Buy musical instruments online from the market leader – United States
User Manual for SIRUS models including: Z-Amp 4.250T Mixer Amplifier, Z-Amp, 4.250T Mixer Amplifier, Mixer Amplifier, Amplifier
Sirus Z-Amp 4.250T – Thomann United Kingdom
File Info : application/pdf, 20 Pages, 1.28MB
DocumentDocumentZ-Amp 4.250T Mixer Amplifier User Manual Thomann GmbH Hans-Thomann-Straße 1 96138 Burgebrach Germany Telephone: +49 (0) 9546 9223-0 Internet: www.thomann.de 31.10.2024, ID: 575416 (V2) Table of contents Table of contents 1 General information.............................................................................................................. 5 1.1 Symbols and signal words........................................................................................... 5 2 Safety instructions................................................................................................................. 6 3 Features....................................................................................................................................... 8 4 Installation and starting up............................................................................................... 9 4.1 Pin assignment................................................................................................................. 9 4.2 Screw terminal strips................................................................................................... 10 5 Connections and controls................................................................................................ 11 6 Technical specifications.................................................................................................... 14 7 Cleaning.................................................................................................................................... 16 8 Protecting the environment........................................................................................... 17 3 Z-Amp 4.250T Mixer Amplifier 4 Z-Amp 4.250T Mixer Amplifier General information 1 General information This document contains important instructions for the safe operation of the product. Read and follow the safety instructions and all other instructions. Keep the document for future reference. Make sure that it is available to all those using the product. If you sell the product to another user, be sure that they also receive this document. Our products and documentation are subject to a process of continuous develop- ment. They are therefore subject to change. Please refer to the latest version of the documentation, which is ready for download under www.thomann.de. 1.1 Symbols and signal words In this section you will find an overview of the meaning of symbols and signal words that are used in this document. Signal word DANGER! WARNING! NOTICE! Meaning This combination of symbol and signal word indicates an immediate dangerous situation that will result in death or serious injury if it is not avoided. This combination of symbol and signal word indicates a possible dangerous situation that can result in death or serious injury if it is not avoided. This combination of symbol and signal word indicates a possible dangerous situation that can result in mate- rial and environmental damage if it is not avoided. Warning signs Type of danger Warning high-voltage. Warning danger zone. 5 Z-Amp 4.250T Mixer Amplifier Safety instructions 2 Safety instructions Intended use This device is intended to be used for amplification, mixing and playback of signals from musical instruments and microphones. Use the device only as described in this user manual. Any other use or use under other operating conditions is considered to be improper and may result in personal injury or property damage. No liability will be assumed for damages resulting from improper use. This device may be used only by persons with sufficient physical, sensorial, and intel- lectual abilities and having corresponding knowledge and experience. Other persons may use this device only if they are supervised or instructed by a person who is responsible for their safety. Safety DANGER! Risk of injury and choking hazard for children! Children can suffocate on packaging material and small parts. Children can injure themselves when handling the device. Never allow children to play with the packaging material and the device. Always store packaging material out of the reach of babies and small children. Always dispose of packaging material properly when it is not in use. Never allow children to use the device without supervision. Keep small parts away from children and make sure that the device does not shed any small parts (such knobs) that children could play with. DANGER! Danger to life due to electric current! Within the device there are areas where high voltages may be present. Never remove any covers. There are no user-serviceable parts inside. Do not use the device when covers, safety equipment or optical components are missing or damaged. DANGER! Risk of death from electrical current! The output voltages of modern high-performance amplifiers may result in death or serious injury. Never touch the bare ends of loudspeaker cables when the amplifier is on. DANGER! Risk of death from electrical current! Hazardous voltage may be present at cable ends and screw terminals. The connection of screw terminals and all maintenance and repair work on the electrical installation of the device may only be performed by a qualified electrician. Always perform main- tenance and repair work when the device is free from voltage. Failure to comply may result in electric shock and risk of fire and loss of life. Always observe all electrical safety instructions applicable in the country of operation. DANGER! Danger to life due to electric current! A short circuit could lead to a fire hazard and risk of death. Always use proper ready-made insulated triple-core mains cable with a safety plug. Do not modify the mains cable or the plug. In case of isolation damage, disconnect immediately the power supply and arrange repair. If in doubt, seek advice from a qualified electrician. WARNING! Possible hearing damage due to high volumes on speakers! With loudspeakers connected, the device can produce volume levels that may cause temporary or permanent hearing impair- ment. Over an extended period of time, even levels that seem to be uncritical can cause hearing damage. Do not operate the device permanently at a high volume level. Decrease the volume level immediately if you experience ringing in your ears or hearing impairment. If this is not possible, keep a greater distance to the speaker or use adequate ear-muffs. NOTICE! Risk of fire due to covered vents and neighbouring heat sources! If the vents of the device are covered or the device is operated in the immediate vicinity of other heat sources, the device can overheat and burst into flames. Never cover the device or the vents. Do not install the device in the immediate vicinity of other heat sources. Never operate the device in the immediate vicinity of naked flames. 6 Z-Amp 4.250T Mixer Amplifier Safety instructions NOTICE! Damage to the device if operated in unsuitable ambient conditions! The device can be damaged if it is operated in unsuitable ambient conditions. Only operate the device indoors within the ambient conditions specified in the "Technical specifications" chapter of this user manual. Avoid operating it in environments with direct sunlight, heavy dirt and strong vibrations. Avoid operating it in environments with strong temperature fluctuations. If temperature fluctuations cannot be avoided (for example after transport in low outside temperatures), do not switch on the device immediately. Never subject the device to liquids or moisture. Never move the device to another location while it is in oper- ation. In environments with increased dirt levels (for example due to dust, smoke, nicotine or mist): Have the device cleaned by qualified specialists at regular intervals to prevent damage due to overheating and other malfunctions. NOTICE! Damage to the device due to high voltages! The device can be damaged if it is operated with the incorrect voltage or if high voltage peaks occur. In the worst case, excess voltages can also cause a risk of injury and fires. Make sure that the voltage specification on the device matches the local power grid before plugging in the device. Only operate the device from professionally installed mains sockets that are protected by a residual current circuit breaker (FI). Ensure that the power cord plug is easily accessible at all times if it is the only device to safely disconnect the device from the mains supply. As a precaution, disconnect the device from the power grid when storms are approaching or it the device will not be used for a longer period. NOTICE! Risk of fire due to installation of a wrong fuse! Using fuses of a different type than compatible with the device may cause a fire and seriously damage the device. Only use fuses of the same type. Observe the labelling on the device casing and the information in the "Technical data" chapter. 7 Z-Amp 4.250T Mixer Amplifier Features 3 Features n 4-zone amplifier n Class D amplifier n Volume control on the front n Zone selection n 4 microphone/line inputs n Media player for playing back audio files via USB or Bluetooth n 18 V phantom voltage input n Priority control n Input for connecting an external audio device n Screw terminals for connecting speakers, phone systems or amplifiers n Includes 19-inch kit for rack mounting 8 Z-Amp 4.250T Mixer Amplifier Installation and starting up 4 Installation and starting up Unpack and check carefully there is no transportation damage before using the unit. Keep the equipment packaging. To fully protect the product against vibration, dust and moisture during transportation or storage use the original packaging or your own packaging material suitable for transport or storage, respectively. 4.1 Pin assignment XLR connections for signal inputs Create all connections while the device is off. Use the shortest possible high-quality cables for all connections. Take care when running the cables to prevent tripping hazards. Balanced XLR panel sockets serve as signal inputs. The drawings and tables show the XLR pin assignment. Balanced wiring: 1 Ground, shielding 2 Positive signal (+) 3 Negative signal () Jack plugs for signal inputs The figures and tables show the pin assignments of 6.35-mm jack plugs. Balanced stereo jack wiring: 1 Positive signal (+) 2 Negative signal () 3 Ground, shielding Cinch plugs for signal inputs Drawing and table indicate the pin assignment of a cinch plug. Unbalanced wiring: 1 Signal 2 Ground 9 Z-Amp 4.250T Mixer Amplifier Installation and starting up 4.2 Screw terminal strips All speaker units and a phone system are connected via a screw terminal strip on the back of the device. First detach the covers of the screw terminal strips using a suitable screwdriver. Loosen the required screw terminals (see connection diagram) and attach the neces- sary cables using a suitable screwdriver. Rack mounting Finally check all cable connections for tightness and reattach the terminal screw strip covers to the device. The device has been designed for rack mounting in a standard 19-inch rack; it occu- pies two rack units. 10 Z-Amp 4.250T Mixer Amplifier Connections and controls 5 Connections and controls Front ö # & '( ) * +, Z-Amp 4.250T INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 TREBLE TREBLE TREBLE TREBLE TREBLE TEL ZONE 1 OUTDOOR INDOOR VOLUME ZONE 2 OUTDOOR INDOOR VOLUME NOR MP3-BT MENU ZONE1 ZONE2 ZONE3 ZONE4 0 10 0 10 0 10 0 10 BASS BASS BASS BASS BASS VOL Z1 Z2 VOL Z1 Z2 VOL Z1 Z2 VOL Z1 Z2 VOL Z1 Z2 VOL ZONE 3 OUTDOOR INDOOR Z1 Z2 VOLUME Z3 Z4 Z3 Z4 Z3 Z4 Z3 Z4 Z3 Z4 Z3 Z4 Zone Selector Zone Selector Zone Selector Zone Selector Zone Selector Zone Selector ZONE 4 OUTDOOR INDOOR VOLUME POWER ON OFF $ % + * 1 Display and operating buttons for the media player 2 | USB-A input for connecting external audio devices, e.g. an MP3 player 3 [ZONE 1]...[ZONE 4] | Rotary control for adjusting the volume of zones 1 to 4 of the media player. 4 [Zone Selector Z1]...[Zone Selector Z4] | Buttons for selecting zones 1 to 4 The signals from the [INPUT 1]...[INPUT 5] and [Tel. Paging] inputs are assigned to the selected zones. 5 [TREBLE] | Rotary control for adjusting the high frequencies of inputs [INPUT 1]...[INPUT 5]. Starting from the neutral position, turn the control knob in clockwise or anti-clockwise direction to boost or cut the treble frequencies by up to ± 10 dB. 6 [BASS] | Rotary control for adjusting the low frequencies of inputs [INPUT 1]...[INPUT 5]. Starting from the neutral position, turn the control knob in clockwise or anti-clockwise direction to boost or cut the bass frequencies by up to ± 10 dB. 7 [VOL] | Rotary control for adjusting the volume of inputs [INPUT 1]...[INPUT 5]. Starting from the neutral position, turn the control knob clockwise or anti-clockwise to increase or reduce the volume. 8 [VOL] | Rotary control for adjusting the volume of the input signal on the [Tel. Paging] input. Starting from the neutral position, turn the control knob clockwise or anti-clockwise to increase or reduce the volume. When the [Tel. Paging] input is not in use, turn the volume to the zero position. 9 [OUTDOOR/INDOOR] | Button for selecting the bandwidth of outputs [ZONE 1]...[ZONE 4] 10 [VOLUME] | Rotary control for adjusting the volume of outputs [ZONE 1]...[ZONE 4]. Starting from the neutral position, turn the control knob clockwise or anti-clockwise to increase or reduce the volume. 11 | Main switch. Turns the device on and off. 11 Z-Amp 4.250T Mixer Amplifier Connections and controls Back - . 0 1 2 3 / 456 7 12 Fan 13 [GND] | Connection screw for the ground cable 14 Rubber panel plug with fuse holder for the power supply 15 [ZONE 1]...[ZONE 4] | Screw terminal strips for connecting the speaker system(s) 16 [INPUT 5] | Cinch input sockets for connecting an external audio device 17 [LINE/MIC/PHANTOM] | Signal level switch for inputs [INPUT 1]...[INPUT 4] 18 [INPUT 1]...[INPUT 4] | Inputs 1 to 4, designed as XLR/jack combination sockets 19 [Monitor Line Out] | Screw terminals for connecting an amplifier, recorder etc. 20 [Monitor 1 W 8] | Screw terminals for connecting a speaker that is supplied with a rated power of 1 W by an additional power amplifier. 21 [Priority] | If these screw terminals are short-circuited (e.g. with an electric switch), the input signal of inputs [INPUT 2]... [INPUT 5] is attenuated. 22 [Tel. Paging] | Screw terminals for connecting an AUX signal (e.g. phone system). The input is equipped with voice prioriti- sation that overrides all other input signals as soon as an AUX signal is transmitted. 12 Z-Amp 4.250T Mixer Amplifier Media player NOR MP3-BT MENU 89:;<= Connections and controls Button Action 23 /[MENU] Press briefly Press and hold 24 Press briefly 25 Press briefly 26 Press briefly 27 Press briefly Press and hold 28 Press briefly Press and hold USB USB on USB off Play/pause Search for file Repeat file (4 modes) Previous file Increase volume Next file Reduce volume Bluetooth Bluetooth on Bluetooth off Play/pause No function No function No function No function No function No function 13 Z-Amp 4.250T Mixer Amplifier Technical specifications 6 Technical specifications 134 mm 449 mm Z-Amp 4.250T INPUT 1 INPUT 2 INPUT 3 INPUT 4 INPUT 5 TREBLE TREBLE TREBLE TREBLE TREBLE TEL ZONE 1 OUTDOOR INDOOR VOLUME ZONE 2 OUTDOOR INDOOR VOLUME NOR MP3-BT MENU ZONE1 ZONE2 ZONE3 ZONE4 0 10 0 10 0 10 0 10 BASS BASS BASS BASS BASS VOL Z1 Z2 VOL Z1 Z2 VOL Z1 Z2 VOL Z1 Z2 VOL Z1 Z2 VOL ZONE 3 OUTDOOR INDOOR Z1 Z2 VOLUME Z3 Z4 Z3 Z4 Z3 Z4 Z3 Z4 Z3 Z4 Z3 Z4 Zone Selector Zone Selector Zone Selector Zone Selector Zone Selector Zone Selector ZONE 4 OUTDOOR INDOOR VOLUME POWER ON OFF Amplifier class Output power Frequency range Bandwidth Input sensitivity Sound control Total harmonic distortion (THD) Signal-to-noise ratio Phantom power Output impedance LINE output voltage Priority control Priority sensitivity Bluetooth Supply voltage Class D 4 80 Hz ... 18 kHz (3 dB) MIC (outdoor) MIC (indoor) LINE (outdoor) LINE (indoor) AUX (outdoor) AUX (indoor) MIC: 40 dBV, ± 2 dB (balanced) LINE: 5 dBV, ± 2 dB (balanced) AUX: 5 dBV, ± 2 dB (unbalanced) TEL: 15 dBV, ± 2 dB Treble: ± 10 dB, 10 kHz Bass: ± 10 dB, 100 Hz £ 1 % MIC: > 65 dB LINE: > 75 dB AUX: > 75 dB 18 V COM, 4 COM, 70 V, 100 V INPUT 1 MIC + TEL, 60 dBV/3S Frequency range Max. transmission power Standard Name 220 - 240 V 50/60 Hz 14 Z-Amp 4.250T Mixer Amplifier 370 mm 4 × 250 W (RMS) @ 70 V/100 V 178 Hz...7.96 kHz 132 Hz...7.96 kHz 138 Hz...12.6 kHz 70 Hz...12.6 kHz 144 Hz...17 kHz 76 Hz...17 kHz 2402 MHz...2480 MHz 4.07 dBm Version 5.0 Z-Amp 4.250T Technical specifications Power consumption, max. Rated power Fuse Dimensions (W × H × D) Weight Ambient conditions 1,500 W 1,100 W 220 - 240 V: 5 mm x 20 mm, 6.3 A, 250 V, slow blow 449 mm × 134 mm × 370 mm (without rack angle) 484 mm × 134 mm × 370 mm (with rack angle) 17.6 kg Temperature range 0 °C...40 °C Relative humidity 20%...80% (non-condensing) Block diagram 15 Z-Amp 4.250T Mixer Amplifier Cleaning 7 Cleaning Components Fan grids Clean the externally accessible parts of the device regularly. The frequency of cleaning depends on the operating environment: wet, smoky or particularly dirty sur- roundings can cause more dirt to accumulate on the device parts. n Clean with a soft dry cloth. n Stubborn stains may be removed with a slightly damp cloth. n Never use cleaners containing alcohol or thinner. The fan grids of the device must be cleaned of any contamination, such as dust, etc. on a regular basis. Before cleaning, switch off the device and disconnect mains-oper- ated devices from the mains. Only use pH-neutral, solvent-free and non-abrasive cleaning agents. Clean the unit with a slightly damp lint-free cloth. 16 Z-Amp 4.250T Mixer Amplifier Protecting the environment 8 Protecting the environment Disposal of the packing material Environmentally friendly materials have been chosen for the packaging. These mate- rials can be sent for normal recycling. Ensure that plastic bags, packaging, etc. are dis- posed of in the proper manner. Do not dispose of these materials with your normal household waste, but make sure that they are collected for recycling. Please follow the instructions and markings on the packaging. Observe the disposal note regarding documentation in France. Disposal of your old device This product is subject to the European Waste Electrical and Electronic Equipment Directive (WEEE) as amended. Do not dispose of your old device with your normal household waste; instead, deliver it for controlled disposal by an approved waste disposal firm or through your local waste facility. If in doubt, consult your local waste management facility. You can also return the device to a retailer if they offer to take the device back for free or if they are legally obliged to do so. When disposing of the device, comply with the rules and regulations that apply in your country. You can also return your old device to Tho- mann GmbH at no charge. Check the current conditions on www.thomann.de. Proper disposal protects the environment as well as the health of your fellow human beings. This is because the proper handling of old devices negates the potential neg- ative effects of hazardous substances, and because it conserves resources by recy- cling them. Also note that waste avoidance is a valuable contribution to environmental protec- tion. Repairing a device or passing it on to another user is an ecologically valuable alternative to disposal. If your old device contains personal data, delete those data before disposing of it. 17 Z-Amp 4.250T Mixer Amplifier Notes 18 Z-Amp 4.250T Mixer Amplifier Musikhaus Thomann · Hans-Thomann-Straße 1 · 96138 Burgebrach · Germany · www.thomann.de