Akuvox SIP Video Door Intercom R20A On-Wall V5.0 - Silver | Zilver | R20A
INNOVATION SERVICE QUALITY Overview 1 Introduction 2 Hardware Part 3 Firmware Part 4 Wiring Specificities 1 Introduction Introduction Details n Slim n One Button n RFID13.56MHz & 125KHz n NFC n SIP n ONVIF n IP65 Original from Akuvox Website: https://www.akuvox.com/ProductsList.aspx?cid=3 Overview R20A Compact SIP Video Door Phone 2 Hardware Part Overview Back Front Original from Akuvox Knowledge Base: https://knowledge.akuvox.com/docs/installation-guide 3 Firmware Part Introduction Details n Status: Information. n Intercom: Settings, Call Log, etc. n Account: SIP account, etc. n Network: DHCP&Static IP Settings. n Phone: Displays, Voice settings. n Contacts: Group and contact. n Upgrade: Upgrade, device reset&reboot, Diagnosis. n Security: Password modification. Original from Akuvox Knowledge Base: https://knowledge.akuvox.com/docs/intercom-manual Overview Basic One: Network Details n Step One: Check the network status on the web interface in the Module of Status. n Step Two: Choose the DHCP or Static IP mode to sure the IP of the devices in the Module of Network > Basic. n Noted: DHCP is the default network connection mode, which automatically ask the network parameters from the network to the devices. Static IP Mode is which mode you could set the network parameters manually. Overview Basic Two: SIP Account Details n Step One: Check the SIP account information on the web interface in the Module of Account > Basic. n Step Two: Check the SIP account parameters. Overview Basic Three: Contact list Details n Step One: Check the Module of Intercom > Basic. n Step Two: Enter the IP / SIP number of the devices and end with different account, such as 123456/2, which means the SIP number of 123456 and calling out through SIP account 2. n Step Three: Choose whether hang up after open the door. Overview Basic Four: Access Control Details n Step One: Check the Module of Intercom > Users. n Step Two: Add Access Control information, such as User ID; RF Card; Pin code; Schedule etc.. n Noted: RF Card: place the card on the device card reader area and click obtain. Overview Basic Five: Relay Details n Step One: Check the Module of Intercom > Relay. n Step Two: Check the Relay parameters. n Noted: DTMF option is only for calling scenario. And the HTTP option is for calling and monitoring scenarios. Overview Basic Six: RTSP Details n Step One: Check the Module of Intercom > RTSP. n Step Two: Check the RTSP parameters. Overview 4 Wiring Specificities Overview Original from Akuvox Knowledge Base: https://knowledge.akuvox.com/docs/installation-guide l Need further support from Tech Team support@akuvox.com l Get a Quote from Sales Team sales@akuvox.com l Akuvox Training & Certification System http://learning.akuvox.com l Akuvox Community with Idea & Technology Sharing http://community.akuvox.com l Akuvox Knowledge Base with more guides and docs https://Knowledge.akuvox.com THANK YOU FOR WATCHING INNOVATION SERVICE QUALITYmacOS Version 12.6 (Build 21G115) Quartz PDFContext