Manuals+

HP Latex Printer Lubrication Felts Kit Replacement

Customer Self Repair Instructions

Applicable Printer Series

Procedure

Follow these steps to replace the lubrication felts kit in your HP Latex printer.

  1. Step 1: Initiate printer preparation. A hand is shown interacting with the printer's control panel screen.
  2. Step 2: Locate and move a blue lever or handle on the side of the printer.
  3. Step 3: Open an access panel on the front or side of the printer.
  4. Step 4: With gloves on, reach into the opened compartment. An orange arrow indicates the area of access.
  5. Step 5: Inside the printer, a blue component (lubrication felt assembly) is visible over a roller mechanism. An orange arrow points to this assembly.
  6. Step 6: A focused view of the blue lubrication felt assembly.
  7. Step 7: Close-up of the blue assembly. An orange arrow indicates the direction to release or slide the component.
  8. Step 8: A curved orange arrow shows the blue assembly being detached or rotated to release it.
  9. Step 9: Further illustration of the blue assembly being removed from its housing.
  10. Step 10: View of the printer's internal roller mechanism. An orange arrow highlights a point on the blue assembly that needs to be disengaged.
  11. Step 11: The blue assembly is shown being slid or released from its track.
  12. Step 12: The blue assembly is being pulled out of the printer. An orange arrow indicates the removal direction.
  13. Step 13: The new lubrication felt assembly is depicted being lifted out of its protective packaging box.
  14. Step 14: The new blue lubrication felt assembly is being aligned for installation into the printer's mechanism. An orange arrow shows the insertion path.
  15. Step 15: The new blue assembly is positioned correctly within the printer.
  16. Step 16: The new blue assembly is being slid into its final position. An orange arrow indicates the direction of movement.
  17. Step 17: Another view illustrating the insertion of the new blue assembly.
  18. Step 18: The new blue assembly is pushed into place. An orange arrow shows the securing action.
  19. Step 19: The blue assembly is shown being secured or locked into its operational position. An orange arrow indicates the final locking action.
  20. Step 20: A tool (e.g., screwdriver) is used to finalize the installation of the blue component. Orange arrows show the tool's application and the securing action.
  21. Step 21: A detailed close-up shows a hand manipulating the lubrication felt material itself, ensuring it is properly seated or prepared. An orange arrow indicates the direction of manipulation.
  22. Step 22: Another close-up shows a hand holding a tool, possibly for applying lubricant to the felt. Wavy lines suggest the application of a substance.
Models: 700, 800, R530, 730, 830, 700 Series Latex Printer, 700 Series, Latex Printer, Printer

PDF preview unavailable. Download the PDF instead.

pdf 12288267 en-US-1 Adobe InDesign 19.3 (Windows) Adobe PDF Library 17.0

Related Documents

PreviewHP Latex Printer Service Station Door Repair Instructions
Step-by-step customer self-repair instructions for replacing the service station door on HP Latex 630, 700, 730, 800, 830, and R530 printer series.
PreviewHP Latex Printer Wiper Roller Replacement Guide
Customer self-repair instructions for replacing the wiper roller on HP Latex 500, 700, 730, 800, and 830 printer series. Includes step-by-step guidance.
PreviewHP Latex Printer Edge Holder Installation Guide | Customer Self Repair
Detailed instructions for installing Edge Holders on HP Latex 630, 700, 800, 730, and 830 printer series. Includes physical and software steps, and media compatibility checks via PrintOS Media Locator.
PreviewHP Latex Printer Ink Mix Container Replacement Guide
Step-by-step instructions for replacing ink cartridges within the Ink Mix Container for HP Latex 630, HP Latex 700, and HP Latex 730 printer series. Includes detailed visual descriptions for customer self-repair.
PreviewManuel de l'utilisateur des imprimantes HP Latex 700, 730 et 800/830
Ce manuel de l'utilisateur fournit des informations complètes sur l'utilisation, la maintenance et le dépannage des imprimantes HP Latex 700, 730, 800 et 830. Il couvre les caractéristiques du produit, les accessoires, la documentation, les mesures de sécurité, la gestion des substrats, les paramètres, la résolution des problèmes et les spécifications.
PreviewHP Latex 730 Printer: Maximize Productivity and Deliver High-Value Jobs
Discover the HP Latex 730 Printer, designed for consistent quality, simplified production, and sustainable solutions. Learn about its technical specifications, applications, and ordering information.
PreviewGuía del usuario de las impresoras HP Latex serie 700/730 y 800/830
Esta guía proporciona información detallada sobre el uso, mantenimiento y solución de problemas de las impresoras HP Latex serie 700/730 y 800/830. Incluye instrucciones sobre instalación, configuración, operación, consumibles y especificaciones técnicas.
PreviewHP Latex 126-in Roll-to-Freefall Kit User Guide
User guide for the HP Latex 126-in Roll-to-Freefall Kit, detailing installation, substrate loading configurations (roll-to-freefall and roll-to-collector), hardware maintenance, diagnostics, and error troubleshooting for HP Latex 1500 and HP Latex 2700/FS50/FS60 printer series.