning it counterclockwise.
2. Remove the bulb by gently pulling the bulb straight out of the socket.
Install the new bulb in reverse order. Replacing Fog, Park and Turn Signal Bulbs
B
A
E245248
A Fog Lamp B Park/Turn Lamp 1. Remove fog lamp bezel by prying away from the bumper fascia.
260
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
Replacing Turn Signal Bulbs
E255385
2. Remove the screws and remove the fog lamp assembly.
E255368
A Turn lamp B Side marker
2
E245249
3. Remove the bulb holder from the lamp assembly by turning it counterclockwise.
4. Remove the bulb from the bulb holder
by pulling it straight out.
Install the new bulbs in reverse order from
3
the steps above.
E142473
1. Make sure the headlamp control is in the off position and open the liftgate.
2. Remove the two bolt covers using a standard flat tip screwdriver.
3. Remove the two bolts from the lamp assembly.
261
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
4. Gently pull the lamp assembly away from the vehicle.
5. Disconnect the electrical connector. 6. Remove the turn signal bulb by turning
the lower bulb socket counterclockwise. Gently pull the bulb straight out of the socket.
Install the new bulb in reverse order.
Replacing Reverse Lamp Assembly
For bulb replacement, see your authorized dealer.
Replacing License Plate Lamp Bulb
2
3
1
E72789
1. Carefully release the spring clip.
2. Remove the lamp.
3. Remove the bulb.
Reverse steps to reinstall bulb.
Replacing High-Mount Brake Lamp Bulb
Your vehicle is equipped with an LED center high-mount stop lamp located in the spoiler. It is designed to last the life of the vehicle. If replacement is required, see your authorized dealer.
BULB SPECIFICATION CHART
Replacement bulbs are specified in the chart below. Headlamp bulbs must be marked with an authorized "D.O.T." for North America to ensure lamp performance, light brightness and pattern and safe visibility. The correct bulbs will not damage the lamp assembly or void the lamp assembly warranty and will provide quality bulb burn time.
Function Headlamps high beam (Halogen Reflector) Headlamps high beam (Halogen Protector) * Headlamps cornering (HID) Headlamp low beam (Halogen Reflector) Headlamp low beam (Halogen Protector) * Headlamp low beam (HID) Sidemarker - front Turn lamp - front (with fog lamp) Turn lamp - front (without fog lamp) Fog lamps
Trade number 9005LL H9 H1 H11LL 9005HL+ D3S 168 7444NA W21/5W H11
262
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
Function
Trade number
Tail/brake lamp
LED
Turn lamp - rear
WY21W
Backup lamp
921
License plate lamp
W5W
Rear side marker
W5W
* High-mount brake lamp
LED
* Interior lamps
LED
* To replace these lamps - see your authorized dealer. To replace all instrument panel lights - see your authorized dealer
263
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
CHANGING THE ENGINE AIR FILTER
WARNING To reduce the risk of vehicle damage and personal burn injuries, do not start your engine with the air cleaner removed and do not remove it while the engine is running.
When changing the air filter element, use only the air filter element listed. See Capacities and Specifications (page 300). For EcoBoost equipped vehicles: When servicing the air cleaner, it is important that no foreign material enter the air induction system. The engine and turbocharger are susceptible to damage from even small particles. Change the air filter element at the proper interval. See Scheduled Maintenance (page 455). Note: Failure to use the correct air filter element may result in severe engine damage. The customer warranty may be void for any damage to the engine if the correct air filter element is not used. EcoBoost Engines
E171370
1. Loosen the four fasteners and remove the air cleaner assembly lid.
2. Remove the air filter element from the air filter housing.
3. Wipe any dirt or debris from the air cleaner assembly to make sure no dirt gets in the engine and to make sure you have a good seal.
E170433
4. Install the new air filter element. Slide the open end of the air filter element in first, below the tab. Then push the closed end of the air filter into the bottom of the tray. The closed end should fit inside the groove in the tray. The tab of the closed end of the air filter should be oriented down and fit between the forks on the tray as shown at the arrow above.
264
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Maintenance
Note: Make sure you align the tab in the air filter element with the fork in the air cleaner assembly tray. 5. Install the air cleaner assembly lid and
tighten the four fasteners. Duratec Engines
E142711
1. Detach the 2 clips that secure the air filter cover to the housing.
2. Carefully remove the air filter cover from the housing. Do not detach any connections or tubes from the cover.
3. Remove the air cleaner from the housing.
4. Wipe any dirt or debris from the air filter housing and cover to make sure that no dirt gets into the engine.
5. Load the air filter into the housing. 6. Replace the air filter cover and secure
the clips.
265
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Vehicle Care
GENERAL INFORMATION
Your dealer has many quality products available to clean your vehicle and protect its finishes.
CLEANING PRODUCTS
Materials For best results, use the following products or products of equivalent quality:
Name
Motorcraft® Bug and Tar Remover, ZC-42 (U.S. & Canada) Motorcraft® Custom Bright Metal Cleaner, ZC-15 (U.S. & Canada) Motorcraft® Detail Wash, ZC-3-A (U.S. & Canada) Motorcraft® Engine Shampoo and Degreaser, ZC-20 (U.S.) Motorcraft® Engine Shampoo, CXC-66-A (Canada) Motorcraft® Premium Leather and Vinyl Cleaner, ZC-56 (U.S. & Canada) Motorcraft® Multi-Purpose Cleaner, CXC-101 (Canada) Motorcraft® Premium Windshield Wash Concentrate with Bitterant, ZC-32-B2 (U.S.) Motorcraft® Premium Quality Windshield Washer Fluid, CXC-37A/B/D/F (Canada) Motorcraft® Professional Strength Carpet & Upholstery Cleaner, ZC-54 (U.S. & Canada) Motorcraft® Premium Glass Cleaner, CXC-100 (Canada) Motorcraft® Spot and Stain Remover, ZC-14 (U.S.) Motorcraft® Ultra-Clear Spray Glass Cleaner, ZC-23 (U.S.) Motorcraft® Wheel and Tire Cleaner, ZC-37-A (U.S. & Canada)
Specification ESR-M5B194-B ESR-M14P4-A ESR-M14P3-A WSS-M99P43-B
WSS-M14P19-A WSS-M14P19-A
ESR-M14P5-A ESR-M14P5-A
CLEANING THE EXTERIOR
Wash your vehicle regularly with cool or lukewarm water and a neutral pH shampoo, we recommend Motorcraft Detail Wash.
· Never use strong household detergents or soap, for example dish washing or laundry liquid. These products can discolor and spot painted surfaces.
· Never wash your vehicle when it is hot to the touch, or during strong or direct sunlight.
266
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Vehicle Care
· Dry your vehicle with a chamois or soft terry cloth towel to eliminate water spotting.
· Immediately remove fuel spillages, bird droppings, insect deposits and road tar. These may cause damage to your vehicle's paintwork or trim over time. We recommend Motorcraft Bug and Tar Remover.
· Remove any exterior accessories, for example antennas, before entering a car wash.
· When filling with AdBlue®, remove any residue on painted surfaces immediately.
Note: Suntan lotions and insect repellents can damage painted surfaces. If these substances come in contact with your vehicle, wash the affected area as soon as possible.
Cleaning the Headlamps
Note: Do not scrape the headlamp lenses or use abrasives, alcoholic solvents or chemical solvents to clean them.
Note: Do not wipe the headlamps when they are dry.
Exterior Chrome Parts
· Apply a high quality-cleaning product to bumpers and other chrome parts. Follow the manufacturer's instructions. We recommend Motorcraft Custom Bright Metal Cleaner.
· Do not apply the cleaning product to hot surfaces. Do not leave the cleaning product on chrome surfaces longer than the time recommended.
· Using non-recommended cleaners can result in severe and permanent cosmetic damage.
Note: Never use abrasive materials, for example steel wool or plastic pads as they can scratch the chrome surface.
Note: Do not use chrome cleaner, metal cleaner or polish on wheels or wheel covers.
Exterior Plastic Parts
For routine cleaning we recommend Motorcraft Detail Wash. If tar or grease spots are present, we recommend Motorcraft Bug and Tar Remover.
Stripes or Graphics (If Equipped)
Hand washing your vehicle is preferred however, pressure washing may be used under the following conditions:
· Do not use water pressure higher than 2,000 psi (14,000 kPa).
· Do not use water hotter than 179°F (82°C).
· Use a spray with a 40° wide spray angle pattern.
· Keep the nozzle at a 12 in (305 mm) distance and 90° angle to your vehicle's surface.
Note: Holding the pressure washer nozzle at an angle to the vehicle's surface may damage graphics and cause the edges to peel away from the vehicle's surface.
Underbody
Regularly clean the underside of your vehicle using water. Keep body and door drain holes free of debris or foreign material.
Under Hood
For removing black rubber marks from under the hood we recommend Motorcraft Wheel and Tire Cleaner or Motorcraft Bug and Tar Remover.
267
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Vehicle Care
WAXING
Regular waxing is necessary to protect your car's paint from the elements. We recommend that you wash and wax the painted surface once or twice a year.
When washing and waxing, park your vehicle in a shaded area out of direct sunlight. Always wash your vehicle before applying wax.
· Use a quality wax that does not contain abrasives.
· Follow the manufacturer's instructions to apply and remove the wax.
· Apply a small amount of wax in a back-and-forth motion, not in circles.
· Do not allow wax to come in contact with any non-body (low-gloss black) colored trim. The wax will discolor or stain the parts over time. · Roof racks. · Bumpers. · Grained door handles. · Side moldings. · Mirror housings. · Windshield cowl area.
· Do not apply wax to glass areas. · After waxing, your car's paint should
feel smooth, and be free of streaks and smudges.
CLEANING THE ENGINE
Engines are more efficient when they are clean because grease and dirt buildup keep the engine warmer than normal.
When washing:
· Take care when using a power washer to clean the engine. The high-pressure fluid could penetrate the sealed parts and cause damage.
· Do not spray a hot engine with cold water to avoid cracking the engine block or other engine components.
· Spray Motorcraft Engine Shampoo and Degreaser on all parts that require cleaning and pressure rinse clean. In Canada, use Motorcraft Engine Shampoo.
· Never wash or rinse the engine while it is hot or running; water in the running engine may cause internal damage.
· Never wash or rinse any ignition coil, spark plug wire or spark plug well, or the area in and around these locations.
· Cover the battery, power distribution box, and air filter assembly to prevent water damage when cleaning the engine.
CLEANING THE WINDOWS AND WIPER BLADES
Car wash chemicals and environmental fallout can result in windshield and wiper blade contamination. Dirty windshield and wipers will result in poor windshield wiper operation. Keep the windshield and wiper blades clean to maintain windshield wiper performance.
268
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Vehicle Care
To clean the windshield and wiper blades:
· Clean the windshield with a non-abrasive glass cleaner. When cleaning the interior of the windshield, avoid getting any glass cleaner on the instrument panel or door panels. Wipe any glass cleaner off these surfaces immediately.
· For windshields contaminated with tree sap, chemicals, wax or bugs, clean the entire windshield using steel wool (no greater than 0000 grade) in a circular motion and rinse with water.
· Clean the wiper blades with isopropyl rubbing alcohol or windshield washer concentrate.
Note: Do not use razor blades or other sharp objects to clean or remove decals from the inside of the heated rear window. The vehicle warranty does not cover damage caused to the heated rear window grid lines.
CLEANING THE INTERIOR
WARNINGS
Do not use cleaning solvents, bleach or dye on the vehicle's seatbelts, as these actions may weaken the belt webbing.
On vehicles equipped with seat-mounted airbags, do not use chemical solvents or strong detergents. Such products could contaminate the side airbag system and affect performance of the side airbag in a crash.
For fabric, carpets, cloth seats and seats equipped with side airbags:
· Remove dust and loose dirt with a vacuum cleaner.
· Remove light stains and soil with Motorcraft Professional Strength Carpet & Upholstery Cleaner.
· If grease or tar is present on the material, spot-clean the area first with Motorcraft Spot and Stain Remover. In Canada, use Motorcraft Multi-Purpose Cleaner.
· If a ring forms on the fabric after spot cleaning, clean the entire area immediately (but do not oversaturate) or the ring will set.
· Do not use household cleaning products or glass cleaners, which can stain and discolor the fabric and affect the flame retardant abilities of the seat materials.
CLEANING THE INSTRUMENT PANEL AND INSTRUMENT CLUSTER LENS
WARNING
Do not use chemical solvents or strong detergents when cleaning the steering wheel or instrument panel to avoid contamination of the airbag system.
Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces. See Cleaning Leather Seats (page 270).
Clean the instrument panel and cluster lens with a clean, damp and soft cloth, then use a clean, dry and soft cloth to dry these areas.
269
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Vehicle Care
· Avoid cleaners or polishes that increase the gloss of the upper portion of the instrument panel. The dull finish in this area helps protect you from undesirable windshield reflection.
· Do not use any household cleaning products or glass cleaners as these may damage the finish of the instrument panel, interior trim and cluster lens.
· Wash or wipe your hands clean if you have been in contact with certain products such as insect repellent and suntan lotion to avoid possible damage to the interior painted surfaces.
· Do not allow air fresheners and hand sanitizers to spill onto interior surfaces. If a spill occurs, wipe off immediately. Your warranty may not cover these damages.
If a staining liquid like coffee or juice has been spilled on the instrument panel or on interior trim surfaces:
1. Wipe up spilled liquid using a clean, soft cloth as quickly as possible.
2. Use Motorcraft Premium Leather and Vinyl Cleaner or a commercially available leather cleaning product for automotive interiors. Test any cleaner or stain remover on an inconspicuous area.
3. Alternatively, wipe the surface with a clean, soft cloth and a mild soap and water solution. Dry the area with a clean, soft cloth.
4. If necessary, apply more soap and water solution or cleaning product to a clean, soft cloth and press it onto the soiled area. Allow this to set at room temperature for 30 minutes.
5. Remove the soaked cloth, then with a clean, damp cloth, use a rubbing motion for 60 seconds on the soiled area.
6. Dry the area with a clean, soft cloth.
CLEANING LEATHER SEATS (If
Equipped)
Note: Follow the same procedure as cleaning leather seats for cleaning leather instrument panels and leather interior trim surfaces.
For routine cleaning, wipe the surface with a soft, damp cloth and a mild soap and water solution. Dry the area with a clean, soft cloth.
For cleaning and removing stains such as dye transfer, use Motorcraft Premium Leather and Vinyl Cleaner or a commercially available leather cleaning product for automotive interiors.
Note: Test any cleaner or stain remover on an inconspicuous area.
You should: · Remove dust and loose dirt with a
vacuum cleaner. · Clean and treat spills and stains as
soon as possible.
Do not use the following products as these may damage the leather: · Oil and petroleum or silicone-based
leather conditioners. · Household cleaners. · Alcohol solutions. · Solvents or cleaners intended
specifically for rubber, vinyl and plastics.
270
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Vehicle Care
REPAIRING MINOR PAINT DAMAGE
Authorized dealers have touch-up paint to match your vehicle's color. Your vehicle color code is printed on a sticker on the front, left-hand side door jamb. Take your color code to your authorized dealer to make sure you get the correct color.
Before repairing minor paint damage, use a cleaner such as Motorcraft Bug and Tar Remover to remove particles such as bird droppings, tree sap, insect deposits, tar spots, road salt and industrial fallout.
Always read the instructions before using cleaning products.
CLEANING THE WHEELS (If
Equipped)
1. Regularly clean them with a wheel cleaner. We recommend that you use Ford approved wheel cleaner if available.
2. Remove dirt and brake dust with a sponge.
3. Remove tar and grease with a bug and tar remover. We recommend that you use Ford approved bug and tar remover if available.
4. Thoroughly rinse the wheels with water after cleaning.
If you intend on parking your vehicle for an extended period after cleaning the wheels with a wheel cleaner, drive your vehicle for a few minutes before doing so. This reduces the risk of corrosion of the brake discs, brake pads and linings.
Do not clean the wheels when they are hot.
Note: Some car washes could damage wheel rims and covers.
Note: Using non-recommended cleaners, harsh cleaning products, chrome wheel cleaners or abrasive materials could damage wheel rims and covers.
VEHICLE STORAGE
If you plan on storing your vehicle for 30 days or more, read the following maintenance recommendations to make sure your vehicle stays in good operating condition.
We engineer and test all motor vehicles and their components for reliable, regular driving. Under various conditions, long-term storage may lead to degraded engine performance or failure unless you use specific precautions to preserve engine components.
General
· Store all vehicles in a dry, ventilated place.
· Protect from sunlight, if possible.
· If vehicles are stored outside, they require regular maintenance to protect against rust and damage.
Body
· Wash your vehicle thoroughly to remove dirt, grease, oil, tar or mud from exterior surfaces, rear-wheel housing and the underside of front fenders.
· Periodically wash your vehicle if it is stored in exposed locations.
· Touch-up exposed or primed metal to prevent rust.
· Cover chrome and stainless steel parts with a thick coat of auto wax to prevent discoloration. Re-wax as necessary when you wash your vehicle.
· Lubricate all hood, door and luggage compartment hinges and latches with a light grade oil.
271
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Vehicle Care
· Cover interior trim to prevent fading.
· Keep all rubber parts free from oil and solvents.
Engine
· Change the engine oil and filter prior to storage because used engine oil contains contaminates which may cause engine damage.
· Start the engine every 15 days for a minimum of 15 minutes. Run at fast idle with the climate controls set to defrost until the engine reaches normal operating temperature.
· With your foot on the brake, shift through all the gears while the engine is running.
· We recommend that you change the engine oil before you use your vehicle again.
Fuel system
· Fill the fuel tank with high-quality fuel until the first automatic shutoff of the fuel pump nozzle.
Cooling system
· Protect against freezing temperatures.
· When removing your vehicle from storage, check coolant fluid level. Confirm that there are no cooling system leaks and that fluid is at the recommended level.
Battery
· Check and recharge as necessary. Keep connections clean.
· If storing your vehicle for more than 30 days without recharging the battery, we recommend that you disconnect the battery cables to maintain battery charge for quick starting.
Note: It is necessary to reset memory features if battery cables are disconnected.
Brakes
· Make sure the brakes and parking brake release fully.
Tires
· Maintain recommended air pressure.
Miscellaneous
· Make sure all linkages, cables, levers and pins under your vehicle are covered with grease to prevent rust.
· Move vehicles at least 25 ft (7.5 m) every 15 days to lubricate working parts and prevent corrosion.
Removing Vehicle From Storage
When your vehicle is ready to come out of storage, do the following: · Wash your vehicle to remove any dirt
or grease film build-up on window surfaces. · Check windshield wipers for any deterioration. · Check under the hood for any foreign material that may have collected during storage such as mice or squirrel nests. · Check the exhaust for any foreign material that may have collected during storage. · Check tire pressures and set tire inflation per the Tire Label. · Check brake pedal operation. Drive your vehicle 15 ft (4.5 m) back and forth to remove rust build-up.
272
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Vehicle Care
· Check fluid levels (including coolant, oil and gas) to make sure there are no leaks, and fluids are at recommended levels.
· If you remove the battery, clean the battery cable ends and check for damage.
Contact an authorized dealer if you have any concerns or issues.
273
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
GENERAL INFORMATION
Use only approved wheel and tire sizes, using other sizes could damage your vehicle. If you change the diameter of the tires from that fitted at the factory, the speedometer may not display the correct speed. Take your vehicle to an authorized dealer to have the system reprogrammed. If you intend to change the size of the wheels from that fitted by the manufacturer, you can check the suitability with an authorized dealer.
Additional information related to the functionality and maintenance of your tires can be found later in this chapter. See Tire Care (page 276).
The Ford recommended tire inflation pressures can be found on the Tire Label, which is located on the B-pillar or the edge of the driver's door. This information can also be found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door last post; next to the driver's seating position).
Ford strongly recommends maintaining these tire pressures at all times. Failure to follow the tire pressure recommendations can cause uneven treadwear patterns, reduced fuel economy, and adversely affect the way your vehicle handles.
Note: Check and set the tire pressure at the ambient temperature in which you are intending to drive your vehicle and when the tires are cold.
Note: Check your tire pressures at least once per month.
Set the pressure for your spare tire to the highest value given for your vehicle and tire size combination (if equipped).
Notice to utility vehicle and truck owners
WARNINGS Utility vehicles have a significantly higher rollover rate than other types of vehicles. Vehicles with a higher center of gravity (utility and four-wheel drive vehicles) handle differently than vehicles with a lower center of gravity (passenger cars). Avoid sharp turns, excessive speed and abrupt steering in these vehicles. Failure to drive cautiously increases the risk of losing control of your vehicle, vehicle rollover, personal injury and death. In a rollover crash, an unbelted person is significantly more likely to die than a person wearing a seatbelt. Do not become overconfident in the ability of four-wheel drive vehicles. Although a four-wheel drive vehicle may accelerate better than a two-wheel drive vehicle in low traction situations, it won't stop any faster than two-wheel drive vehicles. Always drive at a safe speed.
E145298
274
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
Utility vehicles and trucks handle differently than passenger cars in the various driving conditions that are encountered on streets, highways and off-road. Utility vehicles and trucks are not designed for cornering at speeds as high as passenger cars any more than low-slung sports cars are designed to perform satisfactorily under off-road conditions.
Study your owner's manual and any supplements for specific information about equipment features, instructions for safe driving and additional precautions to reduce the risk of an accident or serious injury.
Four-wheel drive system (If Equipped)
WARNING
Do not become overconfident in the ability of four-wheel drive vehicles. Although a four-wheel drive vehicle may accelerate better than a two-wheel drive vehicle in low traction situations, it won't stop any faster than two-wheel drive vehicles. Always drive at a safe speed.
A vehicle equipped with four-wheel drive, when selected, has the ability to use all four wheels to power itself. This increases traction which may enable you to safely drive over terrain and road conditions that a conventional two-wheel drive vehicle cannot.
Power is supplied to all four wheels through a transfer case or power transfer unit. Four-wheel drive vehicles allow you to select different modes as necessary. For information on transfer case operation and shifting procedures, See Four-Wheel Drive (page 154). For information on transfer case maintenance, See Maintenance (page 241). You should become thoroughly familiar with this information before you operate your vehicle.
On some four-wheel drive vehicles, the initial shift from two-wheel to four-wheel drive when the vehicle is moving can cause a momentary clunk and ratcheting sound. These sounds are normal and are not cause for concern. In four-wheel drive vehicles, the size of the spare tire relative to the remaining tires can have an effect on the 4x4 system. If there is a significant difference between the size of a spare and the remaining tires, four-wheel drive functionality may be limited. See Principle of Operation (page 154). How your vehicle differs from other vehicles Sport utility vehicles and trucks can differ from some other vehicles in a few noticeable ways. Your vehicle may be:
E145299
275
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
· Higher - to allow higher load carrying capacity and to allow it to travel over rough terrain without getting hung up or damaging underbody components.
· Shorter - to give it the capability to approach inclines and drive over the crest of a hill without getting hung up or damaging underbody components. All other things held equal, a shorter wheelbase may make your vehicle quicker to respond to steering inputs than a vehicle with a longer wheelbase.
· Narrower - to provide greater maneuverability in tight spaces, particularly in off-road use.
As a result of the above dimensional differences, Sport utility vehicles and trucks often have a higher center of gravity and a greater difference in center of gravity between the loaded and unloaded condition. These differences that make your vehicle so versatile also make it handle differently than an ordinary passenger car.
TIRE CARE
Information About Uniform Tire Quality Grading
E168583
E142542
Tire Quality Grades apply to new pneumatic passenger car tires. The Quality grades can be found where applicable on the tire sidewall between tread shoulder and maximum section width. For example: Treadwear 200 Traction AA Temperature A.
These Tire Quality Grades are determined by standards that the United States Department of Transportation has set.
276
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
Tire Quality Grades apply to new pneumatic passenger car tires. They do not apply to deep tread, winter-type snow tires, space-saver or temporary use spare tires, light truck or LT type tires, tires with nominal rim diameters of 10 to 12 inches or limited production tires as defined in Title 49 Code of Federal Regulations Part 575.104 (c)(2).
U.S. Department of Transportation Tire quality grades: The U.S. Department of Transportation requires Ford Motor Company to give you the following information about tire grades exactly as the government has written it.
Treadwear
The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear 1½ times as well on the government course as a tire graded 100. The relative performance of tires depends upon the actual conditions of their use, however, and may depart significantly from the norm due to variations in driving habits, service practices, and differences in road characteristics and climate.
Traction AA A B C
WARNING
The traction grade assigned to this tire is based on straight-ahead braking traction tests, and does not include acceleration, cornering, hydroplaning or peak traction characteristics.
The traction grades, from highest to lowest are AA, A, B, and C. The grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
Temperature A B C
WARNING
The temperature grade for this tire is established for a tire that is properly inflated and not overloaded. Excessive speed, underinflation, or excessive loading, either separately or in combination, can cause heat buildup and possible tire failure.
The temperature grades are A (the highest), B and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory
277
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
test wheel. Sustained high temperature can cause the material of the tire to degenerate and reduce tire life, and excessive temperature can lead to sudden tire failure. The grade C corresponds to a level of performance which all passenger car tires must meet under the Federal Motor Vehicle Safety Standard No. 139. Grades B and A represent higher levels of performance on the laboratory test wheel than the minimum required by law.
Glossary of Tire Terminology
*Tire label: A label showing the original equipment tire sizes, recommended inflation pressure and the maximum weight the vehicle can carry.
*Tire Identification Number (TIN): A number on the sidewall of each tire providing information about the tire brand and manufacturing plant, tire size and date of manufacture. Also referred to as DOT code.
*Inflation pressure: A measure of the amount of air in a tire.
*Standard load: A class of P-metric or Metric tires designed to carry a maximum load at set pressure. For example: For P-metric tires 35 psi (2.4 bar) and for Metric tires 36 psi (2.5 bar). Increasing the inflation pressure beyond this pressure will not increase the tire's load carrying capability.
*Extra load: A class of P-metric or Metric tires designed to carry a heavier maximum load at 42 psi (2.9 bar). Increasing the inflation pressure beyond this pressure will not increase the tire's load carrying capability.
*kPa: Kilopascal, a metric unit of air pressure.
*PSI: Pounds per square inch, a standard unit of air pressure.
*Cold tire pressure: The tire pressure when the vehicle has been stationary and out of direct sunlight for an hour or more and prior to the vehicle being driven for 1 mi (1.6 km).
*Recommended inflation pressure: The cold inflation pressure found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position), or Tire Label located on the B-Pillar or the edge of the driver door.
278
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
* B-pillar: The structural member at the side of the vehicle behind the front door.
*Bead area of the tire: Area of the tire next to the rim.
* Sidewall of the tire: Area between the bead area and the tread.
*Tread area of the tire: Area of the perimeter of the tire that contacts the road when mounted on the vehicle.
*Rim: The metal support (wheel) for a tire or a tire and tube assembly upon which the tire beads are seated.
Information Contained on the Tire Sidewall
Both United States and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.S. DOT Tire Identification Number for safety standard certification and in case of a recall.
Information on P Type Tires
B A
CD E F G H
I
M
J
L K
E142543
P215/65R15 95H is an example of a tire size, load index and speed rating. The definitions of these items are listed below. (Note that the tire size, load index and speed rating for your vehicle may be different from this example.)
A. P: Indicates a tire, designated by the Tire and Rim Association, that may be used for service on cars, sport utility vehicles, minivans and light trucks. Note: If your tire size does not begin with a letter this may mean it is designated by either the European Tire and Rim Technical Organization or the Japan Tire Manufacturing Association.
279
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
B. 215: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge. In general, the larger the number, the wider the tire.
C. 65: Indicates the aspect ratio which gives the tire's ratio of height to width.
D. R: Indicates a radial type tire.
E. 15: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter.
F. 95: Indicates the tire's load index. It is an index that relates to how much weight a tire can carry. You may find this information in your owner's manual. If not, contact a local tire dealer.
Note: You may not find this information on all tires because it is not required by federal law.
G. H: Indicates the tire's speed rating. The speed rating denotes the speed at which a tire is designed to be driven for extended periods of time under a standard condition of load and inflation pressure. The tires on your vehicle may operate at different conditions for load and inflation pressure. These speed ratings may need to be adjusted for the difference in conditions. The ratings range from 81 mph (130 km/h) to 186 mph (299 km/h). These ratings are listed in the following chart.
Note: You may not find this information on all tires because it is not required by federal law.
Letter rating
Speed rating
M
81 mph (130 km/h)
N
87 mph (140 km/h)
Q
99 mph (159 km/h)
R
106 mph (171 km/h)
S
112 mph (180 km/h)
T
118 mph (190 km/h)
U
124 mph (200 km/h)
H
130 mph (210 km/h)
V
149 mph (240 km/h)
W
168 mph (270 km/h)
Y
186 mph (299 km/h)
Note: For tires with a maximum speed capability over 149 mph (240 km/h), tire manufacturers sometimes use the letters ZR. For those with a maximum speed capability over 186 mph (299 km/h), tire manufacturers always use the letters ZR.
H. U.S. DOT Tire Identification Number (TIN): This begins with the letters DOT and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code designating where it was manufactured, the next two are
280
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
the tire size code and the last four numbers represent the week and year the tire was built. For example, the numbers 317 mean the 31st week of 1997. After 2000, the numbers go to four digits. For example, 2501 means the 25th week of 2001. The numbers in between are identification codes used for traceability. This information is used to contact customers if a tire defect requires a recall.
I. M+S or M/S: Mud and Snow, or
AT: All Terrain, or
AS: All Season.
J. Tire Ply Composition and Material Used: Indicates the number of plies or the number of layers of rubber-coated fabric in the tire tread and sidewall. Tire manufacturers also must indicate the ply materials in the tire and the sidewall, which include steel, nylon, polyester, and others.
K. Maximum Load: Indicates the maximum load in kilograms and pounds that can be carried by the tire. See the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position), for the correct tire pressure for your vehicle.
L. Treadwear, Traction and Temperature Grades:
*Treadwear The treadwear grade is a comparative rating based on the wear rate of the tire when tested under controlled conditions on a specified government test course. For example, a tire graded 150 would wear one and one-half times as well on the government course as a tire graded 100.
*Traction: The traction grades, from highest to lowest are AA, A, B, and C. The grades represent the tire's ability to stop on wet pavement as measured under controlled conditions on specified government test surfaces of asphalt and concrete. A tire marked C may have poor traction performance.
*Temperature: The temperature grades are A (the highest), B and C, representing the tire's resistance to the generation of heat and its ability to dissipate heat when tested under controlled conditions on a specified indoor laboratory test wheel.
M. Maximum Inflation Pressure: Indicates the tire manufacturers' maximum permissible pressure or the pressure at which the maximum load can be carried by the tire. This pressure is normally higher than the vehicle manufacturer's recommended cold inflation pressure which can be found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge
281
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
that meets the door-latch post, next to the driver's seating position), or Tire Label which is located on the B-Pillar or the edge of the driver's door. The cold inflation pressure should never be set lower than the recommended pressure on the vehicle label.
The tire suppliers may have additional markings, notes or warnings such as standard load or radial tubeless.
Additional Information Contained on the Tire Sidewall for LT Type Tires
Note: Tire Quality Grades do not apply to this type of tire.
B C
A
A. LT: Indicates a tire, designated by the Tire and Rim Association, that is intended for service on light trucks.
B. Load Range and Load Inflation Limits: Indicates the tire's load-carrying capabilities and its inflation limits.
C. Maximum Load Dual lb (kg) at psi (kPa) cold: Indicates the maximum load and tire pressure when the tire is used as a dual, defined as four tires on the rear axle (a total of six or more tires on the vehicle).
D. Maximum Load Single lb (kg) at psi (kPa) cold: Indicates the maximum load and tire pressure when the tire is used as a single, defined as two tires (total) on the rear axle.
Information on T Type Tires
T145/80D16 is an example of a tire size.
Note: The temporary tire size for your vehicle may be different from this example. Tire Quality Grades do not apply to this type of tire.
D
B
E142544
LT type tires have some additional information beyond those of P type tires; these differences are described below.
282
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
BCD
A
E
E142545
T type tires have some additional information beyond those of P type tires; these differences are described below:
A. T: Indicates a type of tire, designated by the Tire and Rim Association, that is intended for temporary service on cars, sport utility vehicles, minivans and light trucks.
B. 145: Indicates the nominal width of the tire in millimeters from sidewall edge to sidewall edge. In general, the larger the number, the wider the tire.
C. 80: Indicates the aspect ratio which gives the tire's ratio of height to width. Numbers of 70 or lower indicate a short sidewall.
D. D: Indicates a diagonal type tire.
R: Indicates a radial type tire.
E. 16: Indicates the wheel or rim diameter in inches. If you change your wheel size, you will have to purchase new tires to match the new wheel diameter.
Recommended Tire Pressures and Inflating Your Tires
Safe operation of your vehicle requires that your tires are properly inflated. Remember that a tire can lose up to half of its air pressure without appearing flat. Every day before you drive, check your tires. If one looks lower than the others, use a tire gauge to check the pressure of all tires and adjust if required.
At least once a month and before long trips, inspect each tire and check the tire pressure with a tire gauge (including spare, if equipped). Inflate all tires to the inflation pressure recommended by Ford Motor Company.
283
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
WARNING
Under-inflation is the most common cause of tire failures and may result in severe tire cracking, tread separation or blowout, with unexpected loss of vehicle control and increased risk of injury. Under-inflation increases sidewall flexing and rolling resistance, resulting in heat buildup and internal damage to the tire. It also may result in unnecessary tire stress, irregular wear, loss of vehicle control and accidents. A tire can lose up to half of its air pressure and not appear to be flat!
You are strongly urged to buy a reliable tire pressure gauge, as automatic service station gauges may be inaccurate. Ford recommends the use of a digital or dial-type tire pressure gauge rather than a stick-type tire pressure gauge. Use the recommended cold inflation pressure for optimum tire performance and wear. Under-inflation or over-inflation may cause uneven treadwear patterns.
Always inflate your tires to the Ford recommended inflation pressure even if it is less than the maximum inflation pressure information found on the tire. You will find a Tire Label containing the Ford recommended tire inflation pressure by the tire size and other important information located on the B-Pillar or the edge of the driver's door.
The Ford recommended tire inflation pressure is also found on the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch on the B-pillar, or on the edge of the driver's door.
Failure to follow the tire pressure recommendations can cause uneven treadwear patterns and adversely affect the way your vehicle handles.
Inspecting Your Tires and Wheel Valve Stems
Periodically inspect the tire treads for uneven or excessive wear and remove objects such as stones, nails or glass that may be wedged in the tread grooves. Check the tire and valve stems for holes, cracks, or cuts that may permit air leakage and repair or replace the tire and replace the valve stem. Inspect the tire sidewalls for cracking, cuts, bruises and other signs of damage or excessive wear. If internal damage to the tire
284
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
is suspected, have the tire demounted and inspected in case it needs to be repaired or replaced. For your safety, tires that are damaged or show signs of excessive wear should not be used because they are more likely to blow out or fail.
Improper or inadequate vehicle maintenance can cause tires to wear abnormally. Inspect all your tires, including the spare, frequently, and replace them if one or more of the following conditions exist:
Tire Wear
When the tire tread wears down to the same height as these wear bars, the tire is worn out and must be replaced.
Damage
Periodically inspect the tire treads and sidewalls for damage (such as bulges in the tread or sidewalls, cracks in the tread groove and separation in the tread or sidewall). If damage is observed or suspected, have the tire inspected by a tire professional. Tires can be damaged during off-road use, so inspection after off-road use is also recommended.
E142546
When the tread is worn down to one sixteenth of an inch (2 mm), tires must be replaced to help prevent your vehicle from skidding and hydroplaning. Built-in treadwear indicators, or wear bars, which look like narrow strips of smooth rubber across the tread will appear on the tire when the tread is worn down to one sixteenth of an inch (2 mm).
285
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
Age
WARNING
Tires degrade over time depending on many factors such as weather, storage conditions, and conditions of use (load, speed, inflation pressure) the tires experience throughout their lives.
In general, tires should be replaced after six years regardless of tread wear. However, heat caused by hot climates or frequent high loading conditions can accelerate the aging process and may require tires to be replaced more frequently.
You should replace your spare tire when you replace the road tires or after six years due to aging even if it has not been used.
U.S. DOT Tire Identification Number
Both United States and Canada Federal regulations require tire manufacturers to place standardized information on the sidewall of all tires. This information identifies and describes the fundamental characteristics of the tire and also provides a U.S. DOT Tire Identification Number for safety standard certification and in case of a recall.
This begins with the letters DOT and indicates that the tire meets all federal standards. The next two numbers or letters are the plant code designating where it was manufactured, the next two are the tire size code and the last four numbers represent the week and year the tire was built. For example, the numbers 317 mean the 31st week of 1997. After 2000, the numbers go to four digits. For example, 2501 means the 25th week of 2001. The numbers in between are identification codes used for traceability. This information is used to contact customers if a tire defect requires a recall.
Tire Replacement Requirements
Your vehicle is equipped with tires designed to provide a safe ride and handling capability.
WARNINGS
Only use replacement tires and wheels that are the same size, load index, speed rating and type (such as P-metric versus LT-metric or all-season versus all-terrain) as those originally provided by Ford. The recommended tire and wheel size may be found on either the Safety Compliance Certification Label (affixed to either the door hinge pillar, door-latch post, or the door edge that meets the door-latch post, next to the driver's seating position), or the Tire Label which
286
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
WARNINGS
is located on the B-Pillar or edge of the driver's door. If this information is not found on these labels, then you should contact your authorized dealer as soon as possible. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death.
To reduce the risk of serious injury, when mounting replacement tires and wheels, you should not exceed the maximum pressure indicated on the sidewall of the tire to set the beads without additional precautions listed below. If the beads do not seat at the maximum pressure indicated, re-lubricate and try again.
For a mounting pressure more than 20 psi (1.38 bar) greater than the maximum pressure, a Ford dealer or other tire service professional should do the mounting.
Always inflate steel carcass tires with a remote air fill with the person inflating standing at a minimum of 12 ft (3.66 m) away from the wheel and tire assembly.
WARNINGS When inflating the tire for mounting pressures up to 20 psi (1.38 bar) greater than the maximum pressure on the tire sidewall, the following precautions must be taken to protect the person mounting the tire:
· Make sure that you have the correct tire and wheel size.
· Lubricate the tire bead and wheel bead seat area again.
· Stand at a minimum of 12 ft (3.66 m) away from the wheel and tire assembly.
· Use both eye and ear protection.
Important: Remember to replace the wheel valve stems when the road tires are replaced on your vehicle.
It is recommended that the two front tires or two rear tires generally be replaced as a pair.
The tire pressure sensors mounted in the wheels (originally installed on your vehicle) are not designed to be used in aftermarket wheels.
The use of wheels or tires not recommended by Ford Motor Company may affect the operation of your tire pressure monitoring system.
287
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
If the tire pressure monitoring system indicator is flashing, your system is malfunctioning. Your replacement tire might be incompatible with your tire pressure monitoring system, or some component of the system may be damaged.
Safety Practices
WARNINGS If your vehicle is stuck in snow, mud or sand, do not rapidly spin the tires; spinning the tires can tear the tire and cause an explosion. A tire can explode in as little as three to five seconds.
Do not spin the wheels at over 34 mph (55 km/h). The tires may fail and injure a passenger or bystander.
Driving habits have a great deal to do with your tire mileage and safety.
*Observe posted speed limits
*Avoid fast starts, stops and turns
*Avoid potholes and objects on the road
*Do not run over curbs or hit the tire against a curb when parking
Highway Hazards
No matter how carefully you drive, there is always the possibility that you may eventually have a flat tire on the highway. Drive slowly to the closest safe area out of traffic. This may further damage the flat tire, but your safety is more important.
If you feel a sudden vibration or ride disturbance while driving, or you suspect your tire or vehicle has been damaged, immediately reduce your speed. Drive with caution until you can safely pull off the road. Stop and inspect the tires for damage. If a tire is under-inflated or damaged, deflate it, remove wheel and replace it with your spare tire and wheel. If you cannot detect a cause, have the vehicle towed to the nearest repair facility or tire dealer to have the vehicle inspected.
Tire and Wheel Alignment
A bad jolt from hitting a curb or pothole can cause the front end of your vehicle to become misaligned or cause damage to your tires. If your vehicle seems to pull to one side when you are driving, the wheels may be out of alignment. Have an authorized dealer check the wheel alignment periodically.
288
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
Wheel misalignment in the front or the rear can cause uneven and rapid treadwear of your tires and should be corrected by an authorized dealer. Front-wheel drive vehicles and those with an independent rear suspension (if equipped) may require alignment of all four wheels.
The tires should also be balanced periodically. An unbalanced tire and wheel assembly may result in irregular tire wear.
Tire Rotation
Note: If your tires show uneven wear, ask an authorized dealer to check for and correct any wheel misalignment, tire imbalance or mechanical problem involved before tire rotation.
Note: Your vehicle may be equipped with a dissimilar spare wheel and tire assembly. A dissimilar spare wheel and tire assembly is defined as a spare wheel and tire assembly that is different in brand, size or appearance from the road tires and wheels. If you have a dissimilar spare wheel and tire assembly, it is intended for temporary use only and should not be used in a tire rotation.
Note: After having your tires rotated, inflation pressure must be checked and adjusted to the vehicle requirements.
Rotating your tires at the recommended interval will help your tires wear more evenly, providing better tire performance and longer tire life. Sometimes irregular tire wear can be corrected by rotating the tires. See Scheduled Maintenance (page 455).
E142547
USING SNOW CHAINS
WARNING Snow tires must be the same size, load index, speed rating as those originally provided by Ford. Use of any tire or wheel not recommended by Ford can affect the safety and performance of your vehicle, which could result in an increased risk of loss of vehicle control, vehicle rollover, personal injury and death. Additionally, the use of non-recommended tires and wheels could cause steering, suspension, axle, transfer case or power transfer unit failure.
289
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
The tires on your vehicle have all-weather treads to provide traction in rain and snow. However, in some climates, you may need to use snow tires and cables. If you need to use cables, it is recommended that steel wheels (of the same size and specifications) be used, as cables may chip aluminum wheels.
Follow these guidelines when using snow tires and traction devices
· If possible, avoid fully loading your vehicle
· Purchase chains or cables from a manufacturer that clearly labels body to tire dimension restrictions.
· Use 10 mm cables or chains only on front axle with 235/55R17 tires.
· Not all S-class snow chains or cables meet these restrictions. Chains of this size restriction will include a tensioning device.
· The snow chains or cables must be mounted in pairs on the front axle.
· Do not use chains or cables on 235/50R18 and 235/45R19 tires.
· Install cables securely, verifying that the cables do not touch any wiring, brake lines or fuel lines.
· When driving with tire cables do not exceed 30 mph (48 km/h) or the maximum speed recommended by the chain manufacturer, whichever is less.
· Drive cautiously. If you hear the cables rub or bang against the vehicle, stop and retighten them. If this does not work, remove the cables to prevent vehicle damage.
· Remove the cables when they are no longer needed. Do not use cables on dry roads.
If you have any questions regarding snow chains or cables, please contact your authorized dealer.
TIRE PRESSURE MONITORING SYSTEM
WARNING
The tire pressure monitoring system is not a substitute for manually checking tire pressures. You should periodically check tire pressures using a pressure gauge. Failure to correctly maintain tire pressures could increase the risk of tire failure, loss of control, vehicle rollover and personal injury.
Note: You should only use tire sealants in roadside emergencies as they may cause damage to the tire pressure monitoring system sensor.
Note: If the tire pressure monitoring system sensor becomes damaged, it may not function.
Each tire, including the spare (if provided), should be checked monthly when cold and inflated to the inflation pressure recommended by the vehicle manufacturer on the vehicle placard or tire inflation pressure label. (If your vehicle has tires of a different size than the size indicated on the vehicle placard or tire inflation pressure label, you should determine the proper tire inflation pressure for those tires).
As an added safety feature, your vehicle has been equipped with a Tire Pressure Monitoring System (TPMS) that illuminates a low tire pressure telltale when one or more of your tires is significantly under-inflated. Accordingly, when the low tire pressure telltale illuminates, you should stop and check your tires as soon as possible, and inflate
290
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
them to the proper pressure. Driving on a significantly under-inflated tire causes the tire to overheat and can lead to tire failure. Under-inflation also reduces fuel efficiency and tire tread life, and may affect the vehicle's handling and stopping ability.
Please note that the TPMS is not a substitute for proper tire maintenance, and it is the driver's responsibility to maintain correct tire pressure, even if under-inflation has not reached the level to trigger illumination of the TPMS low tire pressure telltale.
Your vehicle has also been equipped with a TPMS malfunction indicator to indicate when the system is not operating properly. The TPMS malfunction indicator is combined with the low tire pressure telltale. When the system detects a malfunction, the telltale will flash for approximately one minute and then remain continuously illuminated. This sequence will continue upon subsequent vehicle start-ups as long as the malfunction exists.
When the malfunction indicator is illuminated, the system may not be able to detect or signal low tire pressure as intended. TPMS malfunctions may occur for a variety of reasons, including the installation of replacement or alternate tires or wheels on the vehicle that prevent the TPMS from functioning properly. Always check the TPMS malfunction telltale after replacing one or more tires or wheels on your vehicle to ensure that the replacement or alternate tires and wheels allow the TPMS to continue to function properly.
This device complies with Part 15 of the FCC Rules and with License exempt RSS Standards of Industry Canada. Operation is subject to the following two conditions:
1. This device may not cause harmful interference, and
2. This device must accept any interference received, including interference that may cause undesired operation.
Note: Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.
Changing Tires With a Tire Pressure Monitoring System
E142549
Note: Each road tire is equipped with a tire pressure sensor located inside the wheel and tire assembly cavity. The pressure sensor is attached to the valve stem. The pressure sensor is covered by the tire and is not visible unless the tire is removed. Take care when changing the tire to avoid damaging the sensor. You should always have your tires serviced by an authorized dealer. Check the tire pressure periodically (at least monthly) using an accurate tire gauge. See Inflating Your Tires in this chapter.
291
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
Understanding Your Tire Pressure Monitoring System
The tire pressure monitoring system measures pressure in your four road tires and sends the tire pressure readings to your vehicle. The low tire pressure warning light will turn on if the tire pressure is significantly low. Once the light is illuminated, your tires are under-inflated and need to be inflated to the manufacturer's recommended tire pressure. Even if the light turns on and a short time later turns off, your tire pressure still needs to be checked.
When Your Temporary Spare Tire is Installed
When one of your road tires needs to be replaced with the temporary spare, the system will continue to identify an issue to remind you that the damaged road wheel and tire assembly needs to be repaired and put back on your vehicle.
To restore the full function of the tire pressure monitoring system, have the damaged road wheel and tire assembly repaired and remounted on your vehicle.
When You Believe Your System is Not Operating Properly
The main function of the tire pressure monitoring system is to warn you when your tires need air. It can also warn you in the event the system is no longer capable of functioning as intended. See the following chart for information concerning your tire pressure monitoring system:
292
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
Low tire pressure warning light
Solid warning light
Flashing warning light
Possible cause Tire(s) under-inflated
Spare tire in use TPMS malfunction
Spare tire in use TPMS malfunction
Customer action required
Make sure tires are at the proper pressure. See Inflating your tires in this chapter. After inflating your tires to the manufacturer's recommended pressure as shown on the Tire Label (located on the edge of driver's door or the B-Pillar), the vehicle must be driven for at least two minutes over 20 mph (32 km/h) before the light turns off.
Repair the damaged road wheel and tire assembly and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When your temporary spare tire is installed in this section.
If the tires are properly inflated and the spare tire is not in use but the light remains on, contact your authorized dealer as soon as possible.
Repair the damaged road wheel and tire assembly and reinstall it on the vehicle to restore system function. For a description on how the system functions, see When your temporary spare tire is installed in this section.
If the tires are properly inflated and the spare tire is not in use but the light remains on, contact your authorized dealer as soon as possible.
When Inflating Your Tires
When putting air into your tires (such as at a gas station or in your garage), the tire pressure monitoring system may not respond immediately to the air added to your tires.
It may take up to two minutes of driving over 20 mph (32 km/h) for the light to turn off after you have filled your tires to the recommended inflation pressure.
293
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
How Temperature Affects Your Tire Pressure
The tire pressure monitoring system monitors tire pressure in each pneumatic tire. While driving in a normal manner, a typical passenger tire inflation pressure may increase about 24 psi (1428 kPa) from a cold start situation. If the vehicle is stationary overnight with the outside temperature significantly lower than the daytime temperature, the tire pressure may decrease about 3 psi (21 kPa) for a drop of 30°F (17°C) in ambient temperature. This lower pressure value may be detected by the tire pressure monitoring system as being significantly lower than the recommended inflation pressure and activate the system warning light for low tire pressure. If the low tire pressure warning light is on, visually check each tire to verify that no tire is flat. If one or more tires are flat, repair as necessary. Check the air pressure in the road tires. If any tire is under-inflated, carefully drive the vehicle to the nearest location where air can be added to the tires. Inflate all the tires to the recommended inflation pressure.
CHANGING A ROAD WHEEL
WARNINGS
The tire pressure monitoring system is not a substitute for manually checking tire pressures. You should periodically check tire pressures using a pressure gauge. Failure to correctly maintain tire pressures could increase the risk of tire failure, loss of control, vehicle rollover and personal injury.
If the tire pressure monitor sensor becomes damaged it may not function.
Note: You should only use tire sealants in roadside emergencies as they may cause damage to the tire pressure monitoring system sensor.
Note: The tire pressure monitoring system indicator light illuminates when the spare tire is in use. To restore the full function of the monitoring system, all road wheels equipped with tire pressure monitoring sensors must be mounted on the vehicle.
If you get a flat tire when driving, do not apply the brake heavily. Instead, gradually decrease your speed. Hold the steering wheel firmly and slowly move to a safe place on the side of the road.
Have a flat serviced by an authorized dealer in order to prevent damage to the tire pressure monitoring system sensors. See Tire Pressure Monitoring System (page 290). Replace the spare tire with a road tire as soon as possible. During repairing or replacing of the flat tire, have the authorized dealer inspect the tire pressure monitoring system sensor for damage.
Dissimilar Spare Wheel and Tire Assembly Information
WARNING
Failure to follow these guidelines could result in an increased risk of loss of vehicle control, injury or death.
If you have a dissimilar spare wheel and tire, then it is intended for temporary use only. This means that if you need to use it, you should replace it as soon as possible with a road wheel and tire assembly that is the same size and type as the road tires and wheels that were originally provided by Ford. If the dissimilar spare tire or wheel is damaged, it should be replaced rather than repaired.
294
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
A dissimilar spare wheel and tire assembly is defined as a spare wheel and tire assembly that is different in brand, size or appearance from the road tires and wheels and can be one of three types:
1. T-type mini-spare: This spare tire begins with the letter T for tire size and may have Temporary Use Only molded in the sidewall.
2. Full-size dissimilar spare with label on wheel: This spare tire has a label on the wheel that states: THIS WHEEL AND TIRE ASSEMBLY FOR TEMPORARY USE ONLY.
When driving with one of the dissimilar spare tires listed above, do not:
· Exceed 50 mph (80 km/h).
· Load the vehicle beyond maximum vehicle load rating listed on the Safety Compliance Label.
· Tow a trailer.
· Use snow chains on the end of the vehicle with the dissimilar spare tire.
· Use more than one dissimilar spare tire at a time.
· Use commercial car washing equipment.
· Try to repair the dissimilar spare tire.
Use of one of the dissimilar spare tires listed above at any one wheel location can lead to impairment of the following:
· Handling, stability and braking performance.
· Comfort and noise.
· Ground clearance and parking at curbs.
· Winter weather driving capability.
· Wet weather driving capability.
· All-wheel driving capability
3. Full-size dissimilar spare without label on wheel
When driving with the full-size dissimilar spare wheel and tire assembly, do not:
· Exceed 70 mph (113 km/h).
· Use more than one dissimilar spare wheel and tire assembly at a time.
· Use commercial car washing equipment.
· Use snow chains on the end of the vehicle with the dissimilar spare wheel and tire assembly.
The usage of a full-size dissimilar spare wheel and tire assembly can lead to impairment of the following:
· Handling, stability and braking performance.
· Comfort and noise.
· Ground clearance and parking at curbs.
· Winter weather driving capability.
· Wet weather driving capability.
· All-wheel driving capability
When driving with the full-size dissimilar spare wheel and tire assembly additional caution should be given to:
· Towing a trailer.
· Driving vehicles equipped with a camper body.
· Driving vehicles with a load on the cargo rack.
Drive cautiously when using a full-size dissimilar spare wheel and tire assembly and seek service as soon as possible.
Tire Change Procedure
WARNINGS Never place anything between the vehicle jack and the ground.
Never place anything between the vehicle jack and your vehicle.
295
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
WARNINGS It is recommended that the wheels of the vehicle be chocked, and that no person should remain in a vehicle that is being jacked.
The jack supplied with this vehicle is only intended for changing wheels. Do not use the vehicle jack other than when you are changing a wheel in an emergency.
Check that the vehicle jack is not damaged or deformed and the thread is lubricated and clean.
The jack should be used on level firm ground wherever possible.
Use only the specified jacking points. If you use other positions, you may damage the body, steering, suspension, engine, braking system or the fuel lines.
No person should place any portion of their body under a vehicle that is supported by a jack.
Note: The jack does not require maintenance or additional lubrication over the service life of your vehicle.
4. Remove the wing nut that secures the spare tire by turning it counterclockwise.
E160855
5. Remove the jack from the foam holder. The lug wrench is located in the left side storage foam next to the spare tire. Remove the flat tire retainer strap from the jack base.
E166722
1. Park on a level surface, set the parking brake and activate the hazard flashers.
2. Place the transmission in park (P) and turn the engine off.
3. Remove the carpeted wheel cover.
E142551
6. Block the diagonally opposite wheel.
7. Loosen each wheel lug nut one-half turn counterclockwise, but do not remove them until the wheel is raised off the ground.
Note: Jack at the specified locations to avoid damage to the vehicle.
8. The vehicle jacking points are shown here, and are depicted on the warning label on the jack.
296
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
1
E145908
9. Small arrow-shaped marks on the sills show the location of the jacking points. Turn the wrench clockwise to raise the vehicle until the flat tire is completely off the ground.
E273178
10. Remove the lug nuts with the lug wrench.
Note: If equipped with full wheel covers with exposed wheel nuts, remove the wheel nuts prior to removing the wheel cover or damage to the wheel cover may occur. 11. Replace the flat tire with the spare
tire, making sure the valve stem is facing outward. Reinstall the lug nuts until the wheel is snug against the hub. Do not fully tighten the lug nuts until the wheel has been lowered. 12. Lower the wheel by turning the jack handle counterclockwise.
3
4
5
2
E75442
13. Remove the jack and fully tighten the lug nuts in the order shown. See Technical Specifications (page 298).
Stowing the flat tire
1. Put the jack and lug wrench away. Make sure the jack is fastened so it does not rattle when you drive.
2. Unblock the wheels.
3. Stow the flat tire on the floor in the cargo area. Secure with the flat tire retainer strap by following the next steps:
E142906
297
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
4. Locate the cargo tie-down near the seatback. Push the loop of the retainer strap through the tie-down. Thread the non-loop end through the loop.
5. Weave the retainer strap through the wheel openings.
6. Locate the front cargo tie-down at the opposite corner of the cargo area to the tie-down used in Step 4. Thread the retainer strap through the tie-down and pull tight.
7. Secure by tying a 2-half hitch knot.
E157926
E143746
TECHNICAL SPECIFICATIONS
Wheel Lug Nut Torque Specifications WARNING
When a wheel is installed, always remove any corrosion, dirt or foreign materials present on the mounting surfaces of the wheel or the surface of the wheel hub, brake drum or brake disc that contacts the wheel. Make sure that any fasteners that attach the rotor to the hub are secured so they do not interfere with the mounting surfaces of the wheel. Installing wheels without correct metal-to-metal contact at the wheel mounting surfaces can cause the wheel nuts to loosen and the wheel to come off while your vehicle is in motion, resulting in loss of control.
298
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Wheels and Tires
Bolt size
Ib-ft (Nm)*
M12 x 1.5
100 (135)
*Torque specifications are for nut and bolt threads free of dirt and rust. Use only Ford recommended replacement fasteners.
Retighten the lug nuts to the specified torque within 100 miles (160 kilometers) after any wheel disturbance (such as tire rotation, changing a flat tire, wheel removal).
E145950
A Wheel pilot bore.
Inspect the wheel pilot bore and mounting surface prior to installation. Remove any visible corrosion or loose particles.
299
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
ENGINE SPECIFICATIONS - 1.5L ECOBOOSTTM
Measurement Cubic inches Compression ratio Firing order Spark plug gap
Drivebelt Routing
Specification 92
10.0:1 1-3-4-2 0.025-0.029 in. (0.65- 0.75 mm)
E251823
ENGINE SPECIFICATIONS - 2.0L ECOBOOSTTM
Measurement Cubic inches Required fuel Compression ratio Spark plug gap
Specification 122
Minimum 87 octane 9.3:1
0.027 - 0.031 in. (0.70 - 0.80 mm)
300
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Drivebelt Routing
A
A. The long drivebelt is on the first pulley groove closest to the engine.
B. The short drivebelt is on the second pulley groove farthest from engine.
B
E161383
ENGINE SPECIFICATIONS - 2.5L
Measurement Cubic inches Required fuel Compression ratio Spark plug gap
Specification 152
Minimum 87 octane 9.7:1
0.049 - 0.053 in. (1.25 - 1.35 mm)
301
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Drivebelt Routing
A
A. The long drivebelt is on the first pulley groove closest to the engine.
B. The short drivebelt is on the second pulley groove farthest from the engine.
B
E161383
MOTORCRAFT PARTS - 1.5L ECOBOOSTTM
Component
Motorcraft Part number
Air filter element.
FA-1908
Oil filter.
FL-910-S
Battery.
BXT-96R-590
Battery (with auto-start-stop / intelligent access).
BAGM-48H6-760
Spark plugs.
SP-539
Cabin air filter.
FP-70
Windshield wiper blade.
WW-2750 (driver side) WW-2705 (passenger side)
WW-1106 (rear window)
We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance. These parts meet or exceed Ford Motor Company's specifications and are engineered for your vehicle. Use of other parts may impact vehicle performance, emissions and durability. Your warranty may be void for any damage related to use of other parts.
If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36.
For spark plug replacement, contact an authorized dealer. Replace the spark plugs at the appropriate intervals.
302
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
MOTORCRAFT PARTS - 2.0L ECOBOOSTTM
Component
Motorcraft Part number
Air filter element.
FA-1908
Oil filter.
FL-910-S
Battery.
BXT-96R-590
Battery (with auto-start-stop / intelligent access).
BAGM-48H6-760
Spark plugs.
SP-537
Cabin air filter.
FP-70
Windshield wiper blade.
WW-2750 (driver side) WW-2705 (passenger side)
WW-1106 (rear window)
We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance. These parts meet or exceed Ford Motor Company's specifications and are engineered for your vehicle. Use of other parts may impact vehicle performance, emissions and durability. Your warranty may be void for any damage related to use of other parts.
If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36.
For spark plug replacement, contact an authorized dealer. Replace the spark plugs at the appropriate intervals.
303
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
MOTORCRAFT PARTS - 2.5L
Component
Motorcraft Part Number
Air filter element
FA-1910
Oil filter
FL-910-S
Battery
BXT-96R-590
Spark plugs
SP-530
Cabin air filter
FP-70
Windshield wiper blade
WW-2750 (driver side) WW-2705 (passenger side)
WW-1106 (rear window)
We recommend Motorcraft replacement parts available at your Ford dealer or at fordparts.com for scheduled maintenance. These parts meet or exceed Ford Motor Company's specifications and are engineered for your vehicle. Use of other parts may impact vehicle performance, emissions and durability. Your warranty may be void for any damage related to use of other parts.
If a Motorcraft oil filter is not available, use an oil filter that meets industry performance specification SAE/USCAR-36.
For spark plug replacement, contact an authorized dealer. Replace the spark plugs at the appropriate intervals.
304
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
VEHICLE IDENTIFICATION NUMBER
The vehicle identification number is located on the left-hand side of the instrument panel.
E142476
Please note that in the graphic, XXXX is representative of your vehicle identification number.
The Vehicle Identification Number contains the following information:
E142477
A B
C
D E F G H
World manufacturer identifier
Brake system, Gross Vehicle Weight Rating, Restraint Devices and their locations
Make, vehicle line, series, body type
Engine type
Check digit
Model year
Assembly plant
Production sequence number
305
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
VEHICLE CERTIFICATION LABEL
TRANSMISSION CODE DESIGNATION
E167469
The National Highway Traffic Safety Administration Regulations require that a Safety Compliance Certification Label be affixed to a vehicle and prescribe where the Safety Compliance Certification Label may be located. The Safety Compliance Certification Label shall be affixed to either the door hinge pillar, the door latch post, or the edge of the door near the door latch, next to the driver's seating position.
E167814
The transmission code is on the Safety Compliance Certification Label. The following table shows the transmission code along with the transmission description.
Description Six-speed automatic transmission 6F35
Code 6
306
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
CAPACITIES AND SPECIFICATIONS - 1.5L ECOBOOSTTM
Capacities
WARNING
The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.
Item
Capacity
Engine oil (with oil filter)
4.3 qt (4.1 L)
Engine coolant
12.5 qt (11.8 L)
Brake fluid
Between MIN/MAX on brake fluid reservoir
Rear differential fluid (All Wheel Drive)
2.4 pt (1.15 L)
Power Transfer Unit (PTU) fluid
17.9 fl oz (0.53 L)
Automatic transmission fluid
9.0 qt (8.5 L) *
Windshield washer fluid
Fill as required
Fuel tank
15.7 gal (59.4 L)
A/C refrigerant
24 oz (0.68 kg)
A/C refrigerant compressor oil
2.7 fl oz (80 ml)
*Approximate dry fill capacity. Actual amount may vary during fluid changes.
307
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Specifications
Materials
Name
Specification
Recommended motor oil (U.S.):
WSS-M2C945-A
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor
Oil
XO-5W20-QSP
Recommended motor oil (Canada): Motorcraft® SAE 5W-20 Super Premium Blend Motor Oil CXO-5W20-LSP12
WSS-M2C945-A
Recommended motor oil (Mexico): Motorcraft® SAE 5W-20 Synthetic Motor Oil MXO-5W20-QSP
WSS-M2C945-A
Optional motor oil (U.S. and Mexico): Motorcraft® SAE 5W-20 Full Synthetic Motor Oil XO-5W20-QFS
WSS-M2C945-A
Optional motor oil (Canada): Motorcraft® SAE 5W-20 Synthetic Motor Oil CXO-5W20-LFS12
WSS-M2C945-A
Engine coolant (U.S. and Mexico): Motorcraft® Orange Prediluted Antifreeze/Coolant VC-3DIL-B
WSS-M97B44-D2
Engine coolant (Canada): Motorcraft® Orange Prediluted Antifreeze/Coolant CVC-3DIL-B
WSS-M97B44-D2
Brake fluid:
WSS-M6C65-A2
Motorcraft® DOT 4 Low Viscosity (LV) High Performance
Motor Vehicle Brake Fluid
PM-20
Rear differential fluid (U.S.):
WSP-M2C197-A
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
XY-80W90-QL
Rear differential fluid (Canada):
WSP-M2C197-A
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
CXY-80W90-1L
Power Transfer Unit (PTU) fluid (U.S. and Mexico):
WSL-M2C192-A
Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant
308
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Name
Specification
XY-75W140-QL
Power Transfer Unit (PTU) fluid (Canada):
WSL-M2C192-A
Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant
CXY-75W140-1L
Automatic transmission fluid (U.S.):
WSS-M2C938-A
Motorcraft® MERCON LV Automatic Transmission Fluid MERCON LV
XT-10-QLVC
Automatic transmission fluid (Canada):
WSS-M2C938-A
Motorcraft® MERCON LV Automatic Transmission Fluid MERCON LV
CXT-10-LV12
Windshield washer fluid (U.S.): Motorcraft® Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
WSS-M14P19-A
Windshield washer fluid (Canada):
WSS-M14P19-A
Motorcraft® Premium Quality Windshield Washer Fluid
CXC-37-(A, B, D, F)
A/C refrigerant (U.S.): R-1234yf Refrigerant YN-33-A
WSS-M17B21-A
A/C refrigerant (Canada): R-1234yf Refrigerant HS7Z-19B519-BA
WSS-M17B21-A
A/C refrigerant (Mexico): Motorcraft® R-134a Refrigerant MYN-19
WSH-M17B19-A
A/C refrigerant compressor oil (U.S. and Canada): Motorcraft® R-1234yf Refrigerant PAG Oil YN-35
WSS-M2C300-A2
A/C refrigerant compressor oil (Mexico): Motorcraft® PAG Refrigerant Compressor Oil YN-12-D
WSH-M1C231-B
309
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Name
Multi-purpose grease: Motorcraft® Multi-Purpose Grease Spray XL-5-A
Lock cylinders (U.S.): Penetrating and Lock Lubricant XL-1
Lock cylinders (Canada): Penetrating Fluid CXC-51-A
Specification ESB-M1C93-B
--
--
If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to:
· Component damage which is not covered by the vehicle warranty.
· Longer engine cranking periods.
· Increased emission levels.
· Reduced engine performance.
· Reduced fuel economy.
· Degraded brake performance.
We recommend Motorcraft® motor oil for your vehicle. If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.
E142732
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure.
310
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Note: Automatic transmissions that require MERCON® LV transmission fluid should only use MERCON® LV transmission fluid. The use of any other fluid may cause transmission damage.
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance, we recommend that you use the following alternative engine oil in extremely cold climates, where the ambient temperature reaches -22.0°F (-30°C) or below.
Materials
Name
Motorcraft® SAE 0W-20 Premium Synthetic Blend Motor Oil: Engine Oil - SAE 0W-20 XO-0W20-QSP
Specification WSS-M2C947-A
E240522
CAPACITIES AND SPECIFICATIONS - 2.0L ECOBOOSTTM
Capacities WARNING
The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.
311
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Item
Capacity
Engine oil (with oil filter)
5.7 qt (5.4 L)
Engine coolant
10.9 qt (10.3 L)
Brake fluid
Between MIN/MAX on brake fluid reservoir
Rear differential fluid
2.4 pt (1.15 L)
Power Transfer Unit (PTU) fluid
17.9 fl oz (0.53 L)
Automatic transmission fluid
9.0 qt (8.5 L) *
Windshield washer fluid
Fill as required
Fuel tank
15.7 gal (59.4 L)
A/C refrigerant
24 oz (0.68 kg)
A/C refrigerant compressor oil
2.7 fl oz (80 ml)
*Approximate dry fill capacity. Actual amount may vary during fluid changes.
Specifications
Materials
Name
Specification
Recommended motor oil (U.S.):
WSS-M2C946-A
Motorcraft® SAE 5W-30 Premium Synthetic Blend Motor
Oil
XO-5W30-QSP
Recommended motor oil (Canada): Motorcraft® SAE 5W-30 Super Premium Motor Oil CXO-5W30-LSP12
Recommended motor oil (Mexico): Motorcraft® SAE 5W-30 Synthetic Motor Oil MXO-5W30-QSP
Optional motor oil (U.S. and Mexico): Motorcraft® SAE 5W-30 Full Synthetic Motor Oil XO-5W30-QFS
WSS-M2C946-A WSS-M2C946-A WSS-M2C946-A
Optional motor oil (Canada): Motorcraft® SAE 5W-30 Synthetic Motor Oil CXO-5W30-LFS12
Engine coolant (U.S. and Mexico):
WSS-M2C946-A WSS-M97B44-D2
312
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Name
Specification
Motorcraft® Orange Prediluted Antifreeze/Coolant VC-3DIL-B
Engine coolant (Canada): Motorcraft® Orange Prediluted Antifreeze/Coolant CVC-3DIL-B
WSS-M97B44-D2
Brake fluid:
WSS-M6C65-A2
Motorcraft® DOT 4 Low Viscosity (LV) High Performance
Motor Vehicle Brake Fluid
PM-20
Rear differential fluid (U.S.):
WSP-M2C197-A
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
XY-80W90-QL
Rear differential fluid (Canada):
WSP-M2C197-A
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
CXY-80W90-1L
Rear differential fluid (Mexico):
WSP-M2C197-A
Motorcraft® SAE 80W-90 Premium Rear Axle Lubricant
MXY-80W90-QL
Power Transfer Unit (PTU) fluid (U.S. and Mexico):
WSL-M2C192-A
Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant
XY-75W140-QL
Power Transfer Unit (PTU) fluid (Canada):
WSL-M2C192-A
Motorcraft® SAE 75W-140 Synthetic Rear Axle Lubricant
CXY-75W140-1L
Automatic transmission fluid (U.S. and Mexico):
WSS-M2C938-A
Motorcraft® MERCON LV Automatic Transmission Fluid MERCON LV
XT-10-QLVC
Automatic transmission fluid (Canada):
WSS-M2C938-A
Motorcraft® MERCON LV Automatic Transmission Fluid MERCON LV
CXT-10-LV12
Windshield washer fluid (U.S. and Mexico): Motorcraft® Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
WSS-M14P19-A
Windshield washer fluid (Canada):
WSS-M14P19-A
Motorcraft® Premium Quality Windshield Washer Fluid
CXC-37-(A, B, D, F)
313
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Name
A/C refrigerant (U.S.): R-1234yf Refrigerant YN-33-A
A/C refrigerant (Canada): R-1234yf Refrigerant HS7Z-19B519-BA
A/C refrigerant (Mexico): Motorcraft® R-134a Refrigerant MYN-19
A/C refrigerant compressor oil (U.S. and Canada): Motorcraft® R-1234yf Refrigerant PAG Oil YN-35
A/C refrigerant compressor oil (Mexico): Motorcraft® PAG Refrigerant Compressor Oil YN-12-D
Multi-purpose grease: Motorcraft® Multi-Purpose Grease Spray XL-5-A
Lock cylinders (U.S.): Penetrating and Lock Lubricant XL-1
Lock cylinders (Canada): Penetrating Fluid CXC-51-A
Lock cylinders (Mexico): Penetrating and Lock Lubricant MXL-1
Specification WSS-M17B21-A WSS-M17B21-A WSH-M17B19-A WSS-M2C300-A2 WSH-M1C231-B ESB-M1C93-B ----
If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to:
· Component damage which is not covered by the vehicle warranty.
· Longer engine cranking periods.
· Increased emission levels.
· Reduced engine performance.
· Reduced fuel economy.
· Degraded brake performance.
We recommend Motorcraft® motor oil for your vehicle. If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.
314
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
E142732
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure.
Note: Automatic transmissions that require MERCON® LV transmission fluid should only use MERCON® LV transmission fluid. The use of any other fluid may cause transmission damage.
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance, we recommend that you use the following alternative engine oil in extremely cold climates, where the ambient temperature reaches -22.0°F (-30°C) or below.
Materials
Name
Specification
Motorcraft® SAE 0W-30 Premium Synthetic Blend Motor Oil:
Engine Oil - SAE 0W-30
WSS-M2C953-A1
XO-0W30-QSP
315
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
E240523
CAPACITIES AND SPECIFICATIONS - 2.5L
Capacities
WARNING
The air conditioning refrigerant system contains refrigerant under high pressure. Only qualified personnel should service the air conditioning refrigerant system. Opening the air conditioning refrigerant system can cause personal injury.
Item
Capacity
Engine oil (with oil filter)
5.7 qt (5.4 L)
Engine coolant
11.3 qt (10.7 L)
Brake fluid
Between MIN/MAX on brake fluid reservoir
Automatic transmission fluid
9.0 qt (8.5 L) *
Windshield washer fluid
Fill as required
Fuel tank
15.7 gal (59.4 L)
A/C refrigerant
24 oz (0.68 kg)
A/C refrigerant compressor oil
4.5 fl oz (133 ml)
*Approximate dry fill capacity. Actual amount may vary during fluid changes.
316
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Specifications
Materials
Name
Specification
Recommended motor oil (U.S.):
WSS-M2C945-A
Motorcraft® SAE 5W-20 Premium Synthetic Blend Motor
Oil
XO-5W20-QSP
Recommended motor oil (Canada): Motorcraft® SAE 5W-20 Super Premium Blend Motor Oil CXO-5W20-LSP12
WSS-M2C945-A
Recommended motor oil (Mexico): Motorcraft® SAE 5W-20 Synthetic Motor Oil MXO-5W20-QSP
WSS-M2C945-A
Optional motor oil (U.S. and Mexico): Motorcraft® SAE 5W-20 Full Synthetic Motor Oil XO-5W20-QFS
WSS-M2C945-A
Optional motor oil (Canada): Motorcraft® SAE 5W-20 Synthetic Motor Oil CXO-5W20-LFS12
WSS-M2C945-A
Engine coolant (U.S. and Mexico): Motorcraft® Orange Prediluted Antifreeze/Coolant VC-3DIL-B
WSS-M97B44-D2
Engine coolant (Canada): Motorcraft® Orange Prediluted Antifreeze/Coolant CVC-3DIL-B
WSS-M97B44-D2
Brake fluid:
WSS-M6C65-A2
Motorcraft® DOT 4 Low Viscosity (LV) High Performance
Motor Vehicle Brake Fluid
PM-20
Automatic transmission fluid (U.S. and Mexico):
WSS-M2C938-A
Motorcraft® MERCON LV Automatic Transmission Fluid MERCON LV
XT-10-QLVC
Automatic transmission fluid (Canada):
WSS-M2C938-A
Motorcraft® MERCON LV Automatic Transmission Fluid MERCON LV
CXT-10-LV12
Windshield washer fluid (U.S. and Mexico):
WSS-M14P19-A
317
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
Name
Specification
Motorcraft® Premium Windshield Wash Concentrate with Bitterant ZC-32-B2
Windshield washer fluid (Canada):
WSS-M14P19-A
Motorcraft® Premium Quality Windshield Washer Fluid
CXC-37-(A, B, D, F)
A/C refrigerant (U.S.): R-1234yf Refrigerant YN-33-A
WSS-M17B21-A
A/C refrigerant (Canada): R-1234yf Refrigerant HS7Z-19B519-BA
WSS-M17B21-A
A/C refrigerant (Mexico): Motorcraft® R-134a Refrigerant MYN-19
WSH-M17B19-A
A/C refrigerant compressor oil (U.S. and Canada): Motorcraft® R-1234yf Refrigerant PAG Oil YN-35
WSS-M2C300-A2
A/C refrigerant compressor oil (Mexico): Motorcraft® PAG Refrigerant Compressor Oil YN-12-D
WSH-M1C231-B
Multi-purpose grease: Motorcraft® Multi-Purpose Grease Spray XL-5-A
ESB-M1C93-B
Lock cylinders (U.S.):
--
Penetrating and Lock Lubricant
XL-1
Lock cylinders (Canada):
--
Penetrating Fluid
CXC-51-A
Lock cylinders (Mexico):
--
Penetrating and Lock Lubricant
MXL-1
318
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
If you use oil and fluids that do not meet the defined specification and viscosity grade, this may lead to: · Component damage which is not
covered by the vehicle warranty. · Longer engine cranking periods. · Increased emission levels. · Reduced engine performance. · Reduced fuel economy. · Degraded brake performance. We recommend Motorcraft® motor oil for your vehicle. If Motorcraft® oil is not available, use motor oils of the recommended viscosity grade that meet API SN requirements and display the API Certification Mark for gasoline engines. Do not use oil labeled with API SN service category unless the label also displays the API certification mark.
E142732
An oil that displays this symbol conforms to current engine, emission system and fuel economy performance standards of ILSAC.
Do not use supplemental engine oil additives because they are unnecessary and could lead to engine damage that may not be covered by your vehicle warranty.
Note: Ford recommends using DOT 4 Low Viscosity (LV) High Performance Brake Fluid or equivalent meeting WSS-M6C65-A2. Use of any fluid other than the recommended fluid may cause degraded brake performance and not meet the Ford performance standards. Keep brake fluid clean and dry. Contamination with dirt, water, petroleum products or other materials may result in brake system damage and possible failure.
Note: Automatic transmissions that require MERCON® LV transmission fluid should only use MERCON® LV transmission fluid. The use of any other fluid may cause transmission damage.
Alternative Engine Oil for Extremely Cold Climates
To improve engine cold start performance, we recommend that you use the following alternative engine oil in extremely cold climates, where the ambient temperature reaches -22.0°F (-30°C) or below.
Name
Motorcraft® SAE 0W-20 Premium Synthetic Blend Motor Oil: Engine oil - SAE 0W-20 XO-0W20-QSP
Specification WSS-M2C947-A
319
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Capacities and Specifications
E240522
320
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
GENERAL INFORMATION
Radio Frequencies and Reception Factors
AM and FM frequencies are established by the Federal Communications Commission (FCC) and the Canadian Radio and Telecommunications Commission (CRTC). Those frequencies are:
· AM: 530-1710 kHz · FM: 87.9-107.9 MHz
Note: Listening to loud audio for long periods of time could damage your hearing.
Distance and strength Terrain Station overload
Radio Reception Factors
The further you travel from an AM or FM station, the weaker the signal and the weaker the reception.
Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with the reception.
When you pass a ground-based broadcast repeating tower, a stronger signal may overtake a weaker one and result in the audio system muting.
CD and CD Player Information
Note: CD units play commercially pressed 4.7 in (12 cm) audio compact discs only. Due to technical incompatibility, certain recordable and re-recordable compact discs may not function correctly when used in the vehicle's CD player.
Note: Do not insert CDs with homemade paper (adhesive) labels into the CD player as the label may peel and cause the CD to become jammed. You should use a permanent felt tip marker rather than adhesive labels on your homemade CDs. Ballpoint pens may damage CDs. Ask an authorized dealer for more information.
Note: Do not use any irregularly shaped discs or discs with a scratch protection film attached.
Always handle discs by their edges only. Clean the disc with an approved CD cleaner only. Wipe it from the center of the disc toward the edge. Do not clean in a circular motion.
Do not expose discs to direct sunlight or heat sources for extended periods.
321
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
MP3 and WMA Track and Folder Structure
Audio systems capable of recognizing and playing MP3 and WMA individual tracks and folder structures work as follows:
· There are two different modes for MP3 and WMA disc playback: MP3 and WMA track mode (system default) and MP3 and WMA folder mode.
· MP3 and WMA track mode ignores any folder structure on the MP3 and WMA disc. The player numbers each MP3 and WMA track on the disc (noted by the MP3 or WMA file extension) from T001 to a maximum of T255. The maximum number of playable MP3 and WMA files may be less depending on the structure of the CD and exact model of radio present.
· MP3 and WMA folder mode represents a folder structure consisting of one level of folders. The CD player numbers all MP3 and WMA tracks on the disc (noted by the MP3 or WMA file extension) and all folders containing MP3 and WMA files, from F001 (folder) T001 (track) to F253 T255.
· Creating discs with only one level of folders helps with navigation through the disc files.
If you are burning your own MP3 and WMA discs, it is important to understand how the system reads the structures you create. While various files may be present (files with extensions other than MP3 and WMA), only files with the MP3 and WMA
extension are played; other files are ignored by the system. This enables you to use the same MP3 and WMA disc for a variety of tasks on your work computer, home computer and your in-vehicle system.
In track mode, the system displays and plays the structure as if it were only one level deep (all MP3 and WMA files play, regardless of being in a specific folder). In folder mode, the system only plays the MP3 and WMA files in the current folder.
AUDIO UNIT - VEHICLES WITH: AM/FM/CD/SYNC
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Note: Depending on your vehicle options, your system may look different from what you see here.
322
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
E249988
A Vol and Power: Turn to adjust the volume. Press to switch the system on and off.
B Function buttons: Select different functions of the audio system depending on which mode you are in (such as Radio mode or CD mode).
C CD slot: Insert a CD.
D Eject: Press to eject a CD.
E Number block: In radio mode, you can store your favorite radio stations. To store a radio station, tune to the station, then press and hold a preset button until sound returns. In CD mode, select a track. In phone mode, enter a phone number.
323
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
F Tune and Play or Pause: In radio mode, press to search through the radio frequency band. In media mode, turn to select a new track. Press to either play or pause a track. This button also mutes the radio sources.
G Phone: Press to access the phone features of the SYNC system. See your SYNC information.
H Menu: Press to access different audio system features.
I Clock: Press to access the clock setting. Use the center arrow controls to change the hours and minutes. You can also set the clock by pressing MENU and scrolling to Clock Settings. If not in phone mode, press to display the clock.
J Seek, Fast Forward and Reverse: In radio mode, select a frequency band and press either button. The system stops at the first station it finds in that direction. In CD mode, press to select the next or previous track. Press and hold to move quickly forward or backward through the current track.
K OK and cursor arrows: Press the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set, or press MENU to exit.
L Sound: Press to access settings for Treble, Midrange, Bass, Fade and Balance. Use the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set or press MENU to exit. Sound settings can be set for each audio source independently.
M Radio: Press to listen to the radio or change radio stations. Press the function buttons below the radio screen to select different radio functions.
N Media: Press to open the media source menu. You can press this multiple times to change to CD or to a SYNC-Media device or scroll through the media sources using the arrow buttons. Press OK to select a source.
AUDIO UNIT - VEHICLES WITH: AM/FM/CD/SYNC/ TOUCHSCREEN DISPLAY
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
324
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
Note: Some features, such as SIRIUS satellite radio, may not be available in your location. Check with an authorized dealer.
Note: The touchscreen system controls most of the audio features. See your SYNC information.
E185024
A TUNE: In radio mode, press to search through the radio frequency band. In SIRIUS mode, press to find the previous or next available satellite radio station.
B CD slot: Insert a CD.
C Vol and Power: Turn to adjust the volume. Press to switch the system on and off.
D SOURCE: Press to access different audio modes, for example AM, FM and CD.
E Eject: Press to eject a CD.
F DISP: Press to switch the display screen on and off.
G SOUND: Press to access settings for Treble, Midrange, Bass, Fade or Balance.
H Seek, Fast Forward and Reverse: In radio mode, select a frequency band and press either button. The system stops at the first station it finds in that direction. In SIRIUS mode, press to select the next or previous satellite radio station. If you select a specific category (such as jazz, rock or news), press to find the next or previous station in the category you select. In CD mode, press to select the next or previous track. Press and hold to move quickly forward or backward through the current track.
325
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
AUDIO UNIT - VEHICLES WITH: SONY AUDIO SYSTEM
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Note: Some features, such as SIRIUS satellite radio, may not be available in your location. Check with an authorized dealer.
Note: The touchscreen system controls most of the audio features. See your SYNC information.
Note: The CD slot is directly above the touchscreen.
E143844
A Power: Press to switch the system on and off.
B SOURCE: Press to access different audio modes, for example AM, FM, Media, and Satellite Radio.
C Seek, Fast Forward and Reverse: In radio mode, select a frequency band and press either button. The system stops at the first station it finds in that direction. In SIRIUS mode, press to select the next or previous satellite radio station. If you select a specific category (such
326
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
as jazz, rock or news), press to find the next or previous station in the category you select. In CD mode, press to select the next or previous track. Press and hold to move quickly forward or backward through the current track.
D TUNE: In radio mode, press to search through the radio frequency band. In SIRIUS mode, press to find the previous or next available satellite radio station.
E Volume: Turn to adjust the volume.
F SOUND: Press to access settings for Treble, Midrange, Bass, Fade or Balance.
G Eject: Press to eject a CD.
AUDIO UNIT - VEHICLES WITH: AM/FM/CD
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Note: Depending on your vehicle option package, your system may look different from what you see here.
327
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
E225879
A Vol and Power: Turn to adjust the volume. Press to switch the system on and off.
B CD slot: Insert a CD.
C Eject: Press to eject a CD.
D Memory presets: Store your favorite radio stations. To store a radio station, tune to the station, then press and hold a preset button until sound returns.
E TUNE and Play or Pause: In radio mode, turn to search the frequency band in individual increments. Press to mute the station. In media mode, turn to select a new track. Press to either play or pause a track. This button also mutes the radio sources.
F MENU: Press to access different audio system features. See Menu Structure.
328
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
G INFO: Press to access any available radio or CD information.
H Clock: Press to access the clock setting. Use the center arrow controls to change the hours and minutes. You can also set the clock by pressing MENU and scrolling to Clock Settings. If not in phone mode, press to display the clock.
I OK and cursor arrows: Press the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set, or press MENU to exit.
J Seek, Fast Forward and Reverse: In radio mode, select a frequency band and press either button. The system stops at the first station it finds in that direction. In SIRIUS mode, press to select the next or previous satellite radio station. If a specific category is selected (such as jazz, rock or news), press to find the next or previous station in the selected category. In CD mode, press to select the next or previous track. Press and hold to move quickly forward or backward through the current track.
K SOUND: Press to access settings for Treble, Midrange, Bass, Fade and Balance. Use the up and down arrow buttons to select the various settings. When you make your selection, press the left and right arrow buttons to change the settings. Press OK to set or press MENU to exit. Sound settings can be set for each audio source independently.
L RADIO: Press to listen to the radio or change radio stations. Press the function buttons below the radio screen to select different radio functions.
M MEDIA: Press to open the media source menu. You can press this multiple times to change to CD or to a SYNC-Media device or scroll through the media sources using the arrow buttons. Press OK to select a source.
Menu Structure
Note: Depending on your system, some options may appear slightly different.
Press MENU.
Press the up and down arrow buttons to scroll through the options.
Press the right arrow to enter a menu. Press the left arrow to exit a menu.
Press OK to confirm a selection.
329
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
Radio
Manual Tune
Use the left and right arrows to go up or down the frequency band.
Scan
Select for a brief sampling of all available channels.
AST
Select to store the six strongest local stations on the AMAST and FM-AST frequency bands.
Set Category for Seek/Scan Select to have the system search by certain music categories (such as Rock, Pop or Country).
RDS Text Display
Select to view additional broadcast data, if available. This feature defaults to off. RBDS must be on for you to set a category.
SIRIUS
Scan
Select for a brief sampling of all available channels.
Electronic Serial Number (ESN)
Select to view your satellite radio electronic serial number (ESN). You will need this number when communicating with SIRIUS to activate, modify or track your account.
Check Channel Guide
Select to view available satellite radio channels. Press OK to open a list of the following options for this channel. Once you skip or lock a channel, you can only access it by pressing Direct Tune and entering the channel number. Locking or unlocking a channel requires your PIN.
Set Category for Seek/Scan Select to view channel categories (such as Pop, Rock or News). If you select a category, seek and scan functions only stop on channels in that category.
Alerts
Select to switch alerts on or off for songs, artists or teams. The system alerts you when the selection is playing on another channel. Save up to 20 alerts.
Unlock All Stations
Use your PIN to unlock previously locked stations.
Skip No Stations
Use to restore any channels you previously skipped.
Parental Lockout
Select to create a PIN, which allows you to lock or unlock channels. Your initial PIN is 1234.
330
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
Speed Compensated Volume Sound Occupancy Mode DSP
Scan All Scan Folder CD Compression
Set Date and Time 24 Hour
Brightness Language Temp. Setting
Audio Settings Automatically adjusts the volume to compensate for speed and wind noise. You can set the system between 0 and +7. Select to adjust settings for Treble, Midrange, Bass, Fade or Balance. Select to optimize sound quality for the chosen seating position. Choose between the stereo modes.
CD Settings Select to scan all disc selections. Select to scan all music in the current MP3 folder. Select to bring soft and loud passages together for a more consistent listening level.
Clock Settings Select to set the time and calendar date. Select to view clock time in a 12-hour mode or 24-hour mode.
Display Settings Select to change display brightness. Select to display the language in English, French or Spanish. Select to display the outside temperature in Fahrenheit or Celsius.
331
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
DIGITAL RADIO (If Equipped)
Note: HD Radio broadcasts are not available in all markets.
HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives. Digital broadcasts provide a better sound quality than analog broadcasts with free, crystal-clear audio and no static or distortion. For more information, and a guide to available stations and programming, please visit www.hdradio.com.
When HD Radio is on and you tune to a station broadcasting HD Radio technology, you may notice the HD Radio logo on your screen. When this logo is available, you may also see Title and Artist fields on-screen.
The multicast indicator appears in FM mode (only) if the current station is broadcasting multiple digital broadcasts. The highlighted numbers signify available digital channels where new or different content is available. HD1 signifies the main programming status and is available in analog and digital broadcasts. Other multicast stations (HD2 through HD7) are only available digitally.
When HD Radio broadcasts are active, you can access the following functions:
· Scan allows you to hear a brief sampling of all available stations. This feature still works when HD Radio reception is on, although it does not scan for HD2-HD7 channels. You may see the HD logo appear if the station has a digital broadcast.
· Memory presets allow you to save an active channel as a memory preset. Touch and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station. Sound returns when finished. When switching to an HD2 or HD3 memory preset, the sound mutes before the digital audio plays, because the system has to reacquire the digital signal.
Note: As with any saved radio station, you cannot access a station you save if your vehicle is outside the station's reception area.
332
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
HD Radio Reception and Station Troubleshooting
Reception area Station blending
Potential Reception Issues
If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
If you are listening to HD1, the system switches back to the analog broadcast until the digital broadcast is available again. However, if you are listening to any of the possible HD2-HD7 multicast channels, the station mutes and stays muted unless it is able to connect to the digital signal again.
When the system first receives a station (aside from HD2HD7 multicast stations), it first plays the station in the analog version. Once the receiver verifies the station is an HD Radio station, it shifts to the digital version. Depending on the station quality, you may hear a slight sound change when the station changes from analog to digital. Blending is the shift from analog to digital sound or digital back to analog sound.
In order to provide the best possible experience, use the contact form to report any station issues found while listening to a station broadcasting with HD Radio technology. Independent entities own and operate each station. These stations are responsible for ensuring all audio streams and data fields are accurate.
333
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
Potential Station Issues
Issues
Cause
Action
Echo, stutter, skip or repeat in audio. Increase or decrease in audio volume.
This is poor time alignment by the radio broadcaster.
No action required. This is a broadcast issue.
Sound fading or blending in The radio is shifting between No action required. The
and out.
analog and digital audio. reception issue may clear up
as you continue to drive.
There is an audio mute
The digital multicast is not No action required. This is
delay when selecting HD2 or available until the HD Radio normal behavior. Wait until
HD3, multicast preset or broadcast is decoded. Once the audio is available.
Direct Tune.
decoded, the audio is avail-
able.
Cannot access HD2 or HD3 multicast channel when recalling a preset or from a direct tune.
The previously stored multicast preset or direct tune is not available in your current reception area.
No action required. The station is not available in your current location.
Text information does not match currently playing audio.
Data service issue by the radio broadcaster.
Fill out the station issue form at website listed
below.*
There is no text information Data service issue by the shown for currently selected radio broadcaster. frequency.
Fill out the station issue form at website listed
below.*
HD2-HD7 stations not found Pressing Scan disables
No action required. This is
when Scan is pressed.
HD2-HD7 channel search. normal behavior.
*http://hdradio.com/stations/feedback
HD Radio Technology manufactured under license from iBiquity Digital Corporation and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of DTS Ford Motor Company and DTS are not responsible for the content sent using HD Radio technology. Content may be changed, added or deleted at any time at the station owner's discretion.
SATELLITE RADIO (If Equipped)
SiriusXM® Satellite Radio broadcasts a variety of music, news, sports, weather, traffic and entertainment satellite radio channels. For more information and a complete list of SiriusXM satellite radio channels, visit www.siriusxm.com in the United States, www.siriusxm.ca in Canada, or call SiriusXM at 1-888-539-7474.
334
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
Note: This receiver includes the eCos real-time operating system. eCos is published under the eCos License.
Satellite Radio Reception Factors
Potential satellite radio reception issues
Antenna obstructions
For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other material as far away from the antenna as possible.
Terrain
Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception.
Station overload
When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a weaker one and the audio system may mute.
Satellite radio signal interfer- Your display may show ACQUIRING . . . to indicate the
ence
interference and the audio system may mute.
SiriusXM Satellite Radio Service Note: SiriusXM reserves the unrestricted right to change, rearrange, add or delete programming including canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
E208625
SiriusXM satellite radio is a subscription-based satellite radio service that broadcasts a variety of music, sports, news, weather, traffic and entertainment programming. Your factory-installed SiriusXM satellite radio system includes hardware and a limited subscription term, which begins on the date of sale or lease of your vehicle. See an authorized dealer for availability.
For more information on extended subscription terms (a service fee is required), the online media player and a complete list of SiriusXM satellite radio channels, and other features, please visit www.siriusxm.com in the United States, www.siriusxm.ca in Canada, or call SiriusXM at 1-888-539-7474.
Satellite Radio Electronic Serial Number (ESN)
You need your ESN to activate, modify or track your satellite radio account. When in satellite radio mode, tune to channel 0.
335
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
Troubleshooting
Message Acquiring...
Satellite antenna fault SIRIUS system failure
Invalid Channel Unsubscribed Channel
No Signal
Updating...
Questions? Call 1-888-539-7474 None found Check Channel Guide Subscription Updated
Condition
Action
Radio requires more than two seconds to produce audio for the selected channel.
No action required. This message should disappear shortly.
There is an internal module or system failure present.
If this message does not clear shortly, or with an ignition key cycle, your receiver may have a fault. See an authorized dealer for service.
The channel is no longer available.
Tune to another channel or choose another preset.
Your subscription does not include this channel.
Contact SiriusXM at 1-888539-7474 to subscribe to the channel, or tune to another channel.
The signal is lost from the SiriusXM satellite or SiriusXM tower to your vehicle antenna.
The signal is blocked. When you move into an open area, the signal should return.
Update of channel programming in progress.
No action required. The process may take up to three minutes.
Your satellite service is no longer available.
Contact SiriusXM at 1-888539-7474 to resolve subscription issues.
All the channels in the
Use the channel guide to
selected category are either turn off the Lock or Skip
skipped or locked.
function on that station.
SiriusXM has updated the No action required. channels available for your vehicle.
336
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Audio System
USB PORT
WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
E201595
The USB port allows you to plug in media playing devices, memory sticks and charge devices (if supported). See your SYNC information.
337
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
GENERAL INFORMATION
E198355
SYNC is an in-vehicle communications system that works with your Bluetooth-enabled cellular phone and portable media player. This allows you to:
· Make and receive calls.
· Access and play music from your portable music player.
· Use 911 Assist and applications, such as Spotify and Glympse, via SYNC AppLink.*
· Access phonebook contacts and music using voice commands.
· Stream music from your connected phone.
· Text message.
· Use the advanced voice recognition system.
· Charge your USB device (if your device supports this).
*These features are not available in all markets and may require activation. Available AppLink enabled apps vary by market.
Make sure that you review your device's manual before using it with SYNC.
Support
The SYNC support team is available to help you with any questions you cannot answer on your own.
Monday-Saturday, 8:30am-9:00pm EST.
338
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Sunday, 10:30am-7:30pm EST.
In the United States, call 1-800-392-3673.
In Canada, call 1-800-565-3673.
Times are subject to change due to holidays.
SYNC Owner Account
Why do I need a SYNC owner account? · Essential for keeping up with the latest
software downloads available for SYNC. · Access to customer support for any questions you may have.
Driving Restrictions
For your safety, certain features are speed-dependent and restricted when your vehicle is traveling over 3 mph (5 km/h).
Safety Information
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
When using SYNC:
· Do not operate playing devices if the power cords or cables are broken, split or damaged. Place cords and cables out of the way, so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities.
· Do not leave playing devices in your vehicle during extreme conditions as it could cause them damage. See your device's manual for further information.
· Do not attempt to service or repair the system. See an authorized dealer.
Privacy Information
When a cellular phone is connected to SYNC, the system creates a profile within your vehicle that is linked to that cellular phone. This profile is created in order to offer you more cellular features and to operate more efficiently. Among other things, this profile may contain data about your cellular phone book, text messages (read and unread), and call history, including history of calls when your cellular phone was not connected to the system. In addition, if you connect a media device, the system creates and retains an index of supported media content. The system also records a short development log of approximately 10 minutes of all recent system activity. The log profile and other system data may be used to improve the system and help diagnose any problems that may occur.
The cellular profile, media device index, and development log will remain in the vehicle unless you delete them and are generally accessible only in the vehicle when the cellular phone or media player is connected. If you no longer plan to use the system or the vehicle, we recommend you perform a Master Reset to erase all stored information.
339
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
System data cannot be accessed without special equipment and access to the vehicle's SYNC module. Ford Motor Company and Ford of Canada will not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company and Ford of Canada. For further privacy information, see the section on 911 Assist. See SYNCTM Applications and Services (page 354).
USING VOICE RECOGNITION
This system helps you control many features using voice commands. This allows you to keep your hands on the wheel and focus on what is around you.
Initiating a Voice Session
E142599
Press the voice button. A list of available voice commands appears in the display.
Global Voice Commands
These voice commands are always available. You can say them at any time.
Global voice commands
(cancel | exit)
This command ends the voice session. You can also cancel a session by holding the voice button for two or more seconds.
help
This command provides you with hints, examples and instructions.
(main menu | start again)
This command restarts the voice session from the initial starting point.
You can say any of the voice commands that appear within open and close brackets that are separated by |. For example, where; (cancel | exit) appears you say; cancel or exit.
Helpful Hints
· Make sure the interior of your vehicle is as quiet as possible. Wind noise from open windows and road vibrations may prevent the system from correctly recognizing spoken commands.
· Before giving a voice command, wait for the system announcement to finish, followed by a single tone. Any command spoken before this does not register with the system.
· Speak naturally, without long pauses between words.
· You can interrupt the system at any time while it is speaking by pressing the voice button. You can cancel a voice session by pressing and holding the voice button.
340
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
System Interaction and Feedback
The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction. You can customize the voice recognition system to provide more or less instruction and feedback.
The default setting is to a higher level of interaction in order to help you learn to use the system. You can change these settings at any time.
Adjusting the Interaction Level
E142599
Press the voice button. When prompted, say:
Voice Command voice settings Then either of the following: interaction mode novice
interaction mode advanced
Action and Description
Provides more detailed interaction and guidance. (Recommended for first time users.) Provides less audible interaction and guidance.
Confirmation Prompts
Confirmation prompts are short questions the system asks when it is not sure of your request or when there is more than one possible response to your request.
To adjust this setting press the voice button, when prompted say:
Voice Command
Action and Description
voice settings Then either of the following: confirmation prompts off
confirmation prompts on
Make a best guess from the command; you may still occasionally be asked to confirm settings.
Clarify your voice command with a short question.
Phone Confirmation
Using phone confirmations the system asks you to verify before placing any calls.
341
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
To adjust this setting press the voice button, when prompted say:
Voice Command
Action and Description
voice settings
Then any of the following:
phone confirmation on
When enabled, this feature will prompt you to confirm any voice initiated call command prior to the call being placed.
phone confirmation off
The system will make a best guess; you may still occasionally be asked to confirm settings.
Changing the Voice Settings
In addition to using voice commands to change the voice settings, you can also use the menu in the audio display.
To change the voice settings press the Menu button then select:
Menu Item
SYNC-Settings
Voice settings
Note: Depending on the current climate control settings, the fan speed may automatically go down while issuing voice commands or while making and receiving phone calls via SYNC to reduce the amount of background noise in the vehicle. The fan speed will automatically return to normal operation once the voice session ends. Fan speed can also be adjusted normally during a voice session, simply press fan buttons (or turn fan knob) to increase or decrease fan speed to desired setting.
To disable this automatic fan speed reduction feature during voice sessions, press and hold the climate control AC and Recirculated air buttons simultaneously, release and then increase fan speed within 2 seconds. To re-enable this feature, repeat the above sequence.
USING SYNCTM WITH YOUR PHONE
Hands-free calling is one of the main features of SYNC. While the system supports a variety of features, many are dependent on your cellular phone's functionality. At a minimum, most cellular phones with Bluetooth wireless technology support the following functions:
· Answering an incoming call.
· Ending a call.
· Using privacy mode.
· Dialing a number.
· Redialing.
· Call waiting notification.
· Caller ID.
342
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features. To check your phone's compatibility, see your phone's manual and visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca.
Pairing a Phone for the First Time
Wirelessly pairing your phone with SYNC allows you to make and receive hands-free calls.
Note: SYNC can support downloading up to approximately 4000 entries per Bluetooth-enabled cellular phone.
Note: Make sure to switch on the ignition and the radio. Shift the transmission into park (P) for automatic transmission or first gear for manual transmission.
Using the Audio System
Note: To scroll through the menus, press the up and down arrows on your audio system.
1. Make sure to switch on your phone's Bluetooth feature before starting the search. See your device's manual if necessary.
2. Press the PHONE button. When the audio display indicates there is no paired phone, select the option to add.
3. When a message to begin pairing appears in the audio display, search for SYNC on your phone to start the pairing process.
4. When prompted on your cell phone's display, confirm that the PIN provided by SYNC matches the PIN displayed on your cell phone. Your phone is now paired and the display indicates that the pairing was successful. If you are prompted to enter a PIN on your device, enter the PIN displayed on the screen. The display indicates when the pairing is successful.
Depending on your phone's capability and your market, the system may prompt you with questions, such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) and downloading your phonebook.
Using Voice Commands
Make sure to switch on your phone's Bluetooth feature E142599 before starting the search. See your device's manual if necessary.
Press the voice and when prompted say:
Voice Command Action and Description
(pair ([Bluetooth] device | phone | Bluetooth audio) | add phone)
Follow the instructions on the audio display.
You can say any of the voice commands that appear within open and close brackets that are separated by |. For example, where; (what's | what is) appears you say; what's or what is.
The commands that have [ ] around the word means that the word is optional.
343
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Depending on your phone's capability and your market, the system may prompt you with questions, such as setting the current phone as the primary phone (the phone SYNC automatically tries to connect with first upon vehicle start-up) and downloading your phonebook.
Pairing Subsequent Phones
Note: Make sure to switch on the ignition and the radio. Shift the transmission into park (P) for automatic transmission or first gear for manual transmission.
Note: To scroll through the menus, press the up and down arrows on your audio system.
1. Make sure to switch on your phone's Bluetooth feature before starting the search. See your device's manual if necessary.
2. Press the PHONE button.
3. Select the option for Bluetooth Devices.
4. Press the OK button.
5. Select the option to add. This starts the pairing process.
6. When a message to begin pairing appears in the audio display, search for SYNC on your device.
7. When prompted on your cell phone's display, confirm that the PIN provided by SYNC matches the PIN displayed on your cell phone. Your phone is now paired and the display indicates that the pairing was successful. If you are prompted to enter a PIN on your device, enter the PIN displayed on the screen. The display indicates when the pairing is successful.
SYNC may prompt you with more cell phone options. Your cell phone may also prompt you to give SYNC permission to access information. For more information on your cell phone's capability, see your cell phone's manual and visit the website.
Phone Voice Commands
E142599
Press the voice button. When prompted, say any of the following:
Voice Command
(phone | Blackberry | iPhone)
Then say any of the following:
call (___)
call ___ at home
call ___ ((in|at) [the] office | at work)
call ___ on (cell | mobile)
call ___ on other
dial [[a] number]
1
([go to] privacy | transfer to phone 2 | privacy on)
(hold call [on] | place call on hold) 2
join (calls | call)
2
mute call [on]
2
(mute call off | un-mute call)
2
(turn ringer on | silent mode off) (turn ringer off | silent mode [on])
344
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Voice Command
[text] (messages | message)
3
help
___ is a dynamic listing that should be the name of a contact in your phonebook. For example you could say "Call Home". 1 See Dial table below.
2 These commands are only valid while in a phone call. 3 See the text message table below.
Dial Commands
Press the voice button and when prompted say any of the following commands:
Voice Commands 411 (four-one-one), 911 (nine-one-one)
700 (seven hundred) 800 (eight hundred) 900 (nine hundred) Clear (deletes all entered digits) Delete (deletes last set of digits entered)
Number <0-9> Plus
Pound (#) Star (*)
Note: To exit dial mode, press and hold the phone button or press any button on the audio system.
To access text messages say: Voice Command
[text] (messages | message) Then say any of the following: (listen to | read) ([text] message) forward (text | [text] message) reply to (text | [text] message) call [sender]
Phonebook Hints To hear how the SYNC system speaks a name browse phonebook, select a contact and press:
Menu Item Hear it
Changing Devices Using Voice Commands Using SYNC, you can easily access multiple phones, ipods, or USB devices. to switch devices say:
345
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Voice Command
(connect | device) ___
You can state the name of the desired device, such as "My iPhone","My Galaxy"
or"My iPod". SYNC may ask you to confirm the type of device (Phone, USB, or
Bluetooth Audio).
Making Calls
E142599
Press the voice button. When prompted, say:
Voice Command
call [[a] name]
dial [[a] number]
SYNC prompts you to say the numbers that you wish to dial. After you say the numbers, the system confirms it. You can then say:
When the system has stated the number, you say any of the following:
Voice Command
(dial | send) This initiates the call.
(delete | correct)
This erases the spoken digits.
To end the call, press the end call button
on the steering wheel or select the end call option in the audio display.
Receiving Calls
Accepting calls
When receiving a call, you can answer the call by pressing the accept call button on the steering wheel or use the screen.
To use the screen to accept a call select:
Menu Item
Accept
Rejecting Calls
When receiving a call, you can reject the call by pressing the reject call button on the steering wheel or use the screen.
To use the screen to reject a call select:
Reject
Menu Item
Ignore the call by doing nothing.
Phone Options during an Active Call
During an active call, you have more menu features that become available, such as putting a call on hold or joining calls.
To access this menu, choose one of the options available at the bottom of the audio display or select More to choose from the following options:
346
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Menu Item Mic. off Privacy Hold Dial a number Join calls
Phonebook
Call History
Description and action
Switch your vehicle's microphone off. To switch the microphone on, select the option again.
Switch a call from an active hands-free environment to your cellular phone for a more private conversation. When selected, the audio display indicates the call is private.
Put an active call on hold. When selected, the audio display indicates the call is on hold.
Enter numbers using the audio system's numeric keypad (for example, numbers for passwords).
Join two separate calls. The system supports a maximum of three callers on a multiparty or conference call. 1. Select the More option. 2. Access the desired contact through the system or use voice commands to place the second call. Once actively in the second call, select the More option. 3. Scroll to the option to join calls and press the OK button.
Access your phonebook contacts. 1. Select the More option. 2. Scroll to the option for phonebook and press the OK button. 3. Scroll through your phonebook contacts. 4. Press the OK button again when the desired contact appears in the audio display. 5. Press the OK button or dial button to call the selection.
Access your call history log. 1. Select the More option. 2. Scroll to the option for call history and press the OK button. 3. Scroll through your call history options (incoming, outgoing or missed). 4. Press the OK button again when the desired selection appears in the audio display. 5. Press the OK button or dial button to call the selection.
Accessing Features through the Phone Menu
You can access your call history, phonebook, sent text messages, as well as access phone and system settings.
1. Press the PHONE button to enter the phone menu.
2. Select one of the options available.
347
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Display Dial a number Phonebook
Call History
Speed Dial Text messaging BT Devices Phone settings
Description and action
Enter numbers using the audio system's numeric keypad.
Access your downloaded phonebook. 1. Press the OK button to confirm and enter. You can use the options at the bottom of the screen to access an alphabetical category quickly. You can also use the letters on the audio system's numeric keypad to jump in the list. 2. Scroll through your phonebook contacts. 3. Press the OK button again when the desired selection appears in the audio display. 4. Press the OK button or dial button to call the selection.
Access any previously dialed, received or missed calls. 1. Press the OK button to select. 2. Scroll to select incoming, outgoing or missed calls. Press the OK button to make your selection. 3. Press the OK button or dial button to call the selection.
Select 1 of 10 speed dial entries. To set a speed dial entry, go to the phonebook and then press and hold one of the numbers on the audio system's numeric keypad.
Send, download and delete text messages.
Access the option for Bluetooth Device menu listings (add, connect, set as primary, on or off, delete).
View various settings and features on your phone.
Text Messaging
Note: This is a phone-dependent feature.
SYNC allows you to receive, send, download and delete text messages. The system can also read incoming text messages to you so that you do not have to take your eyes off the road.
Receiving a Text Message
Note: This is a phone-dependent feature. Your phone must support downloading text messages using Bluetooth to receive incoming text messages.
Note: This is a speed-dependent feature and is only available when your vehicle is traveling at 3 mph (5 km/h) or less.
When a new message arrives, an audible tone sounds and the audio display indicates you have a new message.
To hear the message you can say:
Voice command
Description and action
(listen to | read) ([text] message)
Select this option to have the system read the message to you.
348
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Using the screen you also have the following options:
Menu Item
Description and action
Ignore Select this option, or do nothing, and the message goes into your text message inbox.
View
Select the view option to open the text message. Once selected, you have the ability to have the message read to you, to view other messages. For additional options select:
More... If you select this option, use the arrow button to scroll through the following options:
Reply to sender
Press the OK button to access, and then scroll through a list of pre-defined messages to send.
Call sender Press the OK button to call the sender of the message.
Forward msg.
Press the OK button to forward the message to anyone in your phonebook or call history. You can also choose to enter a number.
Sending, Downloading and Deleting Your Text Messages
1. Press the PHONE button.
2. Select the text messaging option, and then press the OK button.
Choose from the following options:
Menu Item New View
Delete
More...
Description and action
Allows you to send a new text message based on a pre-defined set of 15 messages.
Allows you to read the full message and, in addition, provides the option to have the system read the message to you. To go to the next message, select the More option. This allows you to reply to the sender, call the sender or forward the message.
Allows you to delete current text messages from the system (not your cellular phone). The audio display indicates when the system has deleted all your text messages.
Allows you to delete all messages or manually trigger a download of all unread messages from your cellular phone.
349
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Sending a Text Message
Note: You can only send a text message to one recipient at a time.
1. Select the send option when the desired selection highlights in the audio display.
2. Select the confirmation option when the contact appears.
3. Press the OK button again to confirm when the system asks if you want to send the message. A pre-defined signature appears on each text message.
Note: You can send text messages either by choosing a contact from the phonebook and selecting the text option from the audio display or by replying to a received message in the inbox.
Accessing Your Phone Settings
These are phone-dependent features. Your phone settings allow you to access and adjust features such as your ring tone and text message notification, modify your phonebook, and set up automatic download.
1. Press the PHONE button.
2. Scroll until the phone settings option appears, and then press the OK button.
Scroll to select from the following options:
Menu Item Set as master
Phone status Set ringtone
Text msg notify Phonebook pref.
Description and action
If this option is checked, the system uses the cellular phone as the master when there is more than one cellular phone paired to the system. This option can be changed for all cellular phones (not only the active phone) using the Bluetooth Devices menu.
See the cellular phone name, provider name, cellular phone number, and signal level. When done, press the left arrow buttons to return to the phone status menu.
Select which ringtone sounds during an incoming call (one of the system's tones or your cellular phone's). If your phone supports in-band ringing, your phone's ringtone sounds when you choose the cellular phone ringtone option. 1. Press the OK button to select and scroll to hear each ringtone. 2. Press the OK button to select a ringtone.
Have the option of hearing an audible tone to notify you when a text message arrives. Press the OK button to switch the audible tone off or on.
Modify the contents of your phonebook (such as add, delete or download). Press the OK button to select and scroll between the choices in the phonebook preferences table below.
350
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Menu Item Add contacts Delete Download now Auto-download
Sorting Pref.
Phonebook preferences
Push the desired contacts on your cellular phone. See your device's manual on how to push contacts. Press the OK button to add more contacts from your phonebook.
When a message asking you to delete appears, select the option to confirm. Press the OK button to delete the current phonebook and call history. The system takes you back to the menu for phone settings.
Press the OK button to select and download your phonebook to the system.
When automatic download is on, the system deletes any changes (additions or deletions) saved in the system since your last download.
When automatic download is off, the system does not download your phonebook when your cellular phone connects to SYNC.
You can only access your phonebook, call history and text messages when your paired cellular phone connects to the system. Check or uncheck this option to download your phonebook automatically each time your phone connects to the system. Download times are phonedependent and quantity-dependent.
Enabling this feature allows you to select how your contacts are displayed. You can select:
First/Last name
Last/First name
Bluetooth Devices
The Bluetooth Devices menu allows you to add, connect and delete devices as well as set a phone as primary.
1. Press the PHONE button.
2. Scroll until Bluetooth Devices appears, and then press the OK button.
Select from the following options:
Add
Menu Item
Description and action
Pair additional phones to the system. 1. Select the option to add to start the pairing process.
351
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Menu Item
Delete Master Conn. Discon.
Description and action
2. When a message to begin pairing appears in the audio display, search for SYNC on your phone. See your phone's manual if necessary. 3. When prompted on your cell phone's display, confirm that the PIN provided by SYNC matches the PIN displayed on your cell phone. Skip the next step. If you are prompted to enter a PIN on your device, it does not support Secure Simple Pairing. To pair, enter the PIN displayed on the screen. The display indicates when the pairing is successful. 4. When the option to set the phone as primary appears, select either yes or no. 5. SYNC may prompt you with more cell phone options. Your cell phone may also prompt you to give SYNC permission to access information. For more information on your cell phone's capability, see your cell phone's manual and visit the website.
Select the delete option and confirm when the system asks to delete the selected device. After deleting a phone from the list, you have to repeat the pairing process to pair it again.
The system attempts to connect with the primary cellular phone each time you switch on the ignition. When you select a cellular phone as primary, it appears first in the list, marked with an asterisk. Set a previously paired phone as master by selecting the master option and confirming it as the primary.
Connect a previously connected phone. You can only have one phone connected at a time to use the phone's functionality. When you connect another phone, the previous phone disconnects from the telephone services. The system allows you to use different Bluetooth devices for the cellular phone functionality and the Bluetooth audio music playback feature at the same time.
Disconnects the selected cellular phone. Select this option and confirm when asked. After disconnecting a phone, you can reconnect it again without repeating the full pairing process.
System Settings 1. Press the MENU button.
2. Select the SYNC settings option, and then press the OK button.
352
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Scroll to select from the following options:
Display
Description and action
Bluetooth on
Check or uncheck this option to switch the system's Bluetooth interface off or on. Select this option, and then press the OK button to change the option's status.
Set defaults
Return to the factory default settings without erasing your indexed information (such as phonebook, call history, text messages and paired devices). Select this option and confirm when prompted in the audio display.
Master reset
Completely erase all information stored in the system (such as phonebook, call history, text messages and paired devices) and return to factory default settings.
Install on SYNC
Install downloaded applications or software updates. Select this option and confirm when prompted in the audio display. There must be a valid SYNC application or update available on the USB drive in order to finish an installation successfully.
System info
Display the system's version numbers as well as its serial number. Press the OK button to select.
Voice settings
The voice settings submenu contains various options. See Using Voice Recognition (page 340).
Browse USB
Browse the actual menu structure of the connected USB device. Press the OK button and use the up and down arrow buttons to scroll through the folders and files. Use the left or right arrow buttons to enter or leave a folder. You can select media content for playback from this menu.
353
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
SYNCTM APPLICATIONS AND SERVICES (If Equipped)
In order for the following features to work, your cellular phone must be compatible with SYNC. To check your phone's compatibility, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca.
· 911 Assist: Can alert 911 in the event of an emergency.
· SYNC AppLink: Allows you to connect to and use certain applications such as Spotify and Glympse (if your phone is compatible).
These features may require activation. Available AppLink enabled apps vary by market.
911 Assist
WARNINGS
Unless the 911 Assist setting is set on before a crash, the system will not dial for help which could delay response time, potentially increasing the risk of serious injury or death after a crash.
Do not wait for 911 Assist to make an emergency call if you can do it yourself. Dial emergency services immediately to avoid delayed response time which could increase the risk of serious injury or death after a crash. If you do not hear 911 Assist within five seconds of the crash, the system or phone may be damaged or non-functional.
Always place your phone in a secure location in your vehicle so it does not become a projectile or get damaged in a crash. Failure to do so may cause serious injury to someone or damage the phone which could prevent 911 Assist from working properly.
Note: The SYNC 911 Assist feature must be set on before the incident.
Note: The SYNC 911 Assist feature only operates in the U.S., Canada or in a territory in which 911 is the emergency number.
Note: Before setting this feature on, make sure that you read the 911 Assist Privacy Notice later in this section for important information.
Note: If any user switches 911 Assist to on or off, that setting applies for all paired phones. If 911 Assist is switched off, either a voice message plays or a display message or an icon comes on when your vehicle is started and after a previously paired phone connects.
Note: Every phone operates differently. While SYNC 911 Assist works with most cellular phones, some may have trouble using this feature.
If a crash deploys an airbag (excluding knee airbags and rear inflatable safety belts [if equipped]) or activates the fuel pump shut-off, your SYNC-equipped vehicle may be able to contact emergency services by dialing 911 through a paired and connected Bluetooth-enabled phone. You can learn more about the 911 Assist feature, visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca.
See Supplementary Restraints System (page 38). Important information about airbag deployment is in this chapter.
See Roadside Emergencies (page 216). Important information about the fuel pump shut-off is in this chapter.
354
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Setting 911 Assist On or Off
Press Menu then select
Menu Item
Action and Description
SYNC-Applications
911 Assist Select the desired option, on or off.
If you choose not to activate this feature you will have the following options:
Menu Item
Action and Description
Voice Provides a display and voice
Reminder reminder at phone connection
ON
at vehicle start.
Voice Provides a display reminder
Reminder only without a voice reminder
OFF
at phone connection.
To make sure that 911 Assist works properly:
· SYNC must be powered and working properly at the time of the incident and throughout feature activation and use.
· The 911 Assist feature must be set on before the incident.
· You must pair and connect a Bluetooth-enabled and compatible cell phone to SYNC.
· A connected Bluetooth-enabled phone must have the ability to make and maintain an outgoing call at the time of the incident.
· A connected Bluetooth-enabled phone must have adequate network coverage, battery power and signal strength.
· The vehicle must have battery power and be located in the U.S., Canada or in a territory in which 911 is the emergency number.
In the Event of a Crash
Not all crashes deploy an airbag or activate the fuel pump shut-off (the triggers for 911 Assist). If a connected cell phone sustains damage or loses its connection to SYNC during a crash, SYNC searches for and tries to connect to a previously paired cell phone; SYNC then attempts to call the emergency services.
Before making the call:
· SYNC provides a short window of time (about 10 seconds) to cancel the call. If you fail to cancel the call, SYNC attempts to dial 911.
· SYNC says the following, or a similar message: "SYNC will attempt to call 911, to cancel the call, press Cancel on your screen or press and hold the phone button on your steering wheel".
If you do not cancel the call, and SYNC makes a successful call, a pre-recorded message plays for the 911 operator, and then the occupant(s) in your vehicle is able to talk with the operator. Be prepared to provide your name, phone number and location immediately, because not all 911 systems are capable of receiving this information electronically.
911 Assist May Not Work If
· Your cellular phone or 911 Assist hardware sustains damage in a crash.
· The vehicle's battery or the SYNC system has no power.
· The phone(s) thrown from your vehicle are the ones paired and connected to the system.
355
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
911 Assist Privacy Notice
When you switch on 911 Assist, it may disclose to emergency services that your vehicle has been in a crash involving the deployment of an airbag or activation of the fuel pump shut-off. Certain versions or updates to 911 Assist may also be capable of electronically or verbally disclosing to 911 operators your vehicle location or other details about your vehicle or crash to assist 911 operators to provide the most appropriate emergency services. If you do not want to disclose this information, do not switch the feature on.
SYNC Mobile Apps
The system enables voice and steering wheel control of SYNC AppLink enabled smartphone apps. When an app is running through AppLink, you can control main features of the app through voice commands and steering wheel controls.
Note: You must pair and connect your smartphone to SYNC to access AppLink.
Note: iPhone users need to connect the phone to the USB port.
Note: Android users need to connect the phone to SYNC using Bluetooth.
Note: For information on available apps, supported smartphone devices and troubleshooting tips please visit the Ford website.
Availability of SYNC AppLink enabled Apps will vary by region.
Note: Make sure you have an active account for the app that you have downloaded. Some apps work automatically with no setup. Other apps want you to configure your personal settings and personalize your experience by creating stations or favorites. We recommend you do this at home or outside of your vehicle.
Note: AppLink is not available if your vehicle is equipped with the MyFordTouch system.
To Access Using the SYNC Menu
Press the MENU button to access the menu on-screen. Then select:
Menu Item
Action and Description
SYNC-Apps
Mobile Apps
Scroll through the list of available applications and select a particular app or select:
Find New Apps
Note: If you cannot find a compatible SYNC AppLink app, make sure the required app is running on the mobile device.
Accessing an App's Menu
When an app is running through SYNC, press the right arrow button on the steering wheel control to access the app menu.
You can access various app features from here, for example thumbs up and thumbs down.
Press the left arrow button on the steering wheel control to exit the app menu.
356
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
To Access Using Voice Commands
Press the voice button then when prompted say:
Menu Item
Action and Description
mobile (apps | applications)
help
Say the name of the application after the tone. The app should start. When an app is running through SYNC, you can press the voice button and speak commands specific to the
app, for example "Play Playlist Road Trip".
Use this command to discover the available voice commands.
SYNC Mobile App Voice Commands
The following voice commands are always available:
Menu Item mobile (apps | applications)
Action and Description
SYNC prompts you to say the name of an app to start it on SYNC.
list [mobile] (apps | applications)
SYNC lists all of the currently available mobile apps.
find [new] [mobile] (apps | applications) Searches your connected mobile device for SYNC-compatible mobile apps.
help
You can say the name of a mobile app at any time to start the mobile app on SYNC.
App Permissions
App permissions are organized by groups. You can grant these group permissions individually. You can change a permission group status any time when not driving, by using the settings menu.
When you launch an app using SYNC, the system may ask you to grant certain permissions, for example:
· To allow your vehicle to provide vehicle information to the app such as, but not limited to: Fuel level, fuel economy, fuel consumption, engine speed, rain sensor, odometer, VIN, external temperature, gear position, tire pressure, and head lamp status.
· To allow your vehicle to provide driving characteristic information such as, but not limited to: MyKey, seat belt status, engine revolutions per minute, gear position, braking events, steering wheel angle, and accelerator pedal position.
357
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
· To allow your vehicle to provide location information, including: GPS and speed.
· To allow the app to send push notifications using the vehicle display and voice capabilities while running in a background state. Push notifications may be particularly useful for news or
location based apps.
Note: You only need to grant permissions the first time you use an app with SYNC.
Note: Ford is not responsible or liable for any damages or loss of privacy relating to usage of an app, or dissemination of any vehicle data that you approve Ford to provide to an app.
Enabling and Disabling App Permissions Using the SYNC Menu
Press the MENU button to access the SYNC menu then select:
Menu Item
Action and Description
SYNC-Apps
Mobile Apps
All Apps
You can also select a specific app. If the app supports push notifications, this setting is listed. Select to enable or disable the feature as required.
Enabling SYNC Mobile Apps
In order to enable mobile apps, SYNC requires user consent to send and receive app authorization information and updates using the data plan associated with the connected device.
Data is sent to Ford in the United States through the connected device. The information is encrypted and includes your VIN, SYNC module number, anonymous usage statistics and debugging information. Updates may take place automatically.
Note: You must enable mobile apps for each connected device the first time you select a mobile app using the system.
Note: Standard data rates apply. Ford is not responsible for any additional charges you may receive from your service provider, when your vehicle sends or receives data through the connected device. This includes any additional charges incurred due to driving in areas when roaming out of a home network.
App Status
You can view the current status of an app in the settings menu.
358
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
There are three possible statuses: Menu Item
Update Needed
Up-To-Date Updating...
Action and Description
The system has detected a new app requiring authorization or a general
permissions update is required.
No update is required.
The system is trying to receive an update.
Update settings Menu Item
Request Update
Disable Updates
Action and Description
Select this option from the settings menu to manually preform a needed update.
Select this option from the settings menu to disable automatic updates.
Doing so also disables the use of Mobile Apps on SYNC.
USING SYNCTM WITH YOUR MEDIA PLAYER
You can access and play music from your digital music player over your vehicle's speaker system using the system's media menu or voice commands. You can also sort and play your music by specific categories, such as artist and album.
Note: The system is capable of indexing up to 15,000 songs.
SYNC is capable of hosting nearly any digital media player including: iPod, Zune, plays from device players, and most USB drives. SYNC also supports audio formats, such as MP3, WMA, WAV and ACC.
Confirm that the USB device has been formatted correctly and has the following specifications: · USB 2.0. · File format must be FAT16/32.
The format of the audio files on the USB device must be: · MP3. · Non DRM protected WMA. · WAV. · AAC.
Connecting Your Digital Media Player to the USB Port
Note: If your digital media player has a power switch, make sure you switch it on before plugging it in.
359
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
To Connect Using Voice Commands
Plug the device into one of the vehicle's USB ports.
Press the voice button and when prompted, say:
Voice Command Action and Description
(USB [stick] | iPod | MP3 [player])
You can now play music by saying any of the appropriate voice commands. See the media voice commands.
To Connect Using the System Menu
1. Plug the device into one of the vehicle's USB ports.
2. Press the MEDIA button and select either USB 1 or USB 2 from the media source list in the audio display.
Words in brackets [ ] are optional and do not have to be spoken for the system to understand the command. For example, for where (USB [stick] | iPOD | MP3 [player]) appears, you can say USB or USB stick.
To view USB content select:
Message
Description and Action
Browse USB
Depending on how many media files are on your connected device, an indexing message may appear in the display. When indexing is complete, the selected source starts to playback audio automatically.
You can browse the files on the USB device in categories. Select BROWSE from the buttons at the bottom of the audio display and choose from the following:
Message
Play all
Playlists
Songs
Artists
Albums Genres Browse USB Reset USB
Message
Media Voice Commands
E142599
Press the voice button and when prompted say:
360
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Voice Command
Description and Action
(USB [stick] | iPod | MP3 You can now play music by saying any of the appropriate
[player])
voice commands.
You can say any of the voice commands that appear within open and close brackets that are separated by |. For example, where; (what's | what is) appears you say; what's or what is.
You must say any of the voice commands that appear outside of open and close brackets. For example, where; (what's | what is) playing, you must say either "what's playing" or "what is playing".
Command
Description and Action
pause
Pauses device playback.
play
Resumes device playback.
play [album] ___
play all
Play all media on the device from the first track to the last.
play [artist] ___
play [genre] ___
play [playlist] ___
next [track | title | song | file | podcast | Plays the next track on the current media. chapter | episode]
previous [track | title | song | file | podcast | chapter | episode]
Plays the previous track on current media.
[play] (similar music | more like this) Creates a playlist with a similar genre to the one currently playing.
play [song | track | title | file] ___
repeat off
repeat (one | track) [on]
Repeats the current track.
361
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Command
Description and Action
shuffle [all] [on]
Plays the current playlist in a random order. (Not all devices support this command.)
shuffle off
((who's | who is) this | who plays this | At any time during playback, you can press (what's | what is) playing [now] | (what the voice button and ask the system what is
| which) (song | track | artist) is this | playing. The system reads the metadata tags (who's | who is) playing | (what's | what (if populated) of the current track.
is) this)
___ is a dynamic listing, meaning that it could be the name of anything, such as a group, artist or song. For example you could say "Play artist The Beatles".
Examples of USB Commands
SYNC provides the user with many intuitive ways to find and play a song using voice. For example, if we have a song called "Penny Lane" from the album "Magical Mystery Tour" we can say the following to play this song:
· Play song "Penny Lane".
· Play "Penny Lane".
If we wanted to play the entire album, we can say:
· Play album "Magical Mystery Tour". · Play "Magical Mystery Tour".
Bluetooth Audio
The system is also capable of playing music from your cellular phone through Bluetooth.
To switch the Bluetooth Audio on, press the MEDIA button and select:
BT audio
Menu Item
Then any of the following:
Voice Command pause play next [track | title | song | file | podcast | chapter | episode] previous [track | title | song | file | podcast | chapter | episode]
Media Menu Features
The media menu allows you to select how to play your music (such as by artist, genre, shuffle or repeat), find similar music or reset the index of your USB devices.
Press the MEDIA button and select either USB 1 or USB 2 from the media source list in the audio display to start USB playback.
362
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Message Options
Description and Action This will enter the media menu.
Then any of the following:
Message Shuffle Repeat track Similar music
Reset USB
Description and Action
Choose to shuffle or repeat your music. Once you make your choice, it remains on until you switch it off.
Choose to shuffle or repeat your music. Once you make your choice, it remains on until you switch it off.
You can play similar types of music to the current playlist from the USB port. The system uses the metadata information of each track to compile a playlist. The system then creates a new list of similar tracks and then begins playing. Each track must have the metadata tags populated for this feature. With certain playing devices, if your metadata tags are not populated, the tracks will not be available in voice recognition, the play menu or this option. However, if you place these tracks onto your playing device in mass storage device mode they are available in voice recognition, the play menu or this option. The system places unknowns into any unpopulated metadata tag.
Resets the USB index. After the new indexing is complete you can choose what to play from the USB song library.
Accessing Your USB Song Library
1. Plug the device into your vehicle's USB port.
2. Press the MEDIA button (next to the audio display) to select USB playback.
Message Browse USB
Description and Action
This menu allows you to select and play your media files by artist, album, genre, playlist or track.
If there are no media files to access, the display indicates there is no media.
363
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
If there are media files, you have the following options:
Display
Description and Action
Play all
Play all indexed media files from your device one at a time
in numerical order.* Press the OK button to select. The first track title appears in the display.
Playlists
Access your playlists (from formats like ASX, M3U, WPL,
or MTP).* 1. Press the OK button to select. 2. Scroll to select the desired playlist, and then press the OK button.
Songs
Search for and play a specific indexed track.* 1. Press the OK button to select. 2. Scroll to select the desired track, and then press the OK button.
Artists
Sort all indexed media files by artist. The system then lists
and plays all artists and tracks alphabetically.* 1. Press the OK button to select. 2. Scroll to select the desired artist, and then press the OK button.
Albums
Sort all indexed media files by album.* 1. Press the OK button to select. 2. Scroll to select the desired album, and then press the OK button.
Genres
Sort all indexed media files by genre (category) type.* 1. Press the OK button to select. 2. Scroll to select the desired genre, and then press the OK button.
Browse USB
Browse all supported media files on your media player connected to the USB port. You can only view media files that are compatible with SYNC. (Other files are not visible.) 1. Press the OK button to select.
364
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Display
Description and Action
2. Scroll to browse indexed media files on the device, and then press the OK button.
Reset USB
Resets the USB index. After the new indexing is complete, you can choose what to play from the USB song library.
*You can use the buttons at the bottom of the audio display to jump to a certain
alphabetical category quickly. You can also use the letters on the audio system's numeric keypad to jump in the list.
Using Voice Commands
You can access and view your USB songs using voice commands. Plug the device into your vehicle's USB port.
Press the voice button and when prompted, say any of the following commands:
Accessing and Viewing USB Media
(browse | search | show) all (album | albums)
(browse | search | show) all (artist | artists)
(browse | search | show) all (genre | genres)
(browse | search | show) all (playlist | playlists)
(browse | search | show) all (song | songs | title | titles | file | files | track | tracks)
(browse | search | show) album ___
(browse | search | show) artist ___
(browse | search | show) genre ___
(browse | search | show) playlist ___
USB 2 (If Equipped)
Your vehicle may come equipped with an additional USB port. If so, USB 1 is located at the front of the vehicle at the bottom of the instrument panel. USB 2 is located inside the storage compartment of the vehicle's center console.
You can plug in an additional USB device into the second USB port.
You can access both USB devices by using voice commands.
To access a USB device press the voice button and when prompted say:
Voice command
USB 1
USB 2
Note: SYNC only supports one connected iOS (Apple) devices at a time (whichever one you plug in first). When you connect a second iOS device, the systems charges it, but does not support playback from it.
Bluetooth Devices and System Settings
You can access these menus using the audio display. See Using SYNCTM With Your Phone (page 342).
365
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Voice Commands for Audio Sources
Your voice system allows you to change audio sources with a simple voice command.
E142599
Press the voice button and when prompted say:
Voice Command
(music | audio | entertainment) [system]
Below are a few examples of voice commands you can use.
[tune [to]] AM
[tune [to]] AM1
[tune [to]] AM (autostore | AST | autoset)
[tune [to]] AM 2
Bluetooth (audio | stereo)
(disc | CD [player]) play
[tune [to]] FM
[tune [to]] FM1
[tune [to]] FM (autostore | AST | autoset)
[tune [to]] FM 2
Radio
tune [to] SAT
*
Sirius
*
(USB [stick] | iPod | MP3 [player])
Voice Command
((who's | who is) this | who plays this | (what's | what is) playing [now] | (what | which) (song | track | artist) is this | (who's | who is) playing | (what's | what is) this)
help
* If equipped.
Radio Voice Commands
If you are listening to the radio, press the voice button, and then E142599 say any of the commands in the following table.
If you are not listening to the radio, press the voice button and, after the tone, say:
Voice Command
Radio
You can then say any of the following commands.
[tune [to]] AM
[tune [to]] AM1
[tune [to]] AM (autostore | AST | autoset)
[tune [to]] AM 2
[tune [to]] (AM ___ | ___ [AM])
[tune [to]] AM preset ___
[tune [to]] AM1 preset ___
[tune [to]] FM
[tune [to]] FM1
[tune [to]] FM (autostore | AST | autoset) preset ___
366
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Voice Command
[tune [to]] FM 2
[tune [to]] (FM ___ | ___ [FM])
[tune [to]] FM preset ___
FM ___ HD ___
*
[tune [to]] FM 2 preset ___
HD ___
*
[tune [to]] preset ___ Tune help * If equipped.
Sirius Satellite Radio Voice Commands (If equipped)
E142599
To listen to Sirius satellite radio, press the voice button and, after the tone, say:
Voice Commands Sirius
When you are listening to Sirius satellite radio, you can press the voice button, and say any of the commands in the following table.
Voice Commands tune [to] SAT [tune [to]] SAT 1 [tune [to]] SAT 2 [tune [to]] SAT 3 [tune [to]] preset ___ [tune [to]] SAT 1 preset ___
Voice Commands
[tune [to]] SAT 2 preset ___
[tune [to]] SAT 3 preset ___
tune [to] [Sirius]
Help
[tune [to]] Sirius [channel] ___
You can say the channel number (0233) to listen to that
Sirius station.
CD Voice Commands
If you are listening to a CD, press the voice button, and then say E142599 any of the commands in the following table.
If you are not listening to a CD, press the voice button and, after the tone, say:
Voice Command
(disc | CD [player]) play You can then say any of the following commands. pause play [play] next track [play] previous track [play | change to] track [number] ___ repeat (track | song) [on] repeat folder [on] repeat off (shuffle | random | mix) [on | (tracks | songs) [on]]
367
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Voice Command (shuffle | random | mix) (CD [player] | disc) [on] (shuffle | random | mix) folder [on] shuffle off
SYNCTM TROUBLESHOOTING
Your SYNC system is easy to use. However, should questions arise, see the tables below.
Use the website at any time to check your phone's compatibility, register your account and set preferences as well as access a customer representative via an online chat (during certain hours). Visit www.SYNCMyRide.com, www.SYNCMyRide.ca or www.syncmaroute.ca for more information.
Phone issues
Issue
Possible cause(s)
Possible solution(s)
There is excessive background noise during a phone
call.
The audio control settings on your phone may be
affecting SYNC performance.
Review your phone's manual about audio adjustments.
During a call, I can hear the other person but they cannot hear me.
This may be a possible phone malfunction.
Try turning off the device, resetting the device, removing the device's
battery, then trying again.
SYNC is not able to download my phonebook.
This is a phone-dependent feature.
Go to the website to review your phone's compatibility.
Try turning off the device, resetting the device or removing the device's
battery, then trying again.
This may be a possible phone malfunction.
Try pushing your phonebook contacts to SYNC by using the Add Contacts feature.
Use the SYNCmyphone feature available on the
website.
The system says Phonebook Downloaded but the phonebook in SYNC is
empty or missing contacts.
This may be a limitation on your phone's capability.
Try pushing your phonebook contacts to SYNC by using the Add Contacts feature.
368
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Issue
I am having trouble connecting my phone to
SYNC.
Phone issues
Possible cause(s)
Possible solution(s)
If the missing contacts are stored on your SIM card, try moving them to the device
memory.
Remove any pictures or special ring tones associ-
ated with the missing contact.
Depending upon your phone, you may have to grant SYNC permission to access your phonebook contacts. Make
sure to confirm when prompted by your phone
during the phonebook download.
Go to the website to review your phone's compatibility.
This is a phone-dependent feature.
Try turning off the device, resetting the device or removing the device's
battery, then trying again.
Try deleting your device from SYNC, deleting SYNC from your device and trying
again.
This may be a possible phone malfunction.
Check the security and auto accept and prompt always settings relative to the SYNC Bluetooth connection on
your phone.
Update your device's firmware.
369
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Issue
Text messaging is not working on SYNC.
Phone issues
Possible cause(s)
Possible solution(s)
Turn off the Auto phonebook download setting.
This is a phone-dependent Go to the website to review
feature.
your phone's compatibility.
This may be a possible phone malfunction.
Try turning off the device, resetting the device or removing the device's
battery, then trying again.
USB and media issues
Issue
Possible cause(s)
Possible solution(s)
Try turning off the device, resetting the device, removing the device's
battery, then trying again.
I am having trouble connecting my device.
This may be a possible device malfunction.
Make sure you are using the manufacturer's cable.
Make sure you insert the USB cable correctly into the
device and the USB port.
Make sure that the device does not have an autoinstall program or active security settings.
SYNC does not recognize my device when I turn on the This is a device limitation.
car.
Make sure you are not leaving the device in your vehicle during very hot or
cold temperatures.
Bluetooth audio does not stream.
This is a phone-dependent feature.
Review the device compatibility chart on the SYNC website to confirm your phone supports the
Bluetooth audio streaming function.
370
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
USB and media issues
Issue
Possible cause(s)
Possible solution(s)
Make sure you correctly
The device is not connected.
connect the device to SYNC, and that you have pressed
play on your device.
SYNC does not recognize music that is on my device.
Your music files may not contain the correct artist, song title, album or genre
information.
Make sure that all song details are populated.
The file may be corrupted.
The song may have copyright protection, which does
not allow it to play.
Some devices require you to change the USB settings from mass storage to MTP class.
Voice command issues
Issue
Possible cause(s)
Possible solution(s)
SYNC does not understand what I am saying.
You may be using the wrong voice commands.
You may be speaking too soon or at the wrong time.
Review the phone voice commands and the media
voice commands at the beginning of their respective
sections.
After pressing the voice icon, wait until after the tone sounds and Listening appears before saying a
command. Any command spoken before this does not
register with the system.
SYNC does not understand the name of a song or artist.
You may be using the wrong voice commands.
Review the media voice commands at the beginning
of the media section.
371
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Voice command issues
Issue
Possible cause(s)
Possible solution(s)
You may be saying the name differently than the
way you saved it.
Say the song or artist exactly as listed. If you say
"Play Artist Prince", the system does not play music by Prince and the Revolution
or Prince and the New Power Generation.
Make sure you are saying the complete title, such as
"California remix featuring Jennifer Nettles".
The system may not be reading the name the same
way you are saying it.
If the song titles are in all CAPS, you have to spell them. LOLA requires you to
say "L-O-L-A".
Do not use special characters in the title. The system does not recognize them.
Review the Phone voice commands at the beginning
of the phone section.
You may be using the wrong Make sure you are saying the
voice commands.
contacts exactly as they are
listed. For example, if you
save a contact as Joe
SYNC does not understand
Wilson, say "Call Joe
or is calling the wrong
Wilson".
contact when I want to make a call.
Using the SYNC phone menu, open the phonebook
and scroll to the name
You may be saying the
SYNC is having trouble
name differently than the understanding. SYNC will
way you saved it.
read the name to you, giving
you some idea of the
pronunciation SYNC is
expecting.
372
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
Issue
Voice command issues
Possible cause(s)
Possible solution(s)
The system may not be reading the name the same
way you are saying it.
The system works better if you list full names, such as
"Joe Wilson" rather than "Joe".
Contacts in your phonebook Do not use special charac-
may be very short and
ters, such as 123 or ICE, as
similar, or they may contain the system does not recog-
special characters.
nize them.
Your phonebook contacts may be in CAPS.
If a contact is in CAPS, you have to spell it. JAKE
requires you to say "Call JA-K-E".
AppLink issues
Issue
Possible cause(s)
Possible solution(s)
AppLink Mobile Applications: When I select "Find New Apps," SYNC does not
find any applications.
An AppLink capable phone is not connected to SYNC.
Ensure you have a compatible smartphone; an Android with OS 2.3 or higher or an iPhone 3GS or newer with iOS 5.0 or higher. Addition-
ally, ensure your phone is paired and connected to
SYNC in order to find AppLink-capable apps on your device. iPhone users
must also connect to SYNC's USB port with an
Apple USB cable.
Ensure you have down-
loaded and installed the
My phone is connected, but I still cannot find any apps.
AppLink-enabled apps are not installed and running on
your mobile device.
latest version of the app from your phone's app store. Ensure the app is running on
your phone. Some apps
require you to register or
373
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
AppLink issues
Issue
Possible cause(s)
Possible solution(s)
login on the app on the phone before using them with AppLink. Also, some may have a "Ford SYNC" setting, so check the app's settings menu on the phone.
My phone is connected, my app(s) are running, but I still
cannot find any apps.
Sometime apps do not properly close and re-open their connection to SYNC,
over ignition cycles, for example.
Closing and restarting apps may help SYNC find the application if you cannot
discover it inside the vehicle. On an Android device, if
apps have an "Exit' or 'Quit' option, select that then
restart the app. If the app does not have that option,
you can also manually "Force Close" the app by going to the phone's settings menu, selecting 'Apps.' then finding the particular app and choosing 'Force stop.' Don't forget to restart the app afterwards, then select "Find New Apps" on SYNC.
On an iPhone with iOS7+, to force close an app, double tab the home button then swipe up on the app to close
it. Tab the home button again, then select the app again to restart it. After a few seconds, the app should
then appear in SYNC's Mobile App's Menu.
My Android phone is connected, my app(s) are running, I restarted them, but I still cannot find any
apps.
There is a Bluetooth bug on Reset the Bluetooth on your
some older versions of the phone by turning it off and
Android operating system then turning Bluetooth back
that may cause apps that on. If you are in your vehicle,
were found on your previous SYNC should be able to
vehicle drive to not be found automatically re-connect to
again if you have not turned your phone if you press the
off Bluetooth.
"Phone" button.
374
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM (If Equipped)
AppLink issues
Issue
Possible cause(s)
Possible solution(s)
My iPhone phone is connected, my app is running, I restarted the app but I still cannot find it on
SYNC.
The USB connection to SYNC may need to be reset.
Unplug the USB cable from the phone, wait a moment,
and plug the USB cable back in to the phone. After a few seconds, the app should
appear in SYNC's Mobile Apps Menu. If not, "Force Close" the application and
restart it.
I have an Android phone. I found and started my media app on SYNC, but there is no sound or the sound is very
low.
The bluetooth volume on the phone may be low.
Try increasing the Bluetooth volume of the device by using the device's volume control buttons which are most often found on the side of the device.
Some Android devices have Force close or uninstall the
a limited number of
apps you do not want SYNC
bluetooth ports apps can to find. If the app has a "Ford
I can only see some of the use to connect. If you have SYNC" setting, disable that
AppLink apps running on my more AppLink apps on your setting in the app's settings
phone listed in SYNC's phone than the number of
menu on the phone.
Mobile Apps Menu.
available Bluetooth ports,
you will not see all of your
apps listed in SYNC's mobile
apps menu.
SYNC System Reset
The SYNC system in your vehicle has System Reset feature that can be performed if the function of a SYNC feature is lost. This reset is intended to restore functionality and will not erase any information previously stored in the system (Such as paired devices, phonebook, call history, text messages, or user settings). To perform a System Reset,
press and hold the Seek Up (>>) button while pressing and holding the Radio Power button. Release both buttons after 2-3 seconds. Please allow a few minutes for the reset to complete. After a few minutes has passed you can resume using the SYNC
system.
375
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
GENERAL INFORMATION
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Getting to Know Your System
The SYNC 3 system allows you to interact with a variety of features using the touchscreen and voice commands. By integrating with your Bluetooth-enabled phone, the touchscreen provides easy interaction with audio, multimedia, climate control, navigation, and your phone's SYNC 3 compatible apps.
Using the Touchscreen
To operate the touchscreen, you can simply touch the item or option that you want to select. The button changes color when you select it.
The SYNC 3 layout allows you to quickly select the feature you wish to use.
E205444
376
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Item A
B C
D E
Menu Item Status Bar
Home Clock
Outside Temperature Feature Bar
Action and Description
This bar displays icons and messages pertaining to current system activities including climate settings, voice commands and phone functions such as text messages.
This button is available on the main screens. Pressing it takes you to the home screen view.
This shows the current time. You can set the clock manually or have it controlled by the vehicle's GPS location. See Settings (page 423).
This displays the current outside temperature.
You can touch any of the buttons on this bar to select a feature.
The touchscreen allows you quick access to all of your comfort, navigation, communication and entertainment options. Using the status and feature bar you can quickly select the feature you want to use.
Note: Your system is equipped with a feature that allows you to access and control audio features for 10 minutes after you switch the ignition off (and no doors open).
The Status Bar
Additional icons also display in the status bar depending on market, vehicle options and current operation. If a feature is not active, the icon does not display. Certain icons may move to the left or right depending on what options are active.
377
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
i
E249671
Callout A B
C
D E
Item
Description
Driver Temperature
This shows the temperature the driver selects through the climate control system.
Heated steering wheel
(If equipped)
When you activate the heated steering wheel option on the touch screen, this icon displays. It only displays when there is not a physical button for the heated steering wheel.
Passenger Temperature
When the passenger's temperature has been adjusted and is no longer linked to the driver's temperature, it displays here. If Dual is turned off and the temperatures are linked, the passenger's temperature does not display.
Microphone Mute This icon displays when your phone's microphone is muted. A caller cannot hear you.
Mute
This icon displays when the audio system is muted.
378
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Callout F
G H I J K L M
Item Download
Wi-Fi Wi-Fi in Range Signal Strength Text Message 911 Assist Off In-Call Bluetooth
Description
This icon appears when SYNC 3 receives a software update. Pressing the icon shows more details about the new software.
This icon appears if a Wi-Fi network is connected.
An available Wi-Fi network is within range.
This icon displays the phone signal strength and the roaming signal strength.
This icon displays when you receive a text message on your phone.
This icon displays when 911 Assist is set to off and your phone is connected to SYNC.
This icon displays when a phone call is active.
This icon displays to show an active Bluetooth connection.
Messages may also appear in the status bar to provide you with notifications. You can select the message to view the associated feature.
Feature Bar
Audio
Feature Bar Item
Climate Phone
Functions
Allows you to control the media playing in your vehicle. You can control all audio features including AM, FM and satellite radio, CDs, and media streaming over a Bluetooth device or through a USB connection.
Allows you to adjust the temperature, fan speed and airflow within the vehicle.
Allows you to make calls, receive calls, and access the phonebook of your connected device.
379
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Feature Bar Item Navigation (If equipped) Apps
Settings
Functions
Allows you to see your vehicle's location on a virtual road map, get driving directions to your destination and find points of interest along your route.
Connect and control SYNC 3 compatible apps running on your iphone or android device. Also, access built-in additional features such as SiriusXM Traffic and Travel Link (if equipped).
If your vehicle is a hybrid, plug-in hybrid, or electric this is also where your settings and power information is located.
You can customize your system with various settings for the touchscreen display, feature preferences, and how you want to interact with your vehicle.
Cleaning the Touchscreen
You can remove fingerprints with a dry, clean, soft cloth.
If dirt or fingerprints are still on the screen, apply a small amount of alcohol to the cloth and try to clean it again.
Note: Do not use detergent or any type of solvent to clean the touchscreen.
Note: Do not pour or spray alcohol onto the touchscreen.
Using Voice Recognition
Using voice commands allows you to keep your hands on the wheel and focus on what is in front of you. The system provides feedback through audible tones, prompts, questions and spoken confirmations depending on the situation and the chosen level of interaction (voice settings).
The system also asks short questions (confirmation prompts) when it is not sure of your request or when there are multiple possible responses to your request.
When using voice commands, words and icons may appear in the status bar indicating the status of the voice command session. See Using Voice Recognition (page 390).
Accessing and Adjusting Modes Through Your Vehicle Information Display (If Equipped)
Depending on your vehicle and selected options you may be able to control some of the SYNC 3 features on your information display. The features are visible the right hand display (A).
380
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
E208626
You can make the following adjustments using the information display SYNC 3 screen:
Option
Information
Entertain- Information for current audio playing.
ment
Select source.
Navigation
View current road and speed limit (if information is available).
View current route, next turn, time to your destination (depending on cluster level), distance to destination (depending on cluster level), and ability to cancel route.
If you do not have an active navigation route programed, the compass is shown.
Phone If you are not on a call, a call can be made by selecting:1
381
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Option
Information
All calls
Incoming calls Outgoing calls Missed calls
If you are on a call, the call information is displayed on the information display.
If you are receiving a call, you can accept it by selecting OK on the right-hand steering wheel controls.
1 Depending on your vehicle options, all of these choices may not display.
Use the OK and arrow buttons on the right side of your steering wheel to scroll through the available modes.
The selection menu expands and different options appear.
· Press the up and down arrows to scroll through the modes.
· Press the right arrow to enter the mode, use the left arrow to exit the mode.
· Press the up and down arrows to make adjustments within the chosen mode.
· Press OK to confirm your selection.
Note: If your vehicle is not equipped with navigation, compass appears in the display instead of navigation. If you press the right arrow to go into the compass menu, you can see the compass graphic. The compass displays the direction in which the vehicle is traveling, not true direction (for example, if the vehicle is traveling west, the middle of the compass graphic displays west; north displays to the left of west though its true direction is to the right of west).
Using the Steering Wheel Controls
Depending on your vehicle and option package, you can use different controls on your steering wheel to interact with the touchscreen system in different ways.
VOL: Control the volume of audio output.
Mute: Mute the audio output.
Voice: Press to start a voice session. Press again to stop the voice prompt and immediately begin speaking. Press and hold to end a voice session.
SEEK NEXT:
· While in radio mode, press to seek between memory presets.
· While in USB, Bluetooth Audio or CD mode, press to seek between songs or press and hold to fast seek.
SEEK PREVIOUS:
· While in radio mode, press to seek between memory presets.
· While in USB, Bluetooth Audio or CD mode, press to seek between songs or press and hold to fast seek.
PHONE ACCEPT: Press to answer a call or switch between calls.
PHONE REJECT: Press to end a call or reject an incoming call.
Note: On some models, SEEK NEXT may be combined with PHONE REJECT and SEEK PREVIOUS may be combined with PHONE ACCEPT.
M: Touch the control repeatedly to switch between media sources (modes).
See Steering Wheel (page 70).
Using Your Bezel Controls
Depending on your vehicle and option package, you may also have these controls on your instrument panel:
382
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
· Power: Switch the audio system on and off.
· VOL: Control the volume of playing audio.
· Seek and Tune: Use as you normally would in audio modes.
· Eject: Eject a CD from the audio system.
· SOURCE or MEDIA: Press repeatedly to advance through available media modes.
· SOUND: Press to access the Sound menu where you can adjust sound and other audio settings.
· 1-6: Press and hold to store or press to select an AM, FM or SIRIUS memory preset. See Audio System (page 321).
· DISP: Switch the display on or off. You can also touch the screen to switch the display back on.
· Temperature, fan and climate control buttons: Control the temperature, fan speed or settings of the climate control system. See Climate Control (page 107).
911 Assist
WARNINGS
Unless the 911 Assist setting is set on before a crash, the system will not dial for help which could delay response time, potentially increasing the risk of serious injury or death after a crash.
Do not wait for 911 Assist to make an emergency call if you can do it yourself. Dial emergency services immediately to avoid delayed response time which could increase the risk of serious injury or death after a crash. If you do not hear 911 Assist within five seconds of the crash, the system or phone may be damaged or non-functional.
WARNINGS Always place your phone in a secure location in your vehicle so it does not become a projectile or get damaged in a crash. Failure to do so may cause serious injury to someone or damage the phone which could prevent 911 Assist from working properly.
Note: The SYNC 911 Assist feature must be set on before the incident.
Note: The SYNC 911 Assist feature only operates in the U.S., Canada or in a territory in which 911 is the emergency number.
Note: Before setting this feature on, make sure that you read the 911 Assist Privacy Notice later in this section for important information.
Note: If any user sets 911 Assist to on or off, that setting applies for all paired phones. If 911 Assist is switched off and the phone is connected to SYNC, an icon displays on the status bar.
Note: Every phone operates differently. While SYNC 911 Assist works with most cellular phones, some may have trouble using this feature.
If a crash deploys an airbag (excluding knee airbags and rear inflatable safety belts [if equipped]) or activates the fuel pump shut-off, your SYNC-equipped vehicle may be able to contact emergency services by dialing 911 through a paired and connected Bluetooth-enabled phone. You can learn more about the 911 Assist feature, by visiting:
Website
www.owner.ford.com www.syncmyride.ca
383
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Website
www.syncmaroute.ca
For important information about airbag deployment and the fuel pump shut-off please see the Supplementary Restrains and Roadside Emergencies sections of your owner manual.
To switch 911 Assist on and off please view the settings information. See Settings (page 423).
To make sure that 911 Assist works correctly:
· SYNC must be powered and working properly at the time of the incident and throughout feature activation and use.
· The 911 Assist feature must be set on before the incident.
· You must pair and connect a Bluetooth-enabled and compatible cell phone to SYNC.
· A connected Bluetooth-enabled phone must have the ability to make and maintain an outgoing call at the time of the incident.
· A connected Bluetooth-enabled phone must have adequate network coverage, battery power and signal strength.
· The vehicle must have battery power and be located in the U.S., Canada or in a territory in which 911 is the emergency number.
In the Event of a Crash
Not all crashes will deploy an airbag or activate the fuel pump shut-off (the triggers for 911 Assist). If a connected cell phone sustains damage or loses its connection to SYNC during a crash, SYNC will search for and try to connect to a previously paired cell phone; SYNC will then attempt to call the emergency services.
Before making the call:
· SYNC provides a short window of time (about 10 seconds) to cancel the call. If you fail to cancel the call, SYNC attempts to dial 911.
· SYNC says the following, or a similar message: "SYNC will attempt to call 911, to cancel the call, press Cancel on your screen or press and hold the phone button on your steering wheel."
If you do not cancel the call, and SYNC makes a successful call, a pre-recorded message plays for the 911 operator, and then the occupant(s) in your vehicle is able to talk with the operator. Be prepared to provide your name, phone number and location immediately, because not all 911 systems are capable of receiving this information electronically.
911 Assist May Not Work If
· Your cellular phone or 911 Assist hardware sustains damage in a crash.
· The vehicle's battery or the SYNC system has no power.
· The phone(s) thrown from your vehicle are the ones paired and connected to the system.
911 Assist Privacy Notice
When you switch on 911 Assist, it may disclose to emergency services that your vehicle has been in a crash involving the deployment of an airbag or activation of the fuel pump shut-off. Certain versions or updates to 911 Assist may also be capable of electronically or verbally disclosing to 911 operators your vehicle location or other details about your vehicle or crash to assist 911 operators to provide the most appropriate emergency services. If you do not want to disclose this information, do not switch the feature on.
384
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Safety Information
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
· Do not attempt to service or repair the system. Have an authorized dealer check your vehicle.
· Do not operate playing devices if the power cords or cables are broken, split or damaged. Place cords and cables out of the way, so they do not interfere with the operation of pedals, seats, compartments or safe driving abilities.
· Do not leave playing devices in your vehicle during extreme conditions as it could cause them damage. See your device's user guide for further information.
· For your safety, some SYNC 3 functions are speed-dependent. Their use is limited to when your vehicle is traveling at speeds under 3 mph (5 km/h). Make sure that you review your device's manual before using it with SYNC 3.
Speed-restricted Features
Some features of this system may be too difficult to use while your vehicle is moving so they are restricted from use unless your vehicle is stationary.
· Screens crowded with information, such as Point of Interest reviews and ratings, SiriusXM Traffic and Travel Link sports scores, movie times or ski conditions.
· Any action that requires you to use a keyboard is restricted, such as entering a navigation destination or editing information.
· All lists are limited so the user can view fewer entries (such as phone contacts or recent phone call entries).
See the following table for more specific examples.
Cellular Phone System Functionality
Restricted features
Pairing a Bluetooth phone.
Browsing of list entries is limited for phone contacts and recent phone calls.
Editing the keypad code.
Enabling Valet Mode.
Editing settings while the rear view camera or active park assist are active.
385
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Wi-Fi
Text Messages Navigation
Restricted features Editing Wi-Fi settings. Editing the list of wireless networks. Connecting to a new Wi-Fi network. Viewing received text messages. Using the keyboard to enter a destination. Adding or editing Navigation Favorites entries or Avoid Areas.
Creating a SYNC Owner Account
Why do I need a SYNC owner account? · Essential for keeping up with the latest
software and connected features. · Access to customer support for any
questions you may have. · Maintain account permissions. Visit the website to sign up and register.
Website
www.owner.ford.com www.syncmyride.ca www.syncmaroute.ca
Updating Your System
You can choose to download the update onto a USB drive or use Wi-Fi to deliver automatic updates.
USB Updates
To use the USB update you need to log into your owner account and visit the SYNC software update page.
Website
www.owner.ford.com www.syncmyride.ca
Website
www.syncmaroute.ca
The website notifies you if an update is available. You can then select to download the update.
You will need an empty USB drive. Please check the website for minimum requirements. Once you have inserted the USB drive into your computer, choose to start the download. Follow the instructions provided to download the files to the USB drive.
The installation of most files occurs in the background, and does not interrupt your use of the system. Navigation updates cannot be installed in the background, because the files are too large.
To install the update in your vehicle, remove anything that is plugged in the USB ports on the media hub and plug in the USB drive containing the update. When the USB drive is plugged in, the installation should begin immediately. After a successful installation, the update is available the next time the vehicle is started.
Please reference the website for any further actions.
386
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Updating Over Wi-Fi
To update your System over Wi-Fi your vehicle must be connected to a Wi-Fi access point. Data rates may apply.
To connect your system to Wi-Fi, select:
Menu Item
Settings Wi-Fi
Available Wi-Fi Networks
You can then select your Wi-Fi network. You may have to enter the security code if the network is secured. The system confirms when it has connected to the network.
You must also give the system permission to update automatically. Upon vehicle delivery, the System asks you if you would like to use the automatic update feature. If you agree to automatic updates, you can press OK to confirm. If this selection does not appear upon vehicle delivery you can access it through the General Settings. See Settings (page 423). You can also perform a master reset. See SYNCTM 3 Troubleshooting (page 437).
If you would like to switch this feature on later, select:
Menu Item
Settings
General
Automatic System Updates
From this menu, you can enable automatic updates. If you have not done so already, the system prompts you to set up a Wi-Fi connection when you enable this feature.
When the system is connected via Wi-Fi and automatic updates are enabled, your system checks for software updates periodically. If a new version is available, it downloads at that time. Software downloads can take place for up to 30 minutes after you have switched your vehicle off. The updates do not interrupt the normal use of your SYNC 3 system. If a download does not complete for any reason, the download continues where it left off at the next Wi-Fi connected opportunity. Upon activation of an update, a banner displays on the touchscreen indicating the system update. Select the icon to see more detail. This icon displays for two ignition cycles.
To switch this feature off:
Menu Item
Settings
General
Automatic System Updates
In this menu selection, you can change the selection for automatic updates to OFF.
387
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Support
The SYNC support team is available to help you with any questions you are not able to answer on your own.
Monday-Saturday, 8:30am-8:00pm EST.
United States: 1-800-392-3673.
Canada: 1-800-565-3673.
Times are subject to change due to holidays.
Privacy Information
When you connect a cellular phone to SYNC 3, the system creates a profile within your vehicle that links to that cellular phone. This profile helps in offering you more cellular features and operating more efficiently. Among other things, this profile may contain data about your cellular phone book, text messages (read and unread), and call history, including history of calls when your cell phone was not connected to the system. In addition, if you connect a media device, the system creates and retains an index of supported
media content. The system also records a short diagnostic log of approximately 10 minutes of all recent system activity. The log profile and other system data may be used to improve the system and help diagnose any problems that may occur.
The cellular profile, media device index, and diagnostic log remain in your vehicle unless you delete them and are generally accessible only in your vehicle when the cellular phone or media player is connected.
If you no longer plan to use the system or your vehicle, we recommend you perform a Master Reset to erase all stored information. You can find more information about the Master Reset in General Settings. See Settings (page 423). System data cannot be accessed without special equipment and access to your vehicle's SYNC 3 module. Ford Motor Company, Ford of Canada and The Lincoln Motor Company do not access the system data for any purpose other than as described absent consent, a court order, or where required by law enforcement, other government authorities, or other third parties acting with lawful authority. Other parties may seek to access the information independently of Ford Motor Company, Ford of Canada and The Lincoln Motor Company.
HOME SCREEN
388
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
E207616
Item
Tile
A Audio
B Phone
C Navigation *
* If equipped.
Home screen display
Shows the active media source. If your vehicle does not have navigation, this space contains the compass.
The name of the connected phone appears on the screen. The status of the phone features also appear. This includes signal strength, battery charge, 911 assist setting state (On or Off), text messaging and roaming.
This map displays your current location or current route in real time. When you have navigation active, you also see the next turn and the length of time and distance to your destination. If your vehicle does not have navigation, this space contains the audio information.
389
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
You can touch any of the feature displays to access that feature.
Anytime you select the home button, the system returns you to this screen.
USING VOICE RECOGNITION
The SYNC 3 system allows you to use voice commands, to control features like audio and climate controls. By using voice commands, you can keep your hands on the wheel and your eyes on the road.
You can access each feature controlled by SYNC 3 through a variety of commands.
To activate the SYNC 3 voice commands push the voice E142599 button on the steering wheel and wait for the prompt.
___ is a dynamic listing, meaning that it can be the name of anything, such as artist, the name of contact or number. The context and the description of the command tell you what to say for this dynamic option.
There are some commands that work for every feature, these commands are:
Voice Command
Action and Description
Main Menu
Brings you to the main menu.
Go back
Returns you to the previous screen.
Cancel
Ends the voice session.
List of Commands Gives you a list of possible voice commands.
___ List of Commands You can name any feature and the system gives a list of commands available for the feature. For example, you could say:
Phone List of Commands
Navigation List of Commands
Next Page
You can use this command to view the next page of options on any screen where multiple pages of choices are given.
Previous Page
You can use this command to view the previous page of options on any screen where multiple pages of choices are given.
Help
Gives you available commands you can use on the current screen.
Included here are some of the most popular commands for each SYNC 3 feature.
Audio Voice Commands
___ is a dynamic listing, meaning that for audio voice commands it can be the name of a Sirius channel or a channel number, a radio frequency number, or the name of an artist, album, song or a genre.
390
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
To control the media features, press the voice button and when prompted, say:
Voice command
Description
Sirius Channel ___
1 You can say the Sirius channel name or number such as "Sirius channel 16".
You can also turn to a Sirius channel by saying the channel's name, such as "The Pulse".
AM ___ FM ___
Allows you to tune to a specific FM or AM frequency such as "FM 88.7" or "AM 1580".
FM ___ HD ___
1 Allows you to tune to a specific HD frequency such as "FM 88.7 HD 1".
Bluetooth Audio
Allows you to listen to music on your Bluetooth connected device.
USB
Allows you to listen to music on your USB connected device.
Play Genre ___ Play Playlist ___ Play Artist ___ Play Album ___
For USB audio only, you can say the name of an artist, album, song or a genre to listen to that selection. Your system must finish indexing before this option is available. For example, you could say "Play artist, The Beatles" or "Play song, Penny Lane".
Play Podcast ___
Play Song ___
Play Audiobook ___
Browse ___
For USB audio only, you can say the name of an artist, album, or a genre to browse by that selection. Your system must finish indexing before this option is available. For example you can say "Browse The Beatles" or "Browse folk".
1 This option may not be available in all markets or may require a subscription.
Climate Voice Commands
You can control the temperature of the vehicle using voice commands.
___ is a dynamic listing, meaning that for climate voice commands it can be the desired degrees for the temperature setting.
391
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
To adjust the temperature, say: Voice command
Set Temperature ___
Description
Adjust the temperature between 6085°F (15.529.5°C).
Phone Voice Commands
Pairing a Phone
You can use voice commands to connect your Bluetooth enabled phone to the system.
To pair your phone, press the voice button and when prompted, say:
Voice command
Description
Pair Phone
Follow the on-screen instructions to complete the pairing process. See Settings (page 423).
Making Calls
___ is a dynamic listing, meaning that for phone voice commands it can be the name of the contact you wish to call or the digits you want to dial.
Press the voice button and say a command similar to the following:
Voice command
Description
Call ___ Call ___ at ___
Allows you to call a specific contact from your phonebook such as "Call Jenny".
Allows you to call a specific contact from your phonebook at a specific location such as "Call Jenny at Home".
Dial ___
Allows you to dial a specific number such as "Dial 867-5309".
Please make sure that you are saying the contact name exactly as it appears in your contact list.
392
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Once you have provided the digits of the phone number, you can say the following commands:
Voice Command
Description
<0-9>
If you did not enter the full number with the first command, you can continue saying the number.
Dial
Tells SYNC 3 to make the phone call.
Delete
Tells SYNC 3 to erase the last block of digits you state.
Clear
Tells SYNC 3 to erase the entire number.
Text Message Voice Commands
To access text message options, press the voice button and say:
Voice command
Description
Listen to Message Listen to text message ___
Reply to Message
You can say the number of the message you would like to hear.
Navigation Voice Commands (If
Equipped)
Setting a Destination
You can use any of the following commands to set a destination or find a point of interest.
___ is a dynamic listing, meaning that for navigation voice commands it can be a POI category or a major brand name, where major brand name is a chain with more than 20 locations
You can find an address, a point of interest (POI), or search for points of interest by category:
Voice command Find an Address Find a ___ Find a POI
Description
Allows you to enter the address search functionality. You can also search for an address in a specific state or province.
State the name of the POI category or major brand name you would like to search for such as "Find restaurants".
Allows you to enter the POI search functionality.
393
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Voice command
Description
Find an Intersection Allows you to enter the intersection search functionality.
Find the Nearest <POI Category>
State the name of a POI category or major brand name you would like to search for.
Show Previous Destinations
Allows you to see a list of your previous destinations.
Show Favorites
Allows you to see a list of your favorite destinations.
Drive Home
Allows you to route to your home address.
Drive to Work
Allows you to route to your work address.
In addition, you can say these commands when a route is active:
Voice command
Description
Cancel Route
Cancels the current route.
Detour
Allows you to select an alternate route.
Repeat Instruction Repeats the last guidance prompt.
Show Route
Displays the active route.
Route Summary
Displays the list of upcoming maneuvers.
Where Am I
Provides current location.
Zoom in
Allows you to zoom in on the map.
Zoom out
Allows you to zoom out from the map.
Mobile App Voice Commands (If Equipped)
The following voice commands are always available:
Voice command
Description
Mobile Apps
SYNC 3 will prompt you to say the name of an app to start it on SYNC 3.
List Mobile Apps SYNC 3 will list all of the currently available Mobile Apps.
Find Mobile Apps SYNC 3 will search and connect to compatible app(s) running on your mobile device.
394
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
There are also voice commands that you can use when app(s) are connected to SYNC 3:
Voice command
Description
Say the name of an At any time, you can say the name of a mobile app to start the
app
mobile app on SYNC 3.
Say the name of an SYNC 3 will list the available voice commands for the specified app, followed by app if the app is running on SYNC 3. help
SiriusXM Traffic and Travel Link Voice Commands (If Equipped)
SiriusXM Traffic and Travel Link may not be available in all markets. Activation and a subscription are required.
You can say the following commands to access SiriusXM Traffic and Travel Link:
Voice command
Description
Show Traffic
Displays a list of traffic incidents.
Show Weather Map Displays the current weather map.
Show Fuel Prices Displays a list of fuel prices.
Show 5 Day Fore- Displays the 5 day weather forecast. cast
Help
Voice Settings Commands
You can say the following commands to access the voice settings:
Voice command
Description
Voice Settings
Allows you to enter the voice settings functionality.
Interaction Mode Standard
Interaction Mode Advanced
Call Confirmation On
Sets standard prompting with longer prompts. Sets advanced prompting with shorter prompts. Allows the system to confirm before making a phone call.
395
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Voice command
Description
Call Confirmation Off The system does not confirm before placing a call.
Voice Command Lists On The system displays a short list of available commands.
Voice Command Lists Off The system does not display the list of commands.
You can use the volume control to adjust the volume of the system voice prompts. While prompt is active, adjust the volume control up or down to your desired setting.
Note: Depending on the current climate control settings, the fan speed may automatically go down while issuing voice commands or while making and receiving phone calls via SYNC to reduce the amount of background noise in the vehicle. The fan speed will automatically return to normal operation once the voice session ends. You can adjust the fan speed during a voice session, simply press the fan buttons (or turn the fan knob) to increase or decrease the fan speed to the setting you prefer.
To disable this automatic fan speed reduction feature during voice sessions, press and hold the climate control AC and Recirculated air buttons simultaneously, release and then increase fan speed within 2 seconds. To re-enable this feature, repeat the above sequence.
ENTERTAINMENT
396
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
E207617
Message Message and description
A
Sources
B
Direct Tune
C
Presets
You can access these options using the touchscreen or voice commands.
Sources
Press this button to select the source of media you want to listen to.
AM FM SIRIUS CD USB
Menu item
* The name of the USB that is plugged in displays here.
397
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu item
Bluetooth Stereo
Apps
If you have SYNC 3 compatible apps on your connected smart phone, they display here as individual source selections.
* This feature may not be available in all markets and requires an active subscription.
AM/FM Radio
Tuning a Station You can use the tune or seek controls on the radio bezel to select a station.
To tune a station using the touchscreen, select:
Menu item
Direct Tune
Once you have entered the station's call numbers, you can select:
Menu item
Action and description
Enter
Press to begin playing the station you have entered.
Cancel
Press to exit without changing the station.
A pop up appears, allowing you to type in the frequency of a station. You can only enter a valid station for the source you are currently listening to.
You can press the backspace button to delete the previously entered number.
Presets
To set a new preset, tune to the station and then press and hold one of the memory preset buttons. The audio mutes briefly while the system saves the station and then returns.
There are two preset banks available for AM and three banks for FM. To access additional presets, tap the preset button. The indicator on the preset button shows which bank of presets you are currently viewing.
SiriusXM® Satellite Radio (If Activated)
Note: This feature may not be available in all markets and requires an active subscription.
398
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
E234451
SiriusXM satellite radio is a subscription-based satellite radio service that broadcasts a variety of music, sports, news, weather, traffic and entertainment programming. Your factory-installed SiriusXM satellite radio system includes hardware and a limited subscription term that begins on the date of sale or lease of your vehicle. See an authorized dealer for availability.
For more information on extended subscription terms (a service fee is required), the online media player and a list of SiriusXM satellite radio channels, and other features, please visit www.siriusxm.com in the United States, www.siriusxm.ca in Canada, or call SiriusXM at 1-888-539-7474.
Note: SiriusXM reserves the unrestricted right to change, rearrange, add or delete programming. This includes canceling, moving or adding particular channels, and its prices, at any time, with or without notice to you. Ford Motor Company shall not be responsible for any such programming changes.
Note: This receiver includes the eCos real-time operating system. eCos is published under the eCos License.
The following buttons are available for SiriusXM:
Menu item
Action and description
Browse
Touch this button to see a list of available stations.
Direct Tune
A pop-up appears, allowing you to type in the call numbers of a station. Once you enter the stations call numbers, you can select:
Enter
The system tunes to the station you select.
Cancel
You exit the pop-up and the current station continues to play.
You can press the backspace button to delete the previous number.
399
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu item Replay
ALERT
Action and description
Replay audio on the current channel. You can replay approximately 45 minutes of audio as long as you remain tuned to the current station. Changing stations erases the previous audio.
Live
When you are in replay mode, you are not
able to select a different preset until you
return to live audio. Pressing this button
returns you to the live broadcast.
Save the current song, artist, or team as a favorite. The system alerts you when it plays again on any channel. Selecting this button allows you to enable and edit alerts. See Settings (page 423).
Memory Presets
To set a preset, tune to the station then press and hold one of the memory preset buttons. The audio mutes briefly while the system saves the station and returns once the station is stored.
There are three preset banks available for SiriusXM. To access additional presets, tap the preset button. The indicator on the preset button shows which bank of presets you are currently viewing.
Satellite Radio Electronic Serial Number (ESN)
You need your ESN to activate, modify or track your satellite radio account. See Settings (page 423).
SiriusXM Satellite Radio Reception Factors and Troubleshooting
Antenna obstructions
Terrain
Station overload
Satellite radio signal interference
Potential reception issues
For optimal reception performance, keep the antenna clear of snow and ice build-up and keep luggage and other materials as far away from the antenna as possible.
Hills, mountains, tall buildings, bridges, tunnels, freeway overpasses, parking garages, dense tree foliage and thunderstorms can interfere with your reception.
When you pass a ground-based broadcast-repeating tower, a stronger signal may overtake a weaker one and the audio system may mute.
Your display may show ACQUIRING... to indicate the interference and the audio system may mute.
400
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Troubleshooting tips
Message
Cause
Action
Acquiring Signal
Radio requires more than two No action required. This
seconds to produce audio for message should disappear
the selected channel.
shortly.
Satellite antenna fault There is an internal module or system failure present.
SIRIUS system failure
If this message does not clear shortly, or with an ignition key cycle, your receiver may have a fault. See an authorized dealer for service.
Invalid Channel
The channel is no longer avail- Tune to another channel or
able.
choose another preset.
Unsubscribed Channel Your subscription does not include this channel.
Contact SiriusXM at 1-888539-7474 to subscribe to the channel, or tune to another channel.
Satellite acquiring signal...
The signal is lost from the Siri- The signal is blocked. When
usXM satellite or SiriusXM
you move into an open area,
tower to your vehicle antenna. the signal should return.
Updating...
Update of channel programming in progress.
No action required. The process may take up to three minutes.
Questions? Call 1888-539-7474
Your satellite service is no longer available.
Contact SiriusXM at 1-888539-7474 to resolve subscription issues.
None found. Check channel guide.
All the channels in the selected Use the channel guide to turn
category are either skipped or off the Lock or Skip function on
locked.
that station.
SIRIUS Subscription updated
SiriusXM has updated the channels available for your vehicle.
No action required.
HD RadioTM Information (If Available)
Note: This feature may not be available in all markets.
To activate HD radio, please see the Radio Settings in the Settings Chapter. See Settings (page 423).
Note: HD Radio broadcasts are not available in all markets.
401
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
HD Radio technology is the digital evolution of analog AM/FM radio. Your system has a special receiver that allows it to receive digital broadcasts (where available) in addition to the analog broadcasts, it already receives. Digital broadcasts provide a better sound quality than analog broadcasts with free, crystal-clear audio and no static or distortion. For more information, and a guide to available stations and programming, please visit:
Website
www.hdradio.com
When HD Radio is on and you tune to a station broadcasting HD Radio technology, you may notice the following indicators on your screen:
The HD logo is grey when acquiring a digital station, and then changes to orange when digital audio is playing. When this logo is available, you may also see Title and Artist fields on-screen.
The multicast indicator appears in FM mode (only) if the current station is broadcasting multiple digital broadcasts. The highlighted numbers signify available digital channels where new or different content is available. HD1 signifies the main programming status and is available in analog and digital broadcasts. Other multicast stations (HD2 through HD7) are only available digitally.
Note: There is also an additional feature for stations that have more than 1 HD multicast (For example, HD1 or HD2). The HD logo and Radio text appears as a button. Pressing this button allows you to cycle through all of the HD stations on that specific frequency. For example, if you are on 101.1 and it has HD1, HD2, HD3, pressing the button repeatedly causes the radio to cycle through the HD stations in a cyclic increasing order.
E142616
When HD Radio broadcasts are active, you can access the following functions:
Message
Action and description
Presets
Allows you to save an active channel as a memory preset. Touch and hold a memory preset slot until the sound returns. There is a brief mute while the radio saves the station. Sound returns when the channel saves. When switching to an HD2 or HD3 memory preset, the sound mutes before the digital audio plays, because the system has to reacquire the digital signal.
Note: As with any station you save, you cannot access the saved station if your vehicle is outside the station's reception area.
402
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
HD Radio Reception and Station Troubleshooting
Reception area Station blending
Potential reception issues
If you are listening to a multicast station and you are on the fringe of the reception area, the station may mute due to weak signal strength.
If you are listening to HD1, the system changes back to the analog broadcast until the digital broadcast is available again. However, if you are listening to any of the possible HD2-HD7 multicast channels, the station mutes and stays muted unless it is able to connect to the digital signal again.
When the system first receives a station (aside from HD2HD7 multicast stations), it first plays the station in the analog version. Once the receiver verifies the station is an HD Radio station, it shifts to the digital version. Depending on the station quality, you may hear a slight sound change when the station changes from analog to digital. Blending is the shift from analog to digital sound or digital back to analog sound.
In order to provide the best possible experience, use the contact form to report any station issues found while listening to a station broadcasting with HD Radio technology. Independent entities own and operate each station. These stations are responsible for ensuring all audio streams and data fields are accurate.
Potential station issues
Issues
Cause
Action
Echo, stutter, skip or This is poor time alignment by No action required. This is a
repeat in audio.
the radio broadcaster.
broadcast issue.
Increase or decrease in
audio volume.
Sound fading or blending in and out.
The radio is shifting between analog and digital audio.
No action required. The reception issue may clear up as you continue to drive.
There is an audio mute The digital multicast is not
No action required. This is
delay when selecting available until the HD Radio normal behavior. Wait until the
HD2 or HD3, multicast broadcast is decoded. Once audio is available.
preset or Direct Tune. decoded, the audio is available.
403
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Potential station issues
Issues
Cause
Action
Cannot access HD2 or The previously stored multicast No action required. The station
HD3 multicast channel preset or direct tune is not
is not available in your current
when recalling a preset available in your current recep- location.
or from a direct tune. tion area.
Text information does Data service issue by the radio Fill out the station issue form.
not match currently broadcaster.
*
playing audio.
There is no text
Data service issue by the radio Fill out the station issue form.
information shown for broadcaster.
*
currently selected
frequency.
HD Radio Technology manufactured under license from DTS Inc. U.S. and foreign patents. HD Radio and the HD and HD Radio logos are proprietary trademarks of DTS Inc. Ford Motor Company and DTS Inc. are not responsible for the content sent using HD Radio technology. Content may be changed, added or deleted at any time at the station owner's discretion.
* You can find the form here:
Website
http://hdradio.com/stations/feedback
CD Once you select this option, the system returns you to the main audio screen. The current audio information appears on the screen.
The following buttons are also available:
Button
Function
Browse
You can use the browse button to select a track.
Repeat
Select this button and a small number one displays to indicate the track is set to repeat. For MP3 CDs, this button allows you to toggle through repeat off, repeat one track (a small number one displays), and repeat current folder (a small folder displays).
Shuffle
Select the shuffle symbol to have the audio on the disk play in random order.
You can use the forward, reverse, pause or play buttons to control the audio playback.
404
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Bluetooth Stereo or USB Bluetooth Stereo and USB allow you to
access media that you store on your Bluetooth device or USB device such as music, audio books or podcasts.
The following buttons are available for Bluetooth and USB:
Button
Function
Repeat
Pressing the repeat button toggles the repeat setting through three modes: repeat off (button not highlighted), repeat all (button highlighted) and repeat track (button highlighted with a small number one).
Shuffle
Play the tracks in random order.
You can use the forward, reverse, pause or play buttons to control the audio playback.
To get more information about the currently playing track, press the cover art or Info button.
For some devices, SYNC 3 is able to provide 30-second skip buttons when you listen to audio books or podcasts. These buttons allow you to skip forward or backward within a track.
While playing audio from a USB device you can look for certain music by selecting the following:
Browse New Search
Button
Function
If available, displays the list of tracks in the Now Playing playlist.
This option, which is available under browse, allows you to play all tracks or to filter the available media into one of the below categories.
Play All
Playlists
Artist
Albums
Songs
Genres
Podcasts
Audio books
405
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
A-Z Jump
Button
Explore Device
Function
Composers
This button allows you to choose a specific letter to view within the category you are browsing.
If available, this allows you to browse the folders and files on your USB device.
USB Ports
E211463
The USB ports are in the center console or behind a small access door in the instrument panel. This feature allows you to plug in USB media devices, memory sticks, flash drives or thumb drives, and charge devices if they support this feature. Select this option to play audio from your USB device. Apps The system supports the use of certain audio apps such as Pandora or iHeartRadio through a USB or Bluetooth enabled device. Each app gives you different on-screen options depending on the app's content. See Apps (page 420).
Supported Media Players, Formats and Metadata Information
The system is capable of hosting nearly any digital media player, including iPod, iPhone, and most USB drives.
Supported audio formats include MP3, WMA, WAV, AAC, and FLAC.
Supported audio file extensions include MP3, WMA, WAV, M4A, M4B, AAC, and FLAC.
Supported USB file systems include: FAT, exFAT, and NTFS.
SYNC 3 is also able to organize the media from your USB device by metadata tags. Metadata tags, which are descriptive software identifiers embedded in the media files, provide information about the file.
If your indexed media files contain no information embedded in these metadata tags, SYNC 3 may classify the empty metadata tags as unknown.
SYNC 3 is capable of indexing up to 50,000 songs per USB device, for up to 10 devices.
406
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
PHONE
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Hands-free calling is one of the main features of the system. Once you pair your cell phone, you can access many options using the touchscreen or voice commands. While the system supports a variety of features, many are dependent on your cell phone's functionality.
Pairing Your Cell Phone for the First Time
Pair your Bluetooth enabled phone with the system before using the functions in hands-free mode.
Switch on Bluetooth on your device to begin pairing. See your phone's manual if necessary.
To add a phone, select:
Add Phone
Menu Item
1. Follow the on-screen instructions.
2. A prompt alerts you to search for the system on your phone.
3. Select your vehicle's make and model as it displays on your phone.
4. Confirm that the six-digit number appearing on your phone matches the six-digit number on the touchscreen.
5. The touchscreen indicates when the pairing is successful.
6. Your phone may prompt you to give the system permission to access information. To check your phone's compatibility, see your phone's manual or visit the website.
Alternatively, to add a phone, select:
Menu Item
Add Phone
Then select:
Discover Other Bluetooth Devices
1. Follow the on-screen instructions. 2. Select your phone's name when it
appears on the touchscreen. 3. Confirm that the six-digit number
appearing on your phone matches the six-digit number on the touchscreen. 4. The touchscreen indicates when the pairing is successful. 5. Your phone may prompt you to give the system permission to access information. To check your phone's compatibility, see your phone's manual or visit the website.
At a minimum, most cell phones with Bluetooth wireless technology support the following functions: · Answering an incoming call. · Ending a call. · Dialing a number. · Call waiting notification. · Caller identification.
407
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features.
To check your phone's compatibility, see your phone's manual or visit the website:
Websites
owner.ford.com
Websites
www.syncmyride.ca www.syncmaroute.ca
Phone Menu This menu becomes available after pairing a phone.
G
E251249
Item A
Menu Item
Action and Description
Recent Call List
Displays your recent calls. You can place a call by selecting an entry from this list.
408
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Item
B
C D E F G
Menu Item
Action and Description
You can also sort the calls by selecting the drop down menu at the top of the screen. You can choose:
All
Incoming
Outgoing
Missed
Contacts All of your contacts from your phone display in alphabetical order.
A-Z Jump
Selecting this button allows you to choose a specific letter to view.
Phone Settings
Displays the name of your phone and takes you to the phone settings options. From this menu, you can pair subsequent devices, set ring tones and alerts.
Change Device
Gives you access to the list of paired or connected Bluetooth devices allowing you to change or select a device.
Text
Displays all recent text messages.
Messages
Phone Keypad
Use this keypad to dial in a phone number. Use the backspace button to delete numbers.
Call
Press this button to begin a
call.
Do Not Disturb
Touch this button to reject all incoming calls automatically. Text message notifications do not display on the screen. All ringtones and alerts are set to silent.
Users with phones having voice services may see a button to access the feature. For example, iPhone users see a Siri button. A press and hold of the voice button on the steering wheel also accesses this feature.
Making Calls
There are many ways to make calls from the SYNC 3 system, including using voice commands. See Using Voice Recognition (page 390). You can use the touchscreen to place calls as well.
409
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
To call a number in your contacts, select:
Menu Item Action and Description
Contacts
You can then select the name of the contact you want to call. Any numbers stored for that contact display along with any stored contact photos. You can then select the number that you want to call. The system begins the call.
To call a number from your recent calls, select:
Menu Item Action and Description
Recent Call You can then select an
List
entry that you want to call.
The system begins the call.
To call a number that is not stored in your phone, select:
Menu Item Action and Description
Phone Keypad
Select the digits of the number you wish to call.
Call
The system begins the call.
Pressing the backspace button deletes the last digit you typed.
Receiving Calls
During an incoming call, an audible tone sounds. Caller information appears in the display if it is available.
To accept the call, select:
Menu Item
Accept Note: You can also accept the call by pressing the phone button on the steering wheel.
To reject the call, select:
Menu Item
Reject Note: You can also reject the call by pressing the phone button on the steering wheel.
Ignore the call by doing nothing. SYNC 3 logs it as a missed call.
During a Phone Call
During a phone call, the contacts name and number display on the screen along with the call duration. The phone status items are also visible: · Signal Strength. · Battery. · 911 Assist (United States and Canada
only). See Settings (page 423). You can select any of the following during an active phone call:
410
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Item End Call
Keypad Mute
Immediately end a phone call. You can also press the button on the steering wheel.
Press this to access the phone keypad.
You can switch the microphone off so the caller does not hear you.
Item Privacy
Transfer the call to the cell phone or back to SYNC 3.
Text Messaging
Note: Downloading and sending text messages using Bluetooth are cell phone-dependent features.
Note: Certain features in text messaging are speed-dependent and not available when your vehicle is traveling at speeds over 3 mph (5 km/h).
Receiving a Text Message
When a new message arrives, an audible tone sounds and the screen displays a pop-up with the caller name and ID, if supported by your cell phone. You can select:
Menu Item
Action and Description
Hear It
Have SYNC 3 read the message to you.
View Call Reply
Close
View the text on the touchscreen.
To call the sender.
You can select from 15 preset messages. Press the message that you would like to use and confirm to send the message. SYNC 3 confirms when the message is sent successfully.
To exit the screen.
Smartphone Connectivity(IfEquipped)
SYNC 3 allows you to use Apple CarPlay and Android Auto to access your phone.
When you use Apple CarPlay or Android Auto, you can: · Make calls. · Send and receive messages. · Listen to music. · Use your phone's voice assistant.
Apple CarPlay and Android Auto disable some SYNC 3 features.
Most Apple CarPlay and Android Auto features use mobile data.
Apple CarPlay
Apple CarPlay requires an iPhone 5 or newer with iOS 7.1 or newer. Updating to the latest iOS version is recommended.
1. Plug your phone into a USB port. See Entertainment (page 396).
411
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
2. Follow the prompts on the touchscreen.
3. Follow the prompts that appear on your phone to allow access to Apple CarPlay.
After completing the setup, your phone connects to CarPlay automatically when plugged into a USB port.
To disable this feature from the Settings screen, select:
Menu Item
Apple CarPlay Preferences
Your device is listed if SYNC detects Apple CarPlay. Select the name of your device and select:
Disable
To return to SYNC 3, go to the Apple CarPlay home screen and select the SYNC app.
Note: Contact Apple for Apple CarPlay support.
Android Auto
Android Auto is compatible with most devices with Android 5.0 or newer.
1. Download the Android Auto app to your device from Google Play to prepare your device (this may require mobile data usage).
Note: The Android Auto App may not be available within your current market.
2. Plug your device into a USB port. See Entertainment (page 396).
3. To switch this feature on from the Settings screen, scroll left on the screen and select:
Menu Item
Android Auto Preferences
Enable Android Auto
Note: Android Auto must be switched on after plugging in your device.
To disable this feature from the Settings screen, select:
Menu Item
Android Auto Preferences
Your device is listed if SYNC detects Android Auto. Select the name of your device and select:
Disable
Note: You may need to slide your Settings screen to the left to select Apple CarPlay Preferences or Android Auto Preferences. To return to SYNC 3, select the speedometer icon in the Android Auto menu bar at the bottom of the touchscreen, and then touch the option to return to SYNC. Note: Contact Google for Android Auto support.
NAVIGATION (If Equipped)
Your navigation system is comprised of two main features, destination mode and map mode.
412
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Map Mode
Map mode shows advanced viewing comprised of 2D city maps, 3D landmarks and 3D city models (when available). 2D city maps show detailed outlines of buildings, visible land use, landscape features, and detailed railroad infrastructure for the most essential cities around the globe.
3D landmarks appear as clear, visible objects that are typically recognizable and have a certain tourism value.
3D city models are complete 3D models of entire city areas including navigable roads, parks, rivers and rendered buildings. 3D landmarks and city models appear in 3D map mode only. Coverage of these varies and improves with updated map releases.
Select the zoom in icon to see a closer view of the map.
E207752
Select the zoom out icon to see a farther away view of the map.
E207753
You can adjust the view in preset increments. You can also pinch to zoom in or out of the map.
The information bar tells you the names of streets, cities or landmarks as you hover over them with the crosshair curser.
You can change your view of the map by tapping on the location indicator icon on the right hand side of the screen. You can choose from the following options:
E207750
Heading up (2D map) This always shows the direction of forward travel to be upward on the screen. This view is available for map scales up to 3 mi (5 km).
E207749
North up (2D map) always shows the northern direction to be upward on the screen.
3D map mode provides an elevated perspective of the map. Adjust this viewing angle and E207748 rotate the map 180 degrees by touching the map twice, and then dragging your finger along the shaded bar with arrows at the bottom of the map.
E207751
Re-center the map by pressing this icon whenever you scroll the map away from your vehicle's current location.
E251780
Mute: Press to mute the audio navigation guidance. Press the button again to un-mute the guidance.
E251779
Points of Interest (POI) grouping icon: You can choose up to three POI icons to display E207754 on the map. If the chosen POIs are located close together or are at the same location a box is used to display a single category icon instead of repeating the same icon, in order to reduce clutter. When you select the box on the map, a pop-up appears indicating how many POIs are in this location. Select the pop up to see a list of the available POIs. You can scroll through and select POIs from this list.
If your vehicle is low on charge or fuel, station icons automatically display on the map.
413
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
If you have subscribed to SiriusXM Traffic and Travel Link (where available), traffic flow will be indicated on the map by green (clear), yellow (slowing), and red (stopped) road highlights. Traffic flow is indicated where the information is available and varies across the US.
You can choose to display traffic icons on the map representing twelve different types of incidents. See Settings (page 423).
You can set a destination by hovering above a location and selecting:
Start
Button
Destination Mode
To set a destination, press:
Menu Item
Description
Destination
Enter a navigation destination in any of the following formats:
Search
Street Address
(number, street, city, state)
For example "12 Mainstreet Dearborn MI"
Partial Address (number, street) if searching in current state (number, street and zip code (or postal code in Canada)) if searching out of state You can enter unique addresses that contain door number prefixes with or without the prefix. For example, you could enter "6N340 Fairway Lane" or "340 Fairway Lane".
City
(name or zip code)
Point of Interest
(name or category)
Intersection
(street 1 / street 2) (street 1 and street 2) (street 1 & street 2) (street 1 @ street 2) (street 1 at street 2)
414
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item
Description
Latitude and Longitude
(##.###### , ##.######) This is in a decimal degrees format, one to six decimal places are accepted.
You are given autocomplete options below the address bar to select as you type. If you do not give an exact destination, a menu displays with your possible selections.
Previous Destina- Collections of your last 40 navigation destinations display here.
tions
You can select any option from the list to select it as your destination.
Delete Select this option to remove all previous destinations. All
Home
Select to navigate to your set Home destination. The time it takes to travel from your current location to Home displays. To set your Home, press:
Home A prompt appears asking if you would like to create a favorite for home. Select:
Yes
Enter a location into the search bar and press:
Save
Work
Select to navigate to your set Work destination. The time it takes to travel from your current location to Work displays. To set your Work:
Work
A prompt appears asking if you would like to create a favorite for work. Select:
Yes
Enter a location into the search bar and press:
Save
Favorites
Favorites include any location you have previously saved. To add Favorites:
Add a Select this button and enter a location into the destination Favorite bar.
Search Select this option to have the system locate the address you have entered.
Save
Select this button when the address you have entered appears on the screen.
415
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item
Description
The address saves as a favorite and you see the favorites screen. You can now select this address from the favorites screen.
Point of Interest POI categories that may display (based on market and vehicle (POI) Categories configuration):
Food
Fuel
Hotel
ATM
See All Press to view additional categories. Once you have selected a category, follow the menus to find what you are looking for.
Inside of these categories you can search by:
Nearby
Along Route
Near Destination
In a City
Once you have chosen your destination, press:
Menu Item
Action and Description
Save
This saves the destination to your favorites.
Start
This shows you a map of your entire route. You can then choose your route from three different options.
Fastest
Uses the fastest moving roads possible.
Shortest
Uses the shortest distance possible.
Economical Route
Uses the most fuel-efficient route.
The time and distance for each route also displays.
Cancel
On the route screen, you can choose to cancel the current navigation. The system asks for confirmation then returns you to the map mode screen.
416
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Once you have chosen you destination, press:
Menu Item
Action and Description
Start
The system uses a variety of screens and prompts to guide you to your destination. During Route guidance, you can press the maneuver arrow icon on the map if you want the system to repeat route guidance instructions. When the system repeats the last guidance instruction, it updates the distance to the next guidance instruction, since it detects that the vehicle is moving. The navigation map shows your estimated time of arrival, remaining travel time and the distance to your destination. SYNC 3 may not always announce vehicle arrival at the exact point of your destination and you may have to cancel a route manually.
Navigation Menu
In map mode and during active navigation you can access the navigation menu.
During active navigation, touch the bottom of the screen to view the menu and other buttons.
To access the Navigation menu, press:
Menu
You can then select:
Screen View
Full Map
Highway Exit Info
Turn List
Button
A full screen map displays during navigation.
Highway exit information displays on the right hand side of the screen during navigation. Points of interest icons display for restaurants, hotels, fuel stations and ATMs when they are present at the exit. You can select the POI icons to receive a listing of specific locations. You can select the POI location as a waypoint or destination if desired.
Only available during an active route. Displays all of the turns on the current route. You can choose to avoid any road on the turn list by selecting the road from the list. A screen then appears and you can press:
Avoid
The system calculates a new route and displays a new turn list.
417
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Button
Traffic List
You can find the SiriusXM Traffic and Travel Link information by pressing this button. This information requires an active subscription to SiriusXM Traffic and Travel Link. When a route is not active, a list of nearby traffic incidents displays (if any are present). When a route is active, you can choose to display a list of traffic nearby or on the route.
Navigation Settings
Press this button to adjust your preferences. See Settings (page 423).
Where Am I? Provides your current location city and the nearest road.
The following are only available on the menu during an active navigation route:
Cancel Route
The system asks for confirmation and then returns you to the map mode screen.
View Route
Press this to see a map of the full route.
Detour
An alternate route displays in comparison with the current route.
Edit Waypoints Only available if you have an active waypoint on your route. See Waypoints later in this section for information on how to set waypoints.
Use this button to re-order or remove your waypoints.
You can also have the system set the order for you by pressing:
Optimize Order
To return to Go your route press:
Waypoints
You can add a waypoint to a navigation route as a destination along your route. To add a waypoint:
1. Select the search icon (magnifying glass) while on an active route. This brings up the destination menu.
2. Set your destination using any of the given methods. Once the destination has been selected, the screen allows you to set the destination as a waypoint by selecting:
418
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item
Add Waypoint
The waypoint list then appears and you are able to re-order all of your waypoints by selecting the menu icon on the right hand side of the location. You can select up to five waypoints.
You can also have the system set the order Optimize Order for you by pressing:
To return to your route, press:
Go
SYNC AppLink
The AppLink app allows you to use some SYNC 3 navigation features on your phone.
First Mile Navigation
When you switch your ignition off, the location of your vehicle is recorded and sent to your SYNC AppLink app. The location of your vehicle can be viewed within the app. You can also view walking directions to your vehicle.
Last Mile Navigation
When you park near your destination, the system provides walking directions to your destination.
POI Search
Your paired phone can be used to access additional points of interest (POI). These points of interest can only be access when your phone is paired.
Send To Car
You can send destinations to your navigation system using a computer or phone using AppLink.
cityseeker (If Equipped) Note: cityseeker point of interest (POI) information is limited to approximately 1,110 cities (1,049 in the United States, 36 in Canada and 15 in Mexico).
E225487
cityseeker, when available, is a service that provides more information about certain points of interest such as restaurants, hotels and attractions. When you have selected a point of interest, the location and information appear, such as address, phone number and a star rating. Press More Information to see a photo, a review, a list of services and facilities, the average room or meal price and the web address. This screen displays the point of interest icons.
419
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
For restaurants, cityseeker can provide information such as star rating, average cost, review, handicap access, hours of operation, and website address.
For hotels, cityseeker can provide information such as star rating, price category, review, check-in and checkout times, hotel service icons and website address. Hotel service icons include:
· Restaurant
· Business center
· Handicap facilities
· Laundry
· Refrigerator
· 24 hour room service
· Fitness center
· Internet access
· Pool
· Wi-Fi
Attractions include nearby landmarks, amusement parks, historic buildings and more. cityseeker can provide information such as star rating, reviews, hour of operation and admission price.
SiriusXM Traffic and Travel Link (If
Equipped)
SiriusXM Traffic and Travel Link is available on vehicles equipped with navigation and only in select markets. You must activate and subscribe to receive SiriusXM Traffic and Travel Link information. It helps you locate the best gas prices, find movie listings, get current traffic alerts, view the weather map, get accurate ski conditions and see current sports scores. See Apps (page 420).
The system calculates a reasonable efficient route based on available speed limits, traffic, and road conditions. You may know a local short cut that is more efficient at a given time than the route provided by SYNC 3, but you should expect a slight difference in minutes or miles with the SYNC 3 route.
Navigation Map Updates
Annual navigation map updates are available for purchase through your dealership, by calling 1-866-462-8837 in the United States and Canada or 01-800-557-5539 in Mexico. You can also visit:
Website
www.navigation.com/sync
You need to specify the make and model of your vehicle to determine if there is an update available.
HERE is the digital map provider for the navigation application. If you find map data errors, you may report them directly to HERE by going to www.here.com/mapcreator. HERE evaluates all reported map errors and responds with the result of their investigation by e-mail.
Map coverage includes the USA (including Puerto Rico and the US Virgin Islands), Canada and Mexico.
APPS
The system enables voice, steering wheel, and touch screen control of SYNC 3 AppLink enabled smartphone apps.
Once an app is running through AppLink, you can control main features of the app through voice commands and steering wheel controls.
420
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Note: Available AppLink enabled apps will vary by market.
Note: You must pair and connect your smartphone via Bluetooth to SYNC 3 to access AppLink.
Note: iPhone users need to connect the phone to the USB port.
Note: For information on available apps, supported smartphone devices and troubleshooting tips please visit:
Websites
owner.ford.com www.syncmyride.ca www.syncmaroute.ca
Note: Make sure you have an active account for the app that you have downloaded. Some apps will work automatically with no setup. Other apps will want you to configure your personal settings and personalize your experience by creating stations or favorites.We recommend you do this at home or outside of your vehicle.
Note: We encourage you to review the smartphone app's terms of service and privacy policies because Ford is not responsible for your app or its use of data.
Note: AppLink is a native SYNC system feature. Accessing mobile apps through AppLink is only possible when Android Auto or Apple CarPlay are disabled. Some apps may only be accessible in the car through AppLink and others only through Android Auto or Apple CarPlay. Please refer to the Smartphone Connectivity information to disable Android Auto or Apple CarPlay.
Note: In order to use an app with SYNC 3, the app needs to be running in the background of your phone. If you shut down the app on your phone, it shuts down the app on SYNC 3 as well.
Note: If a SYNC 3 AppLink compatible app is not shown in the Apps Domain, make sure the required app is running on the mobile device.
Menu Item Find Mobile Apps
Action and Description
SYNC 3 will search and connect to compatible app(s) running on your mobile device.
Enabling SYNC 3 Mobile Apps
In order to enable mobile apps, SYNC 3 requires user consent to send and receive app authorization information and updates using the data plan associated with the connected device.
The connected device sends data to Ford in the United States. The information is encrypted and includes your VIN, SYNC 3 module number, odometer, usage statistics and debugging information. We retain this data for only as long as necessary to provide this service, troubleshoot, and improve products and services and to offer you products and services that may interest you where allowed by law.
Note: You must enable mobile apps for each connected device the first time you select a mobile app using the system.
Note: Ford reserves the right to limit functionality or deactivate mobile apps at any time.
Note: Standard data rates apply. Ford is not responsible for any additional charges you may receive from your service provider, when your vehicle sends or receives data through the connected device. This includes any additional charges incurred due to driving in areas when roaming out of a home network.
421
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
You can enable and disable apps through settings. See Settings (page 423).
App Permissions
The system organizes the App permissions into groups. You can grant these group permissions individually. You can change a permission group status any time when not driving, by using the settings menu. While in the settings menu, you can also see the data included in each group.
When you launch an app using SYNC 3, the system may ask you to grant certain permissions, for example Vehicle information, Driving characteristics, GPS and Speed, and/or Push notifications. You can enable all groups or none of them during the initial app permissions prompts. The settings menu offers individual group permission control.
Note: You are only prompted to grant permissions the first time you use an app with SYNC 3.
Note: If you disable group permissions, apps will still be enabled to work with SYNC 3 unless you deactivate All Apps in the settings menu.
SiriusXM Traffic and Travel Link (If
Equipped)
WARNING
Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
Note: SiriusXM Traffic and Travel Link may not be available in all markets.
Note: In order to use SiriusXM Traffic and Travel Link, your vehicle must have navigation.
Note: A paid subscription is required to access and use these features. Go to www.siriusxm.com/travellink for more information.
Note: Visit www.siriusxm.com/traffic and click on Coverage map and details for a complete listing of all traffic areas covered by SiriusXM Traffic and Travel Link.
Note: Neither Sirius nor Ford is responsible for any errors or inaccuracies in the SiriusXM Traffic and Travel Link services or its use in vehicles.
When you subscribe to SiriusXM Traffic and Travel Link, it can help you locate the best gas prices, find movie listings, get current traffic alerts, view the current weather map, get accurate ski conditions and see scores to current sports games.
422
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item Traffic on Route Traffic Nearby Fuel Prices Movie Listings Weather
Sports Info
Ski Conditions
Action and Description
Touch these buttons to identify traffic incidents on your route, near your vehicle's current location or near any of your favorite places, if programmed.
Touch this button to view fuel prices at stations close to your vehicle's location or on an active navigation route.
Touch this button to view nearby movie theaters and their show times, if available.
Touch this button to view the nearby weather, current weather, or the five-day forecast for the chosen area.
Map
Select to see the weather map, which can show storms, radar information, charts and winds.
Area
Select to choose from a listing of weather locations.
Touch this button to view scores and schedules from a variety of sports. You can also save up to 10 favorite teams for easier access. The score automatically refreshes when a game is in progress.
Touch this button to view ski conditions for a specific area.
SETTINGS
Under this menu, you can access and adjust the settings for many of the system features. To access additional settings, swipe the screen left or right.
Sound
Pressing this button allows you to adjust the following:
Reset All Treble Midrange Bass Balance / Fade
Sound Settings Returns Treble, Midrange, and Bass sound settings to factory levels. Adjusts the high frequency level. Adjusts the middle frequency level. Adjusts the low frequency level. Adjusts the sound ratio from side to side or front to back.
423
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Sound Settings
Speed Compensated Vol.
Adjusts the amount the audio system volume increases with speed, or turns the feature off.
Occupancy Mode Optimizes the sound based on the location of the listeners.
Sound Settings Stereo
Surround
Your vehicle might not have all of these features.
Media Player
This button is available when a media device such as a Bluetooth Stereo or USB device is the active audio source. Pressing the button allows you to access the following options for active devices only.
Menu Item
Action and Description
Podcast Speed For some USB devices, SYNC 3 can adjust the playback speed of podcasts. When a podcast is playing, you can choose:
Slower
Normal
Faster
Audiobook Speed For some USB devices, SYNC 3 can adjust the playback speed of audiobooks. When an audiobook is playing, you can choose:
Slower
Normal
Faster
Cover Art Priority Media Player
Cover art displays from your device's music files. If no cover art for the files exists on the device, then the Gracenote Database provides cover art.
Gracenote®
The Gracenote Database supplied cover art is used for your music files. This overrides any cover art from your device.
Gracenote® Management
Switches on and off Gracenote® to provide metadata information such as genre, artist, album.
424
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item
Action and Description
Gracenote® Data- This allows you to view the version level of the Gracenote Database. base Info
Device Informa- This allows you to view the manufacturer and model number of your
tion
media device.
Update Media Index
Erase the stored in media information in order to re-index.
Clock
To adjust the time, select the up and down arrows on either side of the screen. The arrows on the left adjust the hour and arrows on the right adjust the minute. You can then select AM or PM.
You can adjust the following features:
Menu Item
Clock Format
Auto Time Zone Update
Reset Clock to GPS Time
Action and Description
Select how time displays. When active, the clock adjusts to time zone changes. This feature is only available in vehicles with navigation. When selected, the vehicle clock resets to GPS satellite time.
The system automatically saves any updates you make to the settings.
Bluetooth
Pressing this button allows you to access the following:
Menu Item Bluetooth
Action
Turning Bluetooth off disconnects all devices and does not permit new connections.
You must activate Bluetooth to pair a Bluetooth-enabled device.
The processes of pairing a Bluetooth device is the same as pairing a phone. See Pairing a Device in Phone settings for how to pair a device and the available options.
Phone
Pair your Bluetooth-enabled phone with the system before using the functions in hands-free mode.
Switch on Bluetooth on your device to begin pairing. See your phone's manual if necessary.
425
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
To add a phone, select:
Menu Item
Add Phone
1. Follow the on-screen instructions. 2. A prompt alerts you to search for the
system on your phone. 3. Select your vehicle's make and model
as it displays on your phone. 4. Confirm that the six-digit number
appearing on your phone matches the six-digit number on the touchscreen. 5. The touchscreen indicates when the pairing is successful. 6. Your phone may prompt you to give the system permission to access information. To check your phone's compatibility, see your phone's manual or visit the website.
Alternatively, to add a phone, select:
Menu Item
Add Phone
Then select:
Discover Other Bluetooth Devices
1. Follow the on-screen instructions.
2. Select your phone's name when it appears on the touchscreen.
3. Confirm that the six-digit number appearing on your phone matches the six-digit number on the touchscreen.
4. The touchscreen indicates when the pairing is successful.
5. Your phone may prompt you to give the system permission to access information. To check your phone's compatibility, see your phone's manual or visit the website.
Other features, such as text messaging using Bluetooth and automatic phonebook download, are phone-dependent features.
To check your phone's compatibility, see your phone's manual or visit the website:
Website
owner.ford.com www.syncmyride.ca www.syncmaroute.ca
Once you have paired a device you can adjust the following options.
Menu Item
Action and Description
View Devices
You can then select:
Add a Bluetooth You can add a Bluetooth-enabled device by following the steps in
Device
the previous table.
You can select a phone by touching the name of the phone on the screen. You then have the following options:
Connect
Depending on the status of the device, you can select either of these options to interact with the selected device.
426
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item Disconnect Make Primary Delete
Action and Description
Allows you to select this device to be your preferred device. Removes the selected device from the system.
Pressing the info icon next to the device name allows you to see phone and device information
Menu Item
Action and Description
Manage Contacts
You can then select:
Auto-Download Enable this option to have SYNC 3 periodically re-download your
Contacts
phonebook to keep your contact list up to date.
Sort By:
Choose how you would like the system to display your contacts. You can choose:
First Name
Last Name
Re-download Contacts
Select this option to re-download your contact list manually.
Delete Contacts Select this option to delete the in vehicle contact list. Deleting the in vehicle list does not erase the contact list on the connected phone.
Menu Item
Action and Description
Set Phone Ringtone
You can then select:
No Ringtone
No sound plays when a call comes to your phone.
Use Phone Ring- The currently selected ringtone on your phone plays when you receive
tone
a call. This option may not be available for all phones. If this option
is available, it is the default setting.
You can also select one of the three available ringers.
427
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item
Action and Description
Text Messaging
You can then select:
No Alert (Silence)
No sound plays when a message comes to your phone.
You can select one of the three available notification sounds.
Voice Readout When enabled, a voice prompt alerts you when you receive a new message.
You can enable and disable the following options as well:
Menu Item
Action and Description
Mute Audio in Privacy
When enabled, vehicle audio (such as radio or apps) is muted for the duration of the phone call even when the phone call is in privacy.
Roaming Warning
When enabled, an alert displays that your phone is roaming when you attempt to place a call.
Low Battery Notification
When enabled, a message displays when the battery on your phone is running low.
911 Assist
Note: This service is only available in the United States and Canada.
Select this button to modify the on or off setting for this feature. If the mobile phone's contacts have been downloaded, you can adjust the following option:
Menu Item
Action and Description
Set Emergency You can select up to two numbers from your mobile device's phone-
Contacts
book as emergency contacts for quick access at the end of the 911
Assist call process.
Radio
This button is available if a Radio source such as AM or FM is the active media source. Pressing the button allows you to access the following features:
428
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item
Action and Description
FM HD Radio Activation of this feature allows you to listen to HD radio broadcasts.
AM HD Radio
(Dependent on current radio source, If Available)
Radio Text
This feature is available when FM Radio is your active media source. Activate this feature to have the system display radio text.
Autoset Presets Refresh
(AST)
Selecting this option stores the six strongest stations in your current
location to the last preset bank of the currently tuned source.
Sirius XM (If equipped)
Menu Item
Action and Description
Set Category for After selecting a category, seek function only stops on channels which
Seek
are inside that selected category.
Parental Lockout
Select to create a personal identification number (PIN). This allows you to lock or unlock channels. Your initial PIN is 1234.
Edit Alerts
Select to switch on, off or delete alerts.
The Electronic Serial Number can also be found on this screen. This number is necessary to activate, modify or track your account through Sirius XM.
Navigation
You can adjust many of the Navigation preferences by selecting the following menus.
429
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Map Preferences
Menu Item
Action and Description
Map Preferences
Then select any of the following:
3D City Model When this option is active, the system shows 3D renderings of buildings.
Breadcrumbs When enabled, your vehicle's previously traveled route displays with white dots.
POI Icons
Enable this feature to display up to 3 POI icons on the navigation map. A rest area POI icon may display on the map regardless of this setting.
Once this feature is activated you can select Select POIs the icons you want displayed by selecting:
Incident Map Icons
This menu allows you to choose which incident icons you would like to have displayed on the navigation map.
Route Preferences
Menu Item
Second Level Messages, Actions and Descriptions
Route Preferences
Then select any of the following:
Preferred Route Choose to have the system display your chosen route type.
Shortest
Fastest
Eco
Always Use ___ Route
Bypass route selection in destination programming. The system only calculates one route based on your preferred route setting. When activated, the system uses your selected route type to calculate only one route to the desired destination.
Use HOV Lanes The system selects High Occupancy Vehicle or car pool lanes when providing route guidance.
Automatically The system searches for and displays available parking locations as Find Parking you approach your destination.
Eco Time Penalty
Select a level of cost for the calculated Eco Route. The higher the setting, the longer the time allotment is for the route.
430
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item
Second Level Messages, Actions and Descriptions
Dynamic Route Guidance
Enable or disable considering traffic information when planning a route. The system can find a faster route based on heavy traffic flow information or detect a Road Closed incident and find a detour route if possible.
Avoid Freeways If selected, SYNC 3 avoids freeways when computing a navigation route.
Avoid Toll Roads
If selected, SYNC 3 avoids Toll Roads when computing a navigation route.
Avoid Ferries/Car Trains
If selected, SYNC 3 avoids the use of Ferries or Trains when computing a navigation route.
Navigation Preferences
Menu Item
Action and Description
Navigation Preferences
Guidance Prompts
You can adjust how the system provides prompts.
Then select any of the following:
Voice and Tones A tone sounds followed by voice instructions.
Voice Only
Only voice instructions are given.
Tones Only
Only a tone sounds to prompt you.
Mobile Apps
You can enable the control of compatible mobile apps running on your Bluetooth or USB device on SYNC 3. In order to enable mobile apps, SYNC 3 requires user consent to send and receive app authorization information and updates using the data plan associated with the connected device.
The connected devices sends data to Ford in the United States. The encrypted information includes your VIN, SYNC 3 module number, anonymous usage statistics and debugging information. Updates may take place automatically.
Note: All Mobile Apps may not be compatible with the system.
431
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Note: Standard data rates will apply. Ford is not responsible for any additional charges you may receive from your service provider, when your vehicle sends or receives data through the connected device. This includes any additional charges incurred due to driving in areas when roaming out of a home network.
Menu Item
Action and Description
Mobile Apps
Enable or disable the use of mobile apps on SYNC 3. Disabling mobile apps in the settings menu disables automatic updates and the use of mobile apps on SYNC 3.
You can view the status of mobile app permissions in the settings menu.
Once Mobile Apps is enabled, you have the following options:
Update Mobile This provides information on the current state of available app
Apps
updates.
There are three possible statuses:
Update Needed
Up-To-Date Updating Mobile Apps...
The system has
No update is
detected a new app required.
requiring authoriza-
tion or a general
permissions update is
required.
The system is trying to receive an update.
Request Update
Select this button if an update is required and you want to request this update manually. For example, when your mobile device is connected to a Wi-Fi hotspot, select:
432
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item
All Apps
There may also be SYNC 3 enabled apps listed under these options.
Action and Description
Request Update
Grant or deny permissions to all apps at once.
Grant or deny an individual app particular permissions. App permissions are organized into groups. By pressing the info book icon, you can see which signals are included in each group.
Note: Ford is not responsible or liable for any damages or loss of privacy relating to usage of an app, or dissemination of any vehicle data that you approve Ford to provide to an app.
General
Access and adjust the system settings, voice features, as well as phone, navigation and wireless settings.
Language Distance Temperature Touch Panel Beep Automatic System Updates
About SYNC Software Licenses Master Reset
Menu Item
Select to have the touchscreen display in English, Spanish or French.
Select to display units in kilometers or miles.
Select to display units in Celsius or Fahrenheit.
Select to have the system beep to confirm choices made through the touchscreen.
When you activate this option, the system automatically updates when you have an available Internet connection through a Wi-Fi network or mobile connection.
Information pertaining to the system and its software.
Documentation of the software license for the system.
Select to restore factory defaults. This erases all personal settings and personal data.
Wi-Fi & Hotspot
Access SYNC Wi-Fi and Vehicle Hotspot settings and information.
System Wi-Fi You can access the following:
433
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Menu Item Wi-Fi Available Networks
Wi-Fi Available Notifications
Action and Description
Enable this option to connect to Wi-Fi for SYNC 3 vehicle software updates.
This provides you with a list of available Wi-Fi networks within range.
Clicking on a network from the list allows you to connect or disconnect from that network. The system may require a security code to connect.
When you click the information button next to a network, more information about the network displays such as the signal strength, connection status and security type.
The system alerts you when your vehicle is parked and a Wi-Fi network is within range if SYNC is not already connected.
Vehicle Hotspot (If Equipped) You can access the following:
Menu Item
Action and Description
Wi-Fi Hotspot On/Off
Allows you to turn the hotspot on and off.
Settings
Allows you to view and edit hotspot settings such as the SSID and password.
Data Usage
Allows you to view your vehicle's hotspot plan and data usage.
Manage Devices Allows you to manage devices connected to your hotspot.
Note: The Vehicle Wi-Fi Hotspot (Vehicle Hotspot) may be operational while ignition is On and may remain operational while the ignition is Off.
Note: Vehicle Hotspot services are provided by the vehicle network carrier, subject to your vehicle network carrier agreement, coverage and availability.
Note: It is the account owner's responsibility to remove the vehicle from the vehicle network carrier account when ownership of the vehicle is transferred. If the owner would like to remove the vehicle from the account for any reason, please contact your vehicle network carrier for more information.
434
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Note: : Data, e.g. the Vehicle Identification Number (VIN), SIM Card ID, and data plan usage, is shared between Ford and the vehicle network carrier to provide the Vehicle Hotspot service in accordance with your vehicle network carrier agreement, coverage and availability, and may be used to enable a seamless transition from an old to new embedded modem and to confirm any updates are successfully delivered.
Note: : For your convenience data usage may be available for monitoring under Settings but may not reflect actual or current usage. The vehicle network carrier is responsible for providing information about your account. Please contact the vehicle network carrier for more information.
Note: : Ford may need to update operating system software on your vehicle, including security updates and bug fixes, to keep connected services current, like Vehicle Hotspot, without prior notice to you.
Note: If you do not have an active vehicle hotspot data plan, open your web browser and go to a website using the HTTP protocol to be automatically redirected to the vehicle network carrier landing page where you can purchase data. Websites using HTTPS will not automatically redirect.
Ambient Lighting (If Equipped)
Tap a color once to active ambient lighting. This sets the color to the highest intensity.
You can drag the colors up and down to increase or decrease the intensity.
To switch ambient lighting off, press the active color once or drag the active color all the way down to zero intensity.
Vehicle
Note: Your vehicle may not have all of these features.
You can select the following features to update their settings.
Door Keypad Code (If equipped)
Select this button to add or erase a personal door keypad code. To add or erase a personal code, you first need to enter the five-digit factory set code. You can find this code on the owner's wallet card in the glove box or from your authorized dealer.
Camera Settings
To make adjustments using the touchscreen, select:
Message
Action and Description
Camera Settings
Then select from the following:
Enhanced Park When the reverse sensing system detects an object, it displays red,
Aids
yellow and green highlights at the top of the image.
Rear Camera Delay
You can enable or disable this option using the slider.
You can find more information on the rear-view camera system in the parking aids chapter of your owner manual.
435
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Onboard Modem Serial Number (ESN) Selecting this button on the settings menu
shows you the ESN number for your system. You need this number for certain registrations such as Satellite Radio.
Display
To make adjustments using the touchscreen, select:
Menu Item
Action and Description
Brightness
Make the screen display brighter or dimmer.
Mode
You can select:
Auto
The screen automatically switches between day and night modes based on the outside light level.
Day
The screen displays with a light background to enhance
daytime viewing.
Night
The screen displays with a darker background to make nighttime viewing easier.
Off
The screen goes black and does not display anything.
To switch the screen back on, simply tap the screen.
Auto Dim
Enable this option to automatically dim the display brightness based on ambient lighting conditions.
Voice Control
You can adjust the voice control settings by selecting the following options.
Advanced Mode Phone Confirmation Voice Command List
Menu Item
Enable this option to remove additional voice prompts and confirmations.
Enable this option to have the system confirm a contacts name with you before making a call.
Enable this option to have the system display a list of available voice commands when the voice button is pressed.
436
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Valet Mode
Valet mode allows you to lock the system. No information is accessible until the system is unlocked with the correct PIN.
When you select valet mode a pop up appears informing you that a four digit code must be entered to enable and disable valet mode. You can use any PIN you chose but you must use the same PIN to disable valet mode. The system asks you to input the code.
Note: If the system is locked and you cannot remember the PIN, please contact the Customer Relationship Center.
United States: 1-800-392-3673 Canada: 1-800-565-3673
To enable valet mode, enter your chosen PIN. The system then asks to confirm your PIN by reentering it. The system then locks.
To unlock the system, enter the same pin number. The system reconnects to your phone and all of your options are available again.
SYNCTM 3 TROUBLESHOOTING
Your SYNC 3 system is easy to use. However, should questions arise, please refer to the tables below.
To check your cell phone's compatibility, refer to the regional Ford or Lincoln website.
Cell phone issues
Issue
Possible cause
Possible solution
There is background noise during a phone call.
The audio control settings on your cell phone may be affecting SYNC 3 performance.
Refer to your device's manual about audio adjustments.
During a call, I
can hear the other person but they cannot
Possible cell phone malfunction.
hear me.
Try switching your cell phone off, resetting it or removing the battery, then try again.
Make sure that the microphone for SYNC 3 is not set to off. Look for the microphone icon on the phone screen.
During a call, I
To restart your system, shut down the
cannot hear the other person and they cannot
The system may need to be restarted.
engine, open and close the door, and then lock the door and wait for 2-3 minutes. Make sure that your SYNC 3 screen is black
hear me.
and the lighted USB port is off.
SYNC 3 is not able to down-
This is a cell phonedependent feature.
load my phone- Possible cell phone
book.
malfunction.
Check your cell phone's compatibility.
Make sure you allow SYNC 3 to retrieve contacts from your phone. Refer to your cell manual.
437
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Cell phone issues
Issue
Possible cause
Possible solution
You must switch on your cell phone and the automatic phonebook download feature on SYNC 3.
Try switching your cell phone off, resetting it or removing the battery, then try again.
The system says "Phonebook downloaded" but my Limitations on your cell SYNC 3 phone- phone's capability. book is empty or is missing contacts.
Make sure you allow SYNC 3 to retrieve contacts from your phone. Refer to your cell manual.
If the missing contacts are stored on your SIM card, move them to your cell phone's memory.
You must switch on your cell phone and the automatic phonebook download feature on SYNC 3.
This is a cell phonedependent feature.
Check your cell phone's compatibility.
I am having trouble connecting my cell phone to SYNC 3.
Possible cell phone malfunction.
Try switching your cell phone off, resetting it or removing the battery, then try again.
Try deleting your device from SYNC 3 and deleting SYNC from your device, then trying again.
Always check the security and auto accept prompt settings relative to the SYNC 3 Bluetooth connection on your cell phone.
Update your cell phone's firmware.
Switch the auto download setting off.
Text messaging is not working on SYNC 3.
This is a cell phonedependent feature.
Possible cell phone malfunction.
iPhone
Check your cell phone's compatibility.
Try switching your cell phone off, resetting it or removing the battery, then try again. · Go to your cell phone's Settings. · Go to the Bluetooth Menu.
438
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Issue
Cell phone issues
Possible cause
Possible solution
· Press the blue circle to the right of the device named with your vehicle make and model to enter the next menu.
· Turn Show Notifications on.
· Disconnect then reconnect your iPhone from the SYNC 3 system to activate this settings update.
Your iPhone is now set up to forward incoming text messages to SYNC 3. Repeat these steps for every other SYNC 3 vehicle that you connect. Your iPhone will only forward incoming text messages to SYNC 3 if the iPhone is not unlocked in the messaging application. Replying to text messages using SYNC 3 is not supported by iPhone. Text messages from WhatsApp and Facebook Messenger are not supported.
Audible text messages do not work on my cell phone.
This is a cell phonedependent feature.
Your cell phone must support downloading text messages through Bluetooth to receive incoming text messages.
Because each cell phone is different, refer
to your device's manual for the specific cell
This is a cell phone limita- phone you are pairing. In fact, there can be
tion.
differences between cell phones due to
brand, model, service provider and software
version.
439
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
USB and Bluetooth Stereo issues
Issue
Possible cause
Possible solution
Disconnect the device from SYNC 3. Try switching your device off, resetting it or removing the battery, then reconnect it to SYNC 3.
I am having trouble connecting my device.
Make sure you are using the manufacturer's Possible device malfunc- cable. tion.
Make sure to correctly insert the USB cable into the device and your vehicle's USB port.
Make sure that the device does not have an auto-install program or active security settings.
The device has a lock screen enabled.
Make sure your device is unlocked before connecting it to SYNC 3.
SYNC 3 does
not recognize
Make sure you are not leaving the device in
my device when This is a device limitation. your vehicle during very hot or cold
I start my
temperatures.
vehicle.
This is a devicedependent feature.
Bluetooth audio The device is not
does not
connected.
stream.
The device is in a bad
state.
Make sure you connect the device to SYNC 3 and that you have started the media player on your device.
Try switching your device off, resetting it or removing the battery, then reconnect it to SYNC 3.
Your music files may not
contain the correct artist, Make sure that all song details are popu-
song title, album or genre lated.
SYNC 3 does information.
not recognize music that is on my device.
The file may be corrupted.
Try replacing the corrupt file with a new version.
The song may have
Some devices require you to change the
copyright protection that USB settings from mass storage to media
does not allow it to play. transfer protocol class.
440
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
USB and Bluetooth Stereo issues
Issue
Possible cause
Possible solution
The file format is not supported by SYNC 3.
Convert the file to a supported format. See Entertainment (page 396).
The device needs to be Update media index. See Settings (page
re-indexed.
423).
The device has a lock screen enabled.
Make sure your device is unlocked before connecting it to SYNC 3.
When I connect my device, I sometimes do not hear any sound.
This is a device limitation.
Disconnect the device from SYNC 3. Try switching your device off, resetting it or removing the battery, then connect it back to SYNC 3.
To listen to Apple devices through USB, select AirPlay from the devices Control Center, then select Dock Connector.
To listen to Apple devices through Bluetooth Stereo, select AirPlay from the devices Control Center, then select SYNC.
SYNC 3 does
not display the song information, repeat, or
The device or media player is incompatible.
shuffle buttons.
Connect a compatible device or media player.
Issue
Failed connection.
Wi-Fi Issues
Possible cause
Possible solution
Password error.
Verify password.
Weak signal.
Check for a poor Wi-Fi signal.
Multiple Access points within range with the same SSID.
Use a unique name for your SSID, don't use the default name unless it contains a unique identifier, such as part of the MAC address.
441
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Wi-Fi Issues
Issue
Possible cause
Possible solution
Disconnecting Weak signal probably Position the vehicle close to the hotspot
after successful due to distance from the with the front of the vehicle facing the
connection.
hotspot, obstruction or hotspot direction and remove obstacles if
high interference.
possible. Other Wi-Fi, Bluetooth, microwave
and cordless phones may cause interfer-
ence.
Poor signal seen There may be an
If the vehicle is equipped with heated
by SYNC 3
obstruction between windshield, try positioning the vehicle so
despite being SYNC 3 and the hotspot. that the windshield is not facing the
near a hotspot.
hotspot. If you have metallic window tinting
but not on the windshield, position the
vehicle to face the hotspot. If all windows
are tinted, you can open the windows in the
direction of the hotspot if that is feasible.
Try to remove other obstructions that may
impact signal quality such as opening the
garage door.
A hotspot is not The hotspot was defined Please set the network to visible and try
listed in the list as a hidden network.
again.
of available
networks.
442
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Wi-Fi Issues
Issue
Possible cause
Possible solution
SYNC 3 is not SYNC 3 does not
seen when
currently provide a
searching for hotspot.
Wi-Fi networks
from your phone
or other devices.
SYNC 3 currently does not provide a hotspot.
Software down- Poor signal strength, too Check the signal quality (under network
load takes too far from the hotspot, details), if SYNC 3 indicates good or excel-
long.
hotspot is supporting lent, test with another high-speed equipped
multiple connections, hotspot where the environment is more
slow Internet connection predictable.
or other problems.
SYNC 3 seems to connect with a hotspot and the signal strength is excellent but the software is not being updated.
It is possible that there is no new software. The connected hotspot may be a managed one and it requires either a subscription or agreeing to the terms and conditions.
Test the connection with another device, if the hotspot requires a subscription, you may contact the service provider.
443
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
AppLink issues
Issue
Possible cause(s)
Possible solution(s)
AppLink Mobile Applications: When I select "Find Mobile Apps," SYNC 3 does not find any applications.
You did not connect an Applink Compatible phone to SYNC 3.
Make sure you have a compatible smartphone; an Android with OS 2.3 or higher or an iPhone 3GS or newer with iOS 5.0 or higher. Additionally, make sure you pair and connect your phone to SYNC 3 in order to find AppLink-capable apps on your device. iPhone users must also connect to a USB port with an Apple USB cable.
My phone is
AppLink-enabled apps
connected, but I are not installed and
still cannot find running on your mobile
any apps.
device.
Make sure you have downloaded and installed the latest version of the app from your phone's app store. Make sure the app is running on your phone. Some apps require you to register or login to the app on the phone before using them with AppLink. Also, some may have a "Ford SYNC" setting, so check the app's settings menu on the phone.
My phone is connected, my app(s) are running, but I still cannot find any apps.
Sometimes apps do not properly close and reopen their connection to SYNC 3, over ignition cycles, for example.
Closing and restarting apps may help SYNC 3 find the application if you cannot discover it inside the vehicle. On an Android device, if apps have an 'Exit' or 'Quit' option, then select it and restart the app. If the app does not have that option, select the phone's settings menu and select 'Apps', then find the particular app and choose 'Force stop.' Do not forget to restart the app afterward, then select "Find Mobile Apps" on SYNC 3.
On an iPhone with iOS7+, to force close an app, double tap the home button then swipe up on the app to close it. Tap the home button again, then select the app again to restart it. After a few seconds, the app should then appear in SYNC 3's Mobile App's Menu.
444
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
AppLink issues
Issue
Possible cause(s)
Possible solution(s)
My Android
There is a Bluetooth issue Switch Bluetooth off and then on to reset
phone is
on some older versions it on your phone. If you are in your vehicle,
connected, my of the Android operating SYNC 3 should be able to automatically re-
app(s) are
system that may cause connect to your phone if you press the
running, I
apps that were found on "Phone" button.
restarted them, your previous vehicle
but I still cannot drive to not be found
find any apps. again if you did not
switch Bluetooth off.
My iPhone is connected, my app is running, I You may need to reset restarted the the USB connection to app but I still SYNC 3. cannot find it on SYNC 3.
Unplug the USB cable from the phone, wait a moment, and plug the USB cable back in to the phone. After a few seconds, the app should appear in SYNC 3's Mobile Apps Menu. If not, "Force Close" the application and restart it.
I have an Android phone. I found and started my media app on SYNC 3, but there is no sound or the sound is very low.
Increase the Bluetooth volume of the device by using the device's volume control buttons which are most often found on the side of the device. The Bluetooth volume on the phone may be low.
I can only see some of the AppLink apps running on my phone listed in the SYNC 3 Mobile Apps Menu.
Some Android devices Force close or uninstall the apps you do not
have a limited number of want SYNC 3 to find. If the app has a "Ford
Bluetooth ports that
SYNC" setting, disable that setting in the
apps can use to connect. app's settings menu on the phone.
If you have more AppLink
apps on your phone than
the number of available
Bluetooth ports, you will
not see all of your apps
listed in the SYNC 3
mobile apps menu.
445
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Voice command issues
Issue
Possible cause
Possible solution
SYNC 3 does not understand what I am saying.
You may be using the wrong voice commands.
Review the cell phone voice commands and the media voice commands at the beginning of their respective sections.
Refer to the audio display during an active voice session to find a list of voice commands there.
You may be speaking too Wait for the system to prompt you before
soon or at the wrong
you state your command.
time.
You may be using the Review the media voice commands at the wrong voice commands. beginning of the media section.
SYNC 3 does not understand the name of a song or artist.
You may not be saying the name exactly as it appears on your device.
Say the song or artist name exactly as it is displayed on your device. For example, say "Play Artist Prince" or "Play song Purple Rain".
Make sure you are saying the complete title such as "California remix featuring Jennifer Nettles".
If there are any abbreviations in the name, like ESPN or CNN, you have to spell those: "E-S-P-N" or "C-N-N".
The song or artist name may have some special characters that are not being recognized by SYNC 3.
Make sure that song titles, artists, album, and playlists names do not have any special characters like *, - or +.
SYNC 3 does not understand or is calling the wrong contact when I want to make a call.
You may not be saying the name exactly as it appears on your phonebook.
The contact name may contain special characters.
Make sure that you are saying the name exactly as it appears on your phone. For example, if your contact is "Joe Wilson", say "Call Joe Wilson". If your contact name is "Mom", say "Call Mom".
Make sure that your contact names do not have any special characters like *, - or +.
446
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Voice command issues
Issue
Possible cause
Possible solution
The SYNC 3 voice control system is having You may not be saying trouble recog- the name exactly as it nizing foreign appears on your phonenames stored book. on my cell phone.
SYNC 3 applies the phonetic pronunciation rules of the selected language to the contact names stored on your cell phone.
Helpful Hint: You can select your contact manually. Press PHONE. Select the option for phonebook and then contact name. Press the soft-key option to hear it. SYNC 3 will read the contact name to you, giving you some idea of the pronunciation it is expecting.
The SYNC 3
voice control
system is having
trouble recognizing foreign tracks, artists, albums, genres and playlist
You may be saying the foreign names using the currently selected language for SYNC 3.
names from my
media player or
USB flash drive.
SYNC 3 applies the phonetic pronunciation rules of the selected language to the names stored on your media player or USB flash drive. It is able to make some exceptions for very popular artist names (for example, U2) such that you can always use the English pronunciation for these artists.
The system generates voice prompts and the pronunciation of some words may not be accurate for my language.
SYNC 3 uses text-tospeech voice prompt technology.
SYNC 3 uses a synthetically generated voice rather than pre-recorded human voice.
SYNC 3 offers several new voice control features for a wide range of languages. Dialing a contact name directly from the phonebook without pre-recording (for example, "call John Smith") or selecting a track, artist, album, genre or playlist directly from your media player (for example, "play artist Madonna").
447
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Personal Profiles
Issue
Possible cause and solution
Personal Profiles have not been set up.
An invalid profile name was entered.
I cannot create a profile.
A memory button was not selected when prompted.
The vehicle's ignition was not On and in Park or was shifted out of Run or Park while creating a profile.
Personal Profiles is turned off.
The lock button was not selected on a keyfob when prompted.
The keyfob selected was already associated to another profile and an overwrite was declined.
I cannot link a keyfob.
A profile recall was performed while linking a keyfob.
The vehicle's ignition was not On and in Park, or was shifted out of Run or Park while linking a keyfob.
The old linking method is used.
The unsaved setting is not supported by Personal Profiles.
My personalized settings do not save.
A different Personal Profile is active than expected.
Another user has changed settings for the wrong Personal Profile.
A Personal Profile has not been created.
My profile will not recall.
Personal Profiles is turned off. The requested profile is already active.
The memory button being used is not linked to a profile.
448
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
Personal Profiles
Issue
Possible cause and solution
The keyfob being used is not linked to a profile.
The wrong keyfob is being used.
A button other than unlock or remote start is being pressed on a linked keyfob.
The Personal Profile was deleted.
My preset positions recall but my profile Personal Profiles is turned off. does not.
My profile recalls but my preset positions do not.
The vehicle is in motion.
The preset positions are the same as the Guest or previously active profile.
I lost a keyfob.
Unlink and relink your keyfob in the Personal Profiles menu. You may need to see your authorized dealer.
I lost all profiles.
Keyfobs had been erased and reprogramed. This could happen if you let dealership add a new keyfob to replace lost one.
Master Reset had been performed without your acknowledgement.
449
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
SYNCTM 3
General
Issue
Possible cause
Possible solution
SYNC 3 only supports four languages in a
The language
single module for text display, voice control
selected for the
and voice prompts. The country where you
instrument
bought your vehicle dictates the four
cluster and
languages based on the most popular
information and entertainment display does not match the SYNC 3 language (phone, USB,
SYNC 3 does not support the currently selected language for the instrument cluster and information and entertainment display.
languages spoken. If the selected language is not available, SYNC 3 remains in the current active language.
SYNC 3 offers several new voice control features for a wide range of languages. Dialing a contact name directly from the
Bluetooth
phonebook without pre-recording (for
audio, voice
example, "call John Smith") or selecting a
control and
track, artist, album, genre or playlist directly
voice prompts).
from your media player (for example, "play
artist Madonna").
SYNC 3 System Reset
The system has a System Reset feature that can be performed if the function of a SYNC 3 feature is lost. This reset is intended to restore functionality and will not erase any information previously stored in the system (such as paired devices, phonebook, call history, text messages, or user settings). To perform a System Reset, press and hold the Seek Up (>>|) button while pressing and holding the Radio Power button. After approximately 5 seconds the screen will go black. Allow 1-2 minutes for the system reset to complete. You may then resume using the SYNC 3 system.
For additional assistance with SYNC 3 troubleshooting, refer to the regional Ford or Lincoln website.
450
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Accessories
For a complete listing of the accessories that are available for your vehicle, please contact your authorized dealer or visit the online store web site:
Web Address (United States)
www.Accessories.Ford.com
Web Address (Canada)
www.Accessories.Ford.ca
Ford Motor Company will repair or replace any properly authorized dealer-installed Ford Original Accessory found to be defective in factory-supplied materials or workmanship during the warranty period, as well as any component damaged by the defective accessories. Ford Motor Company will warrant your Ford accessory through the warranty that provides the greatest benefit: · 24 months, unlimited mileage. · The remainder of your new vehicle
limited warranty. Contact an authorized dealer for details and a copy of the warranty.
Exterior Style
· Hood deflector*. · Side window deflectors*. · Splash guards. · Spoiler winglets.
Interior Style
· Door sill plates. · Floor mats. · Interior light kit. · Seat covers*.
Lifestyle
· Ash cup or smoker's packages. · Camping tent*. · Car cover*. · Cargo area protector. · Cargo net*. · Cargo shade. · Roof racks and carriers*. · Recovery hook (towing eye). · Soft cargo organizers. · Tablet cradle. · Trailer towing accessories.
Peace of Mind
· Bumper mounted warning sensors*. · Keyless entry keypad. · Remote start. · Roadside assistance kits*. · Vehicle security systems. · Wheel locks.
*Ford Licensed Accessories. The accessory manufacturer designs, develops and therefore warrants Ford Licensed Accessories, and does not design or test these accessories to Ford Motor Company engineering requirements. Contact an authorized Ford dealer for the manufacturer's limited warranty details, and request a copy of the Ford Licensed Accessories product limited warranty from the accessory manufacturer.
451
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Accessories
For maximum vehicle performance, keep the following information in mind when adding accessories or equipment to your vehicle: · When adding accessories, equipment,
passengers and luggage to your vehicle, do not exceed the total weight capacity of the vehicle or of the front or rear axle (GVWR or GAWR as indicated on the Safety Compliance Certification label). Ask an authorized dealer for specific weight information. · The Federal Communications Commission (FCC) and Canadian Radio Telecommunications Commission (CRTC) regulate the use of mobile communications systems that are equipped with radio transmitters, for example two-way radios, telephones and theft alarms. Any such equipment installed in your vehicle should comply with Federal Communications Commission (FCC) and Canadian Radio Telecommunications Commission (CRTC) regulations and should be installed only by an authorized dealer. · An authorized dealer needs to install mobile communications systems. Improper installation may harm the operation of your vehicle, particularly if the manufacturer did not design the mobile communication system specifically for automotive use. · If you or an authorized Ford dealer add any non-Ford electrical or electronic accessories or components to your vehicle, you may adversely affect battery performance and durability. In addition, you may also adversely affect the performance of other electrical systems in the vehicle.
452
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Ford Protect
PROTECT YOURSELF FROM THE RISING COST OF VEHICLE REPAIRS WITH A FORD PROTECT EXTENDED SERVICE PLAN.
Ford Protect Extended Service Plans (U.S. Only)
Ford Protect extended service plan means peace of mind. It's the extended service plan backed by Ford Motor Company, and provides more protection beyond the New Vehicle Limited Warranty coverage. When you visit your Ford Dealer, Insist on Ford Protect extended service plans!
Ford Protect Can Quickly Pay for Itself
One trip to the Service Center could easily exceed the price of your Ford Protect extended service plan. With Ford Protect extended service plan you minimize your risk for unexpected repair bills and rising repair costs.
Up to 1,000+ Covered Vehicle Components
There are four mechanical Ford Protect extended service plans with different levels of coverage. Ask your authorized dealer for details.
1. PremiumCARE - Our most comprehensive coverage. With over 1,000 covered components, this plan is so complete it's probably easier to list what's not covered.
2. ExtraCARE - Covers 113 components, and includes many high-tech items.
3. BaseCARE - Covers 84 components.
4. PowertrainCARE - Covers 29 critical components.
Ford Protect extended service plans are honored by all authorized Ford dealers in the U.S., Canada and Mexico.
That means you get: · Reliable, quality service at any Ford or
Lincoln dealership. · Repairs performed by factory trained
technicians, using genuine parts.
Rental Car Reimbursement
1st day Rental Benefit
If you bring your car into your dealer for service, we'll give you a loaner to use for the day.
Extended Rental Benefits
If your vehicle is kept overnight for covered repairs, you are eligible for rental car coverage, including warranty repairs, and Field Service Actions.
Roadside Assistance
Exclusive 24/7 roadside assistance, including:
· Towing, flat-tire change and battery jump starts.
· Out of fuel and lock-out assistance. · Travel expense reimbursement for
lodging, meals and rental car. · Assistance for taxi, shuttle, rental car
coverage or other transportation.
Transferable Coverage
If you sell your vehicle before your Ford Protect extended service plan coverage expires, you can transfer any remaining coverage to the new owner. Which should give you and your potential buyer a little more peace of mind.
453
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Ford Protect
Less Cost to Properly Maintain Your Vehicle
Ford Protect extended service plan also offers a Premium Maintenance Plan that covers all scheduled maintenance, and selected wear items. The coverage is prepaid, so you never have to worry about the cost of your vehicle's maintenance.
Covered maintenance includes:
· Windshield wiper blades.
· Spark plugs.
· The clutch disc (if equipped).
· Brake pads and linings.
· Shock absorbers.
· Struts.
· Engine Belts.
· Engine coolant hoses, clamps and o-rings.
· Diesel exhaust fluid replenishment (if equipped).
· Cabin air filter replacement every 20,000 mi (32,000 km) (electric vehicles only).
Interest Free Finance Options
Just a 10% down payment will provide you with an affordable, no interest, no fee payment program allowing you all the security and benefits Ford Protect extended service plan has to offer while paying over time. You are pre-approved with no credit check or hassles. To learn more, call our Ford Protect extended service plan specialists at 800-367-3377.
Ford Protect Extended Service Plan P.O. Box 321067 Detroit, MI 48232
Ford Protect Extended Service Plan (CANADA ONLY)
You can get more protection for your vehicle by purchasing a Ford Protect extended service plan. Ford Protect extended service plan is the only service contract backed by Ford Motor Company of Canada, Limited. Depending on the plan you purchase, Ford Protect extended service plan provides benefits such as:
· Rental reimbursement.
· Coverage for certain maintenance and wear items.
· Protection against repair costs after your New Vehicle Limited Warranty Coverage expires.
· Roadside Assistance benefits.
There are several Ford Protect extended service plans available in various time, distance and deductible combinations. Each plan is tailored to fit your own driving needs, including reimbursement for towing and rental. When you purchase Ford Protect extended service plan, you receive added peace-of-mind protection throughout Canada, the United States and Mexico, provided by a network of participating authorized Ford Motor Company dealers.
Note: Repairs performed outside of Canada, the United States and Mexico are not eligible for Ford Protect extended service plan coverage.
This information is subject to change. For more information; visit your local Ford of Canada dealer or www.ford.ca to find the Ford Protect extended service plan that is right for you.
454
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
GENERAL MAINTENANCE INFORMATION
Why Maintain Your Vehicle?
Carefully following the maintenance schedule helps protect against major repair expenses resulting from neglect or inadequate maintenance and may help to increase the value of your vehicle when you sell or trade it. Keep all receipts for completed maintenance with your vehicle.
We have established regular maintenance intervals for your vehicle based upon rigorous testing. It is important that you have your vehicle serviced at the proper times. These intervals serve two purposes; one is to maintain the reliability of your vehicle and the second is to keep your cost of owning your vehicle down.
It is your responsibility to have all scheduled maintenance performed and to make sure that the materials used meet the specifications identified in this owner's manual. See Capacities and Specifications (page 300).
Failure to perform scheduled maintenance invalidates warranty coverage on parts affected by the lack of maintenance.
Why Maintain Your Vehicle at Your Dealership?
Factory-Trained Technicians
Service technicians participate in extensive factory-sponsored certification training to help them become experts on the operation of your vehicle. Ask your dealership about the training and certification their technicians have received.
Genuine Ford and Motorcraft® Replacement Parts
Dealerships stock Ford, Motorcraft and Ford-authorized branded re-manufactured replacement parts. These parts meet or exceed our specifications. Parts installed at your dealership carry a nationwide 24-month or unlimited mile (kilometer) parts and labor limited warranty.
If you do not use Ford authorized parts they may not meet our specifications and depending on the part, it could affect emissions compliance.
Convenience
Many dealerships have extended evening and Saturday hours to make your service visit more convenient and they offer one stop shopping. They can perform any services that are required on your vehicle, from general maintenance to collision repairs.
Note: Not all dealers have extended hours or body shops. Please contact your dealer for details.
Protecting Your Investment
Maintenance is an investment that pays dividends in the form of improved reliability, durability and resale value. To maintain the proper performance of your vehicle and its emission control systems, make sure you have scheduled maintenance performed at the designated intervals.
Your vehicle is equipped with the Intelligent Oil-Life Monitor system, which displays a message in the information display at the proper oil change interval. This interval may be up to one year or 10,000 mi (16,000 km).
455
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
When the oil change message appears in the information display, it is time for an oil change. Make sure you perform the oil change within two weeks or 500 mi (800 km) of the message appearing. Make sure you reset the Intelligent Oil-Life Monitor after each oil change. See General Information (page 91).
If your information display resets prematurely or becomes inoperative, you should perform the oil change interval at six months or 5,000 mi (8,000 km) from your last oil change. Never exceed one year or 10,000 mi (16,000 km) between oil change intervals.
Your vehicle is very sophisticated and built with multiple, complex, performance systems. Every manufacturer develops these systems using different specifications and performance features. That is why it is important to rely upon your dealership to properly diagnose and repair your vehicle.
Ford Motor Company has recommended maintenance intervals for various parts and component systems based upon engineering testing. Ford Motor Company relies upon this testing to determine the most appropriate mileage for replacement of oils and fluids to protect your vehicle at the lowest overall cost to you and recommends against maintenance schedules that deviate from the scheduled maintenance information.
We strongly recommend the use of only genuine Ford, Motorcraft or Ford-authorized re-manufactured replacement parts engineered for your vehicle.
Additives and Chemicals
This owner's manual and the Ford Workshop Manual list the recommended additives and chemicals for your vehicle. We do not recommend using chemicals or additives not approved by us as part of your vehicle's normal maintenance. Please consult your warranty information.
Oils, Fluids and Flushing
In many cases, fluid discoloration is a normal operating characteristic and, by itself, does not necessarily indicate a concern or that the fluid needs to be changed. However, a qualified expert, such as the factory-trained technicians at your dealership, should inspect discolored fluids that also show signs of overheating or foreign material contamination immediately.
Make sure to change your vehicle's oils and fluids at the specified intervals or in conjunction with a repair. Flushing is a viable way to change fluid for many vehicle sub-systems during scheduled maintenance. It is critical that systems are flushed only with new fluid that is the same as that required to fill and operate the system or using a Ford-approved flushing chemical.
Owner Checks and Services
Make sure you perform the following basic maintenance checks and inspections every month or at six-month intervals.
456
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Check Every Month Engine oil level.
Function of all interior and exterior lights. Tires (including spare) for wear and proper pressure.
Windshield washer fluid level. Fuel and water separator. Drain if necessary (or if indicated by the information display).
Holes and slots in the tail pipe to make sure they are functional and clear of debris.
Check Every Six Months Battery connections. Clean if necessary. Body and door drain holes for obstructions. Clean if necessary. Cooling system fluid level and coolant strength. Door weatherstrips for wear. Lubricate if necessary. Hinges, latches and outside locks for proper operation. Lubricate if necessary.
Parking brake for proper operation. Safety belts and seat latches for wear and function. Safety warning lamps (brake, ABS, airbag and safety belt) for operation. Washer spray and wiper operation. Clean or replace blades as necessary.
Multi-Point Inspection In order to keep your vehicle running right, it is important to have the systems on your vehicle checked regularly. This can help identify potential issues and prevent major problems. We recommend having the following multi-point inspection performed at every scheduled maintenance interval to help make sure your vehicle keeps running great.
457
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Multi-Point Inspection
Accessory drive belt(s)
Hazard warning system operation
Battery performance
Horn operation
Engine air filter
Radiator, cooler, heater and air conditioning hoses
Exhaust system
Suspension components for leaks or damage
Exterior lamps operation
Steering and linkage
Fluid levels1; fill if necessary
Tires (including spare) for wear and proper pressure2
For oil and fluid leaks
Windshield for cracks, chips or pits
Half-shaft dust boots
Washer spray and wiper operation
1 Brake, coolant recovery reservoir, automatic transmission and window washer
2If your vehicle is equipped with a temporary mobility kit, check the tire sealant expiration Use By date on the canister. Replace as needed.
Be sure to ask your dealership service advisor or technician about the multi-point vehicle inspection. It is a comprehensive way to perform a thorough inspection of your vehicle. Your checklist gives you immediate feedback on the overall condition of your vehicle.
NORMAL SCHEDULED MAINTENANCE
This means you do not have to remember to change the oil on a mileage-based schedule. Your vehicle lets you know when an oil change is due by displaying a message in the information display.
The following table provides examples of vehicle use and its impact on oil change intervals. It is a guideline only. Actual oil change intervals depend on several factors and generally decrease with severity of use.
Intelligent Oil-Life MonitorTM
Your vehicle is equipped with an Intelligent Oil-Life Monitor that determines when you should change the engine oil based on how your vehicle is used. By using several important factors in its calculations, the monitor helps reduce the cost of owning your vehicle and reduces environmental waste at the same time.
458
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
When to Expect the OIL CHANGE REQUIRED Message
Interval
Vehicle Use and Example
Normal
7,50010,000 mi (12,00016,000 km)
Normal commuting with highway driving No, or moderate, load or towing Flat to moderately hilly roads No extended idling
Severe
5,0007,500 mi (8,00012,000 km)
Moderate to heavy load or towing Mountainous or off-road conditions Extended idling Extended hot or cold operation
3,0005,000 mi (5,0008,000 km)
Extreme
Maximum load or towing Extreme hot or cold operation
Normal Maintenance Intervals
At Every Oil Change Interval as Indicated by the Information Display1 Change engine oil and filter. Rotate the tires. Perform a multi-point inspection (recommended). Inspect the automatic transmission fluid level. Consult your dealer for requirements. Inspect the brake pads, rotors, hoses and parking brake. Inspect the engine cooling system strength and hoses. Inspect the exhaust system and heat shields. Inspect the rear axle and U-joints (ALL-Wheel Drive). Inspect the half-shaft boots. Inspect the steering linkage, ball joints, suspension, tire-rod ends, driveshaft and Ujoints.
459
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
At Every Oil Change Interval as Indicated by the Information Display1
Inspect the tires, tire wear and measure the tread depth.
Inspect the wheels and related components for abnormal noise, wear, looseness or drag. 1 Do not exceed one year or 10,000 mi (16,000 km) between service intervals.
Other Maintenance Items 1
Every 20,000 mi (32,000 km)
Replace cabin air filter.
Every 30,000 mi (48,000 km)
Replace engine air filter.
At 100,000 mi (160,000 km)
Change engine coolant. 2
Every 100,000 mi (160,000 km)
Replace spark plugs. Inspect accessory drive belt(s). 3
Every 150,000 mi (240,000 km)
Change automatic transmission fluid. Replace accessory drive belt(s). 4 Replace timing belt (1.5L engine).
1 Perform these maintenance items within 3,000 mi (4,800 km) of the last engine oil and filter change. Do not exceed the designated distance for the interval. 2 Initial replacement at six years or 100,000 mi (160,000 km), then every three years or 5,000 mi (8,000 km). 3 After initial inspection, inspect every other oil change until replaced.
4 If not replaced within the last 100,000 mi (160,000 km).
460
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
SPECIAL OPERATING CONDITIONS SCHEDULED MAINTENANCE
If you operate your vehicle primarily in any of the following conditions, you need to perform extra maintenance as indicated. If you operate your vehicle occasionally under any of these conditions, it is not necessary to perform the extra maintenance. For specific recommendations, see your dealership service advisor or technician.
Perform the services shown in the following tables when specified or within 3,000 mi (4,800 km) of the OIL CHANGE REQUIRED message appearing in the information display.
· Example 1: The OIL CHANGE REQUIRED message comes on at 28,751 mi (46,270 km). Perform the 30,000 mi (48,000 km) automatic transmission fluid replacement.
· Example 2: The OIL CHANGE REQUIRED message has not come on, but the odometer reads 30,000 mi (48,000 km) (for example, the Intelligent Oil-Life Monitor was reset at 25,000 mi (40,000 km)). Perform the engine air filter replacement.
Towing a Trailer or Using a Car-top Carrier
As required
Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart.
Inspect frequently, service Inspect rear axle and U-joints (AWD). as required
Every 30,000 mi (48,000 km)
Change automatic transmission fluid.
Every 60,000 mi (96,000 km)
Replace spark plugs.
Extensive Idling or Low-speed Driving for Long Distances, as in Heavy Commercial Use (Such as Delivery, Taxi, Patrol Car or Livery)
As required
Change engine oil and filter as indicated by the information display and perform services listed in the Normal Scheduled Maintenance chart.
Inspect frequently, service as required
Replace cabin air filter.1 Replace engine air filter.
461
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Extensive Idling or Low-speed Driving for Long Distances, as in Heavy Commercial Use (Such as Delivery, Taxi, Patrol Car or Livery)
Every 30,000 mi (48,000 km)
Change automatic transmission fluid.
Every 60,000 mi (96,000 km)
Replace spark plugs.
1 This is an optional feature.
Operating in Dusty or Sandy Conditions (Such as Unpaved or Dusty Roads)
Inspect frequently, service as required
Replace cabin air filter.1 Replace engine air filter.
Every 5,000 mi (8,000 km) Inspect the wheels and related components for abnormal noise, wear, looseness or drag.
Rotate tires, inspect tires for wear and measure tread depth.
Every 5,000 mi (8,000 km) Change engine oil and filter.
or six months
Perform multi-point inspection.
Every 30,000 mi (48,000 km)
Change automatic transmission fluid.
1 This is an optional feature.
Every oil change
Exclusive Use of E85 (Flex Fuel Vehicles Only)
If ran exclusively on E85, fill the fuel tank full with regular unleaded fuel.
Exceptions
There are several exceptions to the Normal Schedule:
462
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
California Fuel Filter Replacement
If you register your vehicle in California, the California Air Resources Board has determined that the failure to perform this maintenance item does not nullify the emission warranty or limit recall liability before the completion of your vehicle's useful life. Ford Motor Company, however, urges you to have all recommended maintenance services performed at the specified intervals and to record all vehicle service.
Hot Climate Oil Change Intervals
The normal oil change interval for vehicles operating in the Middle East, North Africa, Sub-Saharan Africa or locations with similar climates using an American Petroleum Institute (API) Certified for Gasoline Engines (Certification mark) oil of SM or SN quality is 3,000 mi (5,000 km).
If the available API SM or SN oils are not available, then the oil change interval is 2,000 mi (3,000 km).
Engine Air Filter and Cabin Air Filter Replacement
The life of the engine air filter and cabin air filter is dependent on exposure to dusty and dirty conditions. Vehicles operated in these conditions require frequent inspection and replacement of the engine air filter and cabin air filter.
SCHEDULED MAINTENANCE RECORD
Repair Order #:
Dealer stamp
Distance:
Engine hours (optional):
Multi-point inspection (recommended): E146852
Signature:
463
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
Dealer stamp
Signature:
464
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
Dealer stamp
Signature:
465
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
Dealer stamp
Signature:
466
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
Dealer stamp
Signature:
467
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
Dealer stamp
Signature:
468
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
Dealer stamp
Signature:
469
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
Dealer stamp
Signature:
470
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
Dealer stamp
Signature:
471
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
Dealer stamp
Signature:
472
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Scheduled Maintenance
Repair Order #: Distance: Engine hours (optional): Multi-point inspection (recommended): E146852
Dealer stamp
Signature:
473
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
ELECTROMAGNETIC COMPATIBILITY
WARNINGS Do not place objects or mount equipment on or near the airbag cover, on the side of the seatbacks (of the front seats), or in front seat areas that may come into contact with a deploying airbag. Failure to follow these instructions may increase the risk of personal injury in the event of a crash.
Do not fasten antenna cables to original vehicle wiring, fuel pipes and brake pipes.
Keep antenna and power cables at least 4 in (10 cm) from any electronic modules and airbags.
Car
Note: We test and certify your vehicle to meet electromagnetic compatibility legislation (UNECE Regulation 10 or other applicable local requirements). It is your responsibility to make sure that any equipment an authorized dealer installs on your vehicle complies with applicable local legislation and other requirements.
Note: Any radio frequency transmitter equipment in your vehicle (such as cellular telephones and amateur radio transmitters) must keep to the parameters in the following table. We do not provide special provisions or conditions for installations or use.
E239120
474
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
Van
E239122
Truck
E239121
475
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
Frequency Band Maximum output power Watt (Peak
MHz
RMS)
1-30
50
50-54
50
68-88
50
142-176
50
380-512
50
806-870
10
Antenna Positions
1 2, 3 2, 3 2, 3 2, 3 2, 3
Note: After the installation of radio frequency transmitters, check for disturbances from and to all electrical equipment in your vehicle, both in the standby and transmit modes.
Check all electrical equipment:
· With the ignition ON.
· With the engine running.
· During a road test at various speeds.
Check that electromagnetic fields generated inside your vehicle cabin by the transmitter installed do not exceed applicable human exposure requirements.
END USER LICENSE
AGREEMENT
VEHICLE SOFTWARE END USER LICENSE AGREEMENT (EULA)
· You ("You" or "Your" as applicable) have acquired a vehicle having several devices, including SYNC ® and various control modules, ("DEVICES") that include software licensed or owned by Ford Motor Company and its affiliates ("FORD MOTOR COMPANY"). Those software products of FORD MOTOR COMPANY origin, as well as associated media, printed materials, and "online" or electronic documentation ("SOFTWARE") are protected by international intellectual property laws and treaties. The SOFTWARE is licensed, not sold. All rights reserved.
· The SOFTWARE may interface with and/or communicate with, or may be later upgraded to interface with and/or communicate with additional software and/or systems provided by FORD MOTOR COMPANY.
476
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
IF YOU DO NOT AGREE TO THIS END USER LICENSE AGREEMENT ("EULA") DO NOT USE THE DEVICES OR COPY THE SOFTWARE. ANY USE OF THE SOFTWARE, INCLUDING BUT NOT LIMITED TO USE ON THE DEVICES, WILL CONSTITUTE YOUR AGREEMENT TO THIS EULA (OR RATIFICATION OF ANY PREVIOUS CONSENT).
GRANT OF SOFTWARE LICENSE: This EULA grants you the following license:
· You may use the SOFTWARE as installed on the DEVICES and as otherwise interfacing with systems and/or services provide by or through FORD MOTOR COMPANY or its third party software and service providers.
Description of Other Rights and Limitations
· Speech Recognition: If the SOFTWARE includes speech recognition component(s), you should understand that speech recognition is an inherently statistical process and that recognition errors are inherent in the process. Neither FORD MOTOR
COMPANY nor its suppliers shall be liable for any damages arising out of errors in the speech recognition process. It is your responsibility to monitor any speech recognition functions included in the system.
· Limitations on Reverse Engineering, Decompilation and Disassembly: You may not reverse engineer, decompile, translate, disassemble or attempt to discover any source code or underlying ideas or algorithms of the SOFTWARE nor permit others to reverse engineer, decompile or disassemble the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation or to the extent as may be permitted by the licensing terms governing use of any open source components included with the SOFTWARE.
· Limitations on Distributing, Copying, Modifying and Creating Derivative Works: You may not distribute, copy, make modifications to or create derivative works based on the SOFTWARE, except and only to the extent that such activity is expressly permitted by applicable law notwithstanding this limitation or to the extent as may be permitted by the licensing terms governing use of any open source components included with the SOFTWARE.
· Single EULA: The end user documentation for the DEVICES and related systems and services may contain multiple EULAs, such as multiple translations and/or multiple media versions (e.g., in the user documentation and in the software). Even if you receive multiple EULAs, you are licensed to use only one (1) copy of the SOFTWARE.
477
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
· SOFTWARE Transfer: You may permanently transfer your rights under this EULA only as part of a sale or transfer of the DEVICES, provided you retain no copies, you transfer all of the SOFTWARE (including all component parts, the media and printed materials, any upgrades, and, if applicable, the Certificate(s) of Authenticity), and the recipient agrees to the terms of this EULA. If the SOFTWARE is an upgrade, any transfer must include all prior versions of the SOFTWARE.
· Termination: Without prejudice to any other rights, FORD MOTOR COMPANY may terminate this EULA if you fail to comply with the terms and conditions of this EULA.
· Internet-Based Services Components: The SOFTWARE may contain components that enable and facilitate the use of certain Internet-based services. You acknowledge and agree that FORD MOTOR COMPANY, third party software and service suppliers, its affiliates and/or its designated agent may automatically check the version of the SOFTWARE and/or its components that you are utilizing and may provide upgrades or supplements to the SOFTWARE that may be automatically downloaded to your DEVICES.
· Additional Software/Services: The SOFTWARE may permit FORD MOTOR COMPANY, third party software and service suppliers, its affiliates and/or its designated agent to provide or make available to you SOFTWARE updates, supplements, add-on components, or Internet-based services components of the SOFTWARE after the date you obtain your initial copy of the SOFTWARE ("Supplemental Components".) SOFTWARE updates may cause you to incur additional
charges from your wireless service provider. If FORD MOTOR COMPANY or third party software and services suppliers provide or make available to you Supplemental Components and no other EULA terms are provided along with the Supplemental Components, then the terms of this EULA shall apply. FORD MOTOR COMPANY, its affiliates and/or its designated agent reserve the right to discontinue without liability any Internet-based services provided to you or made available to you through the use of the SOFTWARE.
· Links to Third Party Sites: The SOFTWARE may provide you with the ability to link to third party sites. The third party sites are not under the control of FORD MOTOR COMPANY, its affiliates and/or its designated agent. Neither FORD MOTOR COMPANY nor its affiliates nor its designated agent are responsible for (I) the contents of any third party sites, any links contained in third party sites, or any changes or updates to third party sites, or (ii) webcasting or any other form of transmission received from any third party sites. If the SOFTWARE provides links to third party sites, those links are provided to you only as a convenience, and the inclusion of any link does not imply an endorsement of the third party site by FORD MOTOR COMPANY, its affiliates and/or its designated agent.
· Obligation to Drive Responsibly: You recognize your obligation to drive responsibly and keep attention on the road. You will read and abide with the DEVICES operating instructions particularly as they pertain to safety and you agree to assume any risk associated with the use of the DEVICES.
478
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
UPGRADES AND RECOVERY MEDIA: If the SOFTWARE is provided by FORD MOTOR COMPANY separate from the DEVICES on media such as a ROM chip, CD ROM disk(s) or via web download or other means, and is labeled "For Upgrade Purposes Only" or "For Recovery Purposes Only" you may install one (1) copy of such SOFTWARE onto the DEVICES as a replacement copy for the existing SOFTWARE, and use it in accordance with this EULA, including any additional EULA terms accompanying the upgrade SOFTWARE.
INTELLECTUAL PROPERTY RIGHTS: All title and intellectual property rights in and to the SOFTWARE (including but not limited to any images, photographs, animations, video, audio, music, text and "applets" incorporated into the SOFTWARE), the accompanying printed materials, and any copies of the SOFTWARE, are owned by FORD MOTOR COMPANY, or its affiliates or suppliers. The SOFTWARE is licensed, not sold. You may not copy the printed materials accompanying the SOFTWARE. All title and intellectual property rights in and to the content which may be accessed through use of the SOFTWARE is the property of the respective content owner and may be protected by applicable copyright or other intellectual property laws and treaties. This EULA grants you no rights to use such content outside its intended use. All rights not specifically granted under this EULA are reserved by FORD MOTOR COMPANY, its affiliates, and third party software and service providers and suppliers. Use of any on-line services which may be accessed through the SOFTWARE may be governed by the respective terms of use relating to such services. If this SOFTWARE contains documentation that is provided only in electronic form, you may print one copy of such electronic documentation.
EXPORT RESTRICTIONS: You acknowledge that the SOFTWARE is subject to U.S. and European Union export jurisdiction. You agree to comply with all applicable international and national laws that apply to the SOFTWARE, including the U.S. Export Administration Regulations, as well as end-user, end-use and destination restrictions issued by U.S. and other governments.
TRADEMARKS: This EULA does not grant you any rights in connection with any trademarks or service marks of FORD MOTOR COMPANY, its affiliates, and third party software and service providers.
PRODUCT SUPPORT: Please refer to FORD MOTOR COMPANY instructions provided in the documentation for the DEVICES product support, such as the vehicle owner guide.
Should you have any questions concerning this EULA, or if you desire to contact FORD MOTOR COMPANY for any other reason, please refer to the address provided in the documentation for the DEVICES.
No Liability for Certain Damages: EXCEPT AS PROHIBITED BY LAW, FORD MOTOR COMPANY, ANY THIRD PARTY SOFTWARE OR SERVICES SUPPLIERS, AND THEIR AFFILIATES SHALL HAVE NO LIABILITY FOR ANY INDIRECT, SPECIAL, CONSEQUENTIAL OR INCIDENTAL DAMAGES ARISING FROM OR IN CONNECTION WITH THE USE OR PERFORMANCE OF THE SOFTWARE. THIS LIMITATION SHALL APPLY EVEN IF ANY REMEDY FAILS OF ITS ESSENTIAL PURPOSE. THERE ARE NO WARRANTIES OTHER THAN THOSE THAT MAY BE EXPRESSLY PROVIDED FOR YOUR NEW VEHICLE.
479
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
SYNC® Automotive Important Safety Information Read and follow instructions:
· Before using your SYNC® system, read and follow all instructions and safety information provided in this end user manual ("Owner Guide".) Not following precautions found in the Owner Guide can lead to an accident or other serious injuries.
General Operation
· Voice Command Control: Certain functions within the SYNC® system may be accomplished using voice commands. Using voice commands while driving helps you to operate the system without removing your hands from the wheel or eyes from the road.
· Prolonged Views of Screen: Do not access any function requiring a prolonged view of the screen while you are driving. Pull over in a safe and legal manner before attempting to access a function of the system requiring prolonged attention.
· Volume Setting: Do not raise the volume excessively. Keep the volume at a level where you can still hear outside traffic and emergency signals while driving. Driving while unable to hear these sounds could cause an accident.
· Navigation Features: Any navigation features included in the system are intended to provide turn by turn instructions to get you to a desired destination. Please make certain all persons using this system carefully read and follow instructions and safety information fully.
· Distraction Hazard: Any navigation features may require manual (non-verbal) setup. Attempting to perform such set-up or insert data while driving can distract your attention and could cause an accident or other serious injury. Stop the vehicle in a safe and legal manner before attempting these operations.
· Let Your Judgment Prevail: Any navigation features are provided only as an aid. Make your driving decisions based on your observations of local conditions and existing traffic regulations. Any such feature is not a substitute for your personal judgment. Any route suggestions made by this system should never replace any local traffic regulations or your personal judgment or knowledge of safe driving practices.
· Route Safety: Do not follow the route suggestions if doing so would result in an unsafe or illegal maneuver, if you would be placed in an unsafe situation, or if you would be directed into an area that you consider unsafe. The driver is ultimately responsible for the safe operation of the vehicle and therefore, must evaluate whether it is safe to follow the suggested directions.
· Potential Map Inaccuracy: Maps used by this system may be inaccurate because of changes in roads, traffic controls or driving conditions. Always use good judgment and common sense when following the suggested routes.
· Emergency Services: Do not rely on any navigation features included in the system to route you to emergency services. Ask local authorities or an emergency services operator for these locations. Not all emergency services such as police, fire stations, hospitals and clinics are likely to be contained in the map database for such navigation features.
480
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
Your Responsibilities and Assumptions of Risk
· You agree to each of the following:(a) Any use of the SOFTWARE while driving an automobile or other vehicle in violation of applicable law or otherwise driving in an unsafe manner presents a significant risk of distracted driving and should not be attempted under any circumstances;(b) Use of the SOFTWARE at excessive volume poses a significant risk of hearing damage and should not be attempted under any circumstances;(c) The SOFTWARE may not be compatible with new or different versions of an operating system, third party software, or third party services, and the SOFTWARE may potentially cause a critical failure of an operating system, third party software, or third party service.(d) Any third party service accessed by or third party software used with the SOFTWARE (I) may charge an additional fee for access, (ii) may not work correctly, on an uninterrupted basis, or error free, (iii) may change streaming formats or discontinue operation, (iv) may contain adult, profane or offensive content; and (v) may contain inaccurate, false or misleading traffic, weather, financial or safety information or other content; and (e) Use of the SOFTWARE may cause you to incur additional charges from your wireless service provider (WSP) and any data or minute calculators that may be included in the software program are for reference only, are not warranted in any way and should not be relied upon in anyway.
· When using the SOFTWARE, you agree to be responsible for and assume the entire risk to the items set forth in Section (a) (e) above.
Disclaimer of Warranty
YOU EXPRESSLY ACKNOWLEDGE AND AGREE THAT USE OF THE DEVICES AND SOFTWARE IS AT YOUR SOLE RISK AND THAT THE ENTIRE RISK AS TO SATISFACTORY QUALITY, PERFORMANCE, COMPATIBILITY, ACCURACY AND EFFORT IS WITH YOU. TO THE MAXIMUM EXTENT PERMITTED BY APPLICABLE LAW, THE SOFTWARE AND ANY THIRD PARTY SOFTWARE OR THIRD-PARTY SERVICES ARE PROVIDED "AS IS" AND "AS AVAILABLE", WITH ALL FAULTS AND WITHOUT WARRANTY OF ANY KIND, AND FORD MOTOR COMPANY HEREBY DISCLAIMS ALL WARRANTIES AND CONDITIONS WITH RESPECT TO THE SOFTWARE, THIRD PARTY SOFTWARE, AND THIRD-PARTY SERVICES, EITHER EXPRESS, IMPLIED OR STATUTORY, INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES AND/OR CONDITIONS OF MERCHANTABILITY, OF SATISFACTORY QUALITY, OF FITNESS FOR AN ARTICULAR PURPOSE, OF ACCURACY, OF QUIET ENJOYMENT, AND NON-INFRINGEMENT OF THIRD-PARTY RIGHTS. FORD MOTOR COMPANY DOES NOT WARRANT (a) AGAINST INTERFERENCE WITH YOUR ENJOYMENT OF THE SOFTWARE, THIRD PARTY SOFTWARE, OR THIRD-PARTY SERVICES, (b) THAT THE SOFTWARE, THIRD PARTY SOFTWARE, OR THIRD-PARTY SERVICES WILL MEET YOUR REQUIREMENTS, (c) THAT THE OPERATION OF THE SOFTWARE, THIRD PARTY SOFTWARE, OR THIRD-PARTY SERVICES WILL BE UNINTERRUPTED OR ERROR-FREE, (d) OR THAT DEFECTS IN THE SOFTWARE, THIRD PARTY SOFTWARE, OR THIRD-PARTY SERVICES WILL BE CORRECTED. NO ORAL OR WRITTEN INFORMATION OR ADVICE GIVEN BY FORD MOTOR COMPANY OR ITS AUTHORIZED REPRESENTATIVE SHALL
481
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
CREATE A WARRANTY. SHOULD THE SOFTWARE, THIRD PARTY SOFTWARE, OR THIRD-PARTY SERVICES PROVE DEFECTIVE, YOU ASSUME THE ENTIRE COST OF ALL NECESSARY SERVICING, REPAIR OR CORRECTION. SOME JURISDICTIONS DO NOT ALLOW THE DISCLAIMER OF IMPLIED WARRANTIES OR LIMITATIONS ON APPLICABLE STATUTORY RIGHTS OF A CONSUMER, SO THE ABOVE DISCLAIMER MAY NOT FULLY APPLY TO YOU. THE SOLE WARRANTY PROVIDED BY FORD MOTOR COMPANY SHALL BE FOUND IN THE WARRANTY INFORMATION INCLUDING WITH YOUR OWNER GUIDE. TO THE EXTENT THAT THERE IS ANY CONFLICT BETWEEN THE TERMS OF THIS SECTION AND THE WARRANTY BOOKLET, THE WARRANTY BOOKLET SHALL CONTROL.
Applicable Law, Venue, Jurisdiction
· The laws of the State of Michigan govern this EULA and Your use of the SOFTWARE. Your use of the SOFTWARE may also be subject to other local, state, national, or international laws. Any litigation arising out of or related to this EULA shall be brought and maintained exclusively in a court of the State of Michigan located in Wayne County or in the United States District Court for the Eastern District of Michigan. You hereby consent to submit to the personal jurisdiction of a court in the State of Michigan located in Wayne County and the United States District Court for the Eastern District of Michigan for any dispute arising out of or relating to this EULA.
Binding Arbitration and Class Action Waiver
(a) Application. This Section applies to any dispute EXCEPT IT DOES NOT INCLUDE A DISPUTE RELATING TO COPYRIGHT INFRINGEMENT, OR TO THE ENFORCEMENT OR VALIDITY OF YOUR, FORD MOTOR COMPANY, OR ANY OF FORD MOTOR COMPANY'S LICENSORS' INTELLECTUAL PROPERTY RIGHTS. Dispute means any dispute, action, or other controversy between You and FORD MOTOR COMPANY, other than the exceptions listed above, concerning the SOFTWARE (including its price) or this EULA, whether in contract, warranty, tort, statute, regulation, ordinance, or any other legal or equitable basis.
(b) Notice of Dispute. In the event of a Dispute, You or FORD MOTOR COMPANY must give the other a "Notice of Dispute", which is a written statement of the name, address, and contact information of the party giving it, the facts giving rise to the dispute, and the relief requested. You and FORD MOTOR COMPANY will attempt to resolve any dispute through informal negotiation within 60 days from the date the Notice of Dispute is sent. After 60 days, You or FORD MOTOR COMPANY may commence arbitration.
(c) Small claims court. You may also litigate any dispute in small claims court in your county of residence or FORD MOTOR COMPANY'S principal place of business, if the dispute meets all requirements to be heard in the small claims court. You may litigate in small claims court whether or not You negotiated informally first.
(d) Binding arbitration. If You and FORD MOTOR COMPANY, do not resolve any dispute by informal negotiation or in small claims court, any other effort to resolve the dispute will be conducted exclusively by binding arbitration. You are giving up
482
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
the right to litigate (or participate in as a party or class member) all disputes in court before a judge or jury. Instead, all disputes will be resolved before a neutral arbitrator, whose decision will be final except for a limited right of appeal under the Federal Arbitration Act. Any court with jurisdiction over the parties may enforce the arbitrator's award.
(e) Class action waiver. Any proceedings to resolve or litigate any dispute in any forum will be conducted solely on an individual basis. Neither you nor FORD MOTOR COMPANY, will seek to have any dispute heard as a class action, as a private attorney general action, or in any other proceeding in which any party acts or proposes to act in a representative capacity. No arbitration or proceeding will be combined with another without the prior written consent of all parties to all affected arbitrations or proceedings.
(f) Arbitration procedure. Any arbitration will be conducted by the American Arbitration Association (the "AAA"), under its Commercial Arbitration Rules. If You are an individual and use the SOFTWARE for personal or vehicle use, or if the value of the dispute is $75,000 or less whether or not You are an individual or how You use the SOFTWARE, the AAA Supplementary Procedures for Consumer-Related Disputes will also apply. To commence arbitration, submit a Commercial Arbitration Rules Demand for Arbitration form to the AAA. You may request a telephonic or in-person hearing by following the AAA rules. In a dispute involving $10,000 or less, any hearing will be telephonic unless the arbitrator finds good cause to hold an in-person hearing instead. For more information, see adr.org or call 1-800-778-7879. You agree to commence arbitration only in your county of residence or FORD MOTOR COMPANY'S principal place of business. The arbitrator
may award the same damages to You individually as a court could. The arbitrator may award declaratory or injunctive relief only to You individually, and only to the extent required to satisfy Your individual claim.
(g) Arbitration fees and incentives.
· I. Disputes involving $75,000 or less. FORD MOTOR COMPANY will promptly reimburse your filing fees and pay the AAA's and arbitrator's fees and expenses. If you reject FORD MOTOR COMPANY'S last written settlement offer made before the arbitrator was appointed ("last written offer"), your dispute goes all the way to an arbitrator's decision (called an "award"), and the arbitrator awards you more than the last written offer, FORD MOTOR COMPANY will give you three incentives: (1) pay the greater of the award or $1,000; (2) pay twice your reasonable attorney's fees, if any; and (3) reimburse any expenses (including expert witness fees and costs) that your attorney reasonably accrues for investigating, preparing, and pursuing your claim in arbitration. The arbitrator will determine the amounts.
· ii. Disputes involving more than $75,000. The AAA rules will govern payment of filing fees and the AAA's and arbitrator's fees and expenses.
· iii. Disputes involving any amount. In any arbitration you commence, FORD MOTOR COMPANY will seek its AAA or arbitrator's fees and expenses, or Your filing fees it reimbursed, only if the arbitrator finds the arbitration frivolous or brought for an improper purpose. In any arbitration FORD MOTOR COMPANY commences, it will pay all
483
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
filing, AAA, and arbitrator's fees and expenses. It will not seek its attorney's fees or expenses from you in any arbitration. Fees and expenses are not counted in determining how much a dispute involves.
(h) Claims or disputes must be filed within one year. To the extent permitted by law, any claim or dispute under this EULA to which this Section applies must be filed within one year in small claims court (Section c) or in arbitration (Section d). The one-year period begins when the claim or dispute first could be filed. If such a claim or dispute is not filed within one year, it is permanently barred.
(I) Severability. If the class action waiver (Section e) is found to be illegal or unenforceable as to all or some parts of a dispute, then that portion of Section e will not apply to those parts. Instead, those parts will be severed and proceed in a court of law, with the remaining parts proceeding in arbitration. If any other provision of that portion Section e is found to be illegal or unenforceable, that provision will be severed with the remainder of Section e remaining in full force and effect.
Telenav Software End User License Agreement
Please read these terms and conditions carefully before you use the TeleNav Software. Your use of the TeleNav Software indicates that you accept these terms and conditions. If you do not accept these terms and conditions, do not break the seal of the package, launch, or otherwise use the TeleNav Software. TeleNav may revise this Agreement and the privacy policy at any time, with or without notice to you. You agree to visit http://www.telenav.com from time to time to review the then current version of this Agreement and of the privacy policy.
1. Safe and Lawful Use
You acknowledge that devoting attention to the TeleNav Software may pose a risk of injury or death to you and others in situations that otherwise require your undivided attention, and you therefore agree to comply with the following when using the TeleNav Software:
(a) observe all traffic laws and otherwise drive safely;
(b) use your own personal judgment while driving. If you feel that a route suggested by the TeleNav Software instructs you to perform an unsafe or illegal maneuver, places you in an unsafe situation, or directs you into an area that you consider to be unsafe, do not follow such instructions;
(c) do not input destinations, or otherwise manipulate the TeleNav Software, unless your vehicle is stationary and parked;
(d) do not use the TeleNav Software for any illegal, unauthorized, unintended, unsafe, hazardous, or unlawful purposes, or in any manner inconsistent with this Agreement;
(e) arrange all GPS and wireless devices and cables necessary for use of the TeleNav Software in a secure manner in your vehicle so that they will not interfere with your driving and will not prevent the operation of any safety device (such as an airbag).
You agree to indemnify and hold TeleNav harmless against all claims resulting from any dangerous or otherwise inappropriate use of the TeleNav Software in any moving vehicle, including as a result of your failure to comply with the directions above.
484
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
2. Account Information
You agree: (a) when registering the TeleNav Software, to provide TeleNav with true, accurate, current, and complete information about yourself, and (b) to inform TeleNav promptly of any changes to such information, and to keep it true, accurate, current and complete.
3. Software License
· Subject to your compliance with the terms of this Agreement, TeleNav hereby grants to you a personal, non-exclusive, non-transferable license (except as expressly permitted below in connection with your permanent transfer of the TeleNav Software license), without the right to sublicense, to use the TeleNav Software (in object code form only) in order to access and use the TeleNav Software. This license shall terminate upon any termination or expiration of this Agreement. You agree that you will use the TeleNav Software only for your personal business or leisure purposes, and not to provide commercial navigation services to other parties.
3.1 License Limitations
· (a) reverse engineer, decompile, disassemble, translate, modify, alter or otherwise change the TeleNav Software or any part thereof; (b) attempt to derive the source code, audio library or structure of the TeleNav Software without the prior express written consent of TeleNav; (c) remove from the TeleNav Software, or alter, any of TeleNav's or its suppliers' trademarks, trade names, logos, patent or copyright notices, or other notices or markings; (d)
distribute, sublicense or otherwise transfer the TeleNav Software to others, except as part of your permanent transfer of the TeleNav Software; or (e) use the TeleNav Software in any manner that
I. infringes the intellectual property or proprietary rights, rights of publicity or privacy or other rights of any party,
ii. violates any law, statute, ordinance or regulation, including but not limited to laws and regulations related to spamming, privacy, consumer and child protection, obscenity or defamation, or
iii. is harmful, threatening, abusive, harassing, tortuous, defamatory, vulgar, obscene, libelous, or otherwise objectionable; and (f) lease, rent out, or otherwise permit unauthorized access by third parties to the TeleNav Software without advanced written permission of TeleNav.
4. Disclaimers
· To the fullest extent permissible pursuant to applicable law, in no event will TeleNav, its licensors and suppliers, or agents or employees of any of the foregoing, be liable for any decision made or action taken by you or anyone else in reliance on the information provided by the TeleNav Software. TeleNav also does not warrant the accuracy of the map or other data used for the TeleNav Software. Such data may not always reflect reality due to, among other things, road closures, construction, weather, new roads and other changing conditions. You are responsible for the entire risk arising out of your use of the TeleNav Software. For example but without limitation, you agree not to rely on the TeleNav Software for critical navigation in areas where the well-being or survival of you or others
485
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
is dependent on the accuracy of navigation, as the maps or functionality of the TeleNav Software are not intended to support such high risk applications, especially in more remote geographical areas.
· TELENAV EXPRESSLY DISCLAIMS AND EXCLUDES ALL WARRANTIES IN CONNECTION WITH THE TELENAV SOFTWARE, WHETHER STATUTORY, EXPRESS OR IMPLIED, INCLUDING ALL WARRANTIES WHICH MAY ARISE FROM COURSE OF DEALING, CUSTOM OR TRADE AND INCLUDING, BUT NOT LIMITED TO, THE IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE AND NON-INFRINGEMENT OF THIRD PARTY RIGHTS WITH RESPECT TO THE TELENAV SOFTWARE.
· Certain jurisdictions do not permit the disclaimer of certain warranties, so this limitation may not apply to you.
5. Limitation of Liability
· TO THE EXTENT PERMITTED UNDER APPLICABLE LAW, UNDER NO CIRCUMSTANCES SHALL TELENAV OR ITS LICENSORS AND SUPPLIERS BE LIABLE TO YOU OR TO ANY THIRD PARTY FOR ANY INDIRECT, INCIDENTAL, CONSEQUENTIAL, SPECIAL OR EXEMPLARY DAMAGES (INCLUDING IN EACH CASE, BUT NOT LIMITED TO, DAMAGES FOR THE INABILITY TO USE THE EQUIPMENT OR ACCESS DATA, LOSS OF DATA, LOSS OF BUSINESS, LOSS OF PROFITS, BUSINESS INTERRUPTION OR THE LIKE) ARISING OUT OF THE USE OF OR INABILITY TO USE THE TELENAV SOFTWARE, EVEN IF TELENAV HAS BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. NOTWITHSTANDING ANY DAMAGES THAT YOU MIGHT INCUR FOR ANY
REASON WHATSOEVER (INCLUDING, WITHOUT LIMITATION, ALL DAMAGES REFERENCED HEREIN AND ALL DIRECT OR GENERAL DAMAGES IN CONTRACT, TORT (INCLUDING NEGLIGENCE) OR OTHERWISE), THE ENTIRE LIABILITY OF TELENAV AND OF ALL OF TELENAV'S SUPPLIERS SHALL BE LIMITED TO THE AMOUNT ACTUALLY PAID BY YOU FOR THE TELENAV SOFTWARE. SOME STATES AND/OR JURISDICTIONS DO NOT ALLOW THE EXCLUSION OR LIMITATION OF INCIDENTAL OR CONSEQUENTIAL DAMAGES, SO THE ABOVE LIMITATIONS OR EXCLUSIONS MAY NOT APPLY TO YOU.
6. Arbitration and Governing Law
· You agree that any dispute, claim or controversy arising out of or relating to this Agreement or the TeleNav Software shall be settled by independent arbitration involving a neutral arbitrator and administered by the American Arbitration Association in the County of Santa Clara, California. The arbitrator shall apply the Commercial Arbitration Rules of the American Arbitration Association, and the judgment upon the award rendered by the arbitrator may be entered by any court having jurisdiction. Note that there is no judge or jury in an arbitration proceeding and the decision of the arbitrator shall be binding upon both parties. You expressly agree to waive your right to a jury trial. This Agreement and performance hereunder will be governed by and construed in accordance with the laws of the State of California, without giving effect to its conflict of law provisions. To the extent judicial action is necessary in connection with the binding arbitration, both TeleNav and you agree to submit
486
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
to the exclusive jurisdiction of the courts of the County of Santa Clara, California. The United Nations Convention on Contracts for the International Sale of Goods shall not apply.
7. Assignment
· You may not resell, assign, or transfer this Agreement or any of your rights or obligations, except in totality, in connection with your permanent transfer of the TeleNav Software, and expressly conditioned upon the new user of the TeleNav Software agreeing to be bound by the terms and conditions of this Agreement. Any such sale, assignment or transfer that is not expressly permitted under this paragraph will result in immediate termination of this Agreement, without liability to TeleNav, in which case you and all other parties shall immediately cease all use of the TeleNav Software. Notwithstanding the foregoing, TeleNav may assign this Agreement to any other party at any time without notice, provided the assignee remains bound by this Agreement.
8. Miscellaneous
8.1
This Agreement constitutes the entire agreement between TeleNav and you with respect to the subject matter hereof.
8.2
Except for the limited licenses expressly granted in this Agreement, TeleNav retains all right, title and interest in and to the TeleNav Software, including without limitation all related intellectual property rights. No licenses or other rights which are not expressly granted in this Agreement are intended to, or shall be, granted or
conferred by implication, statute, inducement, estoppel or otherwise, and TeleNav and its suppliers and licensors hereby reserve all of their respective rights other than the licenses explicitly granted in this Agreement.
8.3
By using the TeleNav Software, you consent to receive from TeleNav all communications, including notices, agreements, legally required disclosures or other information in connection with the TeleNav Software (collectively, "Notices") electronically. TeleNav may provide such Notices by posting them on TeleNav's Website or by downloading such Notices to your wireless device. If you desire to withdraw your consent to receive Notices electronically, you must discontinue your use of the TeleNav Software.
8.4
TeleNav's or your failure to require performance of any provision shall not affect that party's right to require performance at any time thereafter, nor shall a waiver of any breach or default of this Agreement constitute a waiver of any subsequent breach or default or a waiver of the provision itself.
8.5
If any provision herein is held unenforceable, then such provision will be modified to reflect the intention of the parties, and the remaining provisions of this Agreement will remain in full force and effect.
487
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
8.6
The headings in this Agreement are for convenience of reference only, will not be deemed to be a part of this Agreement, and will not be referred to in connection with the construction or interpretation of this Agreement. As used in this Agreement, the words "include" and "including" and variations thereof, will not be deemed to be terms of limitation, but rather will be deemed to be followed by the words "without limitation".
9. Other Vendors Terms and Conditions
· The Telenav Software utilizes map and other data licensed to Telenav by third party vendors for the benefit of you and other end users. This Agreement includes end-user terms applicable to these companies (included at the end of this Agreement), and thus your use of the Telenav Software is also subject to such terms. You agree to comply with the following additional terms and conditions, which are applicable to Telenav's third party vendor licensors::
9.1 End User Terms Required by HERE North America, LLC
The data ("Data") is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and Telenav ("Telenav") and its licensors (including their licensors and suppliers) on the other hand.
© 2013 HERE. All rights reserved.
The Data for areas of Canada includes information taken with permission from Canadian authorities, including: © Her Majesty the Queen in Right of Canada, © Queen's Printer for Ontario, © Canada Post Corporation, GeoBase®, © Department of Natural Resources Canada.
HERE holds a non-exclusive license from the United States Postal Service® to publish and sell ZIP+4® information.
©United States Postal Service® 2014. Prices are not established, controlled or approved by the United States Postal Service®. The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4
The Data for Mexico includes certain data from Instituto Nacional de Estadística y Geografía.
9.2 End User Terms Required by NAV2 (Shanghai) Co., Ltd
The data ("Data") is provided for your personal, internal use only and not for resale. It is protected by copyright, and is subject to the following terms and conditions which are agreed to by you, on the one hand, and NAV2 (Shanghai) Co., Ltd ("NAV2") and its licensors (including their licensors and suppliers) on the other hand. 20xx. All rights reserved
Terms and Conditions
Permitted Use. You agree to use this Data together with the Telenav Software solely for the internal business and personal purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes. Accordingly, but subject to the restrictions set forth in the following paragraphs, you agree not to otherwise reproduce, copy, modify, decompile, disassemble, create any derivative works of, or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws.
488
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
Restrictions. Except where you have been specifically licensed to do so by Telenav, and without limiting the preceding paragraph, you may not use this Data (a) with any products, systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet management or similar applications; or (b) with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs.
Warning. The Data may contain inaccurate or incomplete information due to the passage of time, changing circumstances, sources used and the nature of collecting comprehensive geographic data, any of which may lead to incorrect results.
No Warranty. This Data is provided to you "as is," and you agree to use it at your own risk. Telenav and its licensors (and their licensors and suppliers) make no guarantees, representations or warranties of any kind, express or implied, arising by law or otherwise, including but not limited to, content, quality, accuracy, completeness, effectiveness, reliability, fitness for a particular purpose, usefulness, use or results to be obtained from this Data, or that the Data or server will be uninterrupted or error-free.
Disclaimer of Warranty: TELENAV AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A
PARTICULAR PURPOSE OR NON-INFRINGEMENT. Some States, Territories and Countries do not allow certain warranty exclusions, so to that extent the above exclusion may not apply to you.
Disclaimer of Liability: TELENAV AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION; OR FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFORMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF TELENAV OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. Some States, Territories and Countries do not allow certain liability exclusions or damages limitations, so to that extent the above may not apply to you.
Export Control. You shall not export from anywhere any part of the Data or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations, including but not limited to the laws, rules and regulations administered by the Office of Foreign Assets Control of the U.S. Department of Commerce and the Bureau of Industry and Security of the U.S. Department of Commerce. To the extent that any such
489
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
export laws, rules or regulations prohibit HERE from complying with any of its obligations hereunder to deliver or distribute Data, such failure shall be excused and shall not constitute a breach of this Agreement.
Entire Agreement. These terms and conditions constitute the entire agreement between Telenav (and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter.
Governing Law. The above terms and conditions shall be governed by the laws of the State of Illinois [insert "Netherlands" where European HERE Data is used], without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. You agree to submit to the jurisdiction of the State of Illinois [insert "The Netherlands" where European HERE Data is used] for any and all disputes, claims and actions arising from or in connection with the Data provided to you hereunder.
Government End Users. If the Data is being acquired by or on behalf of the United States government or any other entity seeking or applying rights similar to those customarily claimed by the United States government, this Data is a "commercial item" as that term is defined at 48 C.F.R. ("FAR") 2.101, is licensed in accordance with these End-User Terms, and each copy of Data delivered or otherwise furnished shall be marked and embedded as appropriate with the following "Notice of Use," and shall be treated in accordance with such Notice:
NOTICE OF USE
CONTRACTOR (MANUFACTURER/ SUPPLIER) NAME: HERE
CONTRACTOR (MANUFACTURER/ SUPPLIER) ADDRESS: c/o Nokia, 425 West Randolph Street, Chicago, Illinois
60606
This Data is a commercial item as defined in FAR 2.101 and is subject to these End-User Terms under which this
Data was provided.
© 1987 2014 HERE All rights reserved.
If the Contracting Officer, federal government agency, or any federal official refuses to use the legend provided herein, the Contracting Officer, federal government agency, or any federal official must notify HERE prior to seeking additional or alternative rights in the Data.
I. US/Canada Territory
A. United States Data. The End-User Terms for any Application containing Data for the United States shall contain the following notices:
"HERE holds a non-exclusive license from the United States Postal Service® to publish and sell ZIP+4® information."
"©United States Postal Service® 20XX. Prices are not established, controlled or approved by the United States Postal Service®. The following trademarks and registrations are owned by the USPS: United States Postal Service, USPS, and ZIP+4."
490
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
B. Canada Data. The following provisions apply to the Data for Canada, which may include or reflect data from third party licensors ("Third Party Data"), including Her Majesty the Queen in Right of Canada ("Her Majesty"), Canada Post Corporation ("Canada Post") and the Department of Natural Resources of Canada ("NRCan"):
1. Disclaimer and Limitation: Client agrees that its use of the Third Party Data is subject to the following provisions:
a. Disclaimer: The Third Party Data is licensed on an "as is" basis. The licensors of such data, including Her Majesty, Canada Post and NRCan, make no guarantees, representations or warranties respecting such data, either express or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose.
b. Limitation on Liability: The Third Party Data licensors, including Her Majesty, Canada Post and NRCan, shall not be liable: (i) in respect of any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action alleging any loss, injury or damages, direct or indirect, which may result from the use or possession of such Data; or (ii) in any way for loss of revenues or contracts, or any other consequential loss of any kind resulting from any defect in the Data.
2. Copyright Notice: In connection with each copy of all or any portion of the Data for the Territory of Canada, Client shall affix in a conspicuous manner the following copyright notice on at least one of: (i) the label for the storage media of the copy; (ii) the packaging for the copy; or (iii) other materials packaged with the copy, such as user manuals or end user license agreements: "This data includes information taken with permission from Canadian authorities, including © Her Majesty the Queen in Right of Canada, © Queen's Printer for Ontario, © Canada Post Corporation, GeoBase®, © The Department of Natural Resources Canada. All rights reserved."
3. End-User Terms: Except as otherwise agreed by the parties, in connection with the provision of any portion of the Data for the Territory of Canada to End-Users as may be authorized under the Agreement, Client shall provide such End-Users, in a reasonably conspicuous manner, with terms (set forth with other end user terms required to be provided under the Agreement, or as otherwise may be provided, by Client) which shall include the following provisions on behalf of the Third Party Data licensors, including Her Majesty, Canada Post and NRCan:
The Data may include or reflect data of licensors, including Her Majesty the Queen in the Right of Canada ("Her Majesty"), Canada Post Corporation ("Canada Post") and the Department of Natural Resources Canada ("NRCan"). Such data is licensed on an "as is" basis. The licensors, including Her Majesty, Canada Post and NRCan, make no guarantees, representations or warranties respecting such data,
491
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
either express or implied, arising by law or otherwise, including but not limited to, effectiveness, completeness, accuracy or fitness for a particular purpose. The licensors, including Her Majesty, Canada Post and NRCan, shall not be liable in respect of any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action alleging any loss, injury or damages, direct or indirect, which may result from the use or possession of the data or the Data. The licensors, including Her Majesty, Canada Post and NRCan, shall not be liable in any way for loss of revenues or contracts, or any other consequential loss of any kind resulting from any defect in the data or the Data. End User shall indemnify and save harmless the licensors, including Her Majesty, Canada Post and NRCan, and their officers, employees and agents from and against any claim, demand or action, irrespective of the nature of the cause of the claim, demand or action, alleging loss, costs, expenses, damages or injuries (including injuries resulting in death) arising out of the use or possession of the data or the Data.
4. Additional Provisions: The terms contained in this Section are in addition to all of the rights and obligations of the parties under the Agreement. To the extent that any of the provisions of this Section are inconsistent with, or conflict with, any other provisions of the Agreement, the provisions of this Section shall prevail.
II. Mexico. The following provision applies to the Data for Mexico, which includes certain data from the Instituto Nacional de Estadística y Geografía ("INEGI"):
A. Any and all copies of the Data and/or packaging containing Data for Mexico shall contain the following notice: "Fuente: INEGI (Instituto Nacional de Estadística y Geografía)"
III. Latin America Territory
A. Third Party Notices. Any and all copies of the Data and/or packaging relating thereto shall include the respective Third Party Notices set forth below and used as described below corresponding to the Territory (or portion thereof) included in such copy:
Territory Notice
Ecuador
"INSTITUTO GEOGRAFICO MILITAR DEL ECUADOR AUTORIZACION N° IGM2011-01- PCO-01 DEL 25 DE ENERO DE 2011" "source: © IGN 2009 - BD TOPO ®"
Guadeloupe, French Guiana and Martinique Mexico
"Fuente: INEGI (Instituto Nacional de Estadística y Geografía)"
IV. Middle East Territory
492
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
A. Third Party Notices. Any and all copies of the Data and/or packaging relating thereto shall include the respective Third Party Notices set forth below and used as described below corresponding to the Territory (or portion thereof) included in such copy:
Country Notice
Jordan
"© Royal Jordanian Geographic Centre". The foregoing notice requirement for Jordan Data is a material term of the Agreement. If Client or any of its permitted sublicensees (if any) fail to meet such requirement, HERE shall have the right to terminate Client's license with respect to the Jordan Data.
B. Jordan Data. Client and its permitted sublicensees (if any) are restricted from licensing and/or otherwise distributing HERE's database for the country of Jordan ("Jordan Data") for use in Enterprise Applications to (i) non-Jordanian entities for use of the Jordan Data solely in Jordan or (ii) Jordan-based customers. In addition, Client, its permitted sublicensees (if any) and End-Users are restricted from using the Jordan Data in Enterprise Applications if such party is (i) a non-Jordanian entity using the Jordan Data solely in Jordan or (ii) a Jordan-based customer. For purposes of the foregoing, "Enterprise Applications" shall mean Geomarketing applications, GIS applications, mobile business asset management applications, call center applications, telematics applications, public organization Internet applications or for providing geocoding services.
V. Europe Territory
A. Use of Certain Traffic Codes in Europe
1. General Restrictions Applicable to Traffic Codes. Client acknowledges and agrees that in certain countries of the Europe Territory, Client will need to obtain rights directly from third party RDS-TMC code providers to receive and use the Traffic Codes in the Data and to deliver to End-Users Transactions in any way derived from or based on such Traffic Codes. For such countries, HERE shall deliver the Data incorporating Traffic Codes to Client only after receiving certification from Client of its having obtained such rights.
2. Display of Third Party Rights Legends for Belgium. Client shall, for each Transaction that uses Traffic Codes for Belgium, provide the following notice to the End-User: "Traffic Codes for Belgium are provided by the Ministerie van de Vlaamse Gemeenschap and the Ministèrie de l'Equipement et des Transports."
B. Paper Maps. With respect to any license granted to Client relating to making, selling or distributing paper maps (i.e., a map fixed on a paper or paper-like medium): (a) such license with respect to Data for the Territory of Great Britain is conditioned on Client's entering into and complying with a separate written agreement with the Ordnance Survey ("OS") to create and sell paper maps, Client's paying to the OS any and all applicable paper map royalties, and Client's complying with the OS copyright notice requirements; (b) such license for selling or otherwise distributing for charge with respect to Data for the Territory of Czech Republic
493
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
is conditioned on Client's obtaining prior written consent from Kartografie a.s.; (c) such license for selling or distributing with respect to Data for the Territory of Switzerland is conditioned on Client's obtaining a permit from Bundesamt für Landestopografie of Switzerland; (d) Client is restricted from using Data for the Territory of France to create paper maps with a scale between 1:5,000 and 1:250,000; and (e) Client is restricted from using any Data to create, sell or distribute paper maps that are the same or substantially similar, in terms of data content and specific use of color, symbols and scale, to paper maps published by the European national mapping agencies, including without limitation, Landervermessungämter of Germany, Topografische Dienst of the Netherlands, Nationaal Geografisch Instituut of Belgium, Bundesamt für Landestopografie of Switzerland, Bundesamt für Eich-und Vermessungswesen of Austria, and the National Land Survey of Sweden.
C. OS Enforcement. Without limiting Section IV(B) above, with respect to Data for the Territory of Great Britain, Client acknowledges and agrees that the Ordnance Survey ("OS") may bring a direct action against Client to enforce compliance with the OS copyright notice (see Section IV(D) below) and paper map requirements (see Section IV(B) above) contained in this Agreement.
D. Third Party Notices. Any and all copies of the Data and/or packaging relating thereto shall include the respective Third Party Notices set forth below and used as described below corresponding to the Territory (or portion thereof) included in such copy:
Country(ies) Notice
Austria
"© Bundesamt für Eichund Vermessungswesen"
Croatia Cyprus, Estonia, Latvia, Lithuania, Moldova, Poland, Slovenia and/or Ukraine
"© EuroGeographics"
France
"source: © IGN 2009 BD TOPO ®"
Germany
"Die Grundlagendaten wurden mit Genehmigung der zuständigen Behörden entnommen"
Great Britain "Contains Ordnance Survey data © Crown copyright and database right 2010 Contains Royal Mail data © Royal Mail copyright and database right 2010"
Greece
"Copyright Geomatics Ltd."
Hungary
"Copyright © 2003; TopMap Ltd."
Italy
"La Banca Dati Italiana è stata prodotta usando quale riferimento anche cartografia numerica ed al tratto prodotta e fornita dalla Regione Toscana."
Norway
"Copyright © 2000; Norwegian Mapping Authority"
Portugal "Source: IgeoE Portugal"
494
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
Spain
"Información geográfica propiedad del CNIG"
Sweden
"Based upon electronic data © National Land Survey Sweden."
Switzerland "Topografische Grundlage: © Bundesamt für Landestopographie.
E. Respective Country Distribution. Client acknowledges that HERE has not received approvals to distribute map data for the following countries in such respective countries: Albania, Belarus, Kyrgyzstan, Moldova and Uzbekistan. HERE may update such list from time to time. The license rights granted to Client under this TL with respect to the Data for such countries are contingent upon Client's compliance with all applicable laws and regulations, including, without limitation, any required licenses or approvals to distribute the Application incorporating such Data in such respective countries.
VI. Australia Territory
A. Third Party Notices. Any and all copies of the Data and/or packaging relating thereto shall include the respective Third Party Notices set forth below and used as described below corresponding to the Territory (or portion thereof) included in such copy:
Copyright. Based on data provided under license from PSMA Australia Limited (www.psma.com.au).
Product incorporates data which is © 20XX Telstra Corporation Limited, GM Holden Limited, Intelematics Australia Pty Ltd and Continental Pty Ltd.
B. Third Party Notices for Australia. In addition to the foregoing, the End-User Terms for any Application containing RDS-TMC Traffic Codes for Australia shall contain the following notice: "Product incorporates traffic location codes which is © 20XX Telstra Corporation Limited and its licensors."
AT&T Vehicle Network Carrier Telematics Disclosure
END USER FOR PURPOSES OF THIS SECTION MEANS YOU AND YOUR HEIRS, EXECUTORS, LEGAL PERSONAL REPRESENTATITVES AND PERMITED ASSIGNS. FOR PURPOSES OF THIS SECTION "UNDERLYING WIRELESS SERVICE CARRIER" INCLUDES ITS AFFILIATES AND CONTRACTORS AND THEIR RESPECTIVE OFFICERS, DIRECTORS, EMPLOYEES, SUCCESSORS AND ASSIGNS. END USER HAS NO CONTRACTUAL RELATIONSHIP WITH THE UNDERLYING WIRELESS SERVICE CARRIER AND END USER IS NOT A THIRD PARTY BENEFICIARY OF ANY AGREEMENT BETWEEN FORD AND UNDERLYING CARRIER. END USER UNDERSTANDS AND AGREES THAT THE UNDERLYING CARRIER HAS NO LEGAL, EQUITABLE, OR OTHER LIABILITY OF ANY KIND TO END USER. IN ANY EVENT, REGARDLESS OF THE FORM OF THE ACTION, WHETHER FOR BREACH OF CONTRACT, WARRANTY, NEGLIGENCE, STRICT LIABILITY IN TORT OR OTHERWISE, END USER'S EXCLUSIVE REMEDY FOR CLAIMS ARISING IN ANY WAY IN CONNECTION WITH THIS AGREEMENT, FOR ANY CAUSE WHATSOEVER, INCLUDING BUT NOT LIMITED TO ANY FAILURE OR
495
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
DISRUPTION OF SERVICE PROVIDED HEREUNDER, IS LIMITED TO PAYMENT OF DAMAGES IN AN AMOUNT NOT TO EXCEED THE AMOUNT PAID BY END USER FOR THE SERVICES DURING THE TWO-MONTH PERIOD PRECEDING THE DATE THE CLAIM AROSE.
(ii) END USER AGREES TO INDEMNIFY AND HOLD HARMLESS THE UNDERLYING WIRELESS SERVICE CARRIER AND ITS OFFICERS, EMPLOYEES, AND AGENTS AGAINST ANY AND ALL CLAIMS, INCLUDING WITHOUT LIMITATION CLAIMS FOR LIBEL, SLANDER, OR ANY PROPERTY DAMAGE, PERSONAL INJURY OR DEATH, ARISING IN ANY WAY, DIRECTLY OR INDIRECTLY, IN CONNECTION WITH THIS AGREEMENT OR THE USE, FAILURE TO USE, OR INABILITY TO USE THE DEVICE EXCEPT WHERE THE CLAIMS RESULT FROM THE UNDERLYING CARRIER'S GROSS NEGLIGENCE OR WILLFUL MISCONDUCT. THIS INDEMNITY WILL SURVIVE THE TERMINATION OF THE AGREEMENT.
(iii) END USER HAS NO PROPERTY RIGHT IN ANY NUMBER ASSIGNED TO THE DEVICE.
(iv) END USER UNDERSTANDS THAT FORD AND THE UNDERLYING CARRIER CANNOT GUARANTY THE SECURITY OF WIRELESS TRANSMISSIONS, AND WILL NOT BE LIABLE FOR ANY LACK OF SECURITY RELATING TO THE USE OF THE SERVICES
THE SERVICE IS FOR [END USER'S] USE ONLY AND END USER MAY NOT RESELL THE SERVICE TO ANY OTHER PARTY END USER UNDERSTANDS THAT THE UNDERLYING CARRIER DOES NOT GUARANTEE ANY END USER UNINTERRUPTED SERVICE OR COVERAGE. THE UNDERLYING CARRIER DOES NOT WARRANT THAT END USERS CAN OR WILL BE LOCATED USING THE SERVICE. THE UNDERLYING CARRIER
MAKES NO WARRANTY, EXPRESS OR IMPLIED, OF MERCHANTABILITY OR FITNESS FOR A PARTICULAR PURPOSE, SUITABILITY, OR PERFORMANCE REGARDING ANY SERVICES OR GOODS, AND IN NO EVENT SHALL AT&T BE LIABLE, WHETHER OR NOT DUE TO ITS OWN NEGLIGENCE, FOR ANY: (A) ACT OR OMISSION OF A THIRD PARTY; (B) MISTAKES, OMISSIONS, INTERRUPTIONS, ERRORS, FAILURES TO TRANSMIT, DELAYS, OR DEFECTS IN THE SERVICE PROVIDED BY OR THROUGH THE UNDERLYING CARRIER; (C) DAMAGE OR INJURY CAUSED BY SUSPENSION OR TERMINATION BY THE UNDERLYING CARRIER; OR (D) DAMAGE OR INJURY CAUSED BY A FAILURE OR DELAY IN CONNECTING A CALL TO ANY ENTITY, INCLUDING 911 OR ANY OTHER EMERGENCY SERVICE. TO THE FULL EXTENT ALLOWED BY LAW, THE END USER RELEASES, INDEMNIFIES AND HOLDS THE UNDERLYING CARRIER HARMLESS FROM AND AGAINST ANY AND ALL CLAIMS OF ANY PERSON OR ENTITY FOR DAMAGES OF ANY NATURE ARISING IN ANY WAY FROM OR RELATING TO, DIRECTLY OR INDIRECTLY, SERVICES PROVIDED BY THE UNDERLYING CARRIER OR ANY PERSON'S USE THEREOF, INCLUDING CLAIMS ARISING IN WHOLE OR IN PART FROM THE ALLEGED NEGLIGENCE OF THE UNDERLYING CARRIER.
VII. China Territory
Personal Use Only
You agree to use this Data together with [insert name of Client Application] for the solely personal, non-commercial purposes for which you were licensed, and not for service bureau, time-sharing or other similar purposes. Accordingly, but subject to the restrictions set forth in the following paragraphs, you may copy this Data only as necessary for your personal use to (i)
496
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
view it, and (ii) save it, provided that you do not remove any copyright notices that appear and do not modify the Data in any way. You agree not to otherwise reproduce, copy, modify, decompile, disassemble or reverse engineer any portion of this Data, and may not transfer or distribute it in any form, for any purpose, except to the extent permitted by mandatory laws.
Restrictions
Except where you have been specifically licensed to do so by NAV2 , and without limiting the preceding paragraph, you may not (a) use this Data with any products, systems, or applications installed or otherwise connected to or in communication with vehicles, capable of vehicle navigation, positioning, dispatch, real time route guidance, fleet management or similar applications; or (b) with or in communication with any positioning devices or any mobile or wireless-connected electronic or computer devices, including without limitation cellular phones, palmtop and handheld computers, pagers, and personal digital assistants or PDAs. You agree to cease using this Data if you fail to comply with these terms and conditions.
Limited Warranty
NAV2 warrants that (a) the Data will perform substantially in accordance with the accompanying written materials for a period of ninety (90) days from the date of receipt, and (b) any support services provided by NAV2 shall be substantially as described in applicable written materials provided to you by NAV2, and NAV2's support engineers will make commercially reasonable efforts to solve any problem issues.
rigCustomer Remedies
NAV2 and its suppliers' entire liability and your exclusive remedy shall be, at NAV2's sole discretion, either (a) return of the price paid, if any, or (b) repair or replacement of the Data that do not meet NAV2's Limited Warranty and that are returned to NAV2 with a copy of your receipt. This Limited Warranty is void if failure of the Data has resulted from accident, abuse, or misapplication. Any replacement Data will be warranted for the remainder of the original warranty period or thirty (30) days, whichever is longer. Neither these remedies nor any product support services offered by NAV2 are available without proof of purchase from an authorized international source.
No Other Warranty:
EXCEPT FOR THE LMITED WARRANTY SET FORTH ABOVE AND TO THE EXTENT PERMITTED BY APPLICABLE LAW, NAV2 AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) DISCLAIM ANY WARRANTIES, EXPRESS OR IMPLIED, OF QUALITY, PERFORMANCE, MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, OWNERSHIP OR NON-INFRINGEMENT. Certain warranty exclusions may not be permitted under applicable law, so to that extent the above exclusion may not apply to you.
Limited Liability:
TO THE EXTENT PERMITTED BY APPLICABLE LAW, NAV2 AND ITS LICENSORS (INCLUDING THEIR LICENSORS AND SUPPLIERS) SHALL NOT BE LIABLE TO YOU: IN RESPECT OF ANY CLAIM, DEMAND OR ACTION, IRRESPECTIVE OF THE NATURE OF THE CAUSE OF THE CLAIM, DEMAND OR ACTION ALLEGING ANY LOSS, INJURY OR DAMAGES, DIRECT OR INDIRECT, WHICH MAY RESULT FROM THE USE OR POSSESSION OF THE INFORMATION; OR
497
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
FOR ANY LOSS OF PROFIT, REVENUE, CONTRACTS OR SAVINGS, OR ANY OTHER DIRECT, INDIRECT, INCIDENTAL, SPECIAL OR CONSEQUENTIAL DAMAGES ARISING OUT OF YOUR USE OF OR INABILITY TO USE THIS INFORMATION, ANY DEFECT IN THE INFROMATION, OR THE BREACH OF THESE TERMS OR CONDITIONS, WHETHER IN AN ACTION IN CONTRACT OR TORT OR BASED ON A WARRANTY, EVEN IF NAV2 OR ITS LICENSORS HAVE BEEN ADVISED OF THE POSSIBILITY OF SUCH DAMAGES. UNDER NO CIRCUMSTANCES SHALL NAV2's OR ITS SUPPLIERS' LIABILITY HEREUNDER EXCEED THE PRICE PAID. Certain liability exclusions may not be permitted under applicable law, so to that extent the above exclusion may not apply to you.
Export Control
You agree not to export to anywhere any part of the Data provided to you or any direct product thereof except in compliance with, and with all licenses and approvals required under, applicable export laws, rules and regulations.
IP Protection
The Data are owned by NAV2 or its suppliers and are protected by applicable copyright and other intellectual property law and treaties. The Data are provided solely on the basis of a license to use, not sale.
Entire Agreement
These terms and conditions constitute the entire agreement between NAV2(and its licensors, including their licensors and suppliers) and you pertaining to the subject matter hereof, and supersedes in their entirety any and all written or oral agreements previously existing between us with respect to such subject matter.
Governing Law.
The above terms and conditions shall be governed by the laws of the People's Republic of China, without giving effect to (i) its conflict of laws provisions, or (ii) the United Nations Convention for Contracts for the International Sale of Goods, which is explicitly excluded. Any dispute arising from or in connection with the Data provided to you hereunder shall be submitted to the Shanghai International Economic and Trade Arbitration Commission for arbitration.
Gracenote® Copyright
CD and music-related data from Gracenote, Inc., copyright©
2000-2007 Gracenote. Gracenote Software, copyright © 2000-2007 Gracenote. This product and service may practice one or more of the following U.S. Patents 5,987,525; 6,061,680; 6,154,773; 6,161,132; 6,230,192; 6,230,207; 6.240,459; 6,330,593 and other patents issued or pending. Some services supplied under license from Open Globe, Inc. for U.S. Patent 6,304,523.
Gracenote and CDDB are registered trademarks of Gracenote. The Gracenote logo and logotype, and the "Powered by GracenoteTM" logo are trademarks of Gracenote.
Gracenote® End User License Agreement (EULA)
This device contains software from Gracenote, Inc. of 2000 Powell Street Emeryville, California 94608 ("Gracenote").
The software from Gracenote (the "Gracenote Software") enables this device to do disc and music file identification and obtain music-related information, including name, artist, track, and title information ("Gracenote Data") from online servers
498
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
("Gracenote Servers"), and to perform other functions. You may use Gracenote Data only by means of the intended End User functions of this device. This device may contain content belonging to Gracenote's providers. If so, all of the restrictions set forth herein with respect to Gracenote Data shall also apply to such content and such content providers shall be entitled to all of the benefits and protections set forth herein that are available to Gracenote. You agree that you will use the content from Gracenote ("Gracenote Content") , Gracenote Data, the Gracenote Software, and Gracenote Servers for your own personal, non-commercial use only. You agree not to assign, copy, transfer or transmit the Gracenote Content, Gracenote Software or any Gracenote Data (except in a Tag associated with a music file) to any third party. YOU AGREE NOT TO USE OR EXPLOIT GRACENOTE CONTENT, GRACENOTE DATA, THE GRACENOTE SOFTWARE, OR GRACENOTE SERVERS, EXCEPT AS EXPRESSLY PERMITTED HEREIN.
You agree that your non-exclusive licenses to use the Gracenote Content, Gracenote Data, the Gracenote Software, and Gracenote Servers will terminate if you violate these restrictions. If your licenses terminate, you agree to cease any and all use of the Gracenote Content, Gracenote Data, the Gracenote Software, and Gracenote Servers.
Gracenote, respectively, reserve all rights in Gracenote Data, the Gracenote Software, and the Gracenote Servers and Gracenote Content, including all ownership rights. Under no circumstances will either Gracenote become liable for any payment to you for any information that you provide,
including any copyrighted material or music file information. You agree that Gracenote may enforce its respective rights, collectively or separately, under this agreement against you, directly in each company's own name.
Gracenote uses a unique identifier to track queries for statistical purposes. The purpose of a randomly assigned numeric identifier is to allow Gracenote to count queries without knowing anything about who you are. For more information, see the web page at www.gracenote.com for the Gracenote Privacy Policy.
THE GRACENOTE SOFTWARE, EACH ITEM OF GRACENOTE DATA AND THE GRACENOTE CONTENT ARE LICENSED TO YOU "AS IS". NEITHER GRACENOTE MAKES ANY REPRESENTATIONS OR WARRANTIES, EXPRESS OR IMPLIED, REGARDING THE ACCURACY OF ANY GRACENOTE DATA FROM THE GRACENOTE SERVERS OR GRACENOTE CONTENT. GRACENOTE COLLECTIVELY AND SEPARATELY RESERVE THE RIGHT TO DELETE DATA AND/OR CONTENT FROM THE COMPANIES' RESPECTIVE SERVERS OR, IN THE CASE OF GRACENOTE, CHANGE DATA CATEGORIES FOR ANY CAUSE THAT GRACENOTE DEEMS SUFFICIENT. NO WARRANTY IS MADE THAT EITHER GRACENOTE CONTENT OR THE GRACENOTE SOFTWARE OR GRACENOTE SERVERS ARE ERROR-FREE OR THAT THE FUNCTIONING OF THE GRACENOTE SOFTWARE OR GRACENOTE SERVERS WILL BE UNINTERRUPTED. GRACENOTE IS NOT OBLIGATED TO PROVIDE YOU WITH ANY ENHANCED OR ADDITIONAL DATA TYPES THAT GRACENOTE MAY CHOOSE TO PROVIDE IN THE FUTURE AND IS FREE TO DISCONTINUE ITS ONLINE SERVICES AT ANY TIME. GRACENOTE DISCLAIM ALL WARRANTIES EXPRESS OR IMPLIED, INCLUDING, BUT NOT LIMITED TO,
499
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
IMPLIED WARRANTIES OF MERCHANTABILITY, FITNESS FOR A PARTICULAR PURPOSE, TITLE, AND NON-INFRINGEMENT. NEITHER GRACENOTE WARRANTS THE RESULTS THAT WILL BE OBTAINED BY YOUR USE OF THE GRACENOTE SOFTWARE OR ANY GRACENOTE SERVER. IN NO CASE WILL GRACENOTE BE LIABLE FOR ANY CONSEQUENTIAL OR INCIDENTAL DAMAGES OR FOR ANY LOST PROFITS OR LOST REVENUES FOR ANY REASON WHATSOEVER. © Gracenote 2007.
Radio Frequency Statement
FCC ID: ACJ-SYNCG3-L
IC: 216B-SYNCG3-L
This device complies with Part 15 of the FCC Rules and with RSS-210 of Industry Canada. Operation is subject to the following two conditions:
(1) This device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that may cause undesired operation.
WARNING
Changes or modifications not expressively approved by the party responsible for compliance could void the user's authority to operate the equipment. The term "IC:" before the radio certification number only signifies that Industry Canada technical specifications were met.
The antenna used for this transmitter must not be co-located or operating in conjunction with any other antenna or transmitter.
Taiwan Territory
Note: In accordance with the management approach of low-power radio wave radiation motors:
Article 12: For approved and certified low-power radiation motor models, companies, firms or users must not alter the frequency, increase the power or change the characteristics and functions of the original design without authorization.
Article 14: The usage of low-power radio-frequency motors must not affect aviation safety and interfere with legal telecommunications. Should interference be detected, immediately stop using the device and only resume usage after ensuring that there is no longer any interference. For the legal telecommunication and wireless telecommunication of the telco, the low-power radio frequency motor must be able to tolerate legal limits of interference from telecommunication, industrial, scientific and radio wave equipment.
SUNA TRAFFIC CHANNEL TERMS AND CONDITIONS
By activating, using and/or accessing the SUNA Traffic Channel, SUNA Predictive or other content or material provided by Intelematics (together, SUNA Products and/or Services), you must accept certain terms and conditions. The following is a brief summary of the terms and conditions that apply to you. To view the full terms and conditions relevant to your use of the SUNA Products and/or Services, please consult:
Website
www.sunatraffic.com.au/termsandconditions/
1. Acceptance
500
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
By using SUNA Products and/or Services, you will be deemed to have accepted and agreed to be bound by the terms and conditions fully detailed at:
Website
www.sunatraffic.com.au/termsandconditions/
2. Intellectual Property
SUNA Products and/or Services are for your personal use. You may not record, or retransmit the content, nor use the content in association with any other traffic information or route guidance service or device not approved by Intelematics. You obtain no right of ownership in any Intellectual Property Rights (including copyright) in the data that is used to provide SUNA Products and/or Services.
3. Appropriate Use
SUNA Products and/or Services are intended as an aid to personal motoring and travel planning, and do not provide comprehensive or accurate information on all occasions. On occasions, you may experience additional delay as a result of using SUNA Products and/or Services. You acknowledge that it is not intended, or suitable, for use in applications where time of arrival or driving directions may impact the safety of the public or yourself.
4. Use of SUNA Products and Services while driving
You, and other authorised drivers of the vehicle in which SUNA Products and/or Services are available or installed and active, remain at all times responsible for observing all relevant laws and codes of safe driving. In particular, you agree to only actively operate SUNA Products and/or Services when the Vehicle is at a complete stop and it is safe to do so.
5. Service Continuity and Reception of the SUNA Traffic Channel
We will use reasonable endeavours to provide the SUNA Traffic Channel 24 hours a day, 365 days a year. The SUNA Traffic Channel may occasionally be unavailable for technical reasons or for planned maintenance. We will try to perform maintenance at times when congestion is light. We reserve the right to withdraw SUNA Products and/or Services at any time.
Also, we cannot assure the uninterrupted reception of the SUNA Traffic Channel RDS-TMC signal at any particular location.
6. Limitation of Liability
Neither Intelematics (nor its suppliers or the manufacturer of your device (the "Suppliers")) shall be liable to you or to any third party for any damages either direct, indirect, incidental, consequential or otherwise arising out of the use of or inability to use SUNA Products and/or Services even if Intelematics or a Supplier has been advised of the possibility of such damages. You also acknowledge that the neither Intelematics nor any Supplier guarantees nor make any warranties that relate to the availability, accuracy or completeness of SUNA Products and/or Services, and to the extent which it is lawful to do so, both Intelematics and each Supplier excludes any warranties which might otherwise be implied by any State or Federal legislation in relation to SUNA Products and/or Services.
7. Please Note
Great care has been taken in preparing this manual. Constant product development may mean that some information is not entirely up-to-date. The information in this document is subject to change without notice.
501
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Appendices
WARNING Driving while distracted can result in loss of vehicle control, crash and injury. We strongly recommend that you use extreme caution when using any device that may take your focus off the road. Your primary responsibility is the safe operation of your vehicle. We recommend against the use of any hand-held device while driving and encourage the use of voice-operated systems when possible. Make sure you are aware of all applicable local laws that may affect the use of electronic devices while driving.
502
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
4
4WD See: Four-Wheel Drive......................................154
A
A/C See: Climate Control.........................................107
About This Manual...........................................7 ABS
See: Brakes...........................................................159 ABS driving hints
See: Hints on Driving With Anti-Lock Brakes................................................................159
Accessories.....................................................451 Exterior Style........................................................451 Interior Style.........................................................451 Lifestyle..................................................................451 Peace of Mind......................................................451
Accessories See: Replacement Parts Recommendation............................................12
ACC See: Using Adaptive Cruise Control..............181
Active Park Assist...........................................171 Deactivating the Active Park Assist Feature...............................................................175 Parallel Parking, Perpendicular Parking, Parallel Park Out Assist................................171 Troubleshooting the System..........................176
Adjusting the Headlamps........................256 Horizontal Aim Adjustment...........................258 Vertical Aim Adjustment................................256
Adjusting the Steering Wheel....................70 Airbag Disposal..............................................46 Air Conditioning
See: Climate Control.........................................107 Air Filter
See: Changing the Engine Air Filter............264 Alarm
See: Anti-Theft Alarm........................................69 Ambient Lighting...........................................80 Anti-Theft Alarm............................................69
Arming the Alarm................................................69 Disarming the Alarm...........................................69 Appendices....................................................474
Apps.................................................................420 ..................................................................................420 SiriusXM Traffic and Travel Link...................422
At a Glance........................................................16 Audible Warnings and Indicators............90
Automatic Transmission Warning Chime..................................................................90
Engine On Warning Chime...............................90 Headlamps On Warning Chime.....................90 Key in Ignition Warning Chime........................90 Keyless Warning Alert .......................................90 Parking Brake On Warning Chime.................90 Audio Control...................................................70 Type One.................................................................70 Type Two...................................................................71 Audio System.................................................321 General Information...........................................321 Audio Unit - Vehicles With: AM/FM/CD/ SYNC/Touchscreen Display.................324 Audio Unit - Vehicles With: AM/FM/CD/ SYNC..............................................................322 Audio Unit - Vehicles With: AM/FM/ CD....................................................................327 Menu Structure...................................................329 Audio Unit - Vehicles With: Sony Audio System..........................................................326 Autolamps.........................................................77 Windshield Wiper Activated
Headlamps.........................................................77 Automatic Climate Control......................108
Dual Zone Temperature Control....................110 Single Zone Temperature Control.................110 Smart Zone............................................................110 Switching Back to Single Zone
Temperature Control.....................................110 Automatic High Beam Control..................78
Automatic High Beam Indicator.....................79 Switching the System On and Off.................79 Automatic Transmission...........................150 Brake-Shift Interlock Override.......................152 If Your Vehicle Gets Stuck In Mud or
Snow...................................................................153 SelectShift AutomaticTM
Transmission....................................................151 Understanding the Positions of Your
Automatic Transmission............................150 Automatic Transmission Fluid
Check.............................................................252
503
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Auto-Start-Stop...........................................136 Disabling Auto-Start-Stop..............................137 Enabling Auto-Start-Stop...............................136
Autowipers........................................................73 Autowipers Settings............................................74
Auxiliary Power Points.................................127 110 Volt AC Power Point....................................127 12 Volt DC Power Point......................................127 Locations................................................................127
B
Battery See: Changing the 12V Battery.....................253
Blind Spot Information System..............193 Switching the System Off and On...............194 System Errors.......................................................194 Using the Blind Spot Information System...............................................................193
BLIS See: Blind Spot Information System...........193
Bonnet Lock See: Opening and Closing the Hood...........241
Booster Seats..................................................25 Types of Booster Seats......................................26
Brake Fluid Check........................................252 Brakes...............................................................159
General Information..........................................159 Breaking-In......................................................213 Bulb Specification Chart...........................262
C
Cabin Air Filter.................................................113 California Proposition 65..............................11 Capacities and Specifications - 1.5L
EcoBoostTM.................................................307 Alternative Engine Oil for Extremely Cold
Climates.............................................................311 Specifications.....................................................308 Capacities and Specifications - 2.0L EcoBoostTM...................................................311 Alternative Engine Oil for Extremely Cold
Climates............................................................315 Specifications.......................................................312
Capacities and Specifications 2.5L.................................................................316 Alternative Engine Oil for Extremely Cold Climates............................................................319 Specifications.......................................................317
Capacities and Specifications...............300 Car Wash
See: Cleaning the Exterior..............................266 Catalytic Converter.......................................147
On-Board Diagnostics (OBD-II)...................148 Readiness for Inspection and Maintenance
(I/M) Testing...................................................148 Center Console..............................................129 Changing a Bulb...........................................258
Cornering Lamp (HID Headlamps) ...........260 Lamp Assembly Condensation....................258 Replacing Fog, Park and Turn Signal
Bulbs.................................................................260 Replacing Headlamp Bulbs...........................259 Replacing HID Headlamp Bulbs..................260 Replacing High-Mount Brake Lamp
Bulb....................................................................262 Replacing License Plate Lamp Bulb...........262 Replacing Reverse Lamp Assembly...........262 Replacing Side Marker Bulbs........................260 Replacing Turn Signal Bulbs..........................261 Changing a Fuse..........................................239 Fuses......................................................................239 Changing a Road Wheel...........................294 Dissimilar Spare Wheel and Tire Assembly
Information.....................................................294 Tire Change Procedure....................................295 Changing the 12V Battery.........................253 Battery Management System.......................255 Changing the Engine Air Filter................264 Duratec Engines.................................................265 EcoBoost Engines.............................................264 Changing the Wiper Blades.....................256 Front Wiper Blades...........................................256 Rear Window Wiper Blade.............................256 Checking MyKey System Status...............55 Checking the Wiper Blades......................255 Child Restraint and Seatbelt Maintenance.................................................36 Child Restraint Positioning..........................27 Child Safety.......................................................18 General Information.............................................18
504
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Child Safety Locks.........................................28 Left-Hand Side......................................................29 Right-Hand Side...................................................29
Cleaning Leather Seats.............................270 Cleaning Products.......................................266
Materials...............................................................266 Cleaning the Engine...................................268 Cleaning the Exterior..................................266
Cleaning the Headlamps................................267 Exterior Chrome Parts......................................267 Exterior Plastic Parts.........................................267 Stripes or Graphics............................................267 Underbody............................................................267 Under Hood..........................................................267 Cleaning the Instrument Panel and Instrument Cluster Lens........................269 Cleaning the Interior...................................269 Cleaning the Wheels....................................271 Cleaning the Windows and Wiper Blades...........................................................268 Clearing All MyKeys.......................................53 Climate Control.............................................107 Collision Warning System..........................197 PRINCIPLE OF OPERATION............................197 Coolant Check See: Engine Coolant Check...........................248 Crash Sensors and Airbag Indicator........45 Creating a MyKey............................................53 Programming/Changing Configurable
Settings...............................................................53 Cross Traffic Alert.........................................194
Blocked Sensors.................................................196 Switching the System Off and On...............196 System Errors.......................................................196 System Lights, Messages and Audible
Alerts..................................................................196 System Limitations............................................196 Using the Cross Traffic Alert System..........194 Cruise Control...................................................71 Principle of Operation......................................180 Type One...................................................................71 Type Two..................................................................72 Cruise control See: Using Cruise Control...............................180 Customer Assistance.................................222
D
Data Recording..................................................9 Event Data Recording..........................................10 Service Data Recording........................................9
Daytime Running Lamps.............................78 Type One - Conventional (Non-Configurable)........................................78 Type Two - Configurable...................................78
Digital Radio..................................................332 HD Radio Reception and Station Troubleshooting............................................333
Direction Indicators.......................................80 Doors and Locks.............................................58 Driver Alert.......................................................187
PRINCIPLE OF OPERATION............................187 USING DRIVER ALERT......................................187 Driver and Passenger Airbags...................39 Children and Airbags..........................................40 Proper Driver and Front Passenger Seating
Adjustment........................................................39 Driver Knee Airbag.........................................43 Driving Aids.....................................................187 Driving Hints....................................................213 Driving Through Water................................214 DRL
See: Daytime Running Lamps.........................78
E
Economical Driving......................................213 Electric Parking Brake.................................160
Applying the Electric Parking brake............160 Battery With No Charge...................................162 Releasing the Electric Parking Brake............161 Electromagnetic Compatibility...............474 Emission Law.................................................146 Noise Emissions Warranty, Prohibited
Tampering Acts and Maintenance..........147 Tampering With a Noise Control
System...............................................................146 End User License Agreement..................476
VEHICLE SOFTWARE END USER LICENSE AGREEMENT (EULA) .................................476
Engine Block Heater....................................134 Using the Engine Block Heater......................134
Engine Coolant Check...............................248 Adding Coolant..................................................248
505
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Coolant Change.................................................250 Engine Coolant Temperature
Management...................................................251 Fail-Safe Cooling...............................................250 Recycled Coolant..............................................250 Severe Climates.................................................250 Engine Emission Control...........................146 Engine Immobilizer See: Passive Anti-Theft System....................68 Engine Oil Check..........................................246 Adding Engine Oil..............................................246 Engine Oil Dipstick - 1.5L EcoBoostTM.................................................246 Engine Oil Dipstick - 2.0L EcoBoostTM/ 2.5L................................................................246 Engine Specifications - 1.5L EcoBoostTM................................................300 Drivebelt Routing..............................................300 Engine Specifications - 2.0L EcoBoostTM................................................300 Drivebelt Routing................................................301 Engine Specifications - 2.5L.....................301 Drivebelt Routing...............................................302 Entertainment..............................................396 AM/FM Radio......................................................398 Apps.......................................................................406 Bluetooth Stereo or USB................................405 CD...........................................................................404 HD RadioTM Information (If
Available).........................................................401 SiriusXM® Satellite Radio (If
Activated).......................................................398 Sources..................................................................397 Supported Media Players, Formats and
Metadata Information................................406 USB Ports............................................................406 Environment......................................................15 EPB See: Electric Parking Brake.............................160 Essential Towing Checks...........................210 Before Towing a Trailer......................................211 Hitches....................................................................210 Launching or Retrieving a Boat or Personal
Watercraft (PWC)..........................................211 Safety Chains.......................................................210 Trailer Brakes........................................................210 Trailer Lamps.......................................................210 When Towing a Trailer........................................211
Event Data Recording See: Data Recording..............................................9
Export Unique Options.................................14 Exterior Mirrors................................................82
Blind Spot Monitor..............................................83 Fold-Away Exterior Mirrors...............................82 Heated Exterior Mirrors......................................82 Integrated Blind Spot Mirrors..........................83 Memory Mirrors.....................................................82 Power Exterior Mirrors........................................82 Puddle Lamps ......................................................82 Signal Indicator Mirrors......................................82
F
Fastening the Seatbelts................................31 How to Extract Seatbelts in the Rear Outermost Positions......................................33 Seatbelt Locking Modes....................................32 Using Seatbelts During Pregnancy.................31
Flat Tire See: Changing a Road Wheel.......................294
Floor Mats........................................................214 Fog Lamps - Front
See: Front Fog Lamps.........................................79 Ford Credit.........................................................12
US Only......................................................................12 Ford Protect...................................................453
Ford Protect Extended Service Plan (CANADA ONLY)..........................................454
Ford Protect Extended Service Plans (U.S. Only)..................................................................453
Four-Wheel Drive.........................................154 Principle of Operation.......................................154
Front Fog Lamps............................................79 Front Parking Aid..........................................168
Obstacle Distance Indicator..........................169 Front Passenger Sensing System............40 Fuel and Refueling.......................................138 Fuel Consumption.......................................144
Advertised Capacity..........................................144 Calculating Fuel Economy..............................145 Filling the Fuel Tank...........................................145 Fuel Filler Funnel Location.......................140 Fuel Filter........................................................253 Fuel Quality....................................................138 Choosing the Right Fuel...................................138
506
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Choosing the Right Fuel - Flex Fuel Vehicles.............................................................139
Switching Between E85 and Gasoline............................................................140
Fuel Shutoff....................................................217 Fuses................................................................229 Fuse Specification Chart..........................229
Luggage Compartment Fuse Panel...........236 Passenger Compartment Fuse Panel........233 Power Distribution Box....................................229 Pre-Fuse Box.......................................................229
G
Garage Door Opener See: Universal Garage Door Opener............123
Gauges...............................................................86 Engine Coolant Temperature Gauge............87 Fuel Gauge..............................................................87 Information Display.............................................86
Gearbox See: Transmission..............................................150
General Information on Radio Frequencies...................................................47 Intelligent Access..................................................47
General Maintenance Information.......455 Multi-Point Inspection.....................................457 Owner Checks and Services.........................456 Protecting Your Investment...........................455 Why Maintain Your Vehicle?.........................455 Why Maintain Your Vehicle at Your Dealership?.....................................................455
Getting Assistance Outside the U.S. and Canada.........................................................225
Getting the Services You Need...............222 Away From Home..............................................222
H
Handbrake See: Parking Brake.............................................160
Hazard Flashers.............................................217 Headlamp Adjusting
See: Adjusting the Headlamps.....................256 Headlamp Exit Delay....................................78 Headrest
See: Head Restraints..........................................115
Head Restraints..............................................115 Adjusting the Head Restraint..........................116
Heated Seats..................................................122 Heated Steering Wheel................................72 Heated Windows and Mirrors...................113
Heated Exterior Mirrors......................................113 Heated Rear Window.........................................113 Windshield Wiper De-icer.................................113 Heating See: Climate Control.........................................107 Hill Start Assist..............................................162 Switching the System On and Off...............163 Using Hill Start Assist.......................................163 Hints on Controlling the Interior Climate...........................................................110 Defogging the Side Windows in Cold
Weather..............................................................113 General Hints........................................................110 Quickly Cooling the Interior..............................112 Quickly Heating the Interior..............................111 Recommended Settings for Cooling............112 Recommended Settings for Heating............112 Hints on Driving With Anti-Lock Brakes............................................................159 Home Screen................................................388 Hood Lock See: Opening and Closing the Hood...........241
I
Ignition Switch...............................................130 In California (U.S. Only).............................223 Information Display Control.......................72 Information Displays......................................91
General Information.............................................91 Information Messages.................................95
Airbag.......................................................................95 Alarm........................................................................96 Automatic Engine Shutdown..........................96 Auto Start-Stop....................................................97 Battery and Charging System..........................97 Blind Spot Information and Cross Traffic
Alert System.....................................................98 Collision Warning and Adaptive Cruise
Control (ACC)..................................................99 Doors........................................................................99 Engine.....................................................................100 Four-Wheel Drive...............................................100
507
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Hill Start Assist.....................................................101 Keyless Vehicle.....................................................101 Lighting...................................................................102 Maintenance........................................................102 Message Indicator................................................95 MyKey......................................................................102 Park Aid..................................................................103 Park Brake.............................................................103 Power Steering....................................................104 Remote Start.......................................................104 Starting System .................................................104 Tire Pressure Monitoring System.................105 Traction Control..................................................105 Trailer......................................................................105 Transmission........................................................106 Installing Child Restraints............................19 Child Restraints......................................................19 Using Lap and Shoulder Belts.........................20 Using Lower Anchors and Tethers for
CHildren (LATCH)............................................22 Using Tether Straps.............................................24 Instrument Cluster........................................86 Instrument Lighting Dimmer......................77 Instrument Panel Overview........................16 Instrument Panel Overview..............................16 Interior Lamps.................................................80 Front Interior Lamps...........................................80 Rear Interior Lamps............................................80 Interior Mirror...................................................84 Automatic Dimming Mirror...............................84 Manual Dimming Mirror.....................................84 Introduction.........................................................7
J
Jump Starting the Vehicle.........................218 To Connect the Booster Cables....................219 To Start the Engine............................................219
K
Keyless Entry.....................................................61 SECURICODETM KEYLESS ENTRY KEYPAD...............................................................61
Keyless Starting............................................130 Ignition Modes......................................................131
Keys and Remote Controls.........................47
L
Lane Keeping System.................................188 Switching the System On and Off...............189
Liftgate...............................................................64 Lighting Control..............................................76
Flashing the Headlamp High Beam...............77 Headlamp High Beam........................................76 Lighting...............................................................76 General Information............................................76 Load Carriers See: Roof Racks and Load Carriers.............201 Load Carrying...............................................200 Load Limit.......................................................202 Special Loading Instructions for Owners of
Pick-up Trucks and Utility-type Vehicles............................................................206 Vehicle Loading - with and without a Trailer.................................................................202 Locking and Unlocking.................................58 Activating Intelligent Access............................59 Autolock..................................................................60 Battery Saver..........................................................61 Illuminated Entry...................................................61 Illuminated Exit......................................................61 Locking and Unlocking the Doors with the Key Blade...........................................................58 Opening a Rear Door From the Inside..........59 Power Door Locks................................................58 Remote Control....................................................58 Smart Unlocks for Integrated Keyhead Transmitter........................................................60 Smart Unlocks for Intelligent Access Keys......................................................................60 Luggage Covers...........................................200 Lug Nuts See: Changing a Road Wheel.......................294
M
Maintenance...................................................241 General Information..........................................241
Manual Climate Control.............................107 Manual Liftgate..............................................64
Closing the Liftgate.............................................64 Opening the Liftgate...........................................64
508
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Manual Seats...................................................117 Adjusting the Height of the Driver Seat......................................................................118 Moving the Seat Backward and Forward...............................................................117 Recline Adjustment............................................118
Memory Function.........................................120 Saving a PreSet Position.................................120
Message Center See: Information Displays..................................91
Mirrors See: Heated Windows and Mirrors................113 See: Windows and Mirrors.................................81
Mobile Communications Equipment......14 Moonroof..........................................................84
Bounce-Back.........................................................85 Opening and Closing the Moonroof..............85 Opening and Closing the Sunscreen............85 Venting the Moonroof........................................85 Motorcraft Parts - 1.5L EcoBoostTM.................................................302 Motorcraft Parts - 2.0L EcoBoostTM.................................................303 Motorcraft Parts - 2.5L..............................304 MyKey Troubleshooting...............................56 MyKeyTM.............................................................52 Principle of Operation.........................................52
N
Navigation.......................................................412 cityseeker..............................................................419 Destination Mode...............................................414 Map Mode.............................................................413 Navigation Map Updates...............................420 Navigation Menu.................................................417 SiriusXM Traffic and Travel Link..................420 SYNC AppLink.....................................................419 Waypoints.............................................................418
Normal Scheduled Maintenance..........458 Intelligent Oil-Life MonitorTM........................458 Normal Maintenance Intervals....................459
O
Oil Change Indicator Reset.......................247 Oil Check
See: Engine Oil Check......................................246
Opening and Closing the Hood...............241 Closing the Hood...............................................242 Opening the Hood..............................................241
Ordering Additional Owner's Literature......................................................227 Obtaining a French Owner's Manual..........227
Overhead Console........................................129
P
Parking Aids....................................................167 Principle of Operation.......................................167
Parking Brake.................................................160 Passive Anti-Theft System........................68
SecuriLock®..........................................................68 PATS
See: Passive Anti-Theft System....................68 Perchlorate.........................................................11 Personal Safety SystemTM..........................37
How Does the Personal Safety System Work?...................................................................37
Phone...............................................................407 During a Phone Call...........................................410 Making Calls.......................................................409 Pairing Your Cell Phone for the First Time...................................................................407 Phone Menu........................................................408 Receiving Calls....................................................410 Smartphone Connectivity................................411 Text Messaging.....................................................411
Post-Crash Alert System..........................220 Power Door Locks
See: Locking and Unlocking.............................58 Power Liftgate.................................................65
Hands-Free Feature............................................67 Obstacle Detection..............................................67 Opening and Closing the Liftgate..................65 Setting the Liftgate Open Height..................66 Stopping the Liftgate Movement..................66 Power Seats....................................................118 Power Lumbar.....................................................120 Power Steering Fluid Check.....................253 Power Windows...............................................81 Accessory Delay....................................................82 Bounce-Back..........................................................81 One-Touch Close..................................................81 One-Touch Open..................................................81 Rear Window Lock................................................81
509
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Protecting the Environment........................15 Puncture
See: Changing a Road Wheel.......................294
R
Rear Parking Aid............................................167 Obstacle Distance Indicator..........................168
Rear Seat Armrest........................................129 Rear Seats........................................................121
Folding the Seatback.........................................121 Recline Adjustment.............................................121 Unfolding the Seatback.....................................121 Rear Under Floor Storage........................200 Adjustable Load Floor.....................................200 Cargo Management System.........................200 Rear View Camera........................................177 Using the Rear View Camera System..........177 Rear View Camera See: Rear View Camera.....................................177 Rear Window Wiper and Washers...........74 Rear Window Washer.........................................75 Recommended Towing Weights...........208 Refueling..........................................................142 Refueling System Overview............................142 Refueling System Warning.............................144 Refueling Your Vehicle......................................142 Remote Control...............................................47 Car Finder................................................................50 Integrated Keyhead Transmitter.....................47 Intelligent Access Key........................................48 Remote Start.........................................................50 Replacing the Battery.........................................48 Sounding a Panic Alarm....................................50 Remote Start...................................................114 Automatic Settings.............................................114 Previous Settings.................................................114 Repairing Minor Paint Damage................271 Replacement Parts Recommendation........................................12 Collision Repairs....................................................12 Scheduled Maintenance and Mechanical
Repairs..................................................................12 Warranty on Replacement Parts.....................12 Replacing a Lost Key or Remote Control..............................................................51 Reporting Safety Defects (Canada Only)...............................................................227
Reporting Safety Defects (U.S. Only)...............................................................227
Roadside Assistance...................................216 Vehicles Sold in Canada: Getting Roadside Assistance.........................................................217 Vehicles Sold in Canada: Roadside Assistance Program Coverage..................217 Vehicles Sold in Canada: Using Roadside Assistance.........................................................217 Vehicles Sold in the United States: Getting Roadside Assistance....................................216 Vehicles Sold in the United States: Using Roadside Assistance....................................216
Roadside Emergencies...............................216 Roof Racks and Load Carriers.................201
Adjusting the Crossbar.....................................201 Running-In
See: Breaking-In..................................................213 Running Out of Fuel....................................140
Adding Fuel From a Portable Fuel Container...........................................................141
Filling a Portable Fuel Container...................141
S
Safety CanopyTM............................................43 Safety Precautions......................................138 Satellite Radio..............................................334
Satellite Radio Electronic Serial Number (ESN).................................................................335
Satellite Radio Reception Factors...............335 SiriusXM Satellite Radio Service..................335 Troubleshooting.................................................336 Scheduled Maintenance Record...........463 Scheduled Maintenance...........................455 Seatbelt Extension........................................36 Seatbelt Height Adjustment......................33 Seatbelt Reminder........................................34 Belt-MinderTM........................................................34 Seatbelts...........................................................30 Principle of Operation........................................30 Seatbelt Warning Lamp and Indicator Chime...............................................................33 Conditions of operation.....................................34 Seats...................................................................115 Security..............................................................68 Settings...........................................................423 911 Assist...............................................................428
510
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Ambient Lighting...............................................435 Bluetooth..............................................................425 Clock.......................................................................425 Display...................................................................436 General..................................................................433 Media Player........................................................424 Mobile Apps..........................................................431 Navigation............................................................429 Phone.....................................................................425 Radio......................................................................428 Sound.....................................................................423 Valet Mode...........................................................437 Vehicle...................................................................435 Voice Control.......................................................436 Wi-Fi & Hotspot.................................................433 Side Airbags.....................................................42 Side Sensing System..................................169 Obstacle Distance Indicator...........................170 Sitting in the Correct Position...................115 Snow Chains See: Using Snow Chains.................................289 Spare Wheel See: Changing a Road Wheel.......................294 Special Notices................................................12 New Vehicle Limited Warranty.........................12 Notice to Owners of Pickup Trucks and
Utility Type Vehicles........................................13 On Board Diagnostics Data Link
Connector............................................................13 Special Instructions..............................................13 Using Your Vehicle as an Ambulance............13 Using Your Vehicle With a Snowplow............13 Special Operating Conditions Scheduled Maintenance...............................................461 Exceptions............................................................462 Speed Control See: Cruise Control............................................180 Stability Control............................................165 Principle of Operation.......................................165 Starter Switch See: Ignition Switch...........................................130 Starting a Gasoline Engine.........................131 Automatic Engine Shutdown.........................132 Failure to Start.....................................................132 Guarding Against Exhaust Fumes................133 Important Ventilating Information...............134 Stopping the Engine When Your Vehicle is
Moving................................................................133
Stopping the Engine When Your Vehicle is Stationary.........................................................133
Vehicles with an Ignition Key...........................131 Vehicles with Keyless Start..............................131 Starting and Stopping the Engine.........130 General Information..........................................130 Steering............................................................197 Electric Power Steering.....................................197 Steering Wheel................................................70 Storage Compartments.............................129 Sunroof See: Moonroof.......................................................84 Sun Visors.........................................................84 Illuminated Vanity Mirror...................................84 Supplementary Restraints System.........38 Principle of Operation........................................38 Symbols Glossary.............................................7 SYNCTM 3........................................................376 General Information..........................................376 SYNCTM 3 Troubleshooting......................437 SYNCTM Applications and Services........................................................354 911 Assist...............................................................354 SYNC Mobile Apps............................................356 SYNCTM...........................................................338 General Information.........................................338 SYNCTM Troubleshooting.........................368
T
Technical Specifications See: Capacities and Specifications...........300
The Better Business Bureau (BBB) Auto Line Program (U.S. Only).......................224
Tire Care..........................................................276 Glossary of Tire Terminology.........................278 Information About Uniform Tire Quality Grading..............................................................276 Information Contained on the Tire Sidewall............................................................279 Temperature A B C.............................................277 Traction AA A B C................................................277 Treadwear.............................................................277
Tire Pressure Monitoring System..........290 Changing Tires With a Tire Pressure Monitoring System........................................291 Understanding Your Tire Pressure Monitoring System ......................................292
511
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Tires See: Wheels and Tires......................................274
Towing a Trailer.............................................207 Load Placement.................................................207
Towing the Vehicle on Four Wheels...........................................................212 Emergency Towing.............................................212 Recreational Towing..........................................212
Towing..............................................................207 Traction Control............................................164
Principle of Operation.......................................164 Trailer Sway Control...................................208 Transmission Code Designation...........306 Transmission..................................................150 Transporting the Vehicle...........................220 Trip Computer.................................................94
All Value...................................................................95 Average Fuel..........................................................95 Digital Speedo.......................................................95 Distance to E..........................................................94 Instantaneous Fuel.............................................94 Resetting the Trip Computer...........................94 Trip Odometer.......................................................94 Trip Timer................................................................94
U
Under Hood Overview - 1.5L EcoBoostTM.................................................242
Under Hood Overview - 2.0L EcoBoostTM.................................................243
Under Hood Overview - 2.5L...................244 Unique Driving Characteristics................136 Universal Garage Door Opener................123
HomeLink Wireless Control System............123 USB Port..........................................................337 Using Adaptive Cruise Control.................181
Automatic Cancellation...................................184 Blocked Sensor...................................................185 Canceling the Set Speed.................................183 Changing the Set Speed..................................183 Detection Issues.................................................184 Following a Vehicle............................................182 Hilly Condition Usage.......................................184 Overriding the Set Speed................................183 Resuming the Set Speed.................................183 Setting the Adaptive Cruise Speed..............182 Setting the Gap Distance................................182
Switching Adaptive Cruise Control Off.......................................................................184
Switching Adaptive Cruise Control On........181 Switching to Normal Cruise Control...........186 System Not Available.......................................185 Using Cruise Control...................................180 Switching Cruise Control Off.........................180 Switching Cruise Control On..........................180 Using Four-Wheel Drive.............................154 Driving in Special Conditions With
Four-Wheel Drive..........................................154 Using MyKey With Remote Start
Systems..........................................................56 Using Snow Chains.....................................289 Using Stability Control...............................166 Using SYNCTM With Your Media
Player............................................................359 Accessing Your USB Song Library...............363 Bluetooth Devices and System
Settings............................................................365 Connecting Your Digital Media Player to the
USB Port..........................................................359 Media Menu Features......................................362 Media Voice Commands................................360 USB 2.....................................................................365 Voice Commands for Audio Sources.........366 Using SYNCTM With Your Phone............342 Accessing Features through the Phone
Menu..................................................................347 Accessing Your Phone Settings...................350 Bluetooth Devices..............................................351 Making Calls........................................................346 Pairing a Phone for the First Time...............343 Pairing Subsequent Phones..........................344 Phone Options during an Active Call.........346 Phone Voice Commands................................344 Receiving Calls...................................................346 System Settings.................................................352 Text Messaging..................................................348 Using Traction Control...............................164 Switching the System Off...............................164 System Indicator Lights and
Messages..........................................................164 Using a Switch.....................................................164 Using the Information Display
Controls.............................................................164 Using Voice Recognition...........................340
Audio Voice Commands.................................390
512
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
Index
Climate Voice Commands..............................391 Initiating a Voice Session...............................340 Mobile App Voice Commands......................394 Navigation Voice Commands.......................393 Phone Voice Commands................................392 SiriusXM Traffic and Travel Link Voice
Commands.....................................................395 System Interaction and Feedback...............341 Voice Settings Commands............................395 Utilizing the Mediation/Arbitration Program (Canada Only).........................225
V
Vehicle Care...................................................266 General Information.........................................266
Vehicle Certification Label......................306 Vehicle Identification Number...............305 Vehicle Storage..............................................271
Battery....................................................................272 Body.........................................................................271 Brakes.....................................................................272 Cooling system....................................................272 Engine.....................................................................272 Fuel system..........................................................272 General....................................................................271 Miscellaneous......................................................272 Removing Vehicle From Storage..................272 Tires.........................................................................272 Ventilation See: Climate Control.........................................107 VIN See: Vehicle Identification Number............305 Voice Control.....................................................71
W
Warning Lamps and Indicators.................87 Adaptive Cruise Control....................................88 Airbag - Front........................................................88 Anti-Lock Braking System................................88 Auto Start-Stop...................................................88 Battery.....................................................................88 Blind Spot Monitor..............................................88 Brake System........................................................88 Cruise Control.......................................................88 Direction Indicator...............................................88 Electric Park Brake..............................................89
Engine Oil................................................................89 Fasten Seatbelt....................................................89 Fog Lamps - Front...............................................89 High Beam..............................................................89 Information............................................................89 Low Fuel Level......................................................89 Low Tire Pressure Warning..............................89 Parking Lamps......................................................89 Service Engine Soon...........................................89 Traction and Stability Control.........................90 Traction and Stability Control Off.................90 Washer Fluid Check....................................253 Washers See: Cleaning the Exterior..............................266 Waxing.............................................................268 Wheel Nuts See: Changing a Road Wheel.......................294 Wheels and Tires..........................................274 General Information..........................................274 Technical Specifications.................................298 Windows and Mirrors.....................................81 Windshield Washers......................................74 Front Camera Washer.........................................74 Windshield Wipers.........................................73 Intermittent Wipe.................................................73 Speed Dependent Wipers.................................73 Wiper Blades See: Checking the Wiper Blades..................255 Wipers and Washers.....................................73
513
Escape (TM2) Canada/United States of America, JJ5J 19A321 AB enUSA, Edition date: 201706, Third Printing
XEP 4.16 build 20090723