SDS100200 RemoteCommand Specification V1 02
Mitsuru Kubo
SDS100 RemoteCommand Specification V1 02 SDS100 SDS200 Remote Command Specification
Version 1.02 2023/12/22
Date
2018/04/13 2023/12/11 2023/12/22
Version
0.01 1.01 1.02
Contents
Created new basd BCD536HP/BCD436HP Remote Command Specification Version 1.05. Append Waterfall Append GST command
History
For Internal Use Only
2/38
No. Command Function
1 MDL 2 VER 3 KEY 4 QSH 5 STS 6 JNT 7 NXT 8 PRV 9 FQK 10 SQK 11 DQK 12 PSI 13 GSI 14 GLT 15 HLD 16 AVD 17 SVC 18 JPM 19 DTM 20 LCR 21 AST 22 APR 23 URC 24 MNU 25 MSI 26 MSV 27 MSB 28 GST 29 PWF 30 GWF
Get Model Info Get Firmware Version Push KEY Go to quick search hold mode Get Current Status Jump Number tag Next Previous Get/Set Favorites List Quick Keys Status Get/Set System Quick Keys Status Get/Set Department Quick Keys Status Push Scanner Information Get Scanner Information Get xxx list Hold Set Avoid Option Get/Set Service Type Settings Jump Mode Get/Set Date and Time. Get/Set Location and range. Analize Start Analize Pauze/Resume User Record Control Menu Mode command Menu Status Info Menu Set Value Menu Structure Back Get scanner status (for WF) Push Waterfall FFT Information GetWaterfall FFT Information
Program Mode Only
Command List
3/38
--------------------------------------------------------------------------------------------------------------------------------------MDL Get Model Info ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
MDL[\r]
Radio Controller
(1)
MDL,[MODEL_NAME][\r]
[MODEL_NAME] SDS100
SDS200
--------------------------------------------------------------------------------------------------------------------------------------VER Get Firmware Version ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
VER[\r]
Radio Controller
(1)
VER,[VERSION][\r]
[VERSION]
Version x.xx.xx
--------------------------------------------------------------------------------------------------------------------------------------KEY Push KEY ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
KEY,[KEY_CODE],[KEY_MODE][\r]
Radio Controller
(1)
KEY,OK[\r]
See "key code for KEY Command" sheet for KEY_CODE.
--------------------------------------------------------------------------------------------------------------------------------------QSH Go to quick search hold mode ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
QSH,[FRQ][\r]
Radio Controller
(1)
QSH,OK[\r]
This command is invalid when the scanner is in Menu Mode, during Direct Entry operation, during Quick Save operation.
--------------------------------------------------------------------------------------------------------------------------------------STS Get Current Status ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
STS[\r]
Radio Controller
Remote Command
4/38
Note:
(1)
STS,[DSP_FORM],[L1_CHAR],[L1_MODE],[L2_CHAR],[L2_MODE],
[L3_CHAR],[L3_MODE],,[L20_CHAR],[L20_MODE],
[RSV],[RSV],[RSV],[RSV],[RSV],
[RSV],[RSV],[RSV],[RSV][\r]
STS Command is compatible with old scanner. PSI is better than STS. See "Font Data Specification" for not ascii character code.
--------------------------------------------------------------------------------------------------------------------------------------JNT Jump Number tag ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
JNT,[FL_TAG],[SYS_TAG],[CHAN_TAG][\r]
[FL_TAG] [SYS_TAG] [CHAN_TAG]
Favorites List Number Tag (0-99)
System Number Tag
(0-99)
Channel Number Tag
(0-999)
Radio Controller
(1)
JNT,OK[\r]
--------------------------------------------------------------------------------------------------------------------------------------NXT Next ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
NXT,[tkw],[xxx1],[xxx2],[COUNT][\r]
Radio Controller
(2)
NXT,OK\r
[tkw] [xxx1] [xxx2] [COUNT]
see sheet "tkd and 1st,2nd opt"
see sheet "tkd and 1st,2nd opt"
see sheet "tkd and 1st,2nd opt"
slide counts
(1-8)
--------------------------------------------------------------------------------------------------------------------------------------PRV Previous ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
PRV,[tkw],[xxx1],[xxx2],[COUNT][\r]
Radio Controller
(2)
PRV,OK\r
[tkw] [xxx1] [xxx2] [COUNT]
see sheet "tkd and 1st,2nd opt"
see sheet "tkd and 1st,2nd opt"
see sheet "tkd and 1st,2nd opt"
slide counts
(1-8)
---------------------------------------------------------------------------------------------------------------------------------------
Remote Command
5/38
FQK Get/Set Favorites List Quick Keys Status ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
FQK[\r]
(2)
FQK,[S0],[S1],......[S99][\r]
Radio Controller
(1)
FQK,[S0],[S1],......[S99][\r]
(2)
FQK,OK\r
[Quick Key Status (S0-S99)] 0 : FLQK does not exist 1 : FLQK exists and is disabled 2 : FLQK exists and is enabled
If controller sends 0 (QK does not exist), radiowill ignore 0.
--------------------------------------------------------------------------------------------------------------------------------------SQK Get/Set System Quick Keys Status ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
SQK,[FAV_QK][\r]
(2)
SQK,[FAV_QK],[S0],[S1],......[S99][\r]
Radio Controller
(1)
SQK,[FAV_QK],[SYS_QK],[S0],[S1],......[S99][\r]
(2)
SQK,OK[\r]
[Quick Key Status (S0-S99)] 0 : SQK does not exist 1 : SQK exists and is disabled 2 : SQK exists and is enabled
If controller sends 0 (QK does not exist), radiowill ignore 0.
--------------------------------------------------------------------------------------------------------------------------------------DQK Get/Set Department Quick Keys Status ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
DQK,[FAV_QK],[SYS_QK][\r]
(2)
DQK,[FAV_QK],[SYS_QK],[S0],[S1],......[S99][\r]
Radio Controller
(1)
DQK,[FAV_QK],[SYS_QK],[S0],[S1],......[S99][\r]
(2)
DQK,OK[\r]
[Quick Key Status (S0-S99)] 0 : DQK does not exist 1 : DQK exists and is disabled 2 : DQK exists and is enabled
If controller sends 0 (QK does not exist), radiowill ignore 0.
---------------------------------------------------------------------------------------------------------------------------------------
Remote Command
6/38
PSI
Push Scanner Information
---------------------------------------------------------------------------------------------------------------------------------------
format will be XML. See PSI,GSI tab
---------------------------------------------------------------------------------------------------------------------------------------
GSI
Get Scanner Information
---------------------------------------------------------------------------------------------------------------------------------------
format will be XML. See PSI,GSI tab
--------------------------------------------------------------------------------------------------------------------------------------GLT Get xxx list --------------------------------------------------------------------------------------------------------------------------------------GLT is command which PC get xx list form scanner.
See "GLT command" sheet to detail.
--------------------------------------------------------------------------------------------------------------------------------------HLD Hold --------------------------------------------------------------------------------------------------------------------------------------HLD is command to hold system, department, channel. It can't hold favorites list and site frequency.
Controller Radio HLD,[tkw],[xxx1],[xxx2][\r]
tkw: xxx1 xxx2
see sheet "tkd and 1st,2nd opt" see sheet "tkd and 1st,2nd opt" see sheet "tkd and 1st,2nd opt"
Radio Controller HLD,OK[\r]
--------------------------------------------------------------------------------------------------------------------------------------AVD Set Avoid Option --------------------------------------------------------------------------------------------------------------------------------------AVD is command to avoid or unavoid. It can't avoid favorites list and site frequency.
Controller Radio AVD,[tkw],[xxx1],[xxx2][STATUS][\r]
tkw: xxx1 xxx2
see sheet "tkd and 1st,2nd opt" see sheet "tkd and 1st,2nd opt" see sheet "tkd and 1st,2nd opt"
[STATUS]1:Permanent Avoid 2:Temporary Avoid 3:Stop Avoiding
Radio Controller AVD,OK[\r]
Remote Command
7/38
Note:Please use the GSI or GLT command if you need to get avoid status
--------------------------------------------------------------------------------------------------------------------------------------SVC Get/Set Service Type Settings ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
SVC[\r]
(2)
SVC,[PST1],[PST2],...,[PST37],[CST1],...,[CST10][\r]
Radio Controller
(1)
SVC,[PST1],[PST2],...,[PST37],[CST1],...,[CST10][\r]
(2)
SVC,OK[\r]
[PSTx] 0: Off (Not Scan) 1: On (Scan)
--------------------------------------------------------------------------------------------------------------------------------------JPM Jump Mode ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
JPM,[JUMP_MODE],[INDEX][\r]
[JUMP_MODE]
SCN_MODE CTM_MODE QSH_MODE CC_MODE WX_MODE FTO_MODE WF_MODE IREC_MODE UREC_MODE TDIS_MODE CDIS_MODE
[INDEX]
SCN_MODE : CTM_MODE : QSH_MODE : CC_MODE : WX_MODE :
FTO_MODE : WF_MODE : IREC_MODE : : UREC_MODE TDIS_MODE : CDIS_MODE :
Chanel Index Reserve Reserve Reserve NORMAL A_ONLY SAME_1 SAME_2 SAME_3 SAME_4 SAME_5 ALL_FIPS Reserve Reserve Reserve Folder Name Session Name Session Name
Remote Command
8/38
When you send the channel index of 0xFFFFFFFF,
scanner start to scan from top channel
If temporary clock was set and go to discovery mode, scanner sends NG response.
If temporary clock was set and go to wx alert mode, scanner sends NG response.
Radio Controller
(1)
JPM,OK[\r]
--------------------------------------------------------------------------------------------------------------------------------------DTM Get/Set Date and Time. ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
DTM[\r]
(2)
DTM,[DayLightSaving],[YYYY],[MM],[DD],[hh],[mm],[ss][\r]
Radio Controller
(1)
DTM,[DayLightSaving],[YYYY],[MM],[DD],[hh],[mm],[ss],[RTC Status][\r]
(2)
DTM,OK[\r]
[RTC Status]:
0:RTC NG 1:RTC OK
--------------------------------------------------------------------------------------------------------------------------------------LCR Get/Set Location and range. ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
LCR[\r]
(2)
LCR,[LATITUDE],[LONGITUDE],[RANGE][\r]
Radio Controller
(1)
LCR,[LATITUDE],[LONGITUDE],[RANGE][\r]
(2)
LCR,OK[\r]
LATITUDE and LONGITUDE is degree format.
--------------------------------------------------------------------------------------------------------------------------------------AST Analize Start ---------------------------------------------------------------------------------------------------------------------------------------
See Analize Command Tab
--------------------------------------------------------------------------------------------------------------------------------------APR Analize Pauze/Resume ---------------------------------------------------------------------------------------------------------------------------------------
See Analize Command Tab
--------------------------------------------------------------------------------------------------------------------------------------URC User Record Control ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
URC[\r]
Remote Command
9/38
(2)
URC,[STATUS][\r]
Radio Controller
(1)
URC,[STATUS][\r]
(2)
URC,OK[\r]
URC,ERR,[ERROR CODE][\r]
[ERROR CODE] : 0001: FILE ACCESS ERROR 0002: LOW BATTERY 0003: SESSION OVER LIMIT 0004: RTC LOST
[STATUS] :0:Stop, 1:Start
--------------------------------------------------------------------------------------------------------------------------------------MNU Menu Mode ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
MNU,[MENU_ID],[INDEX][\r]
Radio Controller
(1)
MNU,OK[\r]
MENU_ID
INDEX
TOP
-
MONITOR_LIST
-
SCAN_SYSTEM
Syetm Index
SCAN_DEPARTMENT Department Index
SCAN_SITE
Site Index
SCAN_CHANNEL Channel Index
SRCH_RANGE
Custom Bank Index
SRCH_OPT
-
CC
-
CC_BAND
-
WX
-
FTO_CHANNEL
FTO Channel Index
SETTINGS
-
BRDCST_SCREEN -
Menu Position
Top (Main) Menu Select Lists to Monitor menu System Menu Department Menu Site Menu Channel Menu Custom Search Bank Menu Search/Close Call Opt menu Close Call Menu Clsoe Call Band Menu WX Operation Menu Tone out Channel Menu Settings Menu Broadcast screen Menu
--------------------------------------------------------------------------------------------------------------------------------------MSI Menu Status Info ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
MSI[\r]
Radio Controller
(1)
MSI,<XML>,[\r]
<?xml version="1.0" encoding="utf-8"?>[\r]
<MSI Name=" Title " Index="xxxxxx " >[\r]
:
:
</MSI>[\r]
format is XML. See sheet MSI tab
Remote Command
10/38
--------------------------------------------------------------------------------------------------------------------------------------MSV Menu Set Value ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
MSV,[RSV],[VALUE][\r]
Radio Controller
(1)
MSV,OK[\r]
VALUE select type menu : selected item index input type menu : inputted string
Note
Replace comma(,) to tab(\t), if value contain ,(comma).
--------------------------------------------------------------------------------------------------------------------------------------MSB Menu Structure Back ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
MSB,[RSV],[RET_LEVEL][\r]
Radio Controller
(1)
MSB,OK[\r]
RET_LEVEL
"RETURN_PREVOUS_MODE"
""
exit menu mode 1 level back
--------------------------------------------------------------------------------------------------------------------------------------GST Get scanner status (for WF) ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
GST[\r]
Radio Controller
(1)
GST,[DSP_FORM],[L1_CHAR],[L1_MODE],[L2_CHAR],[L2_MODE],
[L3_CHAR],[L3_MODE],,[L20_CHAR],[L20_MODE],
[MUTE],[RSV],[RSV],
[WF_MODE],[FREQ],[MOD],[MF_POS],
[CF],[LOWER],[UPPER],[RSV],[FFT_SIZE][\r]
[WF_MODE] SCANNER MODE ( 0 : Normal Mode, 1 : Waterfall, 2 :Menu/Direct Entry) ( Normal Mode means SDS Link does not an effective mode. Ex scan mode, search mode,
[FREQ] Mark Frequency [MOD] Modulation [MF_POS] Marker position [CF] Center Frequency [LOWER] Lower Frequency [UPPER] Upper Frequency [FFT_SIZE] FFT Area Size (0 :25%, 1:50%, 2:75%, 3:100%)
Remote Command
11/38
if Lx_CHAR or Lx_MODE is all ' '(0x20), it will be convertered "". if Lx_CHAR has "," (comma), "," (comma) will be changed "\t".
--------------------------------------------------------------------------------------------------------------------------------------PWF Push Waterfall FFT Information ---------------------------------------------------------------------------------------------------------------------------------------
Controller Device
(1)
PWF,[FFT_TYPE],[ON/OFF][\r]
Device Controller
(1)
PWF,[DATA1],[DATA2],,[DATA_n],[\r]
[FFT_TYPE]
1 Dispalyed FFT (240)
--------------------------------------------------------------------------------------------------------------------------------------GWF GetWaterfall FFT Information ---------------------------------------------------------------------------------------------------------------------------------------
Controller Radio
(1)
GWF,[TYPE],[ON/OFF][\r]
Radio Controller
(1)
GWF,[DATA1],[DATA2],,[DATA240],[\r]
[FFT_TYPE]
1 Dispalyed FFT (240)
Remote Command
12/38
Favorites List System Department Site Conventional frequency TGID in ID Scan TGID in ID Search Site frequency Avoiding TGID in ID Search Search Avoiding frequency Close Call WX Tone-Out mode Search with scan frequency CC Hits Channel Custom Search Bank Custom Search frequency Quick Search frequency Repeater Find frequency
Target Key Word
GLT
1st
2nd
FL
[none]
SYS
[Parent FL Index]
DEPT
[Parent Sys Index]
SITE
[Parent Sys Index]
CFREQ
[Parent Dept Index]
TGID
[Parent Dept Index]
STGID
---
SFREQ
[Parent Sit Index]
ATGID
[Parent Sys Index]
AFREQ
[none]
CC
---
WX
[none]
FTO
[none]
SWS_FREQ
---
CCHIT
[Parent Dept Index]
CS_BANK
[none]
CS_FREQ
---
QS_FREQ
---
RPTR_FREQ
---
IREC_FILE UREC_FOLDER UREC_FILE TRN_DISCOV CNV_DISCOV BAND_SCOPE
[none] [none] Folder Index [none] [none]
---
comand
NXT/PRV
1st
2nd
---
Sys Index
[none]
Dept Index [Parent Sys Index]
Site Index
[none]
Chan Index
[none]
Chan Index
[none]
TGID
[Site Index]
---
---
---
[none]
[none]
WX Chan Index
[none]
FTO Chan Index
[none]
Frequency [Parent Dept Index]
CC Chan Index
[none]
---
Frequency Parent Bank index
Frequency
[none]
Frequency
[none]
HLD
AVD
1st
2nd
1st
2nd
---
---
Sys Index
[none]
Sys Index
[none]
Dept Index [Parent Sys Index] Dept Index
[none]
Site Index
[none]
Site Index
[none]
Chan Index
[none]
Chan Index [none]
Chan Index
[none]
Chan Index [none]
TGID
[Site Index]
--- (Use ATGID)
---
---
---
TGID
Parent sys index
---
[Frequency] [none]
[none]
[none]
--- (Use AFREQ)
WX Chan Index
[none]
---
FTO Chan Index
[none]
---
Frequency [Parent Dept Index]
--- (Use AFREQ)
CC Chan Index
[none]
CC Chan Index
[none]
---
---
Frequency Parent Bank index
--- (Use AFREQ)
Frequency
[none]
--- (Use AFREQ)
Frequency
[none]
--- (You can't avoid Repeater Frequency)
[none]
File Index
[none]
--- (You can't select folder) --- (You can't select folder)
File Index
[none]
File Index
[none]
---
---
---
---
Frequency
[none]
Frequency
[none]
--- (You can't avoid)
--- (You can't avoid)
--- (You can't avoid)
TGID
[none]
Frequency
[none]
---
Note 1 Note 2 Note 3
[none] '---
means Parameter is none. means invarild command
If you want ot avoid 406.0MHz in Quick Search mode,
"AVD,AFREQ,4060000,,1\r"
is right.
"AVD,QS_FREQ,4060000,,1\r" is bad command.
If App sends "HLD","NXT" or "PRV"in Repeater Find mod, the scanner cancels Repeater Find mod and returns to previous mode(Custom Search/Quick Search/ Close Call)
"Unkown" department in ID Search is virtual department. You can hold, next and previous "Unkown" department but can't avoid it. "Unkown" department needs parent system index. Another department doesn't need parent system index. Both is OK that you set blank or system index for 2nd parameter.
tkd and 1st,2nd opt
13/38
GLT is command which PC get xx list form scanner.
Controller Radio
(1) GLT,FL (2) GLT,SYS,[fl_index] (3) GLT,DEPT,[system_index] (4) GLT,SITE,[system_index] (5) GLT,CFREQ,[dept_index] (6) GLT,TGID,[dept_index] (7) GLT,SFREQ,[site_index] (8) GLT,AFREQ (9) GLT,ATGID,[system_index] (10) GLT,FTO (11) GLT,CS_BANK (12) GLT,UREC (13) GLT,IREC_FILE (14) GLT,UREC_FILE,[folder_index] (15) GLT,TRN_DISCOV (16) GLT,CNV_DISCOV
Favorites List System Department Site Conventional Frequency TGID Site Frequency Search Avoding Frequencies Search Avoiding TGID Fire Tone Out Custom Search Bank User Record Inner Record File User Record File Trunk Discovery Conventional Discovery
Radio Controller
(1) GLT (2) GLT (3) GLT (4) GLT (5) GLT (6) GLT (7) GLT (8) GLT (9) GLT (10) GLT (11) GLT (12) GLT (13) GLT (14) GLT (15) GLT (16) GLT
FL
Index
SYS
Index
DEPT
Index
SITE
Index
CFREQ Index
TGID
Index
SFREQ Index
AFREQ Freq
ATGID TGID
FTO
Index
CS_BANK Index
UREC Index
IREC_FILE Index
UREC_FILE Index
TRN_DISCOV Name
CNV_DISCOV Name
Name MyId MyId MyId MyId MyId Freq Avoid Avoid Freq Name Name Name Name
Delay
Lower
Monitor Name Name Name Name Name
Q_Key Avoid Avoid Avoid Avoid Avoid
N_Tag Type Q_Key Q_Key Freq TGID
Q_Key N_Tag
Mod
SAS
SAL
Audio Type SvcType N_Tag
SvcType N_Tag
Short word means: Q_Key : Quick Key N_Tag : Number Tag Freq : Frequency Mod : Modulation SAS : Sub Audio Setting (CTCSS/DCS/P25NAC/Color Code/RAN, Area)
index Mod Lower
Time Time Logging Upper
Name Name Upper
Duration Mod
DeptName DeptIndex
ToneA ToneB
Mod
Step
Name = Folder Name
Name = File Name
Name = File Name
CompareDB SystemName SystemType SiteName TimeOutTimer AutoStore
Step
Delay
Logginig CompareDB Duration TimeOutTimer
AutoStore
Avoid Off T-Avoid
Name = Session Name Name = Session Name
The Index is kind of handle. PC uses index to Hold and Avoid. MyId is like RRDB ID.
GLT command
14/38
format will be XML.
ex
GLT,FL¥r GLT,<XML>,¥r <?xml version="1.0" encoding="utf-8"?>¥r <GLT>¥r
<FL Index="0" Name="Favorites List 1" Monitor="On" Q_Key="1" N_Tag="None" />¥r <FL Index="1" Name="Favorites List 2" Monitor="On" Q_Key="2" N_Tag="2" />¥r <FL Index="2" Name="Favorites List 3" Monitor="Off" Q_Key="3" N_Tag="999" />¥r </GLT>¥r
GLT command
15/38
PC/Tablet App need scanner internal information to show.
If the scanner recvies GSI command, it will send scanner internal information. Scaner internal information is like XML.
If the scanner receive PSI command, it outputs information periodically. User can change interval by parameter.
[ Ex .scan mode ]
<?xml version="1.0" encoding="utf-8"?> <ScannerInfo Mode="Trunk Scan Hold" V_Screen="trunk_scan">
<MonitorList Name="Full Database" Index="4294967295" ListType="FullDb" Q_Key="None" N_Tag="None" DB_Counter="3" /> <System Name="Calcasieu" Index="283" Avoid="Off" SystemType="Conventional" Q_Key="None" N_Tag="None" Hold="On" /> <Department Name="Calcasieu Parish - Parish Fire & Medical" Index="286" Avoid="Off" Q_Key="None" Hold="Off" /> <ConvFrequency Name="DeQuincy Fire Department" Index="290" Avoid="Off" Freq=" 154.4150MHz"
Mod="NFM" N_Tag="None" Hold="On" SvcType="Fire Dispatch" P_Ch="Off" SAS="All" SAD="None" LVL="0" IFX="Off" /> <AGC A_AGC="Off" D_AGC="Off" /> <DualWatch PRI="Off" CC="Off" WX="Off" /> <Property
VOL="0" SQL="9" Sig="0" WiFi="3" Att="Off" Rec="Off" KeyLock="Off" P25Status="None" Mute="Mute" Backlight="100"
Rssi="0.377" /> <ViewDescription>
<InfoArea1 Text="F0:01234-6*789" /> <InfoArea2 Text="S3:01234-6*---" /> <PopupScreen Text="Quick Save?\n"/> </ViewDescription>
System xxxxxx
Department xxxxxx
Channel xxxxxx
see PSI, GSI Elemen PSI, GSI Attribute Attribute (ViewDescription)
PSI, GSI command Summary
16/38
All mode Elements
ScannerInfo Property AGC DispFormat ViewDescription ReplayDescription
(when the radio is wiewing override area ) (when the radio is in REPLAY mode)
ScannerInfo is the root node.
Depend on mode elements
Scan mode
Search
Signal Temporary discovery
Analyze
WF
conventional_scan trunk_scan
custom_with_scan cchits_with_scan custom_search
quick_search close_call
cc_searching tone_out wx_alert
reverse_frequency repeater_find
discovery_conventional discovery_trunking analyze_system_status
rf_power_plot analyze waterfall
MonitorList
- - - - - - - - - - - - - -
System
- - - - - - - - - - - - - -
Department
- - - - - - - - - - - - - -
Site
-- - - - - - - - - - - - - - - -
ConvFrequency - - - - - - - - - - - - - - - - -
TGID
-- - - - - - - - - - - - - - - -
SiteFrequency
-
--------------
SrchFrequency - - - - - - - - - - -
CcHitsChannel
- - -- - - - - - - - - - - - - -
DualWatch
- - - - - - - -
SearchRange
- - - - - - - - - - - - - - -
SearchBanks
- - - -- - - - - - - - - - - - -
CC_Bands
- - - - - - -- - - - - - - - - -
CC_Counters
- - - - - - -- - - - - - - - - -
ToneOutChannel - - - - - - - - - - - - - - - - -
WxChannel
- - - - - - - - -- - - - - - - -
WxMode
- - - - - - - - -- - - - - - - -
ConventionalDiscovery -
-
-
-
-
-
-
-
-
-
-
--
-
-
-
-
TrunkingDiscovery - - - - - - - - - - - - - - - - -
SystemStatus
- - - - - - - - - - - - - -- - -
Analyze
- - - - - - - - - - - - - - - --
WaterfallBand
- - - - - - - - - - - - - - - - -
WaterfallSettings - - - - - - - - - - - - - - - - -
Elements in ViewDescription
InfoArea1 InfoArea2 OverWrite PopupScreen PlainText
Elements in ReplayDescription
File ReplayMode
PSI, GSI Elemen
17/38
ScannerInfo
Attribute Name Value Mode V_Screen
Property
Attribute Name Value
F
Off/On
VOL
0-29 or 0-15
SQL
0-19 or 0-15
Sig
0-4
WiFi
Off / 0-3 / AP
Battery
0.0-3.3
Att
Off/On/G-Att
Rec
Off/On
KeyLock
Off/On
P25Status
None/Data/P25 /DMR/CAP/CON/DT3/XPT
/NX9/NX4/ND9/ND4/IDS/NXD
Mute
Unmute/Mute
A_Led Dir Rssi
Off/Blue/Red/Magenta/Green/Cyan/Yellow/White Up/Down 0-
AGC
Attribute Name Value
A_AGC
Off/On
D_AGC
Off/On
DualWatch
Attribute Name Value
PRI
Off/DND/Priority
CC
Off/DND/Priority
WX
Off/Priority
Scan Mode Scan Hold Tone-Out Custom Search Custom Search Hold Quick Search Quick Search Hold Service Scan Service Scan Hold Trunk Scan Trunk Scan Hold Close Call Only Close Call Menu tree
plain_text conventional_scan trunk_scan custom_with_scan cchits_with_scan custom_search quick_search close_call cc_searching tone_out wx_alert discovery_conventional discovery_trunking reverse_frequency repeater_find direct_entry menu_selection menu_input analyze_system_status analyze
MonitorList
Attribute Name Value
Name
ASCII code , Max length 64
Index
0-
ListType
FullDb/FL/SWS
Q_Key
0-99/None
N_Tag
0-99/None
DB_Counter 0-65535, if counter overs 65535, counter will be 0.
System
Name Index Avoid SystemType Q_Key N_Tag Hold
Department
Name Index Avoid Q_Key Hold
ASCII code , Max length 64 0Off/T-Avoid/Avoid
0-99/None 0-99/None Off/On
ASCII code , Max length 64 0Off/T-Avoid/Avoid 0-99/None Off/On
Conventional Motorola EDACS LTR P25 Trunk P25 One Frequency MotoTRBO Trunk DMR One Frequency NXDN Trunk NXDN One Frequency
PSI, GSI Attribute
18/38
Site
Name Index Avoid Q_Key Hold Mod
ConvFrequency
Name Index Avoid Freq Mod N_Tag Hold SvcType P_Ch SAS SAL SAD RecSlot LVL IFX TGID U_Id
ASCII code , Max length 64 0Off/T-Avoid/Avoid 0-99/None Off/On Auto/NFM/FM
ASCII code , Max length 64 0Off/T-Avoid/Avoid xxxx.xxxxMHz Auto/AM/NFM/FM/WFM/FMB 0-999/None Off/On See Sheet : "Service type" Off/On See Sheet : "Sub Audio" Off/On See Sheet : "Sub Audio" Slot 1/2/None -3/-2-/-1/0/1/2/3 Off/On TGID xxxx/None UID xxxx/None
TGID
Name Index Avoid TGID SetSlot RecSlot N_Tag Hold SvcType P_Ch LVL
ASCII code , Max length 64 0Off/T-Avoid/Avoid TGID:xxxx Slot 1/2/Any Slot 1/2/None 0-999/None Off/On See Sheet : "Service type" Off/On -3/-2-/-1/0/1/2/3
SiteFrequency
Freq SAS SAD IFX
xxxx.xxxxMHz See Sheet : "Sub Audio" See Sheet : "Sub Audio" Off/On
SearchBanks
Attribute Name Value
Index
0-9
BankStatus xxxxxxxxxx : 0=Off/ 1=On order=0123456789
Name
ASCII code , Max length 64
BankNo
0-9
CC_Bands
Attribute Name Value BandStatus xxxxxxx : 0=Off/ 1=On order=0123456
SrchFrequency
Attribute Name Value
Avoid
Off/T-Avoid/Avoid
Freq
xxxx.xxxxMHz
Mod
Auto/AM/NFM/FM/WFM/FMB
PSI, GSI Attribute
19/38
Hold SAD RecSlot TGID U_Id IFX
Off/On See Sheet : "Sub Audio" Slot 1/2/None TGID xxxx/None UID xxxx/None Off/On
CcHitsChannel
Attribute Name Value
Name
ASCII code , Max length 64
Index
0-
Avoid
Off/T-Avoid/Avoid
CH_No
0-9
Freq
xxxx.xxxxMHz
Mod
Auto/AM/NFM/FM/WFM/FMB
Hold
Off/On
SAD
See Sheet : "Sub Audio"
LVL
-3/-2-/-1/0/1/2/3
IFX
Off/On
SearchRange
Lower Upper Mod Step
xxxx.xxxxMHz xxxx.xxxxMHz Auto/AM/NFM/FM/WFM/FMB
ToneOutChannel
Name Index CH_No Freq Mod Hold LVL IFX ToneA ToneB
WxMode Mode SAME
WxChannel
Name Index CH_No Freq Mod Hold LVL IFX
ASCII code , Max length 64 10-31 xxxx.xxxxMHz Auto/AM/NFM/FM/WFM/FMB Off/On -3/-2-/-1/0/1/2/3 Off/On xxxxHz xxxxHz
"Monitor Weather" or "Weather Alert" "Alert Only" or SAME group name
ASCII code , Max length 64 01-7 xxxx.xxxxMHz FM Off/On -3/-2-/-1/0/1/2/3 Off/On
ConventionalDiscovery Lower Upper Mod Step Freq SAD RecSlot PastTime HitCount TGID U_Id IFX
xxxx.xxxxMHz xxxx.xxxxMHz Auto/AM/NFM/FM/WFM/FMB
xxxx.xxxxMHz See Sheet : "Sub Audio" Slot 1/2/None
TGID xxxx/None UID xxxx/None Off/On
PSI, GSI Attribute
20/38
TrunkingDiscovery SystemName SiteName TGID TgidName SAD RecSlot PastTime HitCount U_Id
ASCII code , Max length 64 ASCII code , Max length 64
See Sheet : "Sub Audio" Slot 1/2/None
UID xxxx/None
SystemStatus SystemName SiteName Signal Quality Activity SystemID SystemSubID SiteID WacnID NAC Color RAN Area Att Freqs P25Status
ASCII code , Max length 64 ASCII code , Max length 64 0-100 0-100 0-100 0-0x1FFFF 0-99 0-4095 0-0xFFFFF 0-0xFFF 0-15 0-63 0-1 Off/G-Att 0-16 None/Data/P25/DMR/CAP/CON/DT3/XPT /NX9/NX4/ND9/ND4/IDS/NXD
RfPowerPlot Frequency Modulation SampleRate Att B01 B02 B03 B04 B05 B06 B07 B08 B09 B10 B11 B12 B13 B14 B15 B16 B17 B18 B19 B20 B21 B22 B23 B24 B25 B26 B27 B28 B29 B30 B31
xxxx.xxxxMHz Auto/AM/NFM/FM/WFM/FMB 100ms/200ms/400ms/800ms Off/G-Att 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100 0 - 100
PSI, GSI Attribute
21/38
B32
0 - 100
B33
0 - 100
B34
0 - 100
Analyze
Msg1
ASCII code , Max length 64
Msg2
ASCII code , Max length 64
SystemName ASCII code , Max length 64
SiteName
ASCII code , Max length 64
Att
Off/G-Att
Used by following mode
LCN Finder
Current Activity
LCN Monitor
Activity Log
WaterfallBand Lower Center Upper Mod Step
Span
Limit
WaterfallSettings MF Gain
xxxx.xxxxMHz xxxx.xxxxMHz xxxx.xxxxMHz Auto/AM/NFM/FM/WFM/FMB 5kHz/6.25kHz/7.5kHz/833kHz/10kHz/12.5kHz/ 15kHz/20kHz/25kHz/50kHz/100kHz 360kHz/720kHz/1.44MHz/2.88MHz/ 5.76MHz/8.64MHz/17.28MHz/ 0/1
xxxx.xxxxMHz Auto/0/1/.../15
PSI, GSI Attribute
22/38
<<Info Area and Override>>
Scanner has special view area on main screen. Info Area 1 and Info Area 2 are diplayed Quick keys status in scan mode or Banks status in custum search mode.
Over Write Area is displayed error message or scanning message on channel name area.
<ViewDescription> <InfoArea1 Text="F0:01234-6*789" /> <InfoArea2 Text="S3:01234-6*---" /> <OverWrite Text="No thing to scan">
</ViewDescription>
Info Area 1 Info Area 2
Fx:0123456789 Sx:0123456789
Fx:0123456789 Sx:0123456789
channel name
BCD536HP image
channel name
BCD436HP image
Over Write Area
<<Popup Screen>>
Scanner has popup screen. It shows temporary view for 1-2 seconds. The popup screen is shown on main screen. It is like toaster in Android OS.
<ViewDescription> <PopupScreen Text="Global ATT\nOn"/>
</ViewDescription>
Global ATT On
Popup screen has a few buttons. This popup screen is not cleared automatically. Scanner waits pressed button by user.
It is like Dialog box.
<ViewDescription> <PopupScreen Text="USB Cable Detected
 Select USB mode

Mass Storage="E" / Serial Port=".""> <Button Text=""E" (Yes)" KeyCode="E" /> <Button Text=""." (No)" KeyCode="." /> </PopupScreen>
System xxUxxSxBxCable Detected
Select USB mode
Mass Storage="E" / Serial Port="." Department xxxxxx
'E' (Yes)
'.' (No)
Channel xxxxxx
In this case Popup screen has 2 buttons.
If 'E' (Yes) button is pressed, App shoud send "KEY,E,P". E is KeyCode.
<<PlainText view>>
Plain Text view is kind of view mode in main screen.
ex. <ViewDescription> <PlainText Text="Copyright 2014"/> <PlainText Text="Uniden America Corp."/> <PlainText Text="All Rights Reserved."/> <PlainText Text=""/> </ViewDescription>
Attribute (ViewDescription)
23/38
<< ReplayDescription >>
<ReplayDescription> <File Index="2" /> <ReplayMode Mode="USER_REC" />
</ReplayDescription>
Attribute (ReplayDescription)
24/38
Basic Rule for Response scanner information
MyId
The system, department, site and channel on Full Database have MyId. The system, department, site and channel copied form full database have MyId. But system, department, site and channel which user created don't have MyId.
MyId relates RadioReference ID.
ID is shown xxId=xx.
e.x. CountyId=5 AgencyId=15
ID list HPDB ID
CountyId AgencyId TrunkId CGroupId CFreqId SiteId TGroupId Tid
description
Conventional System ( County ) Conventional System ( Agency ) Trunked System Conventional Department Conventional Frequncy Trunked Site Trunked Department Trunked Channel
RRDB ID
ctid aid sid scid fid siteId tgCid tgId
Note : Search with Scan doesn't have MyId.
Index
The index will be used, when you hold or avoid system, department and channel. It is decided when data is downloaded to RAM. It is invalid if DB_Counter differs.
Name
ASCII code (20h-7eh) Max Length 64 characters
PSI, GSI Basic rule
25/38
------------------------------------------------------------------------------------------
AST
Analize Start
------------------------------------------------------------------------------------------
Current Activity
Controller Radio AST,CURRENT_ACTIVITY,[Site Index]\r
Radio Controller format will be XML. Data is sent in 200ms interval
C-Ch No
V-Ch No
LCN Frequency SystemID SiteID TGID Type
LCN Frequency TGID
Unit ID
MOD TGID Type
Parameter
LCN
LCN(decimal)
Freq
Frequency
TGID
Talk Group ID(decimal)
Unit ID
Unit ID(decimal)
MOD
Mode
Analog
Digital
Encrypted
TgidType Talk Group ID type
Control Channel
Encrypted
Patch
Unknown
TGID
I-CALL
SystemID System ID(hex)
SiteID
Site ID(decimal)
XML example AST,<XML>,\r <?xml version="1.0" encoding="utf-8"?>\r <AST>\r
<CurrentActivity LCN="1" Freq="851.0125" SystemID="0001h" SiteID="0" TgidType="Control Channel" />\r <CurrentActivity LCN="2" Freq="851.0375" TGID="16" UnitID="32" MOD="Analog" TgidType="TGID" />\r <CurrentActivity LCN="3" Freq="851.0625" TGID="64" UnitID="128" MOD="Analog" TgidType="TGID" />\r
<CurrentActivity LCN="32" Freq="851.6125" TGID="256" UnitID="512" MOD="Analog" Tgidype="TGID" />\r </AST>\r
Before sending AST command, please go to Scan Mode to load the hpdb data
LCN Monitor
Controller Radio AST,LCN_MONITOR,[Site Index]\r
Radio Controller format will be XML. Data is sent in 1s interval
No
LCN Frequency Status
Parameter LCN Freq ReceiveStaus
LCN(decimal) Frequency 1 or 0
XML example
AST,<XML>,\r <?xml version="1.0" encoding="utf-8"?>\r <AST>\r
<LcnMonitor LCN="1" Freq = "851.0125" ReceiveStaus="1" />\r <LcnMonitor LCN="2" Freq = "851.0250" ReceiveStaus="0" />\r <LcnMonitor LCN="3" Freq = "851.0375" ReceiveStaus="0" />\r <LcnMonitor LCN="4" Freq = "851.0500" ReceiveStaus="0" />\r <LcnMonitor LCN="5" Freq = "851.0625" ReceiveStaus="0" />\r <LcnMonitor LCN="32" Freq = "851.4000" ReceiveStaus="0" />\r </AST>\r
Before sending AST command, please go to Scan Mode to load the hpdb data
Analyze Command
26/38
Activity Log If temporary clock was set and go to activity log mode, scanner sends NG response.
Controller Radio AST,ACTIVITY_LOG,[Site Index]\r
Radio Controller AST,ACTIVITY_LOG,[Time],[Data],[Message],[Description]
Parameter Time Data Message Description1-5
MM/DD/YYYY hh:mm:ss Received raw data (depends on system type) Message type (Depends on system type) Message description (depends on system type). Number of description is depends on message type.
Motorola
Data "<cmd>/<prv>/<id>" cmd command field prv private bit id id field
0-1023(decimal) 0 or 1 0-65535(decimal)
Message System ID Site ID Talkgroup Voice Channel Grant Talkgroup Voice Channel Grant Update I-Call Voice Channel Grant Update Individual Call Patch/MultiSelect Voice Channel Grant Patch/Multiselect Voice Channel Grant Update Patch List Patch Cancel Control First OSW Receive Error
Description1 Sid: Site: Tid: Tid: Uid: Uid: Pid: Pid: Pid: Pid:
Description2
Uid:
Uid: Uid: Mid
Description3
Lcn: Lcn: Lcn: Lcn: Lcn: Lcn:
Description4
Sts: Sts:
Sts: Sts:
Description Sid System ID(hex) Site Site ID(decimal) Tid Talk Group ID(decimal) Uid Unit ID(decimal) Pid Patch ID(decimal) Mid Patch Member ID (decimal) Lcn LCN(decimal) Sts Status bit
Normal Talkgroup All Talkgroup Emergency Talkgroup Patch Emergency Patch Emergency Multi-Group Multi-Select DES Encryption Talkgroup DES All Talkgroup DES Emergency DES Talkgroup Patch DES Emergency Patch DES Emergency Multi-Group Multi-Select DES TG Mod Modulation Analog Digital
P25 Standard
Data
"<opecode>/<data>"
opecode opecode
data
TSBK
1byte:00-FF(hex) 12bytes:000000000000000000000000-FFFFFFFFFFFFFFFFFFFFFFFF(hex)
Message Group Voice Channel Grant Group Voice Channel Grant Explicit Group Voice Channel Grant Update Group Voice Channel Grant Update Explicit Unit To Unit Voice Channel Grant Unit To Unit Voice Channel Grant Extended Unit To Unit Answer Request Unit To Unit Answer Request Extended Unit To Unit Voice Channel Grant Update Unit To Unit Voice Channel Grant Update Extended Telephone Voice Channel Grant Telephone Interconnect Answer Request
Description1 Lcn: LcnT: Lcn: LcnT: Lcn: LcnT: Tad: Tad: Lcn: LcnT:
Description2 Gad: Gad: Gad: LcnR: Tad: Tad: Src: Src: Tad: Tad:
Description3 Sad: Sad: Lcn: Gad: Sad: Sad:
Sad: Sad:
Description4 LcnR: Gad:
LcnR:
LcnR:
Description5 Mod: Mod:
Description5
Analyze Command
27/38
Identifier Update for X2TDMA Individual Data Channel Grant Group Data Channel Grant Group Data Channel Announcement Group Data Channel Announcement Explicit SNDCP Data Channel Grant SNDCP Data Page Request SNDCP Data Channel Announcement Explicit Status Update Status Query Message Update Radio Unit Monitor Command Call Alert Acknowledge Response FNE Queued Response Extended Function Command Deny Response Group Affiliation Response Secondary Control Channel Broadcast Explicit Group Affiliation Query Location Registration Response Unit Registration Response Unit Registration Command Authentication Command De-Registration Acknowledge Identifier Update for TDMA Identifier Update for VHF/UHF Bands Time and Date Announcement Roaming Address Command Roaming Address Update System Service Broadcast Secondary Control Channel Broadcast RFSS Status Broadcast RFSS Status Broadcast Extended Network Status Broadcast Network Status Broadcast Extended Adjacent Status Broadcast Identifier Update for non-VHF/UHF Bands Protection Parameter Broadcast Protection Parameter Update Receive Error
Iden: Iden:
Sid: Sid: Wacn: Wacn: Iden:
Type: Bw:
Sub: Sub: Sid: Sid: Bw:
Description
Lcn
LcnT
LcnR
Gad
Sad
Tad
Src
Iden
Bw
Tofs
Csp
Bfrq
Sid
Sub
Site
Wacn
Type
LCN(decimal) Transmit channel LCN(decimal) Receive channel LCN(decimal) Group Address(decimal) Source Address(decimal) Target Address(decimal) Source ID(decimal) Identifier(decimal) Band Width(decimal) Transmit Offset(decimal) Channel Spacing(decimal) Base Frequency(decimal) System ID(hex) RF Sub-system ID(decimal) Site ID(decimal) WACN ID(hex) Channel Typedecimal)
EDACS
Data "<data>" data message data 28bits:0000000-FFFFFFF(hex)
Message Site ID Talkgroup Voice Channel Grant Talkgroup Voice Channel Grant Update I-Call Voice Channel Grant Update Patch Voice Channel Grant Patch Voice Channel Grant Update Patch List First OSW Receive Error
Description1 Site: Tid: Tid: Uid: Pid: Pid: Pid:
Description2 Uid:
Uid: Mid:
Description Site Tid Uid Pid Mid Lcn Sts
Site ID(decimal) Talk Group ID(decimal 1-2047: AFS, decimal 2048-65535: Decimal) Unit ID(decimal) Patch ID(decimal) Patch Member ID (decimal) LCN(decimal) Status bit
Tofs: Tofs:
Site: Site: Lcn: LcnT: Tofs:
Description3 Lcn: Lcn: Lcn: Lcn: Lcn: Lcn:
Csp: Csp: Lcn: LcnT: LcnR: Csp:
Description4 Sts: Sts: Sts: Sts: Sts:
Bfrq: Bfrq: LcnR: Bfrq:
Description5
Analyze Command
28/38
Normal Talkgroup Talkgroup Patch Emergency Emergency Patch Digital Talkgroup Digital Patch Digital Emergency Digital Emergency Patch I-Call Digital I-Call
LTR
"<data>" data area code goto home id free
Data
<area_code>/<goto>/<home>/<id>/<free>
Area Code
0 or 1
Goto Repeater
0-31(decimal)
Home Repeater
0-31(decimal)
Id Field
0-255(decimal)
Free Repeater
0-31(decimal)
Message Repeater Idle Talkgroup Voice Channel Grant Update Turn-off Code
Description1 Tid: Tid: Tid:
Description2 Rpt: Rpt: Rpt:
Description3 Goto: Goto: Goto:
Description4 Free: Free: Free:
Tid Rpt Goto Free
Talk Group ID (Area-Home-Id) Transmitting Repeater Goto Repeater Free Repeater
DMR/MotoTRBO
Data
"<opcode>/<fid>/<id>/<ch>/<slot>/<prv>/<emergency>"
opcode
Full/Short Link Control Opcode 00-3F (Hex)
Control Signal Block Opcode
00-3F (Hex)
fid
Feature ID
00(DMR), 06(Connect Plus), 10(Capacity Plus) (Hex)
id
TGID
0-16777215 (Decimal)
ch
LCN
0-4095 (Decimal)
slot
TDMA Slot
1 or 2 or 15(None) (Decimal)
prv
Privacy
0 or 1
emergency Emergency
0 or 1
Message Talkgroup Voice Channel Grant Talkgroup Voice Channel Link Control Unit to Unit Voice Channel Grant Unit to Unit Voice Channel Link Control Broadcast Talkgroup Voice Channel Grant Capacity Plus Voice Channel Grant Capacity Plus Update Capacity Plus Site ID Linked Capacity Plus Site ID Connect Plus Voice Channel Grant Connect Plus Update Connect Plus Network ID DMR Network ID Idle
Description1 Tid: Tid:
Uid Src: Uid Src:
Tid: Tid: Sid: Sid: Sid: Tid:
Sid: Sid:
Description2 Uid: Uid:
Uid Dst: Uid Dst:
Uid: Uid: Site: Site: Site: Uid:
Site: Site:
Description3 Color Code: Color Code: Color Code: Color Code: Color Code: Color Code: Color Code: Color Code: Color Code: Color Code:
Color Code: Color Code:
Description4 Lcn: Lcn: Lcn: Lcn: Lcn: Lcn: Lcn: Lcn: Lcn: Lcn:
Lcn: Lcn:
Description
Sid
Network ID (Hex)
Site
Site ID (Decimal)
Tid
Talk Group ID (Decimal)
Uid
Unit ID (Decimal)
Uid Src
Source Unit ID (Decimal)
Uid Dst
Destination Unit ID (Decimal)
Color Code Color Code (Decimal)
Lcn
LCN (Decimal)
Slot
TDMA Slot (Decimal)
Before sending AST command, please go to Scan Mode to load the hpdb data
Description5
Description5 Slot: Slot: Slot: Slot: Slot: Slot: Slot: Slot: Slot: Slot: Slot: Slot:
NXDN
Data
"<call type>/<home ch>/<id>/<ch>/<prv>/<emergency>"
call type Call Type
0-7 (Decimal)
home ch Home Channel
0-31 (IDAS only, Decimal)
id
TGID
NEXEDGE: 0-65535, IDAS: 0-2047 (Decimal)
ch
LCN
0-1023 (Decimal)
prv
Privacy
0 or 1
emergency Emergency
0 or 1
Analyze Command
29/38
Message Replying to requesting communication
Performing voice communication
Sending Encryption init vector Assignment of traffic channel to VC
Existence of assigned traffic channel to VC
Transmission released Idle Disconnecting Site configuration information Service information which site provides Information of site's control channel IDAS go to Repeater
Description1 Tid:
Uid Src: Tid:
Uid Src:
Tid: Uid Src:
Tid: Uid Src:
Description2 Uid:
Uid Dst: Uid:
Uid Dst:
Uid: Uid Dst:
Uid: Uid Dst:
Description3 Area Code: Area Code: RAN: or Area Code: RAN: or Area Code:
RAN: or Area Code: RAN: or Area Code: RAN: or Area Code: RAN: or Area Code:
Description4 Home Ch: Home Ch:
LCN: or Home Ch: LCN: or Home Ch: LCN: or Home Ch: LCN: or Home Ch:
Sys: Sys: Sys: Tid: Uid Src:
Site: Site: Site: Uid: Uid Dst:
RAN: RAN: RAN: Area Code: Area Code:
Cch LCN: or DFA
Cch LCN: or DFA Go to Repeater: Go to Repeater:
Description
Sys
System ID (Decimal)
Site
Site ID (Decimal)
Tid
Talk Group ID (Decimal)
Uid
Unit ID (Decimal)
Uid Src
Individual Call Source Unit ID (Decimal)
Uid Dst
Individual Call Destination Unit ID (Decimal)
RAN
NEXEDGE RAN (Decimal)
Area Code
IDAS Area Code (Decimal)
LCN
NEXEDGE LCN (Decimal)
Go to Repeater IDAS Repeater Channel (Decimal)
Home Ch
IDAS Home Channel (Decimal)
Cch LCN
NEXEDGE Control Channel (Decimal)
DFA
NEXEDGE Direct Frequency Assignment
Before sending AST command, please go to Scan Mode to load the hpdb data
Description5
LCN Finder
Controller Radio AST,LCN_FINDER,[Site Index]\r
Radio Controller format will be XML. Data is sent in 500ms interval
Parameter
Freq
Frequency
AccuracyStatus Accuracy Level (Total 30 status)
0 Unknown
1 Level 1
2 Level 2
3 Level 3
4 Level 4
5 Found
6 Disable
Condition Searching All Lcn Found
XML example
AST,<XML>,\r <?xml version="1.0" encoding="utf-8"?>\r <AST>\r
<LcnFinder Freq="851.0125" AccuracyStatus="566666666666666666666666666666" <LcnFinder Freq="851.0375" AccuracyStatus="610000000000000000000000000000" <LcnFinder Freq="851.0625" AccuracyStatus="603000000000000000000000000000"
<LcnFinder Freq="851.6125" AccuracyStatus="600000000000000000000000000000" <LcnFinder Condition="Searching"/> </AST>\r
Before sending AST command, please go to Scan Mode to load the hpdb data
Band Scope
Data is sent in 10ms interval Controller Radio
AST,BAND_SCOPE,[Center frequency],[Span],[Step],[Modulation]\r
[Center frequency] 250000 - 13000000
[Span] 200 8000
Removed in SDS100
Analyze Command
30/38
400 10000 600 20000 800 40000 1000 60000 2000 80000 4000 100000 6000 200000 [Step] 500 1500 625 2000 750 2500 833 5000 1000 10000 [Modulation] Auto AM NFM FM WFM FMB
Removed in SDS100
Radio Controller The data is output every time the frequency is changed AST,BAND_SCOPE,[Frequency],[RSSI_LEVEL]\r
Parameter Frequency Status
Frequency RSSI Level (0 - 100)
Raw Data Output
Controller Radio AST,RAW_DATA_OUTPUT,[Frequency],[Modulation],[Filter],[Global Attenuator]\r
[Frequency] 250000 - 13000000
[Modulation] Auto AM NFM FM WFM FMB
[Filter] 1=On 0=Off
[Global Attenuator] 1=On 0=Off
Removed in SDS100
Radio Controller Discriminator A/D sampling raw data (10 bit signed data) will be output by the radio. 10 bit data will be divided into High byte and Low byte, see data format in next table.
Interface of aw ata output mode is the only USB port. If you want to use the other remote command, please send after pause command.
System Status
Controller Radio AST,SYSTEM_STATUS,[site_index]\r
Radio Controller AST,OK\r
Rf Power Plot
Controller Radio AST,RF_POWER_PLOT,[Frequency],[Modulation],[Sampling Rate]\r
[Frequency] 250000 - 13000000
[Modulation] Auto AM NFM FM WFM
Removed in SDS100
Analyze Command
31/38
FMB [Sampling Rate]
100 200 400 800
Radio Controller AST,OK\r
------------------------------------------------------------------------------------------
APR
Analize Pauze/Resume
------------------------------------------------------------------------------------------
Controller Radio APR,[Analize Mode]\r
Parameter Analize Mode
SYSTEM_STATUS RF_POWER_PLOT CURRENT_ACTIVITY LCN_MONITOR ACTIVITY_LOG RAW_DATA_OUTPUT
Radio Controller APR,OK\r
Analyze Command
32/38
MSI
Attribute Name Value
Name
Menu title
Index
Menu index
MenuType TypeSelect/TypeInput/TypeLocation/TypeError
Value
Current set value
Selected
MenuItem
Attribute Name Value
Name
Item name
Index
Item index
Value
Menu item current value
MenuInput Attribute Name Value MaxLength 1-64 EnableKeys Characters which user can input. AddedInformation String
MenuLocation Attribute Name Value MaxLength 1EnableKeys Characters which user can input. IsLatitude "1"=Lan/ "0"= Lon
MenuErrorMsg
Attribute Name Value
Text
Error Message
ScanButton "1"=Enable / "0"=Disable
MSI
33/38
Service Type
id
PST1 PST2 PST3 PST4 PST5 PST6 PST7 PST8 PST9 PST10 PST11 PST12 PST13 PST14 PST15 PST16 PST17 PST18 PST19 PST20 PST21 PST22 PST23 PST24 PST25 PST26 PST27 PST28 PST29 PST30 PST31 PST32 PST33 PST34 PST35 PST36 PST37
Service Type Name
Multi-Dispatch Law Dispatch Fire Dispatch EMS Dispatch non Multi-Tac Law Tac Fire-Tac EMS-Tac non Interop Hospital Ham Public Works Aircraft Federal Business non non Railroad Other Multi-Talk Law Talk Fire-Talk EMS-Talk Transportation non non Emergency Ops Military Media Schools Security Utilities non non Corrections
Custom Service Type id Service Type Name
ST1 Custom 1 ST2 Custom 2 ST3 Custom 3 ST4 Custom 4 ST5 Custom 5 ST6 Custom 6 ST7 Custom 7 ST8 Custom 8 ST9 Racing Officials ST10 Racing Teams
Service type
34/38
Key code BCD536HP SDS100
Note
M
MENU
Menu Menu Key
F ( Rotary nob) Func F Key
L
AVOID
AVOID Avoid Key
1
1
1
1 Key
2
2
2
2 Key
3
3
3
3 Key
4
4
4
4 Key
5
5
5
5 Key
6
6
6
6 Key
7
7
7
7 Key
8
8
8
8 Key
9
9
9
9 Key
0
0
0
0 Key
.
. NO
. NO Dot key
E
E yes
E yes Enter Key
> ( Rotary nob) ( Rotary nob) Rotary Right
< ( Rotary nob) ( Rotary nob) Rotary Left
^ ( Rotary nob) ( Rotary nob) Rotary nob push
V
VOL
Backlight Volume nob push
Q
SQ
(none) Squelch nob push
Y
REPLAY
REPLAY Replay Key
A
SOFT 1
SOFT 1 BCD436HP : System
B
SOFT 2
SOFT 2 BCD436HP : Dept
C
SOFT 3
SOFT 3 BCD436HP : Channel
Z
ZIP
Zip Zip Key
T
SREV
(none) Service Type Key
R
RANG
RANG Range Key
key code for KEY Command
35/38
0x0000
0x0012 : : :
SAS(Sub Audio Settings)
All
Analog ( CTCSS/DCS ) Digital (P25 NAC/ColorCode/RAN/Area)
All
Tone Search
NAC Search
CTCSS 67.0Hz
NAC 000h
CTCSS 69.3Hz
NAC 001h
CTCSS 71.9Hz
NAC 002h
CTCSS 74.4Hz
NAC 003h
CTCSS 77.0Hz
NAC 004h
CTCSS 79.7Hz
NAC 005h
CTCSS 82.5Hz
NAC 006h
CTCSS 85.4Hz
NAC 007h
CTCSS 88.5Hz
NAC 008h
CTCSS 91.5Hz
NAC 009h
CTCSS 94.8Hz
NAC 00Ah
CTCSS 97.4Hz
NAC 00Bh
CTCSS 100.0Hz
NAC 00Ch
CTCSS 103.5Hz
NAC 00Dh
CTCSS 107.2Hz
NAC 00Eh
CTCSS 110.9Hz
NAC 00Fh
CTCSS 114.8Hz
NAC 010h
CTCSS 118.8Hz
NAC 011h
CTCSS 123.0Hz
NAC 012h
CTCSS 127.3Hz
:
CTCSS 131.8Hz
:
CTCSS 136.5Hz
:
SAD(Sub Audio Detected)
All None
Analog ( CTCSS/DCS ) Digital (P25 NAC/ColorCode/RAN/Area)
None
None
CTCSS 67.0Hz
NAC 000h
CTCSS 69.3Hz
NAC 001h
CTCSS 71.9Hz
NAC 002h
CTCSS 74.4Hz
NAC 003h
CTCSS 77.0Hz
NAC 004h
CTCSS 79.7Hz
NAC 005h
CTCSS 82.5Hz
NAC 006h
CTCSS 85.4Hz
NAC 007h
CTCSS 88.5Hz
NAC 008h
CTCSS 91.5Hz
NAC 009h
CTCSS 94.8Hz
NAC 00Ah
CTCSS 97.4Hz
NAC 00Bh
CTCSS 100.0Hz
NAC 00Ch
CTCSS 103.5Hz
NAC 00Dh
CTCSS 107.2Hz
NAC 00Eh
CTCSS 110.9Hz
NAC 00Fh
CTCSS 114.8Hz
NAC 010h
CTCSS 118.8Hz
NAC 011h
CTCSS 123.0Hz
NAC 012h
CTCSS 127.3Hz
:
CTCSS 131.8Hz
:
CTCSS 136.5Hz
:
Sub Audio 1
36/38
0x0fff 0x1000
0x100f : : :
0x2000
CTCSS 141.3Hz CTCSS 146.2Hz CTCSS 151.4Hz CTCSS 156.7Hz CTCSS 159.8Hz CTCSS 162.2Hz CTCSS 165.5Hz CTCSS 167.9Hz CTCSS 171.3Hz CTCSS 173.8Hz CTCSS 177.3Hz CTCSS 179.9Hz CTCSS 183.5Hz CTCSS 186.2Hz CTCSS 189.9Hz CTCSS 192.8Hz CTCSS 196.6Hz CTCSS 199.5Hz CTCSS 203.5Hz CTCSS 206.5Hz CTCSS 210.7Hz CTCSS 218.1Hz CTCSS 225.7Hz CTCSS 229.1Hz CTCSS 233.6Hz CTCSS 241.8Hz CTCSS 250.3Hz CTCSS 254.1Hz DCS 006 DCS 007 DCS 015 DCS 017 DCS 021 DCS 023 DCS 025 DCS 026 DCS 031 DCS 032 DCS 036 DCS 043 DCS 047 DCS 050 DCS 051 DCS 053 DCS 054 DCS 065 DCS 071 DCS 072 DCS 073 DCS 074 DCS 114 DCS 115 DCS 116 DCS 122 DCS 125 DCS 131 DCS 132 DCS 134 DCS 141 DCS 143 DCS 145 DCS 152 DCS 155 DCS 156 DCS 162 DCS 165 DCS 172 DCS 174 DCS 205 DCS 212 DCS 214 DCS 223 DCS 225 DCS 226 DCS 243 DCS 244 DCS 245 DCS 246 DCS 251 DCS 252 DCS 255 DCS 261 DCS 263
NAC FFFh Color Code 0 Color Code 1 Color Code 2 Color Code 3 Color Code 4 Color Code 5 Color Code 6 Color Code 7 Color Code 8 Color Code 9 Color Code 10 Color Code 11 Color Code 12 Color Code 13 Color Code 14 Color Code 15
: : : RAN 0 RAN 1 RAN 2 RAN 3 RAN 4 RAN 5 RAN 6 RAN 7 RAN 8 RAN 9 RAN 10 RAN 11 RAN 12 RAN 13 RAN 14 RAN 15 RAN 16 RAN 17 RAN 18 RAN 19 RAN 20 RAN 21 RAN 22 RAN 23 RAN 24 RAN 25 RAN 26 RAN 27 RAN 28 RAN 29 RAN 30 RAN 31 RAN 32 RAN 33 RAN 34 RAN 35 RAN 36 RAN 37 RAN 38 RAN 39 RAN 40 RAN 41 RAN 42 RAN 43 RAN 44 RAN 45 RAN 46 RAN 47 RAN 48 RAN 49 RAN 50 RAN 51 RAN 52 RAN 53 RAN 54 RAN 55 RAN 56 RAN 57 RAN 58 RAN 59 RAN 60 RAN 61 RAN 62
CTCSS 141.3Hz CTCSS 146.2Hz CTCSS 151.4Hz CTCSS 156.7Hz CTCSS 159.8Hz CTCSS 162.2Hz CTCSS 165.5Hz CTCSS 167.9Hz CTCSS 171.3Hz CTCSS 173.8Hz CTCSS 177.3Hz CTCSS 179.9Hz CTCSS 183.5Hz CTCSS 186.2Hz CTCSS 189.9Hz CTCSS 192.8Hz CTCSS 196.6Hz CTCSS 199.5Hz CTCSS 203.5Hz CTCSS 206.5Hz CTCSS 210.7Hz CTCSS 218.1Hz CTCSS 225.7Hz CTCSS 229.1Hz CTCSS 233.6Hz CTCSS 241.8Hz CTCSS 250.3Hz CTCSS 254.1Hz DCS 006 DCS 007 DCS 015 DCS 017 DCS 021 DCS 023 DCS 025 DCS 026 DCS 031 DCS 032 DCS 036 DCS 043 DCS 047 DCS 050 DCS 051 DCS 053 DCS 054 DCS 065 DCS 071 DCS 072 DCS 073 DCS 074 DCS 114 DCS 115 DCS 116 DCS 122 DCS 125 DCS 131 DCS 132 DCS 134 DCS 141 DCS 143 DCS 145 DCS 152 DCS 155 DCS 156 DCS 162 DCS 165 DCS 172 DCS 174 DCS 205 DCS 212 DCS 214 DCS 223 DCS 225 DCS 226 DCS 243 DCS 244 DCS 245 DCS 246 DCS 251 DCS 252 DCS 255 DCS 261 DCS 263
NAC FFFh Color Code 0 Color Code 1 Color Code 2 Color Code 3 Color Code 4 Color Code 5 Color Code 6 Color Code 7 Color Code 8 Color Code 9 Color Code 10 Color Code 11 Color Code 12 Color Code 13 Color Code 14 Color Code 15
: : : RAN 0 RAN 1 RAN 2 RAN 3 RAN 4 RAN 5 RAN 6 RAN 7 RAN 8 RAN 9 RAN 10 RAN 11 RAN 12 RAN 13 RAN 14 RAN 15 RAN 16 RAN 17 RAN 18 RAN 19 RAN 20 RAN 21 RAN 22 RAN 23 RAN 24 RAN 25 RAN 26 RAN 27 RAN 28 RAN 29 RAN 30 RAN 31 RAN 32 RAN 33 RAN 34 RAN 35 RAN 36 RAN 37 RAN 38 RAN 39 RAN 40 RAN 41 RAN 42 RAN 43 RAN 44 RAN 45 RAN 46 RAN 47 RAN 48 RAN 49 RAN 50 RAN 51 RAN 52 RAN 53 RAN 54 RAN 55 RAN 56 RAN 57 RAN 58 RAN 59 RAN 60 RAN 61 RAN 62
0x203f : : :
0x3000 0x3001
DCS 265 DCS 266 DCS 271 DCS 274 DCS 306 DCS 311 DCS 315 DCS 325 DCS 331 DCS 332 DCS 343 DCS 346 DCS 351 DCS 356 DCS 364 DCS 365 DCS 371 DCS 411 DCS 412 DCS 413 DCS 423 DCS 431 DCS 432 DCS 445 DCS 446 DCS 452 DCS 454 DCS 455 DCS 462 DCS 464 DCS 465 DCS 466 DCS 503 DCS 506 DCS 516 DCS 523 DCS 526 DCS 532 DCS 546 DCS 565 DCS 606 DCS 612 DCS 624 DCS 627 DCS 631 DCS 632 DCS 654 DCS 662 DCS 664 DCS 703 DCS 712 DCS 723 DCS 731 DCS 732 DCS 734 DCS 743 DCS 754
RAN 63 : : :
Area 0 Area 1
DCS 265 DCS 266 DCS 271 DCS 274 DCS 306 DCS 311 DCS 315 DCS 325 DCS 331 DCS 332 DCS 343 DCS 346 DCS 351 DCS 356 DCS 364 DCS 365 DCS 371 DCS 411 DCS 412 DCS 413 DCS 423 DCS 431 DCS 432 DCS 445 DCS 446 DCS 452 DCS 454 DCS 455 DCS 462 DCS 464 DCS 465 DCS 466 DCS 503 DCS 506 DCS 516 DCS 523 DCS 526 DCS 532 DCS 546 DCS 565 DCS 606 DCS 612 DCS 624 DCS 627 DCS 631 DCS 632 DCS 654 DCS 662 DCS 664 DCS 703 DCS 712 DCS 723 DCS 731 DCS 732 DCS 734 DCS 743 DCS 754
RAN 63 : : :
Area 0 Area 1
Microsoft: Print To PDF