AXIS TP3201-E Recessed Mount Installation Guide

Read this first

Read through this Installation Guide carefully before installing the product. Keep the Installation Guide for future reference.

Legal considerations

Video and audio surveillance can be regulated by laws that vary from country to country. Check the laws in your local region before using this product for surveillance purposes.

Liability

Axis Communications AB cannot be held responsible for any technical or typographical errors and reserves the right to make changes to the product and manuals without prior notice. Axis Communications AB makes no warranty of any kind with regard to the material contained within this document, including, but not limited to, the implied warranties of merchantability and fitness for a particular purpose. Axis Communications AB shall not be liable nor responsible for incidental or consequential damages in connection with the furnishing, performance or use of this material. This product is only to be used for its intended purpose.

Intellectual property rights

Axis AB has intellectual property rights relating to technology embodied in the product described in this document. In particular, and without limitation, these intellectual property rights may include one or more of the patents listed at axis.com/patent and one or more additional patents or pending patent applications in the US and other countries.

Equipment modifications

This equipment must be installed and used in strict accordance with the instructions given in the user documentation. This equipment contains no user-serviceable components. Unauthorized equipment changes or modifications will invalidate all applicable regulatory certifications and approvals.

Trademark acknowledgements

AXIS COMMUNICATIONS, AXIS, ARTPEC and VAPIX are registered trademarks of Axis AB in various jurisdictions. All other trademarks are the property of their respective owners.

Contact information

Axis Communications AB
Gränden 1
22369 Lund
Sweden
Tel: +46 462721800
Fax: +46 46136130
axis.com

Warranty information

For information about Axis' product warranty and thereto related information, go to axis.com/warranty.

Support

Should you require any technical assistance, please contact your Axis reseller. If your questions cannot be answered immediately, your reseller will forward your queries through the appropriate channels to ensure a rapid response. If you are connected to the Internet, you can:

• Find answers to resolved problems in the FAQ database, search by product, category, or phrase
• Report problems to Axis support staff by logging in to your private support area
• Chat with Axis support staff
• Visit Axis Support at axis.com/support

Learn more!

Visit Axis learning center axis.com/learning for useful trainings, webinars, tutorials and guides.

Parts Included

The following parts are included with the AXIS TP3201-E Recessed Mount:

• 2x Screws
• 4x Spacers
• 2x Mounting Brackets
• 1x Recessed Mount Housing
• 1x Cover Ring
• 1x Cable Gland
• 1x Cut-out Template
• 1x 1/2" M20 Cable Gland
• 1x Ring
• 4x Screws

Installation Steps

Step 1: Prepare the Mounting Surface

Ensure the mounting surface can support a minimum weight of 6.5 kg (14 lb) and has a thickness between 10-30 mm (0.4-2.4 in). The cut-out diameter should be 200 mm (7.9 in).

Step 1.1: Cable Entry

The mount supports 1/2" (M20) and 3/4" (M25) cable entries. Select the appropriate entry for your cable.

Step 1.2: Attach Brackets

Attach the two mounting brackets to the recessed mount housing using two screws (T20). Ensure the brackets are oriented correctly for your installation.

Step 1.3: Insert Spacers

Insert the four spacers into the designated holes on the bottom of the recessed mount housing.

Step 1.4: Connect Cable

Route the network cable through the selected cable entry and connect it to the camera.

Step 1.5: Mount the Camera

Place the camera into the recessed mount housing and secure it using the four screws.

Step 1.6: Attach Cover Ring

Align the cover ring with the recessed mount housing and press down until it clicks into place.

Step 1.7: Final Assembly

Attach the cover ring to the recessed mount housing using the provided screws.

Step 2: Installing with AXIS M32-LVE and AXIS P32-LVE

Step 2.1: Disassemble Camera

Remove the outer casing of the AXIS M32-LVE or AXIS P32-LVE camera.

Step 2.2: Mount Camera to Housing

Place the camera assembly into the recessed mount housing.

Step 2.3: Secure Camera

Secure the camera to the housing using the four screws.

Step 2.4: Attach Cover Ring

Align and attach the cover ring to the housing.

Step 2.5: Final Attachment

Secure the cover ring with the provided screws.

Step 3: Installing with AXIS P3245-VE

Step 3.1: Disassemble Camera

Remove the outer casing and dome cover of the AXIS P3245-VE camera.

Step 3.2: Mount Camera to Housing

Place the camera assembly into the recessed mount housing.

Step 3.3: Secure Camera

Secure the camera to the housing using the four screws.

Step 3.4: Attach Cover Ring

Align and attach the cover ring to the housing.

Step 3.5: Final Attachment

Secure the cover ring with the provided screws.

Safety Information

Hazard Levels

• ADANGER: Indicates a hazardous situation which, if not avoided, will result in death or serious injury.
• A WARNING: Indicates a hazardous situation which, if not avoided, could result in death or serious injury.
• A CAUTION: Indicates a hazardous situation which, if not avoided, could result in minor or moderate injury.
• NOTICE: Indicates a situation which, if not avoided, could result in damage to property.

Other Message Levels

• Important: Indicates significant information which is essential for the product to function correctly.
• Note: Indicates useful information which helps in getting the most out of the product.

Safety Instructions

• The Axis product shall be used in compliance with local laws and regulations.
• Store the Axis product in a dry and ventilated environment.
• Use only applicable tools when installing the Axis product. Using excessive force with power tools could cause damage to the product.
• Do not use chemicals, caustic agents, or aerosol cleaners.
• Use a clean cloth dampened with pure water for cleaning.
• Use only accessories that comply with the technical specification of your product. These can be provided by Axis or a third party. Axis recommends using Axis power source equipment compatible with your product.
• Use only spare parts provided by or recommended by Axis.
• Do not attempt to repair the product yourself. Contact Axis support or your Axis reseller for service matters.

Transportation

• When transporting the Axis product, use the original packaging or equivalent to prevent damage to the product.