ONE-TOUCH DIGITAL WATER TIMER USER MANUAL

Model: ITV102P-V1

Technical Data

Watering Frequency	12Hours/24Hours/48 Hours/Week
Watering Duration	3-10Min, 30-90Min, 60-120Min
Max working pressure	8Bar(120PSI)
Working temperature	3°C-50°C(38°F-120°F)
Waterproof	IP54
Max flowing	35L/Min
Battery	3*AAA Alkaline Batteries
Battery life	Approx.1 year

Battery Installation

For optimal performance, use alkaline batteries. Non-alkaline batteries may lead to incorrect operation.

Unscrew the controller from the water timer housing by hand.
Remove the cap of the battery compartment located on the back of the cover. Ensure the compartment is clean.
Insert three 1.5V AAA alkaline batteries (not included) into the compartment, paying close attention to the correct polarity as indicated.
Securely close the battery compartment and replace the front cover. Ensure the cable is correctly positioned to maintain integrity and functionality.

Upon powering on, all LED lights will illuminate for one second before turning off. Subsequent operations can be performed once the lights are off.

Timer Installation

Screw the sleeve nut of the water timer onto the outdoor hose faucet. Tighten firmly to prevent leaks.

A diagram shows the timer being attached to a faucet, with a barcode visible on the timer's body.

Warnings

Low Battery: The timer will cease operation, and the 'OFF' LED indicator will flash red when battery power is low.
Do not expose the timer to frost.
Only use clear, fresh, cold water.
Remove and store the timer in a dry place during the winter season.
When replacing batteries, replace all batteries simultaneously and reset the parameters.

Operation

Watering Time and Watering Frequency

The timer offers multiple scheduling options:

3, 5, or 10 minute watering times for every 12 hours.
30, 60, or 90 minute watering times for every 24 hours.
30, 60, or 90 minute watering times for every 48 hours.
60, 90, or 120 minute watering times for every week.

This provides a total of 12 plans for easy scheduling of your drip system.

A graphic illustrates these combinations using a circular dial, showing intervals like 12H, 24H, 48H, and WEEK, paired with durations such as 30 MIN, 60 MIN, 90 MIN, and 120 MIN.

Set Watering Duration and Frequency

After installing batteries, the LED light will flash. Press the setting button, and the LED will move clockwise, allowing you to select the specified watering duration.

For example, a diagram shows a setting for 90 minutes watering duration and a 24-hour watering frequency, indicated by the LED positions on a circular display.

Start Watering

Once the watering duration and frequency are set, wait for 4 seconds. The LED light will begin to flash with an audible "Da" sound, indicating the valve in the timer has opened.

During watering, the LED light will flash every 4 seconds until the watering cycle concludes.

An example graphic shows a setting for 10 minutes of watering every 12 hours.

Stop Watering

While watering is in progress, press the setting button for 3 seconds. The water timer will stop, and a red light will illuminate on the 'OFF' indicator.

Manual Watering

To initiate manual watering, press the setting button continuously. The LED light will move clockwise to the 'MANUAL' indicator. After waiting for 4 seconds, watering will commence.

	RainPoint ITV205 Water Timer User Manual Comprehensive user guide for the RainPoint ITV205 automatic garden hose timer, covering setup, programming for multiple zones, rain delay, manual watering, troubleshooting, and maintenance.
	RainPoint 1-Zone Water Timer User Manual (Model ITV105) Comprehensive user manual for the RainPoint ITV105 1-Zone Water Timer, detailing installation, programming, additional functions like Rain Delay and Manual Watering, troubleshooting, precautions, and warranty information.
	RainPoint Quickdial Automatic Hose Timer User Manual ITV152 Comprehensive user manual for the RainPoint Quickdial Automatic Hose Timer (Model No. ITV152). This guide covers product overview, specifications, installation, programming irrigation duration and frequency, manual operation, cleaning, troubleshooting, precautions, warranty policy, and customer support.
	RainPoint Mini Digital Tap Timer User Manual Comprehensive user manual for the RainPoint Mini Digital Tap Timer (ITV105), covering installation, setup, features like rain delay and manual watering, troubleshooting, and warranty information.
	RainPoint ITV105 Automatic Water Timer User Manual User manual for the RainPoint ITV105 automatic water timer, detailing installation, programming, operation, maintenance, and troubleshooting for efficient garden watering.
	RainPoint ITV201P User Manual: Smart Two-Zone Sprinkler Timer Guide User manual for the RainPoint ITV201P sprinkler timer. Learn installation, programming, and troubleshooting for efficient dual-zone garden watering. Includes contact info and support.
	RainPoint ITV517 Digital Water Timer User Manual User manual for the RainPoint ITV517 Multi-Programming Digital Water Timer, providing detailed instructions for installation, programming, and operation to optimize garden watering and conserve water.
	RainPoint ITV305/ITV405 Quick Start Guide: Easy Hose Timer Setup Get your RainPoint ITV305 and ITV405 hose timers up and running quickly with this easy-to-follow quick start guide. Learn installation, battery insertion, programming, and troubleshooting for your garden watering.