VITTSJÖ

Safety Warnings

WARNING

Children have died from furniture tipover. To reduce the risk of furniture tipover:

• ALWAYS install anti-tip device provided. ⚠️
• NEVER put a TV on this product. ??
• NEVER allow children to stand, climb, or hang on any drawers, doors, or shelves. ??‍?‍?‍??
• NEVER open more than one drawer at a time. ??️
• Place heaviest items in the lowest drawers.

Read and follow each step of the instruction carefully.

Tools Required

The following tools may be needed for assembly:

• Phillips head screwdriver [cross symbol]
• Flat head screwdriver [line symbol]
• Screwdriver for screws with round heads [circle symbol]

General Assembly Notes

Assembly may require two people. [two figures] ?

Do not overtighten screws. [figure with crossed-out screw] ❌

If you encounter difficulties, refer to the IKEA instructions or contact IKEA. [figure with question mark and phone] ❓? IKEA

Parts List

Assembly Steps

Step 1

Assemble the base frame. Connect the long base rails to the shorter crossbars using screws (116654). Attach 6 adjustable feet (122158) to the bottom of the base frame.

Diagram shows two long base pieces being connected by shorter pieces, with adjustable feet being screwed into the bottom.

Step 2

Insert the first set of vertical support poles into the base frame. Ensure they are correctly oriented.

Diagram shows vertical poles being inserted into the corners of the base frame.

Step 3

Secure the vertical poles to the base frame using screws (116654). Insert screws from the outside into the connection points. A close-up shows the screw going into a bracket attached to the pole.

Diagram shows screws being inserted into the base frame to secure the vertical poles.

Step 4

Insert the next set of vertical support poles into the base frame.

Diagram shows more vertical poles being added to the frame.

Step 5

Secure these vertical poles using screws (116654). A hand symbol [?️] indicates pushing the pole into place before screwing.

Diagram shows screws being inserted to secure the poles. A hand symbol is shown.

Step 6

Insert and secure the remaining vertical support poles using screws (116654).

Diagram shows the final set of vertical poles being added and secured.

Step 7

Attach the top frame pieces. Connect the long top rails to the shorter crossbars using screws (122158) and brackets (150982/150984).

Diagram shows the top frame assembly, similar to the base but inverted, with screws and brackets.

Step 8

Connect the assembled top frame to the vertical support poles. An arrow [⬇️] indicates downward placement. Secure with screws.

Diagram shows the top frame being lowered onto the vertical poles. A close-up shows a screw being inserted to secure it.

Step 9

Add horizontal support bars to the structure. Insert them into the designated slots on the vertical poles. Secure with screws (116654).

Diagram shows horizontal bars being inserted and secured with screws. A close-up shows the screw mechanism.

Step 10

Attach additional top frame pieces. Secure with screws (122158) and brackets (150982/150984).

Diagram shows more top frame components being attached.

Step 11

Secure the horizontal supports to the frame using screws (116654). Arrows [➡️] indicate the direction of attachment.

Diagram shows screws being used to fix the horizontal bars in place. Close-ups show the screw and bracket connection.

Step 12

Attach side brackets (150982/150984) to the frame. Secure with screws (116654). A hand symbol [?️] indicates pushing the bracket into place.

Diagram shows side brackets being attached to the vertical poles. A close-up shows the screw and bracket. A hand symbol is shown.

Step 13

Attach more side brackets (150985/150987) to the frame. Secure with screws (116654). A hand symbol [?️] indicates pushing the bracket into place.

Diagram shows more side brackets being attached. A close-up shows the screw and bracket. A hand symbol is shown.

Step 14

Secure horizontal supports using screws (116654). Arrows [➡️] indicate insertion points.

Diagram shows screws securing horizontal supports. Close-ups show the screw and bracket.

Step 15

Attach side brackets (150982/150984) to the frame. Secure with screws (116654). A hand symbol [?️] indicates pushing the bracket into place.

Diagram shows side brackets being attached. A close-up shows the screw and bracket. A hand symbol is shown.

Step 16

Attach side brackets (150985/150987) to the frame. Secure with screws (116654).

Diagram shows more side brackets being attached. A close-up shows the screw and bracket.

Step 17

Secure the frame structure using screws (116654) and brackets. This step appears to reinforce the main frame.

Diagram shows screws and brackets being used to connect various parts of the main frame.

Step 18

Attach shelf supports (123723/124694) to the inner vertical poles using screws (6x).

Diagram shows small supports being screwed onto the inner vertical poles. A close-up shows the screw and support.

Step 19

Slide the side frame pieces into place. Secure with screws (116654).

Diagram shows the side vertical frame pieces being slid into position and then secured with screws.

Step 20

Secure the side frame pieces to the main structure using screws (123723/124694).

Diagram shows screws being used to attach the side vertical pieces to the horizontal elements.

Step 21

Final check of the assembled frame. Reiterate the anti-tip warning. Attach the anti-tip hardware to the top of the unit and the wall (not detailed in this step, but implied by the warning icons).

Diagram shows the completed frame. Icons indicate the anti-tip warning [⚠️] and a check for correct assembly [✔️].

Step 22

Place the shelves onto the shelf supports. Insert 18 shelf supports (123741) into the pre-drilled holes on the inner vertical poles, then place the shelves on top.

Diagram shows shelves being placed onto the supports. A close-up shows shelf supports being inserted into holes.