User Manual. Safety: Mi Power Bank has multiple safeguard technologies to provide over-charge, over-discharge, high temperature, and short circuit protection in all working conditions. Efficiency: Fast charging. Compatibility: Built-in smart USB charge controller, compatible with mainstream mobile phones
Read this manual carefully before use, and retain it for future reference. Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Zimi Corporation (a Mi Ecosystem company) Address...
5000mAh Mi Power Bank 2 User Manual Product Overview Thank you for choosing 5000mAh Mi Power Bank 2. This product is a high-capacity portable charger that uses Li-polymer ba ery, charge and discharge chip for a safe, efficient, and compatible user experience. USB Output Micro-USB Input Power Check Power Indicator The Power Check bu on is not a Power bu on. 5000mAh Mi Power Bank 2 detects charging and discharging automatically. The Power indicator goes off 2 minutes a er fully discharged. Safety: Mi Power Bank has multiple safeguard technologies to provide over-charge, over-discharge, high temperature, and short circuit protection in all working conditions. Efficiency: Fast charging. Compatibility: Built-in smart USB charge controller, compatible with mainstream mobile phones and digital devices. Quality: Li-polymer ba ery, charge and discharge chip. Charging Connect with Mi Power Adapter to charge Mi Power Bank. The indicator shows charging conditions as follows: LED1 LED3 LED2 LED4 Power level 0-25% 25-50% 50-75% 75-99% Fully charged Charging error LED1 Blinking On On On On Blinking LED2 Off Blinking On On On Blinking LED3 Off Off Blinking On On Blinking LED4 Off Off Off Blinking On Blinking Discharging Connect with Mi Power Bank to charge your device. The indicator shows discharging conditions as follows: Power level Undervoltage 0-25% 25-50% 50-75% 75-100% LED1 Off Blinking Blinking Blinking Blinking LED2 Off Off Blinking Blinking Blinking LED3 Off Off Off Blinking Blinking LED4 Off Off Off Off Blinking Low-current discharge: when Mi Power Bank is not charging, double press the Power Check bu on to enter low-current discharge mode to charge small devices, such as Bluetooth headphones and smart bands. The indicator LEDs will turn on one by one in succession, indicating that Mi Power Bank is in low-current discharge mode. To exit low-current discharge mode, press the Power Check bu on. Specifications Model: PLM10ZM Ba ery type: Li-polymer ba ery Capacity: 5000mAh 3.7V (18.5Wh) Rated capacity: 3300mAh 5.1V (TYP 1A) Operating temperature: 0°C~40°C Dimensions: 127 × 68.9 × 10.7 mm Input port: Micro-USB Output port: USB-A Input: 5.0V 2.0A Output: 5.1V 2.1A Charging time: 2.7 hours (5V/2A charger, with USB cable included) Important Safeguards Make sure your Mi Power Bank is fully charged on its first use. When charging a device with Mi Power Bank, make sure your device displays the ba ery charging icon and the Mi Power Bank is working properly. When recharging Mi Power Bank or charging a device with Mi Power Bank, make sure you use a standard charging cable. If all indicators go off when charging a device with Mi Power Bank, recharge your Mi Power Bank shortly. When charging a device with Mi Power Bank, the device will use Mi Power Bank's power first. Disconnect Mi Power Bank to avoid further discharge once your device is fully charged. When Mi Power Bank enters protection mode (LEDs remain off a er pressing the Power Check bu on) due to short circuit or other reasons, charge it with an external charger to resume. WARNING Mi Power Bank contains Li-ion ba ery cell. Do not open the casing to avoid cell damage or other hazards. Do not dismantle, crush, puncture and short circuit Mi Power Bank, or expose it to liquids, fire or environments where the temperature is above 60°C (140°F). CE Hereby,declares that this equipment is in compliance with the Electromagnetic Compatibility Directive 2014/30/EU. Test standards: EN55032:2015 / EN61000-3-2:2014 / EN61000-3-3:2013 / EN55024:2010 Anti-counterfeit Label Instructions Each Mi Power Bank comes with an anti-counterfeit label on the outer package. Scratch the coating and go to h p://chaxun.mi.com to check authentication. Anti-counterfeit label Scratched-off label For further information, please go to www.mi.com Read this manual carefully before use, and retain it for future reference. Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Zimi Corporation (a Mi Ecosystem company) Address: A913, No. 159 Cheng iang Middle Road, Jiangyin, Jiangsu, China Manufactured for: Xiaomi Communications Co., Ltd. Manufactured by: Zimi Corporation (a Mi Ecosystem company) Address: A913, No. 159 Cheng iang Middle Road, Jiangyin, Jiangsu, ChinaAdobe PDF library 15.00