Weber Smokey Joe Premium Charcoal Grill

Parts and Tools

Included components:

• Lid with integrated thermometer
• Cooking grates (2)
• Charcoal grate
• Grill bowl
• Bowl carrying handle
• Lid carrying handle
• Legs (3)
• Hardware kit (screws, nuts, washers)
• U-shaped bracket
• Cylindrical sleeve

Required tools: Phillips head screwdriver, flat head screwdriver.

Assembly Instructions

Step 1: Attach Legs

Secure the three legs to the bottom exterior of the grill bowl using the provided screws and washers. Ensure they are firmly attached.

Step 2: Attach Bowl Handle

Fasten the curved bowl carrying handle to the side of the grill bowl using screws. Refer to the diagram for correct placement.

Step 3: Attach Lid Handle

Attach the lid carrying handle to the grill lid. Use screws and washers to secure it at the designated points on the lid.

Step 4: Install Grates

Place the charcoal grate inside the bottom of the grill bowl. Then, position the two cooking grates on the upper rim of the bowl.

Step 5: Install Thermometer

Insert the thermometer through the pre-drilled hole in the grill lid. From the inside of the lid, secure the thermometer using the provided nut and washer.

Step 6: Final Assembly and Carrying

The grill is now assembled. The lid handle is designed to also function as a carrying handle, allowing you to transport the grill with the lid secured.

Exploded View Diagram Description

A detailed exploded view shows all parts and their assembly order:

• 1. Lid handle
• 2. Lid
• 3. Thermometer
• 4. Cooking grate
• 5. Charcoal grate
• 6. Bowl handle
• 7. Legs (3)
• 8. Lid attachment hardware (screws, washers)
• 9. Bowl
• 10. Air vent control (located on the bowl)
• 11. Leg attachment hardware (screws, washers)